class TestCalc:
def setup_class(self):
self.cal = Calculator()
@pytest.mark.parametrize(
['a', 'b', 'result'],
yaml.safe_load(open("./data.yaml"))['add'],
ids=['int', 'big num', 'xiaoshu', 'fushu', 'xiaoshu1'])
def test_add(self, a, b, result):
assert Decimal(result) == self.cal.add(a, b)
@pytest.mark.parametrize(['a', 'b', 'result'],
yaml.safe_load(open('./data.yaml'))['sub'],
ids=['int', 'big num', 'xiaoshu', 'fushu'])
def test_sub(self, a, b, result):
assert Decimal(result) == self.cal.sub(a, b)
@pytest.mark.parametrize(['a', 'b', 'result'],
yaml.safe_load(open('./data.yaml'))['mul'],
ids=['int', 'big num', 'xiaoshu', 'fushu'])
def test_mul(self, a, b, result):
assert Decimal(result) == self.cal.mul(a, b)
@pytest.mark.parametrize(['a', 'b', 'result'],
yaml.safe_load(open('./data.yaml'))['div'],
ids=['int', 'big num', 'xiaoshu', 'fushu'])
def test_div(self, a, b, result):
assert Decimal(result) == self.cal.div(a, b)
class CheckCalc():
def setup(self):
self.cal = Calculator()
# 加法
@pytest.mark.first
@pytest.mark.dependency()
@pytest.mark.parametrize("a,b,result", adddatas, ids=addids)
def check_add(self, a, b, result):
print(f"\n计算数据：a={a},b={b},result={result}")
assert self.cal.add(a, b) == result
#除法
@pytest.mark.last
@pytest.mark.dependency(depends=["test_mul"])
@pytest.mark.parametrize("a,b,result", divdatas, ids=divids)
def check_div(self, a, b, result):
print(f"\n计算数据：a={a},b={b},result={result}")
assert self.cal.div(a, b) == result
# 减法
@pytest.mark.second
@pytest.mark.dependency(depends=["test_add"])
@pytest.mark.parametrize("a,b,result", subdatas, ids=subids)
def check_sub(self, a, b, result):
print(f"\n计算数据：a={a},b={b},result={result}")
assert self.cal.sub(a, b) == result
#乘法
@pytest.mark.third
@pytest.mark.dependency()
@pytest.mark.parametrize("a,b,result", muldatas, ids=mulids)
def check_mul(self, a, b, result):
print(f"\n计算数据：a={a},b={b},result={result}")
assert self.cal.mul(a, b) == result
class TestCalc1():
def setup(self):
self.cal = Calculator()
@pytest.mark.add
@pytest.mark.parametrize(('a', 'b', 'result'),
yaml.safe_load(open(r'../datas/calc.yml'))['add'])
def test_add(self, a, b, result, open1):
print(f"计算数据： a={a}, b={b}, result={result}")
assert self.cal.add(a, b) == result
@pytest.mark.div
@pytest.mark.parametrize(('a', 'b', 'result'),
yaml.safe_load(open(r'../datas/calc.yml'))['div'])
def test_div(self, a, b, result, open1):
print(f"计算数据： a={a}, b={b}, result={result}")
assert self.cal.div(a, b) == result
@pytest.mark.mul
@pytest.mark.parametrize(('a', 'b', 'result'),
yaml.safe_load(open(r'../datas/calc.yml'))['mul'])
def test_mul(self, a, b, result, open1):
print(f"计算数据： a={a}, b={b}, result={result}")
assert self.cal.mul(a, b) == result
@pytest.mark.sub
@pytest.mark.parametrize(('a', 'b', 'result'),
yaml.safe_load(open(r'../datas/calc.yml'))['sub'])
def test_sub(self, a, b, result, open1):
print(f"计算数据： a={a}, b={b}, result={result}")
assert self.cal.sub(a, b) == result
class TestCalc:
# 类级别 setup和teardown
def setup_class(self):
self.cal = Calculator()
print("类级别 setup")
def teardown_class(self):
print("类级别 teardown")
