def check_requires(_):
""" Check prerequisites and report if any are missing. """
missing_repos = []
main_repo_missing = False
repos = repository.repositoriesFromDefinition('local', '')
for r in repos:
missing_repos += r.check_requires(installed_repos)
if len(missing_repos) == 0:
return SKIP_SCREEN
text2 = ''
for r in missing_repos:
if r.startswith(constants.MAIN_REPOSITORY_NAME):
main_repo_missing = True
text2 += " * %s\n" % r
if main_repo_missing:
text = "This Supplemental Pack is not compatible with this version of %s." % (version.PRODUCT_BRAND or version.PLATFORM_NAME)
else:
text = "The following dependencies have not yet been installed:\n\n" + text2 + \
"\nPlease install them first and try again."
ButtonChoiceWindow(
tui.screen, "Error",
text,
['Back'])
return LEFT_BACKWARDS
def verify_source(answers, label, require_base_repo):
cap_label = ' '.join(map(lambda a: a.capitalize(), label.split()))
if 'source-media' in answers and 'source-address' in answers:
media = answers['source-media']
address = answers['source-address']
else:
media = 'local'
address = ''
done = False
SKIP, VERIFY = range(2)
entries = [
("Skip verification", SKIP),
("Verify %s source" % label, VERIFY),
]
if media == 'local':
text = "Would you like to test your media?"
default = selectDefault(VERIFY, entries)
else:
text = "Would you like to test your %s repository? This may cause significant network traffic." % label
default = selectDefault(SKIP, entries)
while not done:
(button, entry) = ListboxChoiceWindow(tui.screen,
"Verify %s Source" % cap_label,
text,
entries, ['Ok', 'Back'],
default=default,
help='vfyrepo')
if button == 'back': return LEFT_BACKWARDS
if entry == VERIFY:
# we need to do the verification:
try:
tui.progress.showMessageDialog("Please wait",
"Searching for repository...")
repos = repository.repositoriesFromDefinition(media, address)
tui.progress.clearModelessDialog()
if require_base_repo and constants.MAIN_REPOSITORY_NAME not in [
r.identifier() for r in repos
]:
ButtonChoiceWindow(
tui.screen, "Error",
"""A base installation repository was not found. Please check the address was valid and/or that the media was inserted correctly, and try again.""",
['Ok'])
else:
done = interactive_source_verification(repos, label)
except Exception as e:
xelogging.logException(e)
ButtonChoiceWindow(
tui.screen, "Error",
"""Unable to access location specified. Please check the address was valid and/or that the media was inserted correctly, and try again.""",
['Ok'])
else:
done = True
return RIGHT_FORWARDS
def check_repo_def(definition, require_base_repo):
""" Check that the repository source definition gives access to suitable
repositories. """
try:
tui.progress.showMessageDialog("Please wait", "Searching for repository...")
repos = repository.repositoriesFromDefinition(*definition)
tui.progress.clearModelessDialog()
except Exception, e:
xelogging.log("Exception trying to access repository: %s" % e)
tui.progress.clearModelessDialog()
return REPOCHK_NO_ACCESS
def check_repo_def(definition, require_base_repo):
""" Check that the repository source definition gives access to suitable
repositories. """
try:
tui.progress.showMessageDialog("Please wait",
"Searching for repository...")
repos = repository.repositoriesFromDefinition(*definition)
tui.progress.clearModelessDialog()
except Exception, e:
xelogging.log("Exception trying to access repository: %s" % e)
tui.progress.clearModelessDialog()
return REPOCHK_NO_ACCESS
def verify_source(answers, label, require_base_repo):
cap_label = ' '.join(map(lambda a: a.capitalize(), label.split()))
if 'source-media' in answers and 'source-address' in answers:
media = answers['source-media']
address = answers['source-address']
else:
media = 'local'
address = ''
done = False
SKIP, VERIFY = range(2)
entries = [ ("Skip verification", SKIP),
("Verify %s source" % label, VERIFY), ]
if media == 'local':
text = "Would you like to test your media?"
