def of_demo_15():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 15 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# VLAN ID
# Input Port
eth_type = ETH_TYPE_IPv4
vlan_id = 100
input_port = 3
# --- Flow Actions: Push VLAN: Ethernet Type
# Set Field: VLAN ID
# Output: Port Number
push_eth_type = ETH_TYPE_DOT1AD # 802.1ad VLAN tagged frame
push_vlan_id = 200
output_port = 5
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(eth_type), vlan_id, input_port))
print(" Action: Push VLAN (Ethernet Type=%s)" %
(hex(push_eth_type)))
print(" Set Field (VLAN ID=%s)" % (push_vlan_id))
print(" Output (to Physical Port Number %s)" %
(output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name="Push VLAN")
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 22
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1013)
flow_entry.set_flow_cookie(cookie=407)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=3400)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'PushVlan'
# 'SetField'
# 'Output'
instruction = Instruction(instruction_order=0)
action = PushVlanHeaderAction(order=0)
action.set_eth_type(eth_type=push_eth_type)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_vlan_id(vid=push_vlan_id)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_vlan_id(vlan_id)
match.set_in_port(in_port=input_port)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully read from the Controller")
print("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(
"<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully removed from the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
icmpv6_type, icmpv6_code, metadata))
print (" Action: Output (to %s)" % output_port)
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 26
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_name(flow_name = "demo20.py")
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority = 1019)
flow_entry.set_flow_cookie(cookie = 250)
flow_entry.set_flow_cookie_mask(cookie_mask = 255)
flow_entry.set_flow_hard_timeout(hard_timeout = 1200)
flow_entry.set_flow_idle_timeout(idle_timeout = 3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order = 0)
action = OutputAction(order = 0, port = output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
def of_demo_20():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 20 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# ICMPv6 type
# ICMPv6 Code
# Metadata
eth_type = ETH_TYPE_IPv6
ip_dscp = IP_DSCP_CS7 # 'Class Selector' = 'Network'
ip_ecn = IP_ECN_CE # 'Congestion Encountered'
ipv6_src = "1234:5678:9ABC:DEF0:FDCD:A987:6543:210F/76"
ipv6_dst = "2000:2abc:edff:fe00::3456/94"
ipv6_flabel = 15
ip_proto = IP_PROTO_ICMPv6
icmpv6_type = 1 # 'Destination Unreachable'
icmpv6_code = 3 # 'Address Unreachable'
metadata = "0x0123456789ABCDEF"
# --- Flow Actions: Output (CONTROLLER)
output_port = "CONTROLLER"
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" IP DSCP (%s)\n"
" IP ECN (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)\n"
" IPv6 Flow Label (%s)\n"
" ICMPv6 Type (%s)\n"
" ICMPv6 Code (%s)\n"
" Metadata (%s)" %
(hex(eth_type), ip_dscp, ip_ecn, ipv6_src, ipv6_dst, ipv6_flabel,
icmpv6_type, icmpv6_code, metadata))
print(" Action: Output (to %s)" % (output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 26
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_name(flow_name="demo20.py")
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1019)
flow_entry.set_flow_cookie(cookie=250)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=1200)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# IP protocol number (ICMPv6)
# ICMPv6 Type
# ICMPv6 Code
# Metadata
match = Match()
match.set_eth_type(eth_type)
match.set_ip_dscp(ip_dscp)
match.set_ip_ecn(ip_ecn)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ipv6_flabel(ipv6_flabel)
match.set_ip_proto(ip_proto)
match.set_icmpv6_type(icmpv6_type)
match.set_icmpv6_code(icmpv6_code)
match.set_metadata(metadata)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully read from the Controller")
print("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(
"<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully removed from the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_16():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 16 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
eth_type = ETH_TYPE_IPv6
ipv6_src = "fe80::2acf:e9ff:fe21:6431/128"
ipv6_dst = "aabb:1234:2acf:e9ff::fe21:6431/64"
# --- Flow Actions: Output (CONTROLLER)
output_port = "CONTROLLER"
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)" %
(hex(eth_type), ipv6_src, ipv6_dst))
print (" Action: Output (to %s)" %
(output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
fname = "match=ipv6_src,ipv6_dst;actions=output:Controller"
flow_entry.set_flow_name(flow_name=fname)
