Пример #1
0
class MaskRadiiPreviewDialog(MaskPreviewDialog):

    def _createPreview(self, frame):
        """ Should be implemented by subclasses to 
        create the items preview. 
        """
        from pyworkflow.gui.matplotlib_image import MaskPreview    
        if self.innerRadius is None:
            self.innerRadius = 0
        if self.outerRadius is None or self.outerRadius == -1 or self.outerRadius > self.dim_par/2:
            self.outerRadius = int(self.dim_par/2)
        self.preview = MaskPreview(frame, self.dim, label=self.previewLabel, outerRadius=int(self.outerRadius)*self.ratio, innerRadius=self.innerRadius*self.ratio)
        self.preview.grid(row=0, column=0) 
    
    def _createControls(self, frame):
            
        self.radiusSliderOut = LabelSlider(frame, 'Outer radius', 
                                           from_=0, to=int(self.dim_par/2), 
                                           value=self.outerRadius, step=1, 
                                           callback=lambda a, b, c:self.updateRadius(self.radiusSliderOut, self.radiusSliderIn))
        self.radiusSliderOut.grid(row=0, column=0, padx=5, pady=5) 

        self.radiusSliderIn = LabelSlider(frame, 'Inner radius', 
                                          from_=0, to=int(self.dim_par/2), 
                                          value=self.innerRadius, step=1, 
                                          callback=lambda a, b, c:self.updateRadius(self.radiusSliderOut, self.radiusSliderIn))
        self.radiusSliderIn.grid(row=1, column=0, padx=5, pady=5) 
    
    def updateRadius(self, radiusSliderOut, radiusSliderIn):
        self.preview.updateMask(outerRadius=radiusSliderOut.get() * self.ratio, 
                                innerRadius=radiusSliderIn.get() * self.ratio)     
        
    def getRadius(self, radiusSlider):
        return int(radiusSlider.get())
Пример #2
0
class MaskPreviewDialog(ImagePreviewDialog):
    def _beforePreview(self):
        self.dim = 256
        self.samplingRate = 1
        self.unit = getattr(self, 'unit', UNIT_PIXEL)

        if self.unit != UNIT_PIXEL:
            self.samplingRate = self.firstItem.getSamplingRate()

        self.dim_par = self.firstItem.getDim()[0] * self.samplingRate

        self.ratio = self.dim / float(self.dim_par)

        self.previewLabel = 'Central slice'

    def _createPreview(self, frame):
        """ Should be implemented by subclasses to 
        create the items preview. 
        """
        from pyworkflow.gui.matplotlib_image import MaskPreview

        if self.maskRadius == -1:
            self.iniRadius = self.dim_par / 2
        else:
            self.iniRadius = self.maskRadius

        self.preview = MaskPreview(frame,
                                   self.dim,
                                   label=self.previewLabel,
                                   outerRadius=self.iniRadius * self.ratio)
        self.preview.grid(row=0, column=0)

    def _createControls(self, frame):
        self.addRadiusBox(frame)

    def addRadiusBox(self, parent):
        self.radiusSlider = LabelSlider(
            parent,
            'Outer radius (%s)' % self.unit,
            from_=0,
            to=int(self.dim_par / 2),
            value=self.iniRadius,
            step=self.samplingRate,
            callback=lambda a, b, c: self.updateRadius())
        self.radiusSlider.grid(row=0, column=0, padx=5, pady=5)

    def updateRadius(self):
        self.preview.updateMask(self.radiusSlider.get() * self.ratio)

    def getRadius(self):
        return int(self.radiusSlider.get())
Пример #3
0
class MaskRadiiPreviewDialog(MaskPreviewDialog):
    def _createPreview(self, frame):
        """ Should be implemented by subclasses to 
        create the items preview. 
        """
        from pyworkflow.gui.matplotlib_image import MaskPreview
        if self.innerRadius is None:
            self.innerRadius = 0
        if self.outerRadius is None or self.outerRadius == -1 or self.outerRadius > self.dim_par / 2:
            self.outerRadius = int(self.dim_par / 2)
        self.preview = MaskPreview(frame,
                                   self.dim,
                                   label=self.previewLabel,
                                   outerRadius=int(self.outerRadius) *
                                   self.ratio,
                                   innerRadius=self.innerRadius * self.ratio)
        self.preview.grid(row=0, column=0)

    def _createControls(self, frame):

