Пример #1
0
def bell(length=22050, freq=220, amp=0.5):
    ding = dsp.read('/home/hecanjog/sounds/vibesc1.wav').data
    ding = dsp.amp(ding, dsp.rand(0.5, 0.8))

    bell = dsp.read('/home/hecanjog/sounds/tones/bellc.wav').data
    bell = dsp.amp(bell, dsp.rand(10, 50))
    bell = dsp.amp(bell, 0.3)

    rhodes = dsp.read('/home/hecanjog/sounds/tones/rhodes.wav').data
    rhodes = dsp.transpose(rhodes, 1.2)
    rhodes = dsp.pan(rhodes, dsp.rand())

    glade = dsp.read('/home/hecanjog/sounds/glade.wav').data
    numgs = dsp.randint(2, 6)

    gs = []
    for _ in range(numgs):
        g = dsp.rcut(glade, dsp.mstf(100, 500))
        g = dsp.amp(g, dsp.rand(0.2, 0.5))
        g = dsp.pan(g, dsp.rand())
        g = dsp.transpose(g, dsp.rand(0.15, 0.75))

        gs += [ g ]

    gs = dsp.mix(gs)
    gs = dsp.env(gs, 'phasor')

    clump = dsp.mix([ ding, gs, bell, rhodes ])

    clump = dsp.transpose(clump, freq / tune.ntf('c', octave=4))
    clump = dsp.fill(clump, length, silence=True)
    clump = dsp.env(clump, 'phasor')
    clump = dsp.amp(clump, amp)

    return clump
Пример #2
0
def makeKick(length, i):
    k = dsp.randchoose([ kickhard, kicksoft ])
    k = dsp.mix([ k, dsp.env(sock, 'phasor') ])
    if dsp.rand() > 0.4:
        k = dsp.env(k, 'phasor')

    return dsp.fill(k, length, silence=True)
Пример #3
0
def fracture(snd):
    numpoints = dsp.randint(3, 20)
    poscurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0], numpoints)
    poscurve = [ p * (dsp.flen(snd) - dsp.mstf(210)) for p in poscurve ]

    lencurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0], numpoints)
    lencurve = [ l * dsp.mstf(200) + dsp.mstf(10) for l in lencurve ]

    pancurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0], numpoints)

    prepadcurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0], numpoints)
    prepadcurve = [ int(p * dsp.mstf(20)) for p in prepadcurve ]

    postpadcurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0], numpoints)
    postpadcurve = [ int(p * dsp.mstf(20)) for p in postpadcurve ]

    speeds = [1.0, 2.0, 0.5, 0.75]

    grains = [ dsp.cut(snd, poscurve[i], lencurve[i]) for i in range(numpoints) ]
    grains = [ dsp.pan(grains[i], pancurve[i]) for i in range(numpoints) ]
    grains = [ dsp.env(grain, 'gauss', True) for grain in grains ]
    grains = [ dsp.transpose(grain, dsp.randchoose(speeds)) for grain in grains ]
    grains = [ dsp.pad(grains[i], prepadcurve[i], postpadcurve[i]) for i in range(numpoints) ]

    for i in range(numpoints):
        if dsp.randint(0, 3) == 0:
            grains[i] = slurp(grains[i])

    etypes = ['line', 'phasor', 'tri', 'sine', 'gauss']

    snd = dsp.env(''.join(grains), dsp.randchoose(etypes))
    snd = dsp.pad(snd, 0, dsp.mstf(dsp.rand(100, 400)))

    return snd
Пример #4
0
    def play(self, freq, length, amp=1):
        snd = dsp.transpose(self.snd, freq / self.freq)
        snd = dsp.taper(snd, 40)
        snd = dsp.amp(snd, amp)

        if self.direction == 'fw':
            snd = dsp.env(snd, self.env)
            snd = dsp.fill(snd, length, silence=True)

        if self.direction == 'fw-loop':
            snd = dsp.fill(snd, length, silence=False)
            snd = dsp.env(snd, self.env)

        if self.direction == 'fw-loop-rand':
            snd = dsp.env(snd, self.env)
            elapsed = 0
            sndout = ''
            while elapsed < length:
                sndout += dsp.pad(snd, 0, dsp.randint(0, dsp.flen(snd)))
                elapsed = dsp.flen(sndout)

            snd = dsp.fill(sndout, length, silence=False)

        if self.direction == 'fw-bw-loop':
            snd = dsp.fill(snd + dsp.reverse(snd), length, silence=False)
            snd = dsp.env(snd, self.env)

        if self.tails:
            snd = dsp.mix([ snd, self.makeTails(freq, length) ])

        return snd
Пример #5
0
        def makeArps(seg, oct=3, reps=4):
            arp_degrees = [1,2,3,5,8,9,10]
            if dsp.randint(0,1) == 0:
                arp_degrees.reverse()

            arp_degrees = dsp.rotate(arp_degrees, vary=True)
            arp_notes = tune.fromdegrees(arp_degrees[:reps], oct, 'e')

            arps = ''

            arp_count = 0
            for arp_length in seg:
                arp_length /= 2
                arp_pair = arp_notes[ arp_count % len(arp_notes) ], arp_notes[ (arp_count + 1) % len(arp_notes) ]

                arp_one = dsp.tone(arp_length, wavetype='tri', freq=arp_pair[0], amp=0.075)
                arp_one = dsp.env(arp_one, 'random')

                arp_two = dsp.tone(arp_length, wavetype='tri', freq=arp_pair[1], amp=0.08)
                arp_two = dsp.env(arp_two, 'random')

                arps += arp_one + arp_two
                arp_count += 2

            arps = dsp.env(arps, 'random')
            arps = dsp.pan(arps, dsp.rand())

            return arps
Пример #6
0
def spider(snd, numlayers=10, numgrains=20, minlen=40, lenranges=(300,500), reverse=False, env='hann'):
    layers = []

    for layer in range(numlayers):
        lenrange = dsp.rand(lenranges[0], lenranges[1])

        if reverse:
            lengths = dsp.wavetable(env, numgrains * 2)[numgrains:]
        else:
            lengths = dsp.wavetable(env, numgrains * 2)[:numgrains]

        lengths = [ dsp.mstf(l * lenrange + minlen) for l in lengths ]
        pans = dsp.breakpoint([ dsp.rand() for p in range(numgrains / 3)], numgrains)

        startpoint = dsp.randint(0, dsp.flen(snd) - max(lengths))
    
        grains = ''

        for l, p in zip(lengths, pans):
            grain = dsp.cut(snd, startpoint, l)
            grain = dsp.env(grain, 'phasor')
            grain = dsp.taper(grain, dsp.mstf(10))
            grain = dsp.pan(grain, p)
            
            grains += grain

        if reverse:
            layers += [ dsp.env(grains, 'line') ]
        else:
            layers += [ dsp.env(grains, 'phasor') ]

    return dsp.mix(layers)
Пример #7
0
def play(voice_id):
    bpm = config('bpm')
    key = config('key')
    quality = getattr(tune, config('quality')) 
    ratios = getattr(tune, config('tune')) 

    beat = dsp.bpm2frames(bpm)
    nlen = beat / dsp.randchoose([4,5,6,7,8,9,10])

    root = 340.0
    target = tune.ntf(key)

    n = dsp.read('sounds/mike.wav').data
    n = dsp.transpose(n, target / root)
    n = dsp.amp(n, 0.4)

    length = dsp.randint(16, 64) * beat
    ngrains = length / nlen

    n = dsp.transpose(n, dsp.randchoose([0.5, 1, 2, 2, 4, 4]))
    n = dsp.split(n, nlen)

    snd = dsp.randchoose(n)
    snd = dsp.env(snd, 'sine')

    grains = [ snd for i in range(ngrains) ]
    grains = [ dsp.pan(grain, dsp.rand()) for grain in grains ]

    out = ''.join(grains)
    out = dsp.env(out, 'sine')

