def test_weighted_sum_operator(self, num_state_qubits, weights, input_x,
result):
""" weighted sum operator test """
# initialize weighted sum operator factory
warnings.filterwarnings('ignore', category=DeprecationWarning)
sum_op = WeightedSumOperator(num_state_qubits, weights)
warnings.filterwarnings('always', category=DeprecationWarning)
# initialize circuit
q = QuantumRegister(num_state_qubits +
sum_op.get_required_sum_qubits(weights))
if sum_op.required_ancillas() > 0:
q_a = QuantumRegister(sum_op.required_ancillas())
qc = QuantumCircuit(q, q_a)
else:
q_a = None
qc = QuantumCircuit(q)
# set initial state
for i, x in enumerate(input_x):
if x == 1:
qc.x(q[i])
# build circuit
sum_op.build(qc, q, q_a)
# run simulation
job = execute(qc,
BasicAer.get_backend('statevector_simulator'),
shots=1)
num_results = 0
value = None
for i, s_a in enumerate(job.result().get_statevector()):
if np.abs(s_a)**2 >= 1e-6:
num_results += 1
b_value = '{0:b}'.format(i).rjust(qc.width(), '0')
b_sum = b_value[(-len(q)):(-num_state_qubits)]
value = int(b_sum, 2)
# make sure there is only one result with non-zero amplitude
self.assertEqual(num_results, 1)
# compare to precomputed solution
self.assertEqual(value, result)
def test_conditional_value_at_risk(self, simulator):
""" conditional value at risk test """
# define backend to be used
backend = BasicAer.get_backend(simulator)
# set problem parameters
n_z = 2
z_max = 2
# z_values = np.linspace(-z_max, z_max, 2 ** n_z)
p_zeros = [0.15, 0.25]
rhos = [0.1, 0.05]
lgd = [1, 2]
k_l = len(p_zeros)
# alpha = 0.05
# set var value
var = 2
var_prob = 0.961940
# determine number of qubits required to represent total loss
# n_s = WeightedSumOperator.get_required_sum_qubits(lgd)
# create circuit factory (add Z qubits with weight/loss 0)
agg = WeightedSumOperator(n_z + k_l, [0] * n_z + lgd)
# define linear objective
breakpoints = [0, var]
slopes = [0, 1]
offsets = [0, 0] # subtract VaR and add it later to the estimate
f_min = 0
f_max = 3 - var
c_approx = 0.25
# construct circuit factory for uncertainty model (Gaussian Conditional Independence model)
gci = GCI(n_z, z_max, p_zeros, rhos)
cvar_objective = PwlObjective(
agg.num_sum_qubits,
0,
2**agg.num_sum_qubits -
1, # max value that can be reached by the qubit register
breakpoints,
slopes,
offsets,
f_min,
f_max,
c_approx)
multivariate_cvar = MultivariateProblem(gci, agg, cvar_objective)
num_qubits = multivariate_cvar.num_target_qubits
num_ancillas = multivariate_cvar.required_ancillas()
q = QuantumRegister(num_qubits, name='q')
q_a = QuantumRegister(num_ancillas, name='q_a')
qc = QuantumCircuit(q, q_a)
multivariate_cvar.build(qc, q, q_a)
job = execute(qc, backend=backend)
# evaluate resulting statevector
value = 0
for i, a_i in enumerate(job.result().get_statevector()):
b = ('{0:0%sb}' %
multivariate_cvar.num_target_qubits).\
format(i)[-multivariate_cvar.num_target_qubits:]
a_m = np.round(np.real(a_i), decimals=4)
if np.abs(a_m) > 1e-6 and b[0] == '1':
value += a_m**2
# normalize and add VaR to estimate
value = multivariate_cvar.value_to_estimation(value)
normalized_value = value / (1.0 - var_prob) + var
# compare to precomputed solution
self.assertEqual(0.0, np.round(normalized_value - 3.3796, decimals=4))
def test_asian_barrier_spread(self):
"""Test the asian barrier spread model."""
try:
from qiskit.aqua.circuits import WeightedSumOperator, FixedValueComparator as Comparator
from qiskit.aqua.components.uncertainty_problems import (
UnivariatePiecewiseLinearObjective as PwlObjective,
MultivariateProblem)
from qiskit.aqua.components.uncertainty_models import MultivariateLogNormalDistribution
except ImportError:
import warnings
warnings.warn(
'Qiskit Aqua is not installed, skipping the application test.')
