def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
tc_name = args.name
if tc_name:
if not tc_name in qitoolchain.get_tc_names():
print "No such toolchain: ", tc_name
return
toolchain = qitoolchain.Toolchain(tc_name)
print toolchain
else:
for tc_name in tc_names:
toolchain = qitoolchain.Toolchain(tc_name)
print toolchain
print
def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
tc_name = args.name
if tc_name:
if not tc_name in qitoolchain.get_tc_names():
print "No such toolchain: ", tc_name
return
toolchain = qitoolchain.Toolchain(tc_name)
print toolchain
else:
for tc_name in tc_names:
toolchain = qitoolchain.Toolchain(tc_name)
print toolchain
print
def do(args):
"""Main entry point
"""
feed = args.feed
tc_name = args.name
if tc_name:
toolchain = qitoolchain.get_toolchain(tc_name)
if not feed:
feed = toolchain.feed_url
if not feed:
mess = "Could not find feed for toolchain %s\n" % tc_name
mess += "Please check configuration or " \
"specifiy a feed on the command line\n"
raise Exception(mess)
toolchain.update(feed)
else:
tc_names = qitoolchain.get_tc_names()
for i, tc_name in enumerate(tc_names, start=1):
toolchain = qitoolchain.toolchain.Toolchain(tc_name)
tc_feed = toolchain.feed_url
if not tc_feed:
ui.warning("No feed found for %s, skipping" % tc_name)
continue
ui.info(ui.green, "*", ui.reset, "(%i/%i)" % (i, len(tc_names)),
ui.green, "Updating", ui.blue, tc_name)
toolchain.update(tc_feed)
def do(args):
"""Main entry point
"""
feed = args.feed
tc_name = args.name
if tc_name:
toolchain = qitoolchain.get_toolchain(tc_name)
if not feed:
feed = toolchain.feed_url
if not feed:
mess = "Could not find feed for toolchain %s\n" % tc_name
mess += "Please check configuration or " \
"specifiy a feed on the command line\n"
raise Exception(mess)
toolchain.update(feed)
else:
tc_names = qitoolchain.get_tc_names()
for i, tc_name in enumerate(tc_names, start=1):
toolchain = qitoolchain.toolchain.Toolchain(tc_name)
tc_feed = toolchain.feed_url
if not tc_feed:
ui.warning("No feed found for %s, skipping" % tc_name)
continue
ui.info(ui.green, "*", ui.reset, "(%i/%i)" % (i, len(tc_names)),
ui.green, "Updating", ui.blue, tc_name)
toolchain.update(tc_feed)
def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
if not tc_names:
ui.info("No toolchain yet", "\n",
"Use `qitoolchain create` to create a new toolchain")
return
default_config = None
try:
build_worktree = qibuild.parsers.get_build_worktree(args)
default_config = build_worktree.default_config
except qisys.worktree.NotInWorkTree:
pass
ui.info("Known toolchains:")
for tc_name in tc_names:
if tc_name == default_config:
ui.info("*", tc_name)
else:
ui.info(" ", tc_name)
print
if default_config is not None:
ui.info("WorkTree", ui.green, build_worktree.root, ui.reset,
"is using", ui.blue, default_config, ui.reset,
"as its default toolchain.")
ui.info("Use ``qitoolchain info <tc_name>`` for more info")
def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
if not tc_names:
ui.info("No toolchain yet", "\n",
"Use `qitoolchain create` to create a new toolchain")
return
default_config = None
try:
build_worktree = qibuild.parsers.get_build_worktree(args)
default_config = build_worktree.default_config
except qisys.worktree.NotInWorkTree:
pass
ui.info("Known toolchains:")
for tc_name in tc_names:
if tc_name == default_config:
ui.info("*", tc_name)
else:
ui.info(" ", tc_name)
print
if default_config is not None:
ui.info("WorkTree", ui.green, build_worktree.root, ui.reset, "is using",
ui.blue, default_config, ui.reset,
"as its default toolchain.")
