def __duplicate_line_or_selection(self, after_current_line=True):
"""Duplicate current line or selected text"""
cursor = self.textCursor()
cursor.beginEditBlock()
cur_pos = cursor.position()
start_pos, end_pos = self.__save_selection()
end_pos_orig = end_pos
if to_text_string(cursor.selectedText()):
cursor.setPosition(end_pos)
# Check if end_pos is at the start of a block: if so, starting
# changes from the previous block
cursor.movePosition(QTextCursor.StartOfBlock,
QTextCursor.KeepAnchor)
if not to_text_string(cursor.selectedText()):
cursor.movePosition(QTextCursor.PreviousBlock)
end_pos = cursor.position()
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
while cursor.position() <= end_pos:
cursor.movePosition(QTextCursor.EndOfBlock, QTextCursor.KeepAnchor)
if cursor.atEnd():
cursor_temp = QTextCursor(cursor)
cursor_temp.clearSelection()
cursor_temp.insertText(self.get_line_separator())
break
cursor.movePosition(QTextCursor.NextBlock, QTextCursor.KeepAnchor)
text = cursor.selectedText()
cursor.clearSelection()
if not after_current_line:
# Moving cursor before current line/selected text
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
start_pos += len(text)
end_pos_orig += len(text)
cur_pos += len(text)
# We save the end and start position of the selection, so that it
# can be restored within the paint event that is triggered by the
# text insertion. This is done to prevent a graphical glitch that
# occurs when text gets inserted at the current position of the cursor.
# See spyder-ide/spyder#11089 for more info.
if cur_pos == start_pos:
self._restore_selection_pos = (end_pos_orig, start_pos)
else:
self._restore_selection_pos = (start_pos, end_pos_orig)
cursor.insertText(text)
cursor.endEditBlock()
self.document_did_change()
def __duplicate_line_or_selection(self, after_current_line=True):
"""Duplicate current line or selected text"""
cursor = self.textCursor()
cursor.beginEditBlock()
cur_pos = cursor.position()
start_pos, end_pos = self.__save_selection()
end_pos_orig = end_pos
if to_text_string(cursor.selectedText()):
cursor.setPosition(end_pos)
# Check if end_pos is at the start of a block: if so, starting
# changes from the previous block
cursor.movePosition(QTextCursor.StartOfBlock,
QTextCursor.KeepAnchor)
if not to_text_string(cursor.selectedText()):
cursor.movePosition(QTextCursor.PreviousBlock)
end_pos = cursor.position()
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
while cursor.position() <= end_pos:
cursor.movePosition(QTextCursor.EndOfBlock, QTextCursor.KeepAnchor)
if cursor.atEnd():
cursor_temp = QTextCursor(cursor)
cursor_temp.clearSelection()
cursor_temp.insertText(self.get_line_separator())
break
cursor.movePosition(QTextCursor.NextBlock, QTextCursor.KeepAnchor)
text = cursor.selectedText()
cursor.clearSelection()
if not after_current_line:
# Moving cursor before current line/selected text
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
start_pos += len(text)
end_pos_orig += len(text)
cur_pos += len(text)
cursor.insertText(text)
cursor.endEditBlock()
self.setTextCursor(cursor)
if cur_pos == start_pos:
self.__restore_selection(end_pos_orig, start_pos)
else:
self.__restore_selection(start_pos, end_pos_orig)
def __duplicate_line_or_selection(self, after_current_line=True):
"""Duplicate current line or selected text"""
cursor = self.textCursor()
cursor.beginEditBlock()
start_pos, end_pos = self.__save_selection()
if to_text_string(cursor.selectedText()):
cursor.setPosition(end_pos)
# Check if end_pos is at the start of a block: if so, starting
# changes from the previous block
cursor.movePosition(QTextCursor.StartOfBlock,
QTextCursor.KeepAnchor)
if not to_text_string(cursor.selectedText()):
cursor.movePosition(QTextCursor.PreviousBlock)
end_pos = cursor.position()
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
while cursor.position() <= end_pos:
cursor.movePosition(QTextCursor.EndOfBlock, QTextCursor.KeepAnchor)
if cursor.atEnd():
cursor_temp = QTextCursor(cursor)
cursor_temp.clearSelection()
cursor_temp.insertText(self.get_line_separator())
break
cursor.movePosition(QTextCursor.NextBlock, QTextCursor.KeepAnchor)
text = cursor.selectedText()
cursor.clearSelection()
if not after_current_line:
# Moving cursor before current line/selected text
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
start_pos += len(text)
end_pos += len(text)
cursor.insertText(text)
cursor.endEditBlock()
self.setTextCursor(cursor)
self.__restore_selection(start_pos, end_pos)
class TextDecoration(QTextEdit.ExtraSelection):
"""
Helper class to quickly create a text decoration.
