def fishtank():
logger = log.RotatingFile("/var/log/picontroller/logs")
sensorAir = temp_sensor.TempSensor.new(name="Room",sensor="/sys/bus/w1/devices/28-0014117fb1ff/w1_slave")
sensorTank = temp_sensor.TempSensor.new(name="Tank", sensor="/sys/bus/w1/devices/28-00000676eb5f/w1_slave")
pinList = [11, 13, 15, 16]
r0 = relay.Relay(pin=pinList[0],name="Relay1")
r1 = relay.Relay(pin=pinList[1],name="Relay2")
r0.init()
r1.init()
t0 = timer.Timer('Light1')
t0.set(timer.S3,timer.S3,timer.S3,timer.S3,timer.S3,timer.S5,timer.S5)
t1 = timer.Timer('Light2')
t1.set(timer.S4,timer.S4,timer.S4,timer.S4,timer.S4,timer.S6,timer.S6)
webserver.temps.append(sensorAir)
webserver.temps.append(sensorTank)
webserver.relays.append(r0)
webserver.relays.append(r1)
webserver.timers.append(t0)
webserver.timers.append(t1)
webserver.start_server()
now = 0
while True:
while time.time() < now:
time.sleep(1)
now = time.time()+60
sensorAir.tick()
sensorTank.tick()
if t0.on():
r0.turn_relay_on()
else:
r0.turn_relay_off()
if t1.on():
r1.turn_relay_on()
else:
r1.turn_relay_off()
timestamp = datetime.datetime.utcnow().isoformat('T')+"000Z"
l = "time:{t}\troom:{r}\ttank:{w}\tlight0:{r0}\tline1:{r1}".format(t=timestamp,
r=sensorAir.current_value,
w=sensorTank.current_value,
r0=r0.current_state,
r1=r1.current_state)
logger.log(l)
def __init__(self, run, logger):
self._run = run
self.probe = temperature_probe.Probe()
self.relay = relay.Relay()
self.int_error = 0
self.logger = logger
self.is_active = True
def wait(self):
print "myNode : " + self.net.myNode
print "Launching server... press Ctrl-C to quit relay mode"
try:
self.csock, self.addr = self.sock.accept()
except KeyboardInterrupt:
self.sock.close()
return False
data = ""
while True:
try:
tmp = self.csock.recv(1024)
except:
break
if not tmp:
break
data += tmp
if self.net.debug:
print "received %d bytes data: " % (len(data)) + repr(data)
rel = relay.Relay(self.net)
rel.parse(data)
rel.relay()
return True
def Regulator(reg_type):
return_value = None
if reg_type == 'repeater':
return_value = repeater.Repeater()
elif reg_type == 'relay':
return_value = relay.Relay()
else:
print('type of regulator is underfined')
return return_value
def main():
if len(sys.argv) > 1:
state = sys.argv[1]
if state not in ('on', 'off'):
state = None
else:
state = None
if not state:
usage()
return
initial_state = (state == 'on')
a_relay = relay.Relay(initial_state=initial_state)
def fermenter():
logger = log.RotatingFile("/var/log/picontroller/logs")
sensorAir = temp_sensor.TempSensor.new(name='temp', sensor='/sys/bus/w1/devices/28-041501b016ff/w1_slave')
pinList = [33,35,37]
r0 = relay.Relay(pinList[0])
r0.init()
webserver.temps.append(sensorAir)
webserver.relays.append(r0)
webserver.start_server()
now = 0
while True:
while time.time() < now:
time.sleep(1)
now = time.time()+60
sensorAir.tick()
if sensorAir.current_value < 21.75:
if relay_state == 0:
relay_state = 1
r0.turn_relay_on()
if sensorAir.current_value > 22.00 or last_temp < sensorAir.current_value:
relay_state = 0
r0.turn_relay_off()
last_temp = sensorAir.current_value
timestamp = datetime.datetime.utcnow().isoformat('T')+"000Z"
l = "time:{t}\ttemp:{r}\trelay:{r0}".format(t=timestamp, r=sensorAir.current_value,
r0=r0.current_state)
logger.log(l)
#!/usr/bin/env python
# coding:utf-8
import RPi.GPIO as GPIO
from time import sleep
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)
touch_pin = 22
water_relay_pin = 5
GPIO.setup(touch_pin, GPIO.OUT)
GPIO.output(touch_pin, GPIO.LOW)
GPIO.setup(touch_pin, GPIO.IN, GPIO.PUD_UP)
import relay
rp = relay.Relay(water_relay_pin)
while 1:
try:
if GPIO.wait_for_edge(touch_pin, GPIO.RISING):
rp.twinkle(0.2, 0.5, 5)
except KeyboardInterrupt:
break
print "%s Failed to load Module: %s" % (__file__, err)
sys.exit(1)
#logging.basicConfig(level=logging.DEBUG, format='%(asctime)s - %(levelname)s - %(message)s')
logging.basicConfig(level=logging.CRITICAL)
param = settings.settings()
RotQueue = Queue() # define global que for events
if param.RPI_Version is not None:
import RotaryEncoder
encoder = RotaryEncoder.RotaryEncoderWorker(param.A_PIN, param.B_PIN,
param.SW_PIN, RotQueue)
import relay
Relay = relay.Relay(param.R_PIN)
import atexit
@atexit.register
def close_gpio(): # close the gpio port at exit time
encoder.Exit()
def check_process(procname):
if psutil.version_info[0] < 4:
return procname in [p.name for p in psutil.process_iter()]
else:
return procname in [p.name() for p in psutil.process_iter()]
class Matter(object):