return
# number of qubits per dimension to represent the uncertainty
num_uncertainty_qubits = 2
# parameters for considered random distribution
spot_price = 2.0 # initial spot price
volatility = 0.4 # volatility of 40%
interest_rate = 0.05 # annual interest rate of 5%
time_to_maturity = 40 / 365 # 40 days to maturity
# resulting parameters for log-normal distribution
# pylint: disable=invalid-name
mu = ((interest_rate - 0.5 * volatility**2) * time_to_maturity +
np.log(spot_price))
sigma = volatility * np.sqrt(time_to_maturity)
mean = np.exp(mu + sigma**2 / 2)
variance = (np.exp(sigma**2) - 1) * np.exp(2 * mu + sigma**2)
stddev = np.sqrt(variance)
# lowest and highest value considered for the spot price; in between,
# an equidistant discretization is considered.
low = np.maximum(0, mean - 3 * stddev)
high = mean + 3 * stddev
# map to higher dimensional distribution
# for simplicity assuming dimensions are independent and identically distributed)
dimension = 2
num_qubits = [num_uncertainty_qubits] * dimension
low = low * np.ones(dimension)
high = high * np.ones(dimension)
mu = mu * np.ones(dimension)
cov = sigma**2 * np.eye(dimension)
# construct circuit factory
distribution = MultivariateLogNormalDistribution(num_qubits=num_qubits,
low=low,
high=high,
mu=mu,
cov=cov)
# determine number of qubits required to represent total loss
weights = []
for n in num_qubits:
for i in range(n):
weights += [2**i]
num_sum_qubits = WeightedSumOperator.get_required_sum_qubits(weights)
# create circuit factoy
agg = WeightedSumOperator(sum(num_qubits), weights)
# set the strike price (should be within the low and the high value of the uncertainty)
strike_price_1 = 3
strike_price_2 = 4
# set the barrier threshold
barrier = 2.5
# map strike prices and barrier threshold from [low, high] to {0, ..., 2^n-1}
max_value = 2**num_sum_qubits - 1
low_ = low[0]
high_ = high[0]
mapped_strike_price_1 = (strike_price_1 - dimension*low_) / \
(high_ - low_) * (2**num_uncertainty_qubits - 1)
mapped_strike_price_2 = (strike_price_2 - dimension*low_) / \
(high_ - low_) * (2**num_uncertainty_qubits - 1)
mapped_barrier = (barrier -
low) / (high - low) * (2**num_uncertainty_qubits - 1)
conditions = []
for i in range(dimension):
# target dimension of random distribution and corresponding condition
conditions += [(i,
Comparator(num_qubits[i],
mapped_barrier[i] + 1,
geq=False))]
# set the approximation scaling for the payoff function
c_approx = 0.25
# setup piecewise linear objective fcuntion
breakpoints = [0, mapped_strike_price_1, mapped_strike_price_2]
slopes = [0, 1, 0]
offsets = [0, 0, mapped_strike_price_2 - mapped_strike_price_1]
f_min = 0
f_max = mapped_strike_price_2 - mapped_strike_price_1
bull_spread_objective = PwlObjective(num_sum_qubits, 0, max_value,
breakpoints, slopes, offsets,
f_min, f_max, c_approx)
# define overall multivariate problem
asian_barrier_spread = MultivariateProblem(distribution,
agg,
bull_spread_objective,
conditions=conditions)
num_req_qubits = asian_barrier_spread.num_target_qubits
num_req_ancillas = asian_barrier_spread.required_ancillas()
qr = QuantumRegister(num_req_qubits, name='q')
qr_ancilla = QuantumRegister(num_req_ancillas, name='q_a')
qc = QuantumCircuit(qr, qr_ancilla)
asian_barrier_spread.build(qc, qr, qr_ancilla)
job = execute(qc,
backend=BasicAer.get_backend('statevector_simulator'))
# evaluate resulting statevector
value = 0
for i, amplitude in enumerate(job.result().get_statevector()):
b = ('{0:0%sb}' % asian_barrier_spread.num_target_qubits
).format(i)[-asian_barrier_spread.num_target_qubits:]
prob = np.abs(amplitude)**2
if prob > 1e-4 and b[0] == '1':
value += prob
# all other states should have zero probability due to ancilla qubits
if i > 2**num_req_qubits:
break
# map value to original range
mapped_value = asian_barrier_spread.value_to_estimation(value) / (
2**num_uncertainty_qubits - 1) * (high_ - low_)
expected = 0.83188
self.assertAlmostEqual(mapped_value, expected, places=5)
# # tracer les results pour la probabilité par default
# plt.bar(range(K), p_default)
# plt.xlabel('Asset', size=15)
# plt.ylabel('probability (%)', size=15)
# plt.title('Individual Default Probabilities', size=20)
# plt.xticks(range(K), size=15)
# plt.yticks(size=15)
# plt.grid()
# plt.show()
#partie 2 estimation de la perte en utilisant QAE
print("calcul de VaR, Loss et CVar avec le QAE")
print("----------estimation de Expected Loss ------------")
# déterminer le nombre de qubits requis pour représenter la perte totale
n_s = WeightedSumOperator.get_required_sum_qubits(lgd)
# construire le circuit pour realiser la somme pondérée
agg = WeightedSumOperator(n_z + K, [0] * n_z + lgd)
# définition de la fonction Objective
breakpoints = [0]
slopes = [1]
offsets = [0]
f_min = 0
f_max = sum(lgd)
c_approx = 0.25
objective = UnivariatePiecewiseLinearObjective(
agg.num_sum_qubits,
0,
