def boot_printer_input():
id[2] = True
ids = [protocol.single[code][0] for code in ('ID', 'STARTUP')]
# CMD:1 ID:8 Checksum:3
while len(id[0]) < 12:
try:
data = printer.read(12 - len(id[0]))
except OSError:
continue
except IOError:
continue
id[0] += data
#log('incomplete id: ' + id[0])
if len(id[0]) < 12:
return True
if id[0][0] not in ids or not protocol.check(id[0]):
log('skip non-id: %s (%s)' % (''.join('%02x' % x for x in id[0]), repr(id[0])))
f = len(id[0])
for start in ids:
if start in id[0][1:]:
p = id[0].index(bytes((start,)))
if p < f:
f = p
log('Keeping some')
if f == 0:
f = 1
id[0] = id[0][f:]
return True
# We have something to handle; cancel the timeout, but keep the serial port open to avoid a reset. (I don't think this even works, but it doesn't hurt.)
websocketd.remove_timeout(timeout_handle[0])
# This printer was running and tried to send an id. Check the id.
id[0] = id[0][1:9]
if id[0] in orphans:
log('accepting orphan %s on %s' % (''.join('%02x' % x for x in id[0]), port))
ports[port] = orphans.pop(id[0])
ports[port].port = port
def close_port(success, data):
log('reconnect complete; closing server port')
printer.close()
log('reconnecting %s' % port)
ports[port].call('reconnect', ['admin', port], {}, lambda success, ret: ports[port].call('send_printer', ['admin', None], {}, close_port) if success else close_port)
broadcast(None, 'port_state', port, 2)
return False
run_id = nextid()
log('accepting unknown printer on port %s (id %s)' % (port, ''.join('%02x' % x for x in run_id)))
#log('orphans: %s' % repr(tuple(orphans.keys())))
process = subprocess.Popen((fhs.read_data('driver.py', opened = False), '--cdriver', fhs.read_data('franklin-cdriver', opened = False), '--port', port, '--run-id', run_id, '--allow-system', config['allow-system']) + (('--system',) if fhs.is_system else ()), stdin = subprocess.PIPE, stdout = subprocess.PIPE, close_fds = True)
ports[port] = Port(port, process, printer, run_id)
return False
def boot_printer_input(fd, cond):
id[2] = True
ids = [protocol.single[code] for code in ('ID', 'STARTUP')]
# CMD:1 ID:8 Checksum:3
while len(id[0]) < 12:
data = printer.read(12 - len(id[0]))
id[0] += data
#log('incomplete id: ' + id[0])
if len(id[0]) < 12:
return True
if id[0][0] not in ids or not protocol.check(map(ord, id[0])):
log('skip non-id: %s (%s)' % (''.join('%02x' % ord(x) for x in id[0]), repr(id[0])))
f = len(id[0])
for start in ids:
if start in id[0][1:]:
p = id[0].index(start)
if p < f:
f = p
log('Keeping some')
break
else:
id[0] = ''
id[0] = id[0][f:]
return True
# We have something to handle; cancel the timeout, but keep the serial port open to avoid a reset. (I don't think this even works, but it doesn't hurt.)
GLib.source_remove(timeout_handle)
# This printer was running and tried to send an id. Check the id.
id[0] = id[0][1:9]
if id[0] in orphans:
log('accepting orphan %s on %s' % (id[0], port))
ports[port] = orphans.pop(id[0])
ports[port].port = port
def close_port(success, data):
log('reconnect complete; closing server port')
printer.close()
log('reconnecting %s' % port)
ports[port].call('reconnect', ['admin', port], {}, lambda success, ret: ports[port].call('send_printer', ['admin', None], {}, close_port) if success else close_port)
return False
run_id = nextid()
log('accepting unknown printer on port %s (id %s)' % (port, ''.join('%02x' % ord(x) for x in run_id)))
log('orphans: %s' % repr(orphans.keys()))
process = subprocess.Popen((config['driver'], '--cdriver', config['cdriver'], '--port', port, '--run-id', run_id, '--allow-system', config['allow-system']) + (('--system',) if fhs.is_system else ()), stdin = subprocess.PIPE, stdout = subprocess.PIPE, close_fds = True)
ports[port] = Port(port, process, printer, run_id)
return False
def boot_printer_input(fd, cond):
id[2] = True
ids = [protocol.single[code][0] for code in ('ID', 'STARTUP')]
# CMD:1 ID:8 Checksum:3
while len(id[0]) < 12:
try:
data = printer.read(12 - len(id[0]))
except OSError:
continue
except IOError:
continue
id[0] += data
#log('incomplete id: ' + id[0])
if len(id[0]) < 12:
return True
if id[0][0] not in ids or not protocol.check(id[0]):
log('skip non-id: %s (%s)' %
(''.join('%02x' % x for x in id[0]), repr(id[0])))
f = len(id[0])
for start in ids:
if start in id[0][1:]:
p = id[0].index(bytes((start, )))
if p < f:
f = p
log('Keeping some')
if f == 0:
f = 1
id[0] = id[0][f:]
return True
# We have something to handle; cancel the timeout, but keep the serial port open to avoid a reset. (I don't think this even works, but it doesn't hurt.)