default = selectDefault(VERIFY, entries)
else:
text = "Would you like to test your %s repository? This may cause significant network traffic." % label
default = selectDefault(SKIP, entries)
while not done:
(button, entry) = ListboxChoiceWindow(
tui.screen, "Verify %s Source" % cap_label, text,
entries, ['Ok', 'Back'], default = default, help = 'vfyrepo')
if button == 'back': return LEFT_BACKWARDS
if entry == VERIFY:
# we need to do the verification:
try:
tui.progress.showMessageDialog("Please wait", "Searching for repository...")
repos = repository.repositoriesFromDefinition(media, address)
tui.progress.clearModelessDialog()
if require_base_repo and constants.MAIN_REPOSITORY_NAME not in [r.identifier() for r in repos]:
ButtonChoiceWindow(
tui.screen, "Error",
"""A base installation repository was not found. Please check the address was valid and/or that the media was inserted correctly, and try again.""",
['Ok'])
else:
done = interactive_source_verification(repos, label)
except:
ButtonChoiceWindow(
tui.screen, "Error",
"""Unable to access location specified. Please check the address was valid and/or that the media was inserted correctly, and try again.""",
['Ok'])
else:
done = True
return RIGHT_FORWARDS
def check_repo_def(definition, require_base_repo):
""" Check that the repository source definition gives access to suitable
repositories. """
try:
tui.progress.showMessageDialog("Please wait", "Searching for repository...")
repos = repository.repositoriesFromDefinition(*definition)
tui.progress.clearModelessDialog()
except Exception as e:
logger.log("Exception trying to access repository: %s" % e)
logger.logException(e)
tui.progress.clearModelessDialog()
return REPOCHK_NO_ACCESS
else:
if len(repos) == 0:
return REPOCHK_NO_REPO
elif constants.MAIN_REPOSITORY_NAME not in [r.identifier() for r in repos] and require_base_repo:
return REPOCHK_NO_BASE_REPO
return REPOCHK_NO_ERRORS
def get_more_media(_):
""" 'Please insert disk' dialog. """
done = False
while not done:
text = ''
for need in still_need:
if text == '':
text = "The following Supplemental Packs must be supplied to complete installation:\n\n"
text += " * %s\n" % need
text += "\nWhen there are no more Supplemental Packs to install press Skip."
more = ButtonChoiceWindow(tui.screen, "New Media", "Please insert your Supplemental Pack now.\n" + text,
['Ok', 'Skip'], 40)
if more == "skip":
# they hit cancel:
confirm = "skip"
if len(still_need) > 0:
# check they mean it
check_text = "The following Supplemental Packs could contain packages which are essential:\n\n"
for need in still_need:
check_text += " * %s\n" % need
check_text += "\nAre you sure you wish to skip installing them?"
confirm = ButtonChoiceWindow(tui.screen, "Essential Packages", check_text,
['Back', 'Skip'])
if confirm == "skip":
rv = EXIT
done = True
else:
# they hit OK - check there is a disc
repos = repository.repositoriesFromDefinition('local', '')
if len(repos) == 0:
ButtonChoiceWindow(
tui.screen, "Error",
"No installation files were found - please check your disc and try again.",
['Back'])
else:
# found repositories - can leave this screen
rv = RIGHT_FORWARDS
done = True
return rv
def go(ui, args, answerfile_address, answerfile_script):
extra_repo_defs = []
results = {
'keymap': None,
'serial-console': None,
'operation': init_constants.OPERATION_INSTALL,
'boot-serial': False,
'extra-repos': [],
'network-backend': constants.NETWORK_BACKEND_DEFAULT,
'root-password': ('pwdhash', '!!'),
'create-new-partitions':
True, # FALSE = DOS | TRUE = GPT set via command line only with --disable-gpt
'new-partition-layout':
False, # TRUE = GPT with LOG,BACKUP,ROOT,BOOT,SWAP,SR automatically set during install/upgrade