# 类里面的setup和teardown，运行在方法调用的前和后
# 每条类里面的测试用例前后分别执行 setup和teardown
def setup(self):
print("setup")
def teardown(self):
print("teardown")
@pytest.mark.add
@pytest.mark.parametrize('a,b,result', [(1, 1, 2), (2, 2, 4),
(100, 100, 200), (0.1, 0.1, 0.2),
(-1, -1, -2)],
ids=["int", "int1", "bignun", "float", "fushu"])
def test_add(self, a, b, result):
# cal = Calculator()
assert result == self.cal.add(a, b)
@pytest.mark.add
def test_add1(self):
# cal = Calculator()
assert 3 == self.cal.add(1, 2)
@pytest.mark.div
def test_div(self):
# cal = Calculator()
assert 1 == self.cal.div(1, 1)
def test_sub(self,a,b,c):
"""
减法测试用例
:param a:
:param b:
:param c:
:return:
"""
cal = Calculator()
print(f'\na,b,c的值:{a} - {b} = {c}')
assert cal.sub(a,b) == c
def test_add(self,a,b,c):
"""
加法测试用例
:param a:
:param b:
:param c:
:return:
"""
cal = Calculator()
print(f'\na,b,c的值:{a} + {b} = {c}')
assert cal.add(a,b) == c
class TestCalc:
def setup_class(self):
self.cal = Calculator()
@pytest.mark.run(order=2)
@pytest.mark.dependency(name="add")
# @pytest.mark.xfail(reason="deliberate fail")
@pytest.mark.parametrize('read', c, ids=ids_add, indirect=True)
def check_add(self, read):
print(f"计算：{read[0]} + {read[1]}，预期结果为：{read[2]}")
try:
temp_result = self.cal.add(read[0], read[1])
assert temp_result == read[2]
except Exception as e:
print(e)
assert False
@pytest.mark.run(order=3)
@pytest.mark.dependency(depends=["add"])
@pytest.mark.parametrize('read', c, ids=ids_sub, indirect=True)
def check_sub(self, read):
print(f"计算：{read[0]} - {read[1]}，预期结果为：{read[3]}")
try:
temp_result = self.cal.sub(read[0], read[1])
assert temp_result == read[3]
except Exception as e:
print(e)
assert False
@pytest.mark.run(order=4)
@pytest.mark.dependency(name="mul")
@pytest.mark.parametrize('read', c, ids=ids_mul, indirect=True)
def check_mul(self, read):
print(f"计算：{read[0]} * {read[1]}，预期结果为：{read[4]}")
try:
temp_result = self.cal.mul(read[0], read[1])
assert temp_result == read[4]
except Exception as e:
print(e)
assert False
@pytest.mark.run(order=5)
@pytest.mark.dependency(depends=["mul"])
@pytest.mark.parametrize('read', c, ids=ids_div, indirect=True)
def check_div(self, read):
print(f"计算：{read[0]} ÷ {read[1]}，预期结果为：{read[5]}")
try:
temp_result = self.cal.div(read[0], read[1])
assert temp_result == read[5]
except Exception as e:
print(e)
assert False
def test_mul(self,a,b,c):
"""
乘法测试用例
((Decimal(a) * Decimal(b)).quantize(Decimal('0.00'))
:param a:
:param b:
:param c:
:return:
"""
import decimal
cal = Calculator()
print(f'\na,b,c的值:{a} * {b} = {c}')
assert cal.mul(a,b) == c
class TestCalc:
# setup_class， teardown_class每个类里面 执行前后分别 执行
def setup_class(self):
self.cal = Calculator()
print("类级别 setup")
def teardown_class(self):
print("类级别 teardown")
# 函数级别 每条类里面的测试用例前和后分别 执行setup teardown
def setup(self):
print("setup")
def teardown(self):
print("teardown")
@pytest.mark.parametrize('a, b, result', adddatas, ids=addids)
# @pytest.mark.add
def test_add(self, a, b, result):
steps(a, b, result)
# cal = Calculator()
# assert result == self.cal.add(a, b)
# assert result == self.cal.add1(a, b)
# assert result == self.cal.add2(a, b)
# @pytest.mark.add
def test_add1(self):