import relay as r
import motion_sensor as ms
import light_sensor as ls
# Set the different inputs/outputs for the Raspberry Pi modules and sensors.
pin_motion_sensor_in = 11
pin_light_sensor_in = 12
pin_relay_out = 7
# Set the correct RPi.GPIO mode.
GPIO.setmode(GPIO.BOARD)
# Initialize the different classes.
motionSensor = ms.MotionSensor(pin_motion_sensor_in)
lightSensor = ls.LightSensor(pin_light_sensor_in)
relay = r.Relay(pin_relay_out)
while 1:
if ((relay.lastTimeTurnedOn is not None) and
((relay.lastTimeTurnedOn + timedelta(seconds=5) > datetime.now()))):
if (motionSensor.motionDetected):
print("Het licht blijft aan, en er is beweging gedetecteerd")
relay.lastTimeTurnedOn = datetime.now()
relay.turn_on()
else:
print("Het licht blijft aan")
relay.turn_on()
else:
if (motionSensor.motionDetected):
needsLight = lightSensor.is_dark_environment()
if (needsLight == True):
def main():
try:
wifiInf = raw_input("Enter Wifi interface: ").strip()
except:
sys.exit(2)
# init for net
net = OSNetwork(wifiInf)
net.macaddr = ''.join(
__import__('netifaces').ifaddresses(wifiInf)[17][0]
['addr'].upper().split(':'))
net.prefix = prefix
net.myNode = net.prefix + "_" + net.macaddr
net.default_host = default_host
net.default_client = default_client
net.default_port = default_port
if len(sys.argv) > 1 and sys.argv[1] == 'debug':
net.debug = True
server_flag = True
command = ""
while command != "exit":
if server_flag:
net.set_Adhoc(prefix + "_" + net.macaddr)
with Server(net, '0.0.0.0', default_port) as serv:
if serv.wait():
continue
server_flag = False
try:
command = raw_input("input command(scan, send, relay, exit): ")
except:
break
if command == "scan":
aps = net.get_APs()
import parser
for ap in aps:
if parser.get_prefix(ap) and parser.get_prefix(ap) == prefix:
print "SSID: " + ap
continue
if command == "send":
dist = raw_input("input target SSID: ").strip()
msg = raw_input("input message: ").strip()
import relay
rel = relay.Relay(net)
rel.send(dist, msg)
continue
if command == "relay":
server_flag = True
continue
if command != "exit":
print "unknown command: " + command
print "Bye!"
