def __init__(self, settings=None, verbose=False, monitor=False):
"""
Class constructor
@param settings: path to the main configuration file
@param verbose: Print out SWAP frames or not
@param monitor: Print out network events or not
"""
try:
# Superclass call
SwapInterface.__init__(self, settings, verbose)
except:
raise
# Print SWAP activity
self._printSWAP = monitor
# Mote address in SYNC mode
self._addrInSyncMode = None
# Read plugin config
self._readPluginConfig()
# Declare HouseAgent callbacks
callbacks = {'poweron': self.cb_poweron,
'poweroff': self.cb_poweroff,
'custom': self.cb_custom,
'thermostat_setpoint': self.cb_thermostat}
# Start plugin
self._pluginapi = PluginAPI(guid=self.pluginId, plugintype="SWAP", broker_host=self.broker_host, broker_port=self.broker_port, **callbacks)
self._pluginapi.ready()
reactor.run()
def __init__(self):
'''
Load initial CM11 configuration from hacm11.conf
'''
from utils.generic import get_configurationpath
self.config_path = get_configurationpath()
config = ConfigParser.RawConfigParser()
config.read(os.path.join(self.config_path, 'hacm11.conf'))
print "DEBUG: get_configurationpath: ", self.config_path
print "DEBUG: os.getcwd: ", os.getcwd( )
print "DEBUG: sys.path:", sys.path
# Get serial port information
self.port = config.get("serial", "port")
# Get broker information (RabbitMQ)
self.broker_host = config.get("broker", "host")
self.broker_port = config.getint("broker", "port")
self.broker_user = config.get("broker", "username")
self.broker_pass = config.get("broker", "password")
self.broker_vhost = config.get("broker", "vhost")
self.logging = config.getboolean('general', 'logging')
self.id = config.get('general', 'id')
self.pluginapi = PluginAPI(plugin_id=self.id, plugin_type='x10', logging=self.logging,
broker_ip=self.broker_host, broker_port=self.broker_port,
username=self.broker_user, password=self.broker_pass, vhost=self.broker_vhost)
self.pluginapi.register_poweron(self)
self.pluginapi.register_poweroff(self)
self.pluginapi.register_dim(self)
self.pluginapi.register_custom(self)
self.protocol = CM11Protocol(self)
self.reactor = None
# Initialize in-memory device list from xml file
xml_file = os.path.join(self.config_path, 'x10.xml')
try:
xmldoc = ET.parse(xml_file)
devices = xmldoc.findall('device')
for device in devices:
newdevice = Device(device.get('hcdc'))
newdevice.standarddim = (device.findtext('standarddim', 'False').lower() == "true")
newdevice.presetdim = (device.findtext('presetdim', 'False').lower() == "true")
newdevice.allunitsoff = (device.findtext('allunitsoff', 'False').lower() == "true")
newdevice.alllightsoff = (device.findtext('alllightsoff', 'False').lower() == "true")
newdevice.alllightson = (device.findtext('alllightson', 'False').lower() == "true")
newdevice.statusrequest = (device.findtext('statusrequest','False').lower() == "true")
newdevice.reportstatus = (device.findtext('reportstatus','False').lower() == "true")
listDevices.append(newdevice)
except:
log.msg("Error opening or reading '%s' (%s)" % (xml_file, sys.exc_info()[1]))
def __init__(self, settings=None, verbose=False, monitor=False):
"""
Class constructor
@param settings: path to the main configuration file
@param verbose: Print out SWAP frames or not
@param monitor: Print out network events or not
"""
try:
# Superclass call
SwapInterface.__init__(self, settings, verbose)
except:
raise
# Print SWAP activity
self._printSWAP = monitor
# Mote address in SYNC mode
self._addrInSyncMode = None
# Read plugin config
self._readPluginConfig()
# Declare HouseAgent callbacks
callbacks = {
'poweron': self.cb_poweron,
'poweroff': self.cb_poweroff,
'custom': self.cb_custom,
'thermostat_setpoint': self.cb_thermostat
}
# Start plugin
self._pluginapi = PluginAPI(guid=self.pluginId,
plugintype="SWAP",
broker_host=self.broker_host,
broker_port=self.broker_port,
**callbacks)
self._pluginapi.ready()
reactor.run()
class CM11Wrapper():
def __init__(self):
'''
Load initial CM11 configuration from hacm11.conf
'''
from utils.generic import get_configurationpath
self.config_path = get_configurationpath()
config = ConfigParser.RawConfigParser()
config.read(os.path.join(self.config_path, 'hacm11.conf'))
