def get_measurement_widget(self, parent):
"""."""
meas_wid = QWidget(parent)
meas_lay = QVBoxLayout(meas_wid)
strt = PyDMPushButton(
meas_wid,
init_channel=self.devpref.substitute(propty="MeasRespMat-Cmd"),
pressValue=ConstTLines.MeasRespMatCmd.Start)
strt.setEnabled(True)
strt.setToolTip('Start Measurement')
strt.setIcon(qta.icon('fa5s.play'))
strt.setObjectName('strt')
strt.setStyleSheet(
'#strt{min-width:25px; max-width:25px; icon-size:20px;}')
stop = PyDMPushButton(
meas_wid,
init_channel=self.devpref.substitute(propty="MeasRespMat-Cmd"),
pressValue=ConstTLines.MeasRespMatCmd.Stop)
stop.setEnabled(True)
stop.setToolTip('Stop Measurement')
stop.setIcon(qta.icon('fa5s.stop'))
stop.setObjectName('stop')
stop.setStyleSheet(
'#stop{min-width:25px; max-width:25px; icon-size:20px;}')
rst = PyDMPushButton(
meas_wid,
init_channel=self.devpref.substitute(propty="MeasRespMat-Cmd"),
pressValue=ConstTLines.MeasRespMatCmd.Reset)
rst.setEnabled(True)
rst.setToolTip('Reset Measurement Status')
rst.setIcon(qta.icon('fa5s.sync'))
rst.setObjectName('conf')
rst.setStyleSheet(
'#conf{min-width:25px; max-width:25px; icon-size:20px;}')
lbl = PyDMLabel(
meas_wid, self.devpref.substitute(propty='MeasRespMat-Mon'))
lbl.setAlignment(Qt.AlignCenter)
hbl = QHBoxLayout()
hbl.setSpacing(8)
meas_lay.addItem(hbl)
hbl.addWidget(strt)
hbl.addWidget(stop)
hbl.addWidget(rst)
hbl.addStretch()
hbl.addWidget(lbl)
fml = QFormLayout()
meas_lay.addSpacing(20)
meas_lay.addItem(fml)
lbl = QLabel('CH [urad]', meas_wid)
wid = self.create_pair(meas_wid, 'MeasRespMatKickCH')
fml.addRow(lbl, wid)
lbl = QLabel('CV [urad]', meas_wid)
wid = self.create_pair(meas_wid, 'MeasRespMatKickCV')
fml.addRow(lbl, wid)
if self.acc in {'SI', 'BO'}:
lbl = QLabel('RF [Hz]', meas_wid)
wid = self.create_pair(meas_wid, 'MeasRespMatKickRF')
fml.addRow(lbl, wid)
lbl = QLabel('Wait [s]', meas_wid)
lbl.setToolTip('Time to wait between kicks')
wid = self.create_pair(meas_wid, 'MeasRespMatWait')
fml.addRow(lbl, wid)
return meas_wid
class InjSysStbyControlWidget(QWidget):
"""Injection System Control Widget."""
expand = Signal()
def __init__(self,
parent=None,
prefix=VACA_PREFIX,
is_summary=False,
handler=None):
"""Init."""