ui.info("Use ``qitoolchain info <tc_name>`` for more info")
def do(args):
""" Main entry point """
feed = args.feed
tc_name = args.name
if tc_name:
toolchain = qitoolchain.get_toolchain(tc_name)
if not feed:
feed = toolchain.feed_url
if not feed:
mess = "Could not find feed for toolchain %s\n" % tc_name
mess += "Please check configuration or " \
"specifiy a feed on the command line\n"
raise Exception(mess)
toolchain.update(feed, branch=args.branch, name=args.feed_name)
else:
tc_names = qitoolchain.get_tc_names()
tc_with_feed = [x for x in tc_names if qitoolchain.toolchain.Toolchain(x).feed_url]
tc_without_feed = list(set(tc_names) - set(tc_with_feed))
for i, tc_name in enumerate(tc_with_feed, start=1):
toolchain = qitoolchain.toolchain.Toolchain(tc_name)
tc_feed = toolchain.feed_url
ui.info(ui.green, "*", ui.reset, "(%i/%i)" % (i, len(tc_with_feed)),
ui.green, "Updating", ui.blue, tc_name, ui.reset, "with", ui.green,
tc_feed)
toolchain.update(tc_feed)
if tc_without_feed:
ui.info("These toolchains will be skipped because they have no feed:", ", ".join(tc_without_feed))
def do(args):
"""Main entry point
"""
feed = args.feed
tc_name = args.name
if tc_name:
toolchain = qitoolchain.get_toolchain(tc_name)
if not feed:
feed = toolchain.feed_url
if not feed:
mess = "Could not find feed for toolchain %s\n" % tc_name
mess += "Please check configuration or " \
"specifiy a feed on the command line\n"
raise Exception(mess)
toolchain.update(feed, branch=args.branch, name=args.feed_name)
else:
tc_names = qitoolchain.get_tc_names()
tc_with_feed = [x for x in tc_names if qitoolchain.toolchain.Toolchain(x).feed_url]
tc_without_feed = list(set(tc_names) - set(tc_with_feed))
for i, tc_name in enumerate(tc_with_feed, start=1):
toolchain = qitoolchain.toolchain.Toolchain(tc_name)
tc_feed = toolchain.feed_url
ui.info(ui.green, "*", ui.reset, "(%i/%i)" % (i, len(tc_with_feed)),
ui.green, "Updating", ui.blue, tc_name, ui.reset, "with", ui.green,
tc_feed)
toolchain.update(tc_feed)
if tc_without_feed:
ui.info("These toolchains will be skipped because they have no feed:", ", ".join(tc_without_feed))
def do(args):
"""Main entry point
"""
if "--name" in sys.argv:
ui.warning("--name is deprecated, use --feed-name instead")
feed = args.feed
# Normalize feed path:
if feed and os.path.exists(feed):
feed = qisys.sh.to_native_path(feed)
tc_name = args.name
# Validate the name: must be a valid filename:
bad_chars = r'<>:"/\|?*'
for bad_char in bad_chars:
if bad_char in tc_name:
mess = "Invalid toolchain name: '%s'\n" % tc_name
mess += "A valid toolchain name should not contain any "
mess += "of the following chars:\n"
mess += " ".join(bad_chars)
raise Exception(mess)
if tc_name in qitoolchain.get_tc_names():
toolchain = qitoolchain.Toolchain(tc_name) # pylint: disable=unused-variable
ui.info(tc_name, "already exists,", "updating without removing")
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
toolchain.update(feed, branch=args.branch, name=args.feed_name)
return toolchain
def do(args):
"""Main entry point
"""
feed = args.feed
tc_name = args.name
dry_run = args.dry_run
if tc_name:
toolchain = qitoolchain.get_toolchain(tc_name)
if not feed:
feed = qitoolchain.toolchain.get_tc_feed(tc_name)
if not feed:
mess = "Could not find feed for toolchain %s\n" % tc_name
mess += "Pleas check configuration or specifiy a feed on the command line\n"
raise Exception(mess)
ui.info(ui.green, "Updating toolchain", tc_name, "with", feed)
toolchain.parse_feed(feed, dry_run=dry_run)
else:
tc_names = qitoolchain.get_tc_names()
i = 0
for tc_name in tc_names:
i += 1
tc_feed = qitoolchain.toolchain.get_tc_feed(tc_name)
ui.info(ui.green, "*", ui.reset, "(%i/%i)" % (i, len(tc_names)),
ui.green, "Updating", ui.blue, tc_name)
if not tc_feed:
ui.warning("No feed found for %s, skipping" % tc_name)
continue
ui.info(ui.green, "Reading", tc_feed)
toolchain = qitoolchain.Toolchain(tc_name)
toolchain.parse_feed(tc_feed, dry_run=dry_run)
def do(args):
"""Main entry point
"""
if "--name" in sys.argv:
ui.warning("--name is deprecated, use --feed-name instead")
feed = args.feed
# Normalize feed path:
if feed and os.path.exists(feed):
feed = qisys.sh.to_native_path(feed)
tc_name = args.name
# Validate the name: must be a valid filename:
bad_chars = r'<>:"/\|?*'
for bad_char in bad_chars:
if bad_char in tc_name:
mess = "Invalid toolchain name: '%s'\n" % tc_name
mess += "A valid toolchain name should not contain any "
mess += "of the following chars:\n"
mess += " ".join(bad_chars)
raise Exception(mess)
build_worktree = None
if tc_name in qitoolchain.get_tc_names():
toolchain = qitoolchain.Toolchain(tc_name)
ui.info(tc_name, "already exists,",
"updating without removing")
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
toolchain.update(feed, branch=args.branch, name=args.feed_name)
return toolchain
def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
print "Known toolchains:"
for tc_name in tc_names:
print " ", tc_name
print
print "Use ``qitoolchain info <tc_name>`` for more info"
def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
print "Known toolchains:"
for tc_name in tc_names:
print " ", tc_name
print
print "Use ``qitoolchain info <tc_name>`` for more info"
def test_setup(self):
# Check that we are not modifying normal config
config_path = qitoolchain.get_tc_config_path()