# cal = Calculator()
assert 3 == self.cal.add(1, 2)
# @pytest.mark.div
@pytest.mark.parametrize('a,b,c', divdatas, ids=divids)
def test_div(self, a, b, c):
# cal = Calculator()
print("登录操作111")
assert c == self.cal.div(a, b)
print("登录操作222")
assert 1 == self.cal.div(2, 1)
print("登录操作333")
assert 1 == self.cal.div(2, 1)
def test_assume(self):
print("登录操作")
pytest.assume(1 == 2)
print("搜索操作")
pytest.assume(2 == 2)
print("加购操作")
pytest.assume(3 == 2)
class TestCalc:
# 定义setup_class()方法
def setup_class(self):
print("开始计算")
# 实例化计算器
self.calc = Calculator()
# 定义teardown_class()方法
def teardowm_class(self):
print("结束计算")
# 定义setup()方法
def setup(self):
print("要灵活使用")
# 定义teardown()方法
def teardowm(self):
print("灵活使用结束")
# 装饰器参数化 加法标记
@pytest.mark.add
@pytest.mark.parametrize('a,b,expect',[
(1,1,2),
(100,100,200),
(0.1,0.1,0.2),
(-1,-1,-2),
],ids=['int','bigint','float','minus'])
# 定义一个test_add1()方法
def test_add(self,a,b,expect):
# 调用它的相加add()方法
result=self.calc.add(a,b)
# 判断result为小数的时候使用round取小数点后两位
if isinstance(result,float):
result=round(result,2)
# 断言
assert expect == result
# 装饰器 yaml文件传入参数化
@pytest.mark.div
@pytest.mark.parametrize('a ,b,hope',mydatas,ids=myid)
# 定义除法测试方法，传入参数和希望值
def test_div(self,a,b,hope):
# 除法结果
result=self.calc.div(a,b)
# 断言希望值是否等于除法结果
assert hope == result
class TestCalc:
cal = Calculator()
@pytest.mark.parametrize('a,b,result', divdatas, ids=divids)
@pytest.mark.run(order=3)
@pytest.mark.dependency(depends=['test_mult'])
def test_div(self, a, b, result):
if b == 0:
print("除数不能为0")
return 0
else:
assert result == self.cal.div(a, b)
@pytest.mark.parametrize('a,b,result', adddatas, ids=addids)
@pytest.mark.run(order=0)
@pytest.mark.dependency(name='test_add')
def test_add(self, a, b, result):
assert result == self.cal.add(a, b)
@pytest.mark.parametrize('a,b,result', minusdatas, ids=minusids)
@pytest.mark.run(order=1)
@pytest.mark.dependency(depends=['test_add'])
def test_minus(self, a, b, result):
assert result == self.cal.minus(a, b)
@pytest.mark.parametrize('a,b,result', multdatas, ids=multids)
@pytest.mark.run(order=2)
@pytest.mark.dependency(name='test_mult')
def test_mult(self, a, b, result):
assert result == self.cal.mult(a, b)
class Testcalc:
def setup_class(self):
self.calc = Calculator()
print("开始计算")
def teardown_class(self):
print("计算结束")
@pytest.mark.parametrize('a,b,expect', adddatas, ids=myid)
def test_add(self, a, b, expect):
result = self.calc.add(a, b)
assert expect == result
@pytest.mark.parametrize('a,b,expect', divdatas, ids=myid1)
def test_div(self, a, b, expect):
result = self.calc.div(a, b)
assert expect == result
class TestCalc:
# setup_class,teardown_class 类级别每个类里面执行前后分别执行
def setup_class(self):
self.cal = Calculator()
print('类级别setup')
def teardown_class(self):
print('类级别teardown')
# 方法级别，每个方法里面的测试用例前后分别执行setup、teardown
def setup(self):
# self.cal = Calculator()
print('setup')
def teardown(self):
print('teardown')
# 方法级别，每个方法里面的测试用例前后分别执行setup、teardown
def setup_method(self):
# self.cal = Calculator()
print('方法级别setup')
