def displayAnnotation(self, geom, message):
''' Display a specific message in the centroid of a specific geometry
'''
centroid = geom.centroid()
# clean previous annotations:
for annotation in self.annotations:
try:
scene = annotation.scene()
if scene:
scene.removeItem(annotation)
except:
# annotation can be erased by QGIS interface
pass
self.annotations = []
# build annotation
textDoc = QTextDocument(message)
item = QgsTextAnnotationItem(self.iface.mapCanvas())
item.setMapPosition(centroid.asPoint())
item.setFrameSize(textDoc.size())
item.setDocument(textDoc)
item.update()
# add to annotations
self.annotations.append(item)
# center in the centroid
self.iface.mapCanvas().setCenter(centroid.asPoint())
self.iface.mapCanvas().zoomScale(float(self.defaultZoomScale))
self.iface.mapCanvas().refresh()
def __init__(self, parent, dlgType):
FlightPlanBaseDlg.__init__(self, parent)
# self.dlgType = dlgType
self.setObjectName("PaIlsDlg")
self.dlgType = dlgType
if self.dlgType == "NpaOnFix":
self.surfaceType = SurfaceTypes.NpaOnFix
else:
self.surfaceType = SurfaceTypes.NpaOverheadingNavaid
self.initParametersPan()
self.setWindowTitle(self.surfaceType)
self.resize(540, 600)
QgisHelper.matchingDialogSize(self, 650, 700)
self.surfaceList = None
self.manualPolygon = None
self.mapToolPan = None
self.toolSelectByPolygon = None
self.accepted.connect(self.closed)
self.rejected.connect(self.closed)
self.wptLayer = None
self.arpFeatureArray = []
self.currentLayer = define._canvas.currentLayer()
self.rwyFeatureArray = []
self.rwyEndPosition = None
self.initAerodromeAndRwyCmb()
self.socRubber = None
self.socAnnotation = QgsTextAnnotationItem(define._canvas)
self.socAnnotation.setDocument(QTextDocument(Captions.SOC))
self.socAnnotation.setFrameBackgroundColor(Qt.white)
self.socAnnotation.setFrameSize(QSizeF(30, 20))
self.socAnnotation.setFrameColor(Qt.magenta)
self.socAnnotation.hide()
self.socPoint3d = None
self.daRubber = None
self.daAnnotation = QgsTextAnnotationItem(define._canvas)
self.daAnnotation.setDocument(QTextDocument(Captions.DA))
self.daAnnotation.setFrameBackgroundColor(Qt.white)
self.daAnnotation.setFrameSize(QSizeF(30, 20))
self.daAnnotation.setFrameColor(Qt.magenta)
self.daAnnotation.hide()
self.daPoint3d = None
self.annotationFAWP = self.parametersPanel.pnlFafPosition.annotation
self.annotationMAPt = self.parametersPanel.pnlMaPtPosition.annotation
def createItem(self, e):
mapCoord = self.toMapCoordinates(e.pos())
textItem = QgsTextAnnotationItem(self.mCanvas)
textItem.setMapPosition(self.toMapCoordinates(e.pos()))
textItem.setFrameSize(QSizeF(200, 100))
textItem.setSelected(True)
return textItem
# coding: utf-8
from PyQt4.QtCore import QSizeF
from PyQt4.QtGui import QColor, QTextDocument
from qgis.core import QgsPoint
from qgis.gui import QgsTextAnnotationItem
from qgis.utils import iface
canvas = iface.mapCanvas()
text_annotation_item = QgsTextAnnotationItem(canvas)
X, Y = float(3), float(45)
point = QgsPoint(X, Y)
text_annotation_item.setMapPosition(point)
text_annotation_item.setFrameSize(QSizeF(300, 200))
text_annotation_item.setFrameColor(QColor(0, 255, 0))
text_annotation_item.setFrameBackgroundColor(QColor(128, 128, 128))
text_document = QTextDocument()
html_content = "<b>New annotation</b>"
font_color, font_family, font_size = "#123456", "Times New Roman", 16
text_document.setHtml('<font style="color:' + font_color +
"; font-family:" + font_family + "; font-size: " +
str(font_size) + 'px">' + html_content + "</font>")
text_annotation_item.setDocument(text_document)
canvas.refresh()
# Then remove
# canvas.scene().removeItem(text_annotation_item)
def setupUi(self, Form):
Form.setObjectName(_fromUtf8("Form"))
Form.resize(435, 580)
self.verticalLayout = QVBoxLayout(Form)
self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
self.gbParameters = GroupBox(Form)
self.gbParameters.Caption = "General"
self.verticalLayout.addWidget(self.gbParameters)
self.cmbAerodrome = ComboBoxPanel(self.gbParameters, True)
self.cmbAerodrome.Caption = "Aerodrome"
self.cmbAerodrome.LabelWidth = 150
self.cmbAerodrome.Width = 150
self.gbParameters.Add = self.cmbAerodrome
self.cmbRwyDir = ComboBoxPanel(self.gbParameters, True)
self.cmbRwyDir.Caption = "Runway Direction"
self.cmbRwyDir.LabelWidth = 150
self.cmbRwyDir.Width = 150
self.gbParameters.Add = self.cmbRwyDir
self.annotationFAWP = QgsTextAnnotationItem(define._canvas)
self.annotationFAWP.setDocument(QTextDocument("FAF"))
self.annotationFAWP.hide()
self.pnlFafPosition = PositionPanel(self.gbParameters,
self.annotationFAWP)
self.pnlFafPosition.Caption = "FAF Position"
self.pnlFafPosition.btnCalculater.hide()
self.pnlFafPosition.hideframe_Altitude()
self.gbParameters.Add = self.pnlFafPosition
self.pnlThrPosition = PositionPanel(self.gbParameters)
self.pnlThrPosition.Caption = "Threshold Position"
self.pnlThrPosition.btnCalculater.hide()
self.gbParameters.Add = self.pnlThrPosition
# self.annotationMapt = QgsTextAnnotationItem(define._canvas)
# self.annotationMapt.setDocument(QTextDocument("MAPt"))
# self.annotationMapt.hide()
self.pnlMaPtPosition = PositionPanel(self.gbParameters)
self.pnlMaPtPosition.Caption = "MAPt Position"
self.pnlMaPtPosition.btnCalculater.hide()
self.pnlMaPtPosition.hideframe_Altitude()
self.gbParameters.Add = self.pnlMaPtPosition
self.pnlRwyEndPosition = PositionPanel(self.gbParameters)
self.pnlRwyEndPosition.Caption = "Rwy End Position"
self.pnlRwyEndPosition.btnCalculater.hide()
self.pnlRwyEndPosition.hideframe_Altitude()
self.gbParameters.Add = self.pnlRwyEndPosition
self.pnlRwyEndPosition.Visible = False
self.pnlInboundTrack = TrackRadialBoxPanel(self.gbParameters)
self.pnlInboundTrack.Caption = "In-bound Track"
self.pnlInboundTrack.LabelWidth = 150
self.pnlInboundTrack.Enabled = False
self.gbParameters.Add = self.pnlInboundTrack
self.pnlEstimatedAltitude = AltitudeBoxPanel(self.gbParameters)
self.pnlEstimatedAltitude.Caption = "Estimated Altitude"
self.pnlEstimatedAltitude.LabelWidth = 150
self.pnlEstimatedAltitude.Value = Altitude(1000)
self.gbParameters.Add = self.pnlEstimatedAltitude
self.pnlAerodromeAltitude = AltitudeBoxPanel(self.gbParameters)
self.pnlAerodromeAltitude.Caption = "Aerodrome Altitude"
self.pnlAerodromeAltitude.LabelWidth = 150
self.pnlAerodromeAltitude.Value = Altitude(1000)
self.gbParameters.Add = self.pnlAerodromeAltitude
self.pnlIsa = NumberBoxPanel(self.gbParameters, "0.0")
self.pnlIsa.CaptionUnits = define._degreeStr + "C"
self.pnlIsa.Caption = "ISA"
self.pnlIsa.LabelWidth = 150
self.pnlIsa.Value = 15
self.gbParameters.Add = self.pnlIsa
self.cmbAircraftCategory = ComboBoxPanel(self.gbParameters)
self.cmbAircraftCategory.Caption = "Aircraft Category"
self.cmbAircraftCategory.LabelWidth = 150
self.gbParameters.Add = self.cmbAircraftCategory
# self.pnlHeightLoss = AltitudeBoxPanel(self.gbParameters)
# self.pnlHeightLoss.Caption = "Height Loss"
# self.pnlHeightLoss.LabelWidth = 150
# self.gbParameters.Add = self.pnlHeightLoss
self.pnlIas = SpeedBoxPanel(self.gbParameters)
self.pnlIas.Caption = "IAS"
self.pnlIas.LabelWidth = 150
self.pnlIas.Value = Speed(100)
self.pnlIas.Enabled = False
self.gbParameters.Add = self.pnlIas
self.pnlTas = SpeedBoxPanel(self.gbParameters)
self.pnlTas.Caption = "TAS"
self.pnlTas.Enabled = False
self.pnlTas.LabelWidth = 150
self.gbParameters.Add = self.pnlTas
self.pnlWind = WindPanel(self.gbParameters)
self.pnlWind.LabelWidth = 145
self.gbParameters.Add = self.pnlWind
self.pnlSocAltitude = AltitudeBoxPanel(self.gbParameters)
self.pnlSocAltitude.Caption = "SOC Altitude"
self.pnlSocAltitude.LabelWidth = 150
self.gbParameters.Add = self.pnlSocAltitude
self.pnlDistFixTolerance = DistanceBoxPanel(self.gbParameters,
DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistFixTolerance.Caption = "FIX Tolerance"
self.pnlDistFixTolerance.LabelWidth = 150
self.pnlDistFixTolerance.Button = "coordinate_capture.png"
self.pnlDistFixTolerance.Value = Distance(900)
# self.pnlDistFixTolerance.Enabled = False
self.gbParameters.Add = self.pnlDistFixTolerance
self.pnlDistD = DistanceBoxPanel(self.gbParameters, DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistD.Caption = "d(10kts/3s)"
self.pnlDistD.LabelWidth = 150
self.pnlDistD.Button = None
self.pnlDistD.Value = Distance(900)
self.pnlDistD.Enabled = False
self.gbParameters.Add = self.pnlDistD
self.pnlDistX = DistanceBoxPanel(self.gbParameters, DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistX.Caption = "X(10kts/15s)"
self.pnlDistX.LabelWidth = 150
self.pnlDistX.Button = None
self.pnlDistX.Value = Distance(900)
self.pnlDistX.Enabled = False
self.gbParameters.Add = self.pnlDistX
self.pnlDistOfFafMapt = DistanceBoxPanel(self.gbParameters,
DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistOfFafMapt.Caption = "FAP-MAPt Distance"
self.pnlDistOfFafMapt.LabelWidth = 150
self.pnlDistOfFafMapt.Button = None
self.pnlDistOfFafMapt.Enabled = False
self.gbParameters.Add = self.pnlDistOfFafMapt
self.pnlDistOfMaptThr = DistanceBoxPanel(self.gbParameters,
DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistOfMaptThr.Caption = "MAPt-THR Distance"
self.pnlDistOfMaptThr.LabelWidth = 150
self.pnlDistOfMaptThr.Button = None
self.pnlDistOfMaptThr.Enabled = False
self.gbParameters.Add = self.pnlDistOfMaptThr
self.pnlDistOfMaptSoc = DistanceBoxPanel(self.gbParameters,
DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistOfMaptSoc.Caption = "MAPt-SOC Distance"
self.pnlDistOfMaptSoc.LabelWidth = 150
self.pnlDistOfMaptSoc.Button = None
self.pnlDistOfMaptSoc.Enabled = False
self.gbParameters.Add = self.pnlDistOfMaptSoc
self.pnlDistOfSocThr = DistanceBoxPanel(self.gbParameters,
DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistOfSocThr.Caption = "THR-SOC Distance"
self.pnlDistOfSocThr.LabelWidth = 150
self.pnlDistOfSocThr.Button = None
self.pnlDistOfSocThr.Enabled = False
self.gbParameters.Add = self.pnlDistOfSocThr
class NpaOnFixDlg(FlightPlanBaseDlg):
def __init__(self, parent, dlgType):
FlightPlanBaseDlg.__init__(self, parent)
# self.dlgType = dlgType
self.setObjectName("PaIlsDlg")
self.dlgType = dlgType
if self.dlgType == "NpaOnFix":
self.surfaceType = SurfaceTypes.NpaOnFix
else:
self.surfaceType = SurfaceTypes.NpaOverheadingNavaid
self.initParametersPan()
self.setWindowTitle(self.surfaceType)
self.resize(540, 600)
QgisHelper.matchingDialogSize(self, 650, 700)
self.surfaceList = None
self.manualPolygon = None
self.mapToolPan = None
self.toolSelectByPolygon = None
self.accepted.connect(self.closed)
self.rejected.connect(self.closed)
self.wptLayer = None
self.arpFeatureArray = []
self.currentLayer = define._canvas.currentLayer()
self.rwyFeatureArray = []
self.rwyEndPosition = None
self.initAerodromeAndRwyCmb()
self.socRubber = None
self.socAnnotation = QgsTextAnnotationItem(define._canvas)
self.socAnnotation.setDocument(QTextDocument(Captions.SOC))
self.socAnnotation.setFrameBackgroundColor(Qt.white)
self.socAnnotation.setFrameSize(QSizeF(30, 20))
self.socAnnotation.setFrameColor(Qt.magenta)
self.socAnnotation.hide()
self.socPoint3d = None
self.daRubber = None
self.daAnnotation = QgsTextAnnotationItem(define._canvas)
self.daAnnotation.setDocument(QTextDocument(Captions.DA))
self.daAnnotation.setFrameBackgroundColor(Qt.white)
self.daAnnotation.setFrameSize(QSizeF(30, 20))
self.daAnnotation.setFrameColor(Qt.magenta)
self.daAnnotation.hide()
self.daPoint3d = None
self.annotationFAWP = self.parametersPanel.pnlFafPosition.annotation
self.annotationMAPt = self.parametersPanel.pnlMaPtPosition.annotation
# self.surfaceType = self.dlgType
def initAerodromeAndRwyCmb(self):
if self.currentLayer != None and self.currentLayer.isValid(
) and isinstance(self.currentLayer, QgsVectorLayer):
self.arpFeatureArray = self.aerodromeAndRwyCmbFill(
self.currentLayer, self.parametersPanel.cmbAerodrome, None,
self.parametersPanel.cmbRwyDir)
self.calcRwyBearing()
def calcRwyBearing(self):
try:
point3dMapt = self.parametersPanel.pnlMaPtPosition.Point3d
point3dFaf = self.parametersPanel.pnlFafPosition.Point3d
if point3dMapt == None:
self.parametersPanel.pnlInboundTrack.Value = 0.0
return
self.parametersPanel.pnlInboundTrack.Value = round(