'services': {s: None
for s in constants.SERVICES
}, # default state for services, example {'sshd': None}
}
suppress_extra_cd_dialog = False
serial_console = None
boot_console = None
boot_serial = False
if not xen_control_domain() or '--virtual' in args:
hardware.useVMHardwareFunctions()
for (opt, val) in args.items():
if opt == "--boot-console":
# takes precedence over --console
if hardware.is_serialConsole(val):
boot_console = hardware.getSerialConfig()
elif opt == "--console":
for console in val:
if hardware.is_serialConsole(console):
serial_console = hardware.getSerialConfig()
if hardware.is_serialConsole(val[-1]):
boot_serial = True
elif opt == "--keymap":
results["keymap"] = val
logger.log("Keymap specified on command-line: %s" % val)
elif opt == "--extrarepo":
extra_repo_defs += val
elif opt == "--onecd":
suppress_extra_cd_dialog = True
elif opt == "--disable-gpt":
constants.GPT_SUPPORT = False
results["create-new-partitions"] = False
logger.log(
"Forcing DOS partition table and old partition layout via command-line"
)
elif opt == "--legacy-partitions":
results["create-new-partitions"] = False
logger.log("Forcing old partition layout via command-line")
elif opt == "--cc-preparations":
constants.CC_PREPARATIONS = True
results['network-backend'] = constants.NETWORK_BACKEND_BRIDGE
if boot_console and not serial_console:
serial_console = boot_console
boot_serial = True
if serial_console:
try:
results['serial-console'] = hardware.SerialPort.from_string(
serial_console)
results['boot-serial'] = boot_serial
logger.log(
"Serial console specified on command-line: %s, default boot: %s"
% (serial_console, boot_serial))
except:
pass
interactive = True
try:
if os.path.isfile(constants.defaults_data_file):
data_file = open(constants.defaults_data_file)
try:
defaults = json.load(data_file)
finally:
data_file.close()
results.update(defaults)
# loading an answerfile?
assert ui is not None or answerfile_address is not None or answerfile_script is not None
if answerfile_address and answerfile_script:
raise RuntimeError(
"Both answerfile and answerfile generator passed on command line."
)
a = None
parsing_except = None
if answerfile_address:
a = answerfile.Answerfile.fetch(answerfile_address)
elif answerfile_script:
a = answerfile.Answerfile.generate(answerfile_script)
if a:
interactive = False
results['network-hardware'] = netutil.scanConfiguration()
try:
results.update(a.parseScripts())
results.update(a.processAnswerfileSetup())
if ui and results.get('ui-confirmation-prompt', False):
if not ui.init.confirm_proceed():
logger.log("User did not confirm installation. Reboot")
return constants.EXIT_USER_CANCEL
if 'extra-repos' in results:
# load drivers now
for media, address in results['extra-repos']:
for r in repository.repositoriesFromDefinition(
media, address, drivers=True):
r.installPackages(lambda x: (), {'root': '/'})
if 'fcoe-interfaces' in results:
fcoeutil.start_fcoe(results['fcoe-interfaces'])
util.runCmd2(util.udevsettleCmd())
time.sleep(1)
diskutil.mpath_part_scan()
# ensure partitions/disks are not locked by LVM
lvm = disktools.LVMTool()
lvm.deactivateAll()
del lvm
diskutil.log_available_disks()
results.update(a.processAnswerfile())
results = fixMpathResults(results)
except Exception as e:
logger.logException(e)
parsing_except = e
results['extra-repos'] += extra_repo_defs
logger.log("Driver repos: %s" % str(results['extra-repos']))
scripts.run_scripts('installation-start')
if parsing_except:
raise parsing_except
# log the modules that we loaded:
logger.log("All needed modules should now be loaded. We have loaded:")
util.runCmd2(["lsmod"])