        self.radiusSliderOut = LabelSlider(
            frame,
            'Outer radius',
            from_=0,
            to=int(self.dim_par / 2),
            value=self.outerRadius,
            step=1,
            callback=lambda a, b, c: self.updateRadius(self.radiusSliderOut,
                                                       self.radiusSliderIn))
        self.radiusSliderOut.grid(row=0, column=0, padx=5, pady=5)

        self.radiusSliderIn = LabelSlider(
            frame,
            'Inner radius',
            from_=0,
            to=int(self.dim_par / 2),
            value=self.innerRadius,
            step=1,
            callback=lambda a, b, c: self.updateRadius(self.radiusSliderOut,
                                                       self.radiusSliderIn))
        self.radiusSliderIn.grid(row=1, column=0, padx=5, pady=5)

    def updateRadius(self, radiusSliderOut, radiusSliderIn):
        self.preview.updateMask(outerRadius=radiusSliderOut.get() * self.ratio,
                                innerRadius=radiusSliderIn.get() * self.ratio)

    def getRadius(self, radiusSlider):
        return int(radiusSlider.get())
Пример #4
0
class MaskPreviewDialog(ImagePreviewDialog):
    
    def _beforePreview(self):
        self.dim = 256
        self.samplingRate = 1
        self.unit = getattr(self, 'unit', UNIT_PIXEL)
        
        if self.unit != UNIT_PIXEL:
            self.samplingRate = self.firstItem.getSamplingRate()
            
        self.dim_par = self.firstItem.getDim()[0] * self.samplingRate
        
        self.ratio = self.dim / float(self.dim_par)
        
        self.previewLabel = 'Central slice'
    
    def _createPreview(self, frame):
        """ Should be implemented by subclasses to 
        create the items preview. 
        """
        from pyworkflow.gui.matplotlib_image import MaskPreview    
        
        if self.maskRadius == -1:
            self.iniRadius = self.dim_par/2 
        else:
            self.iniRadius = self.maskRadius
            
        self.preview = MaskPreview(frame, self.dim, label=self.previewLabel,
                                   outerRadius=self.iniRadius*self.ratio)
        self.preview.grid(row=0, column=0) 
    
    def _createControls(self, frame):
        self.addRadiusBox(frame) 
        
    def addRadiusBox(self, parent):
        self.radiusSlider = LabelSlider(parent, 'Outer radius (%s)' % self.unit,
                                        from_=0, to=int(self.dim_par/2),
                                        value=self.iniRadius,
                                        step=self.samplingRate,
                                        callback=lambda a, b, c:self.updateRadius())
        self.radiusSlider.grid(row=0, column=0, padx=5, pady=5) 
    
    def updateRadius(self):
        self.preview.updateMask(self.radiusSlider.get() * self.ratio)     
        
    def getRadius(self):
        return int(self.radiusSlider.get())
Пример #5
0
class MaskPreviewDialog(ImagePreviewDialog):
    def _beforePreview(self):
        self.dim = 256
        self.unit = getattr(self, 'unit', emcts.UNIT_PIXEL)
        self.samplingRate = self.firstItem.getSamplingRate()
        self.dim_par = self.firstItem.getDim()[0]
        self.ratio = self.dim / float(self.dim_par)
        self.previewLabel = 'Central slice'

    def _createPreview(self, frame):
        """ Should be implemented by subclasses to
        create the items preview.
        """

        # Insert the corresponding explanation text
        self.expText.updateExpText(emcts.CIRCLE_MASK_WIZ_MSG)

        from pyworkflow.gui.matplotlib_image import MaskPreview

        if self.maskRadius == -1:
            self.iniRadius = self.dim_par / 2
        else:
            self.iniRadius = self.maskRadius

        if self.unit == emcts.UNIT_ANGSTROM:
            self.iniRadius = self.iniRadius / self.samplingRate

        listeners = {
            "<Button-4>": self.makeBigger,
            "<Button-5>": self.makeSmaller
        }

        self.preview = MaskPreview(frame,
                                   self.dim,
                                   label=self.previewLabel,
                                   listenersDict=listeners)

        self.preview.grid(row=1, column=0)

    def makeBigger(self, event):
        new_val = self.iniRadius + 1
        if new_val <= self.dim_par / 2:  # Don't make the mask bigger unless the is equal or lower than the max
            self.iniRadius = self.iniRadius + 1
            self.manageMaskVals()

