def server_test(debug_model: bool):
server = RDTSocket(debug=debug_model)
server.bind((SERVER_ADDR, SERVER_PORT))
try:
while True:
conn, client_addr = server.accept()
Echo(conn, client_addr).start()
except KeyboardInterrupt as k:
print(k)
def client_test(file_path, debug):
client = RDTSocket(debug=debug)
if client.connect((SERVER_ADDR, SERVER_PORT)):
data_count = 0
count = 20
f = open(file_path, 'rb')
data_send = f.read()
start = time.perf_counter()
for i in range(count): # send data for count times
data_count += len(data_send)
client.send(data_send)
data_send = data_send * count
mid = time.perf_counter()
print('---------------------------------------------')
print(
f'client send OK, data size: {unit_convert(len(data_send))}, send time cost: {mid - start} s'
)
print('---------------------------------------------')
echo = bytearray()
while True:
reply = client.recv(2048)
echo.extend(reply)
assert echo == data_send[:len(echo)], 'Inconsistent echo content'
if len(echo) == len(data_send):
break
end = time.perf_counter()
print('=============================================')
print(
f'client recv OK, data size: {unit_convert(len(echo))} bytes, recv time cost: {end - mid} s'
)
print(f'Total time cost: {end - start}')
print('=============================================')
client.close()
print('client main thread stop.')
from rdt import RDTSocket
from socket import socket, AF_INET, SOCK_DGRAM, SOCK_STREAM
import time
if __name__ == '__main__':
server = RDTSocket()
# server = socket(AF_INET, SOCK_STREAM) # check what python socket does
server.bind(('127.0.0.1', 9999))
# server.listen(0) # check what python socket does
while True:
print(type(server))
conn, client_addr = server.accept()
start = time.perf_counter()
while True:
data = conn.recv(4096)
print(data)
if data:
conn.send(data)
else:
break
'''
make sure the following is reachable
'''
conn.close()
print(f'connection finished in {time.perf_counter()-start}s')
import time
from difflib import Differ
from rdt import RDTSocket
if __name__ == '__main__':
client = RDTSocket()
# client = socket(AF_INET, SOCK_STREAM) # check what python socket does
client.connect(('127.0.0.1', 9999))
echo = b''
count = 1
slice_size = 2048
blocking_send = False
with open('alice.txt', 'r') as f:
data = f.read()
encoded = data.encode()
assert len(data) == len(encoded)
'''
check if your rdt pass either of the two
mode A may be significantly slower when slice size is small
'''
if blocking_send:
print('transmit in mode A, send & recv in slices')
slices = [
encoded[i * slice_size:i * slice_size + slice_size]
for i in range(len(encoded) // slice_size + 1)
]
assert sum([len(slice) for slice in slices]) == len(encoded)
from Cons import *
from rdt import RDTSocket
import time
from difflib import Differ
client = RDTSocket(debug=DEBUG, rate=RATE)
client.bind(('127.0.0.1', 9998))
client.connect(('127.0.0.1', 9999))
data_count = 0
echo = b''
count = CNT
with open(FILE, 'rb') as f:
data = f.read()
encoded = data
assert len(data) == len(encoded)
start = time.perf_counter()
for i in range(count): # send 'alice.txt' for count times
data_count += len(data)
client.send(encoded)
'''
blocking send works but takes more time
'''
while True:
reply = client.recv(2048)
echo += reply
print(reply)
if len(echo) == len(encoded) * count:
from rdt import RDTSocket
import time
from difflib import Differ
from Cons import RATE, FILE, CNT
client = RDTSocket(rate=RATE)
client.connect(('127.0.0.1', 2777))
data_count = 0
echo = b''
count = CNT
with open(FILE, 'r') as f:
data = f.read()
encoded = data.encode()
assert len(data) == len(encoded)
start = time.perf_counter()
for i in range(count): # send 'alice.txt' for count times
data_count += len(data)
client.send(encoded)
'''
blocking send works but takes more time
'''
while True:
reply = client.recv(2048)
echo += reply
print(reply)
if len(echo) == len(encoded) * count:
break
from rdt import RDTSocket
if __name__ == '__main__':
client_address = ('127.0.0.1', 44444)
client = RDTSocket(rate=None)
client.bind(client_address)
from rdt import RDTSocket
import time
from Cons import RATE
if __name__ == '__main__':
server = RDTSocket(rate=RATE)
server.bind(('127.0.0.1', 2777))
while True:
conn, client_addr = server.accept()
start = time.perf_counter()
while True:
data = conn.recv(2048)
if data:
conn.send(data)
else:
break
'''
make sure the following is reachable
'''
conn.close()