expected = os.path.join(self.tmp, ".config", "qi", "toolchains.cfg")
self.assertEquals(config_path, expected)
# Check that there are no toolchain yet
tc_names = qitoolchain.get_tc_names()
self.assertEquals(tc_names, list())
def test_setup(self):
# Check that we are not modifying normal config
config_path = qitoolchain.get_tc_config_path()
expected = os.path.join(self.tmp, "config", "toolchains.cfg")
self.assertEquals(config_path, expected)
# Check that there are no toolchain yet
tc_names = qitoolchain.get_tc_names()
self.assertEquals(tc_names, list())
def do(args):
""" Main method """
if args.name:
tc_names = [args.name]
else:
tc_names = qitoolchain.get_tc_names()
for tc_name in tc_names:
toolchain = qitoolchain.get_toolchain(tc_name)
ui.info(str(toolchain))
def do(args):
""" Main method """
if args.name:
tc_names = [args.name]
else:
tc_names = qitoolchain.get_tc_names()
for tc_name in tc_names:
toolchain = qitoolchain.get_toolchain(tc_name)
ui.info(str(toolchain))
def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
if not tc_names:
ui.info("No toolchain yet", "\n",
"Use `qitoolchain create` to create a new toolchain")
return
ui.info("Known toolchains:")
for tc_name in tc_names:
ui.info("*", tc_name)
ui.info("Use ``qitoolchain info <tc_name>`` for more info")
def do(args): # pylint: disable=unused-argument
""" Main method """
tc_names = qitoolchain.get_tc_names()
if not tc_names:
ui.info("No toolchain yet", "\n",
"Use `qitoolchain create` to create a new toolchain")
return
ui.info("Known toolchains:")
for tc_name in tc_names:
ui.info("*", tc_name)
ui.info("Use ``qitoolchain info <tc_name>`` for more info")
def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
tc_name = args.name
if tc_name:
toolchain = qitoolchain.get_toolchain(tc_name)
print toolchain
else:
for tc_name in tc_names:
toolchain = qitoolchain.Toolchain(tc_name)
print toolchain
print
def do(args):
"""Main entry point
"""
feed = args.feed
tc_name = args.name
dry_run = args.dry_run
# Validate the name: must be a valid filename:
bad_chars = r'<>:"/\|?*'
for bad_char in bad_chars:
if bad_char in tc_name:
mess = "Invalid toolchain name: '%s'\n" % tc_name
mess += "A valid toolchain name should not contain any "
mess += "of the following chars:\n"
mess += " ".join(bad_chars)
raise Exception(mess)
if tc_name == "system":
raise Exception("'system' is a reserved name")
build_worktree = None
if args.default:
try:
build_worktree = qibuild.parsers.get_build_worktree(args)
except qisys.worktree.NotInWorkTree:
mess = "You need to be in a worktree to use --default"
raise Exception(mess)
if tc_name in qitoolchain.get_tc_names():
toolchain = qitoolchain.Toolchain(tc_name)
if feed and toolchain.feed != feed:
ui.warning(tc_name, "already exists but points to a different feed,",
"removing previous toolchain and creating a new one")
toolchain.remove()
else:
ui.info(tc_name, "already exists,",
"updating without removing")
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
ui.info(ui.green, "Updating toolchain", tc_name, "with feed:", feed)
toolchain.parse_feed(feed, dry_run=dry_run)
if args.default:
build_worktree.set_default_config(tc_name)
ui.info("Now using toolchain", ui.blue, tc_name, ui.reset, "by default")
else:
ui.info(ui.green, "Now try using", "\n"
" qibuild configure -c", ui.blue, tc_name, ui.green, "\n"
" qibuild make -c", ui.blue, tc_name)
return toolchain
def do(args):
"""Main entry point
"""
feed = args.feed
tc_name = args.name
# Validate the name: must be a valid filename:
bad_chars = r'<>:"/\|?*'
for bad_char in bad_chars:
if bad_char in tc_name:
mess = "Invalid toolchain name: '%s'\n" % tc_name
mess += "A valid toolchain name should not contain any "
mess += "of the following chars:\n"
mess += " ".join(bad_chars)
raise Exception(mess)
if tc_name == "system":
raise Exception("'system' is a reserved name")
build_worktree = None
if args.default:
try:
build_worktree = qibuild.parsers.get_build_worktree(args)
except qisys.worktree.NotInWorkTree:
mess = "You need to be in a worktree to use --default"
raise Exception(mess)
if tc_name in qitoolchain.get_tc_names():
toolchain = qitoolchain.Toolchain(tc_name)
if feed and toolchain.feed_url != feed:
ui.warning(tc_name,
"already exists but points to a different feed,",
"removing previous toolchain and creating a new one")
toolchain.remove()
else:
ui.info(tc_name, "already exists,", "updating without removing")
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
ui.info(ui.green, "Updating toolchain", tc_name, "with feed:", feed)
toolchain.update(feed)
if args.default:
build_worktree.set_default_config(tc_name)
ui.info("Now using toolchain", ui.blue, tc_name, ui.reset,
"by default")
else:
ui.info(ui.green, "Now try using", "\n"
" qibuild configure -c", ui.blue, tc_name, ui.green, "\n"
" qibuild make -c", ui.blue, tc_name)
return toolchain
def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
if not tc_names:
print "No toolchain yet"
print "Use `qitoolchain create` to create a new toolchain"
return
print "Known toolchains:"
for tc_name in tc_names:
print " ", tc_name
print
print "Use ``qitoolchain info <tc_name>`` for more info"
def configure_local_settings(toc):
""" Configure local settings for this worktree
"""
print
ui.info(ui.green, "::", ui.reset, "Found a worktree in", toc.worktree.root)
answer = qibuild.interact.ask_yes_no(