status = constants.EXIT_OK
# how much RAM do we have?
ram_found_mb = hardware.getHostTotalMemoryKB() / 1024
ram_warning = ram_found_mb < constants.MIN_SYSTEM_RAM_MB
vt_warning = not hardware.VTSupportEnabled()
# Generate the UI sequence and populate some default
# values in backend input. Note that not all these screens
# will be displayed as they have conditional to skip them at
# the start of each function. In future these conditionals will
# be moved into the sequence definition and evaluated by the
# UI dispatcher.
aborted = False
if ui and interactive:
uiexit = ui.installer.runMainSequence(results, ram_warning,
vt_warning,
suppress_extra_cd_dialog)
if uiexit == uicontroller.EXIT:
aborted = True
if not aborted:
if results['install-type'] == constants.INSTALL_TYPE_RESTORE:
logger.log('INPUT ANSWER DICTIONARY')
backend.prettyLogAnswers(results)
logger.log("SCRIPTS DICTIONARY:")
backend.prettyLogAnswers(scripts.script_dict)
logger.log("Starting actual restore")
backup = results['backup-to-restore']
if ui:
pd = tui.progress.initProgressDialog(
"Restoring %s" % backup,
"Restoring data - this may take a while...", 100)
def progress(x):
if ui and pd:
tui.progress.displayProgressDialog(x, pd)
restore.restoreFromBackup(backup, progress)
if ui:
tui.progress.clearModelessDialog()
tui.progress.OKDialog(
"Restore",
"The restore operation completed successfully.")
else:
logger.log("Starting actual installation")
backend.performInstallation(results, ui, interactive)
if ui and interactive:
ui.installer.screens.installation_complete()
logger.log("The installation completed successfully.")
else:
logger.log(
"The user aborted the installation from within the user interface."
)
status = constants.EXIT_USER_CANCEL
except Exception as e:
try:
# first thing to do is to get the traceback and log it:
ex = sys.exc_info()
err = str.join("", traceback.format_exception(*ex))
logger.log("INSTALL FAILED.")
logger.log("A fatal exception occurred:")
logger.log(err)
# run the user's scripts - an arg of "1" indicates failure
scripts.run_scripts('installation-complete', '1')
# collect logs where possible
xelogging.collectLogs("/tmp")
# now display a friendly error dialog:
if ui:
ui.exn_error_dialog("install-log", True, interactive)
else:
txt = constants.error_string(str(e), 'install-log', True)
logger.log(txt)
# and now on the disk if possible:
if 'primary-disk' in results and 'primary-partnum' in results and 'logs-partnum' in results:
backend.writeLog(results['primary-disk'],
results['primary-partnum'],
results['logs-partnum'])
elif 'primary-disk' in results and 'primary-partnum' in results:
backend.writeLog(results['primary-disk'],
results['primary-partnum'], None)
logger.log(results)
except Exception as e:
# Don't let logging exceptions prevent subsequent actions
print 'Logging failed: ' + str(e)
# exit with failure status:
status = constants.EXIT_ERROR
else:
# run the user's scripts - an arg of "0" indicates success
try:
scripts.run_scripts('installation-complete', '0')
except:
pass
# put the log in /tmp:
xelogging.collectLogs('/tmp')
# and now on the disk if possible:
if 'primary-disk' in results and 'primary-partnum' in results and 'logs-partnum' in results:
backend.writeLog(results['primary-disk'],
results['primary-partnum'],
results['logs-partnum'])
elif 'primary-disk' in results and 'primary-partnum' in results:
backend.writeLog(results['primary-disk'],
results['primary-partnum'], None)
assert (status == constants.EXIT_OK
or status == constants.EXIT_USER_CANCEL)
return status
def confirm_load_repo(answers, label, installed_repos):
cap_label = ' '.join(map(lambda a: a.capitalize(), label.split()))
if 'source-media' in answers and 'source-address' in answers:
media = answers['source-media']
address = answers['source-address']
else:
media = 'local'
address = ''
try:
tui.progress.showMessageDialog("Please wait",
"Searching for repository...")
repos = repository.repositoriesFromDefinition(
media, address, drivers=(label == 'driver'))
tui.progress.clearModelessDialog()
except:
ButtonChoiceWindow(
tui.screen, "Error",
"""Unable to access location specified. Please check the address was valid and/or that the media was inserted correctly, and try again.""",
['Back'])
return LEFT_BACKWARDS
if label != 'driver':
repos = filter(
lambda r: r.identifier() != constants.MAIN_REPOSITORY_NAME, repos)
if len(repos) == 0:
ButtonChoiceWindow(
tui.screen, "No %s Found" % cap_label,
"""No %s compatible %ss were found at the location specified. Please check the address was valid and/or that the media was inserted correctly, and try again."""