#    out = dsp.pad(out, 0, dsp.stf(dsp.randint(0.5, 3)))

    return out
Пример #8
0
def ping(maxlen=44100, freqs=None):
    out = ''

    if freqs is None:
        freqs = [ dsp.rand(20,10000) for i in range(4) ]

    tlen = dsp.randint(10, maxlen)

    tones = [ dsp.tone(length=tlen, freq=freq, amp=0.1, wavetype='random') 
            for freq in freqs ]

    tones = [ dsp.split(tone, 64) for tone in tones ]

    pcurves = [ dsp.breakpoint([ dsp.rand() for t in range(len(tones[i]) / 20) ],
            len(tones[i])) for i in range(len(tones)) ]

    tones = [ [ dsp.pan(t, pcurves[i][ti]) for ti, t in enumerate(tones[i]) ] 
            for i in range(len(tones)) ]

    fcurves = [ dsp.breakpoint([ dsp.rand(0.0, 0.1) + 0.9 for t in range(len(tones[i]) / 20) ],
            len(tones[i])) for i in range(len(tones)) ]

    tones = [ [ dsp.transpose(t, fcurves[i][ti] + 0.1) for ti, t in enumerate(tones[i]) ] 
            for i in range(len(tones)) ]

    out = dsp.mix([ dsp.env(''.join(tone), 'random') for tone in tones ])
    out = dsp.env(out, 'random')
    out = dsp.pad(out, 0, dsp.randint(0, maxlen * 3))

    return out
Пример #9
0
def fade(snd, time=dsp.mstf(1)):
    first = dsp.cut(snd, 0, time)
    middle = dsp.cut(snd, time, dsp.flen(snd) - (time * 2))
    last = dsp.cut(snd, dsp.flen(middle) + time, time)

    snd = dsp.env(first, 'line') + middle + dsp.env(last, 'phasor')

    return snd
Пример #10
0
def fade(snd, time=dsp.mstf(1)):
    first = dsp.cut(snd, 0, time)
    middle = dsp.cut(snd, time, dsp.flen(snd) - (time * 2))
    last = dsp.cut(snd, dsp.flen(middle) + time, time)

    snd = dsp.env(first, 'line') + middle + dsp.env(last, 'phasor')
    
    return snd
Пример #11
0
        def hat(length):
            if dsp.randint(0, 6) == 0:
                out = bln(length, 9000, 14000)
                out = dsp.env(out, 'line')
            else:
                out = bln(int(length * 0.05), 9000, 14000)
                out = dsp.env(out, 'phasor')
                out = dsp.pad(out, 0, length - dsp.flen(out))

            return out
Пример #12
0
        def makeGrains(out, length=None, env=None):
            envs = ['tri', 'line', 'flat', 'sine', 'hann']
            out = dsp.vsplit(out, dsp.mstf(20), dsp.mstf(90))

            out = [ dsp.env(grain, 'hann') for grain in out ]
            out = [ dsp.pan(grain, dsp.rand()) for grain in out ]

            out = dsp.randshuffle(out)
            out = ''.join(out)
            out = dsp.env(out, dsp.randchoose(envs))

            return out
Пример #13
0
        def makeGrains(out, length=None, env=None):
            envs = ['tri', 'line', 'flat', 'sine', 'hann']
            out = dsp.vsplit(out, dsp.mstf(20), dsp.mstf(90))

            out = [dsp.env(grain, 'hann') for grain in out]
            out = [dsp.pan(grain, dsp.rand()) for grain in out]

            out = dsp.randshuffle(out)
            out = ''.join(out)
            out = dsp.env(out, dsp.randchoose(envs))

            return out
Пример #14
0
    def hat(length):
        lowf = dsp.rand(600, 7000)
        highf = dsp.rand(7000, 19000)
        
        if dsp.randint(0, 6) == 0:
            out = dsp.bln(length, lowf, highf)
            out = dsp.env(out, 'line')
        else:
            out = dsp.bln(int(length * 0.05), lowf, highf)
            out = dsp.env(out, 'phasor')
            out = dsp.pad(out, 0, length - dsp.flen(out))

        return out
Пример #15
0
    def hat(length):
        lowf = dsp.rand(6000, 11000)
        highf = dsp.rand(11000, 17000)

        if dsp.randint(0, 6) == 0:
            out = bln(length, lowf, highf)
            out = dsp.env(out, 'line')
        else:
            out = bln(int(length * 0.05), lowf, highf)
            out = dsp.env(out, 'phasor')
            out = dsp.pad(out, 0, length - dsp.flen(out))

        return out
Пример #16
0
def smear(input, mingrain=2205, maxgrain=4410, waveform='hann', spread=0.1, drift=0.05, minpan=0.0, maxpan=1.0, minamp=0.0, maxamp=1.0):
    out = dsp.vsplit(input, mingrain, maxgrain)
    out = [ dsp.amp(grain, dsp.rand(minamp, maxamp)) for grain in out ]
    out = [ dsp.env(grain, waveform) for grain in out ]
    out = [ dsp.pan(grain, dsp.rand(minpan, maxpan)) for grain in out ]
    drift_delta = drift / 2.0
    minspeed = 1.0 - drift_delta
    maxspeed = 1.0 + drift_delta

    out = [ dsp.transpose(grain, dsp.rand(minspeed, maxspeed)) for grain in out ]

    num_shuffled_grains = int(len(out) * spread)

    # Pull a random set of grains
    shuffled_grains = []
    for i in range(num_shuffled_grains):
        index = dsp.randint(0, len(out) - 1)
        shuffled_grains += [ out.pop(index) ] 

    # Insert them back into random positions
    for grain in shuffled_grains:
        index = dsp.randint(0, len(out) - 1)
        out.insert(index, grain)

    out = ''.join(out)

    return out
Пример #17
0
def chirp():
    r = dsp.rand(3.6, 3.99)
    numpoints = dsp.randint(10, 30)

    freq = dsp.rand(200, 1000)
    slength = dsp.rand(0.05, 0.5)
    length = dsp.stf(slength)

    log = data.Logistic(r, size=numpoints)
    mod = dsp.breakpoint([0] + [dsp.rand()
                                for r in range(numpoints / 3)] + [0],
                         numpoints)
    mod = [p * log.get() for p in mod]
    modr = dsp.rand(1, 5)
    modf = 1.0 / slength

    wf = dsp.wavetable('sine2pi', 512)
    win = dsp.wavetable('sine', 512)
    pw = dsp.rand(0.5, 1)
    amp = dsp.rand(0.1, 0.3)

    out = dsp.pulsar(freq, length, pw, wf, win, mod, modr, modf, amp)
    out = dsp.env(out, 'random')
    out = dsp.taper(out, dsp.mstf(10))
    out = dsp.pan(out, dsp.rand())
    out = dsp.pad(out, 0, dsp.stf(dsp.rand(0.1, 0.3)))

    return out
Пример #18
0
def makeRhodes(length, beat, freqs):
    root = tune.ntf(key, 2)

    for i, freq in enumerate(freqs):
        if freq > root * 2.5:
            freqs[i] = freq * 0.5

    chord = [ keys.rhodes(length, freq, dsp.rand(0.4, 0.6)) for freq in freqs ]
    chord = dsp.randshuffle(chord)
    pause = 0
    for i, c in enumerate(chord):
        pause = pause + (dsp.randint(1, 4) * beat)
        c = dsp.pan(c, dsp.rand())
        chord[i] = dsp.pad(dsp.fill(c, length - pause), pause, 0)

