class ConfigDialog(QDialog):
"""Spyder configuration ('Preferences') dialog box"""
# Signals
check_settings = Signal()
size_change = Signal(QSize)
def __init__(self, parent=None):
QDialog.__init__(self, parent)
self.main = parent
# Widgets
self.pages_widget = QStackedWidget()
self.pages_widget.setMinimumWidth(600)
self.contents_widget = QListWidget()
self.button_reset = QPushButton(_('Reset to defaults'))
bbox = QDialogButtonBox(QDialogButtonBox.Ok | QDialogButtonBox.Apply |
QDialogButtonBox.Cancel)
self.apply_btn = bbox.button(QDialogButtonBox.Apply)
# Widgets setup
# Destroying the C++ object right after closing the dialog box,
# otherwise it may be garbage-collected in another QThread
# (e.g. the editor's analysis thread in Spyder), thus leading to
# a segmentation fault on UNIX or an application crash on Windows
self.setAttribute(Qt.WA_DeleteOnClose)
self.setWindowTitle(_('Preferences'))
self.setWindowIcon(ima.icon('configure'))
self.contents_widget.setMovement(QListView.Static)
self.contents_widget.setSpacing(1)
self.contents_widget.setCurrentRow(0)
self.contents_widget.setMinimumWidth(220)
self.contents_widget.setMinimumHeight(400)
# Layout
hsplitter = QSplitter()
hsplitter.addWidget(self.contents_widget)
hsplitter.addWidget(self.pages_widget)
hsplitter.setStretchFactor(0, 1)
hsplitter.setStretchFactor(1, 2)
btnlayout = QHBoxLayout()
btnlayout.addWidget(self.button_reset)
btnlayout.addStretch(1)
btnlayout.addWidget(bbox)
vlayout = QVBoxLayout()
vlayout.addWidget(hsplitter)
vlayout.addLayout(btnlayout)
self.setLayout(vlayout)
# Signals and slots
if self.main:
self.button_reset.clicked.connect(self.main.reset_spyder)
self.pages_widget.currentChanged.connect(self.current_page_changed)
self.contents_widget.currentRowChanged.connect(
self.pages_widget.setCurrentIndex)
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
bbox.clicked.connect(self.button_clicked)
# Ensures that the config is present on spyder first run
CONF.set('main', 'interface_language', load_lang_conf())
def get_current_index(self):
"""Return current page index"""
return self.contents_widget.currentRow()
def set_current_index(self, index):
"""Set current page index"""
self.contents_widget.setCurrentRow(index)
def get_page(self, index=None):
"""Return page widget"""
if index is None:
widget = self.pages_widget.currentWidget()
else:
widget = self.pages_widget.widget(index)
return widget.widget()
@Slot()
def accept(self):
"""Reimplement Qt method"""
for index in range(self.pages_widget.count()):
configpage = self.get_page(index)
if not configpage.is_valid():
return
configpage.apply_changes()
QDialog.accept(self)
def button_clicked(self, button):
if button is self.apply_btn:
# Apply button was clicked
configpage = self.get_page()
if not configpage.is_valid():
return
configpage.apply_changes()
def current_page_changed(self, index):
widget = self.get_page(index)
self.apply_btn.setVisible(widget.apply_callback is not None)
self.apply_btn.setEnabled(widget.is_modified)
def add_page(self, widget):
self.check_settings.connect(widget.check_settings)
widget.show_this_page.connect(lambda row=self.contents_widget.count():
self.contents_widget.setCurrentRow(row))
widget.apply_button_enabled.connect(self.apply_btn.setEnabled)
scrollarea = QScrollArea(self)
scrollarea.setWidgetResizable(True)
scrollarea.setWidget(widget)
self.pages_widget.addWidget(scrollarea)
item = QListWidgetItem(self.contents_widget)
try:
item.setIcon(widget.get_icon())
except TypeError:
pass
item.setText(widget.get_name())
item.setFlags(Qt.ItemIsSelectable|Qt.ItemIsEnabled)
item.setSizeHint(QSize(0, 25))
def check_all_settings(self):
"""This method is called to check all configuration page settings
after configuration dialog has been shown"""
self.check_settings.emit()
def resizeEvent(self, event):
"""
Reimplement Qt method to be able to save the widget's size from the
main application
"""
QDialog.resizeEvent(self, event)
self.size_change.emit(self.size())
class ConfigDialog(QDialog):
"""Spyder configuration ('Preferences') dialog box"""
# Signals
check_settings = Signal()
size_change = Signal(QSize)
def __init__(self, parent=None):
QDialog.__init__(self, parent)
self.main = parent
# Widgets
self.pages_widget = QStackedWidget()