The text decoration is an utility class that adds a few utility methods to
QTextEdit.ExtraSelection.
In addition to the helper methods, a tooltip can be added to a decoration.
(useful for errors markers and so on...)
Text decoration expose a **clicked** signal stored in a separate QObject:
:attr:`pyqode.core.api.TextDecoration.Signals`
.. code-block:: python
deco = TextDecoration()
deco.signals.clicked.connect(a_slot)
def a_slot(decoration):
print(decoration) # spyder: test-skip
"""
class Signals(QObject):
"""
Holds the signals for a TextDecoration (since we cannot make it a
QObject, we need to store its signals in an external QObject).
"""
#: Signal emitted when a TextDecoration has been clicked.
clicked = Signal(object)
def __init__(self, cursor_or_bloc_or_doc, start_pos=None, end_pos=None,
start_line=None, end_line=None, draw_order=0, tooltip=None,
full_width=False):
"""
Creates a text decoration.
.. note:: start_pos/end_pos and start_line/end_line pairs let you
easily specify the selected text. You should use one pair or the
other or they will conflict between each others. If you don't
specify any values, the selection will be based on the cursor.
:param cursor_or_bloc_or_doc: Reference to a valid
QTextCursor/QTextBlock/QTextDocument
:param start_pos: Selection start position
:param end_pos: Selection end position
:param start_line: Selection start line.
:param end_line: Selection end line.
:param draw_order: The draw order of the selection, highest values will
appear on top of the lowest values.
:param tooltip: An optional tooltips that will be automatically shown
when the mouse cursor hover the decoration.
:param full_width: True to select the full line width.
.. note:: Use the cursor selection if startPos and endPos are none.
"""
super(TextDecoration, self).__init__()
self.signals = self.Signals()
self.draw_order = draw_order
self.tooltip = tooltip
self.cursor = QTextCursor(cursor_or_bloc_or_doc)
if full_width:
self.set_full_width(full_width)
if start_pos is not None:
self.cursor.setPosition(start_pos)
if end_pos is not None:
self.cursor.setPosition(end_pos, QTextCursor.KeepAnchor)
if start_line is not None:
self.cursor.movePosition(self.cursor.Start, self.cursor.MoveAnchor)
self.cursor.movePosition(self.cursor.Down, self.cursor.MoveAnchor,
start_line)
if end_line is not None:
self.cursor.movePosition(self.cursor.Down, self.cursor.KeepAnchor,
end_line - start_line)
def contains_cursor(self, cursor):
"""
Checks if the textCursor is in the decoration.
:param cursor: The text cursor to test
:type cursor: QtGui.QTextCursor
:returns: True if the cursor is over the selection
"""
start = self.cursor.selectionStart()
end = self.cursor.selectionEnd()
if cursor.atBlockEnd():
end -= 1
return start <= cursor.position() <= end
def set_as_bold(self):
"""Uses bold text."""
self.format.setFontWeight(QFont.Bold)
def set_foreground(self, color):
"""Sets the foreground color.
:param color: Color
:type color: QtGui.QColor
"""
self.format.setForeground(color)
def set_background(self, brush):
"""
Sets the background brush.