    chord = dsp.mix(chord)

    chord = dsp.split(chord, dsp.flen(chord) / 16)
    chord = dsp.randshuffle(chord)
    chord = [ dsp.env(ch, 'phasor') for ch in chord ]

    chord = [ dsp.mix([ dsp.amp(dsp.pan(grain, dsp.rand()), dsp.rand(0.1, 0.8)), dsp.amp(dsp.pan(dsp.randchoose(chord), dsp.rand()), dsp.rand(0.1, 0.8)) ]) for grain in chord ]
    chord = ''.join(chord)

    return chord
Пример #19
0
def play(ctl):
    freq = tune.ntf(dsp.randchoose(['eb']), octave=dsp.randint(0,2))

    synth = keys.rhodes(dsp.stf(4), freq)

    s = dsp.vsplit(synth, dsp.mstf(50), dsp.mstf(2000))
    s = dsp.randshuffle(s)
    #s = [ dsp.alias(ss) for ss in s ]
    s = [ dsp.amp(ss, dsp.rand(0.5, 0.75)) for ss in s ]
    s = [ dsp.pan(ss, dsp.rand(0, 1)) for ss in s ]
    s = ''.join(s)
    s = dsp.fill(s, dsp.flen(synth))

    s2 = dsp.vsplit(synth, dsp.mstf(150), dsp.mstf(1500))
    s2 = dsp.randshuffle(s2)
    s2 = [ dsp.transpose(ss, dsp.randchoose([1,1.5,2,3,4,8])) for ss in s2 ]
    s2 = [ dsp.env(ss, 'phasor') for ss in s2 ]
    s2 = ''.join(s2)


    out = dsp.mix([ s, s2 ])

    out = dsp.amp(out, 1.5)

    out = dsp.transpose(out, 1.01) 
#synth = dsp.fill(synth, dsp.flen(main))

#out = synth

    return out
Пример #20
0
def smear(snd):
    snd = dsp.split(snd, dsp.mstf(dsp.rand(5000, 10000)))
    snd = dsp.randshuffle(snd)
    snd = [dsp.env(s) for s in snd]
    snd = [s * dsp.randint(1, 8) for s in snd]

    return dsp.drift(''.join(snd), dsp.rand(0.01, 0.1))
Пример #21
0
def makeHat(length, i):
    h = dsp.bln(length / 4, dsp.rand(6000, 8000), dsp.rand(9000, 16000))
    h = dsp.amp(h, dsp.rand(0.5, 1))
    h = dsp.env(h, 'phasor')
    h = dsp.fill(h, length, silence=True)

    return h
Пример #22
0
def play(ctl):
    dpc = ctl.get('midi').get('dpc')
    lpd = ctl.get('midi').get('lpd')

    print lpd.get(1)

    dpc.setOffset(111)
    pw = dpc.get(1, low=0.01, high=1)

    scale = [1, 2, 3, 6, 9]
    scale = [1, 4, 6, 8]
    scale = [1, 3, 5, 9]
    scale = tune.fromdegrees(scale, octave = dpc.geti(4, low=0, high=4))

    freq = dsp.randchoose(scale)

    length = dsp.stf(dpc.get(2, low=0.1, high=8) * dsp.rand(0.5, 1.5))
    wf = dsp.wavetable('sine2pi')
    win = dsp.wavetable('sine')
    mod = [ dsp.rand(0, 1) for m in range(1000) ]
    modr = dpc.get(5, low=0, high=0.3)
    modf = dpc.get(6, low=0.001, high=10)
    amp = dpc.get(3, low=0, high=1)

    out = dsp.pulsar(freq, length, pw, wf, win, mod, modr, modf, amp)

    out = dsp.env(out, dsp.randchoose(['sine', 'tri']))
    out = dsp.pan(out, dsp.rand())

    return out
Пример #23
0
def play(voice_id):
    bpm = config('bpm')
    beat = dsp.bpm2frames(bpm)

    root = config('key')
    quality = getattr(tune, config('quality')) 
    ratios = getattr(tune, config('tune')) 

    bar = beat * dsp.randchoose([8, 16, 32])

    groot = tune.ntf('c') 

    scale = tune.fromdegrees([1,3,5,6,8,9], root=root, octave=2, ratios=ratios)

    v = dsp.read('sounds/vibesc1.wav').data

    out = ''

#    lens = [ bar / 5, bar / 8, bar / 12 ]
    lens = [ bar / 6, bar / 8, bar / 16 ]

    maxbend = 2
    maxbend = 0.02

    layers = []

    for nlen in lens:
        layer = ''

        nlen /= 2

        note = dsp.transpose(v, (dsp.randchoose(scale) * 2**dsp.randint(0, 3)) / groot)
        note = dsp.fill(note, nlen)
        note = dsp.env(note, 'phasor')
        note = dsp.amp(note, 0.125)

        nbeats = bar / nlen
        for b in range(nbeats):
            b = dsp.pan(note, dsp.rand())
            b = dsp.drift(b, dsp.rand(0, dsp.rand(0.01, maxbend)))

            if dsp.flen(b) < nlen:
                b = dsp.pad(b, 0, nlen - dsp.flen(b))

#            if dsp.rand() > 0.5:
#                b = dsp.vsplit(b, dsp.flen(b) / 3, dsp.flen(b) / 2)
#                b = dsp.randshuffle(b)
#                b = [ dsp.amp(bb, dsp.rand(0.5, 2)) for bb in b ]
#                b = ''.join(b)

            layer += b

#        layer = dsp.fill(layer, bar)

        layers += [ layer ]

    out = dsp.mix(layers)
    out = dsp.fill(out, bar)

    return out
Пример #24
0
def makeRhodes(length, beat, freqs):
    root = tune.ntf(key, 2)

    for i, freq in enumerate(freqs):
        if freq > root * 2.5:
            freqs[i] = freq * 0.5

    chord = [keys.rhodes(length, freq, dsp.rand(0.4, 0.6)) for freq in freqs]
    chord = dsp.randshuffle(chord)
    pause = 0
    for i, c in enumerate(chord):
        pause = pause + (dsp.randint(1, 4) * beat)
        c = dsp.pan(c, dsp.rand())
        chord[i] = dsp.pad(dsp.fill(c, length - pause), pause, 0)

    chord = dsp.mix(chord)

    chord = dsp.split(chord, dsp.flen(chord) / 16)
    chord = dsp.randshuffle(chord)
    chord = [dsp.env(ch, "phasor") for ch in chord]

    chord = [
        dsp.mix(
            [
                dsp.amp(dsp.pan(grain, dsp.rand()), dsp.rand(0.1, 0.8)),
                dsp.amp(dsp.pan(dsp.randchoose(chord), dsp.rand()), dsp.rand(0.1, 0.8)),
            ]
        )
        for grain in chord
    ]
    chord = "".join(chord)

    return chord
Пример #25
0
def play(voice_id):
    tel = bot.getTel()

    degrees = [ dsp.randchoose([1, 2, 3, 5, 6, 8]) for f in range(dsp.randint(2, 20)) ]
    #degrees = [ dsp.randchoose([1, 5, 6, 7, 8]) for f in range(dsp.randint(2, 10)) ]

    octave = dsp.randint(1, 4)

    freqs = tune.fromdegrees(degrees, root='c', octave=octave, ratios=tune.terry)

    out = ''

    for r in range(dsp.randint(2, 20)):
        freq = dsp.randchoose(freqs)
        waveform = dsp.randchoose(['tri', 'sine2pi'])