Unit.ConvertRadToDeg(
MathHelper.getBearing(point3dFaf, point3dMapt)), 4)
# if point3dFaf == None:
# self.parametersPanel.pnlInboundTrack.Value = round(Unit.ConvertRadToDeg(MathHelper.getBearing(point3dThr, self.parametersPanel.pnlRwyEndPosition.Point3d)), 4)
# point3dFap = self.rwyEndPosition
# else:
# self.parametersPanel.pnlInboundTrack.Value = round(Unit.ConvertRadToDeg(MathHelper.getBearing(point3dFap, point3dThr)), 4)
self.showMarkDaSoc()
except:
pass
# self.ui.horizontalLayout_6.addWidget(self.ui.frame_3)
def aerodromeAndRwyCmbFill(self,
layer,
aerodromeCmbObj,
aerodromePositionPanelObj,
rwyDirCmbObj=None):
idx = layer.fieldNameIndex('Type')
idxName = layer.fieldNameIndex('Name')
idxLat = layer.fieldNameIndex('Latitude')
idxLong = layer.fieldNameIndex('Longitude')
idxAltitude = layer.fieldNameIndex('Altitude')
arpList = []
arpFeatureList = []
if idx >= 0:
featIter = layer.getFeatures()
for feat in featIter:
attrValue = feat.attributes()[idx].toString()
attrValue = QString(attrValue)
attrValue = attrValue.replace(" ", "")
attrValue = attrValue.toUpper()
if attrValue == "AERODROMEREFERENCEPOINT":
arpList.append(attrValue)
arpFeatureList.append(feat)
if len(arpList) != 0:
i = -1
attrValueList = []
for feat in arpFeatureList:
attrValue = feat.attributes()[idxName].toString()
items = attrValueList
if len(items) != 0:
existFlag = False
for item in items:
if item == attrValue:
existFlag = True
if existFlag:
continue
attrValueList.append(attrValue)
attrValueList.sort()
# attrValueList.insert(0, "")
aerodromeCmbObj.Items = attrValueList
aerodromeCmbObj.SelectedIndex = 0
# if idxAttributes
for feat in arpFeatureList:
attrValue = feat.attributes()[idxName].toString()
if attrValue != aerodromeCmbObj.SelectedItem:
continue
attrValue = feat.attributes()[idxLat].toDouble()
lat = attrValue[0]
attrValue = feat.attributes()[idxLong].toDouble()
long = attrValue[0]
attrValue = feat.attributes()[idxAltitude].toDouble()
alt = attrValue[0]
# aerodromePositionPanelObj.Point3d = Point3D(long, lat, alt)
self.connect(aerodromeCmbObj, SIGNAL("Event_0"),
self.aerodromeCmbObj_Event_0)
break
if rwyDirCmbObj != None:
idxAttr = layer.fieldNameIndex('Attributes')
if idxAttr >= 0:
rwyFeatList = []
featIter = layer.getFeatures()
rwyDirCmbObjItems = []
for feat in featIter:
attrValue = feat.attributes()[idxAttr].toString()
if attrValue == aerodromeCmbObj.SelectedItem:
attrValue = feat.attributes()[idxName].toString()
s = attrValue.replace(" ", "")
compStr = s.left(6).toUpper()
if compStr == "THRRWY":
valStr = s.right(s.length() - 6)
rwyDirCmbObjItems.append(
aerodromeCmbObj.SelectedItem + " RWY " +
valStr)
rwyFeatList.append(feat)
rwyDirCmbObjItems.sort()
rwyDirCmbObj.Items = rwyDirCmbObjItems
self.connect(rwyDirCmbObj, SIGNAL("Event_0"),
self.rwyDirCmbObj_Event_0)
self.rwyFeatureArray = rwyFeatList
self.rwyDirCmbObj_Event_0()
self.aerodromeCmbObj_Event_0()
return arpFeatureList
def rwyDirCmbObj_Event_0(self):
if len(self.rwyFeatureArray) == 0:
self.calcRwyBearing()
return
idxName = self.currentLayer.fieldNameIndex('Name')
idxLat = self.currentLayer.fieldNameIndex('Latitude')
idxLong = self.currentLayer.fieldNameIndex('Longitude')
idxAltitude = self.currentLayer.fieldNameIndex('Altitude')
idxAttr = self.currentLayer.fieldNameIndex('Attributes')
# rwyFeatList = []
featIter = self.currentLayer.getFeatures()
# for feat in featIter:
# attrValue = feat.attributes()[idxAttr].toString()
# if attrValue == self.cmbAerodrome.SelectedItem:
# attrValue = feat.attributes()[idxName].toString()
# s = attrValue.replace(" ", "")
# compStr = s.left(6).toUpper()
# if compStr == "THRRWY":
# valStr = s.right(s.length() - 6)
# rwyFeatList.append(feat)
for feat in self.rwyFeatureArray:
attrValue = feat.attributes()[idxName].toString()
attrValueStr = QString(attrValue)
attrValueStr = attrValueStr.replace(
" ", "").right(attrValueStr.length() - 3)
itemStr = self.parametersPanel.cmbRwyDir.SelectedItem
itemStr = QString(itemStr)
itemStr = itemStr.replace(" ", "").right(itemStr.length() - 4)
if attrValueStr != itemStr:
continue
latAttrValue = feat.attributes()[idxLat].toDouble()
lat = latAttrValue[0]
longAttrValue = feat.attributes()[idxLong].toDouble()
long = longAttrValue[0]
altAttrValue = feat.attributes()[idxAltitude].toDouble()
alt = altAttrValue[0]
self.parametersPanel.pnlThrPosition.Point3d = Point3D(
long, lat, alt)
valStr = None
if attrValue.right(1).toUpper() == "L" or attrValue.right(
1).toUpper() == "R":
s = attrValue.left(attrValue.length() - 1)
valStr = s.right(2)
else:
valStr = attrValue.right(2)
val = int(valStr)
val += 18
if val > 36:
val -= 36
newValStr = None
if len(str(val)) == 1:
newValStr = "0" + str(val)
else:
newValStr = str(val)
otherAttrValue = attrValue.replace(valStr, newValStr)
ss = otherAttrValue.right(1)
if ss.toUpper() == "L":
otherAttrValue = otherAttrValue.left(otherAttrValue.length() -
1) + "R"
elif ss.toUpper() == "R":
otherAttrValue = otherAttrValue.left(otherAttrValue.length() -
1) + "L"
for feat in self.rwyFeatureArray:
attrValue = feat.attributes()[idxName].toString()
if attrValue != otherAttrValue:
continue
latAttrValue = feat.attributes()[idxLat].toDouble()
lat = latAttrValue[0]
longAttrValue = feat.attributes()[idxLong].toDouble()
long = longAttrValue[0]
altAttrValue = feat.attributes()[idxAltitude].toDouble()
alt = altAttrValue[0]
self.parametersPanel.pnlRwyEndPosition.Point3d = Point3D(
long, lat, alt)
break
break
self.calcRwyBearing()
def aerodromeCmbObj_Event_0(self):
if len(self.arpFeatureArray) == 0:
return
# self.parametersPanel.pnlArp.Point3d = None
self.parametersPanel.pnlRwyEndPosition.Point3d = None
self.parametersPanel.pnlThrPosition.Point3d = None
idxName = self.currentLayer.fieldNameIndex('Name')
idxLat = self.currentLayer.fieldNameIndex('Latitude')
idxLong = self.currentLayer.fieldNameIndex('Longitude')
idxAltitude = self.currentLayer.fieldNameIndex('Altitude')
self.rwyFeatureArray = []
# if idxAttributes
for feat in self.arpFeatureArray:
attrValue = feat.attributes()[idxName].toString()
if attrValue != self.parametersPanel.cmbAerodrome.SelectedItem:
continue
attrValue = feat.attributes()[idxLat].toDouble()
lat = attrValue[0]
attrValue = feat.attributes()[idxLong].toDouble()
long = attrValue[0]
attrValue = feat.attributes()[idxAltitude].toDouble()
alt = attrValue[0]
# self.parametersPanel.pnlArp.Point3d = Point3D(long, lat, alt)
break
idxAttr = self.currentLayer.fieldNameIndex('Attributes')
if idxAttr >= 0:
self.parametersPanel.cmbRwyDir.Clear()
rwyFeatList = []
featIter = self.currentLayer.getFeatures()
for feat in featIter:
attrValue = feat.attributes()[idxAttr].toString()
if attrValue == self.parametersPanel.cmbAerodrome.SelectedItem:
attrValue = feat.attributes()[idxName].toString()
s = attrValue.replace(" ", "")
compStr = s.left(6).toUpper()
if compStr == "THRRWY":
valStr = s.right(s.length() - 6)
self.parametersPanel.cmbRwyDir.Add(
self.parametersPanel.cmbAerodrome.SelectedItem +
" RWY " + valStr)
rwyFeatList.append(feat)
self.rwyFeatureArray = rwyFeatList
self.rwyDirCmbObj_Event_0()
def closed(self):
if self.mapToolPan != None:
self.mapToolPan.deactivate()
if self.toolSelectByPolygon != None:
self.toolSelectByPolygon.deactivate()
def initObstaclesModel(self):
self.obstaclesModel.MocMultiplier = self.parametersPanel.mocSpinBox.value(
)
return FlightPlanBaseDlg.initObstaclesModel(self)
def exportResult(self):
result, resultHideColumnNames = FlightPlanBaseDlg.exportResult(self)
if not result:
return
filePathDir = QFileDialog.getSaveFileName(
self, "Export Obstacle Data",
QCoreApplication.applicationDirPath(),
"ExportObstaclefiles(*.xml)")
if filePathDir == "":
return
parameterList = self.getParameterList()
DataHelper.saveExportResult(filePathDir, self.surfaceType,
self.ui.tblObstacles, None, parameterList,
resultHideColumnNames)
def getParameterList(self):
parameterList = []
parameterList.append(("general", "group"))
parameterList.append(
("RNAV Specification",
self.parametersPanel.cmbRnavSpecification.SelectedItem))
if self.parametersPanel.cmbRnavSpecification.SelectedIndex == 0:
parameterList.append(
("ATT",
self.parametersPanel.pnlTolerances.txtAtt.text() + "nm"))
parameterList.append(
("XTT",
self.parametersPanel.pnlTolerances.txtXtt.text() + "nm"))
parameterList.append(
("1/2 A/W",
self.parametersPanel.pnlTolerances.txtAsw.text() + "nm"))
else:
if self.parametersPanel.cmbPhaseOfFlight.currentIndex() != 0:
parameterList.append(
("Aerodrome Reference Point(ARP)", "group"))
longLatPoint = QgisHelper.Meter2Degree(
float(self.parametersPanel.pnlArp.txtPointX.text()),
float(self.parametersPanel.pnlArp.txtPointY.text()))
parameterList.append(
("Lat", self.parametersPanel.pnlArp.txtLat.Value))
parameterList.append(
("Lon", self.parametersPanel.pnlArp.txtLong.Value))
parameterList.append(
("X", self.parametersPanel.pnlArp.txtPointX.text()))
parameterList.append(
("Y", self.parametersPanel.pnlArp.txtPointY.text()))
parameterList.append(("Waypoint", "group"))
longLatPoint = QgisHelper.Meter2Degree(
float(self.parametersPanel.pnlWaypoint1.txtPointX.text()),
float(self.parametersPanel.pnlWaypoint1.txtPointY.text()))
parameterList.append(
("Lat", self.parametersPanel.pnlWaypoint1.txtLat.Value))
parameterList.append(
("Lon", self.parametersPanel.pnlWaypoint1.txtLong.Value))
parameterList.append(
("X", self.parametersPanel.pnlWaypoint1.txtPointX.text()))
parameterList.append(
("Y", self.parametersPanel.pnlWaypoint1.txtPointY.text()))
parameterList.append(
("Cat.H", str(self.parametersPanel.chbCatH.Checked)))
parameterList.append(
(self.parametersPanel.chbCircularArcs.Caption,
str(self.parametersPanel.chbCircularArcs.Checked)))
parameterList.append(("Parameters", "group"))
parameterList.append(
("Selection Mode",
self.parametersPanel.cmbSelectionMode.SelectedItem))
parameterList.append(
("In-bound Track", "Plan : " +
str(self.parametersPanel.pnlInbound.txtRadialPlan.Value) +
define._degreeStr))
parameterList.append(
("", "Geodetic : " +
str(self.parametersPanel.pnlInbound.txtRadialGeodetic.Value) +
define._degreeStr))
# parameterList.append(("In-bound Track", self.parametersPanel.txtInbound.Value))
parameterList.append(
("Out-bound Track", "Plan : " +
str(self.parametersPanel.pnlOutbound.txtRadialPlan.Value) +
define._degreeStr))
parameterList.append(
("", "Geodetic : " +
str(self.parametersPanel.pnlOutbound.txtRadialGeodetic.Value) +
define._degreeStr))
# parameterList.append(("Out-bound Track", self.parametersPanel.txtOutbound.Value))
parameterList.append(
("IAS", str(self.parametersPanel.pnlIas.Value.Knots) + "kts"))
parameterList.append(
("Altitude",
str(self.parametersPanel.pnlAltitude.Value.Feet) + "ft"))
parameterList.append(("ISA", str(self.parametersPanel.pnlIsa.Value)))
parameterList.append(
("Bank Angle", str(self.parametersPanel.pnlBankAngle.Value)))
parameterList.append(
("Wind", str(self.parametersPanel.pnlWind.Value.Knots) + "kts"))
parameterList.append(
("Primary Moc",
str(self.parametersPanel.pnlPrimaryMoc.Value.Metres) + "m"))
parameterList.append(
("Construction Type",
self.parametersPanel.cmbConstructionType.SelectedItem))
parameterList.append(
("MOCmultipiler", str(self.parametersPanel.mocSpinBox.value())))
if self.parametersPanel.cmbConstructionType.SelectedIndex == 0:
parameterList.append(
("Draw Waypoint Tolerance",
str(self.parametersPanel.chbDrawTolerance.Checked)))
parameterList.append(("Results / Checked Obstacles", "group"))
parameterList.append(("Checked Obstacles", "group"))
c = self.obstaclesModel.rowCount()
parameterList.append(("Number of Checked Obstacles", str(c)))
return parameterList
def uiStateInit(self):
self.ui.grbMostCritical.setVisible(False)
self.ui.grbResult_2.setVisible(False)
self.ui.btnUpdateQA.setVisible(False)
self.ui.btnUpdateQA_2.setVisible(False)
self.ui.frm_cmbObstSurface.setVisible(False)
self.ui.btnPDTCheck.setVisible(False)
self.ui.tabCtrlGeneral.removeTab(2)
self.ui.tabCtrlGeneral.removeTab(1)
self.ui.btnEvaluate.setVisible(False)
self.ui.btnConstruct.setVisible(False)
# self.ui.btnPDTCheck.clicked.connect(self.btnPDTCheck_Click)
return FlightPlanBaseDlg.uiStateInit(self)