% (version.PRODUCT_BRAND or version.PLATFORM_NAME, label),
['Back'])
return LEFT_BACKWARDS
USE, VERIFY, BACK = range(3)
default_button = BACK
if len(repos) == 1:
text = TextboxReflowed(54, "The following %s was found:\n\n" % label)
else:
text = TextboxReflowed(54, "The following %ss were found:\n\n" % label)
buttons = ButtonBar(tui.screen, [('Use', 'use'), ('Verify', 'verify'),
('Back', 'back')])
cbt = CheckboxTree(4, scroll=1)
for r in repos:
if str(r) in installed_repos:
cbt.append("%s (already installed)" % r.name(), r, False)
else:
cbt.append(r.name(), r, True)
default_button = VERIFY
gf = GridFormHelp(tui.screen, 'Load Repository', 'loadrepo', 1, 3)
gf.add(text, 0, 0, padding=(0, 0, 0, 1))
gf.add(cbt, 0, 1, padding=(0, 0, 0, 1))
gf.add(buttons, 0, 2, growx=1)
gf.draw()
done = False
while not done:
gf.setCurrent(buttons.list[default_button][0])
rc = buttons.buttonPressed(gf.run())
selected_repos = cbt.getSelection()
if rc in [None, 'use']:
done = True
elif rc == 'back':
tui.screen.popWindow()
return LEFT_BACKWARDS
elif rc == 'verify' and len(selected_repos) > 0:
if media == 'local':
text2 = "\n\nWould you like to test your media?"
else:
text2 = "\n\nWould you like to test your %s repository? This may cause significant network traffic." % label
rc2 = ButtonChoiceWindow(tui.screen,
"Repository Information",
text2, ['Ok', 'Back'],
width=60)
if rc2 == 'ok' and interactive_source_verification(
selected_repos, label):
default_button = USE
tui.screen.popWindow()
answers['repos'] = selected_repos
return RIGHT_FORWARDS
def confirm_load_repo(answers, label, installed_repos):
cap_label = ' '.join(map(lambda a: a.capitalize(), label.split()))
if 'source-media' in answers and 'source-address' in answers:
media = answers['source-media']
address = answers['source-address']
else:
media = 'local'
address = ''
try:
tui.progress.showMessageDialog("Please wait", "Searching for repository...")