        length = dsp.randint(dsp.mstf(1), dsp.mstf(4000))
        #length = dsp.mstf(1500)
        #length = dsp.mstf(2500)

        pulsewidth = dsp.rand(0.01, 1)

        mod = dsp.breakpoint([ dsp.rand() for b in range(int(round(tel['density'])) + 3) ], 512)
        window = dsp.breakpoint([0] + [ dsp.rand() for b in range(int(round(tel['harmonicity'] * 2)) + 3) ] + [0], 512)
        waveform = dsp.breakpoint([0] + [ dsp.rand(-1, 1) for b in range(int(round(tel['roughness'] * dsp.randint(1, 4))) + 3) ] + [0], 512)

        modRange = dsp.rand(0.01, 100.08)

        modFreq = dsp.rand(0.0001, 5)

        volume = dsp.rand(0.2, 0.3) * (tel['density'] / 10.0)
        #volume = dsp.rand(0.2, 0.8)

        t = dsp.pulsar(freq, length, pulsewidth, waveform, window, mod, modRange, modFreq, volume)
        #t = dsp.tone(length, freq, waveform)

        t = dsp.pan(t, dsp.rand())

        t = dsp.alias(t)

        t = dsp.amp(t, dsp.rand(0.5, 15.0))

        t = dsp.pad(t, 0, dsp.randint(dsp.mstf(1), dsp.mstf(10)))

        t = dsp.amp(t, dsp.rand(0.5, 0.95))

        t = dsp.env(t, 'sine')
        #t = dsp.env(t, 'phasor')

        #t = dsp.pine(t, dsp.flen(t) * 4, freq)

        out += t


    dsp.log('')
    dsp.log('boone')
    dsp.log('%s length: %.2f' % (voice_id, dsp.fts(dsp.flen(out))))
    bot.show_telemetry(tel)

    return out
Пример #26
0
def make_pulse(snd):
    snd_len = dsp.flen(snd)
    blip = dsp.cut(snd, 0, dsp.mstf(10))
    blip = dsp.env(blip, 'sine')
    blip = dsp.pad(blip, 0, snd_len - dsp.flen(blip))

    return blip
Пример #27
0
def smear(snd):
    snd = dsp.split(snd, dsp.mstf(dsp.rand(5000, 10000)))
    snd = dsp.randshuffle(snd)
    snd = [ dsp.env(s) for s in snd ]
    snd = [ s * dsp.randint(1, 8) for s in snd ]

    return dsp.drift(''.join(snd), dsp.rand(0.01, 0.1))
Пример #28
0
def play(args):
    length = dsp.stf(0.2)
    volume = 0.2 
    octave = 2 
    notes = ['d', 'a']
    quality = tune.major
    waveform = 'sine'
    ratios = tune.terry

    wtypes = ['sine', 'phasor', 'line', 'saw']

    for arg in args:
        a = arg.split(':')

        if a[0] == 't':
            length = dsp.stf(float(a[1]))

        if a[0] == 'v':
            volume = float(a[1]) / 100.0

        if a[0] == 'o':
            octave = int(a[1])

        if a[0] == 'n':
            notes = a[1].split('.')

        if a[0] == 'q':
            if a[1] == 'M':
                quality = tune.major
            elif a[1] == 'm':
                quality = tune.minor
            else:
                quality = tune.major

        if a[0] == 'tr':
            ratios = getattr(tune, a[1], tune.terry)

    harm = range(1, 12)

    layers = []
    for note in notes:
        freq = tune.ntf(note, octave, ratios) 
        #tonic = dsp.env(dsp.amp(dsp.tone(length, freq, 'sine2pi'), 0.2), 'phasor') * 500

        tones = []

        for t in range(4):
            angles = dsp.breakpoint([ freq * dsp.randchoose(harm) for f in range(dsp.randint(2, 20)) ], 100)
            angles = [ dsp.env(dsp.tone(length, a, 'sine2pi'), 'sine', amp=0.2) for a in angles ]
            tones += [ ''.join(angles) ]

        #layer = dsp.benv(dsp.mix(tones), [ dsp.rand(0.1, 0.7) for i in range(dsp.randint(5, 30)) ]) 
        layers += [ dsp.mix(tones) ]
        #layers += [ dsp.mix([layer, tonic]) ]
        #layers += [ layer ]

    out = dsp.mix(layers)

    return dsp.amp(out, volume)
Пример #29
0
 def make(length, freq):
     freq *= dsp.rand(1 - (bendfactor / 2.0), 1 + (bendfactor / 2.0))
     out = keys.chippy(length=int(length * dsp.rand(0.01, 0.4)),
                       freq=freq,
                       amp=0.7)
     out = dsp.env(out, 'phasor')
     out = dsp.pad(out, 0, length - dsp.flen(out))
     return out
Пример #30
0
    def clap(amp, length):
        # Two layers of noise: lowmid and high
        out = dsp.mix([ bln(int(length * 0.2), 600, 1200), bln(int(length * 0.2), 7000, 9000) ])
        
        out = dsp.env(out, 'phasor')
        out = dsp.pad(out, 0, length - dsp.flen(out))

        return out
Пример #31
0
    def snare(amp, length):
        # Two layers of noise: lowmid and high
        out = dsp.mix([ bln(int(length * 0.2), 700, 3200, 'impulse'), bln(int(length * 0.01), 7000, 9000) ])
        
        out = dsp.env(out, 'phasor')
        out = dsp.pad(out, 0, length - dsp.flen(out))

        return out
Пример #32
0
def play(voice_id):
    bpm = C('bpm')
    beat = dsp.bpm2frames(bpm)
    volume = P(voice_id, 'volume', default=1.0)

    crinkle = dsp.read('sounds/s/crinkle.wav').data
    glass1 = dsp.read('sounds/s/glass1.wav').data
    glass2 = dsp.read('sounds/s/glass2.wav').data
    toys = dsp.read('sounds/s/rolling.wav').data

    c = dsp.vsplit(crinkle, dsp.mstf(10), dsp.stf(3))
    c = dsp.randshuffle(c)
    c = c[:40]
    c = [dsp.pan(cc, dsp.rand()) for cc in c]
    c = [dsp.env(cc, 'sine') for cc in c]
    c = [dsp.transpose(cc, dsp.rand(0.25, 0.5)) for cc in c]

    t = dsp.vsplit(toys, dsp.mstf(10), dsp.stf(1))
    t = dsp.randshuffle(t)
    t = t[:40]
    t = [dsp.amp(tt, dsp.rand(0.1, 0.8)) for tt in t]
    t = [dsp.pan(tt, dsp.rand(0, 1)) for tt in t]
    t = [dsp.env(tt, 'sine') for tt in t]
    t = [dsp.transpose(tt, 0.5) for tt in t]

    g = dsp.vsplit(glass2, dsp.mstf(1), dsp.mstf(100))
    g = dsp.randshuffle(g)
    g = g[:40]
    g = [dsp.amp(gg, dsp.rand(0.35, 0.95)) for gg in g]
    g = [dsp.transpose(gg, dsp.rand(0.5, 1.75)) for gg in g]
    g = [gg * dsp.randint(1, 8) for gg in g]

    things = [c, t, g]

    out = [
        dsp.mix([
            dsp.randchoose(dsp.randchoose(things))
            for l in range(dsp.randint(2, 4))
        ]) for i in range(4)
    ]
    out = ''.join(out)

    dsp.log('voice %s length: %.2f' % (voice_id, dsp.fts(dsp.flen(out))))

    return out
Пример #33
0
def makeSnare(length, i):
    burst = dsp.bln(length, dsp.rand(400, 800), dsp.rand(8000, 10000))
    burst = dsp.env(burst, 'phasor')
    s = dsp.mix([snare, burst])
    s = dsp.transpose(s, dsp.rand(0.9, 1.1))

    s = dsp.fill(s, length, silence=True)

    return dsp.taper(s, 40)
Пример #34
0
def play(ctl):
    snd = dsp.read('/home/hecanjog/sounds/guitarpluck.wav').data