super().__init__(parent)
self.prefix = prefix
self._inj_prefix = SiriusPVName('AS-Glob:AP-InjCtrl').substitute(
prefix=prefix)
self._is_summary = is_summary
self._last_comm = None
self._handler = handler or InjSysStandbyHandler()
self._icon_off = qta.icon('mdi.power-off')
self._icon_on = qta.icon('mdi.power-on')
self._icon_check = qta.icon('fa5s.check')
self._pixmap_check = self._icon_check.pixmap(
self._icon_check.actualSize(QSize(16, 16)))
self._icon_not = qta.icon('fa5s.times')
self._pixmap_not = self._icon_not.pixmap(
self._icon_not.actualSize(QSize(16, 16)))
self.menu = QMenu(self)
self.rstord_act = self.menu.addAction('Reset Commands')
self.rstord_act.triggered.connect(self._reset_commands_order)
if is_summary:
self._setupSummary()
else:
self._setupFull()
self._ch_cmdsts = SiriusConnectionSignal(
self._inj_prefix.substitute(propty='InjSysCmdSts-Mon'))
self._ch_off_order_sp = SiriusConnectionSignal(
self._inj_prefix.substitute(propty='InjSysTurnOffOrder-SP'))
self._ch_off_order_rb = SiriusConnectionSignal(
self._inj_prefix.substitute(propty='InjSysTurnOffOrder-RB'))
self._ch_on_order_sp = SiriusConnectionSignal(
self._inj_prefix.substitute(propty='InjSysTurnOnOrder-SP'))
self._ch_on_order_rb = SiriusConnectionSignal(
self._inj_prefix.substitute(propty='InjSysTurnOnOrder-RB'))
if not is_summary:
self._ch_cmdone = SiriusConnectionSignal(
self._inj_prefix.substitute(propty='InjSysCmdDone-Mon'))
self._ch_cmdsts.new_value_signal[int].connect(
self._handle_cmdsts_buttons_enbl)
self._ch_off_order_rb.new_value_signal[str].connect(
self._handle_buttons_color)
self._ch_on_order_rb.new_value_signal[str].connect(
self._handle_buttons_color)
self._ch_off_order_rb.new_value_signal[str].connect(
self._handle_actions_state)
self._ch_on_order_rb.new_value_signal[str].connect(
self._handle_actions_state)
if not is_summary:
self._ch_cmdone.new_value_signal[str].connect(
self._handle_cmdone_labels)
self._ch_cmdsts.new_value_signal[int].connect(
self._handle_cmdsts_labels)
def _setupSummary(self):
self._pb_off = PyDMPushButton(self,
label='',
icon=self._icon_off,
init_channel=self._inj_prefix.substitute(
propty='InjSysTurnOff-Cmd'),
pressValue=0)
self._pb_off.setObjectName('bt')
self._pb_off.setStyleSheet(
'#bt{min-width:25px; max-width:25px; icon-size:20px;}')
self._pb_on = PyDMPushButton(self,
label='',
icon=self._icon_on,
init_channel=self._inj_prefix.substitute(
propty='InjSysTurnOn-Cmd'),
pressValue=0)
self._pb_on.setObjectName('bt')
self._pb_on.setStyleSheet(
'#bt{min-width:25px; max-width:25px; icon-size:20px;}')
self._led_sts = InjSysStbyLed(self)
self._led_sts.setStyleSheet(
'QLed{min-width:1.29em; max-width:1.29em;}')
lay = QGridLayout(self)
lay.setAlignment(Qt.AlignCenter)
lay.addWidget(self._pb_off, 0, 0)
lay.addWidget(self._pb_on, 0, 1)
lay.addWidget(self._led_sts, 1, 0, 1, 2, alignment=Qt.AlignCenter)
# menu
for cmmtype in ['on', 'off']:
order = getattr(self._handler, cmmtype + '_order')
menu = QMenu('Select Turn ' + cmmtype.upper() + ' Commands', self)
setattr(self, cmmtype + '_menu', menu)
self.menu.addMenu(menu)
for cmm in order:
act = menu.addAction(self._handler.HANDLER_DESC[cmm])
act.setObjectName(cmm)
act.setCheckable(True)