def teardown_method(self):
print('方法级别teardown')
@pytest.mark.add
@pytest.mark.parametrize('a,b,result', [(1, 1, 3), (2, 2, 4),
(100, 100, 200), (0.1, 0.1, 0.2),
(-1, -1, -2)],
ids=['int', 'int', 'bignum', 'float',
'负数']) # 参数化
def test_add(self, a, b, result):
# cal = Calculator()
assert result == self.cal.add(a, b)
# @pytest.mark.add
# @pytest.mark.parametrize('a,b,result', mydatas, ids=myids)
# def test_add1(self,a,b,result):
# # cal = Calculator()
# assert result == self.cal.add(a, b)
@pytest.mark.div
def test_div(self):
# cal = Calculator()
assert 1 == self.cal.div(1, 1)
class TestCalc():
def setup_class(self):
self.cal = Calculator()
def teardown_class(self):
pass
# @pytest.mark.parametrize("a, b, result",[
# (1,1,2),
# (-1,-1,-2),
# (-1,1,0)
# ],)
@pytest.mark.run(order=1)
@pytest.mark.parametrize(('a,b,result'), add_datas, ids=adds)
@pytest.mark.add
def test_add(self, a, b, result):
assert result == self.cal.add(a, b)
# 插件pytest-dependency 控制用例依赖关系
'''
如果test_add用例成功，test_cut会被执行
如果test_add用例失败，test_cut会被跳过不被执行
depends = [] 列表中加入依赖得到用例名称
'''
# 插件pytest-ordering控制用例执行顺序
@pytest.mark.run(order=2)
@pytest.mark.dependency(depends=['test_add'], name='test_cut')
@pytest.mark.parametrize('a,b,result', cut_datas, ids=cuts)
@pytest.mark.cut
def test_cut(self, a, b, result):
assert result == self.cal.cut(a, b)
@pytest.mark.run(order=3)
@pytest.mark.parametrize('a,b,result', mult_datas, ids=mults)
@pytest.mark.mult
def test_mult(self, a, b, result):
assert result == self.cal.mult(a, b)
@pytest.mark.run(order=4)
@pytest.mark.dependency(depends=['test_mult'], name='test_div')
@pytest.mark.parametrize('a,b,result', div_datas, ids=divs)
@pytest.mark.div
def test_div(self, a, b, result):
assert result == self.cal.div(a, b)
def test_div(self,a,b,c):
"""
除法测试用例
:param a:
:param b:
:param c:
:return:
"""
with allure.step("实例化"):
cal = Calculator()
with allure.step("判断除数是否为0"):
if b != 0:
print(f'\na,b,c的值:{a} / {b} = {c}')
assert cal.div(a,b) == c
else:
allure.attach("<body>这是一段html body块</body>", "html测试块", attachment_type=allure.attachment_type.HTML)
allure.attach.file("../report/photo/a.jpg", name="这是图片", attachment_type=allure.attachment_type.JPG)
allure.attach("除数不能为0！", attachment_type=allure.attachment_type.TEXT)
print("除数不能为0！")
class TestCalc():
def setup_class(self):
print("开始计算")
# 实例化计算器
self.calc = Calculator()
def teardown_class(self):
print("结束计算")
@pytest.mark.add
def test_fun(self):
# # 实例化计算器
# calc = Calculator()
# 调用它的相加方法
result = self.calc.add(1, 1)
# 断言
assert 2 == result
@pytest.mark.add
@pytest.mark.parametrize("a,b,expect", adddatas, ids=myid)
def test_add(self, a, b, expect):
# # 实例化计算器
# calc = Calculator()
# 调用它的相加方法
result = self.calc.add(a, b)
# 如果结果是浮点数,四舍五入取两位
if isinstance(result, float):
result = round(result, 2)
# 断言
assert expect == result
@pytest.mark.add
def test_add1(self):
# # 实例化计算器
# calc = Calculator()
# 调用它的相加方法
result = self.calc.add(100, 100)
# 断言
assert 200 == result
@pytest.mark.add
def test_add2(self):
# # 实例化计算器
# calc = Calculator()
# 调用它的相加方法
result = self.calc.add(-1, -1)