    #out = fx.rb(snd, interval=dsp.randint(0, 8) * 2, length=dsp.stf(0.25), formant=False)
    snd = dsp.transpose(snd, 0.968)
    out = dsp.stretch(snd, length=dsp.stf(dsp.rand(12, 15)), grain_size=120)
    out = dsp.env(out, 'hann')

    return out
Пример #35
0
def play(voice_id):
    tel = bot.getTel()

    degrees = [ dsp.randchoose([1, 2, 3, 4, 5, 6, 7, 8]) for f in range(dsp.randint(2, 6)) ]

    octave = dsp.randint(1, 4)

    freqs = tune.fromdegrees(degrees, root='c', octave=octave, ratios=tune.just)

    out = ''

    freq = dsp.randchoose(freqs)
    volume = dsp.rand(0.5, 0.8)
    length = dsp.randint(dsp.mstf(20), dsp.mstf(30))

    for p in range(dsp.randint(20, 100)):

        pulsewidth = dsp.rand(0.5, 1)

        mod = dsp.breakpoint([ dsp.rand(0, 1) for b in range(4) ], 512)
        window = dsp.breakpoint([0] + [ dsp.rand(0, 1) for b in range(10) ] + [0], 512)
        waveform = dsp.breakpoint([0] + [ dsp.rand(-1, 1) for b in range(20) ] + [0], 512)

        modRange = 0.01
        modFreq = dsp.rand(0.0001, 5)

        t = dsp.pulsar(freq, length, pulsewidth, waveform, window, mod, modRange, modFreq, volume)

        t = dsp.pad(t, 0, length * 3)

        t = dsp.env(t, 'sine')

        out += t

    out = dsp.env(out, 'sine')
    out = dsp.pan(out, dsp.rand(0, 1))

    dsp.log('')
    dsp.log('drone')
    dsp.log('%s length: %.2f' % (voice_id, dsp.fts(dsp.flen(out))))
    bot.show_telemetry(tel)

    return out
Пример #36
0
def fracture(snd):
    numpoints = dsp.randint(3, 20)
    poscurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0],
                              numpoints)
    poscurve = [p * (dsp.flen(snd) - dsp.mstf(210)) for p in poscurve]

    lencurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0],
                              numpoints)
    lencurve = [l * dsp.mstf(200) + dsp.mstf(10) for l in lencurve]

    pancurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0],
                              numpoints)

    prepadcurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0],
                                 numpoints)
    prepadcurve = [int(p * dsp.mstf(20)) for p in prepadcurve]

    postpadcurve = dsp.breakpoint([0] + [dsp.rand() for i in range(4)] + [0],
                                  numpoints)
    postpadcurve = [int(p * dsp.mstf(20)) for p in postpadcurve]

    speeds = [1.0, 2.0, 0.5, 0.75]

    grains = [dsp.cut(snd, poscurve[i], lencurve[i]) for i in range(numpoints)]
    grains = [dsp.pan(grains[i], pancurve[i]) for i in range(numpoints)]
    grains = [dsp.env(grain, 'gauss', True) for grain in grains]
    grains = [dsp.transpose(grain, dsp.randchoose(speeds)) for grain in grains]
    grains = [
        dsp.pad(grains[i], prepadcurve[i], postpadcurve[i])
        for i in range(numpoints)
    ]

    for i in range(numpoints):
        if dsp.randint(0, 3) == 0:
            grains[i] = slurp(grains[i])

    etypes = ['line', 'phasor', 'tri', 'sine', 'gauss']

    snd = dsp.env(''.join(grains), dsp.randchoose(etypes))
    snd = dsp.pad(snd, 0, dsp.mstf(dsp.rand(100, 400)))

    return snd
Пример #37
0
def brass(length=22050, freq=220, amp=0.5):
    pw = dsp.rand(0.25, 0.5)
    note = pulsar(length=length, freq=freq, pulsewidth=pw, amp=amp)
    noise = dsp.bln(length, dsp.rand(1000, 2000), dsp.rand(2000, 3000))
    noise = dsp.fill(noise, length)
    noise = fx.bend(noise, [ dsp.rand() for _ in range(dsp.randint(5, 10)) ], dsp.rand(0.01, 0.3))
    noise = dsp.amp(noise, dsp.rand(0.001, 0.002))
    noise = dsp.env(noise, 'tri')
    note = dsp.mix([ note, noise ])

    return note
Пример #38
0
                def bass(amp, length, oct=2):
                    if amp == 0:
                        return dsp.pad('', 0, length)

                    #bass_note = ['d', 'g', 'a', 'b'][ bassPlay % 4 ]
                    bass_note = ['e', 'a', 'b', 'c#'][ bassPlay % 4 ]

                    out = dsp.tone(length, wavetype='square', freq=tune.ntf(bass_note, oct), amp=amp*0.2)
                    out = dsp.env(out, 'random')

                    return out
Пример #39
0
def play(ctl):
    grains = dsp.randint(1, 100)

    o = ""
    for g in range(grains):
        length = dsp.stf(dsp.rand(0.001, 0.1))
        numpoints = dsp.randint(10, 30)
        points = [0] + [dsp.rand(-1, 1) for _ in range(numpoints)] + [0]

        out = dsp.bln(length, 330, 330, "tri")
        # out = dsp.am(out, dsp.tone(length, dsp.rand(10, 100)))
        out = dsp.env(out, "random")
        out = dsp.pan(out, dsp.rand())
        out = dsp.amp(out, dsp.rand(0.1, 0.9))

        o += out

    out = dsp.env(o, "random")
    out = dsp.pad(out, 0, dsp.stf(dsp.rand(0.1, 1)))

    return out
Пример #40
0
                def bass(amp, length, oct=2):
                    if amp == 0:
                        return dsp.pad('', 0, length)

                    #bass_note = ['d', 'g', 'a', 'b'][ bassPlay % 4 ]
                    bass_note = ['e', 'a', 'b', 'c#'][bassPlay % 4]

                    out = dsp.tone(length,
                                   wavetype='square',
                                   freq=tune.ntf(bass_note, oct),
                                   amp=amp * 0.2)
                    out = dsp.env(out, 'random')

                    return out
Пример #41
0
    def clap1(beat):
        c = dsp.read('sounds/mikeclap.wav').data
        c = dsp.transpose(c, dsp.rand(1, 2.5))
        c = dsp.fill(c, dsp.mstf(dsp.rand(10, 100)))
        c = dsp.env(c, 'phasor')
        c = dsp.amp(c, dsp.rand(1, 3))
        c = dsp.pad(c, 0, beat - dsp.flen(c))

        blen = beat / dsp.randchoose([1, 2])
        c = dsp.pad(c, blen, 0)

        c *= 4

        return c
Пример #42
0
def snare(amp, length):
    if amp == 0:
        return dsp.pad('', 0, length)

    # Two layers of noise: lowmid and high
    out = dsp.mix([
        bln(int(length * 0.2), 700, 3200, 'impulse'),
        bln(int(length * 0.01), 7000, 9000)
    ])

    out = dsp.env(out, 'phasor')
    out = dsp.pad(out, 0, length - dsp.flen(out))

    return out
Пример #43
0
def clap(amp, length):
    if amp == 0:
        return dsp.pad('', 0, length)