# def btnPDTCheck_Click(self):
# pdtResultStr = MathHelper.pdtCheckResultToString(float(self.parametersPanel.txtIsa.text()), Altitude(float(self.parametersPanel.txtAltitude.text()), AltitudeUnits.FT), float(self.parametersPanel.txtIas.text()), float(self.parametersPanel.txtTime.text()))
#
# QMessageBox.warning(self, "PDT Check", pdtResultStr)
def btnEvaluate_Click(self):
# self.complexObstacleArea.ObstacleArea = None
#
# ObstacleTable.MocMultiplier = self.parametersPanel.mocSpinBox.value()
# self.obstaclesModel = TurnProtectionAndObstacleAssessmentObstacles(self.complexObstacleArea, self.parametersPanel.pnlPrimaryMoc.Value, self.parametersPanel.pnlAltitude.Value, self.manualPolygon )
FlightPlanBaseDlg.btnEvaluate_Click(self)
self.ui.btnLocate.setEnabled(True)
def btnConstruct_Click(self):
flag = FlightPlanBaseDlg.btnConstruct_Click(self)
if not flag:
return
def outputResultMethod(self):
self.manualPolygon = self.toolSelectByPolygon.polygonGeom
def manualEvent(self, index):
QgisHelper.ClearRubberBandInCanvas(define._canvas)
self.manualPolygon = None
if index != 0:
self.toolSelectByPolygon = RubberBandPolygon(define._canvas)
define._canvas.setMapTool(self.toolSelectByPolygon)
self.connect(self.toolSelectByPolygon, SIGNAL("outputResult"),
self.outputResultMethod)
else:
self.mapToolPan = QgsMapToolPan(define._canvas)
define._canvas.setMapTool(self.mapToolPan)
def initParametersPan(self):
ui = Ui_NpaOnFix()
self.parametersPanel = ui
FlightPlanBaseDlg.initParametersPan(self)
if self.dlgType != "NpaOnFix":
self.parametersPanel.pnlDistFixTolerance.Visible = False
self.parametersPanel.cmbAircraftCategory.Items = [
"A", "B", "C", "D", "E", "H", "Custom"
]
self.connect(self.parametersPanel.pnlAerodromeAltitude,
SIGNAL("editingFinished"), self.altitudeChanged)
self.connect(self.parametersPanel.pnlIas, SIGNAL("Event_0"),
self.altitudeChanged)
self.connect(self.parametersPanel.pnlTas, SIGNAL("Event_0"),
self.showMarkDaSoc)
self.connect(self.parametersPanel.pnlIsa, SIGNAL("editingFinished"),
self.altitudeChanged)
self.connect(self.parametersPanel.pnlEstimatedAltitude,
SIGNAL("Event_0"), self.pnlEstimatedAltitude_Event_0)
self.connect(self.parametersPanel.pnlEstimatedAltitude,
SIGNAL("editingFinished"), self.showMarkDaSoc)
self.connect(self.parametersPanel.cmbAircraftCategory,
SIGNAL("Event_0"), self.cmbAircraftCategory_Event_0)
# # self.connect(self.parametersPanel.cmbPhaseOfFlight, SIGNAL("Event_0"), self.cmbPhaseOfFlightChanged)
# # self.connect(self.parametersPanel.cmbSelectionMode, SIGNAL("Event_0"), self.manualEvent)
# self.connect(self.parametersPanel.pnlHeightLoss, SIGNAL("Event_0"), self.pnlHeightLoss_Event_0)
self.connect(self.parametersPanel.pnlDistFixTolerance,
SIGNAL("editingFinished"), self.showMarkDaSoc)
# self.connect(self.parametersPanel.pnlRDH, SIGNAL("editingFinished"), self.pnlRDH_Event_0)
self.connect(self.parametersPanel.pnlDistX, SIGNAL("Event_0"),
self.showMarkDaSoc)
# # self.connect(self.parametersPanel.cmbType2, SIGNAL("Event_0"), self.method_31)
#
self.connect(self.parametersPanel.pnlFafPosition,
SIGNAL("positionChanged"), self.calcRwyBearing)
self.connect(self.parametersPanel.pnlMaPtPosition,
SIGNAL("positionChanged"), self.calcRwyBearing)
self.connect(self.parametersPanel.pnlThrPosition,
SIGNAL("positionChanged"), self.showMarkDaSoc)
self.parametersPanel.pnlFafPosition.btnCalculater.clicked.connect(
self.pnlFafPosition_btnCalculater_clicked)
self.parametersPanel.pnlMaPtPosition.btnCalculater.clicked.connect(
self.pnlMaPtPosition_btnCalculater_clicked)
#
self.parametersPanel.cmbAircraftCategory.SelectedIndex = 0
# self.putAircraftSpeed()
self.altitudeChanged()
# self.putWithInHeightLoss()
self.calcSocAltitude()
def pnlFafPosition_btnCalculater_clicked(self):
self.gbFAWP = self.parametersPanel.pnlFafPosition
dlg = CalcDlg(self, RnavCommonWaypoint.FAWP,
self.parametersPanel.cmbAircraftCategory.SelectedIndex,
None, None, [
self.parametersPanel.pnlThrPosition.Point3d,
self.parametersPanel.pnlRwyEndPosition.Point3d, None
])
dlg.setWindowTitle("Calculate FAF")
dlg.groupBox_4.setVisible(False)
dlg.groupBox_5.setVisible(False)
dlg.resize(200, 100)
dlg.txtForm.setText("")
self.parameterCalcList = []
dlg.txtDistance.setEnabled(True)
self.annotationFAWP.show()
dlg.show()
def pnlMaPtPosition_btnCalculater_clicked(self):
self.gbMAWP = self.parametersPanel.pnlMaPtPosition
dlg = CalcDlg(self, RnavCommonWaypoint.MAWP,
self.parametersPanel.cmbAircraftCategory.SelectedIndex,
None, None, [
self.parametersPanel.pnlThrPosition.Point3d,
self.parametersPanel.pnlRwyEndPosition.Point3d, None
])
dlg.setWindowTitle("Calculate MAPt")
dlg.groupBox_4.setVisible(False)
dlg.groupBox_5.setVisible(False)
dlg.resize(200, 100)
dlg.txtForm.setText("")
self.parameterCalcList = []
dlg.txtDistance.setEnabled(True)
self.annotationMAPt.show()
dlg.show()
def putDistances(self):
try:
point3dThr = self.parametersPanel.pnlThrPosition.Point3d
point3dFaf = self.parametersPanel.pnlFafPosition.Point3d
point3dMapt = self.parametersPanel.pnlMaPtPosition.Point3d
self.parametersPanel.pnlDistOfFafMapt.Value = Distance(
MathHelper.calcDistance(point3dFaf, point3dMapt))
inboundTrackRad = Unit.ConvertDegToRad(
self.parametersPanel.pnlInboundTrack.Value)
inboundTrack180Rad = MathHelper.smethod_4(inboundTrackRad +
math.pi)
speedTas = self.parametersPanel.pnlTas.Value
xDist = self.calcDAndXDistance(speedTas, Speed(10), 15)
self.parametersPanel.pnlDistX.Caption = "X(10kts/15s)"
if self.parametersPanel.cmbAircraftCategory.SelectedIndex == 5:
xDist = self.calcDAndXDistance(speedTas, Speed(10), 5)
self.parametersPanel.pnlDistX.Caption = "X(10kts/5s)"
dDist = self.calcDAndXDistance(speedTas, Speed(10), 3)
fixTolerance = 0.0
if self.dlgType == "NpaOnFix":
fixTolerance = self.parametersPanel.pnlDistFixTolerance.Value.Metres
socMaptDistMeters = fixTolerance + dDist + xDist
socThrDistMeters = MathHelper.calcDistance(
point3dMapt, point3dThr) - socMaptDistMeters
sockBearing = inboundTrackRad
self.socPoint3d = MathHelper.distanceBearingPoint(
point3dMapt, sockBearing,
socMaptDistMeters).smethod_167(self.calcSocAltitude())
self.parametersPanel.pnlDistD.Value = Distance(dDist)
self.parametersPanel.pnlDistX.Value = Distance(xDist)
self.parametersPanel.pnlDistOfMaptSoc.Value = Distance(
socMaptDistMeters)
self.parametersPanel.pnlDistOfSocThr.Value = Distance(
MathHelper.calcDistance(self.socPoint3d, point3dThr)
) #MathHelper.calcDistance(point3dThr, self.daPoint3d))
# self.parametersPanel.pnlDistOfFafMapt.Value = Distance(MathHelper.calcDistance(point3dFaf, point3dMapt))#MathHelper.calcDistance(point3dThr, self.socPoint3d))
self.parametersPanel.pnlDistOfMaptThr.Value = Distance(
MathHelper.calcDistance(point3dMapt, point3dThr))
except:
pass
def calcDAndXDistance(self, speed_0, speed_1, double_0):
return Distance((speed_0 + speed_1).MetresPerSecond * double_0).Metres
def showMarkDaSoc(self):
try:
flag = FlightPlanBaseDlg.btnConstruct_Click(self)
self.putDistances()
point3dMapt = self.parametersPanel.pnlMaPtPosition.Point3d
socLayer = AcadHelper.createVectorLayer(
"SOC_MAPt_" + self.surfaceType, QGis.Point)
AcadHelper.setGeometryAndAttributesInLayer(socLayer,
self.socPoint3d, False,
{"Caption": "SOC"})
AcadHelper.setGeometryAndAttributesInLayer(socLayer, point3dMapt,
False,
{"Caption": "MAPt"})
QgisHelper.appendToCanvas(define._canvas, [socLayer],
self.surfaceType)
palSetting = QgsPalLayerSettings()
palSetting.readFromLayer(socLayer)
palSetting.enabled = True
palSetting.fieldName = "Caption"
palSetting.isExpression = True
palSetting.placement = QgsPalLayerSettings.AroundPoint
palSetting.setDataDefinedProperty(QgsPalLayerSettings.Size, True,
True, '8', "")
palSetting.writeToLayer(socLayer)
self.resultLayerList = [socLayer]
return socLayer
except:
pass
def pnlEstimatedAltitude_Event_0(self):
self.calcSocAltitude()
def cmbAircraftCategory_Event_0(self):
self.putAircraftSpeed()
self.showMarkDaSoc()
def calcSocAltitude(self):
# val = self.parametersPanel.pnlEstimatedAltitude.Value.Metres - self.parametersPanel.pnlHeightLoss.Value.Metres
self.parametersPanel.pnlSocAltitude.Value = Altitude(
self.parametersPanel.pnlEstimatedAltitude.Value.Metres)
return self.parametersPanel.pnlEstimatedAltitude.Value.Metres
def altitudeChanged(self):
self.parametersPanel.pnlWind.setAltitude(
self.parametersPanel.pnlAerodromeAltitude.Value)
try:
self.parametersPanel.pnlTas.Value = Speed.smethod_0(
self.parametersPanel.pnlIas.Value,
self.parametersPanel.pnlIsa.Value,
self.parametersPanel.pnlAerodromeAltitude.Value)
self.showMarkDaSoc()
except:
raise ValueError("Value Invalid")
def WPT2Layer(self):
mapUnits = define._canvas.mapUnits()
if define._mapCrs == None:
if mapUnits == QGis.Meters:
resultLayer = QgsVectorLayer(
"Point?crs=EPSG:32633", "WPT_" +
self.surfaceType.replace(" ", "_").replace("-", "_"),
"memory")
else:
resultLayer = QgsVectorLayer(
"Point?crs=EPSG:4326", "WPT_" +
self.surfaceType.replace(" ", "_").replace("-", "_"),
"memory")
else:
resultLayer = QgsVectorLayer(
"Point?crs=%s" % define._mapCrs.authid(),
"WPT_" + self.surfaceType.replace(" ", "_").replace("-", "_"),
"memory")
shpPath = ""
if define.obstaclePath != None:
shpPath = define.obstaclePath
elif define.xmlPath != None:
shpPath = define.xmlPath
else:
shpPath = define.appPath
er = QgsVectorFileWriter.writeAsVectorFormat(
resultLayer,
shpPath + "/" + "RnavTurningSegmentAnalyserWpt" + ".shp", "utf-8",
resultLayer.crs())
resultLayer = QgsVectorLayer(
shpPath + "/" + "RnavTurningSegmentAnalyserWpt" + ".shp",
"WPT_RnavTurningSegmentAnalyser", "ogr")
fieldName = "CATEGORY"
resultLayer.dataProvider().addAttributes(
[QgsField(fieldName, QVariant.String)])
resultLayer.startEditing()
fields = resultLayer.pendingFields()
i = 1
feature = QgsFeature()
feature.setFields(fields)
feature.setGeometry(
QgsGeometry.fromPoint(self.parametersPanel.pnlWaypoint1.Point3d))
feature.setAttribute(fieldName, "Waypoint1")
pr = resultLayer.dataProvider()
pr.addFeatures([feature])
# resultLayer.addFeature(feature)
feature.setGeometry(
QgsGeometry.fromPoint(self.parametersPanel.pnlWaypoint2.Point3d))
feature.setAttribute(fieldName, "Waypoint2")
pr = resultLayer.dataProvider()
pr.addFeatures([feature])
# resultLayer.addFeature(feature)
resultLayer.commitChanges()
renderCatFly = None
if self.parametersPanel.cmbType1.SelectedIndex == 1:
'''FlyOver'''
symbolFlyOver = QgsSymbolV2.defaultSymbol(
resultLayer.geometryType())
symbolFlyOver.deleteSymbolLayer(0)
svgSymLayer = QgsSvgMarkerSymbolLayerV2("Resource/flyover.svg",
10.0, 0.0)
symbolFlyOver.appendSymbolLayer(svgSymLayer)
renderCatFly = QgsRendererCategoryV2(0, symbolFlyOver, "Fly Over")
elif self.parametersPanel.cmbType1.SelectedIndex == 0:
'''FlyBy'''
symbolFlyBy = QgsSymbolV2.defaultSymbol(resultLayer.geometryType())
symbolFlyBy.deleteSymbolLayer(0)
svgSymLayer = QgsSvgMarkerSymbolLayerV2("Resource/flyby.svg", 10.0,
0.0)
symbolFlyBy.appendSymbolLayer(svgSymLayer)
renderCatFly = QgsRendererCategoryV2(0, symbolFlyBy, "Fly By")
else:
return None
WPT_EXPRESION = "CASE WHEN \"CATEGORY\" = 'Waypoint1' THEN 0 " + \
"END"
symRenderer = QgsCategorizedSymbolRendererV2(WPT_EXPRESION,
[renderCatFly])
resultLayer.setRendererV2(symRenderer)
return resultLayer
def putAircraftSpeed(self):
speedTas = self.parametersPanel.pnlTas.Value
if self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.H:
xDist = self.calcDAndXDistance(speedTas, Speed(10), 5)
self.parametersPanel.pnlDistX.Caption = "X(10kts/5s)"
self.parametersPanel.pnlDistX.Value = Distance(xDist)
else:
xDist = self.calcDAndXDistance(speedTas, Speed(10), 15)
self.parametersPanel.pnlDistX.Caption = "X(10kts/15s)"
self.parametersPanel.pnlDistX.Value = Distance(xDist)
if self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.A:
self.parametersPanel.pnlIas.Value = Speed(100)
# self.parametersPanel.pnlIas.Value = Speed(90)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.B:
self.parametersPanel.pnlIas.Value = Speed(130)
# self.parametersPanel.pnlIas.Value = Speed(120)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.C:
self.parametersPanel.pnlIas.Value = Speed(160)
# self.parametersPanel.pnlIas.Value = Speed(140)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.D:
self.parametersPanel.pnlIas.Value = Speed(185)