    def makeSmaller(self, event):
        new_val = self.iniRadius - 1
        if new_val >= 1:  # Don't make the mask smaller unless the radius is equal or greater than 1
            self.iniRadius = self.iniRadius - 1
            self.manageMaskVals()

    def manageMaskVals(self):
        # Set the ring slider in case it comes from the mouse wheel
        self.setRadius(self.radiusSlider, self.iniRadius)
        # Show values
        self.showValues(self.hfVar, self.radiusSlider)
        # Update mask
        self.preview.updateMask(self.iniRadius * self.ratio)

    def _createControls(self, frame):
        self.addRadiusBox(frame)
        self.hfVar = tk.StringVar()
        self.hfLabel = tk.Label(frame, textvariable=self.hfVar, width=20)
        self.hfLabel.grid(row=0, column=1, sticky='NSE', padx=5, pady=5)
        self.manageMaskVals()

    def addRadiusBox(self, parent):
        self.radiusSlider = LabelSlider(
            parent,
            'Mask radius',
            from_=1,
            to=int(self.dim_par / 2),
            value=self.iniRadius,
            step=1,
            length=150,
            showvalue=0,
            callback=lambda a, b, c: self.updateSliderRadius())
        self.radiusSlider.grid(row=0, column=0, sticky='NEWS')

    def updateSliderRadius(self):

        new_val = self.getRadius(self.radiusSlider)
        # Carry out the action only if the slider is clicked & dragged (prevent from minimal variations when the mouse
        # is on the slider but not clicking on it)
        if abs(new_val - self.iniRadius) >= 1:
            self.iniRadius = new_val
            self.manageMaskVals()

    def showValues(self, var2set, radiusSlider):
        """
        Show the values selected for the inner and outer radius. If the units are angstroms (sampling_rate = 1,
        it will show only one value to avoid redundancies
        """
        pixVal = self.getRadius(radiusSlider)
        if self.samplingRate == 1:
            var2set.set('{:6.1f} {}'.format(pixVal, emcts.UNIT_PIXEL))
        else:
            var2set.set('{:5.0f} pix | {:6.1f} {}'.format(
                pixVal, self.getRadiusAngstroms(radiusSlider),
                emcts.UNIT_ANGSTROM_SYMBOL))

    @staticmethod
    def getRadius(radiusSlider):
        return radiusSlider.get()

    @staticmethod
    def setRadius(radiusSlider, val):
        radiusSlider.slider.set(val)

    def getRadiusAngstroms(self, radiusSlider):
        return convertPixToLength(self.samplingRate, radiusSlider.get())
Пример #6
0
class MaskRadiiPreviewDialog(MaskPreviewDialog):
    def _createPreview(self, frame):
        """ Should be implemented by subclasses to
        create the items preview.
        """
        # Insert the corresponding explanation text
        self.expText.updateExpText(emcts.RING_MASK_WIZ_MSG)

        from pyworkflow.gui.matplotlib_image import MaskPreview
        if self.innerRadius is None:
            self.innerRadius = 1
        if self.outerRadius is None or self.outerRadius == -1 or self.outerRadius > self.dim_par / 2:
            self.outerRadius = int(self.dim_par / 2)

        if self.unit == emcts.UNIT_ANGSTROM:
            self.innerRadius = self.innerRadius / self.samplingRate
            self.outerRadius = self.innerRadius / self.samplingRate

        listeners = {
            "<Button-4>": self.makeBigger,
            "<Button-5>": self.makeSmaller,
            "<Up>": self.upKeyPress,
            "<Down>": self.downKeyPress
        }

        self.preview = MaskPreview(frame,
                                   self.dim,
                                   label=self.previewLabel,
                                   listenersDict=listeners)

        self.preview.grid(row=1, column=0)

    def upKeyPress(self, event):
        self.isInnerRad = False
        self.highlightOuterSlider()

    def downKeyPress(self, event):
        self.isInnerRad = True
        self.highlightInnerSlider()

    def highlightOuterSlider(self):
        self.radiusSliderOut.highlightLabel()
        self.radiusSliderIn.removeHighlightFromLabel()

    def highlightInnerSlider(self):
        self.radiusSliderIn.highlightLabel()
        self.radiusSliderOut.removeHighlightFromLabel()