print "DEBUG: get_configurationpath: ", self.config_path
print "DEBUG: os.getcwd: ", os.getcwd( )
print "DEBUG: sys.path:", sys.path
# Get serial port information
self.port = config.get("serial", "port")
# Get broker information (RabbitMQ)
self.broker_host = config.get("broker", "host")
self.broker_port = config.getint("broker", "port")
self.broker_user = config.get("broker", "username")
self.broker_pass = config.get("broker", "password")
self.broker_vhost = config.get("broker", "vhost")
self.logging = config.getboolean('general', 'logging')
self.id = config.get('general', 'id')
self.pluginapi = PluginAPI(plugin_id=self.id, plugin_type='x10', logging=self.logging,
broker_ip=self.broker_host, broker_port=self.broker_port,
username=self.broker_user, password=self.broker_pass, vhost=self.broker_vhost)
self.pluginapi.register_poweron(self)
self.pluginapi.register_poweroff(self)
self.pluginapi.register_dim(self)
self.pluginapi.register_custom(self)
self.protocol = CM11Protocol(self)
self.reactor = None
# Initialize in-memory device list from xml file
xml_file = os.path.join(self.config_path, 'x10.xml')
try:
xmldoc = ET.parse(xml_file)
devices = xmldoc.findall('device')
for device in devices:
newdevice = Device(device.get('hcdc'))
newdevice.standarddim = (device.findtext('standarddim', 'False').lower() == "true")
newdevice.presetdim = (device.findtext('presetdim', 'False').lower() == "true")
newdevice.allunitsoff = (device.findtext('allunitsoff', 'False').lower() == "true")
newdevice.alllightsoff = (device.findtext('alllightsoff', 'False').lower() == "true")
newdevice.alllightson = (device.findtext('alllightson', 'False').lower() == "true")
newdevice.statusrequest = (device.findtext('statusrequest','False').lower() == "true")
newdevice.reportstatus = (device.findtext('reportstatus','False').lower() == "true")
listDevices.append(newdevice)
except:
log.msg("Error opening or reading '%s' (%s)" % (xml_file, sys.exc_info()[1]))
#device = next((device for device in listDevices if device.hcdc == 'M5'), None)
#index = next((i for i in xrange(len(listDevices)) if listDevices[i].hcdc == 'M5'), None)
#if index is not None:
# print listDevices[index].hcdc
# device = listDevices.pop(index)
# print "HCDC: ", device.hcdc
# print "allunitsoff: ", device.allunitsoff
def start(self):
'''
Function that starts the CM11 plug-in. It handles the creation
of the plugin connection and connects to the specified serial port.
'''
#FIXME: Error when serial port does not exist or cannot be opened
try:
myserial = SerialPort (self.protocol, self.port, reactor)
myserial.setBaudRate(4800)
self.reactor = reactor
reactor.run(installSignalHandlers=0)
return(True)
except:
log.msg("Error opening serial port %s (%s)" % (self.port, sys.exc_info()[1]))
return(False)
def on_poweron(self, hcdc):
log.msg("Turn %s on" % hcdc)
self.protocol.poweron(hcdc)
return {'processed': True}
def on_poweroff(self, hcdc):
log.msg("Turn %s off" % hcdc)
self.protocol.poweroff(hcdc)
return {'processed': True}
def on_dim(self, hcdc, level):
log.msg("Dim %s to %s%%" % (hcdc, level))
self.protocol.dim(hcdc, level)
return {'processed': True}
def on_custom(self, command, parameters):
"""
Handles several custom actions used througout the plugin.
"""
log.msg("on_custom event received")
if command == 'add_characteristics':
'''
This command sets the characteristics of a new X10 device and starts monitoring it.
'''
newdevice = Device(parameters["hcdc"])
for value in parameters["values"]:
if value == "alllightsoff":
newdevice.alllightsoff = True
elif value == "alllightson":
newdevice.alllightson = True
elif value == "allunitsoff":
newdevice.allunitsoff = True
elif value == "presetdim":
newdevice.presetdim = True
elif value == "standarddim":
newdevice.standarddim = True
elif value == "statusrequest":
newdevice.statusrequest = True
elif value == "reportstatus":
newdevice.reportstatus = True
else:
log.msg("Unknown characteristic (%s)" % value)
listDevices.append(newdevice)
log.msg("Monitoring new device (%s)" % newdevice.hcdc)
self.writeXML()
elif command == 'set_characteristics':
'''
This command sets the characteristics of the specified X10 device.
