def init(self):
"""docstring for init"""
self.log.write(self.message["enter"])
self.session = Qsession(self.log)
self.timeout = self.config["timeout"]
self.max_buf_size = self.config["bufsize"]
# ASTMPHandler 的默认状态是一直接收数据, 当ibuffer中数据大于限定值时,
# 由collect_incomming_data() 负责调用found_terminator()
self.set_terminator("\r\n")
def __init__(self, conn, addr, log, message, json_config):
self.conn = conn
self.addr = addr
self.log = log
self.message = message
self.config = json_config
self.session = Qsession(log)
self.timeout = self.config["timeout"]
self.bufsize = self.config["bufsize"]
class TSTMPMachine:
"""docstring for STMPMachine"""
def __init__(self, conn, addr, logger, message, json_config):
self.conn = conn
self.addr = addr
self.logger = logger
self.message = message
self.config = json_config
self.session = Qsession(logger)
self.timeout = self.config["timeout"]
self.bufsize = self.config["bufsize"]
def write(self, msg):
self.conn.send(msg)
def read(self):
try:
# we only need to monitor the timeout for
# reading data from client socket
self.conn.settimeout(self.timeout)
data = self.conn.recv(self.bufsize)
self.conn.settimeout(None)
except socket.timeout:
self.logger.write(self.message["timeout"])
data = None
return data
def close(self):
self.conn.close()
##
# @brief
#
# @return
def run(self):
try:
self.logger.write(self.message["enter"])
is_continue = True
while is_continue:
data = self.read()
if data is None:
break
response, is_continue = self.session.feed(data)
if response is not None:
self.write(response)
self.logger.write(self.message["exit"])
self.close()
except:
self.logger.write("Unexpected error: {0}".format(sys.exc_info())[0])
class STMPMachine:
"""docstring for STMPMachine"""
def __init__(self, conn, addr, log, message, json_config):
self.conn = conn
self.addr = addr
self.log = log
self.message = message
self.config = json_config
self.session = Qsession(log)
self.timeout = self.config["timeout"]
self.bufsize = self.config["bufsize"]
def write(self, msg):
self.send(msg)
def read(self):
# timeout 只有在接收用户数据时候需要考虑
self.conn.settimeout(self.timeout)
try:
data = self.conn.recv(bufsize)
except socket.timeout:
# 直接设置为None, data中应该没有数据??
self.log.write(self.message["timeout"])
data = None
self.conn.settimeout(None)
return data
def close(self):
self.conn.close()
def run(self):
self.log.write(self.message["enter"])
is_continue = True
while is_continue:
data = self.read()
# read None 意味着超时
if data is None:
break
response, is_continue = self.session.feed(data)
if response is not None:
self.write(response)
self.log.write(self.message["exit"])
self.close()
def __init__(self, sock, addr, message, json_config, logger):
# calling the super class __init__
asynchat.async_chat.__init__(self, sock=sock)
self.addr = addr
self.ibuffer = []
self.config = json_config
self.message = message
self.logger = logger
# as a handler in stmp server, we expected the message
# sending from server will be small.
self.ac_out_buffer_size = 512
self.timeout = self.config["timeout"]
self.max_buf_size = self.config["bufsize"]
# usually, we won't use "\r\n" as the terminator in
# stmp protocol, but, for simplicity.
self.set_terminator("\r\n")
# log a user enter
self.session = Qsession(self.logger)
self.logger.write(self.message["enter"])
class ASTMPHandler(asynchat.async_chat):
"""docstring for STMPHandler"""
def __init__(self, sock, addr, message, json_config, logger):
# calling the super class __init__
asynchat.async_chat.__init__(self, sock=sock)
self.addr = addr
self.ibuffer = []
self.config = json_config
self.message = message
self.logger = logger
# as a handler in stmp server, we expected the message
# sending from server will be small.
self.ac_out_buffer_size = 512
self.timeout = self.config["timeout"]
self.max_buf_size = self.config["bufsize"]
# usually, we won't use "\r\n" as the terminator in
# stmp protocol, but, for simplicity.
self.set_terminator("\r\n")
# log a user enter
self.session = Qsession(self.logger)
self.logger.write(self.message["enter"])
##
# @brief
#
# @param data the receiving data
#
# @return None
def collect_incoming_data(self, data):
self.ibuffer.append(data)
if len(self.ibuffer) >= self.max_buf_size:
self.found_terminator()
##
# @brief
# There are only two available situation this function
# will be called.
# 1. async_chat meet the terminator;
# 2. the self.ibuffer contain too many data.
# @return None
def found_terminator(self):
data = "".join(self.ibuffer)
# we say the self.ibuffer have been consumed.
self.ibuffer = []