repos = repository.repositoriesFromDefinition(media, address)
tui.progress.clearModelessDialog()
except:
ButtonChoiceWindow(
tui.screen, "Error",
"""Unable to access location specified. Please check the address was valid and/or that the media was inserted correctly, and try again.""",
['Back'])
return LEFT_BACKWARDS
if label == 'driver':
repos = filter(lambda r: True in map(lambda p: p.type.startswith('driver'), r), repos)
else:
repos = filter(lambda r: r.identifier() != constants.MAIN_REPOSITORY_NAME, repos)
if len(repos) == 0:
ButtonChoiceWindow(
tui.screen, "No %s Found" % cap_label,
"""No %s compatible %ss were found at the location specified. Please check the address was valid and/or that the media was inserted correctly, and try again.""" % (version.PRODUCT_BRAND or version.PLATFORM_NAME, label),
['Back'])
return LEFT_BACKWARDS
USE, VERIFY, BACK = range(3)
default_button = BACK
if len(repos) == 1:
text = TextboxReflowed(54, "The following %s was found:\n\n" % label)
else:
text = TextboxReflowed(54, "The following %ss were found:\n\n" % label)
buttons = ButtonBar(tui.screen, [('Use', 'use'), ('Verify', 'verify'), ('Back', 'back')])
cbt = CheckboxTree(4, scroll = 1)
for r in repos:
if str(r) in installed_repos:
cbt.append("%s (already installed)" % r.name(), r, False)
else:
cbt.append(r.name(), r, True)
default_button = VERIFY
gf = GridFormHelp(tui.screen, 'Load Repository', 'loadrepo', 1, 3)
gf.add(text, 0, 0, padding = (0, 0, 0, 1))
gf.add(cbt, 0, 1, padding = (0, 0, 0, 1))
gf.add(buttons, 0, 2, growx = 1)
gf.draw()
done = False
while not done:
gf.setCurrent(buttons.list[default_button][0])
rc = buttons.buttonPressed(gf.run())
selected_repos = cbt.getSelection()
if rc in [None, 'use']:
done = True
elif rc == 'back':
tui.screen.popWindow()
return LEFT_BACKWARDS
elif rc == 'verify' and len(selected_repos) > 0:
hashes = [" %s %s" % (r.md5sum(), r.name()) for r in selected_repos]
text2 = "The following MD5 hashes have been calculated. Please check them against those provided by the supplier:\n\n"
text2 += "\n".join(hashes)
if media == 'local':
text2 += "\n\nWould you like to test your media?"
else:
text2 += "\n\nWould you like to test your %s repository? This may cause significant network traffic." % label
rc2 = ButtonChoiceWindow(
tui.screen, "Repository Information", text2, ['Ok', 'Back'], width = 60)
if rc2 == 'ok' and interactive_source_verification(selected_repos, label):
default_button = USE
tui.screen.popWindow()
answers['repos'] = selected_repos
return RIGHT_FORWARDS
def go(ui, args, answerfile_address, answerfile_script):
extra_repo_defs = []
results = {
'keymap': None,
'serial-console': None,
'operation': init_constants.OPERATION_INSTALL,
'boot-serial': False,
'extra-repos': [],
'network-backend': constants.NETWORK_BACKEND_DEFAULT,
'root-password': ('pwdhash', '!!'),
'create-new-partitions':
True, # FALSE = DOS | TRUE = GPT set via command line only with --disable-gpt
'new-partition-layout':
False, # TRUE = GPT with LOG,BACKUP,ROOT,BOOT,SWAP,SR automatically set during install/upgrade
}
suppress_extra_cd_dialog = False
serial_console = None
boot_console = None
boot_serial = False
if not xen_control_domain() or args.has_key('--virtual'):
hardware.useVMHardwareFunctions()
for (opt, val) in args.items():
if opt == "--boot-console":
# takes precedence over --console
if hardware.is_serialConsole(val):
boot_console = hardware.getSerialConfig()
elif opt == "--console":
for console in val:
if hardware.is_serialConsole(console):
serial_console = hardware.getSerialConfig()
if hardware.is_serialConsole(val[-1]):
boot_serial = True
elif opt == "--keymap":
results["keymap"] = val
xelogging.log("Keymap specified on command-line: %s" % val)
elif opt == "--extrarepo":
extra_repo_defs += val
elif opt == "--onecd":
suppress_extra_cd_dialog = True
elif opt == "--disable-gpt":
constants.GPT_SUPPORT = False
results["create-new-partitions"] = False
xelogging.log("Forcing old partition layout via command-line")
if boot_console and not serial_console:
serial_console = boot_console
boot_serial = True
if serial_console:
try:
results['serial-console'] = hardware.SerialPort.from_string(
serial_console)
results['boot-serial'] = boot_serial
xelogging.log(
"Serial console specified on command-line: %s, default boot: %s"
% (serial_console, boot_serial))
except:
pass
interactive = True
try:
if os.path.isfile(constants.defaults_data_file):
data_file = open(constants.defaults_data_file)
try:
defaults = json.load(data_file)
finally:
data_file.close()
results.update(defaults)
# loading an answerfile?
assert ui != None or answerfile_address != None or answerfile_script != None
if answerfile_address and answerfile_script:
raise RuntimeError, "Both answerfile and answerfile generator passed on command line."