'''
item = next((i for i in xrange(len(listDevices)) if listDevices[i].hcdc == parameters["hcdc"]), None)
if item is not None:
listDevices[item].alllightsoff = False
listDevices[item].alllightson = False
listDevices[item].allunitsoff = False
listDevices[item].presetdim = False
listDevices[item].standarddim = False
listDevices[item].statusrequest = False
listDevices[item].reportstatus = False
for value in parameters["values"]:
if value == "alllightsoff":
listDevices[item].alllightsoff = True
if value == "alllightson":
listDevices[item].alllightson = True
if value == "allunitsoff":
listDevices[item].allunitsoff = True
if value == "presetdim":
listDevices[item].presetdim = True
if value == "standarddim":
listDevices[item].standarddim = True
if value == "statusrequest":
listDevices[item].statusrequest = True
if value == "reportstatus":
listDevices[item].reportstatus = True
else:
log.msg("Unknown device specified (%s)" % parameters["hcdc"])
log.msg("Characteristics of device (%s) are changed" % parameters["hcdc"])
self.writeXML()
elif command == 'get_characteristics':
'''
This command retrieves the characteristics of the specified X10 device.
'''
item = next((i for i in xrange(len(listDevices)) if listDevices[i].hcdc == parameters["hcdc"]), None)
if item is None:
log.msg("Error: Retrieved device characteristics of a device not being monitored.")
else:
return({"alllightsoff": listDevices[item].alllightsoff,
"allunitsoff": listDevices[item].allunitsoff,
"alllightson": listDevices[item].alllightson,
"standarddim": listDevices[item].standarddim,
"presetdim": listDevices[item].presetdim,
"statusrequest": listDevices[item].statusrequest,
"reportstatus": listDevices[item].reportstatus})
elif command == 'del_characteristics':
'''
This command stops monitoring of the specified X10 device.
'''
item = next((i for i in xrange(len(listDevices)) if listDevices[i].hcdc == parameters["hcdc"]), None)
if item is not None:
log.msg("Stopped monitoring X10 device (%s)" % parameters["hcdc"])
del listDevices[item]
# Write XML file containing details of monitored devices
self.writeXML()
else:
log.msg("Unknown device specified (%s)" % parameters["hcdc"])
return(None)
else:
log.msg("unknown command (%s)" % command)
return {'processed': True}
def writeXML(self):
# Write device characteristics to a file
xml_file = os.path.join(self.config_path, 'x10.xml')
file = open(xml_file, 'w')
root = ET.Element("devices")
for device in listDevices:
dev = ET.SubElement(root, "device", {"hcdc": device.hcdc})
char = ET.SubElement(dev, "standarddim")
char.text = str(device.standarddim)
char = ET.SubElement(dev, "presetdim")
char.text = str(device.presetdim)
char = ET.SubElement(dev, "allunitsoff")
char.text = str(device.allunitsoff)
char = ET.SubElement(dev, "alllightsoff")
char.text = str(device.alllightsoff)
char = ET.SubElement(dev, "alllightson")
char.text = str(device.alllightson)
char = ET.SubElement(dev, "statusrequest")
char.text = str(device.statusrequest)
char = ET.SubElement(dev, "reportstatus")
char.text = str(device.reportstatus)
# Function to indent XML output
# Source: http://infix.se/2007/02/06/gentlemen-indent-your-xml
def indent(elem, level=0):
i = "\n" + level*" "
if len(elem):
if not elem.text or not elem.text.strip():
elem.text = i + " "
for e in elem:
indent(e, level+1)
if not e.tail or not e.tail.strip():
e.tail = i + " "
if not e.tail or not e.tail.strip():
e.tail = i
else:
if level and (not elem.tail or not elem.tail.strip()):
elem.tail = i
tree = ET.ElementTree(root)
indent(tree.getroot())
tree.write(xml_file)
file.close()
class SwapManager(SwapInterface):
"""
SWAP Management Class
"""
def newMoteDetected(self, mote):
"""
New mote detected by SWAP server
@param mote: Mote detected
"""
if self._printSWAP == True:
print "New mote with address " + str(mote.address) + " : " + mote.definition.product + \
" (by " + mote.definition.manufacturer + ")"
def newEndpointDetected(self, endpoint):
"""
New endpoint detected by SWAP server
@param endpoint: Endpoint detected
"""
if self._printSWAP == True:
print "New endpoint with Reg ID = " + str(
endpoint.getRegId()) + " : " + endpoint.name
# Set param units for this endpoint
values = self.cfgdevices.getValues(endpoint.getRegAddress())
if endpoint.name in values:
endpoint.display = True
if values[endpoint.name] != "":
endpoint.setUnit(values[endpoint.name])
def moteStateChanged(self, mote):
"""
Mote state changed
@param mote: Mote having changed
"""
if self._printSWAP == True:
print "Mote with address " + str(mote.address) + " switched to \"" + \
SwapState.toString(mote.state) + "\""