GLib.source_remove(timeout_handle)
# This printer was running and tried to send an id. Check the id.
id[0] = id[0][1:9]
if id[0] in orphans:
log('accepting orphan %s on %s' %
(''.join('%02x' % x for x in id[0]), port))
ports[port] = orphans.pop(id[0])
ports[port].port = port
def close_port(success, data):
log('reconnect complete; closing server port')
printer.close()
log('reconnecting %s' % port)
ports[port].call(
'reconnect', ['admin', port], {},
lambda success, ret: ports[port].call(
'send_printer', ['admin', None], {}, close_port)
if success else close_port)
return False
run_id = nextid()
log('accepting unknown printer on port %s (id %s)' %
(port, ''.join('%02x' % x for x in run_id)))
#log('orphans: %s' % repr(tuple(orphans.keys())))
process = subprocess.Popen(
(fhs.read_data('driver.py', opened=False), '--cdriver',
fhs.read_data('cdriver', opened=False), '--port', port,
'--run-id', run_id, '--allow-system', config['allow-system'])
+ (('--system', ) if fhs.is_system else ()),
stdin=subprocess.PIPE,
stdout=subprocess.PIPE,
close_fds=True)
ports[port] = Port(port, process, printer, run_id)
return False
def boot_machine_input():
id[2] = True
ids = [protocol.single[code][0] for code in ('ID', 'STARTUP')]
# CMD:1 ID:8 + 16 Checksum:9 Total: 34
while len(id[0]) < 34:
try:
data = machine.read(34 - len(id[0]))
except OSError:
continue
except IOError:
continue
id[0] += data
#log('incomplete id: ' + id[0])
if len(id[0]) < 34:
if len(id[0]) > 0 and id[0][0] == protocol.single[
'CONTROLLER'][0]:
# This is a controller. Spawn the process, then cancel this detection.
websocketd.remove_timeout(timeout_handle[0])
machine.close()
ports[port] = None
broadcast(None, 'port_state', port, 0)
log('Starting controller driver on ' + port)
env = os.environ.copy()
env['PORT'] = port
subprocess.Popen(config['controller'],
env=env,
shell=True)
return False
return True
if id[0][0] not in ids or not protocol.check(id[0]):
log('skip non-id: %s (%s)' %
(''.join('%02x' % x for x in id[0]), repr(id[0])))
f = len(id[0])
for start in ids:
if start in id[0][1:]:
p = id[0].index(bytes((start, )), 1)
if p < f:
f = p
log('Keeping some')
if f == 0:
f = 1
id[0] = id[0][f:]
return True
# We have something to handle; cancel the timeout, but keep the serial port open to avoid a reset. (I don't think this even works, but it doesn't hurt.)
websocketd.remove_timeout(timeout_handle[0])
# This machine was running and tried to send an id. Check the id.
uuid = id[0][9:9 + 16]
if (uuid[7] & 0xf0) != 0x40 or (uuid[9] & 0xc0) != 0x80:
# Broken uuid; create a new one and set it.
log('broken uuid: ' + repr(uuid))
uuid = None
else:
uuid = ''.join('%02x' % x for x in uuid[:16])
uuid = uuid[:8] + '-' + uuid[8:12] + '-' + uuid[
12:16] + '-' + uuid[16:20] + '-' + uuid[20:32]
id[0] = id[0][1:9]
running_machine = [
p for p in machines if machines[p].run_id == id[0]
]
assert len(running_machine) < 2
if len(running_machine) > 0:
p = running_machine[0]
assert p.uuid == uuid
if p.port is not None:
disable(
p.uuid,
'disabled machine which was detected on different port'
)
log('rediscovered machine %s on %s' %
(''.join('%02x' % x for x in id[0]), port))
ports[port] = p.uuid
p.port = port
def close_port(success, data):
log('reconnect complete; closing server port')
machine.close()
p.call(
'reconnect', ['admin', port], {},
lambda success, ret: (ports[port].call(
'send_machine', ['admin', None], {}, close_port)
if success else close_port()))
broadcast(None, 'port_state', port, 2)
return False
run_id = nextid()
