Пример #1
0
def firstnotdiv(n, primelist = None):
	"""Finds the set of primes not divisible by the
first n primes, with the least quantity of primes,
that is the distinct prime factorization of at least
one primitive abundant number"""
	if primelist == None:			#... then we have to include a parallel prime sieve, like with primes2.pf
		p = 3				#The first odd prime
		plist = [2]			#The only even prime
		if n == 0:			#If they want 6 as the result . . .
			res = [2]		#Then we have to include two in the result. We wouldn't otherwise.
			num = 2			#Why not give the numerator, denomerator, quotient and remainder straight away?
			den = 1
			q = 2
			r = 0
		else:				#Otherwise, . . .
			res = []		#We start with an empty result list.
			num = 1			#We give 1's as the num and den, as we will be using *= extensively.
			den = 1	
			q = 1			#We give bogus quotient and result, that will not pass the test the first time
			r = 0
		while len(plist)<n:		#Build up the first n primes, before we worry about the numerator and denominator.
			low = primes2.low(primes2.lim(p)+1, plist)	#Standard parallel prime sieve.
			if primes2.divtest(low, p):
				plist.append(p)
				p += 2
			else:
				p += 2
		while not test(q,r):		#While we have not found enough primes . . . (stops at the first sufficient prime)
			low = primes2.low(primes2.lim(p)+1, plist)		#Standard parallel prime sieve
			if primes2.divtest(low, p):
				plist.append(p)
				res.append(p)		#if it is prime, add it to the list
				num *= p		#Change the numerator
				den *= (p - 1)		#Change the denominator
				q, r = num/den, num%den	#Change quotient and remainder. For justification, see earlier functions.
				p += 2
			else:
				p += 2
		return res			#We do want a result, right?
	else:
		c = primelist[n:]		#Cut the first n off
		i = 0				#Initiate; index at 0, num and den at 1 (to be multiplied), q and r non-passing bogus, empty result
		num = 1
		den = 1
		q = 1
		r = 0
		res = []			#End initiation
		while not test(q,r):		#As long as we do not have enough primes, . . .
			res.append(c[i])	#We need at least one more.
			num *= c[i]		#Check if it was enough; multiply to num and den, and reset q and r.
			den *= (c[i] - 1)
			q, r = num/den, num%den
			i += 1			#Index must increase
		return res			#We are done.
Пример #2
0
def firstsquarefree(n, primelist = None):
	"""Returns the first squarefree prim. ab.
num. not divisible by the first n primes."""
	if primelist == None:			#...then another parallel prime sieve
		p = 3				#See firstnotdiv for details on the prime sieve initiation
		plist = [2]
		if n == 0:			#We save time by only checking odds for primality; 2 must be a special case.
			res = [(2, 1)]		#Just give the true values for initiation here.
			num = 3
			den = 2
			q = 1
		else:				#Initiate empty result, multiplicative identity for num and den, and bogus, not-passing q
			res = []
			num = 1
			den = 1
			q = 1
		while len(plist)<n:		#Standard prime sieve. Build up the list of primes to the necessary length.
			low = primes2.low(primes2.lim(p)+1, plist)
			if primes2.divtest(low, p):
				plist.append(p)
				p += 2
			else:
				p += 2
		while q<2:			#Will stop just after we pass the test, for the first time
			low = primes2.low(primes2.lim(p)+1, plist)	#Standard parallel prime sieve
			if primes2.divtest(low, p):
				plist.append(p)
				res.append((p, 1))			#In this case, we are returning prime factorization, not just a prime list
				num *= (p+1)				#Exponent, of one, not infinity, here; must be remembered
				den *= p
				q = num/den				#Reset the quotioned
				p += 2
			else:
				p += 2
		return (den, res) 		#As the denominator is the product of the primes, it is also the sought-after number. res is its pf.
	else:
		c = primelist[n:]
		i = 0
		num = 1
		den = 1
		q = 1
		res = []
		while q<2:
			res.append((c[i], 1))
			num *= (c[i] + 1)
			den *= c[i]
			q = num/den
			i += 1
		return (den, res)
Пример #3
0
def probdiv(lst):
	l = number_theory2.LCM2(lst)
	count = 0
	i = 0
	while i<l:
		i += 1
		count += not primes2.divtest(lst, i)
	return float(count)/l
Пример #4
0
def lastprime(factors, primelist = None):
	"""Finds the last prime such that the list
of primes in factors and that prime
are the distinct prime factorization
of at least one primitive abundant
number"""
	if primelist == None:		# . . . then yet another parallel prime sieve.
		M = maxdef(factors)	#We need the maximum deficiency of the set of numbers
		if M == None:		#If there is no maximum deficiency to speak of . . .
			return None	#There is no last prime
		if M[1] == 2:		#If this was one of those infinite perfect numbers (only known: 2**inifinity), we don't want an infinite loop
			return "all primes valid"	# . . . as there is no last prime
		num = M[-2]		#Otherwise, we read off num and den from the maximum deficiency
		den = M[-1]
		cand = []		#This is the list of all the primes that satisfy the conditions, except the last element
		plist = [2]		#We must include the oddest prime, as all we will check is odd numbers.
		p = 1			#Because it is 2 less than three, and here, on a whim, I decided to increment at the beginning of the loop.
		q, r = 3, 0		#Bogus passing values.
		while test(q,r):	# . . . while we are still dealing with satisfactory primes.
			p += 2		#Increment our prime
			l = int(p**0.5)	#Standard parallel prime sieve.
			low = primes2.low(primes2.lim(p)+1, plist)
			if primes2.divtest(low, p):		#If p is prime
				plist.append(p)			#We add it to the list of primes.
				if p not in factors:		#We don't want repetitions
					cand.append(p)		#Add it to the list of candidates, . . .
					a, b = num*p, den*(p-1)
					q, r = a/b, a%b 	#And recaluculate q and r
		if len(cand) <= 1:	#If the first new prime failed . . .
			return None	#Then there is no last passing prime
		else:
			return cand[-2]		#Otherwise, we return the last prime that did not fail.
	else:
		M = maxdef(factors)	#Same as above, but without the parallel prime sieve.
		if M == None:
			return None
		if M[1] == 2:
			return "all primes valid"
		num = M[-2]
		den = M[-1]
		m = max(factors)
		c = [x for x in primelist if x > m]
		i = -1 
		q, r = 3, 0 
		while test(q, r):	
			i += 1
			p = c[i]
			a = num*p 
			b = den*(p-1)
			q, r = a/b, a%b
		if i == 0:
			return None
		else:
			return c[i-1]