table_id = 0
flow_id = 23
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1014)
flow_entry.set_flow_cookie(cookie=408)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=3400)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_15():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 15 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# VLAN ID
# Input Port
eth_type = ETH_TYPE_IPv4
vlan_id = 100
input_port = 3
# --- Flow Actions: Push VLAN: Ethernet Type
# Set Field: VLAN ID
# Output: Port Number
push_eth_type = ETH_TYPE_DOT1AD # 802.1ad VLAN tagged frame
push_vlan_id = 200
output_port = 5
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(eth_type), vlan_id, input_port))
print (" Action: Push VLAN (Ethernet Type=%s)" %
(hex(push_eth_type)))
print (" Set Field (VLAN ID=%s)" %
(push_vlan_id))
print (" Output (to Physical Port Number %s)" %
(output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name="Push VLAN")
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 22
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1013)
flow_entry.set_flow_cookie(cookie=407)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=3400)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'PushVlan'
# 'SetField'
# 'Output'
instruction = Instruction(instruction_order=0)
action = PushVlanHeaderAction(order=0)
action.set_eth_type(eth_type=push_eth_type)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_vlan_id(vid=push_vlan_id)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_vlan_id(vlan_id)
match.set_in_port(in_port=input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_25():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 25 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
table_id = 0
priority = 500
cookie = 1000
cookie_mask = 255
customer_port = 110
provider_port = 111
qinq_eth_type = ETH_TYPE_STAG # 802.1ad (QinQ) VLAN tagged frame
dot1q_eth_type = ETH_TYPE_CTAG # 802.1q VLAN tagged frame
arp_eth_type = ETH_TYPE_ARP
ip_eth_type = ETH_TYPE_IPv4
provider_vlan_id = 100 # Provider VLAN
customer_vlan_id = 998 # Customer VLAN
first_flow_id = 31
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
% (ctrlIpAddr, nodeName))
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)"
% (hex(arp_eth_type), customer_vlan_id, customer_port))
print (" Action: Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)"
% (hex(qinq_eth_type), provider_vlan_id,
hex(dot1q_eth_type), customer_vlan_id,
provider_port))
time.sleep(rundelay)
flow_id = first_flow_id
flow_entry1 = FlowEntry()
flow_entry1.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=110,arp;" + \
"actions:push-QINQ-tag,mod_vlan=100," + \
"push-DOT1Q-tag,mod_vlan=998,output:111)"
flow_entry1.set_flow_name(flow_name=fname)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_hard_timeout(hard_timeout=600)
flow_entry1.set_flow_idle_timeout(idle_timeout=300)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(provider_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = PushVlanHeaderAction(action_order)
action.set_eth_type(dot1q_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(customer_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, provider_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
match = Match()
match.set_eth_type(arp_eth_type)
match.set_vlan_id(customer_vlan_id)
match.set_in_port(in_port=customer_port)
flow_entry1.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id+1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)"
% (hex(ip_eth_type), customer_vlan_id, customer_port))
print (" Action: Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)"
% (hex(qinq_eth_type), provider_vlan_id,
hex(dot1q_eth_type), customer_vlan_id,
provider_port))
time.sleep(rundelay)
flow_id += 1
flow_entry2 = FlowEntry()
flow_entry2.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=110,ip;" + \
"actions:push-QINQ-tag,mod_vlan=100,output:111)"
flow_entry2.set_flow_name(flow_name=fname)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_hard_timeout(hard_timeout=600)
flow_entry2.set_flow_idle_timeout(idle_timeout=300)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(provider_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = PushVlanHeaderAction(action_order)
action.set_eth_type(dot1q_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(customer_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, provider_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
match = Match()
match.set_eth_type(ip_eth_type)
match.set_vlan_id(customer_vlan_id)
match.set_in_port(in_port=customer_port)
flow_entry2.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id+1))
exit(0)
# ---------------------------------------------------
# Third flow entry
# ---------------------------------------------------
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)"