# Find uuid or create new Machine object.
if uuid in machines:
log('accepting known machine on port %s (uuid %s)' %
(port, uuid))
machines[uuid].port = port
ports[port] = uuid
log('connecting %s to port %s' % (uuid, port))
machines[uuid].call('connect',
['admin', port, [chr(x) for x in run_id]],
{}, lambda success, ret: None)
else:
log('accepting unknown machine on port %s' % port)
# Close detect port so it doesn't interfere.
machine.close()
#log('machines: %s' % repr(tuple(machines.keys())))
process = subprocess.Popen(
(fhs.read_data('driver.py', opened=False), '--uuid',
uuid if uuid is not None else '', '--allow-system',
config['allow-system']) +
(('--system', ) if fhs.is_system else
()) + (('--arc', 'False') if not config['arc'] else ()),
stdin=subprocess.PIPE,
stdout=subprocess.PIPE,
close_fds=True)
new_machine = Machine(port,
process,
run_id,
send=uuid is not None)
def finish():
log('finish detect %s' % repr(uuid))
ports[port] = uuid
machines[uuid] = new_machine
log('connecting new machine %s to port %s' % (uuid, port))
new_machine.call('connect',
['admin', port, [chr(x) for x in run_id]],
{}, lambda success, ret: None)
if uuid is None:
def prefinish(success, uuid):
assert success
new_machine.uuid = uuid
new_machine.finish(finish)
new_machine.call('reset_uuid', ['admin'], {}, prefinish)
else:
finish()
return False
def boot_printer_input():
id[2] = True
ids = [protocol.single[code][0] for code in ('ID', 'STARTUP')]
# CMD:1 ID:8 + 16 Checksum:9 Total: 34
while len(id[0]) < 34:
try:
data = printer.read(34 - len(id[0]))
except OSError:
continue
except IOError:
continue
id[0] += data
#log('incomplete id: ' + id[0])
if len(id[0]) < 34:
return True
if id[0][0] not in ids or not protocol.check(id[0]):
log('skip non-id: %s (%s)' %
(''.join('%02x' % x for x in id[0]), repr(id[0])))
f = len(id[0])
for start in ids:
if start in id[0][1:]:
p = id[0].index(bytes((start, )), 1)
if p < f:
f = p
log('Keeping some')
if f == 0:
f = 1
id[0] = id[0][f:]
return True
# We have something to handle; cancel the timeout, but keep the serial port open to avoid a reset. (I don't think this even works, but it doesn't hurt.)
websocketd.remove_timeout(timeout_handle[0])
# This printer was running and tried to send an id. Check the id.
uuid = id[0][9:9 + 16]
if (uuid[7] & 0xf0) != 0x40 or (uuid[9] & 0xc0) != 0x80:
# Broken uuid; create a new one and set it.
log('broken uuid: ' + repr(uuid))
uuid = None
else:
uuid = ''.join('%02x' % x for x in uuid[:16])
uuid = uuid[:8] + '-' + uuid[8:12] + '-' + uuid[
12:16] + '-' + uuid[16:20] + '-' + uuid[20:32]
id[0] = id[0][1:9]
running_printer = [
p for p in printers if printers[p].run_id == id[0]
]
assert len(running_printer) < 2
if len(running_printer) > 0:
p = running_printer[0]
assert p.uuid == uuid
if p.port is not None:
disable(
p.uuid,
'disabled printer which was detected on different port'
)
log('rediscovered printer %s on %s' %
(''.join('%02x' % x for x in id[0]), port))
ports[port] = p.uuid
p.port = port
def close_port(success, data):
log('reconnect complete; closing server port')
printer.close()
p.call(
'reconnect', ['admin', port], {},
lambda success, ret: (ports[port].call(
'send_printer', ['admin', None], {}, close_port)
if success else close_port()))
broadcast(None, 'port_state', port, 2)
return False
run_id = nextid()