"Do you want to configure settings for this worktree",
default=True)
if not answer:
return
tc_names = qitoolchain.get_tc_names()
if tc_names:
ui.info(ui.green, "::", ui.reset,
"Found the following toolchains: ", ", ".join(tc_names))
answer = qibuild.interact.ask_yes_no(
"Use one of these toolchains by default",
default=True)
if answer:
default = qibuild.interact.ask_choice(tc_names,
"Choose a toolchain to use by default")
if default:
toc.config.local.defaults.config = default
toc.save_config()
answer = qibuild.interact.ask_yes_no(
"Do you want to use a unique build dir "
"(mandatory when using Eclipse)",
default=False)
build_dir = None
if answer:
build_dir = qibuild.interact.ask_string("Path to a build directory")
build_dir = os.path.expanduser(build_dir)
full_path = os.path.join(toc.worktree.root, build_dir)
ui.info(ui.green, "::", ui.reset,
"Will use", full_path, "as a root for all build directories")
toc.config.local.build.build_dir = build_dir
toc.save_config()
sdk_dir = None
answer = qibuild.interact.ask_yes_no(
"Do you want to use a unique SDK dir",
default=False)
if answer:
sdk_dir = qibuild.interact.ask_string("Path to a SDK directory")
sdk_dir = os.path.expanduser(sdk_dir)
full_path = os.path.join(toc.worktree.root, sdk_dir)
ui.info(ui.green, "::", ui.reset,
"Will use", full_path, "as a unique SDK directory")
toc.config.local.build.sdk_dir = sdk_dir
toc.save_config()
def do(args):
""" Main method """
tc_names = qitoolchain.get_tc_names()
if not tc_names:
print "No toolchain yet"
print "Use `qitoolchain create` to create a new toolchain"
return
default_toc_name = None
try:
worktree = qisys.worktree.open_worktree(args.worktree)
toc = qibuild.toc.Toc(worktree)
default_toc_name = toc.config.local.defaults.config
except qisys.worktree.NotInWorktree, e:
pass
def do(args):
""" Main entry point """
if "--name" in sys.argv:
ui.warning("--name is deprecated, use --feed-name instead")
feed = args.feed
# Normalize feed path:
if feed and os.path.exists(feed):
feed = qisys.sh.to_native_path(feed)
tc_name = args.name
qitoolchain.ensure_name_is_valid(tc_name)
if tc_name in qitoolchain.get_tc_names():
toolchain = qitoolchain.Toolchain(tc_name)
ui.info(tc_name, "already exists,", "updating without removing")
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
toolchain.update(feed, branch=args.branch, name=args.feed_name)
return toolchain
def do(args):
""" Main entry point """
if "--name" in sys.argv:
ui.warning("--name is deprecated, use --feed-name instead")
feed = args.feed
# Normalize feed path:
if feed and os.path.exists(feed):
feed = qisys.sh.to_native_path(feed)
tc_name = args.name
qitoolchain.ensure_name_is_valid(tc_name)
if tc_name in qitoolchain.get_tc_names():
toolchain = qitoolchain.Toolchain(tc_name)
ui.info(tc_name, "already exists,", "updating without removing")
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
toolchain.update(feed, branch=args.branch, name=args.feed_name)
return toolchain
def configure_local_settings(toc):
""" Configure local settings for this worktree
"""
print
print "Found a worktree in", toc.work_tree
answer = qibuild.interact.ask_yes_no(
"Do you want to configure settings for this worktree", default=True)
if not answer:
return
tc_names = qitoolchain.get_tc_names()
if tc_names:
print "Found the following toolchains: ", ", ".join(tc_names)
answer = qibuild.interact.ask_yes_no(
"Use one of these toolchains by default", default=True)
if answer:
default = qibuild.interact.ask_choice(
tc_names, "Choose a toolchain to use by default")
if default:
toc.config.local.defaults.config = default
toc.save_config()
answer = qibuild.interact.ask_yes_no(
"Do you want to use a unique build dir "
"(mandatory when using Eclipse)",
default=False)
build_dir = None
if answer:
build_dir = qibuild.interact.ask_string("Path to a build directory")
build_dir = os.path.expanduser(build_dir)
full_path = os.path.join(toc.work_tree, build_dir)
print "Will use", full_path, "as a root for all build directories"
toc.config.local.build.build_dir = build_dir
toc.save_config()
sdk_dir = None
answer = qibuild.interact.ask_yes_no("Do you want to use a unique SDK dir",
default=False)
if answer:
sdk_dir = qibuild.interact.ask_string("Path to a SDK directory")
sdk_dir = os.path.expanduser(sdk_dir)
full_path = os.path.join(toc.work_tree, sdk_dir)
print "Will use", full_path, "as a unique SDK directory"
toc.config.local.build.sdk_dir = sdk_dir
toc.save_config()
def configure_local_settings(build_worktree):
""" Configure local settings for this worktree
"""
print
worktree_root = build_worktree.root
ui.info(ui.green, "::", ui.reset, "Found a worktree in", worktree_root)
qibuild_cfg = build_worktree.qibuild_cfg
answer = qisys.interact.ask_yes_no(
"Do you want to configure settings for this worktree?",
default=False)
if not answer:
return
tc_names = qitoolchain.get_tc_names()
if tc_names:
ui.info(ui.green, "::", ui.reset,
"Found the following toolchains: ", ", ".join(tc_names))
answer = qisys.interact.ask_yes_no(
"Use one of these toolchains by default",
default=True)
if answer:
default = qisys.interact.ask_choice(tc_names,
"Choose a toolchain to use by default")
if default:
qibuild_cfg.local.defaults.config = default
qibuild_cfg.write_local_config(build_worktree.qibuild_xml)
answer = qisys.interact.ask_yes_no(
"Do you want to use a unique build dir?"