% (hex(arp_eth_type), provider_vlan_id, provider_port))
print (" Action: Pop VLAN\n"
" Output (Physical Port number %s)"
% (customer_port))
time.sleep(rundelay)
flow_id += 1
flow_entry3 = FlowEntry()
flow_entry3.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=111,arp,vid=100;" + \
"actions:pop-vlan-tag,output=110)"
flow_entry3.set_flow_name(flow_name=fname)
flow_entry3.set_flow_id(flow_id)
flow_entry3.set_flow_hard_timeout(hard_timeout=600)
flow_entry3.set_flow_idle_timeout(idle_timeout=300)
flow_entry3.set_flow_priority(priority)
flow_entry3.set_flow_cookie(cookie)
flow_entry3.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PopVlanHeaderAction(action_order)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, customer_port)
instruction.add_apply_action(action)
flow_entry3.add_instruction(instruction)
match = Match()
match.set_eth_type(arp_eth_type)
match.set_vlan_id(provider_vlan_id)
match.set_in_port(provider_port)
flow_entry3.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry3.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry3)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id+1))
exit(0)
# ---------------------------------------------------
# Fourth flow entry
# ---------------------------------------------------
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)"
% (hex(ip_eth_type), provider_vlan_id, provider_port))
print (" Action: Pop VLAN\n"
" Output (Physical Port number %s)"
% (customer_port))
time.sleep(rundelay)
flow_id += 1
flow_entry4 = FlowEntry()
flow_entry4.set_flow_table_id(table_id)
flow_entry4.set_flow_id(flow_id)
fname = "[MLX1-A] Test flow (match:inport=111,ip,vid=100;" + \
"actions:pop-vlan-tag,output=110)"
flow_entry4.set_flow_name(flow_name=fname)
flow_entry4.set_flow_hard_timeout(hard_timeout=600)
flow_entry4.set_flow_idle_timeout(idle_timeout=300)
flow_entry4.set_flow_priority(priority)
flow_entry4.set_flow_cookie(cookie)
flow_entry4.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PopVlanHeaderAction(action_order)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, customer_port)
instruction.add_apply_action(action)
flow_entry4.add_instruction(instruction)
match = Match()
match.set_eth_type(ip_eth_type)
match.set_vlan_id(provider_vlan_id)
match.set_in_port(provider_port)
flow_entry4.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry4.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry4)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id+1))
exit(0)
print ("\n")
print ("<<< Get configured flows from the Controller")
time.sleep(rundelay)
for i in range(first_flow_id, flow_id+1):
result = ofswitch.get_configured_flow(table_id, i)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow '%s' successfully read from the Controller" % i)
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id+1))
exit(0)
print ("\n")
print ("<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName))
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id+1))
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_9():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 9 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# TCP Source Port Number
# TCP Destination Port Number
# IP DSCP
# Input Port
# NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
eth_type = ETH_TYPE_IPv4
eth_src = "00:00:00:11:23:ae"
eth_dst = "ff:ff:29:01:19:61"
ipv4_src = "17.1.2.3/8"
ipv4_dst = "172.168.5.6/16"
ip_proto = IP_PROTO_TCP
# Assured Forwarding ('class'=1, 'drop precedence'=2)
ip_dscp = IP_DSCP_AF12
tcp_src_port = 25364
tcp_dst_port = 8080
input_port = 13
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" IP Protocol Number (%s)\n"
" IP DSCP (%s)\n"
" TCP Source Port Number (%s)\n"
" TCP Destination Port Number (%s)\n"
" Input Port (%s)" %
(hex(eth_type), eth_src,
eth_dst, ipv4_src, ipv4_dst,
ip_proto, ip_dscp,
tcp_src_port, tcp_dst_port,
input_port))
print (" Action: Output (NORMAL)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 16
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1007)
flow_entry.set_flow_cookie(cookie=101)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Action: 'Output' NORMAL
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="NORMAL")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# IP ECN
# TCP Source Port Number
# TCP Destination Port Number
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_ipv4_src(ipv4_src)
match.set_ipv4_dst(ipv4_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_tcp_src(tcp_src_port)
match.set_tcp_dst(tcp_dst_port)
match.set_in_port(input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_8():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 8 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# Input Port
# NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
eth_type = ETH_TYPE_IPv4
eth_src = "00:1c:01:00:23:aa"
eth_dst = "00:02:02:60:ff:fe"