def _setupFull(self):
lay = QGridLayout(self)
lay.addWidget(QLabel('Off', self, alignment=Qt.AlignCenter), 0, 1)
lay.addWidget(QLabel('On', self, alignment=Qt.AlignCenter), 0, 2)
lay.addWidget(QLabel('Status', self, alignment=Qt.AlignCenter), 0, 3)
self._checkbox_off = dict()
self._checkbox_on = dict()
self._labels_sts = dict()
for idx, name in enumerate(self._handler.DEF_ON_ORDER):
cb_off = QCheckBox(self)
cb_off.setObjectName(name)
self._checkbox_off[name] = cb_off
cb_on = QCheckBox(self)
cb_on.setObjectName(name)
self._checkbox_on[name] = cb_on
desc = self._handler.HANDLER_DESC[name]
splitd = desc.split('(')
lbl_txt = splitd[0]
tip = ''
if len(splitd) > 1:
lbl_txt, tip = splitd
lb_dsc = QLabel(lbl_txt, self, alignment=Qt.AlignLeft)
if tip:
lb_dsc.setToolTip(tip[:-1])
lb_sts = QLabel('', self, alignment=Qt.AlignCenter)
lb_sts.setObjectName(name)
self._labels_sts[name] = lb_sts
lay.addWidget(lb_dsc, idx + 1, 0)
lay.addWidget(cb_off, idx + 1, 1, alignment=Qt.AlignCenter)
lay.addWidget(cb_on, idx + 1, 2, alignment=Qt.AlignCenter)
lay.addWidget(lb_sts, idx + 1, 3)
self._pb_off = PyDMPushButton(self,
label='',
icon=self._icon_off,
init_channel=self._inj_prefix.substitute(
propty='InjSysTurnOff-Cmd'),
pressValue=0)
self._pb_off.setObjectName('bt')
self._pb_off.setStyleSheet(
'#bt{min-width:25px; max-width:25px; icon-size:20px;}')
self._pb_on = PyDMPushButton(self,
label='',
icon=self._icon_on,
init_channel=self._inj_prefix.substitute(
propty='InjSysTurnOn-Cmd'),
pressValue=0)
self._pb_on.setObjectName('bt')
self._pb_on.setStyleSheet(
'#bt{min-width:25px; max-width:25px; icon-size:20px;}')
self._led_sts = InjSysStbyLed(self)
lay.addWidget(self._pb_off, 6, 1)
lay.addWidget(self._pb_on, 6, 2)
lay.addWidget(self._led_sts, 6, 3)
@Slot(int)
def _handle_cmdsts_buttons_enbl(self, new_sts):
if new_sts == _Const.InjSysCmdSts.On:
self._pb_on.setEnabled(False)
self._pb_on.setIcon(
qta.icon('fa5s.spinner', animation=qta.Spin(self._pb_on)))
self._pb_off.setEnabled(False)
elif new_sts == _Const.InjSysCmdSts.Off:
self._pb_on.setEnabled(False)
self._pb_off.setEnabled(False)
self._pb_off.setIcon(
qta.icon('fa5s.spinner', animation=qta.Spin(self._pb_off)))
else:
if not self._pb_on.isEnabled():
self._pb_on.setEnabled(True)
self._pb_off.setEnabled(True)
self._pb_on.setIcon(self._icon_on)
self._pb_off.setIcon(self._icon_off)
@Slot(str)
def _handle_cmdone_labels(self, new_done):
for name in self._handler.DEF_ON_ORDER:
lbl = self._labels_sts[name]
if name in new_done:
lbl.setPixmap(self._pixmap_check)
elif self._ch_cmdsts.value == _Const.InjSysCmdSts.Idle:
lbl.setPixmap(self._pixmap_not)
@Slot(int)
def _handle_cmdsts_labels(self, new_sts):
if new_sts == _Const.InjSysCmdSts.On:
self._last_comm = new_sts
for name in self._handler.DEF_ON_ORDER:
if self._ch_on_order_rb.value is None:
break
lbl = self._labels_sts[name]
if name in self._ch_on_order_rb.value:
icon = qta.icon('fa5s.spinner')
pixmap = icon.pixmap(icon.actualSize(QSize(16, 16)))
lbl.setPixmap(pixmap)
else:
lbl.setPixmap(QPixmap())
elif new_sts == _Const.InjSysCmdSts.Off:
self._last_comm = new_sts
for name in self._handler.DEF_OFF_ORDER:
if self._ch_off_order_rb.value is None:
break
lbl = self._labels_sts[name]