print(f'connection finished in {time.perf_counter()-start}s')
from rdt import RDTSocket
if __name__ == '__main__':
server_address = ('127.0.0.1', 33333)
server = RDTSocket(rate=None)
server.bind(server_address)
while True:
conn, client = server.accept()
from rdt import RDTSocket
if __name__ == '__main__':
server_address = ('127.0.0.1', 33333)
client = RDTSocket(rate=None)
client.connect(server_address)
from rdt import RDTSocket
if __name__ == '__main__':
server_address = ('127.0.0.1', '33333')
server = RDTSocket(rate=None)
server.bind(server_address)
from rdt import RDTSocket
from threading import *
import time
client_addr = ("127.0.0.1", 9091)
client = RDTSocket()
if __name__ == '__main__':
client.bind(client_addr)
client.connect(("127.0.0.1", 9090))
# while True:
# data = input(">")
# client.send(data.encode())
#
# if data == 'exit':
# break
while True:
data = client.recv(1024)
print("-----------------------")
print("Client Receive: ", data)
print("-----------------------")
if data == b'exit':
break
# start = time.time()
# data = open("src/补充说明.pdf", 'rb').read()
# client.send(data)
# print(time.time() - start)
from rdt import RDTSocket
if __name__ == "__main__":
try:
server = RDTSocket()
server.bind(("127.0.0.1", 1234))
# 这个叫 server 的 socket 只用来监听连接请求，有一个 client 想连接，server 就给这个 clinet 分配一个专属的 conn，在 conn 上收发数据
while True:
conn, addr = server.accept()
while True:
data = conn.recv(1024000)
if data:
print("received payload: " + data.decode())
if data == b"exit":
break
elif data == b"quit":
print("Server Closed")
exit()
else:
break
conn.close()
print("Server Connection Lost")
except KeyboardInterrupt:
exit()
from rdt import RDTSocket
from socket import socket, AF_INET, SOCK_STREAM
import time
from difflib import Differ
if __name__=='__main__':
# client = RDTSocket()
client = RDTSocket() # check what python socket does
client.connect(('127.0.0.1', 9999))
echo = b''
count = 5
slice_size = 2048
blocking_send = True
with open('alice.txt', 'r') as f:
data = f.read()
encoded = data.encode()
assert len(data)==len(encoded)
'''
check if your rdt pass either of the two
mode A may be significantly slower when slice size is small
'''
if blocking_send:
print('transmit in mode A, send & recv in slices')
slices = [encoded[i*slice_size:i*slice_size+slice_size] for i in range(len(encoded)//slice_size+1)]
assert sum([len(slice) for slice in slices])==len(encoded)
start = time.perf_counter()
for i in range(count): # send 'alice.txt' for count times
from Cons import RATE, DEBUG
from rdt import RDTSocket
import time
if __name__ == '__main__':
server = RDTSocket(debug=DEBUG, rate=RATE)
server.bind(('127.0.0.1', 9999))
while True:
conn, client_addr = server.accept()
start = time.perf_counter()
while True:
data = conn.recv(2048)
if data:
conn.send(data)
else:
break
'''
make sure the following is reachable
'''
conn.close()
print(f'connection finished in {time.perf_counter()-start}s')
import network
from rdt import RDTSocket
import _thread
if __name__ == '__main__':
# sock_snd = RDTSocket()
# sock_snd.bind(('127.0.0.1', 5555))
#
# sock_rcv = RDTSocket()
# sock_rcv.bind(('127.0.0.1',5550))
# sock_snd.sendto(b'connecting',('127.0.0.1',5550))
# for i in range(10):
# sock_snd.send(b'hello')
# print(sock_rcv.recvfrom(2048))
rdt = RDTSocket()
try:
_thread.start_new_thread(rdt.send, (b'hello', ))
_thread.start_new_thread(rdt.recv, (2048, ))
except:
print("Error: unable to start thread")
pass
from rdt import RDTSocket
if __name__ == "__main__":
try:
client = RDTSocket()
client.connect(("127.0.0.1", 1234))
while True:
print("input data:")
data = input()
if data == "alice":
data = open("alice.txt", "r").read()
client.send(data.encode())
if data == "exit" or data == "quit":
break
client.close()
print("Client Closed")
except KeyboardInterrupt:
exit()
from rdt import RDTSocket
server_addr = ("127.0.0.1", 9090)
server = RDTSocket()
if __name__ == '__main__':
server.bind(server_addr)
conn, addr = server.accept()
# while True:
# data = conn.recv(1024)
# print("-----------------------")
# print("Server Receive: ", data)
# print("-----------------------")
#
# if data == b'exit':
# break
while True:
data = input(">")
conn.send(data.encode())
if data == 'exit':
break
# with open("dst/补充说明1.pdf", mode='wb') as file:
# data = conn.recv(1024000000)
# print("-----------------------")
# print("Server Receive!")
# print("-----------------------")