# self.parametersPanel.pnlIas.Value = Speed(165)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.E:
self.parametersPanel.pnlIas.Value = Speed(230)
# self.parametersPanel.pnlIas.Value = Speed(210)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.Custom:
# self.parametersPanel.pnlIas.Value = self.customIas
self.parametersPanel.pnlIas.Value = Speed(185)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.H:
# self.parametersPanel.pnlIas.Value = self.customIas
self.parametersPanel.pnlIas.Value = Speed(90)
self.parametersPanel.pnlIas.Enabled = self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.Custom
# coding: utf-8
from PyQt4.QtCore import QSizeF
from PyQt4.QtGui import QColor, QTextDocument
from qgis.core import QgsPoint
from qgis.gui import QgsTextAnnotationItem
from qgis.utils import iface
canvas = iface.mapCanvas()
text_annotation_item = QgsTextAnnotationItem(canvas)
X, Y = float(3), float(45)
point = QgsPoint(X, Y)
text_annotation_item.setMapPosition(point)
text_annotation_item.setFrameSize(QSizeF(300, 200))
text_annotation_item.setFrameColor(QColor(0, 255, 0))
text_annotation_item.setFrameBackgroundColor(QColor(128, 128, 128))
text_document = QTextDocument()
html_content = "<b>New annotation</b>"
font_color, font_family, font_size = "#123456", "Times New Roman", 16
text_document.setHtml('<font style="color:' + font_color + "; font-family:" +
font_family + "; font-size: " + str(font_size) + 'px">' +
html_content + "</font>")
text_annotation_item.setDocument(text_document)
canvas.refresh()
# Then remove
# canvas.scene().removeItem(text_annotation_item)
def wplaceAnnotationsButton_click(self):
annotations = self.getSelectedAnnotations()
for anno in annotations:
annoData = anno.data(1)
annotation = QgsTextAnnotationItem(self.iface.mapCanvas())
#Make data accessible from annotation
annotation.setData(1, annoData)
doc = annotation.document()
#"layer": self.getLayer(),
#"srid": crs.postgisSrid(),
#"label": label[0:256] ,
#"content": annotation.document().toHtml().replace("'","''"),
doc.setHtml(annoData.get('content', None))
annotation.setDocument(doc)
#"frame_color":annotation.frameColor().name(),
color = QColor()
color.setNamedColor(annoData.get('frame_color'))
annotation.setFrameColor(color)
#"bg_color": annotation.frameBackgroundColor().name(),
color = QColor()
color.setNamedColor(annoData.get('bg_color'))
annotation.setFrameBackgroundColor(color)
#"frame_width": frame_size.width(),
#"frame_height": frame_size.height(),
size = QSizeF()
size.setWidth(annoData.get('frame_width'))
size.setHeight(annoData.get('frame_height'))
annotation.setFrameSize(size)
#"frame_border_width": annotation.frameBorderWidth(),
width = float(annoData.get('frame_border_width'))
annotation.setFrameBorderWidth(width)
#"map_position_x": map_position_x,
#"map_position_y": map_position_y,
map_position_x = float(annoData.get('map_position_x'))
map_position_y = float(annoData.get('map_position_y'))
annotation.setMapPosition(QgsPoint(map_position_x, map_position_y))
#"offset_x": ref_offset.x(),
#"offset_y": ref_offset.y(),
offset_x = float(annoData.get('offset_x'))
offset_y = float(annoData.get('offset_y'))
annotation.setOffsetFromReferencePoint(QPointF(offset_x, offset_y))
#"marker_symbol": json.dumps(self.dumpMarkerSymbol(marker))
marker_symbol = annoData.get('marker_symbol')
new_marker_symbol = QgsMarkerSymbolV2()
#'color':marker.color().name(),
color = QColor()
color.setNamedColor(marker_symbol.get('color'))
new_marker_symbol.setColor(color)
#'alpha':marker.alpha(),
alpha = float(marker_symbol.get('alpha'))
new_marker_symbol.setAlpha(alpha)
#'output_unit': marker.outputUnit(),
output_unit = marker_symbol.get('output_unit')
new_marker_symbol.setOutputUnit(output_unit)
#'angle': marker.angle(),
angle = float(marker_symbol.get('angle'))
new_marker_symbol.setAngle(angle)
#'size': marker.size(),
size = float(marker_symbol.get('size'))
new_marker_symbol.setSize(size)
#'size_unit': marker.sizeUnit(),
size_unit = marker_symbol.get('size_unit')
new_marker_symbol.setSizeUnit(size_unit)
#'symbol_layers': [self.dumpSymbolLayer(layer) for layer in marker.symbolLayers()]
for properties in marker_symbol.get('symbol_layers'):
print properties
#properties = json.loads(properties)
new_symbol_layer = QgsSimpleMarkerSymbolLayerV2()
new_symbol_layer.restoreDataDefinedProperties(properties)
new_marker_symbol.appendSymbolLayer(new_symbol_layer)
annotation.setMarkerSymbol(new_marker_symbol)
def setupUi(self, Form):
Form.setObjectName(("Form"))
Form.resize(473, 580)
font = QtGui.QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
Form.setFont(font)
self.aprAnnotation = QgsTextAnnotationItem(define._canvas)
self.aprAnnotation.setDocument(QtGui.QTextDocument("ARP"))
self.aprAnnotation.setFrameSize(QtCore.QSizeF(30, 20))
self.aprAnnotation.hide()
self.thrAnnotation = QgsTextAnnotationItem(define._canvas)
self.thrAnnotation.setDocument(QtGui.QTextDocument("THR"))
self.thrAnnotation.setFrameSize(QtCore.QSizeF(30, 20))
self.thrAnnotation.hide()
self.vlForm = QtGui.QVBoxLayout(Form)
self.vlForm.setObjectName(("vlForm"))
self.vlForm.setSpacing(0)
self.vlForm.setMargin(0)
self.pnlPositions = QtGui.QFrame(Form)
self.pnlPositions.setObjectName(("pnlPositions"))
self.hl_pnlPositions = QtGui.QVBoxLayout(self.pnlPositions)
self.hl_pnlPositions.setObjectName(("hl_pnlPositions"))
self.hl_pnlPositions.setMargin(0)
self.cmbAerodrome = ComboBoxPanel(self.pnlPositions, True)
self.cmbAerodrome.Caption = "Aerodrome"
self.cmbAerodrome.LabelWidth = 120
self.hl_pnlPositions.addWidget(self.cmbAerodrome)
self.cmbRwyDir = ComboBoxPanel(self.pnlPositions, True)
self.cmbRwyDir.Caption = "Runway Direction"
self.cmbRwyDir.LabelWidth = 120
self.cmbRwyDir.Width = 120
self.hl_pnlPositions.addWidget(self.cmbRwyDir)
self.gbAerodrome = QtGui.QGroupBox(Form)
self.gbAerodrome.setObjectName("gbAerodrome")
self.gbAerodrome.setTitle("Aerodrome")
self.vl_gbAerodrome = QtGui.QVBoxLayout(self.gbAerodrome)
self.vl_gbAerodrome.setObjectName("vl_gbAerodrome")
self.pnlArp = PositionPanel(self.gbAerodrome, self.aprAnnotation)
self.pnlArp.groupBox.setTitle("Reference Point (ARP)")
self.pnlArp.btnCalculater.hide()
self.vl_gbAerodrome.addWidget(self.pnlArp)
self.pnlMinTemp = NumberBoxPanel(self.gbAerodrome)
self.pnlMinTemp.CaptionUnits = define._degreeStr
self.pnlMinTemp.Caption = "Minimum Temperature"
self.pnlMinTemp.Value = -15
self.vl_gbAerodrome.addWidget(self.pnlMinTemp)
self.hl_pnlPositions.addWidget(self.gbAerodrome)
self.gbRunway = QtGui.QGroupBox(Form)
self.gbRunway.setObjectName("gbRunway")
self.gbRunway.setTitle("Runway")
self.vl_gbRunway = QtGui.QVBoxLayout(self.gbRunway)
self.vl_gbRunway.setObjectName("vl_gbRunway")
self.pnlThr = PositionPanel(self.gbRunway, self.thrAnnotation)
self.pnlThr.groupBox.setTitle("Threshold Position")
self.pnlThr.btnCalculater.hide()
self.vl_gbRunway.addWidget(self.pnlThr)
self.pnlThrEnd = PositionPanel(self.gbRunway, self.thrAnnotation)
self.pnlThrEnd.groupBox.setTitle("Runway End Position")
self.pnlThrEnd.btnCalculater.hide()
self.vl_gbRunway.addWidget(self.pnlThrEnd)
self.pnlThrEnd.Visible = False
self.pnlRwyDir = TrackRadialBoxPanel(self.gbRunway)
self.pnlRwyDir.Caption = "Direction"
self.pnlRwyDir.LabelWidth = 70
self.vl_gbRunway.addWidget(self.pnlRwyDir)
self.hl_pnlPositions.addWidget(self.gbRunway)
self.vlForm.addWidget(self.pnlPositions)
self.gbParameters = QtGui.QGroupBox(Form)
font = QtGui.QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.gbParameters.setFont(font)
self.gbParameters.setObjectName(("gbParameters"))
self.gbParameters.setTitle("Parameters")
self.vl_gbParameters = QtGui.QVBoxLayout(self.gbParameters)
self.vl_gbParameters.setObjectName(("vl_gbParameters"))
self.pnlOCAH = OCAHPanel(self.gbParameters)
self.pnlOCAH.Caption = "Intermediate Segment"
self.pnlOCAH.Value = Altitude(2000, AltitudeUnits.FT)
self.pnlOCAH.LabelWidth = 200
self.vl_gbParameters.addWidget(self.pnlOCAH)
self.pnlMocI = AltitudeBoxPanel(self.gbParameters)
self.pnlMocI.CaptionUnits = "m"
self.pnlMocI.Caption = "Intermediate Segment MOC"
self.pnlMocI.Value = Altitude(150)
self.vl_gbParameters.addWidget(self.pnlMocI)
self.pnlRDH = AltitudeBoxPanel(self.gbParameters)
self.pnlRDH.CaptionUnits = "m"
self.pnlRDH.Caption = "RDH at THR"
self.pnlRDH.Value = Altitude(15)
self.vl_gbParameters.addWidget(self.pnlRDH)
self.pnlVPA = ComboBoxPanel(self.gbParameters)
self.pnlVPA.Caption = "Vertical Path Angle [VPA]"
# self.pnlVPA.comboBox.setToolTip()
self.vl_gbParameters.addWidget(self.pnlVPA)
self.lblAbove35 = QtGui.QLabel(self.gbParameters)
self.lblAbove35.setText(
QtCore.QString("A procedure with a promulgated VPA exceeding 3.5")
+ unicode("°", "utf-8") + QtCore.QString(
" is a non-standard procedure.\nIt shall be subject to an aeronautical study and will require special approval \n by the national competent authority (PANS-OPS Part III, Section 3, Chapter 4, Par. 4.2.1.3)"
))
self.vl_gbParameters.addWidget(self.lblAbove35)
self.pnlThrFafDist = DistanceBoxPanel(self.gbParameters,
DistanceUnits.NM)
self.pnlThrFafDist.Caption = "THR to FAWP Distance"
self.pnlThrFafDist.Value = Distance(5, DistanceUnits.NM)
self.vl_gbParameters.addWidget(self.pnlThrFafDist)
self.pnlAcCat = ComboBoxPanel(self.gbParameters)
self.pnlAcCat.Caption = "Aircraft Category"
self.vl_gbParameters.addWidget(self.pnlAcCat)
self.pnlIas = SpeedBoxPanel(self.gbParameters, SpeedUnits.KTS)
self.pnlIas.Caption = "Max. IAS"
self.pnlIas.Value = Speed(185)
self.vl_gbParameters.addWidget(self.pnlIas)
self.pnlIasAtThr = SpeedBoxPanel(self.gbParameters, SpeedUnits.KTS)
self.pnlIasAtThr.Caption = "Max. IAS at THR"
self.pnlIasAtThr.Value = Speed(165)
self.vl_gbParameters.addWidget(self.pnlIasAtThr)
self.pnlHL = AltitudeBoxPanel(self.gbParameters)
self.pnlHL.CaptionUnits = "m"
self.pnlHL.Caption = "Height Loss"
self.pnlHL.Value = Altitude(49)
self.vl_gbParameters.addWidget(self.pnlHL)
self.pnlTC = AltitudeBoxPanel(self.gbParameters)
self.pnlTC.CaptionUnits = "m"
self.pnlTC.Caption = "Temperature Correction"
self.pnlTC.Value = Altitude(0)
self.vl_gbParameters.addWidget(self.pnlTC)
self.tableLayoutPanel1 = QtGui.QFrame(self.gbParameters)
self.tableLayoutPanel1.setObjectName("tableLayoutPanel1")
self.vl_tableLayoutPanel1 = QtGui.QVBoxLayout(self.tableLayoutPanel1)
self.vl_tableLayoutPanel1.setObjectName("vl_tableLayoutPanel1")
self.vl_tableLayoutPanel1.setSpacing(0)
self.vl_tableLayoutPanel1.setMargin(0)
self.upFrame = QtGui.QFrame(self.tableLayoutPanel1)
self.upFrame.setObjectName("upFrame")
sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Fixed,
QtGui.QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.upFrame.sizePolicy().hasHeightForWidth())
self.upFrame.setSizePolicy(sizePolicy)
self.hl_upFrame = QtGui.QHBoxLayout(self.upFrame)
self.hl_upFrame.setObjectName("hl_upFrame")
self.hl_upFrame.setMargin(0)
self.cmbTermination = ComboBoxPanel(self.upFrame)
self.cmbTermination.Caption = "APV Segment Termination"
self.cmbTermination.comboBox.setMinimumWidth(80)
self.hl_upFrame.addWidget(self.cmbTermination)
self.pnlTerminationDist = DistanceBoxPanel(self.upFrame,
DistanceUnits.NM)
self.pnlTerminationDist.Caption = "Dist."
self.pnlTerminationDist.Value = Distance(5, DistanceUnits.NM)
self.pnlTerminationDist.LabelWidth = 50
self.hl_upFrame.addWidget(self.pnlTerminationDist)
self.vl_tableLayoutPanel1.addWidget(self.upFrame)
self.downFrame = QtGui.QFrame(self.tableLayoutPanel1)
self.downFrame.setObjectName("downFrame")
sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Fixed,
QtGui.QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.downFrame.sizePolicy().hasHeightForWidth())
self.downFrame.setSizePolicy(sizePolicy)
self.hl_downFrame = QtGui.QHBoxLayout(self.downFrame)
self.hl_downFrame.setObjectName("hl_downFrame")
self.hl_downFrame.setMargin(0)
self.cmbMAPt = ComboBoxPanel(self.downFrame)
self.cmbMAPt.Caption = "Missed Approach Point"
self.cmbMAPt.comboBox.setMinimumWidth(80)
self.hl_downFrame.addWidget(self.cmbMAPt)
self.pnlMAPtDist = DistanceBoxPanel(self.downFrame, DistanceUnits.NM)
self.pnlMAPtDist.Caption = "Dist."