:param brush: Brush
:type brush: QtGui.QBrush
"""
self.format.setBackground(brush)
def set_outline(self, color):
"""
Uses an outline rectangle.
:param color: Color of the outline rect
:type color: QtGui.QColor
"""
self.format.setProperty(QTextFormat.OutlinePen,
QPen(color))
def select_line(self):
"""
Select the entire line but starts at the first non whitespace character
and stops at the non-whitespace character.
:return:
"""
self.cursor.movePosition(self.cursor.StartOfBlock)
text = self.cursor.block().text()
lindent = len(text) - len(text.lstrip())
self.cursor.setPosition(self.cursor.block().position() + lindent)
self.cursor.movePosition(self.cursor.EndOfBlock,
self.cursor.KeepAnchor)
def set_full_width(self, flag=True, clear=True):
"""
Enables FullWidthSelection (the selection does not stops at after the
character instead it goes up to the right side of the widget).
:param flag: True to use full width selection.
:type flag: bool
:param clear: True to clear any previous selection. Default is True.
:type clear: bool
"""
if clear:
self.cursor.clearSelection()
self.format.setProperty(QTextFormat.FullWidthSelection, flag)
def set_as_underlined(self, color=Qt.blue):
"""
Underlines the text.
:param color: underline color.
"""
self.format.setUnderlineStyle(
QTextCharFormat.SingleUnderline)
self.format.setUnderlineColor(color)
def set_as_spell_check(self, color=Qt.blue):
"""
Underlines text as a spellcheck error.
:param color: Underline color
:type color: QtGui.QColor
"""
self.format.setUnderlineStyle(
QTextCharFormat.SpellCheckUnderline)
self.format.setUnderlineColor(color)
def set_as_error(self, color=Qt.red):
"""
Highlights text as a syntax error.
:param color: Underline color
:type color: QtGui.QColor
"""
self.format.setUnderlineStyle(
QTextCharFormat.WaveUnderline)
self.format.setUnderlineColor(color)
def set_as_warning(self, color=QColor("orange")):
"""
Highlights text as a syntax warning.
:param color: Underline color
:type color: QtGui.QColor
"""
self.format.setUnderlineStyle(
QTextCharFormat.WaveUnderline)
self.format.setUnderlineColor(color)
class TextDecoration(QTextEdit.ExtraSelection):
"""
Helper class to quickly create a text decoration.
The text decoration is an utility class that adds a few utility methods to
QTextEdit.ExtraSelection.
In addition to the helper methods, a tooltip can be added to a decoration.
(useful for errors markers and so on...)
Text decoration expose a **clicked** signal stored in a separate QObject:
:attr:`pyqode.core.api.TextDecoration.Signals`
.. code-block:: python
deco = TextDecoration()
deco.signals.clicked.connect(a_slot)
def a_slot(decoration):
print(decoration) # spyder: test-skip
"""
class Signals(QObject):
"""
Holds the signals for a TextDecoration (since we cannot make it a
QObject, we need to store its signals in an external QObject).
"""
#: Signal emitted when a TextDecoration has been clicked.
clicked = Signal(object)
def __init__(self,
cursor_or_bloc_or_doc,
start_pos=None,
end_pos=None,
start_line=None,
end_line=None,
draw_order=0,
tooltip=None,
full_width=False,
font=None,
kind=None):
"""
Creates a text decoration.
.. note:: start_pos/end_pos and start_line/end_line pairs let you
easily specify the selected text. You should use one pair or the
other or they will conflict between each others. If you don't
specify any values, the selection will be based on the cursor.
:param cursor_or_bloc_or_doc: Reference to a valid
QTextCursor/QTextBlock/QTextDocument
:param start_pos: Selection start position
:param end_pos: Selection end position
:param start_line: Selection start line.
:param end_line: Selection end line.
:param draw_order: The draw order of the selection, highest values will
appear on top of the lowest values.
:param tooltip: An optional tooltips that will be automatically shown
when the mouse cursor hover the decoration.