" (mandatory when using Eclipse)",
default=False)
build_dir = None
if answer:
build_dir = qisys.interact.ask_string("Path to a build directory")
build_dir = os.path.expanduser(build_dir)
full_path = os.path.join(worktree_root, build_dir)
ui.info(ui.green, "::", ui.reset,
"Will use", full_path, "as a root for all build directories")
qibuild_cfg.local.build.build_dir = build_dir
qibuild_cfg.write_local_config(build_worktree.qibuild_xml)
def do(args):
"""Main entry point
"""
feed = args.feed
if feed and not "://" in feed:
feed = qisys.sh.to_native_path(feed)
tc_name = args.name
# Validate the name: must be a valid filename:
bad_chars = r'<>:"/\|?*'
for bad_char in bad_chars:
if bad_char in tc_name:
mess = "Invalid toolchain name: '%s'\n" % tc_name
mess += "A valid toolchain name should not contain any "
mess += "of the following chars:\n"
mess += " ".join(bad_chars)
raise Exception(mess)
if tc_name == "system":
raise Exception("'system' is a reserved name")
build_worktree = None
if tc_name in qitoolchain.get_tc_names():
toolchain = qitoolchain.Toolchain(tc_name)
if feed and toolchain.feed_url != feed:
ui.warning(tc_name, "already exists but points to a different feed,",
"removing previous toolchain and creating a new one")
toolchain.remove()
else:
ui.info(tc_name, "already exists,",
"updating without removing")
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
toolchain.update(feed)
return toolchain
def do(args):
"""Main entry point
"""
feed = args.feed
if feed and not "://" in feed:
feed = qisys.sh.to_native_path(feed)
tc_name = args.name
# Validate the name: must be a valid filename:
bad_chars = r'<>:"/\|?*'
for bad_char in bad_chars:
if bad_char in tc_name:
mess = "Invalid toolchain name: '%s'\n" % tc_name
mess += "A valid toolchain name should not contain any "
mess += "of the following chars:\n"
mess += " ".join(bad_chars)
raise Exception(mess)
if tc_name == "system":
raise Exception("'system' is a reserved name")
build_worktree = None
if tc_name in qitoolchain.get_tc_names():
toolchain = qitoolchain.Toolchain(tc_name)
if feed and toolchain.feed_url != feed:
ui.warning(tc_name,
"already exists but points to a different feed,",
"removing previous toolchain and creating a new one")
toolchain.remove()
else:
ui.info(tc_name, "already exists,", "updating without removing")
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
toolchain.update(feed)
return toolchain
def configure_local_settings(build_worktree):
""" Configure local settings for this worktree
"""
print
worktree_root = build_worktree.root
ui.info(ui.green, "::", ui.reset, "Found a worktree in", worktree_root)
qibuild_cfg = build_worktree.qibuild_cfg
answer = qisys.interact.ask_yes_no(
"Do you want to configure settings for this worktree?", default=False)
if not answer:
return
tc_names = qitoolchain.get_tc_names()
if tc_names:
ui.info(ui.green, "::", ui.reset, "Found the following toolchains: ",
", ".join(tc_names))
answer = qisys.interact.ask_yes_no(
"Use one of these toolchains by default", default=True)
if answer:
default = qisys.interact.ask_choice(
tc_names, "Choose a toolchain to use by default")
if default:
qibuild_cfg.local.defaults.config = default
qibuild_cfg.write_local_config(build_worktree.qibuild_xml)
answer = qisys.interact.ask_yes_no(
"Do you want to use a unique build dir?"
" (mandatory when using Eclipse)",
default=False)
build_dir = None
if answer:
build_dir = qisys.interact.ask_string("Path to a build directory")
build_dir = os.path.expanduser(build_dir)
full_path = os.path.join(worktree_root, build_dir)
ui.info(ui.green, "::", ui.reset, "Will use", full_path,
"as a root for all build directories")
qibuild_cfg.local.build.build_dir = build_dir
qibuild_cfg.write_local_config(build_worktree.qibuild_xml)
def do(args):
"""Main entry point
"""
feed = args.feed
tc_name = args.name
dry_run = args.dry_run
known_tc_names = qitoolchain.toolchain.get_tc_names()
if tc_name:
if not tc_name in known_tc_names:
mess = "No such toolchain: '%s'\n" % tc_name
mess += "Known toolchains are: %s" % known_tc_names
raise Exception(mess)
if not feed:
feed = qitoolchain.toolchain.get_tc_feed(tc_name)
if not feed:
mess = "Could not find feed for toolchain %s\n" % tc_name
mess += "Pleas check configuration or specifiy a feed on the command line\n"
raise Exception(mess)
LOGGER.info("Updating toolchain %s using %s", tc_name, feed)
toolchain = qitoolchain.Toolchain(tc_name)
toolchain.parse_feed(feed, dry_run=dry_run)
else:
for tc_name in qitoolchain.get_tc_names():
tc_feed = qitoolchain.toolchain.get_tc_feed(tc_name)
if not tc_feed:
LOGGER.info("No feed found for %s, skipping", tc_name)
print
continue
LOGGER.info("###\n## Updating toolchain %s using %s\n##\n",
tc_name, tc_feed)
toolchain = qitoolchain.Toolchain(tc_name)
toolchain.parse_feed(tc_feed, dry_run=dry_run)
print
def do(args):
"""Main entry point
"""
feed = args.feed
tc_name = args.name
dry_run = args.dry_run
known_tc_names = qitoolchain.toolchain.get_tc_names()
if tc_name:
if not tc_name in known_tc_names:
