def __init__(self):
"Set the default preferences, execute title & preferences filename."
#Set the default preferences.
self.stretchFromDistanceOverExtrusionWidth = preferences.FloatPreference(
).getFromValue('Stretch From Distance Over Extrusion Width (ratio):',
2.0)
self.stretchOverHalfExtrusionWidth = preferences.FloatPreference(
).getFromValue('Maximum Stretch Over Half Extrusion Width (ratio):',
0.3)
self.travelOverExtrusionStretch = preferences.FloatPreference(
).getFromValue('Travel Stretch Over Extrusion Stretch (ratio):', 0.2)
directoryRadio = []
self.directoryPreference = preferences.RadioLabel().getFromRadioLabel(
'Stretch All Unmodified Files in a Directory',
'File or Directory Choice:', directoryRadio, False)
self.filePreference = preferences.Radio().getFromRadio(
'Stretch File', directoryRadio, True)
self.filenameInput = preferences.Filename().getFromFilename(
[('GNU Triangulated Surface text files', '*.gts'),
('Gcode text files', '*.gcode')], 'Open File to be Stretched', '')
#Create the archive, title of the execute button, title of the dialog & preferences filename.
self.archive = [
self.stretchFromDistanceOverExtrusionWidth,
self.stretchOverHalfExtrusionWidth,
self.travelOverExtrusionStretch, self.directoryPreference,
self.filePreference, self.filenameInput
]
self.executeTitle = 'Stretch'
# self.filename = getPreferencesFilePath( 'stretch.csv' )
self.filenamePreferences = 'stretch.csv'
self.filenameHelp = 'stretch.html'
self.title = 'Stretch Preferences'
def __init__(self):
"Set the default preferences, execute title & preferences filename."
#Set the default preferences.
self.extruderPossibleCollisionConeAngle = preferences.FloatPreference(
).getFromValue('Extruder Possible Collision Cone Angle (degrees):',
60.0)
self.maximumTowerHeight = preferences.IntPreference().getFromValue(
'Maximum Tower Height (layers):', 0)
self.towerStartLayer = preferences.IntPreference().getFromValue(
'Tower Start Layer (integer):', 3)
directoryRadio = []
self.directoryPreference = preferences.RadioLabel().getFromRadioLabel(
'Tower All Unmodified Files in a Directory',
'File or Directory Choice:', directoryRadio, False)
self.filePreference = preferences.Radio().getFromRadio(
'Tower File', directoryRadio, True)
self.filenameInput = preferences.Filename().getFromFilename(
[('GNU Triangulated Surface text files', '*.gts'),
('Gcode text files', '*.gcode')], 'Open File to be Towered', '')
#Create the archive, title of the execute button, title of the dialog & preferences filename.
self.archive = [
self.extruderPossibleCollisionConeAngle, self.maximumTowerHeight,
self.towerStartLayer, self.directoryPreference,
self.filePreference, self.filenameInput
]
self.executeTitle = 'Tower'
# self.filename = getPreferencesFilePath( 'tower.csv' )
self.filenamePreferences = 'tower.csv'
self.filenameHelp = 'tower.html'
self.title = 'Tower Preferences'
def __init__(self):
"Set the default preferences, execute title & preferences filename."
#Set the default preferences.
self.comb = preferences.BooleanPreference().getFromValue(
'Comb Hair:', True)
self.writeSVG = preferences.BooleanPreference().getFromValue(
'Write Scalable Vector Graphics:', True)
directoryRadio = []
self.directoryPreference = preferences.RadioLabel().getFromRadioLabel(
'Comb All Unmodified Files in a Directory',
'File or Directory Choice:', directoryRadio, False)
self.filePreference = preferences.Radio().getFromRadio(
'Comb File', directoryRadio, True)
self.filenameInput = preferences.Filename().getFromFilename(
[('GNU Triangulated Surface text files', '*.gts'),
('Gcode text files', '*.gcode')], 'Open File to be Combed', '')
#Create the archive, title of the execute button, title of the dialog & preferences filename.
self.archive = [
self.comb, self.writeSVG, self.directoryPreference,
self.filePreference, self.filenameInput
]
self.executeTitle = 'Comb'
# self.filename = getPreferencesFilePath( 'comb.csv' )
self.filenamePreferences = 'comb.csv'
self.filenameHelp = 'comb.html'
self.title = 'Comb Preferences'
def __init__(self):
"Set the default preferences, execute title & preferences filename."