if name in self._ch_off_order_rb.value:
icon = qta.icon('fa5s.spinner')
pixmap = icon.pixmap(icon.actualSize(QSize(16, 16)))
lbl.setPixmap(pixmap)
else:
lbl.setPixmap(QPixmap())
else:
done = self._ch_cmdone.value
for name in self._handler.DEF_ON_ORDER:
if done is None or name in done:
continue
lbl = self._labels_sts[name]
if self._last_comm == _Const.InjSysCmdSts.On and \
name in self._ch_on_order_rb.value:
lbl.setPixmap(self._pixmap_not)
elif self._last_comm == _Const.InjSysCmdSts.Off and \
name in self._ch_off_order_rb.value:
lbl.setPixmap(self._pixmap_not)
self._last_comm = None
@Slot()
def _set_commands_order(self):
if self._is_summary:
if self.sender() in self.on_menu.actions():
on_order = [
a.objectName() for a in self.on_menu.actions()
if a.isChecked()
]
self._ch_on_order_sp.send_value_signal[str].emit(
','.join(on_order))
elif self.sender() in self.off_menu.actions():
off_order = [
a.objectName() for a in self.off_menu.actions()
if a.isChecked()
]
self._ch_off_order_sp.send_value_signal[str].emit(
','.join(off_order))
else:
if self.sender() in self._checkbox_on.values():
checked = [
w.objectName() for w in self._checkbox_on.values()
if w.isChecked()
]
on_order = [
h for h in self._handler.DEF_ON_ORDER if h in checked
]
self._ch_on_order_sp.send_value_signal[str].emit(
','.join(on_order))
elif self.sender() in self._checkbox_off.values():
checked = [
w.objectName() for w in self._checkbox_off.values()
if w.isChecked()
]
off_order = [
h for h in self._handler.DEF_OFF_ORDER if h in checked
]
self._ch_off_order_sp.send_value_signal[str].emit(
','.join(off_order))
@Slot()
def _reset_commands_order(self):
self._ch_off_order_sp.send_value_signal[str].emit(','.join(
self._handler.DEF_OFF_ORDER))
self._ch_on_order_sp.send_value_signal[str].emit(','.join(
self._handler.DEF_ON_ORDER))
if self._is_summary:
for menu in [self.off_menu, self.on_menu]:
for act in menu.actions():
act.toggled.disconnect()
act.setChecked(True)
act.toggled.connect(self._set_commands_order)
else:
for group in [self._checkbox_off, self._checkbox_on]:
for wid in group.values():
wid.toggled.disconnect()
wid.setChecked(True)
wid.toggled.connect(self._set_commands_order)
@Slot()
def _handle_buttons_color(self):
off_color = 'yellow' if self._ch_off_order_rb.value != \
','.join(self._handler.DEF_OFF_ORDER) else 'white'
self._pb_off.setStyleSheet(
'#bt{min-width:25px; max-width:25px; icon-size:20px;'
'background-color: ' + off_color + ';}')
on_color = 'yellow' if self._ch_on_order_rb.value != \
','.join(self._handler.DEF_ON_ORDER) else 'white'
self._pb_on.setStyleSheet(
'#bt{min-width:25px; max-width:25px; icon-size:20px;'
'background-color: ' + on_color + ';}')
@Slot(str)
def _handle_actions_state(self, sts):
state = 'on' if 'On' in self.sender().address else 'off'
channel = getattr(self, '_ch_' + state + '_order_rb')
if channel.value is None:
return
if self._is_summary:
group = getattr(self, state + '_menu').actions()
else:
group = getattr(self, '_checkbox_' + state).values()
for obj in group:
obj.disconnect()
ost = obj.objectName() in sts
obj.setChecked(ost)
obj.toggled.connect(self._set_commands_order)
def contextMenuEvent(self, event):
"""Show a custom context menu."""