    # Two layers of noise: lowmid and high
    out = dsp.mix([
        bln(int(length * 0.2), 600, 1200),
        bln(int(length * 0.2), 7000, 9000)
    ])

    out = dsp.env(out, 'phasor')
    out = dsp.pad(out, 0, length - dsp.flen(out))

    return out
Пример #44
0
        def makeArps(seg, oct=3, reps=4):
            arp_degrees = [1, 2, 3, 5, 8, 9, 10]
            if dsp.randint(0, 1) == 0:
                arp_degrees.reverse()

            arp_degrees = dsp.rotate(arp_degrees, vary=True)
            arp_notes = tune.fromdegrees(arp_degrees[:reps], oct, 'e')

            arps = ''

            arp_count = 0
            for arp_length in seg:
                arp_length /= 2
                arp_pair = arp_notes[arp_count %
                                     len(arp_notes)], arp_notes[(arp_count + 1)
                                                                %
                                                                len(arp_notes)]

                arp_one = dsp.tone(arp_length,
                                   wavetype='tri',
                                   freq=arp_pair[0],
                                   amp=0.075)
                arp_one = dsp.env(arp_one, 'random')

                arp_two = dsp.tone(arp_length,
                                   wavetype='tri',
                                   freq=arp_pair[1],
                                   amp=0.08)
                arp_two = dsp.env(arp_two, 'random')

                arps += arp_one + arp_two
                arp_count += 2

            arps = dsp.env(arps, 'random')
            arps = dsp.pan(arps, dsp.rand())

            return arps
Пример #45
0
    def hat(beat):
        length = beat * 4
        nbeats = 16
        blen = length / nbeats

        out = ''

        for b in range(nbeats):
            h = dsp.transpose(tape1, 9)
            h = dsp.fill(h, dsp.mstf(dsp.rand(1, 20)))
            h = dsp.env(h, 'phasor')
            h = dsp.amp(h, dsp.rand(0, 0.8))
            h = dsp.pad(h, 0, blen - dsp.flen(h))

            out += h

        out *= 8

        return out
Пример #46
0
def play(voice_id):
    reload(keys)

    bpm = config('bpm')
    root = config('key')
    quality = getattr(tune, config('quality')) 
    ratios = getattr(tune, config('tune')) 

    scale = [1,5,8]

    if dsp.rand() > 0.5:
        scale = reversed(scale)

    freqs = tune.fromdegrees(scale, root=root, octave=dsp.randint(1, 3), ratios=ratios, scale=quality)

    freqs = dsp.rotate(freqs, dsp.randint(0, len(freqs)))

    out = ''

    length = int(dsp.bpm2frames(bpm) * dsp.randchoose([0.25, 0.5, 1]) * 0.5) 
    length = dsp.bpm2frames(bpm) * 4
    length = dsp.stf(dsp.rand(1, 8))
    for n in range(dsp.randint(1, 3)):
        amp = dsp.rand(0.3, 0.65)
        freq = dsp.randchoose(freqs)
        freq = freqs[n%len(freqs)]
        b = keys.chippy(length=length, freq=freq, amp=amp)

        b = dsp.split(b, 100)

        oenvs = dsp.breakpoint([0,0,0,0] + [ dsp.rand() for i in range(len(b) / 10) ], len(b))
        opans = dsp.breakpoint([dsp.rand(0.4, 0.6)] + [ dsp.rand() for i in range(len(b) / 100) ] + [0.5], len(b))
        b = [ dsp.amp(b[i], oenvs[i]) for i in range(len(b)) ]
        b = [ dsp.pan(b[i], opans[i]) for i in range(len(b)) ]

        b = ''.join(b)
        #b = dsp.env(b, 'phasor')
        b = dsp.env(b, 'sine')

        out += b

    return out
Пример #47
0
def play(voice_id):
    bpm = config('bpm')

    root = config('key')
    quality = getattr(tune, config('quality'))
    ratios = getattr(tune, config('tune'))

    beat = dsp.bpm2frames(bpm)

    length = dsp.randint(dsp.stf(1), dsp.stf(3))

    wav = dsp.breakpoint([0] + [dsp.rand(-1, 1) for w in range(10)] + [0], 512)
    win = dsp.wavetable('sine', 512)
    mod = dsp.wavetable('vary', 512)

    root = dsp.randchoose(tune.fromdegrees([1, 3, 5, 8], octave=0, root='a'))

    pw = dsp.rand(0.1, 1)

    amp = dsp.rand(0.5, 1.2)

    mFreq = 0.01 / dsp.fts(length)

    out = dsp.pulsar(root, length, pw, wav, win, mod, 0.05, mFreq, amp)

    #    out = dsp.env(out, 'vary')

    out = dsp.vsplit(out, dsp.mstf(1), dsp.mstf(500))
    out = dsp.randshuffle(out)
    out = [dsp.pad(o, 0, dsp.randint(0, 4410)) for o in out]
    out = [dsp.pan(o, dsp.rand()) for o in out]
    out = [dsp.alias(o) for o in out]
    out = [o * dsp.randint(1, 30) for o in out]
    out = [dsp.env(o, 'random') for o in out]
    out = [dsp.amp(o, dsp.rand(0.9, 1.5)) for o in out]

    out = ''.join(out)

    return out
Пример #48
0
def kick(amp, length):
    if amp == 0:
        return dsp.pad('', 0, length)

    fhigh = 160.0
    flow = 60.0
    fdelta = fhigh - flow

    target = length
    pos = 0
    fpos = fhigh

    out = ''
    while pos < target:
        # Add single cycle
        # Decrease pitch by amount relative to cycle len
        cycle = dsp.cycle(fpos)
        #cycle = ''.join([ str(v) for v in dsp.curve(0, dsp.htf(fpos), math.pi * 2) ])
        pos += dsp.flen(cycle)
        #fpos = fpos - (fhigh * (length / dsp.htf(fpos)))
        fpos = fpos - 30.0
        out += cycle

    return dsp.env(out, 'phasor')
Пример #49
0
def play(ctl):
    midi = ctl.get('midi')
    midi.setOffset(111)
    pw = midi.get(1, low=0.01, high=1)

    scale = [1, 2, 3, 6, 9]
    scale = tune.fromdegrees(scale, octave=midi.geti(4, low=0, high=4))

    freq = dsp.randchoose(scale)

    length = dsp.stf(midi.get(2, low=0.1, high=8) * dsp.rand(0.5, 1.5))
    wf = dsp.wavetable('sine2pi')
    win = dsp.wavetable('sine')
    mod = [dsp.rand(0, 1) for m in range(1000)]
    modr = midi.get(5, low=0, high=0.3)
    modf = midi.get(6, low=0.001, high=10)
    amp = midi.get(3, low=0, high=1)

    out = dsp.pulsar(freq, length, pw, wf, win, mod, modr, modf, amp)

    out = dsp.env(out, dsp.randchoose(['sine', 'tri']))
    out = dsp.pan(out, dsp.rand())

    return out
Пример #50
0
from pippi import dsp

freqs = [55, 220, 440, 770]
length = dsp.stf(90)

layers = []

for freq in freqs:
    amp = dsp.rand(0.05, 0.1)

    wf1 = dsp.breakpoint([ dsp.rand(-1, 1) for p in range(7) ], 512)
    wf2 = dsp.breakpoint([ dsp.rand(-1, 1) for p in range(4) ], 512)

    layer = dsp.subtract(dsp.ctone(freq * 0.999, length, wf1, amp), dsp.ctone(freq, length, wf2, amp))
    layer = dsp.pan(layer, dsp.rand())
    layer = dsp.env(layer, 'random')

    layers += [ layer ]

out = dsp.mix(layers)

dsp.write(out, 'retabler2')
Пример #51
0
def play(ctl):
    param = ctl.get('param')
    lpd = ctl.get('midi').get('lpd')

    pc = ctl.get('midi').get('pc')
    #pc.setOffset(111)

    gamut = {
        'high': [
            (10000, 15000),
            (5000, 15000),
            (5000, 10000),
        ],