# self.pnlMAPtDist.Value = Distance(5, DistanceUnits.NM)
self.pnlMAPtDist.LabelWidth = 50
self.hl_downFrame.addWidget(self.pnlMAPtDist)
self.vl_tableLayoutPanel1.addWidget(self.downFrame)
self.vl_gbParameters.addWidget(self.tableLayoutPanel1)
self.pnlMACG = NumberBoxPanel(self.gbParameters)
self.pnlMACG.CaptionUnits = "%"
self.pnlMACG.Caption = "Missed Approach Climb Gradient"
self.pnlMACG.Value = 2.5
self.vl_gbParameters.addWidget(self.pnlMACG)
self.pnlMocMA = AltitudeBoxPanel(self.gbParameters)
self.pnlMocMA.CaptionUnits = "m"
self.pnlMocMA.Caption = "Missed Approach MOC"
self.pnlMocMA.Value = Altitude(30)
self.vl_gbParameters.addWidget(self.pnlMocMA)
self.pnlEvalMethodMA = ComboBoxPanel(self.gbParameters)
self.pnlEvalMethodMA.Caption = "Missed Approach Evaluation"
self.vl_gbParameters.addWidget(self.pnlEvalMethodMA)
self.pnlConstructionType = ComboBoxPanel(self.gbParameters)
self.pnlConstructionType.Caption = "Construction Type"
self.vl_gbParameters.addWidget(self.pnlConstructionType)
self.vlForm.addWidget(self.gbParameters)
QtCore.QMetaObject.connectSlotsByName(Form)
class PaIlsDlg(FlightPlanBaseDlg):
def __init__(self, parent, dlgType):
FlightPlanBaseDlg.__init__(self, parent)
self.dlgType = dlgType
self.setObjectName("PaIlsDlg")
self.surfaceType = self.dlgType
self.initParametersPan()
self.setWindowTitle(self.dlgType)
self.resize(540, 600)
QgisHelper.matchingDialogSize(self, 720, 700)
self.surfaceList = None
self.manualPolygon = None
self.mapToolPan = None
self.toolSelectByPolygon = None
self.accepted.connect(self.closed)
self.rejected.connect(self.closed)
self.wptLayer = None
self.arpFeatureArray = []
self.currentLayer = define._canvas.currentLayer()
self.rwyFeatureArray = []
self.rwyEndPosition = None
self.initAerodromeAndRwyCmb()
self.socRubber = None
self.socAnnotation = QgsTextAnnotationItem(define._canvas)
self.socAnnotation.setDocument(QTextDocument(Captions.SOC))
self.socAnnotation.setFrameBackgroundColor(Qt.white)
self.socAnnotation.setFrameSize(QSizeF(30, 20))
self.socAnnotation.setFrameColor(Qt.magenta)
self.socAnnotation.hide()
self.socPoint3d = None
self.daRubber = None
self.daAnnotation = QgsTextAnnotationItem(define._canvas)
self.daAnnotation.setDocument(QTextDocument(Captions.DA))
self.daAnnotation.setFrameBackgroundColor(Qt.white)
self.daAnnotation.setFrameSize(QSizeF(30, 20))
self.daAnnotation.setFrameColor(Qt.magenta)
self.daAnnotation.hide()
self.daPoint3d = None
self.annotationFAWP = self.parametersPanel.pnlFapPosition.annotation
self.surfaceType = self.dlgType
def initAerodromeAndRwyCmb(self):
if self.currentLayer != None and self.currentLayer.isValid() and isinstance(self.currentLayer, QgsVectorLayer):
self.arpFeatureArray = self.aerodromeAndRwyCmbFill(self.currentLayer, self.parametersPanel.cmbAerodrome, None, self.parametersPanel.cmbRwyDir)
self.calcRwyBearing()
def calcRwyBearing(self):
try:
point3dThr = self.parametersPanel.pnlThrPosition.Point3d
point3dFap = self.parametersPanel.pnlFapPosition.Point3d
if point3dThr == None:
self.parametersPanel.pnlInboundTrack.Value = 0.0
return
if point3dFap == None:
self.parametersPanel.pnlInboundTrack.Value = round(Unit.ConvertRadToDeg(MathHelper.getBearing(point3dThr, self.parametersPanel.pnlRwyEndPosition.Point3d)), 4)
point3dFap = self.rwyEndPosition
else:
self.parametersPanel.pnlInboundTrack.Value = round(Unit.ConvertRadToDeg(MathHelper.getBearing(point3dFap, point3dThr)), 4)
self.showMarkDaSoc()
except:
pass
# self.ui.horizontalLayout_6.addWidget(self.ui.frame_3)
def aerodromeAndRwyCmbFill(self, layer, aerodromeCmbObj, aerodromePositionPanelObj, rwyDirCmbObj = None):
idx = layer.fieldNameIndex('Type')
idxName = layer.fieldNameIndex('Name')
idxLat = layer.fieldNameIndex('Latitude')
idxLong = layer.fieldNameIndex('Longitude')
idxAltitude = layer.fieldNameIndex('Altitude')
arpList = []
arpFeatureList = []
if idx >= 0:
featIter = layer.getFeatures()
for feat in featIter:
attrValue = feat.attributes()[idx].toString()
attrValue = QString(attrValue)
attrValue = attrValue.replace(" ", "")
attrValue = attrValue.toUpper()
if attrValue == "AERODROMEREFERENCEPOINT":
arpList.append(attrValue)
arpFeatureList.append(feat)
if len(arpList) != 0:
i = -1
attrValueList = []
for feat in arpFeatureList:
attrValue = feat.attributes()[idxName].toString()
items = attrValueList
if len(items) != 0:
existFlag = False
for item in items:
if item == attrValue:
existFlag = True
if existFlag:
continue
attrValueList.append(attrValue)
attrValueList.sort()
# attrValueList.insert(0, "")
aerodromeCmbObj.Items = attrValueList
aerodromeCmbObj.SelectedIndex = 0
# if idxAttributes
for feat in arpFeatureList:
attrValue = feat.attributes()[idxName].toString()
if attrValue != aerodromeCmbObj.SelectedItem:
continue
attrValue = feat.attributes()[idxLat].toDouble()
lat = attrValue[0]
attrValue = feat.attributes()[idxLong].toDouble()
long = attrValue[0]
attrValue = feat.attributes()[idxAltitude].toDouble()
alt = attrValue[0]
# aerodromePositionPanelObj.Point3d = Point3D(long, lat, alt)
self.connect(aerodromeCmbObj, SIGNAL("Event_0"), self.aerodromeCmbObj_Event_0)
break
if rwyDirCmbObj != None:
idxAttr = layer.fieldNameIndex('Attributes')
if idxAttr >= 0:
rwyFeatList = []
featIter = layer.getFeatures()
rwyDirCmbObjItems = []
for feat in featIter:
attrValue = feat.attributes()[idxAttr].toString()
if attrValue == aerodromeCmbObj.SelectedItem:
attrValue = feat.attributes()[idxName].toString()
s = attrValue.replace(" ", "")
compStr = s.left(6).toUpper()
if compStr == "THRRWY":
valStr = s.right(s.length() - 6)
rwyDirCmbObjItems.append(aerodromeCmbObj.SelectedItem + " RWY " + valStr)
rwyFeatList.append(feat)
rwyDirCmbObjItems.sort()
rwyDirCmbObj.Items = rwyDirCmbObjItems
self.connect(rwyDirCmbObj, SIGNAL("Event_0"), self.rwyDirCmbObj_Event_0)
self.rwyFeatureArray = rwyFeatList
self.rwyDirCmbObj_Event_0()
self.aerodromeCmbObj_Event_0()
return arpFeatureList
def rwyDirCmbObj_Event_0(self):
if len(self.rwyFeatureArray) == 0:
self.calcRwyBearing()
return
idxName = self.currentLayer.fieldNameIndex('Name')
idxLat = self.currentLayer.fieldNameIndex('Latitude')
idxLong = self.currentLayer.fieldNameIndex('Longitude')
idxAltitude = self.currentLayer.fieldNameIndex('Altitude')
idxAttr = self.currentLayer.fieldNameIndex('Attributes')
# rwyFeatList = []
featIter = self.currentLayer.getFeatures()
# for feat in featIter:
# attrValue = feat.attributes()[idxAttr].toString()
# if attrValue == self.cmbAerodrome.SelectedItem:
# attrValue = feat.attributes()[idxName].toString()
# s = attrValue.replace(" ", "")
# compStr = s.left(6).toUpper()
# if compStr == "THRRWY":
# valStr = s.right(s.length() - 6)
# rwyFeatList.append(feat)
for feat in self.rwyFeatureArray:
attrValue = feat.attributes()[idxName].toString()
attrValueStr = QString(attrValue)
attrValueStr = attrValueStr.replace(" ", "").right(attrValueStr.length() - 3)
itemStr = self.parametersPanel.cmbRwyDir.SelectedItem
itemStr = QString(itemStr)
itemStr = itemStr.replace(" ", "").right(itemStr.length() - 4)
if attrValueStr != itemStr:
continue
latAttrValue = feat.attributes()[idxLat].toDouble()
lat = latAttrValue[0]
longAttrValue = feat.attributes()[idxLong].toDouble()
long = longAttrValue[0]
altAttrValue = feat.attributes()[idxAltitude].toDouble()
alt = altAttrValue[0]
self.parametersPanel.pnlThrPosition.Point3d = Point3D(long, lat, alt)
valStr = None
if attrValue.right(1).toUpper() =="L" or attrValue.right(1).toUpper() =="R":
s = attrValue.left(attrValue.length() - 1)
valStr = s.right(2)
else:
valStr = attrValue.right(2)
val = int(valStr)
val += 18
if val > 36:
val -= 36
newValStr = None
if len(str(val)) == 1:
newValStr = "0" + str(val)
else:
newValStr = str(val)
otherAttrValue = attrValue.replace(valStr, newValStr)
ss = otherAttrValue.right(1)
if ss.toUpper() == "L":
otherAttrValue = otherAttrValue.left(otherAttrValue.length() - 1) + "R"
elif ss.toUpper() == "R":
otherAttrValue = otherAttrValue.left(otherAttrValue.length() - 1) + "L"
for feat in self.rwyFeatureArray:
attrValue = feat.attributes()[idxName].toString()
if attrValue != otherAttrValue:
continue
latAttrValue = feat.attributes()[idxLat].toDouble()
lat = latAttrValue[0]
longAttrValue = feat.attributes()[idxLong].toDouble()
long = longAttrValue[0]
altAttrValue = feat.attributes()[idxAltitude].toDouble()
alt = altAttrValue[0]
self.parametersPanel.pnlRwyEndPosition.Point3d = Point3D(long, lat, alt)
break
break
self.calcRwyBearing()
def aerodromeCmbObj_Event_0(self):
if len(self.arpFeatureArray) == 0:
return
# self.parametersPanel.pnlArp.Point3d = None
self.parametersPanel.pnlRwyEndPosition.Point3d = None
self.parametersPanel.pnlThrPosition.Point3d = None
idxName = self.currentLayer.fieldNameIndex('Name')
idxLat = self.currentLayer.fieldNameIndex('Latitude')
idxLong = self.currentLayer.fieldNameIndex('Longitude')
idxAltitude = self.currentLayer.fieldNameIndex('Altitude')
self.rwyFeatureArray = []
# if idxAttributes
for feat in self.arpFeatureArray:
attrValue = feat.attributes()[idxName].toString()
if attrValue != self.parametersPanel.cmbAerodrome.SelectedItem:
continue
attrValue = feat.attributes()[idxLat].toDouble()
lat = attrValue[0]
attrValue = feat.attributes()[idxLong].toDouble()
long = attrValue[0]
attrValue = feat.attributes()[idxAltitude].toDouble()
alt = attrValue[0]
# self.parametersPanel.pnlArp.Point3d = Point3D(long, lat, alt)
break
idxAttr = self.currentLayer.fieldNameIndex('Attributes')
if idxAttr >= 0:
self.parametersPanel.cmbRwyDir.Clear()
rwyFeatList = []
featIter = self.currentLayer.getFeatures()
for feat in featIter:
attrValue = feat.attributes()[idxAttr].toString()
if attrValue == self.parametersPanel.cmbAerodrome.SelectedItem:
attrValue = feat.attributes()[idxName].toString()
s = attrValue.replace(" ", "")
compStr = s.left(6).toUpper()
if compStr == "THRRWY":
valStr = s.right(s.length() - 6)
self.parametersPanel.cmbRwyDir.Add(self.parametersPanel.cmbAerodrome.SelectedItem + " RWY " + valStr)
rwyFeatList.append(feat)
self.rwyFeatureArray = rwyFeatList
self.rwyDirCmbObj_Event_0()
def closed(self):
if self.mapToolPan != None:
self.mapToolPan.deactivate()
if self.toolSelectByPolygon != None:
self.toolSelectByPolygon.deactivate()
def initObstaclesModel(self):
self.obstaclesModel.MocMultiplier = self.parametersPanel.mocSpinBox.value()
return FlightPlanBaseDlg.initObstaclesModel(self)
def exportResult(self):
result, resultHideColumnNames = FlightPlanBaseDlg.exportResult(self)
if not result:
return
filePathDir = QFileDialog.getSaveFileName(self, "Export Obstacle Data", QCoreApplication.applicationDirPath (),"ExportObstaclefiles(*.xml)")
if filePathDir == "":
return
parameterList = self.getParameterList()
DataHelper.saveExportResult(filePathDir, self.surfaceType, self.ui.tblObstacles, None, parameterList, resultHideColumnNames)
def getParameterList(self):
parameterList = []
parameterList.append(("general", "group"))
parameterList.append(("RNAV Specification", self.parametersPanel.cmbRnavSpecification.SelectedItem))
if self.parametersPanel.cmbRnavSpecification.SelectedIndex == 0:
parameterList.append(("ATT", self.parametersPanel.pnlTolerances.txtAtt.text() + "nm"))
parameterList.append(("XTT", self.parametersPanel.pnlTolerances.txtXtt.text() + "nm"))
parameterList.append(("1/2 A/W", self.parametersPanel.pnlTolerances.txtAsw.text() + "nm"))
else:
if self.parametersPanel.cmbPhaseOfFlight.currentIndex() != 0:
parameterList.append(("Aerodrome Reference Point(ARP)", "group"))
longLatPoint = QgisHelper.Meter2Degree(float(self.parametersPanel.pnlArp.txtPointX.text()), float(self.parametersPanel.pnlArp.txtPointY.text()))
parameterList.append(("Lat", self.parametersPanel.pnlArp.txtLat.Value))
parameterList.append(("Lon", self.parametersPanel.pnlArp.txtLong.Value))
parameterList.append(("X", self.parametersPanel.pnlArp.txtPointX.text()))
parameterList.append(("Y", self.parametersPanel.pnlArp.txtPointY.text()))
parameterList.append(("Waypoint", "group"))
longLatPoint = QgisHelper.Meter2Degree(float(self.parametersPanel.pnlWaypoint1.txtPointX.text()), float(self.parametersPanel.pnlWaypoint1.txtPointY.text()))