# SYNC mode entered?
if mote.state == SwapState.SYNC:
self._addrInSyncMode = mote.address
def moteAddressChanged(self, mote):
"""
Mote address changed
@param mote: Mote having changed
"""
if self._printSWAP == True:
print "Mote changed address to " + str(mote.address)
def registerValueChanged(self, register):
"""
Register value changed
@param register: register object having changed
"""
if self._printSWAP == True:
print "Register addr= " + str(register.getAddress(
)) + " id=" + str(
register.id) + " changed to " + register.value.toAsciiHex()
# Empty dictionary
values = {}
# For every endpoint contained in this register
for endp in register.lstItems:
strVal = endp.getValueInAscii()
if endp.valueChanged:
if self._printSWAP:
print endp.name + " in address " + str(
endp.getRegAddress()) + " changed to " + strVal
if endp.display == True:
values[endp.name] = strVal
if len(values) > 0:
if self._pluginapi is not None:
self._pluginapi.value_update(register.getAddress(), values)
def cb_poweron(self, address):
"""
This function is called when a poweron request has been received from the network.
@param address: Address of the mote to be powered-on
"""
addr = int(address)
d = defer.Deferred()
#self.manager.setNodeOn(self.home_id, node_id)
d.callback('done!')
return d
def cb_poweroff(self, address):
"""
This function is called when a poweroff request has been received from the network.
@param address: Address of the mote to be powered-off
"""
addr = int(address)
d = defer.Deferred()
#self.manager.setNodeOff(self.home_id, node_id)
d.callback('done!')
return d
def cb_thermostat(self, address, setpoint):
'''
This callback function handles setting of thermostat setpoints.
@param address: Address of the mote
@param setpoint: the setpoint to set (float)
'''
d = defer.Deferred()
"""
node = self.get_node(self.home_id, int(node_id))
if not isinstance(node, ZwaveNode):
d.callback('error1') # Specified node not available
else:
for val in node.values:
if val.value_data['commandClass'] == 'COMMAND_CLASS_THERMOSTAT_SETPOINT':
value_id = int(val.value_data['id'])
self.manager.setValue(value_id, float(setpoint))
d.callback('ok')
"""
return d
def cb_custom(self, action, parameters):
"""
Handles several custom actions used througout the plugin.
@param command: Custom command
@param parameters: Custom command parameters
@return Object requested
"""
if action == 'get_networkinfo':
motes = {}
for index, mote in enumerate(self.server.lstMotes):
moteInfo = {
"address":
mote.address,
"manufacturer":
mote.definition.manufacturer,
"product":
mote.definition.product,
"sleeping":
mote.definition.pwrdownmode,
"lastupdate":
datetime.datetime.fromtimestamp(
mote.timestamp).strftime("%d-%m-%Y %H:%M:%S")
}
motes[index] = moteInfo
d = defer.Deferred()
d.callback(motes)
return d
elif action == "get_motevalues":
values = {}
devaddress = int(parameters["mote"])
mote = self.server.getMote(address=devaddress)
i = 0
for reg in mote.lstregregs:
for endp in reg.lstItems:
valueinfo = {
"type":
endp.type + " " + SwapType.toString(endp.direction),
"name": endp.name,
"value": endp.getValueInAscii(),
"units": [],
"unit": endp.unit.name
}
if endp.lstunits is not None and len(endp.lstunits) > 0:
for unit in endp.lstunits:
valueinfo["units"].append(unit.name)
values[i] = valueinfo
i += 1
d = defer.Deferred()
d.callback(values)
return d
elif action == "track_values":
'''
With this command you can set certain SWAP values to be tracked, and send them to the master node.