self.pages_widget.setMinimumWidth(600)
self.contents_widget = QListWidget()
self.button_reset = QPushButton(_('Reset to defaults'))
bbox = QDialogButtonBox(QDialogButtonBox.Ok | QDialogButtonBox.Apply
| QDialogButtonBox.Cancel)
self.apply_btn = bbox.button(QDialogButtonBox.Apply)
self.ok_btn = bbox.button(QDialogButtonBox.Ok)
# Widgets setup
# Destroying the C++ object right after closing the dialog box,
# otherwise it may be garbage-collected in another QThread
# (e.g. the editor's analysis thread in Spyder), thus leading to
# a segmentation fault on UNIX or an application crash on Windows
self.setAttribute(Qt.WA_DeleteOnClose)
self.setWindowTitle(_('Preferences'))
self.setWindowIcon(ima.icon('configure'))
self.contents_widget.setMovement(QListView.Static)
self.contents_widget.setSpacing(1)
self.contents_widget.setCurrentRow(0)
self.contents_widget.setMinimumWidth(220)
self.contents_widget.setMinimumHeight(400)
# Layout
hsplitter = QSplitter()
hsplitter.addWidget(self.contents_widget)
hsplitter.addWidget(self.pages_widget)
hsplitter.setStretchFactor(0, 1)
hsplitter.setStretchFactor(1, 2)
btnlayout = QHBoxLayout()
btnlayout.addWidget(self.button_reset)
btnlayout.addStretch(1)
btnlayout.addWidget(bbox)
vlayout = QVBoxLayout()
vlayout.addWidget(hsplitter)
vlayout.addLayout(btnlayout)
self.setLayout(vlayout)
# Signals and slots
if self.main:
self.button_reset.clicked.connect(self.main.reset_spyder)
self.pages_widget.currentChanged.connect(self.current_page_changed)
self.contents_widget.currentRowChanged.connect(
self.pages_widget.setCurrentIndex)
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
bbox.clicked.connect(self.button_clicked)
# Ensures that the config is present on spyder first run
CONF.set('main', 'interface_language', load_lang_conf())
def get_current_index(self):
"""Return current page index"""
return self.contents_widget.currentRow()
def set_current_index(self, index):
"""Set current page index"""
self.contents_widget.setCurrentRow(index)
def get_page(self, index=None):
"""Return page widget"""
if index is None:
widget = self.pages_widget.currentWidget()
else:
widget = self.pages_widget.widget(index)
if widget:
return widget.widget()
def get_index_by_name(self, name):
"""Return page index by CONF_SECTION name."""
for idx in range(self.pages_widget.count()):
widget = self.pages_widget.widget(idx)
widget = widget.widget()
if widget.CONF_SECTION == name:
return idx
else:
return None
@Slot()
def accept(self):
"""Reimplement Qt method"""
for index in range(self.pages_widget.count()):
configpage = self.get_page(index)
if not configpage.is_valid():
return
configpage.apply_changes()
QDialog.accept(self)
def button_clicked(self, button):
if button is self.apply_btn:
# Apply button was clicked
configpage = self.get_page()
if not configpage.is_valid():
return
configpage.apply_changes()
def current_page_changed(self, index):
widget = self.get_page(index)
self.apply_btn.setVisible(widget.apply_callback is not None)
self.apply_btn.setEnabled(widget.is_modified)
def add_page(self, widget):
self.check_settings.connect(widget.check_settings)
widget.show_this_page.connect(lambda row=self.contents_widget.count():
self.contents_widget.setCurrentRow(row))
widget.apply_button_enabled.connect(self.apply_btn.setEnabled)
scrollarea = QScrollArea(self)
scrollarea.setWidgetResizable(True)
scrollarea.setWidget(widget)
self.pages_widget.addWidget(scrollarea)
item = QListWidgetItem(self.contents_widget)
try:
item.setIcon(widget.get_icon())
except TypeError:
pass
item.setText(widget.get_name())
item.setFlags(Qt.ItemIsSelectable | Qt.ItemIsEnabled)
item.setSizeHint(QSize(0, 25))
def check_all_settings(self):
"""This method is called to check all configuration page settings
after configuration dialog has been shown"""
self.check_settings.emit()
def resizeEvent(self, event):
"""
Reimplement Qt method to be able to save the widget's size from the
main application
"""
QDialog.resizeEvent(self, event)
self.size_change.emit(self.size())
class ConfigDialog(QDialog):
"""Configuration or preferences dialog box"""
# Signals
check_settings = Signal()
size_change = Signal(QSize)
def __init__(self, parent=None, objname=None):
QDialog.__init__(self, parent)