#Set the default preferences.
filletRadio = []
self.arcPoint = preferences.RadioLabel().getFromRadioLabel(
'Arc Point', 'Fillet Procedure Choice:', filletRadio, False)
self.arcRadius = preferences.Radio().getFromRadio(
'Arc Radius', filletRadio, False)
self.arcSegment = preferences.Radio().getFromRadio(
'Arc Segment', filletRadio, False)
self.bevel = preferences.Radio().getFromRadio('Bevel', filletRadio,
True)
self.doNotFillet = preferences.Radio().getFromRadio(
'Do Not Fillet', filletRadio, False)
self.filletRadiusOverHalfExtrusionWidth = preferences.FloatPreference(
).getFromValue('Fillet Radius Over Half Extrusion Width (ratio):', 0.7)
directoryRadio = []
self.directoryPreference = preferences.RadioLabel().getFromRadioLabel(
'Fillet All Unmodified Files in a Directory',
'File or Directory Choice:', directoryRadio, False)
self.filePreference = preferences.Radio().getFromRadio(
'Fillet File', directoryRadio, True)
self.filenameInput = preferences.Filename().getFromFilename(
[('GNU Triangulated Surface text files', '*.gts'),
('Gcode text files', '*.gcode')], 'Open File to be Filleted', '')
#Create the archive, title of the execute button, title of the dialog & preferences filename.
self.archive = [
self.arcPoint, self.arcRadius, self.arcSegment, self.bevel,
self.doNotFillet, self.filletRadiusOverHalfExtrusionWidth,
self.directoryPreference, self.filePreference, self.filenameInput
]
self.executeTitle = 'Fillet'
# self.filename = getPreferencesFilePath( 'fillet.csv' )
self.filenamePreferences = 'fillet.csv'
self.filenameHelp = 'fillet.html'
self.title = 'Fillet Preferences'
def __init__( self ): "Set the default preferences, execute title & preferences filename." #Set the default preferences. self.extrusionDiameter = preferences.FloatPreference().getFromValue( 'Extrusion Diameter (mm):', 0.6 ) self.extrusionFillDensity = preferences.FloatPreference().getFromValue( 'Extrusion Density (ratio):', 0.82 ) self.extrusionWidthOverThickness = preferences.FloatPreference().getFromValue( 'Extrusion Width Over Thickness (ratio):', 1.5 ) self.filenameInput = preferences.Filename().getFromFilename( [ ( 'GNU Triangulated Surface files', '*.gts' ) ], 'Open File to be Sliced', '' ) self.importCoarseness = preferences.FloatPreference().getFromValue( 'Import Coarseness (ratio):', 1.0 ) importRadio = [] self.correct = preferences.RadioLabel().getFromRadioLabel( 'Correct Mesh', 'Mesh Type:', importRadio, True ) self.unproven = preferences.Radio().getFromRadio( 'Unproven Mesh', importRadio,False ) self.importTinyDetails = preferences.BooleanPreference().getFromValue( 'Import Tiny Details:', True ) self.infillBridgeWidthOverThickness = preferences.FloatPreference().getFromValue( 'Infill Bridge Width Over Thickness (ratio):', 1.0 ) self.infillDirectionBridge = preferences.BooleanPreference().getFromValue( 'Infill in Direction of Bridges', True ) directoryRadio = [] self.directoryPreference = preferences.RadioLabel().getFromRadioLabel( 'Slice All GNU Triangulated Surface Files in a Directory', 'File or Directory:', directoryRadio, False ) self.filePreference = preferences.Radio().getFromRadio( 'Slice File', directoryRadio, True ) #Create the archive, title of the execute button, title of the dialog & preferences filename. self.archive = [ self.extrusionDiameter, self.extrusionFillDensity, self.extrusionWidthOverThickness, self.filenameInput, self.importCoarseness, self.correct, self.unproven, self.importTinyDetails, self.infillBridgeWidthOverThickness, self.infillDirectionBridge, self.directoryPreference, self.filePreference ] self.executeTitle = 'Slice' # self.filename = getPreferencesFilePath( 'slice.csv' ) self.filenamePreferences = 'slice.csv' self.filenameHelp = 'slice.html' self.title = 'Slice Preferences'