:param full_width: True to select the full line width.
:param font: Decoration font.
:param kind: Decoration kind, e.g. 'current_cell'.
.. note:: Use the cursor selection if startPos and endPos are none.
"""
super(TextDecoration, self).__init__()
self.signals = self.Signals()
self.draw_order = draw_order
self.tooltip = tooltip
self.cursor = QTextCursor(cursor_or_bloc_or_doc)
self.kind = kind
if full_width:
self.set_full_width(full_width)
if start_pos is not None:
self.cursor.setPosition(start_pos)
if end_pos is not None:
self.cursor.setPosition(end_pos, QTextCursor.KeepAnchor)
if start_line is not None:
self.cursor.movePosition(self.cursor.Start, self.cursor.MoveAnchor)
self.cursor.movePosition(self.cursor.Down, self.cursor.MoveAnchor,
start_line)
if end_line is not None:
self.cursor.movePosition(self.cursor.Down, self.cursor.KeepAnchor,
end_line - start_line)
if font is not None:
self.format.setFont(font)
def contains_cursor(self, cursor):
"""
Checks if the textCursor is in the decoration.
:param cursor: The text cursor to test
:type cursor: QtGui.QTextCursor
:returns: True if the cursor is over the selection
"""
start = self.cursor.selectionStart()
end = self.cursor.selectionEnd()
if cursor.atBlockEnd():
end -= 1
return start <= cursor.position() <= end
def set_as_bold(self):
"""Uses bold text."""
self.format.setFontWeight(QFont.Bold)
def set_foreground(self, color):
"""Sets the foreground color.
:param color: Color
:type color: QtGui.QColor
"""
self.format.setForeground(color)
def set_background(self, brush):
"""
Sets the background brush.
:param brush: Brush
:type brush: QtGui.QBrush
"""
self.format.setBackground(brush)
def set_outline(self, color):
"""
Uses an outline rectangle.
:param color: Color of the outline rect
:type color: QtGui.QColor
"""
self.format.setProperty(QTextFormat.OutlinePen, QPen(color))
def select_line(self):
"""
Select the entire line but starts at the first non whitespace character
and stops at the non-whitespace character.
:return:
"""
self.cursor.movePosition(self.cursor.StartOfBlock)
text = self.cursor.block().text()
lindent = len(text) - len(text.lstrip())
self.cursor.setPosition(self.cursor.block().position() + lindent)
self.cursor.movePosition(self.cursor.EndOfBlock,
self.cursor.KeepAnchor)
def set_full_width(self, flag=True, clear=True):
"""
Enables FullWidthSelection (the selection does not stops at after the
character instead it goes up to the right side of the widget).
:param flag: True to use full width selection.
:type flag: bool
:param clear: True to clear any previous selection. Default is True.
:type clear: bool
"""
if clear:
self.cursor.clearSelection()
self.format.setProperty(QTextFormat.FullWidthSelection, flag)
def set_as_underlined(self, color=Qt.blue):
"""
Underlines the text.
:param color: underline color.
"""
self.format.setUnderlineStyle(QTextCharFormat.SingleUnderline)
self.format.setUnderlineColor(color)
def set_as_spell_check(self, color=Qt.blue):
"""
Underlines text as a spellcheck error.
:param color: Underline color
:type color: QtGui.QColor
"""
self.format.setUnderlineStyle(QTextCharFormat.SpellCheckUnderline)
self.format.setUnderlineColor(color)
def set_as_error(self, color=Qt.red):
"""
Highlights text as a syntax error.
:param color: Underline color
:type color: QtGui.QColor
"""
self.format.setUnderlineStyle(QTextCharFormat.WaveUnderline)
self.format.setUnderlineColor(color)
def set_as_warning(self, color=QColor("orange")):
"""
Highlights text as a syntax warning.
:param color: Underline color
:type color: QtGui.QColor
"""
self.format.setUnderlineStyle(QTextCharFormat.WaveUnderline)
self.format.setUnderlineColor(color)