# If used for data object in tree, the main is the tree widget.
self.parent = parent
self.objname = objname
# Widgets
self.pages_widget = QStackedWidget()
self.contents_widget = QListWidget()
self.button_reset = QPushButton(_('Reset to defaults'))
bbox = QDialogButtonBox(QDialogButtonBox.Ok | QDialogButtonBox.Apply |
QDialogButtonBox.Cancel)
self.apply_btn = bbox.button(QDialogButtonBox.Apply)
# Widgets setup
# Destroying the C++ object right after closing the dialog box,
# otherwise it may be garbage-collected in another QThread
# (e.g. the editor's analysis thread in Ezcad), thus leading to
# a segmentation fault on UNIX or an application crash on Windows
self.setAttribute(Qt.WA_DeleteOnClose)
if self.objname is None:
self.setWindowTitle(_('Preferences'))
else:
self.setWindowTitle(_('Preferences of ') + self.objname)
self.setWindowIcon(ima.icon('configure'))
self.contents_widget.setMovement(QListView.Static)
self.contents_widget.setSpacing(1)
self.contents_widget.setCurrentRow(0)
# Layout
hsplitter = QSplitter()
hsplitter.addWidget(self.contents_widget)
hsplitter.addWidget(self.pages_widget)
hsplitter.setSizes([150,500])
btnlayout = QHBoxLayout()
btnlayout.addWidget(self.button_reset)
btnlayout.addStretch(1)
btnlayout.addWidget(bbox)
vlayout = QVBoxLayout()
vlayout.addWidget(hsplitter)
vlayout.addLayout(btnlayout)
self.setLayout(vlayout)
# Signals and slots
self.pages_widget.currentChanged.connect(self.current_page_changed)
self.contents_widget.currentRowChanged.connect(
self.pages_widget.setCurrentIndex)
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
bbox.clicked.connect(self.button_clicked)
# Ensures that the config is present on ezcad first run
CONF.set('main', 'interface_language', load_lang_conf())
def get_current_index(self):
"""Return current page index"""
return self.contents_widget.currentRow()
def set_current_index(self, index):
"""Set current page index"""
self.contents_widget.setCurrentRow(index)
def get_page(self, index=None):
"""Return page widget"""
if index is None:
widget = self.pages_widget.currentWidget()
else:
widget = self.pages_widget.widget(index)
return widget.widget()
@Slot()
def accept(self):
"""Reimplement Qt method"""
for index in range(self.pages_widget.count()):
configpage = self.get_page(index)
configpage.apply_changes()
QDialog.accept(self)
def button_clicked(self, button):
if button is self.apply_btn:
# Apply button was clicked
configpage = self.get_page()
configpage.apply_changes()
def current_page_changed(self, index):
# widget = self.get_page(index)
self.apply_btn.setVisible(True)
self.apply_btn.setEnabled(True)
def add_page(self, widget):
scrollarea = QScrollArea(self)
scrollarea.setWidgetResizable(True)
scrollarea.setWidget(widget)
self.pages_widget.addWidget(scrollarea)
item = QListWidgetItem(self.contents_widget)
try:
item.setIcon(widget.get_icon())
except TypeError:
pass
item.setText(widget.get_name())
item.setFlags(Qt.ItemIsSelectable|Qt.ItemIsEnabled)
item.setSizeHint(QSize(0, 25))
def check_all_settings(self):
"""This method is called to check all configuration page settings
after configuration dialog has been shown"""
self.check_settings.emit()
def resizeEvent(self, event):
"""
Reimplement Qt method to be able to save the widget's size from the
main application
"""
QDialog.resizeEvent(self, event)
self.size_change.emit(self.size())