mess = "No such toolchain: '%s'\n" % tc_name
mess += "Known toolchains are: %s" % known_tc_names
raise Exception(mess)
if not feed:
feed = qitoolchain.toolchain.get_tc_feed(tc_name)
if not feed:
mess = "Could not find feed for toolchain %s\n" % tc_name
mess += "Pleas check configuration or specifiy a feed on the command line\n"
raise Exception(mess)
LOGGER.info("Updating toolchain %s using %s", tc_name, feed)
toolchain = qitoolchain.Toolchain(tc_name)
toolchain.parse_feed(feed, dry_run=dry_run)
else:
for tc_name in qitoolchain.get_tc_names():
tc_feed = qitoolchain.toolchain.get_tc_feed(tc_name)
if not tc_feed:
LOGGER.info("No feed found for %s, skipping", tc_name)
print
continue
LOGGER.info("###\n## Updating toolchain %s using %s\n##\n",
tc_name, tc_feed)
toolchain = qitoolchain.Toolchain(tc_name)
toolchain.parse_feed(tc_feed, dry_run=dry_run)
print
if tc_name == "system":
raise Exception("'system' is a reserved name")
toc = None
if args.default:
try:
toc = qibuild.toc.toc_open(args.work_tree)
except qibuild.toc.TocException, e:
mess = "You need to be in a valid toc worktree to use --default\n"
mess += "Exception was:\n"
mess += str(e)
raise Exception(mess)
if tc_name in qitoolchain.get_tc_names():
LOGGER.info(
"%s already exists, removing previous "
"toolchain and creating a new one", tc_name)
toolchain = qitoolchain.Toolchain(tc_name)
toolchain.remove()
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
toolchain.parse_feed(feed, dry_run=dry_run)
if args.default:
toc.config.set_default_config(tc_name)
toc.save_config()
LOGGER.info("Now using toolchain %s by default", tc_name)
else:
def __init__(self,
work_tree,
path_hints=None,
config=None,
qibuild_cfg=None,
build_type="Debug",
cmake_flags=None,
cmake_generator=None,
active_projects=None,
solve_deps=True):
"""
Create a new Toc object. Most of the keyargs come directly from
the command line. (--wortree, --debug, -c, etc.)
:param work_tree: see :py:meth:`qibuild.worktree.WorkTree.__init__`
:param path_hints: see :py:meth:`qibuild.worktree.WorkTree.__init__`
:param qibuild_cfg: a :py:class:`qibuild.config.QiBuildConfig` instance
if not given, a new one will be created
:param build_type: a build type, could be debug or release
(defaults to debug)
:param cmake_flags: optional additional cmake flags
:param cmake_generator: optional cmake generator
(defaults to Unix Makefiles)
:param active_projects: the projects excplicitely specified by user
"""
WorkTree.__init__(self, work_tree, path_hints=path_hints)
# The local config file in which to write
self.config_path = os.path.join(self.work_tree, ".qi", "qibuild.xml")
# When you are running toc actions for a qibuild project, sometimes
# a Toc object is created on the fly (Using toc_open with a non
# empty path_hints) variable.
# In this case, the .qi directory may not even exists, nor the
# .qi directory, so create it:
if not os.path.exists(self.config_path):
to_create = os.path.dirname(self.config_path)
qibuild.sh.mkdir(to_create, recursive=True)
with open(self.config_path, "w") as fp:
fp.write("<qibuild />\n")
# Perform format conversion if necessary
handle_old_qibuild_cfg(self.work_tree)
handle_old_qibuild_xml(self.work_tree)
# Handle config:
if not qibuild_cfg:
self.config = qibuild.config.QiBuildConfig(config)
self.config.read()
else:
self.config = config
self.config.read_local_config(self.config_path)
self.active_config = self.config.active_config
# Special case if "--system" was used:
if config == "system":
self.active_config = None
self.build_type = build_type
if not self.build_type:
self.build_type = "Debug"
self.cmake_generator = cmake_generator
self.build_folder_name = None
# Set build environment
envsetter = qibuild.envsetter.EnvSetter()
envsetter.read_config(self.config)
self.build_env = envsetter.get_build_env()
# List of objects of type qibuild.project.Project,
# this is updated using WorkTree.buildable_projects
self.projects = list()
# The list of projects the user asked for from command
# line.
# Set by toc_open()
if not active_projects:
self.active_projects = list()
else:
self.active_projects = active_projects
self.solve_deps = solve_deps
# Set cmake generator if user has not set if in Toc ctor:
if not self.cmake_generator:
self.cmake_generator = self.config.cmake.generator
if not self.cmake_generator:
self.cmake_generator = "Unix Makefiles"
# Read the current config, create toolchain and pacakges object
# if necessary
self.packages = list()
self.toolchain = None
if self.active_config is not None:
if self.active_config in qitoolchain.get_tc_names():
self.toolchain = qitoolchain.Toolchain(self.active_config)
self.packages = self.toolchain.packages
else:
# The config does not match a toolchain
local_dir = os.path.join(self.work_tree, ".qi")
local_cmake = os.path.join(local_dir,
"%s.cmake" % self.active_config)
if not os.path.exists(local_cmake):
mess = """Invalid configuration {active_config}
* No toolchain named {active_config}. Known toolchains are:
{tc_names}
* No custom cmake file for config {active_config} found.