parameterList.append(("Lat", self.parametersPanel.pnlWaypoint1.txtLat.Value))
parameterList.append(("Lon", self.parametersPanel.pnlWaypoint1.txtLong.Value))
parameterList.append(("X", self.parametersPanel.pnlWaypoint1.txtPointX.text()))
parameterList.append(("Y", self.parametersPanel.pnlWaypoint1.txtPointY.text()))
parameterList.append(("Cat.H", str(self.parametersPanel.chbCatH.Checked)))
parameterList.append((self.parametersPanel.chbCircularArcs.Caption, str(self.parametersPanel.chbCircularArcs.Checked)))
parameterList.append(("Parameters", "group"))
parameterList.append(("Selection Mode", self.parametersPanel.cmbSelectionMode.SelectedItem))
parameterList.append(("In-bound Track", "Plan : " + str(self.parametersPanel.pnlInbound.txtRadialPlan.Value) + define._degreeStr))
parameterList.append(("", "Geodetic : " + str(self.parametersPanel.pnlInbound.txtRadialGeodetic.Value) + define._degreeStr))
# parameterList.append(("In-bound Track", self.parametersPanel.txtInbound.Value))
parameterList.append(("Out-bound Track", "Plan : " + str(self.parametersPanel.pnlOutbound.txtRadialPlan.Value) + define._degreeStr))
parameterList.append(("", "Geodetic : " + str(self.parametersPanel.pnlOutbound.txtRadialGeodetic.Value) + define._degreeStr))
# parameterList.append(("Out-bound Track", self.parametersPanel.txtOutbound.Value))
parameterList.append(("IAS", str(self.parametersPanel.pnlIas.Value.Knots) + "kts"))
parameterList.append(("Altitude", str(self.parametersPanel.pnlAltitude.Value.Feet) + "ft"))
parameterList.append(("ISA", str(self.parametersPanel.pnlIsa.Value)))
parameterList.append(("Bank Angle", str(self.parametersPanel.pnlBankAngle.Value)))
parameterList.append(("Wind", str(self.parametersPanel.pnlWind.Value.Knots) + "kts"))
parameterList.append(("Primary Moc", str(self.parametersPanel.pnlPrimaryMoc.Value.Metres) + "m"))
parameterList.append(("Construction Type", self.parametersPanel.cmbConstructionType.SelectedItem))
parameterList.append(("MOCmultipiler", str(self.parametersPanel.mocSpinBox.value())))
if self.parametersPanel.cmbConstructionType.SelectedIndex == 0:
parameterList.append(("Draw Waypoint Tolerance", str(self.parametersPanel.chbDrawTolerance.Checked)))
parameterList.append(("Results / Checked Obstacles", "group"))
parameterList.append(("Checked Obstacles", "group"))
c = self.obstaclesModel.rowCount()
parameterList.append(("Number of Checked Obstacles", str(c)))
return parameterList
def uiStateInit(self):
self.ui.grbMostCritical.setVisible(False)
self.ui.grbResult_2.setVisible(False)
self.ui.btnUpdateQA.setVisible(False)
self.ui.btnUpdateQA_2.setVisible(False)
self.ui.frm_cmbObstSurface.setVisible(False)
self.ui.btnPDTCheck.setVisible(False)
self.ui.tabCtrlGeneral.removeTab(2)
self.ui.tabCtrlGeneral.removeTab(1)
self.ui.btnEvaluate.setVisible(False)
self.ui.btnConstruct.setVisible(False)
# self.ui.btnPDTCheck.clicked.connect(self.btnPDTCheck_Click)
return FlightPlanBaseDlg.uiStateInit(self)
# def btnPDTCheck_Click(self):
# pdtResultStr = MathHelper.pdtCheckResultToString(float(self.parametersPanel.txtIsa.text()), Altitude(float(self.parametersPanel.txtAltitude.text()), AltitudeUnits.FT), float(self.parametersPanel.txtIas.text()), float(self.parametersPanel.txtTime.text()))
#
# QMessageBox.warning(self, "PDT Check", pdtResultStr)
def btnEvaluate_Click(self):
self.complexObstacleArea.ObstacleArea = None
ObstacleTable.MocMultiplier = self.parametersPanel.mocSpinBox.value()
# self.obstaclesModel = TurnProtectionAndObstacleAssessmentObstacles(self.complexObstacleArea, self.parametersPanel.pnlPrimaryMoc.Value, self.parametersPanel.pnlAltitude.Value, self.manualPolygon )
FlightPlanBaseDlg.btnEvaluate_Click(self)
self.ui.btnLocate.setEnabled(True)
def btnConstruct_Click(self):
flag = FlightPlanBaseDlg.btnConstruct_Click(self)
if not flag:
return
def outputResultMethod(self):
self.manualPolygon = self.toolSelectByPolygon.polygonGeom
def manualEvent(self, index):
QgisHelper.ClearRubberBandInCanvas(define._canvas)
self.manualPolygon = None
if index != 0:
self.toolSelectByPolygon = RubberBandPolygon(define._canvas)
define._canvas.setMapTool(self.toolSelectByPolygon)
self.connect(self.toolSelectByPolygon, SIGNAL("outputResult"), self.outputResultMethod)
else:
self.mapToolPan = QgsMapToolPan(define._canvas)
define._canvas.setMapTool(self.mapToolPan )
def getVPA(self):
num = 2.5
for i in range(0, self.parametersPanel.cmbVPA.SelectedIndex):
num = num + 0.1
return num
def putWithInHeightLoss(self):
if self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.H:
self.parametersPanel.pnlHeightLoss.Value = Altitude(35)
return
try:
num = self.getVPA()
num1 = self.parametersPanel.pnlThrPosition.Altitude().Metres
num2 = self.parametersPanel.pnlIas.Value.Knots
num3 = round(0.125 * num2 + 28.3)
num4 = round(0.177 * num2 - 3.2)
num5 = 0
if (num1 > 900):
num5 = num5 + num4 * 0.02 * (num1 / 300)
if (num > 3.2):
num5 = num5 + num4 * 0.05 * ((num - 3.2) / 0.1)
num5 = MathHelper.smethod_0(num5, 0)
self.parametersPanel.pnlHeightLoss.Value = Altitude(num3 + num5)
except:
self.parametersPanel.pnlHeightLoss.Value = Altitude(0.0)
def initParametersPan(self):
ui = Ui_PaIls()
self.parametersPanel = ui
FlightPlanBaseDlg.initParametersPan(self)
items = []
for i in range(25, 71):
num = float(i) / 10
items.append(QString(str(num)) + define._degreeStr)
self.parametersPanel.cmbVPA.Items = items
self.parametersPanel.cmbVPA.SelectedIndex = 5
self.parametersPanel.cmbAircraftCategory.Items = ["A", "B", "C", "D", "E", "H", "Custom"]
# self.parametersPanel.pnlWind.setAltitude(self.parametersPanel.pnlAltitude.Value)
#
# self.parametersPanel.cmbSelectionMode.Items = ["Automatic", "Manual"]
#
# self.parametersPanel.cmbConstructionType.Items = ["2D", "3D"]
# self.parametersPanel.cmbType1.Items = ["Fly-By", "Fly-Over", "RF"]
# self.parametersPanel.cmbType2.Items = ["Fly-By", "Fly-Over", "RF"]
#
# self.parametersPanel.cmbRnavSpecification.Items = ["", "Rnav5", "Rnav2", "Rnav1", "Rnp4", "Rnp2", "Rnp1", "ARnp2", "ARnp1", "ARnp09", "ARnp08", "ARnp07", "ARnp06", "ARnp05", "ARnp04", "ARnp03", "RnpApch"]
#
#
self.connect(self.parametersPanel.pnlAerodromeAltitude, SIGNAL("Event_0"), self.altitudeChanged)
self.connect(self.parametersPanel.pnlIas, SIGNAL("Event_0"), self.altitudeChanged)
self.connect(self.parametersPanel.pnlIsa, SIGNAL("Event_0"), self.altitudeChanged)
self.connect(self.parametersPanel.pnlEstimatedAltitude, SIGNAL("Event_0"), self.pnlEstimatedAltitude_Event_0)
self.connect(self.parametersPanel.pnlEstimatedAltitude, SIGNAL("editingFinished"), self.showMarkDaSoc)
self.connect(self.parametersPanel.cmbVPA, SIGNAL("Event_0"), self.cmbVPA_Event_0)
self.connect(self.parametersPanel.cmbAircraftCategory, SIGNAL("Event_0"), self.cmbAircraftCategory_Event_0)
# self.connect(self.parametersPanel.cmbPhaseOfFlight, SIGNAL("Event_0"), self.cmbPhaseOfFlightChanged)
# self.connect(self.parametersPanel.cmbSelectionMode, SIGNAL("Event_0"), self.manualEvent)
self.connect(self.parametersPanel.pnlHeightLoss, SIGNAL("Event_0"), self.pnlHeightLoss_Event_0)
self.connect(self.parametersPanel.pnlHeightLoss, SIGNAL("editingFinished"), self.showMarkDaSoc)
self.connect(self.parametersPanel.pnlRDH, SIGNAL("editingFinished"), self.pnlRDH_Event_0)
self.connect(self.parametersPanel.pnlDistXz, SIGNAL("Event_0"), self.showMarkDaSoc)
# self.connect(self.parametersPanel.cmbType2, SIGNAL("Event_0"), self.method_31)
#
self.connect(self.parametersPanel.pnlFapPosition, SIGNAL("positionChanged"), self.calcRwyBearing)
self.connect(self.parametersPanel.pnlThrPosition, SIGNAL("positionChanged"), self.calcRwyBearing)
self.parametersPanel.pnlFapPosition.btnCalculater.clicked.connect(self.pnlFapPosition_btnCalculater_clicked)
#
self.parametersPanel.cmbAircraftCategory.SelectedIndex = 0
self.putAircraftSpeed()
self.altitudeChanged()
self.putWithInHeightLoss()
self.calcSocAltitude()
self.putDistances()
def pnlFapPosition_btnCalculater_clicked(self):
self.gbFAWP = self.parametersPanel.pnlFapPosition
dlg = CalcDlg(self, RnavCommonWaypoint.FAWP, self.parametersPanel.cmbAircraftCategory.SelectedIndex, None, None, [self.parametersPanel.pnlThrPosition.Point3d, self.parametersPanel.pnlRwyEndPosition.Point3d, None])
dlg.setWindowTitle("Calculate FAP")
dlg.groupBox_4.setVisible(False)
dlg.groupBox_5.setVisible(False)
dlg.resize(200,100)
dlg.txtForm.setText("")
self.parameterCalcList = []
# if len(self.parameterCalcList) > 0 and self.parameterCalcList[0] != None :
# str1, str2 = self.parameterCalcList[0]
# calcFAWPDlg.txtBearing.setText(str1)
# calcFAWPDlg.txtDistance.setText(str2)
# calcFAWPDlg.txtBearing.setText("007.86")
# calcFAWPDlg.txtDistance.setText("")
dlg.txtDistance.setEnabled(True)
self.annotationFAWP.show()
dlg.show()
# dlg = None
# if self.parametersPanel.pnlRwyEndPosition.Point3d == None:
# dlg = DlgFapCalcPosition(self, self.parametersPanel.pnlThrPosition, None, self.parametersPanel.pnlInboundTrack.Value)
# else:
# dlg = DlgFapCalcPosition(self, self.parametersPanel.pnlThrPosition, self.parametersPanel.pnlRwyEndPosition.Point3d)
# dlg.show()
# ` nauticalMiles = float(self.txtDistance.text())
# value = float(self.txtBearing.text())
# num1 = math.fabs(self.rethr - value)
# if (num1 > 180):
# num1 = 360 - num1
# num2 = math.sin(Unit.smethod_0(num1)) * 0.7559395
# num3 = Unit.smethod_1(math.asin(num2 / nauticalMiles))
# num4 = math.cos(Unit.smethod_0(num1)) * 0.755939525
# num5 = math.cos(Unit.smethod_0(num3)) * nauticalMiles
# return RnavWaypoints.smethod_3(self.pos1400m, float(self.txtBearing.text()), Distance(math.fabs(num5 - num4), DistanceUnits.NM))
def putDistances(self):
try:
point3dThr = self.parametersPanel.pnlThrPosition.Point3d
point3dFaf = self.parametersPanel.pnlFapPosition.Point3d
point3dThr = self.parametersPanel.pnlThrPosition.Point3d
# point3dFaf = self.parametersPanel.pnlFapPosition.Point3d
inboundTrackRad = MathHelper.smethod_4(self.parametersPanel.pnlInboundTrack.Value)#MathHelper.getBearing(point3dFaf, point3dThr)
inboundTrack180Rad = MathHelper.smethod_4(inboundTrackRad + math.pi)
estimatedAltitdeMeters = self.parametersPanel.pnlEstimatedAltitude.Value.Metres
thrAltitudeMeters = self.parametersPanel.pnlThrPosition.Altitude().Metres
heightLossAltitudeMeters = self.parametersPanel.pnlHeightLoss.Value.Metres
rdhAltitudeMeters = self.parametersPanel.pnlRDH.Value.Metres
vpa = Unit.ConvertDegToRad(self.getVPA())
xz = self.parametersPanel.pnlDistXz.Value.Metres
socThrDistMeters = ((estimatedAltitdeMeters - thrAltitudeMeters - heightLossAltitudeMeters) / math.tan(vpa)) + xz
daThrDistMeters = (estimatedAltitdeMeters - thrAltitudeMeters - rdhAltitudeMeters) / math.tan(vpa)
self.parametersPanel.pnlDistOfDaThr.Value = Distance(daThrDistMeters)#MathHelper.calcDistance(point3dThr, self.daPoint3d))
self.parametersPanel.pnlDistOfSocThr.Value = Distance(socThrDistMeters)#MathHelper.calcDistance(point3dThr, self.socPoint3d))
self.parametersPanel.pnlDistOfFafDA.Value = Distance(MathHelper.calcDistance(point3dFaf, self.daPoint3d))
except:
pass
def showMarkDaSoc(self):
try:
flag = FlightPlanBaseDlg.btnConstruct_Click(self)
# if not flag:
# return
point3dThr = self.parametersPanel.pnlThrPosition.Point3d
point3dFaf = self.parametersPanel.pnlFapPosition.Point3d
inboundTrackRad = Unit.ConvertDegToRad(self.parametersPanel.pnlInboundTrack.Value)#MathHelper.getBearing(point3dFaf, point3dThr)
inboundTrack180Rad = MathHelper.smethod_4(inboundTrackRad + math.pi)
estimatedAltitdeMeters = self.parametersPanel.pnlEstimatedAltitude.Value.Metres
thrAltitudeMeters = self.parametersPanel.pnlThrPosition.Altitude().Metres
heightLossAltitudeMeters = self.parametersPanel.pnlHeightLoss.Value.Metres
rdhAltitudeMeters = self.parametersPanel.pnlRDH.Value.Metres
vpa = Unit.ConvertDegToRad(self.getVPA())
xz = self.parametersPanel.pnlDistXz.Value.Metres
socThrDistMeters = ((estimatedAltitdeMeters - thrAltitudeMeters - heightLossAltitudeMeters) / math.tan(vpa)) + xz
daThrDistMeters = (estimatedAltitdeMeters - thrAltitudeMeters - rdhAltitudeMeters) / math.tan(vpa)