# The session (Qsession) will give response based on
# the given data.
# 1. response will send back to client;
# 2. is_continue tell handler that is this connection should
# be closed ?
response, is_continue = self.session.feed(data)
if response is not None:
self.push(response)
if not is_continue:
self.close_when_done()
def handle_close(self):
self.logger.write(self.message["exit"])
asynchat.async_chat.handle_close(self)
def handle_read(self):
try:
self.settimeout(self.timeout)
ret = asynchat.async_chat.handle_read(self)
# we only need timeout work when read the data from client
self.settimeout(None)
except socket.timeout:
self.logger.write(self.message["timeout"])
self.close_when_done()
return ret
def setUp(self):
"""docstring for setup"""
log = open("./test.log", "w")
self.session = Qsession(log)
class QsessionTest(unittest.TestCase):
"""docstring for QsessionTest"""
def setUp(self):
"""docstring for setup"""
log = open("./test.log", "w")
self.session = Qsession(log)
def test_writeFile(self):
"""docstring for test_writeFile"""
self.session.filename = "session_test"
msg = "QSESSION TEST"
self.session.mail_content = msg
self.session.writeFile()
with open(self.session.filename) as stream:
for line in stream.readlines():
self.assertEqual(line, msg, \
"file msg {0} should be equal with {1}".format(line, msg))
def test_is_addr_valid(self):
"""docstring for is_addr_valid"""
filename = "invalid_mail_address"
with open(filename, "r") as stream:
for address in stream.readlines():
self.assertEqual(False, self.session.is_addr_valid(address))
filename = "valid_mail_address"
with open(filename, "r") as stream:
for address in stream.readlines():
self.assertEqual(True, self.session.is_addr_valid(address))
def test_checkFormal(self):
"""docstring for test_checkFormal"""
filename = "valid_check_formal"
# format: cmd session_value data expected_ret
with open(filename, "r") as stream:
for line in stream.readlines():
items = line.split(",")
items = map(lambda x: x.strip(), items)
cmd = items[0]
if cmd == "0":
self.session.mail_from = items[1]
ret = self.session.checkFormal(items[2], int(cmd))
self.assertEqual(ret, bool(items[3]))
elif cmd == "1":
self.session.mail_to = items[1]
ret = self.session.checkFormal(items[2], int(cmd))
self.assertEqual(ret, bool(items[3]))
elif cmd == "2":
ret = self.session.checkFormal(items[1], int(cmd))
self.assertEqual(ret, bool(items[2]))
elif cmd == "3":
ret = self.session.checkFormal(items[1], int(cmd))
self.assertEqual(ret, bool(items[2]))
def test_feed(self):
"""docstring for test_feed"""
infile = "test_feed_request"
outfile = "test_feed_response"
with open(infile, "r") as instream:
with open(outfile, "r") as outstream:
request = map(lambda x: x+"\r\n", instream.read().split("\r\n"))
response = outstream.read().split("\n")
for i in range(len(request)):
ret = self.session.feed(request[i])
self.assertEqual(ret[0], response[i])
class ASTMPHandler(asynchat.async_chat):
"""docstring for STMPHandler"""
def __init__(self, sock, addr, message, json_config):
asynchat.async_chat.__init__(self, sock=sock)
# 创建STMP 日志对象
self.addr = addr
self.ibuffer = []
self.config = json_config
self.message = message
self.log = STMPLog(logging.getLogger(self.config["server_name"]), self.addr)
# 服务器回应数据很小
self.ac_out_buffer_size = 512
self.init()
# 初始终止条件
# self.set_terminator("\r\n")
def init(self):
"""docstring for init"""
self.log.write(self.message["enter"])
self.session = Qsession(self.log)
self.timeout = self.config["timeout"]
self.max_buf_size = self.config["bufsize"]
# ASTMPHandler 的默认状态是一直接收数据, 当ibuffer中数据大于限定值时,
# 由collect_incomming_data() 负责调用found_terminator()
self.set_terminator("\r\n")
##
# @brief
#
# @param data
#
# @return
def collect_incoming_data(self, data):
"""docstring for collect_incoming_data"""
self.ibuffer.append(data)
if len(self.ibuffer) >= self.max_buf_size:
self.found_terminator()
##
# @brief
#
# @return
def found_terminator(self):
# 形成字串, 清空ibuffer
data = "".join(self.ibuffer)
self.ibuffer = []
# Qsession 负责STMP协议的逻辑部分
response, is_continue = self.session.feed(data)
# response 为None时表示本次无需响应, 可能是由于当前待
# 接收数据不完整
if response is not None:
self.push(response)
if not is_continue:
# 执行关闭, 效果是待发送数据发送完毕, 则关闭对应链接
self.close_when_done()
def handle_close(self):
self.log.write(self.message["exit"])
super(ASTMPHandler, self).handle_close()
def handle_read(self):
# timeout 只有在接收用户数据时候需要考虑
self.settimeout(self.timeout)
try:
ret = super(ASTMPHandler, self).handle_read()
except socket.timeout:
self.log.write("timeout")
self.close_when_done()
self.settimeout(None)
return ret