    def makeBigger(self, event):
        self.isMakingBigger = True
        if self.isInnerRad:
            self.innerRadius = self.innerRadius + self.step
        else:
            new_val = self.outerRadius + self.step
            if new_val <= int(
                    self.dim_par / 2
            ):  # Don't make the mask bigger unless the is equal or lower than the max
                self.outerRadius = new_val
        self.manageMaskVals()

    def makeSmaller(self, event):
        self.isMakingBigger = False
        if self.isInnerRad:
            new_val = self.innerRadius - self.step
            if new_val >= 0:
                self.innerRadius = new_val
        else:
            self.outerRadius = self.outerRadius - self.step
        self.manageMaskVals()

    def manageMaskVals(self):
        if self.isMakingBigger:
            if self.isInnerRad and self.innerRadius >= self.outerRadius:  # Inner ring can't be bigger than outer ring
                # Subtract one step to go back to the nearest lower value
                self.innerRadius = self.outerRadius - self.step
        else:
            if not self.isInnerRad and self.outerRadius <= self.innerRadius:  # Outer ring can't be smaller than inner
                # ring
                # Add one step to go back to the nearest higher value
                self.outerRadius = self.innerRadius + self.step

        # Set the ring sliders in case it comes from the mouse wheel
        self.setRadius(self.radiusSliderIn, self.innerRadius)
        self.setRadius(self.radiusSliderOut, self.outerRadius)

        # Show values
        self.showValues(self.orVar, self.radiusSliderOut)
        self.showValues(self.irVar, self.radiusSliderIn)

        # Update mask
        self.preview.updateMask(self.outerRadius * self.ratio,
                                self.innerRadius * self.ratio)

    def _createControls(self, frame):
        self.step = 1
        to = int(self.dim_par / 2)
        self.radiusSliderOut = LabelSlider(
            frame,
            'Outer radius',
            from_=1,
            to=to,
            value=self.outerRadius,
            step=self.step,
            callback=lambda a, b, c: self.updateSliderOuterRadius(),
            length=150,
            showvalue=0)
        self.radiusSliderOut.highlightLabel()
        self.orVar = tk.StringVar()
        self.orLabel = tk.Label(frame, textvariable=self.orVar, width=20)

        self.radiusSliderIn = LabelSlider(
            frame,
            'Inner radius',
            from_=1,
            to=to,
            value=self.innerRadius,
            step=self.step,
            callback=lambda a, b, c: self.updateSliderInnerRadius(),
            length=150,
            showvalue=0)
        self.irVar = tk.StringVar()
        self.irLabel = tk.Label(frame, textvariable=self.irVar, width=20)
        # Pack and configure outer radius slider
        self.radiusSliderOut.grid(row=0, column=0, sticky='NEWS')
        self.radiusSliderOut.columnconfigure(0, weight=1)
        self.orLabel.grid(row=0, column=1, sticky='NSE', padx=5, pady=5)
        self.orLabel.columnconfigure(0, weight=1)
        # Pack and configure inner radius slider
        self.radiusSliderIn.grid(row=1, column=0, sticky='NEWS')
        self.radiusSliderIn.columnconfigure(0, weight=1)
        self.irLabel.grid(row=1, column=1, sticky='NSE', padx=5, pady=5)
        self.irLabel.columnconfigure(0, weight=1)
        # Update both mask and sliders with the initial values
        self.manageMaskVals()

    def updateSliderOuterRadius(self):
        new_val = self.getRadius(self.radiusSliderOut)
        # Carry out the action only if the slider is clicked & dragged (prevent from minimal variations when the mouse
        # is on the slider but not clicking on it)
        if abs(new_val - self.outerRadius) >= self.step:
            self.highlightOuterSlider()
            self.isInnerRad = False
            self.isMakingBigger = False
            # Check if the user is making the ring bigger
            if new_val > self.outerRadius:
                self.isMakingBigger = True

            self.outerRadius = new_val
            self.manageMaskVals()

    def updateSliderInnerRadius(self):
        new_val = self.getRadius(self.radiusSliderIn)
        # Highlight only if the slider is clicked & dragged (prevent from minimal variations when the mouse is on the
        # slider but not clicking on it)
        if abs(new_val - self.innerRadius) >= self.step:
            self.highlightInnerSlider()
            self.isInnerRad = True
            self.isMakingBigger = False
            # Check if the user is making the ring bigger
            if new_val > self.innerRadius:
                self.isMakingBigger = True

            self.innerRadius = new_val
            self.manageMaskVals()