'''
address = parameters['mote']
values = parameters['values']
self.cfgdevices.setValues(address, values)
# Save config file
self.cfgdevices.save()
# Set units
mote = self.getMote(address=address)
for name, unit in values.items():
if unit != "":
param = mote.getParameter(name)
if param is not None:
param.display = True
param.setUnit(unit)
# Update specified values right now
report_values = {}
i = 0
mote = self.getMote(address=address)
for reg in mote.lstregregs:
for endp in reg.lstItems:
if endp.name in values:
report_values[endp.name] = endp.getValueInAscii()
i += 1
self._pluginapi.value_update(address, report_values)
# Return something anyway, even though we return nothing.
d = defer.Deferred()
d.callback('')
return d
def _readPluginConfig(self):
"""
Read configuration parameters of the SWAP plugin
"""
config = ConfigParser.RawConfigParser()
config.read('plugin.conf')
self.broker_host = config.get('broker', 'host')
self.broker_port = config.getint('broker', 'port')
self.pluginId = config.get('general', 'id')
self.loglevel = config.get('general', 'loglevel')
# Read devices config file
self.cfgdevices = XmlDevices()
def __init__(self, settings=None, verbose=False, monitor=False):
"""
Class constructor
@param settings: path to the main configuration file
@param verbose: Print out SWAP frames or not
@param monitor: Print out network events or not
"""
try:
# Superclass call
SwapInterface.__init__(self, settings, verbose)
except:
raise
# Print SWAP activity
self._printSWAP = monitor
# Mote address in SYNC mode
self._addrInSyncMode = None
# Read plugin config
self._readPluginConfig()
# Declare HouseAgent callbacks
callbacks = {
'poweron': self.cb_poweron,
'poweroff': self.cb_poweroff,
'custom': self.cb_custom,
'thermostat_setpoint': self.cb_thermostat
}
# Start plugin
self._pluginapi = PluginAPI(guid=self.pluginId,
plugintype="SWAP",
broker_host=self.broker_host,
broker_port=self.broker_port,
**callbacks)
self._pluginapi.ready()
reactor.run()
class SwapManager(SwapInterface):
"""
SWAP Management Class
"""
def newMoteDetected(self, mote):
"""
New mote detected by SWAP server
@param mote: Mote detected
"""
if self._printSWAP == True:
print "New mote with address " + str(mote.address) + " : " + mote.definition.product + \
" (by " + mote.definition.manufacturer + ")"
def newEndpointDetected(self, endpoint):
"""
New endpoint detected by SWAP server
@param endpoint: Endpoint detected
"""
if self._printSWAP == True:
print "New endpoint with Reg ID = " + str(endpoint.getRegId()) + " : " + endpoint.name
# Set param units for this endpoint
values = self.cfgdevices.getValues(endpoint.getRegAddress())
if endpoint.name in values:
endpoint.display = True
if values[endpoint.name] != "":
endpoint.setUnit(values[endpoint.name])
def moteStateChanged(self, mote):
"""
Mote state changed
@param mote: Mote having changed
"""
if self._printSWAP == True:
print "Mote with address " + str(mote.address) + " switched to \"" + \
SwapState.toString(mote.state) + "\""
# SYNC mode entered?
if mote.state == SwapState.SYNC:
self._addrInSyncMode = mote.address
def moteAddressChanged(self, mote):
"""
Mote address changed
@param mote: Mote having changed
"""
if self._printSWAP == True:
print "Mote changed address to " + str(mote.address)
def registerValueChanged(self, register):
"""
Register value changed
@param register: register object having changed
"""
if self._printSWAP == True:
print "Register addr= " + str(register.getAddress()) + " id=" + str(register.id) + " changed to " + register.value.toAsciiHex()
# Empty dictionary
values = {}
# For every endpoint contained in this register
for endp in register.lstItems:
strVal = endp.getValueInAscii()
if endp.valueChanged:
if self._printSWAP:
print endp.name + " in address " + str(endp.getRegAddress()) + " changed to " + strVal
if endp.display == True:
values[endp.name] = strVal
if len(values) > 0:
if self._pluginapi is not None:
self._pluginapi.value_update(register.getAddress(), values)
def cb_poweron(self, address):
"""
This function is called when a poweron request has been received from the network.
@param address: Address of the mote to be powered-on
"""
addr = int(address)
d = defer.Deferred()
#self.manager.setNodeOn(self.home_id, node_id)
d.callback('done!')
return d
def cb_poweroff(self, address):
"""
This function is called when a poweroff request has been received from the network.