(looked in {local_cmake})
"""
mess = mess.format(active_config=self.active_config,
local_cmake=local_cmake,
tc_names=qitoolchain.get_tc_names())
if self.active_config == self.config.local.defaults.config:
mess += """Note: this is your default config
You may want to run:
* `qibuild init --force` (to re-initialize your worktree and not use any toolchain)
* `qibuild init --force` --config=<config> (to use a different toolchain by default)
"""
raise WrongDefaultException(mess)
else:
raise Exception(mess)
# Useful vars to cope with Visual Studio quirks
self.using_visual_studio = "Visual Studio" in self.cmake_generator
self.vc_version = self.cmake_generator.split()[-1]
# The actual list of cmake flags we are going to use
# will be computed during self.update_projects
# Right now, we will just store the flags passed in ctor
# in self.user_cmake_flags, to be sure they are always added
# at the end of the list of flags
if cmake_flags:
self.user_cmake_flags = cmake_flags[:]
else:
self.user_cmake_flags = list()
# Finally, update the build configuration of all the projects
# (this way we are sure that the build configuration is the same for
# every project)
self.update_projects()
raise Exception(mess)
toc_error = None
toc = None
try:
toc = qibuild.toc.toc_open(args.work_tree)
except qibuild.toc.TocException, e:
toc_error = e
if args.default and not toc:
mess = "You need to be in a valid toc worktree to use --default\n"
mess += "Exception was:\n"
mess += str(toc_error)
raise Exception(mess)
if tc_name in qitoolchain.get_tc_names():
LOGGER.info("%s already exists, creating a new one", tc_name)
toolchain = qitoolchain.Toolchain(tc_name)
toolchain.remove()
toolchain = qitoolchain.Toolchain(tc_name)
if feed:
toolchain.parse_feed(feed, dry_run=dry_run)
cmake_generator = args.cmake_generator
qibuild_cfg = qibuild.config.QiBuildConfig()
qibuild_cfg.read()
config = qibuild.config.Config()
config.name = tc_name
if cmake_generator:
config.cmake.generator = cmake_generator
def __init__(self, worktree,
config=None,
qibuild_cfg=None,
build_type="Debug",
cmake_flags=None,
profiles=None,
cmake_generator=None):
"""
Create a new Toc object. Most of the keyargs come directly from
the command line. (--worktree, --debug, -c, etc.)
:param worktree: see :py:meth:`qisys.worktree.WorkTree.__init__`
:param qibuild_cfg: a :py:class:`qibuild.config.QiBuildConfig` instance
if not given, a new one will be created
:param build_type: a build type, could be debug or release
(defaults to debug)
:param cmake_flags: optional additional cmake flags
:param cmake_generator: optional cmake generator
(defaults to Unix Makefiles)
"""
# Set during qibuild.cmdparse.projects_from_args and
# used by get_sdk_dirs().
# Why? Assume you have hello depending on world, which is both
# a project and a pacakge.
# qc hello -> get_sdk_dirs('hello') = []
# qc world hello -> get_sdk_dirs('hello') = ["world/build/sdk"]
self.active_projects = list()
self.worktree = worktree
# The local config file in which to write
dot_qi = os.path.join(self.worktree.root, ".qi")
qisys.sh.mkdir(dot_qi)
self.config_path = os.path.join(dot_qi, "qibuild.xml")
if not os.path.exists(self.config_path):
with open(self.config_path, "w") as fp:
fp.write("<qibuild />\n")
# Perform format conversion if necessary
handle_old_qibuild_cfg(self.worktree.root)
handle_old_qibuild_xml(self.worktree.root)
# Handle config:
if not qibuild_cfg:
self.config = qibuild.config.QiBuildConfig(config)
self.config.read()
else:
self.config = config
self.config.read_local_config(self.config_path)
self.active_config = self.config.active_config
# Special case if "--system" was used:
if config == "system":
self.active_config = None
self.local_cmake = None
if self.active_config:
local_dir = os.path.join(worktree.root, ".qi")
local_cmake = os.path.join(local_dir, "%s.cmake" % self.active_config)
if os.path.exists(local_cmake):
self.local_cmake = local_cmake
self.build_type = build_type
if not self.build_type:
self.build_type = "Debug"
self.cmake_generator = cmake_generator
self.build_folder_name = None
# Set build environment
envsetter = qisys.envsetter.EnvSetter()
envsetter.read_config(self.config)
self.build_env = envsetter.get_build_env()
# List of objects of type qibuild.project.Project,
# this is updated using WorkTree.buildable_projects
self.projects = list()
# Set cmake generator if user has not set if in Toc ctor:
if not self.cmake_generator:
self.cmake_generator = self.config.cmake.generator
if not self.cmake_generator:
self.cmake_generator = "Unix Makefiles"
# Read the current config, create toolchain and pacakges object
# if necessary
self.packages = list()
self.toolchain = None
if self.active_config is not None:
if self.active_config in qitoolchain.get_tc_names():
self.toolchain = qitoolchain.Toolchain(self.active_config)
self.packages = self.toolchain.packages
else:
# The config does not match a toolchain
local_dir = os.path.join(self.worktree.root, ".qi")
local_cmake = os.path.join(local_dir, "%s.cmake" % self.active_config)
if not os.path.exists(local_cmake):
mess = """Invalid configuration {active_config}
* No toolchain named {active_config}. Known toolchains are:
{tc_names}
* No custom cmake file for config {active_config} found.