sockBearing = inboundTrackRad
# if socThrDistMeters < 0:
# sockBearing = inboundTrack180Rad
# socThrDistMeters = math.fabs(socThrDistMeters)
# else:
# sockBearing = inboundTrackRad
daBearing = inboundTrack180Rad
# if daThrDistMeters < 0:
# daBearing = inboundTrackRad
# daThrDistMeters = math.fabs(daThrDistMeters)
# else:
# daBearing = inboundTrack180Rad
self.socPoint3d = MathHelper.distanceBearingPoint(point3dThr, sockBearing, -socThrDistMeters).smethod_167(self.calcSocAltitude())
self.daPoint3d = MathHelper.distanceBearingPoint(point3dThr, daBearing, daThrDistMeters)
daSocLayer = AcadHelper.createVectorLayer("DA_SOC_" + self.surfaceType, QGis.Point)
AcadHelper.setGeometryAndAttributesInLayer(daSocLayer, self.socPoint3d, False, {"Caption":"SOC"})
AcadHelper.setGeometryAndAttributesInLayer(daSocLayer, self.daPoint3d, False, {"Caption":"DA"})
QgisHelper.appendToCanvas(define._canvas, [daSocLayer], self.surfaceType)
palSetting = QgsPalLayerSettings()
palSetting.readFromLayer(daSocLayer)
palSetting.enabled = True
palSetting.fieldName = "Caption"
palSetting.isExpression = True
palSetting.placement = QgsPalLayerSettings.AroundPoint
palSetting.setDataDefinedProperty(QgsPalLayerSettings.Size, True, True, '8', "")
palSetting.writeToLayer(daSocLayer)
QgisHelper.zoomToLayers([daSocLayer])
self.resultLayerList = [daSocLayer]
# # show SOC Mark
# point3d = MathHelper.distanceBearingPoint(self.socPoint3d, Unit.ConvertDegToRad(450) - 0, 100)
# point3d1 = MathHelper.distanceBearingPoint(self.socPoint3d, Unit.ConvertDegToRad(450) - math.pi / 2, 100)
# point3d2 = MathHelper.distanceBearingPoint(self.socPoint3d, Unit.ConvertDegToRad(450) - math.pi, 100)
# point3d3 = MathHelper.distanceBearingPoint(self.socPoint3d, Unit.ConvertDegToRad(450) - (math.pi * 3) / 2 , 100)
#
# if self.socRubber == None:
# self.socRubber = QgsRubberBand(define._canvas, QGis.Line)
# self.socRubber.setColor(Qt.yellow)
# else:
# self.socRubber.reset(QGis.Line)
# self.socRubber.addGeometry(QgsGeometry.fromPolyline([point3d, point3d2]), None)
# self.socRubber.addGeometry(QgsGeometry.fromPolyline([point3d1, point3d3]), None)
# circle = MathHelper.constructCircle(self.socPoint3d, 100, 16)
# self.socRubber.addGeometry(QgsGeometry.fromPolyline(circle), None)
# self.socRubber.show()
#
# self.socAnnotation.setMapPosition(self.socPoint3d)
# self.socAnnotation.show()
#
# # show DA Mark
# point3d = MathHelper.distanceBearingPoint(self.daPoint3d, Unit.ConvertDegToRad(450) - 0, 100)
# point3d1 = MathHelper.distanceBearingPoint(self.daPoint3d, Unit.ConvertDegToRad(450) - math.pi / 2, 100)
# point3d2 = MathHelper.distanceBearingPoint(self.daPoint3d, Unit.ConvertDegToRad(450) - math.pi, 100)
# point3d3 = MathHelper.distanceBearingPoint(self.daPoint3d, Unit.ConvertDegToRad(450) - (math.pi * 3) / 2 , 100)
#
# if self.daRubber == None:
# self.daRubber = QgsRubberBand(define._canvas, QGis.Line)
# self.daRubber.setColor(Qt.yellow)
# else:
# self.daRubber.reset(QGis.Line)
# self.daRubber.addGeometry(QgsGeometry.fromPolyline([point3d, point3d2]), None)
# self.daRubber.addGeometry(QgsGeometry.fromPolyline([point3d1, point3d3]), None)
# circle = MathHelper.constructCircle(self.daPoint3d, 100, 16)
# self.daRubber.addGeometry(QgsGeometry.fromPolyline(circle), None)
# self.daRubber.show()
#
# self.daAnnotation.setMapPosition(self.daPoint3d)
# self.daAnnotation.show()
self.putDistances()
return daSocLayer
except:
pass
def pnlHeightLoss_Event_0(self):
self.calcSocAltitude()
self.putDistances()
def pnlRDH_Event_0(self):
self.showMarkDaSoc()
def pnlEstimatedAltitude_Event_0(self):
self.calcSocAltitude()
self.putDistances()
def cmbVPA_Event_0(self):
self.putWithInHeightLoss()
self.showMarkDaSoc()
def cmbAircraftCategory_Event_0(self):
if self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.H:
self.parametersPanel.pnlDistXz.Value = Distance(-700)
self.parametersPanel.pnlDistXz.Enabled = False
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.Custom:
self.parametersPanel.pnlDistXz.Enabled = True
else:
self.parametersPanel.pnlDistXz.Enabled = False
if self.dlgType == SurfaceTypes.BARO_VNAV:
for case in switch(self.parametersPanel.cmbAircraftCategory.SelectedIndex):
if case(AircraftSpeedCategory.A) or case(AircraftSpeedCategory.B):
self.parametersPanel.pnlDistXz.Value = Distance(-900)
elif case(AircraftSpeedCategory.C):
self.parametersPanel.pnlDistXz.Value = Distance(-1100)
elif case(AircraftSpeedCategory.D):
self.parametersPanel.pnlDistXz.Value = Distance(-1400)
elif case(AircraftSpeedCategory.E):
self.parametersPanel.pnlDistXz.Value = Distance(-1400)
else:
self.parametersPanel.pnlDistXz.Value = Distance(-900)
self.putAircraftSpeed()
self.putWithInHeightLoss()
def calcSocAltitude(self):
val = self.parametersPanel.pnlEstimatedAltitude.Value.Metres - self.parametersPanel.pnlHeightLoss.Value.Metres
self.parametersPanel.pnlSocAltitude.Value = Altitude(val)
return val
def altitudeChanged(self):
self.parametersPanel.pnlWind.setAltitude(self.parametersPanel.pnlAerodromeAltitude.Value)
try:
self.parametersPanel.pnlTas.Value = Speed.smethod_0(self.parametersPanel.pnlIas.Value, self.parametersPanel.pnlIsa.Value, self.parametersPanel.pnlAerodromeAltitude.Value)
except:
raise ValueError("Value Invalid")
def WPT2Layer(self):
mapUnits = define._canvas.mapUnits()
if define._mapCrs == None:
if mapUnits == QGis.Meters:
resultLayer = QgsVectorLayer("Point?crs=EPSG:32633", "WPT_" + self.surfaceType.replace(" ", "_").replace("-", "_"), "memory")
else:
resultLayer = QgsVectorLayer("Point?crs=EPSG:4326", "WPT_" + self.surfaceType.replace(" ", "_").replace("-", "_"), "memory")
else:
resultLayer = QgsVectorLayer("Point?crs=%s"%define._mapCrs.authid (), "WPT_" + self.surfaceType.replace(" ", "_").replace("-", "_"), "memory")
shpPath = ""
if define.obstaclePath != None:
shpPath = define.obstaclePath
elif define.xmlPath != None:
shpPath = define.xmlPath
else:
shpPath = define.appPath
er = QgsVectorFileWriter.writeAsVectorFormat(resultLayer, shpPath + "/" + "RnavTurningSegmentAnalyserWpt" + ".shp", "utf-8", resultLayer.crs())
resultLayer = QgsVectorLayer(shpPath + "/" + "RnavTurningSegmentAnalyserWpt" + ".shp", "WPT_RnavTurningSegmentAnalyser", "ogr")
fieldName = "CATEGORY"
resultLayer.dataProvider().addAttributes( [QgsField(fieldName, QVariant.String)] )
resultLayer.startEditing()
fields = resultLayer.pendingFields()
i = 1
feature = QgsFeature()
feature.setFields(fields)
feature.setGeometry(QgsGeometry.fromPoint (self.parametersPanel.pnlWaypoint1.Point3d))
feature.setAttribute(fieldName, "Waypoint1")
pr = resultLayer.dataProvider()
pr.addFeatures([feature])
# resultLayer.addFeature(feature)
feature.setGeometry(QgsGeometry.fromPoint (self.parametersPanel.pnlWaypoint2.Point3d))
feature.setAttribute(fieldName, "Waypoint2")
pr = resultLayer.dataProvider()
pr.addFeatures([feature])
# resultLayer.addFeature(feature)
resultLayer.commitChanges()
renderCatFly = None
if self.parametersPanel.cmbType1.SelectedIndex == 1:
'''FlyOver'''
symbolFlyOver = QgsSymbolV2.defaultSymbol(resultLayer.geometryType())
symbolFlyOver.deleteSymbolLayer(0)
svgSymLayer = QgsSvgMarkerSymbolLayerV2("Resource/flyover.svg", 10.0, 0.0)
symbolFlyOver.appendSymbolLayer(svgSymLayer)
renderCatFly = QgsRendererCategoryV2(0, symbolFlyOver,"Fly Over")
elif self.parametersPanel.cmbType1.SelectedIndex == 0:
'''FlyBy'''
symbolFlyBy = QgsSymbolV2.defaultSymbol(resultLayer.geometryType())
symbolFlyBy.deleteSymbolLayer(0)
svgSymLayer = QgsSvgMarkerSymbolLayerV2("Resource/flyby.svg", 10.0, 0.0)
symbolFlyBy.appendSymbolLayer(svgSymLayer)
renderCatFly = QgsRendererCategoryV2(0, symbolFlyBy,"Fly By")
else:
return None
WPT_EXPRESION = "CASE WHEN \"CATEGORY\" = 'Waypoint1' THEN 0 " + \
"END"
symRenderer = QgsCategorizedSymbolRendererV2(WPT_EXPRESION, [renderCatFly])
resultLayer.setRendererV2(symRenderer)
return resultLayer
def putAircraftSpeed(self):
if self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.A:
# self.parametersPanel.pnlIas.Value = Speed(100)
self.parametersPanel.pnlIas.Value = Speed(90)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.B:
# self.parametersPanel.pnlIas.Value = Speed(130)
self.parametersPanel.pnlIas.Value = Speed(120)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.C:
# self.parametersPanel.pnlIas.Value = Speed(160)
self.parametersPanel.pnlIas.Value = Speed(140)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.D:
# self.parametersPanel.pnlIas.Value = Speed(185)
self.parametersPanel.pnlIas.Value = Speed(165)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.E:
# self.parametersPanel.pnlIas.Value = Speed(230)
self.parametersPanel.pnlIas.Value = Speed(210)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.Custom:
# self.parametersPanel.pnlIas.Value = self.customIas
self.parametersPanel.pnlIas.Value = Speed(165)
elif self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.H:
# self.parametersPanel.pnlIas.Value = self.customIas
self.parametersPanel.pnlIas.Value = Speed(90)
self.parametersPanel.pnlIas.Enabled = self.parametersPanel.cmbAircraftCategory.SelectedIndex == AircraftSpeedCategory.Custom
def parse_response(self):
names = {
"dilanka": "Ділянка",
"ikk": "ІКК",
"obl": "Область",
"rajonunion": "Район",
"grunt": "Ґрунти",
"dilanka_arch": "Ділянка (архівна)",
"restriction": "Обмеження",
"cnap": "ЦНАД"
}
text = ""
scene = self.canvas.scene()
annotation = QgsTextAnnotationItem(self.canvas)
annotation.setMapPosition(QgsPoint(self.x_map, self.y_map))
# Starting from 2.14
# TODO: check and fix bug for previous versions
if qgis.utils.QGis.QGIS_VERSION_INT < 20140:
iface.messageBar().pushMessage(
"Warning",
"For correct transformation annotations between CRS please use"
" version 2.14 or later",
level=QgsMessageBar.WARNING)
# This delete annotation if we used other CRS than defined when we use OTF
# if qgis.utils.QGis.QGIS_VERSION_INT >= 20140:
# annotation.setMapPositionCrs(QgsCoordinateReferenceSystem(3857))
annotation.setActive(True)
# fixes bug when response starts not with JSON object
# http://map.land.gov.ua/kadastrova-karta/getobjectinfo?x=6201535.76141&y=2477307.1863&zoom=16&actLayers[]=kadastr_arch
response_read = self.response.read()
if not response_read.startswith("{"):
response_read = "{" + response_read.split("{")[-1]
json_obj = json.loads(response_read)
for k, v in json_obj.items():
if k == "pusto":
annotation.setFrameSize(QSizeF(100, 20))
annotation.setDocument(QTextDocument("Data is empty"))
scene.addItem(annotation)
self.canvas.refresh()
return
if iface.mapCanvas().currentLayer().customProperty(
"layer_id") == 0:
annotation.setFrameSize(QSizeF(200, 300))
elif iface.mapCanvas().currentLayer().customProperty(
"layer_id") == 1:
annotation.setFrameSize(QSizeF(200, 100))
elif iface.mapCanvas().currentLayer().customProperty(
"layer_id") == 2:
annotation.setFrameSize(QSizeF(200, 300))
else:
annotation.setFrameSize(QSizeF(200, 250))
title = names.get(k, u"Noname")
text += title.decode("utf-8") + "\n"
html_parsed = BeautifulSoup.BeautifulSoup(v)
for i in html_parsed:
for j in i.findAll("li"):
write_text = ""
t = (j.contents[0].string, j.contents[1])
if t[0]:
write_text += t[0]
if isinstance(t[1], BeautifulSoup.Tag):
write_text += " " + t[1].text
else:
write_text += " " + t[1]
text += write_text + "\n"
# for j in i.findAll(text=True):
# j = str(j)
# if j.startswith("&") or j.startswith("Замовити") or j.startswith("Інформація про право власності"):
# continue
# text += j.decode("utf-8") + " "
# text += "\n"
annotation.setDocument(QTextDocument(text))
scene.addItem(annotation)
self.canvas.refresh()
def run(self):
project_id = self.settings.value("project/id")
epsg = self.settings.value("project/epsg")
locale = QSettings().value('locale/userLocale')[0:2]
if not project_id:
self.message_bar.pushCritical(
"Error",
_translate("VeriSO_EE_Geb_LokTest", "project_id not set",
None))
return
QApplication.setOverrideCursor(Qt.WaitCursor)
try:
group = _translate("VeriSO_EE_Geb_LokTest",
"Gebaeudeadressen - Lokalisationstest", None)
group += " (" + str(project_id) + ")"