@param address: Address of the mote to be powered-off
"""
addr = int(address)
d = defer.Deferred()
#self.manager.setNodeOff(self.home_id, node_id)
d.callback('done!')
return d
def cb_thermostat(self, address, setpoint):
'''
This callback function handles setting of thermostat setpoints.
@param address: Address of the mote
@param setpoint: the setpoint to set (float)
'''
d = defer.Deferred()
"""
node = self.get_node(self.home_id, int(node_id))
if not isinstance(node, ZwaveNode):
d.callback('error1') # Specified node not available
else:
for val in node.values:
if val.value_data['commandClass'] == 'COMMAND_CLASS_THERMOSTAT_SETPOINT':
value_id = int(val.value_data['id'])
self.manager.setValue(value_id, float(setpoint))
d.callback('ok')
"""
return d
def cb_custom(self, action, parameters):
"""
Handles several custom actions used througout the plugin.
@param command: Custom command
@param parameters: Custom command parameters
@return Object requested
"""
if action == 'get_networkinfo':
motes = {}
for index, mote in enumerate(self.server.lstMotes):
moteInfo = {"address": mote.address,
"manufacturer": mote.definition.manufacturer,
"product": mote.definition.product,
"sleeping": mote.definition.pwrdownmode,
"lastupdate": datetime.datetime.fromtimestamp(mote.timestamp).strftime("%d-%m-%Y %H:%M:%S")}
motes[index] = moteInfo
d = defer.Deferred()
d.callback(motes)
return d
elif action == "get_motevalues":
values = {}
devaddress = int(parameters["mote"])
mote = self.server.getMote(address=devaddress)
i = 0
for reg in mote.lstregregs:
for endp in reg.lstItems:
valueinfo = {"type": endp.type + " " + SwapType.toString(endp.direction),
"name": endp.name,
"value": endp.getValueInAscii(),
"units": [],
"unit": endp.unit.name }
if endp.lstunits is not None and len(endp.lstunits) > 0:
for unit in endp.lstunits:
valueinfo["units"].append(unit.name)
values[i] = valueinfo
i += 1
d = defer.Deferred()
d.callback(values)
return d
elif action == "track_values":
'''
With this command you can set certain SWAP values to be tracked, and send them to the master node.
'''
address = parameters['mote']
values = parameters['values']
self.cfgdevices.setValues(address, values)
# Save config file
self.cfgdevices.save()
# Set units
mote = self.getMote(address=address)
for name, unit in values.items():
if unit != "":
param = mote.getParameter(name)
if param is not None:
param.display = True
param.setUnit(unit)
# Update specified values right now
report_values = {}
i = 0
mote = self.getMote(address=address)
for reg in mote.lstregregs:
for endp in reg.lstItems:
if endp.name in values:
report_values[endp.name] = endp.getValueInAscii()
i += 1
self._pluginapi.value_update(address, report_values)
# Return something anyway, even though we return nothing.
d = defer.Deferred()
d.callback('')
return d
def _readPluginConfig(self):
"""
Read configuration parameters of the SWAP plugin
"""
config = ConfigParser.RawConfigParser()
config.read('plugin.conf')
self.broker_host = config.get('broker', 'host')
self.broker_port = config.getint('broker', 'port')
self.pluginId = config.get('general', 'id')
self.loglevel = config.get('general', 'loglevel')
# Read devices config file
self.cfgdevices = XmlDevices()
def __init__(self, settings=None, verbose=False, monitor=False):
"""
Class constructor
@param settings: path to the main configuration file
@param verbose: Print out SWAP frames or not
@param monitor: Print out network events or not
"""
try:
# Superclass call
SwapInterface.__init__(self, settings, verbose)
except:
raise
# Print SWAP activity
self._printSWAP = monitor
# Mote address in SYNC mode
self._addrInSyncMode = None
# Read plugin config
self._readPluginConfig()
# Declare HouseAgent callbacks
callbacks = {'poweron': self.cb_poweron,
'poweroff': self.cb_poweroff,
'custom': self.cb_custom,
'thermostat_setpoint': self.cb_thermostat}
# Start plugin
self._pluginapi = PluginAPI(guid=self.pluginId, plugintype="SWAP", broker_host=self.broker_host, broker_port=self.broker_port, **callbacks)
self._pluginapi.ready()
reactor.run()