def __init__( self ): "Set the default preferences, execute title & preferences filename." #Set the default preferences. self.pixelsWidthExtrusion = preferences.FloatPreference().getFromValue( 'Pixels for the Width of the Extrusion (ratio):', 10.0 ) self.writeSkeinforgeSVG = preferences.BooleanPreference().getFromValue( 'Write Scalable Vector Graphics for Skeinforge Chain:', True ) directoryRadio = [] self.directoryPreference = preferences.RadioLabel().getFromRadioLabel( 'Write Vector Graphics for All Unmodified Files in a Directory', 'File or Directory Choice:', directoryRadio, False ) self.filePreference = preferences.Radio().getFromRadio( 'Write Vector Graphics File', directoryRadio, True ) self.filenameInput = preferences.Filename().getFromFilename( [ ( 'Gcode text files', '*.gcode' ) ], 'Open File to Write Vector Graphics for', '' ) #Create the archive, title of the execute button, title of the dialog & preferences filename. self.archive = [ self.pixelsWidthExtrusion, self.writeSkeinforgeSVG, self.directoryPreference, self.filePreference, self.filenameInput ] self.executeTitle = 'Write Vector Graphics' self.filenamePreferences = 'vectorwrite.csv' self.filenameHelp = 'vectorwrite.html' self.title = 'Vectorwrite Preferences'
def __init__(self):
"Set the default preferences, execute title & preferences filename."
#Set the default preferences.
self.diaphragmPeriod = preferences.IntPreference().getFromValue(
'Diaphragm Period (layers):', 29)
self.diaphragmThickness = preferences.IntPreference().getFromValue(
'Diaphragm Thickness (layers):', 3)
self.extraShellsBase = preferences.IntPreference().getFromValue(
'Extra Shells on Base (layers):', 0)
self.extraShellsSparseLayer = preferences.IntPreference().getFromValue(
'Extra Shells on Sparse Layer (layers):', 1)
self.feedratePerSecond = preferences.FloatPreference().getFromValue(
'Feedrate (mm/s):', 16.0)
self.filenameInput = preferences.Filename().getFromFilename(
[('GNU Triangulated Surface text files', '*.gts'),
('Gcode text files', '*.gcode')], 'Open File to be Filled', '')
self.fillBeginRotation = preferences.FloatPreference().getFromValue(
'Fill Begin Rotation (degrees):', 45.0)
self.fillDensity = preferences.FloatPreference().getFromValue(
'Fill Density (ratio):', 0.5)
self.fillOddLayerExtraRotation = preferences.FloatPreference(
).getFromValue('Fill Odd Layer Extra Rotation (degrees):', 90.0)
self.infillPerimeterOverlap = preferences.FloatPreference(
).getFromValue('Infill Perimeter Overlap (ratio):', 0.5)
self.solidSurfaceThickness = preferences.IntPreference().getFromValue(
'Solid Surface Thickness (layers):', 3)
directoryRadio = []
self.directoryPreference = preferences.RadioLabel().getFromRadioLabel(
'Fill All Unmodified Files in a Directory',
'File or Directory Choice:', directoryRadio, False)
self.filePreference = preferences.Radio().getFromRadio(
'Fill File', directoryRadio, True)
#Create the archive, title of the execute button, title of the dialog & preferences filename.
self.archive = [
self.diaphragmPeriod, self.diaphragmThickness,
self.extraShellsBase, self.extraShellsSparseLayer,
self.feedratePerSecond, self.filenameInput, self.fillBeginRotation,
self.fillDensity, self.fillOddLayerExtraRotation,
self.infillPerimeterOverlap, self.solidSurfaceThickness,
self.directoryPreference, self.filePreference
]
self.executeTitle = 'Fill'
# self.filename = getPreferencesFilePath( 'fill.csv' )
self.filenamePreferences = 'fill.csv'
self.filenameHelp = 'fill.html'
self.title = 'Fill Preferences'