        'mid': [
            (1000, 5000),
            (1000, 2000),
        ],

        'pitch': [
            tuple([ dsp.rand(500, 2000) for p in range(2) ]),
            tuple([ dsp.rand(100, 1000) for p in range(2) ]),
            tuple([ dsp.rand(1000, 5000) for p in range(2) ]),
        ],

        'low': [
            (20, 5000),
            (30, 10000),
            (40, 10000),
        ]
    }

    area = param.get('wash-area', default='high')
    area = dsp.randchoose(['high', 'mid', 'pitch', 'low'])
    area = 'pitch'

    dsp.log(area)

    freqs = dsp.randchoose(gamut[area])

    freqscale = pc.get(16, low=0.125, high=2, default=1)
    #freqscale = dsp.rand(0.125, 2)

    low = freqs[0] * freqscale
    high = freqs[1] * freqscale

    wform = dsp.randchoose(['sine2pi', 'tri', 'vary', 'square'])

    timescale = pc.get(17, low=1, high=4, default=1)
    #timescale = dsp.rand(1, 4)
    lengthscale = pc.get(18, low=0.125, high=2.5)
    #lengthscale = dsp.rand(0.125, 2.5)

    amp = pc.get(0, low=0, high=0.5, default=0.5)
    #amp = dsp.rand(0, 0.5)

    if area == 'high':
        low = dsp.rand(low * 0.9, low)
        high = dsp.rand(high, high * 1.1)

        length = dsp.stf(dsp.rand(0.01, 0.3) * lengthscale)
        out = dsp.bln(length, low, high, wform)
        out = dsp.env(out, 'phasor')

        if dsp.rand() > 10.5:
            beep = dsp.tone(dsp.flen(out), high * 2, amp=dsp.rand(0.5, 1))
            out = dsp.mix([out, beep])

        out = dsp.pad(out, 0, dsp.mstf(dsp.rand(1, 400) * timescale))
        out = out * dsp.randint(1, 3)
        out = dsp.drift(out, dsp.rand(0, 1))

    elif area == 'mid':
        low = dsp.rand(low * 0.9, low)
        high = dsp.rand(high, high * 1.1)

        length = dsp.stf(dsp.rand(0.01, 0.5) * lengthscale)
        out = dsp.bln(length, low, high, wform)
        out = dsp.env(out, 'random')

        if timescale > 1:
            out = dsp.pad(out, 0, dsp.mstf(500 * timescale * dsp.rand(0.5, 1.5)))


    elif area == 'pitch':
        low = dsp.rand(low * 0.9, low)
        high = dsp.rand(high, high * 1.1)

        length = dsp.stf(dsp.rand(0.01, 0.5) * lengthscale)
        out = dsp.bln(length, low, high, wform)
        out = dsp.env(out, 'random')

        if timescale > 1:
            out = dsp.pad(out, 0, dsp.mstf(500 * timescale * dsp.rand(0.5, 1.5)))


    elif area == 'low':
        low = dsp.rand(low * 0.9, low)
        high = dsp.rand(high, high * 1.1)

        length = dsp.stf(dsp.rand(0.2, 2) * lengthscale)
        out = dsp.bln(length, low, high, wform)
        out = dsp.env(out, 'random')
        out = dsp.mix([out, dsp.tone(length, low)])

        if dsp.rand() > 0.5:
            beep = dsp.tone(dsp.flen(out), high, amp=dsp.rand(0.015, 0.1), wavetype=dsp.randchoose(['hann', 'impulse', 'square', 'vary', 'sine']))
            out = dsp.mix([out, beep])


        if timescale > 1:
            out = dsp.pad(out, 0, dsp.mstf(500 * timescale * dsp.rand(0.5, 1.5)))


    if dsp.rand() > pc.get(19, low=0, high=1, default=0.75):
        plength = length * dsp.randint(2, 6)
        freq = tune.ntf(param.get('key', default='c'), octave=dsp.randint(0, 4))
        out = dsp.mix([ dsp.pine(out, plength, freq), dsp.pine(out, plength, freq * 1.25) ])
        out = dsp.fill(out, length)

    out = dsp.pan(out, dsp.rand())
    out = dsp.amp(out, amp)

    return out
Пример #52
0
        minlen = 40
        lenrange = dsp.rand(300, 500)
        lengths = dsp.wavetable('hann', numgrains * 2)[:numgrains]
        lengths = [ dsp.mstf(l * lenrange + minlen) for l in lengths ]
        pans = dsp.breakpoint([ dsp.rand() for p in range(numgrains / 3)], numgrains)

        layers += [ (lengths, pans) ]

    sections += [ layers ]

out = ''
for section in sections:
    layers = []
    for layer in section:
        startpoint = dsp.randint(0, dsp.flen(g) - max(layer[0]))
        
        grains = ''
        for l, p in zip(layer[0], layer[1]):
            grain = dsp.cut(g, startpoint, l)
            grain = dsp.env(grain, 'phasor')
            grain = dsp.taper(grain, dsp.mstf(10))
            grain = dsp.pan(grain, p)
            
            grains += grain

        layers += [ dsp.env(grains, 'phasor') ]

    out += dsp.mix(layers)

dsp.write(out, 'spiderfall')
Пример #53
0
def play(voice_id):
    bpm = config('bpm')
    beat = dsp.bpm2frames(bpm)
    dsl = P(voice_id, 'drum', '["c","k","h"]')
    dsp.log(dsl)
    dsl = json.loads(dsl)

    def hat(beat):
        length = beat * 4
        nbeats = 16
        blen = length / nbeats

        out = ''

        for b in range(nbeats):
            h = dsp.transpose(tape1, 9)
            h = dsp.fill(h, dsp.mstf(dsp.rand(1, 20)))
            h = dsp.env(h, 'phasor')
            h = dsp.amp(h, dsp.rand(0, 0.8))
            h = dsp.pad(h, 0, blen - dsp.flen(h))

            out += h

        out *= 8

        return out

    def kick(beat):
        out = drums.sinekick(length=beat, amp=dsp.rand(0.8, 1))
        out = dsp.pad(out, 0, beat * dsp.randint(1, 2))
        out *= 2
        return out

    def clap1(beat):
        c = dsp.read('sounds/mikeclap.wav').data
        c = dsp.transpose(c, dsp.rand(1, 2.5))
        c = dsp.fill(c, dsp.mstf(dsp.rand(10, 100)))
        c = dsp.env(c, 'phasor')
        c = dsp.amp(c, dsp.rand(1, 3))
        c = dsp.pad(c, 0, beat - dsp.flen(c))

        blen = beat / dsp.randchoose([1, 2])
        c = dsp.pad(c, blen, 0)

        c *= 4

        return c

    def clap2(beat):
        nlens = [
            beat * 2,
            beat,
            beat / 2,
        ]

        # length of pattern (in beats)
        nbeats = dsp.randint(10, 15)

        # beat lengths (from a set of bpm-derived note lengths defined in the nlens list)
        blens = [dsp.randchoose(nlens) for b in range(nbeats)]

        out = ''

        # synthesize the tones
        for i in range(nbeats):
            beat = dsp.transpose(dsp.randchoose([c1, c2]),
                                 dsp.rand(0.25, 40.0))
            beat = dsp.pad(beat, 0, blens[i] - dsp.flen(beat))
            beat = dsp.amp(beat, dsp.rand(1, 4))