# TODO: Check "tid" vs. t_ili_tid... in queries. Do not import
# i_ili_tid?
# define layer names here
lokalisation = _translate("VeriSO_EE_Geb_LokTest",
"Lokalisation Lokalisationstest", None)
strassenstueck_geometrie = _translate(
"VeriSO_EE_Geb_LokTest", "Strassenstueck (geometrie) "
"Lokalisationstest", None)
strassenstueck_anfangspunkt = _translate(
"VeriSO_EE_Geb_LokTest", "Strassenstueck ("
"anfangspunkt) "
"Lokalisationstest", None)
benanntesgebiet = _translate("VeriSO_EE_Geb_LokTest",
"Benanntes Gebiet Lokalisationstest",
None)
gebaeudeeingang = _translate("VeriSO_EE_Geb_LokTest",
"Gebaeudeeingang Lokalisationstest",
None)
shortestline = _translate("VeriSO_EE_Geb_LokTest",
"Kuerzeste Linie Lokalisationstest",
None)
hausnummerpos = _translate("VeriSO_EE_Geb_LokTest",
"HausnummerPos Lokalisationstest", None)
lokalisationsname = _translate("VeriSO_EE_Geb_LokTest",
"LokalisationsName", None)
vlayer_lokalisation = self.get_vector_layer_by_name(lokalisation)
if not vlayer_lokalisation:
layer = {
"type": "postgres",
"title": lokalisation,
"featuretype": "gebaeudeadressen_lokalisation",
"key": "ogc_fid",
"sql": "ogc_fid = -1",
"readonly": True,
"group": group
}
vlayer_lokalisation = self.layer_loader.load(layer)
vlayer_strassenstueck_geometrie = self.get_vector_layer_by_name(
strassenstueck_geometrie)
if not vlayer_strassenstueck_geometrie:
layer = {
"type":
"postgres",
"title":
"Strassenstueck (geometrie) Lokalisationstest",
"featuretype":
"gebaeudeadressen_strassenstueck",
"geom":
"geometrie",
"key":
"ogc_fid",
"sql":
"strassenstueck_von = -1",
"readonly":
True,
"group":
group,
"style":
"global_qml/gebaeudeadressen/strassenachsen_rot"
".qml"
}
vlayer_strassenstueck_geometrie = self.layer_loader.load(layer)
vlayer_strassenstueck_anfangspunkt = self.get_vector_layer_by_name(
strassenstueck_anfangspunkt)
if not vlayer_strassenstueck_anfangspunkt:
layer = {
"type": "postgres",
"title": "Strassenstueck (anfangspunkt) Lokalisationstest",
"featuretype": "gebaeudeadressen_strassenstueck",
"geom": "anfangspunkt",
"key": "ogc_fid",
"sql": "strassenstueck_von = -1",
"readonly": True,
"group": group,
"style": "global_qml/gebaeudeadressen/anfangspunkt_rot.qml"
}
vlayer_strassenstueck_anfangspunkt = self.layer_loader.load(
layer)
vlayer_benanntesgebiet = self.get_vector_layer_by_name(
benanntesgebiet)
if not vlayer_benanntesgebiet:
layer = {
"type":
"postgres",
"title":
"Benanntes Gebiet Lokalisationstest",
"featuretype":
"gebaeudeadressen_benanntesgebiet",
"geom":
"flaeche",
"key":
"ogc_fid",
"sql":
"benanntesgebiet_von = -1",
"readonly":
True,
"group":
group,
"style":
"global_qml/gebaeudeadressen/benanntesgebiet_rot"
".qml"
}
vlayer_benanntesgebiet = self.layer_loader.load(layer)
vlayer_gebaeudeeingang = self.get_vector_layer_by_name(
gebaeudeeingang)
if not vlayer_gebaeudeeingang:
layer = {
"type":
"postgres",
"title":
"Gebaeudeeingang Lokalisationstest",
"featuretype":
"gebaeudeadressen_gebaeudeeingang",
"geom":
"lage",
"key":
"ogc_fid",
"sql":
"gebaeudeeingang_von = -1",
"readonly":
True,
"group":
group,
"style":
"global_qml/gebaeudeadressen/gebaeudeeingang_rot"
".qml"
}
vlayer_gebaeudeeingang = self.layer_loader.load(layer)
vlayer_shortestline = self.get_vector_layer_by_name(shortestline)
if not vlayer_shortestline:
layer = {
"type":
"postgres",
"title":
"Kuerzeste Linie Lokalisationstest",
"featuretype":
"t_shortestline_hausnummerpos",
"geom":
"the_geom",
"key":
"ogc_fid",
"sql":
"lok_tid = -1",
"readonly":
True,
"group":
group,
"style":
"global_qml/gebaeudeadressen/shortestline_linie_rot.qml"
}
vlayer_shortestline = self.layer_loader.load(layer)
vlayer_hausnummerpos = self.get_vector_layer_by_name(hausnummerpos)
if not vlayer_hausnummerpos:
layer = {
"type": "postgres",
"title": "HausnummerPos Lokalisationstest",
"featuretype": "v_gebaeudeadressen_hausnummerpos",
"geom": "pos",
"key": "ogc_fid",
"sql": "lok_tid = -1",
"readonly": True,
"group": group,
"style":
"global_qml/gebaeudeadressen/hausnummerpos_rot.qml"
}
vlayer_hausnummerpos = self.layer_loader.load(layer)
vlayer_lokalisationsname = self.get_vector_layer_by_name(
lokalisationsname)
if not vlayer_lokalisationsname:
self.message_bar.pushMessage(
"Error",
_translate("VeriSO_EE_Geb_LokTest",
"Layer _LokalisationsName_ not found.", None),
level=QgsMessageBar.CRITICAL,
duration=0)
QApplication.restoreOverrideCursor()
return
iterator = vlayer_lokalisationsname.getFeatures()
ids = []
for feature in iterator:
ids.append(feature.id())
if vlayer_lokalisationsname.selectedFeatureCount() < 1:
self.message_bar.pushCritical(
"Error",
_translate("VeriSO_EE_Geb_LokTest",
"No _LokalisationsName_ selected.", None))
QApplication.restoreOverrideCursor()
return
if vlayer_lokalisationsname.selectedFeatureCount() > 1:
self.message_bar.pushCritical(
"Error",
_translate(
"VeriSO_EE_Geb_LokTest",
"Please select only one (1) _LokalisationsName_.",
None))
QApplication.restoreOverrideCursor()
return
feat = QgsFeature()
id = vlayer_lokalisationsname.selectedFeaturesIds()[0]
feat = vlayer_lokalisationsname.selectedFeatures()[0]
idx = ids.index(id)
benannte_idx = vlayer_lokalisationsname.fieldNameIndex("benannte")
text_idx = vlayer_lokalisationsname.fieldNameIndex("atext")
if benannte_idx == -1 or text_idx == -1:
self.message_bar.pushCritical(
"Error",
_translate("VeriSO_EE_Geb_LokTest",
"Field _benannte_ or _text_ not found.", None))
QApplication.restoreOverrideCursor()
return
benannte = feat.attributes()[benannte_idx]
lokalisationsname = feat.attributes()[text_idx]
vlayer_strassenstueck_geometrie.setSubsetString(
"(strassenstueck_von = " + str(benannte) + ")")
vlayer_strassenstueck_anfangspunkt.setSubsetString(
"(strassenstueck_von = " + str(benannte) + ")")
vlayer_benanntesgebiet.setSubsetString("(benanntesgebiet_von = " +
str(benannte) + ")")
vlayer_gebaeudeeingang.setSubsetString("(gebaeudeeingang_von = " +
str(benannte) + ")")
vlayer_lokalisation.setSubsetString("(ogc_fid = " + str(benannte) +
")")
vlayer_shortestline.setSubsetString("(lok_tid = " + str(benannte) +
")")
vlayer_hausnummerpos.setSubsetString("(lok_tid = " +
str(benannte) + ")")
if vlayer_strassenstueck_geometrie.featureCount() > 0:
x_min = vlayer_strassenstueck_geometrie.extent().xMinimum()
y_min = vlayer_strassenstueck_geometrie.extent().yMinimum()
x_max = vlayer_strassenstueck_geometrie.extent().xMaximum()
y_max = vlayer_strassenstueck_geometrie.extent().yMaximum()
if vlayer_benanntesgebiet.featureCount() > 0:
x_min = vlayer_benanntesgebiet.extent().xMinimum()
y_min = vlayer_benanntesgebiet.extent().yMinimum()
x_max = vlayer_benanntesgebiet.extent().xMaximum()
y_max = vlayer_benanntesgebiet.extent().yMaximum()
try:
if vlayer_gebaeudeeingang.featureCount() > 0:
if vlayer_gebaeudeeingang.extent().xMinimum() < x_min:
x_min = vlayer_gebaeudeeingang.extent().xMinimum()
if vlayer_gebaeudeeingang.extent().yMinimum() < y_min:
y_min = vlayer_gebaeudeeingang.extent().yMinimum()
if vlayer_gebaeudeeingang.extent().xMaximum() > x_max:
x_max = vlayer_gebaeudeeingang.extent().xMaximum()
if vlayer_gebaeudeeingang.extent().yMaximum() > y_max:
y_max = vlayer_gebaeudeeingang.extent().yMaximum()
rect = QgsRectangle(x_min, y_min, x_max, y_max)
rect.scale(1.3)
except UnboundLocalError:
vlayer_gemeindegrenze = self.getVectorLayerByName(
"Gemeindegrenze")
if vlayer_gemeindegrenze is None:
rect = self.canvas.fullExtent()
else:
rect = vlayer_gemeindegrenze.extent()
self.iface.mapCanvas().setExtent(rect)
self.iface.mapCanvas().refresh()
iterator = vlayer_lokalisation.getFeatures()
# only one feature is selected
for feature in iterator:
prinzip_idx = vlayer_lokalisation.fieldNameIndex(
"nummerierungsprinzip_txt")
attributeprovisorisch_idx = vlayer_lokalisation.fieldNameIndex(
"attributeprovisorisch_txt")
offiziell_idx = vlayer_lokalisation.fieldNameIndex(
"istoffiziellebezeichnung_txt")
status_idx = vlayer_lokalisation.fieldNameIndex("status_txt")
inaenderung_idx = vlayer_lokalisation.fieldNameIndex(
"inaenderung_txt")
art_idx = vlayer_lokalisation.fieldNameIndex("art_txt")
something_missing = (prinzip_idx == -1
or attributeprovisorisch_idx == -1
or offiziell_idx == -1 or status_idx == -1
or inaenderung_idx == -1 or art_idx == -1)
if something_missing:
self.message_bar.pushMessage("Error",
_translate(
"VeriSO_EE_Geb_LokTest",
"Field not found.", None),
level=QgsMessageBar.CRITICAL,
duration=0)
QApplication.restoreOverrideCursor()
return
prinzip = feature.attributes()[prinzip_idx]
attributeprovisorisch = feature.attributes(
)[attributeprovisorisch_idx]
offiziell = feature.attributes()[offiziell_idx]
status = feature.attributes()[status_idx]
inaenderung = feature.attributes()[inaenderung_idx]
art = feature.attributes()[art_idx]
map_extent = self.canvas.extent()
x = map_extent.xMinimum()
y = map_extent.yMaximum()
text_item_found = False
items = list(self.iface.mapCanvas().scene().items())
for i in range(len(items)):
try:
name = items[i].data(0)
if str(name) == "LokalisationsInfo":
text_item = items[i]
text_item_found = True
except Exception:
pass
if not text_item_found:
text_item = QgsTextAnnotationItem(self.canvas)
text_item.setData(0, "LokalisationsInfo")
# noinspection PyUnboundLocalVariable
text_item.setMapPosition(
QgsPoint(x + 10 * self.canvas.mapUnitsPerPixel(),
y - 10 * self.canvas.mapUnitsPerPixel()))
text_item.setMapPositionFixed(False)
text_item.setFrameBorderWidth(0.0)
text_item.setFrameColor(QColor(250, 250, 250, 255))
text_item.setFrameBackgroundColor(QColor(250, 250, 250, 123))
text_item.setFrameSize(QSizeF(250, 150))
text_document = QTextDocument()
text_document.setHtml(
"<table style='font-size:12px;'><tr><td>Lok.Name: </td><td>" +
lokalisationsname + "</td></tr><tr><td>TID: </td><td>" +
str(benannte) + "</td></tr> <tr><td>Num.prinzip: "
"</td><td>" + str(prinzip) +
"</td></tr> <tr><td>Attr. prov.: </td><td>" +
str(attributeprovisorisch) + "</td></tr> <tr><td>ist "
"offiziell: </td><td>" + str(offiziell) +
"</td></tr> <tr><td>Status: "
"</td><td>" + str(status) + "</td></tr> <tr><td>in Aenderung: "
"</td><td>" + str(inaenderung) + "</td></tr> <tr><td>Art: "
"</td><td>" + str(art) + "</td></tr> </table>")
text_item.setDocument(text_document)
# This is a workaround: first ever position is not correct.
text_item.setMapPosition(
QgsPoint(x + 10 * self.canvas.mapUnitsPerPixel(),
y - 10 * self.canvas.mapUnitsPerPixel()))
text_item.update()
self.iface.mapCanvas().refresh()
try:
vlayer_lokalisationsname.setSelectedFeatures([ids[idx + 1]])
except IndexError:
self.message_bar.pushInfo(
"Information",
_translate("VeriSO_EE_Geb_LokTest", "End of table.", None))
except Exception as e:
QApplication.restoreOverrideCursor()
exc_type, exc_value, exc_traceback = sys.exc_info()
self.message_bar.pushMessage(
"Error",
str(traceback.format_exc(exc_traceback)),
level=QgsMessageBar.CRITICAL,
duration=0)
QApplication.restoreOverrideCursor()
QApplication.restoreOverrideCursor()
def setupUi(self, Form):
Form.setObjectName(_fromUtf8("Form"))
Form.resize(435, 580)
self.verticalLayout = QVBoxLayout(Form)
self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
self.gbParameters = GroupBox(Form)
self.gbParameters.Caption = "General"
self.verticalLayout.addWidget(self.gbParameters)
self.cmbAerodrome = ComboBoxPanel(self.gbParameters, True)
self.cmbAerodrome.Caption = "Aerodrome"
self.cmbAerodrome.LabelWidth = 150
self.cmbAerodrome.Width = 150
self.gbParameters.Add = self.cmbAerodrome
self.cmbRwyDir = ComboBoxPanel(self.gbParameters, True)
self.cmbRwyDir.Caption = "Runway Direction"
self.cmbRwyDir.LabelWidth = 150
self.cmbRwyDir.Width = 150
self.gbParameters.Add = self.cmbRwyDir
self.annotationFAWP = QgsTextAnnotationItem(define._canvas)
self.annotationFAWP.setDocument(QTextDocument("FAP"))
self.annotationFAWP.hide()
self.pnlFapPosition = PositionPanel(self.gbParameters,
self.annotationFAWP)
self.pnlFapPosition.Caption = "FAP Position"
# self.pnlFafPosition.btnCalculater.hide()
self.pnlFapPosition.hideframe_Altitude()
self.gbParameters.Add = self.pnlFapPosition
self.pnlThrPosition = PositionPanel(self.gbParameters)
self.pnlThrPosition.Caption = "Threshold Position"
self.pnlThrPosition.btnCalculater.hide()
self.gbParameters.Add = self.pnlThrPosition
self.pnlRwyEndPosition = PositionPanel(self.gbParameters)
self.pnlRwyEndPosition.Caption = "RwyEnd Position"
self.pnlRwyEndPosition.btnCalculater.hide()
self.gbParameters.Add = self.pnlRwyEndPosition
self.pnlRwyEndPosition.Visible = False
self.pnlInboundTrack = TrackRadialBoxPanel(self.gbParameters)
self.pnlInboundTrack.Caption = "In-bound Track"
self.pnlInboundTrack.LabelWidth = 150
self.gbParameters.Add = self.pnlInboundTrack
self.pnlEstimatedAltitude = AltitudeBoxPanel(self.gbParameters)
self.pnlEstimatedAltitude.Caption = "Estimated Altitude"
self.pnlEstimatedAltitude.LabelWidth = 150
self.pnlEstimatedAltitude.Value = Altitude(1000)
self.gbParameters.Add = self.pnlEstimatedAltitude
self.pnlAerodromeAltitude = AltitudeBoxPanel(self.gbParameters)
self.pnlAerodromeAltitude.Caption = "Aerodrome Altitude"
self.pnlAerodromeAltitude.LabelWidth = 150
self.pnlAerodromeAltitude.Value = Altitude(1000)
self.gbParameters.Add = self.pnlAerodromeAltitude
self.pnlIsa = NumberBoxPanel(self.gbParameters, "0.0")
self.pnlIsa.CaptionUnits = define._degreeStr + "C"
self.pnlIsa.Caption = "ISA"
self.pnlIsa.LabelWidth = 150
self.pnlIsa.Value = 15
self.gbParameters.Add = self.pnlIsa
self.pnlRDH = AltitudeBoxPanel(self.gbParameters)
self.pnlRDH.Caption = "RDH at THR"
self.pnlRDH.LabelWidth = 150
self.pnlRDH.Value = Altitude(15)
self.gbParameters.Add = self.pnlRDH
self.cmbVPA = ComboBoxPanel(self.gbParameters)
self.cmbVPA.Caption = "Vertical Path Angle[VPA]"
self.cmbVPA.LabelWidth = 150
self.gbParameters.Add = self.cmbVPA
self.cmbAircraftCategory = ComboBoxPanel(self.gbParameters)
self.cmbAircraftCategory.Caption = "Aircraft Category"
self.cmbAircraftCategory.LabelWidth = 150
self.gbParameters.Add = self.cmbAircraftCategory
self.pnlHeightLoss = AltitudeBoxPanel(self.gbParameters)
self.pnlHeightLoss.Caption = "Height Loss"
self.pnlHeightLoss.LabelWidth = 150
self.gbParameters.Add = self.pnlHeightLoss
self.pnlIas = SpeedBoxPanel(self.gbParameters)
self.pnlIas.Caption = "IAS"
self.pnlIas.LabelWidth = 150
self.pnlIas.Value = Speed(185)
self.gbParameters.Add = self.pnlIas
self.pnlTas = SpeedBoxPanel(self.gbParameters)
self.pnlTas.Caption = "TAS"
self.pnlTas.Enabled = False
self.pnlTas.LabelWidth = 150
self.gbParameters.Add = self.pnlTas
self.pnlWind = WindPanel(self.gbParameters)
self.pnlWind.LabelWidth = 145
self.gbParameters.Add = self.pnlWind
self.pnlSocAltitude = AltitudeBoxPanel(self.gbParameters)
self.pnlSocAltitude.Caption = "SOC Altitude"
self.pnlSocAltitude.LabelWidth = 150
self.gbParameters.Add = self.pnlSocAltitude
self.pnlDistXz = DistanceBoxPanel(self.gbParameters, DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistXz.Caption = "Xz Distance"
self.pnlDistXz.LabelWidth = 150
self.pnlDistXz.Button = None
self.pnlDistXz.Value = Distance(-900)
self.pnlDistXz.Enabled = False
self.gbParameters.Add = self.pnlDistXz
self.pnlDistOfFafDA = DistanceBoxPanel(self.gbParameters,
DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistOfFafDA.Caption = "FAP-DA Distance"
self.pnlDistOfFafDA.LabelWidth = 150
self.pnlDistOfFafDA.Button = None
self.pnlDistOfFafDA.Enabled = False
self.gbParameters.Add = self.pnlDistOfFafDA
self.pnlDistOfDaThr = DistanceBoxPanel(self.gbParameters,
DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistOfDaThr.Caption = "DA-THR Distance"
self.pnlDistOfDaThr.LabelWidth = 150
self.pnlDistOfDaThr.Button = None
self.pnlDistOfDaThr.Enabled = False
self.gbParameters.Add = self.pnlDistOfDaThr
self.pnlDistOfSocThr = DistanceBoxPanel(self.gbParameters,
DistanceUnits.M,
DistanceUnits.NM)
self.pnlDistOfSocThr.Caption = "SOC-THR Distance"
self.pnlDistOfSocThr.LabelWidth = 150
self.pnlDistOfSocThr.Button = None
self.pnlDistOfSocThr.Enabled = False
self.gbParameters.Add = self.pnlDistOfSocThr