# 断言
assert -2 == result
@pytest.mark.div
def test_div(self):
# calc = Calculator()
result = self.calc.div(1, 1)
assert 1 == result
@pytest.mark.div
def test_div1(self):
# calc = Calculator()
result = self.calc.div(-1, 1)
assert -1 == result
class TestCalc:
def setup_method(self):
self.cal = Calculator()
print("setup_method")
@pytest.mark.parametrize(("a", "b", "result"), [(1, 2, 3), (-1, 2, 1),
(-1, -2, 3), (0, 0, 0),
(0.5, 3, 3.5)])
@pytest.mark.add
def test_add(self, a, b, result, open):
#cal = Calculator()
assert self.cal.add(a, b) == result
@pytest.mark.parametrize(("a", "b", "result"), [(1, 2, 3), (-1, 2, 1),
(-1, -2, 3), (0, 0, 0),
(0.5, 3, 3.5), (1, 0, 0),
(0, 1, 0)])
@pytest.mark.div
def test_div(self, a, b, result, open):
cal = Calculator()
assert self.cal.div(a, b) == result
@pytest.mark.parametrize(("a", "b", "result"), [(1, 2, 3), (-1, 2, 1),
(-1, -2, 3), (0, 0, 0),
(0.5, 3, 3.5), (1, 0, 0),
(0, 1, 0)])
@pytest.mark.subtraction
def test_subtraction(self, a, b, result, open):
#cal = Calculator()
assert self.cal.subtraction(a, b) == result
@pytest.mark.parametrize(("a", "b", "result"), [(1, 2, 3), (-1, 2, 1),
(-1, -2, 3), (0, 0, 0),
(0.5, 3, 3.5), (1, 0, 0),
(0, 1, 0)])
@pytest.mark.multiplication
def test_multiplication(self, a, b, result, open):
assert self.cal.multiplication(a, b) == result
class TestCalc:
# 类里面执行
def setup_class(self):
print("类级别setup")
self.calc = Calculator()
def teardown_class(self):
print("类级别teardown")
@pytest.mark.parametrize('list1',
yaml.safe_load(open('./../calc.yml'))['add'])
def test_add(self, list1, calc):
add_result = self.calc.add(list1[0], list1[1])
print(f'实际结果为：{add_result}, 类型为{type(add_result)}')
assert Decimal(list1[2]).quantize(Decimal('0.00')) == add_result
@pytest.mark.parametrize('list1',
yaml.safe_load(open('./../calc.yml'))['div'])
def test_div(self, list1, calc):
assert Decimal(list1[2]).quantize(Decimal('0.00')) == self.calc.div(
list1[0], list1[1])
@pytest.mark.parametrize('list1',
yaml.safe_load(open('./../calc.yml'))['decrease'])
def test_decrease(self, list1, calc):
assert Decimal(list1[2]).quantize(
Decimal('0.00')) == self.calc.decrease(list1[0], list1[1])
@pytest.mark.parametrize('list1',
yaml.safe_load(
open('./../calc.yml'))['multiplication'])
def test_multiplication(self, list1, calc):
print(list1)
assert Decimal(list1[2]).quantize(
Decimal('0.00')) == self.calc.multiplication(list1[0], list1[1])
class TestCal:
def setup(self):
self.cal = Calculator()
print("初始化一个计算机对象")
def teardown(self):
print("结束")
@pytest.mark.add
@pytest.mark.parametrize('a,b,result', [(1, 1, 2), (0.2, 0.2, 0.4)],
ids=['int', 'float']) #给用例命名
def test_add01(self, a, b, result):
# cal = Calculator()
assert result == self.cal.add(a, b)
@pytest.mark.add
def test_add02(self):
# cal = Calculator()
assert 4 == self.cal.add(2, 2)
@pytest.mark.div
def test_div(self):
# cal = Calculator()
assert 1 == self.cal.div(2, 2)
class CheckCalc():
def setup(self):
self.cal = Calculator()
@pytest.mark.parametrize("a,b,result", adddatas, ids=addids)
def check_add(self, a, b, result):
print(f"\n计算数据：a={a},b={b},result={result}")