            # add it to the output
            out += beat

        return out

    all = []

    if 'c' in dsl:
        clapper = dsp.randchoose([clap1, clap2])
        all += [clapper(beat)]

    if 'k' in dsl:
        all += [kick(beat)]

    if 'h' in dsl:
        all += [hat(beat)]

    out = dsp.mix(all)

    #    out = dsp.vsplit(out, dsp.mstf(dsp.rand(8, 140)), dsp.mstf(500))
    #    out = dsp.randshuffle(out)
    #    out = ''.join(out)

    out = dsp.vsplit(out, 10, 1000)
    out = [dsp.amp(o, dsp.rand(0, 4)) for o in out]
    out = [dsp.env(o, 'random') for o in out]
    out = [dsp.transpose(o, dsp.rand(0.25, 1)) for o in out]
    out = dsp.randshuffle(out)
    out = ''.join(out)

    out = dsp.pine(out, int(dsp.flen(out) * dsp.rand(1.5, 4)),
                   dsp.rand(10, 2000), dsp.randint(0, 2), dsp.rand(1, 3),
                   dsp.randint(0, 2), dsp.rand(1, 3))
    out = dsp.amp(out, 0.65)

    glass = dsp.read('sounds/s/glass2.wav').data

    glass = dsp.vsplit(glass, dsp.mstf(1), dsp.mstf(100))
    glass = dsp.randshuffle(glass)
    #    glass = [ dsp.pad(g, 0, dsp.randint(10, 1000)) for g in glass ]
    #    glass = [ dsp.transpose(g, dsp.rand(0.5, 1.5)) * dsp.randint(1, 3) for g in glass ]
    glass = ''.join(glass)

    glass = dsp.fill(glass, dsp.flen(out))

    out = dsp.mix([out, glass])

    return out
Пример #54
0
 def makeHat(length, i, amp):
     h = dsp.fill(ohsnd, length)
     h = dsp.env(h, 'phasor')
     return h
Пример #55
0
#!/usr/bin/env python
"""
pip install pippi
"""
import sys
from pippi import dsp
out = dsp.tone(dsp.stf(5), freq=220, amp=0.2)
out = dsp.env(out, 'hann')
#dsp.write(out, 'hello')
#'hello.wav'
dsp.write(sys.stdout)
Пример #56
0
        amps = dsp.breakpoint(
            [dsp.rand(0.1, 0.3) for _ in range(npulses / 50)], npulses)
        pans = dsp.breakpoint([dsp.rand(0, 1) for _ in range(npulses / 10)],
                              npulses)
        lengths = [
            dsp.mstf(l) for l in dsp.breakpoint(
                [dsp.rand(1, 30) for _ in range(npulses / 10)], npulses)
        ]

        for high, low, amp, pan, length in zip(highs, lows, amps, pans,
                                               lengths):
            p = dsp.bln(length,
                        low,
                        high,
                        wform=dsp.randchoose(['hann', 'sine2pi', 'tri']))
            p = dsp.env(p, 'hann')
            p = dsp.taper(p, 20)
            p = dsp.amp(p, amp)
            p = dsp.pan(p, pan)

            layer += p

        layers += [layer]

    freqs = tune.fromdegrees([dsp.randint(1, 9) for _ in range(nlayers)],
                             octave=1,
                             root='a')

    for i, freq in enumerate(freqs):
        layers[i] = dsp.pine(layer, dsp.flen(layer) * 10, freq)
Пример #57
0
for _ in range(numlayers):
    layer = ''

    for _ in range(numevents):
        slength = dsp.rand(0.1, 4)
        length = dsp.stf(slength)
        freq = (1.0 / slength) * dsp.rand(0.5, 10)
        amp = dsp.rand(0.1, 0.5)

        log = dsp.breakpoint(
            data.Logistic(dsp.rand(3.88, 3.99), 0.5, length / 10).data, length)
        mult = dsp.breakpoint(
            [0] + [dsp.rand(-1, 1) for _ in range(dsp.randint(50, 100))] + [0],
            length)

        wf = [m * l for m, l in zip(mult, log)]

        o = dsp.ctone(freq, length, wf, amp)
        o = dsp.env(o, 'random')
        o = dsp.pan(o, dsp.rand())
        o = dsp.taper(o, dsp.mstf(20))

        layer += o

    layers += [layer]

out = dsp.mix(layers)

dsp.write(out, 'lipsys')
Пример #58
0
def play(ctl):
    param = ctl.get('param')
    lpd = ctl.get('midi').get('lpd')

    scale = [ dsp.randchoose([1, 3, 5, 6, 8]) for s in range(dsp.randint(2, 4)) ]
    #scale = [ dsp.randchoose([1, 2, 4, 6, 8]) for s in range(dsp.randint(2, 4)) ]

    freqs = tune.fromdegrees(scale, root='a', octave=dsp.randint(2,3), scale=tune.minor)
    freq = dsp.randchoose(freqs)

    pw = lpd.get(2, low=0.01, high=1, default=1)
    pw = dsp.rand(0.01, 1)
    modr = lpd.get(6, low=0.001, high=0.1)
    modr = dsp.rand(0.001, 0.05)
    #modr = dsp.rand(0.1, 10.5)
    #modr = dsp.rand(0.001, 0.01)
    modr = dsp.rand(0, modr)
    modf = dsp.rand(0.01, 0.05)
    amp = lpd.get(1, low=0, high=2, default=0)
    #amp = dsp.rand(0.1, 0.5)
    #amp = 0

    length = dsp.stf(lpd.get(5, low=0.5, high=14, default=1) * dsp.rand(0.75, 2))
    length = dsp.stf(dsp.rand(5.5, 24) * dsp.rand(0.75, 2))
    #length = dsp.stf(dsp.rand(0.5, 0.75) * dsp.rand(0.75, 2))

    wf = dsp.breakpoint([0] + [ dsp.rand(-1, 1) for w in range(10) ] + [0], 512)
    #wf = dsp.wavetable('sine2pi', 512)
    #wf = dsp.wavetable('sine2pi', 512)
    #win = dsp.wavetable('sine', 512)
    win = dsp.breakpoint([0] + [ dsp.rand(0, 1) for w in range(5) ] + [0], 512)
    mod = dsp.breakpoint([0] + [ dsp.rand(0, 1) for m in range(5) ] + [0], 512)

    layers = []

    harmonics = [1, 2, 3, 4]

    for harmonic in harmonics:
        f = freq * harmonic
        if harmonic > 4:
            a = dsp.rand(0.05, 0.1)
        else:
            a = amp * dsp.rand(0.1, 0.5)

        layer = dsp.pulsar(f, length, pw, wf, win, mod, modr, modf, a * 2)
        layer = dsp.env(layer, dsp.randchoose(['sine', 'tri', 'line', 'phasor']))
        layer = dsp.taper(layer)
        layer = dsp.pan(layer, dsp.rand())
        layer = dsp.mix([ dsp.drift(layer, dsp.rand(0.01, 0.03)), layer ])

        if dsp.rand() > 0.5:
            layer = dsp.vsplit(layer, dsp.mstf(50), dsp.mstf(500))
            bit = dsp.randchoose(layer)
            bit = bit * dsp.randint(1, 3)
            bit = dsp.transpose(bit, dsp.randchoose([1, 2, 4, 8]))
            layer = ''.join(layer)
            layer = dsp.insert_into(layer, bit, dsp.randint(0, dsp.flen(layer) - dsp.flen(bit)))

        layers += [ layer ]

    out = dsp.mix(layers)
    out = dsp.env(out, 'sine')
    out = dsp.env(out, 'hann')
    #out = dsp.env(out, 'phasor')
    out = dsp.taper(out)

    return out