def __init__(self):
for pin in self.pinAssignment:
self.relays.append(relay.Relay(pin))
def garage():
logger = log.RotatingFile("/var/log/picontroller/logs")
sensorAir = temp_sensor.TempSensor.new(name='AirTemp', sensor="/sys/bus/w1/devices/28-041501b3a6ff/w1_slave")
sensorTank = temp_sensor.TempSensor.new(name='TankTemp', sensor="/sys/bus/w1/devices/28-041501ad96ff/w1_slave")
sensorDist = dist_sensor.DistSensor.new(sensorTank, echo_pin=13,trig_pin=11, tank_depth=82, name="WaterLevel")
pinList = [31,33,35,37]
r_airpump = relay.Relay(pin=pinList[0],name='Airpump')
r_heater2 = relay.Relay(pin=pinList[1],name='Heater2')
r_heater = relay.Relay(pin=pinList[2],name='Heater')
r_valve = relay.Relay(pin=pinList[3],name='Valve')
r_Active = relay.VirtualRelay(name='Active')
r_heater.init()
r_airpump.init()
r_heater2.init()
r_valve.init()
r_Active.init()
t_airpump = timer.Timer("Airpump")
t_airpump.set(timer.S10,timer.S10,timer.S10,timer.S10,timer.S10,timer.S10,timer.S10)
webserver.temps.append(sensorAir)
webserver.temps.append(sensorTank)
webserver.dists.append(sensorDist)
webserver.relays.append(r_heater)
webserver.relays.append(r_airpump)
webserver.relays.append(r_heater2)
webserver.relays.append(r_valve)
webserver.relays.append(r_Active)
webserver.timers.append(t_airpump)
webserver.start_server()
now = 0
while True:
while time.time() < now:
time.sleep(1)
now = time.time()+60
sensorAir.tick()
sensorTank.tick()
sensorDist.tick()
# VALVE
if r_Active.current_state == relay.Relay.ON:
if sensorDist.current_value < 55:
r_valve.turn_relay_on()
if sensorDist.current_value > 62:
r_valve.turn_relay_off()
# HEATER
if sensorTank.current_value > 22:
r_heater.turn_relay_off()
if sensorTank.current_value < 21:
r_heater.turn_relay_on()
else:
r_heater.turn_relay_off()
r_valve.turn_relay_off()
# AIRPUMP
if t_airpump.on():
r_airpump.turn_relay_on()
else:
r_airpump.turn_relay_off()
timestamp = datetime.datetime.utcnow().isoformat('T')+"000Z"
l = "time:{t}\tairtemp:{r}\ttanktemp:{w}\twater:{d}\twatervalve:{r0}\tairpump:{r1}\theater1:{r2}\theater2:{r3}\tactive:{a}".\
format(t=timestamp,
r=sensorAir.current_value,
w=sensorTank.current_value,
d=sensorDist.current_value,
r0=r_valve.current_state,
r1=r_airpump.current_state,
r2=r_heater.current_state,
r3=r_heater2.current_state,
a=r_Active.current_state)
logger.log(l)
def shrimp():
logger = log.RotatingFile("/var/log/picontroller/logs")
sensorAir = temp_sensor.TempSensor.new(name='Room', sensor="/sys/bus/w1/devices/28-0315019a7bff/w1_slave")
sensorTank = temp_sensor.TempSensor.new(name='Tank', sensor="/sys/bus/w1/devices/28-041501af2dff/w1_slave")
pinList = [31,33,35,37]
r_heater = relay.Relay(pin=pinList[0],name='Heater')
r_fan = relay.Relay(pin=pinList[1],name='Fan')
r_light = relay.Relay(pin=pinList[2],name='Light')
r_xmas = relay.Relay(pin=pinList[3],name='XMAS')
r_heater.init()
r_fan.init()
r_light.init()
r_xmas.init()
t_lights = timer.Timer("Lights")
t_lights.set(timer.S1,timer.S1,timer.S1,timer.S1,timer.S1,timer.S1,timer.S1)
t_xmas = timer.Timer("XMAS")
t_xmas.set(timer.ST,timer.ST,timer.ST,timer.ST,timer.ST,timer.ST,timer.ST)
webserver.temps.append(sensorAir)
webserver.temps.append(sensorTank)
webserver.relays.append(r_heater)
webserver.relays.append(r_fan)
webserver.relays.append(r_light)
webserver.relays.append(r_xmas)
webserver.timers.append(t_lights)
webserver.timers.append(t_xmas)
webserver.start_server()
now = 0
while True:
while time.time() < now:
time.sleep(1)
now = time.time()+60
sensorAir.tick()
sensorTank.tick()
# FAN
if sensorTank.current_value > 22.8:
r_fan.turn_relay_on()
if sensorTank.current_value < 22.5:
r_fan.turn_relay_off()
# HEATER
if sensorTank.current_value > 22.5:
r_heater.turn_relay_off()
if sensorTank.current_value < 22.3:
r_heater.turn_relay_on()
# LIGHT
if t_lights.on():
r_light.turn_relay_on()
else:
r_light.turn_relay_off()
# XMAS Lights
if t_xmas.on():
r_xmas.turn_relay_on()
else:
r_xmas.turn_relay_off()
timestamp = datetime.datetime.utcnow().isoformat('T')+"000Z"
l = "time:{t}\troom:{r}\ttank:{w}\tlight:{r0}\tfan:{r1}\theater:{r2}\txmas:{r3}".format(t=timestamp,
r=sensorAir.current_value,
w=sensorTank.current_value,
r0=r_light.current_state,
r1=r_fan.current_state,
r2=r_heater.current_state,
r3=r_xmas.current_state)
logger.log(l)