ipv4_src = "10.0.245.1/24"
ipv4_dst = "192.168.1.123/16"
ip_proto = IP_PROTO_TLSP
ip_dscp = IP_DSCP_CS3 # 'Class Selector' = 'Flash'
input_port = 13
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
% (ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" IP Protocol Number (%s)\n"
" IP DSCP (%s)\n"
" Input Port (%s)"
% (hex(eth_type), eth_src,
eth_dst, ipv4_src, ipv4_dst,
ip_proto, ip_dscp,
input_port))
print (" Action: Output (CONTROLLER)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 15
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1006)
flow_entry.set_flow_cookie(cookie=100)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Action: 'Output' to CONTROLLER
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER", max_len=60)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_ipv4_src(ipv4_src)
match.set_ipv4_dst(ipv4_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_in_port(input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node"
% (flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_22():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 22 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# Input Port
# IPv4 Destination Address
eth_type = ETH_TYPE_IPv4
in_port = 13
ipv4_dst = "10.12.5.4/32"
# --- Flow Actions: Push MPLS
# Set Field
# Output
push_ether_type = ETH_TYPE_MPLS_UCAST
mpls_label = 27
output_port = 14
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" IPv4 Destination Address (%s)" %
(hex(eth_type), in_port, ipv4_dst))
print(
" Action: Push MPLS Header (Ethernet Type %s)\n"
" Set Field (MPLS label %s)\n"
" Output (Physical Port number %s)" %
(hex(push_ether_type), mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 28
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_name(flow_name="Push MPLS Label")
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1021)
flow_entry.set_flow_cookie(cookie=654)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Push MPLS Header'
# 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = PushMplsHeaderAction(order=0)
action.set_eth_type(push_ether_type)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_mpls_label(mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# IPv4 Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_ipv4_dst(ipv4_dst)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
print("\n")
print("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully read from the Controller")
print("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(
"<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully removed from the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_23():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 23 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# Input Port
# IPv4 Destination Address
eth_type = ETH_TYPE_MPLS_UCAST
in_port = 13
mpls_label = 27
# --- Flow Actions: Set Field
# Output
new_mpls_label = 44
output_port = 14
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" MPLS Label (%s)" %
(hex(eth_type), in_port, mpls_label))
print (" Action: Set Field (MPLS Label %s)\n"
" Output (Physical Port number %s)" %
(new_mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 29
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name="Change MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1022)
flow_entry.set_flow_cookie(cookie=401)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = SetFieldAction(order=0)
action.set_mpls_label(new_mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=2)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# MPLS Label
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_mpls_label(mpls_label)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_20():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 20 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# ICMPv6 type
# ICMPv6 Code
# Metadata
eth_type = ETH_TYPE_IPv6
ip_dscp = IP_DSCP_CS7 # 'Class Selector' = 'Network'
ip_ecn = IP_ECN_CE # 'Congestion Encountered'
ipv6_src = "1234:5678:9ABC:DEF0:FDCD:A987:6543:210F/76"
ipv6_dst = "2000:2abc:edff:fe00::3456/94"
ipv6_flabel = 15
ip_proto = IP_PROTO_ICMPv6
icmpv6_type = 1 # 'Destination Unreachable'
icmpv6_code = 3 # 'Address Unreachable'
metadata = "0x0123456789ABCDEF"
# --- Flow Actions: Output (CONTROLLER)
output_port = "CONTROLLER"
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" IP DSCP (%s)\n"
" IP ECN (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)\n"
" IPv6 Flow Label (%s)\n"
" ICMPv6 Type (%s)\n"
" ICMPv6 Code (%s)\n"
" Metadata (%s)" %
(hex(eth_type), ip_dscp, ip_ecn,
ipv6_src, ipv6_dst, ipv6_flabel,
icmpv6_type, icmpv6_code, metadata))
print (" Action: Output (to %s)" % (output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 26
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_name(flow_name="demo20.py")