(looked in {local_cmake})
"""
mess = mess.format(active_config=self.active_config,
local_cmake = local_cmake,
tc_names = qitoolchain.get_tc_names())
if self.active_config == self.config.local.defaults.config:
mess += """Note: this is your default config
You may want to run:
qibuild init --force -w {worktree.root}
(to re-initialize your worktree and not use any toolchain)
qibuild init --force -w {worktree.root} --config=<config>
(to use a different toolchain by default)
"""
mess = mess.format(worktree=self.worktree)
raise WrongDefaultException(mess)
else:
raise Exception(mess)
if self.toolchain:
self.packages = self.toolchain.packages
else:
self.packages = list()
# Useful vars to cope with Visual Studio quirks
self.using_visual_studio = "Visual Studio" in self.cmake_generator
self.vc_version = self.cmake_generator.split()[-1]
# The actual list of cmake flags we are going to use
# will be computed during self.update_projects
# Right now, we will just store the flags passed in ctor
# in self.user_cmake_flags, to be sure they are always added
# at the end of the list of flags
if cmake_flags:
self.user_cmake_flags = cmake_flags[:]
else:
self.user_cmake_flags = list()
self.profiles = list()
self.apply_profiles(profiles)
# Finally, update the build configuration of all the projects
# (this way we are sure that the build configuration is the same for
# every project)
self.update_projects()
def test_create_toolchain(self):
qitoolchain.Toolchain("foo")
self.assertEquals(qitoolchain.get_tc_names(), ["foo"])
def test_remove_toolchain(self):
tc = qitoolchain.Toolchain("foo")
self.assertEquals(qitoolchain.get_tc_names(), ["foo"])
tc.remove()
self.assertEquals(qitoolchain.get_tc_names(), list())
def test_remove_toolchain(self):
tc = qitoolchain.Toolchain("foo")
self.assertEquals(qitoolchain.get_tc_names(), ["foo"])
tc.remove()
self.assertEquals(qitoolchain.get_tc_names(), list())
def test_create_toolchain(self):
qitoolchain.Toolchain("foo")
self.assertEquals(qitoolchain.get_tc_names(), ["foo"])
def __init__(self, work_tree,
path_hints=None,
config=None,
build_type="debug",
cmake_flags=None,
cmake_generator=None,
active_projects=None,
solve_deps=True):
"""
Create a new Toc object. Most of the keyargs come directly from
the command line. (--wortree, --debug, -c, etc.)
:param work_tree: see :py:meth:`qibuild.worktree.WorkTree.__init__`
:param path_hints: see :py:meth:`qibuild.worktree.WorkTree.__init__`
:param build_type: a build type, could be debug or release
(defaults to debug)
:param cmake_flags: optional additional cmake flags
:param cmake_generator: optional cmake generator
(defaults to Unix Makefiles)
:param active_projects: the projects excplicitely specified by user
"""
WorkTree.__init__(self, work_tree, path_hints=path_hints)
# The local config file in which to write
self.config_path = os.path.join(self.work_tree, ".qi", "qibuild.xml")
# When you are running toc actions for a qibuild project, sometimes
# a Toc object is created on the fly (Using toc_open with a non
# empty path_hints) variable.
# In this case, the .qi directory may not even exists, nor the
# .qi directory, so create it:
if not os.path.exists(self.config_path):
to_create = os.path.dirname(self.config_path)
qibuild.sh.mkdir(to_create, recursive=True)
with open(self.config_path, "w") as fp:
fp.write("<qibuild />\n")
# Perform format conversion if necessary
handle_old_qibuild_cfg(self.work_tree)
handle_old_qibuild_xml(self.work_tree)
# Handle config:
self.config = qibuild.config.QiBuildConfig(config)
self.config.read()
self.config.read_local_config(self.config_path)
self.active_config = self.config.active_config
self.build_type = build_type
if not self.build_type:
self.build_type = "debug"
# The cmake flags set by the user will always be added
# to the actual cmake flags used by the Toc oject,
# but we may add other flags when using a toolchain.
# see self.update_cmake_flags()
self.cmake_flags = list()
self.cmake_generator = cmake_generator
self.build_folder_name = None
# Set build environment
envsetter = qibuild.envsetter.EnvSetter()
envsetter.read_config(self.config)
self.build_env = envsetter.get_build_env()
# List of objects of type qibuild.project.Project,
# this is updated using WorkTree.buildable_projects
self.projects = list()
# The list of projects the user asked for from command
# line.
# Set by toc_open()
if not active_projects:
self.active_projects = list()
else:
self.active_projects = active_projects
self.solve_deps = solve_deps
# Set cmake generator if user has not set if in Toc ctor:
if not self.cmake_generator:
self.cmake_generator = self.config.cmake.generator
if not self.cmake_generator:
self.cmake_generator = "Unix Makefiles"
# Read the current config, create toolchain and pacakges object
# if necessary
self.packages = list()
self.toolchain = None
if self.active_config is not None:
if self.active_config in qitoolchain.get_tc_names():
self.toolchain = qitoolchain.Toolchain(self.active_config)
self.packages = self.toolchain.packages
else:
# The config does not match a toolchain
local_dir = os.path.join(self.work_tree, ".qi")
local_cmake = os.path.join(local_dir, "%s.cmake" % self.active_config)
if not os.path.exists(local_cmake):
mess = """Invalid configuration {active_config}
* No toolchain named {active_config}. Known toolchains are:
{tc_names}
* No custom cmake file for config {active_config} found.
(looked in {local_cmake})
"""
raise TocException(mess.format(active_config=self.active_config,
local_cmake = local_cmake,
tc_names = qitoolchain.get_tc_names()))
# Useful vars to cope with Visual Studio quirks
self.using_visual_studio = "Visual Studio" in self.cmake_generator
self.vc_version = self.cmake_generator.split()[-1]
# The actual list of cmake flags we are going to use
# will be computed during self.configure_project.
# Right now, we will just store the flags passed in ctor
# in self.user_cmake_flags, to be sure they are always added
# at the end of the list of flags
if cmake_flags:
self.user_cmake_flags = cmake_flags[:]
else:
self.user_cmake_flags = list()
# Finally, update the build configuration of all the projects
# (this way we are sure that the build configuration is the same for
# every project)
self.update_projects()