assert self.cal.add(a, b) == result
@pytest.mark.parametrize("a,b,result", divdatas, ids=divids)
def check_div(self, a, b, result):
print(f"\n计算数据：a={a},b={b},result={result}")
assert self.cal.div(a, b) == result
@pytest.mark.parametrize("a,b,result", subdatas, ids=subids)
def check_sub(self, a, b, result):
print(f"\n计算数据：a={a},b={b},result={result}")
assert self.cal.sub(a, b) == result
@pytest.mark.parametrize("a,b,result", muldatas, ids=mulids)
def check_mul(self, a, b, result):
print(f"\n计算数据：a={a},b={b},result={result}")
assert self.cal.mul(a, b) == result
class TestCalculator():
cal = Calculator()
def test_add(self):
assert 2 == self.cal.add(1, 1)
def test_power(self):
assert 4 == self.cal.power(2)
def test_sqrt(self):
assert 3 == self.cal.sqrt(9)
def test_mod(self):
assert 2 == self.cal.mod(10, 4)
def test_divisibility(self):
assert 2 == self.cal.divisibility(7, 3)
class TestCalc:
# setup_class， teardown_class每个类里面 执行前后分别 执行
def setup_class(self):
self.cal = Calculator()
print("类级别 setup")
def teardown_class(self):
print("类级别 teardown")
# 函数级别 每条类里面的测试用例前和后分别 执行setup teardown
def setup(self):
print("setup")
def teardown(self):
print("teardown")
@pytest.mark.parametrize('a, b, result', [
(1, 1, 3),
(2, 2, 4),
(100, 100, 200),
(0.1, 0.1, 0.2),
(-1, -1, -2)
]
, ids=['int', 'int', 'bignum', 'float', 'fushu'])
# @pytest.mark.add
def test_add(self, a, b, result):
# cal = Calculator()
assert result == self.cal.add(a, b)
assert result == self.cal.add(a, b)
assert result == self.cal.add(a, b)
# @pytest.mark.add
def test_add1(self):
# cal = Calculator()
assert 3 == self.cal.add(1, 2)
# @pytest.mark.div
def test_div(self):
# cal = Calculator()
print("登录操作111")
assert 1 == self.cal.div(2, 1)
print("登录操作222")
assert 1 == self.cal.div(2, 1)
print("登录操作333")
assert 1 == self.cal.div(2, 1)
def test_assume(self):
print("登录操作")
pytest.assume(1 == 2)
print("搜索操作")
pytest.assume(2 == 2)
print("加购操作")
pytest.assume(3 == 2)
#!/usr/bin/env python
# -*- coding:utf-8 -*-
import pytest
import yaml
from pythoncode.calc import Calculator
cal = Calculator()
def get_testDatas():
with open(file="./datas/testDatas.yaml", mode="r") as f:
testDatas = yaml.safe_load(f)
print(type(testDatas))
print(testDatas)
return testDatas
def get_steps():
with open(file="./datas/steps.yaml", mode="r") as f:
add_datas = []
div_datas = []
stepDatas = yaml.safe_load(f)
testDatas = get_testDatas()
for step in stepDatas:
if step == "add":
for key in testDatas.keys():
if key[:3] == step:
add_datas.append(testDatas[key])
elif step == "div":
for key in testDatas.keys():
def setup_method(self):
self.cal = Calculator()
print("setup_method")
def test_div(self, a, b, result, open):
cal = Calculator()
assert self.cal.div(a, b) == result
def test_div(self):
cal = Calculator()
assert cal.div(4, 2) == 2
def test_add1(self, a, b, result):
cal = Calculator()
assert cal.add(a, b) == result
def test_add(self):
cal = Calculator()
assert cal.add(1, 1) == 2
def test_add4():
cal = Calculator()
assert cal.add(3, 4) == 7
def get_calc():
print("计算开始")
calc = Calculator()
yield calc
print("计算结束")