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1019)
flow_entry.set_flow_cookie(cookie=250)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=1200)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# IP protocol number (ICMPv6)
# ICMPv6 Type
# ICMPv6 Code
# Metadata
match = Match()
match.set_eth_type(eth_type)
match.set_ip_dscp(ip_dscp)
match.set_ip_ecn(ip_ecn)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ipv6_flabel(ipv6_flabel)
match.set_ip_proto(ip_proto)
match.set_icmpv6_type(icmpv6_type)
match.set_icmpv6_code(icmpv6_code)
match.set_metadata(metadata)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_25():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 25 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
table_id = 0
priority = 500
cookie = 1000
cookie_mask = 255
customer_port = 110
provider_port = 111
qinq_eth_type = ETH_TYPE_STAG # 802.1ad (QinQ) VLAN tagged frame
dot1q_eth_type = ETH_TYPE_CTAG # 802.1q VLAN tagged frame
arp_eth_type = ETH_TYPE_ARP
ip_eth_type = ETH_TYPE_IPv4
provider_vlan_id = 100 # Provider VLAN
customer_vlan_id = 998 # Customer VLAN
first_flow_id = 31
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(arp_eth_type), customer_vlan_id, customer_port))
print(
" Action: Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)" %
(hex(qinq_eth_type), provider_vlan_id, hex(dot1q_eth_type),
customer_vlan_id, provider_port))
time.sleep(rundelay)
flow_id = first_flow_id
flow_entry1 = FlowEntry()
flow_entry1.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=110,arp;" + \
"actions:push-QINQ-tag,mod_vlan=100," + \
"push-DOT1Q-tag,mod_vlan=998,output:111)"
flow_entry1.set_flow_name(flow_name=fname)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_hard_timeout(hard_timeout=600)
flow_entry1.set_flow_idle_timeout(idle_timeout=300)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(provider_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = PushVlanHeaderAction(action_order)
action.set_eth_type(dot1q_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(customer_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, provider_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
match = Match()
match.set_eth_type(arp_eth_type)
match.set_vlan_id(customer_vlan_id)
match.set_in_port(in_port=customer_port)
flow_entry1.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(ip_eth_type), customer_vlan_id, customer_port))
print(
" Action: Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)" %
(hex(qinq_eth_type), provider_vlan_id, hex(dot1q_eth_type),
customer_vlan_id, provider_port))
time.sleep(rundelay)
flow_id += 1
flow_entry2 = FlowEntry()
flow_entry2.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=110,ip;" + \
"actions:push-QINQ-tag,mod_vlan=100,output:111)"
flow_entry2.set_flow_name(flow_name=fname)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_hard_timeout(hard_timeout=600)
flow_entry2.set_flow_idle_timeout(idle_timeout=300)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(provider_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = PushVlanHeaderAction(action_order)
action.set_eth_type(dot1q_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(customer_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, provider_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
match = Match()
match.set_eth_type(ip_eth_type)
match.set_vlan_id(customer_vlan_id)
match.set_in_port(in_port=customer_port)
flow_entry2.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Third flow entry
# ---------------------------------------------------
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(arp_eth_type), provider_vlan_id, provider_port))
print(
" Action: Pop VLAN\n"
" Output (Physical Port number %s)" % (customer_port))
time.sleep(rundelay)
flow_id += 1
flow_entry3 = FlowEntry()
flow_entry3.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=111,arp,vid=100;" + \
"actions:pop-vlan-tag,output=110)"
flow_entry3.set_flow_name(flow_name=fname)
flow_entry3.set_flow_id(flow_id)
flow_entry3.set_flow_hard_timeout(hard_timeout=600)
flow_entry3.set_flow_idle_timeout(idle_timeout=300)
flow_entry3.set_flow_priority(priority)
flow_entry3.set_flow_cookie(cookie)
flow_entry3.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PopVlanHeaderAction(action_order)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, customer_port)
instruction.add_apply_action(action)
flow_entry3.add_instruction(instruction)
match = Match()
match.set_eth_type(arp_eth_type)
match.set_vlan_id(provider_vlan_id)
match.set_in_port(provider_port)
flow_entry3.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry3.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry3)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Fourth flow entry
# ---------------------------------------------------
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(ip_eth_type), provider_vlan_id, provider_port))