self.menu.popup(self.mapToGlobal(event.pos()))
class DataWriter(PyDMFrame):
def __init__(self, parent=None, init_channel=None):
PyDMFrame.__init__(self, parent, init_channel)
self._node = None
def connection_changed(self, connected):
build = (self._node is None) and (self._connected != connected
and connected is True)
super(DataWriter, self).connection_changed(connected)
if not build:
return
self._node = nodeFromAddress(self.channel)
self._path = self.channel
vb = QVBoxLayout()
self.setLayout(vb)
gb = QGroupBox('Data File Control ({}) '.format(self._node.name))
vb.addWidget(gb)
vb = QVBoxLayout()
gb.setLayout(vb)
fl = QFormLayout()
fl.setRowWrapPolicy(QFormLayout.DontWrapRows)
fl.setFormAlignment(Qt.AlignHCenter | Qt.AlignTop)
fl.setLabelAlignment(Qt.AlignRight)
vb.addLayout(fl)
self._dataFile = PyRogueLineEdit(parent=None,
init_channel=self._path + '.DataFile')
self._dataFile.alarmSensitiveContent = False
self._dataFile.alarmSensitiveBorder = True
fl.addRow('Data File:', self._dataFile)
hb = QHBoxLayout()
vb.addLayout(hb)
self._browsebutton = QPushButton('Browse')
self._browsebutton.clicked.connect(self._browse)
hb.addWidget(self._browsebutton)
self._autonamebutton = PyDMPushButton(label='Auto Name',
pressValue=1,
init_channel=self._path +
'.AutoName')
hb.addWidget(self._autonamebutton)
self._openbutton = PyDMPushButton(label='Open',
pressValue=1,
init_channel=self._path + '.Open')
self._openbutton.clicked.connect(self._openDataFile)
hb.addWidget(self._openbutton)
self._closebutton = PyDMPushButton(label='Close',
pressValue=1,
init_channel=self._path + '.Close')
self._closebutton.check_enable_state = lambda: None
self._closebutton.clicked.connect(self._closeDataFile)
self._closebutton.setEnabled(False)
hb.addWidget(self._closebutton)
hb = QHBoxLayout()
vb.addLayout(hb)
vbl = QVBoxLayout()
hb.addLayout(vbl)
fl = QFormLayout()
fl.setRowWrapPolicy(QFormLayout.DontWrapRows)
fl.setFormAlignment(Qt.AlignHCenter | Qt.AlignTop)
fl.setLabelAlignment(Qt.AlignRight)
vbl.addLayout(fl)
w = PyRogueLineEdit(parent=None,
init_channel=self._path + '.BufferSize')
w.alarmSensitiveContent = False
w.alarmSensitiveBorder = True
fl.addRow('Buffer Size:', w)
w = PyDMLabel(parent=None, init_channel=self._path + '.IsOpen/disp')
w.alarmSensitiveContent = False
w.alarmSensitiveBorder = True
fl.addRow('File Open:', w)
w = PyDMLabel(parent=None, init_channel=self._path + '.CurrentSize')
w.alarmSensitiveContent = False
w.alarmSensitiveBorder = True
fl.addRow('Current File Size:', w)
vbr = QVBoxLayout()
hb.addLayout(vbr)
fl = QFormLayout()
fl.setRowWrapPolicy(QFormLayout.DontWrapRows)
fl.setFormAlignment(Qt.AlignHCenter | Qt.AlignTop)
fl.setLabelAlignment(Qt.AlignRight)
vbr.addLayout(fl)
w = PyRogueLineEdit(parent=None,
init_channel=self._path + '.MaxFileSize')
w.alarmSensitiveContent = False
w.alarmSensitiveBorder = True
fl.addRow('Max Size:', w)
w = PyDMLabel(parent=None, init_channel=self._path + '.FrameCount')
w.alarmSensitiveContent = False
w.alarmSensitiveBorder = True
fl.addRow('Frame Count:', w)
w = PyDMLabel(parent=None, init_channel=self._path + '.TotalSize')
w.alarmSensitiveContent = False
w.alarmSensitiveBorder = True
fl.addRow('Total File Size:', w)
@Slot()
def _closeDataFile(self):
self._dataFile.setEnabled(True)
self._browsebutton.setEnabled(True)
self._openbutton.setEnabled(True)
self._autonamebutton.setEnabled(True)
self._closebutton.setEnabled(False)
@Slot()
def _openDataFile(self):
self._dataFile.setEnabled(False)
self._browsebutton.setEnabled(False)
self._openbutton.setEnabled(False)
self._autonamebutton.setEnabled(False)
self._closebutton.setEnabled(True)
@Slot()
def _browse(self):
dlg = QFileDialog()
sug = datetime.datetime.now().strftime("data_%Y%m%d_%H%M%S.dat")
dataFile = dlg.getSaveFileName(
options=QFileDialog.DontConfirmOverwrite,
directory=sug,
caption='Select data file',
filter='Data Files(*.dat);;All Files(*.*)')
# Detect QT5 return
if isinstance(dataFile, tuple):
dataFile = dataFile[0]
if dataFile != '':
self._dataFile.setText(dataFile)
self._dataFile.send_value()