# Find uuid or create new Printer object.
if uuid in printers:
log('accepting known printer on port %s (uuid %s)' %
(port, uuid))
printers[uuid].port = port
ports[port] = uuid
log('connecting %s to port %s' % (uuid, port))
printers[uuid].call('connect',
['admin', port, [chr(x) for x in run_id]],
{}, lambda success, ret: None)
else:
log('accepting unknown printer on port %s' % port)
#log('printers: %s' % repr(tuple(printers.keys())))
process = subprocess.Popen(
(fhs.read_data('driver.py', opened=False), '--cdriver',
fhs.read_data('franklin-cdriver', opened=False), '--uuid',
uuid if uuid is not None else '', '--allow-system',
config['allow-system']) +
(('--system', ) if fhs.is_system else
()) + (('--arc', 'False') if not config['arc'] else ()),
stdin=subprocess.PIPE,
stdout=subprocess.PIPE,
close_fds=True)
new_printer = Printer(port, process, printer, run_id)
def finish(success, uuid):
assert success
ports[port] = uuid
printers[uuid] = new_printer
log('connecting new printer %s to port %s' % (uuid, port))
new_printer.call('connect',
['admin', port, [chr(x) for x in run_id]],
{}, lambda success, ret: None)
if uuid is None:
new_printer.call('reset_uuid', ['admin'], {}, finish)
else:
finish(True, uuid)
return False
def boot_machine_input():
id[2] = True
ids = [protocol.single[code][0] for code in ('ID', 'STARTUP')]
# CMD:1 ID:8 + 16 Checksum:9 Total: 34
while len(id[0]) < 34:
try:
data = machine.read(34 - len(id[0]))
except OSError:
continue
except IOError:
continue
id[0] += data
#log('incomplete id: ' + id[0])
if len(id[0]) < 34:
if len(id[0]) > 0 and id[0][0] == protocol.single['CONTROLLER'][0]:
# This is a controller. Spawn the process, then cancel this detection.
websocketd.remove_timeout(timeout_handle[0])
machine.close()
ports[port] = None
broadcast(None, 'port_state', port, 0)
log('Starting controller driver on ' + port)
env = os.environ.copy()
env['PORT'] = port
subprocess.Popen(config['controller'], env = env, shell = True)
return False
return True
if id[0][0] not in ids or not protocol.check(id[0]):
log('skip non-id: %s (%s)' % (''.join('%02x' % x for x in id[0]), repr(id[0])))
f = len(id[0])
for start in ids:
if start in id[0][1:]:
p = id[0].index(bytes((start,)), 1)
if p < f:
f = p
log('Keeping some')
if f == 0:
f = 1
id[0] = id[0][f:]
return True
# We have something to handle; cancel the timeout, but keep the serial port open to avoid a reset. (I don't think this even works, but it doesn't hurt.)
websocketd.remove_timeout(timeout_handle[0])
# This machine was running and tried to send an id. Check the id.
uuid = id[0][9:9 + 16]
if (uuid[7] & 0xf0) != 0x40 or (uuid[9] & 0xc0) != 0x80:
# Broken uuid; create a new one and set it.
log('broken uuid: ' + repr(uuid))
uuid = None
else:
uuid = ''.join('%02x' % x for x in uuid[:16])
uuid = uuid[:8] + '-' + uuid[8:12] + '-' + uuid[12:16] + '-' + uuid[16:20] + '-' + uuid[20:32]
id[0] = id[0][1:9]
running_machine = [p for p in machines if machines[p].run_id == id[0]]
assert len(running_machine) < 2
if len(running_machine) > 0:
p = running_machine[0]
assert p.uuid == uuid
if p.port is not None:
disable(p.uuid, 'disabled machine which was detected on different port')
log('rediscovered machine %s on %s' % (''.join('%02x' % x for x in id[0]), port))
ports[port] = p.uuid
p.port = port
def close_port(success, data):
log('reconnect complete; closing server port')
machine.close()
p.call('reconnect', ['admin', port], {}, lambda success, ret: (ports[port].call('send_machine', ['admin', None], {}, close_port) if success else close_port()))
broadcast(None, 'port_state', port, 2)
return False
run_id = nextid()
# Find uuid or create new Machine object.
if uuid in machines:
log('accepting known machine on port %s (uuid %s)' % (port, uuid))
machines[uuid].port = port
ports[port] = uuid
log('connecting %s to port %s' % (uuid, port))
machines[uuid].call('connect', ['admin', port, [chr(x) for x in run_id]], {}, lambda success, ret: None)
else:
log('accepting unknown machine on port %s' % port)
# Close detect port so it doesn't interfere.
machine.close()
#log('machines: %s' % repr(tuple(machines.keys())))
process = subprocess.Popen((fhs.read_data('driver.py', opened = False), '--uuid', uuid if uuid is not None else '', '--allow-system', config['allow-system']) + (('--system',) if fhs.is_system else ()) + (('--arc', 'False') if not config['arc'] else ()), stdin = subprocess.PIPE, stdout = subprocess.PIPE, close_fds = True)
new_machine = Machine(port, process, run_id, send = False)
def finish():
log('finish detect %s' % repr(uuid))
ports[port] = uuid
machines[uuid] = new_machine
log('connecting new machine %s to port %s' % (uuid, port))
new_machine.call('connect', ['admin', port, [chr(x) for x in run_id]], {}, lambda success, ret: None)
if uuid is None:
def prefinish(success, uuid):
assert success
new_machine.uuid = uuid
new_machine.finish(finish)
new_machine.call('reset_uuid', ['admin'], {}, prefinish)
else:
new_machine.finish(finish)
return False