print(
" Action: Pop VLAN\n"
" Output (Physical Port number %s)" % (customer_port))
time.sleep(rundelay)
flow_id += 1
flow_entry4 = FlowEntry()
flow_entry4.set_flow_table_id(table_id)
flow_entry4.set_flow_id(flow_id)
fname = "[MLX1-A] Test flow (match:inport=111,ip,vid=100;" + \
"actions:pop-vlan-tag,output=110)"
flow_entry4.set_flow_name(flow_name=fname)
flow_entry4.set_flow_hard_timeout(hard_timeout=600)
flow_entry4.set_flow_idle_timeout(idle_timeout=300)
flow_entry4.set_flow_priority(priority)
flow_entry4.set_flow_cookie(cookie)
flow_entry4.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PopVlanHeaderAction(action_order)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, customer_port)
instruction.add_apply_action(action)
flow_entry4.add_instruction(instruction)
match = Match()
match.set_eth_type(ip_eth_type)
match.set_vlan_id(provider_vlan_id)
match.set_in_port(provider_port)
flow_entry4.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry4.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry4)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print("\n")
print("<<< Get configured flows from the Controller")
time.sleep(rundelay)
for i in range(first_flow_id, flow_id + 1):
result = ofswitch.get_configured_flow(table_id, i)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow '%s' successfully read from the Controller" % i)
print("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print("\n")
print(
"<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName))
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
" Output (Physical Port number %s)" % (hex(qinq_eth_type), provider_vlan_id,
hex(dot1q_eth_type), customer_vlan_id,
provider_port))
time.sleep(rundelay)
flow_id = first_flow_id
flow_entry1 = FlowEntry()
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name = "[MLX1-A] Test flow (match:inport=110,arp;actions:push-QINQ-tag,mod_vlan=100,push-DOT1Q-tag,mod_vlan=998,output:111)")
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_hard_timeout(hard_timeout = 600)
flow_entry1.set_flow_idle_timeout(idle_timeout = 300)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order = 0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(provider_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = PushVlanHeaderAction(action_order)
def of_demo_16():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 16 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
eth_type = ETH_TYPE_IPv6
ipv6_src = "fe80::2acf:e9ff:fe21:6431/128"
ipv6_dst = "aabb:1234:2acf:e9ff::fe21:6431/64"
# --- Flow Actions: Output (CONTROLLER)
output_port = "CONTROLLER"
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)" %
(hex(eth_type), ipv6_src, ipv6_dst))
print(" Action: Output (to %s)" % (output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
fname = "match=ipv6_src,ipv6_dst;actions=output:Controller"
flow_entry.set_flow_name(flow_name=fname)
table_id = 0
flow_id = 23
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1014)
flow_entry.set_flow_cookie(cookie=408)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=3400)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully read from the Controller")
print("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(
"<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully removed from the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_8():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 8 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# Input Port
# NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
eth_type = ETH_TYPE_IPv4
eth_src = "00:1c:01:00:23:aa"
eth_dst = "00:02:02:60:ff:fe"
ipv4_src = "10.0.245.1/24"
ipv4_dst = "192.168.1.123/16"
ip_proto = IP_PROTO_TLSP
ip_dscp = IP_DSCP_CS3 # 'Class Selector' = 'Flash'
input_port = 13
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" IP Protocol Number (%s)\n"
" IP DSCP (%s)\n"
" Input Port (%s)" %
(hex(eth_type), eth_src, eth_dst, ipv4_src, ipv4_dst, ip_proto,
ip_dscp, input_port))
print(" Action: Output (CONTROLLER)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 15
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1006)
flow_entry.set_flow_cookie(cookie=100)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Action: 'Output' to CONTROLLER
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER", max_len=60)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_ipv4_src(ipv4_src)
match.set_ipv4_dst(ipv4_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_in_port(input_port)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully read from the Controller")
print("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(
"<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully removed from the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")