a = None
parsing_except = None
if answerfile_address:
a = answerfile.Answerfile.fetch(answerfile_address)
elif answerfile_script:
a = answerfile.Answerfile.generate(answerfile_script)
if a:
interactive = False
results['network-hardware'] = netutil.scanConfiguration()
try:
results.update(a.parseScripts())
results.update(a.processAnswerfileSetup())
if ui and results.get('ui-confirmation-prompt', False):
if not ui.init.confirm_proceed():
xelogging.log(
"User did not confirm installation. Reboot")
return constants.EXIT_USER_CANCEL
if results.has_key('extra-repos'):
# load drivers now
for media, address in results['extra-repos']:
for r in repository.repositoriesFromDefinition(
media, address, drivers=True):
r.installPackages(lambda x: (), {'root': '/'})
if 'fcoe-interfaces' in results:
fcoeutil.start_fcoe(results['fcoe-interfaces'])
util.runCmd2(util.udevsettleCmd())
time.sleep(1)
diskutil.mpath_part_scan()
# ensure partitions/disks are not locked by LVM
lvm = disktools.LVMTool()
lvm.deactivateAll()
del lvm
diskutil.log_available_disks()
results.update(a.processAnswerfile())
results = fixMpathResults(results)
except Exception, e:
xelogging.logException(e)
parsing_except = e
results['extra-repos'] += extra_repo_defs
xelogging.log("Driver repos: %s" % str(results['extra-repos']))
scripts.run_scripts('installation-start')
if parsing_except:
raise parsing_except
# log the modules that we loaded:
xelogging.log(
"All needed modules should now be loaded. We have loaded:")
util.runCmd2(["lsmod"])
status = constants.EXIT_OK
# how much RAM do we have?
ram_found_mb = hardware.getHostTotalMemoryKB() / 1024
ram_warning = ram_found_mb < constants.MIN_SYSTEM_RAM_MB
vt_warning = not hardware.VTSupportEnabled()
# Generate the UI sequence and populate some default
# values in backend input. Note that not all these screens
# will be displayed as they have conditional to skip them at
# the start of each function. In future these conditionals will
# be moved into the sequence definition and evaluated by the
# UI dispatcher.
aborted = False
if ui and interactive:
uiexit = ui.installer.runMainSequence(results, ram_warning,
vt_warning,
suppress_extra_cd_dialog)
if uiexit == uicontroller.EXIT:
aborted = True
if not aborted:
if results['install-type'] == constants.INSTALL_TYPE_RESTORE:
xelogging.log('INPUT ANSWER DICTIONARY')
backend.prettyLogAnswers(results)
xelogging.log("SCRIPTS DICTIONARY:")
backend.prettyLogAnswers(scripts.script_dict)
xelogging.log("Starting actual restore")
backup = results['backup-to-restore']
if ui:
pd = tui.progress.initProgressDialog(
"Restoring %s" % backup,
"Restoring data - this may take a while...", 100)
def progress(x):
if ui and pd:
tui.progress.displayProgressDialog(x, pd)
restore.restoreFromBackup(backup, progress)
if ui:
tui.progress.clearModelessDialog()
tui.progress.OKDialog(
"Restore",
"The restore operation completed successfully.")
else:
xelogging.log("Starting actual installation")
backend.performInstallation(results, ui, interactive)
if ui and interactive:
ui.installer.screens.installation_complete()
xelogging.log("The installation completed successfully.")
else:
xelogging.log(
"The user aborted the installation from within the user interface."
)
status = constants.EXIT_USER_CANCEL
def confirm_load_drivers(answers):
# find drivers:
try:
tui.progress.showMessageDialog("Please wait", "Searching for drivers...")
repos = repository.repositoriesFromDefinition(
answers['source-media'], answers['source-address'])
tui.progress.clearModelessDialog()
except:
ButtonChoiceWindow(
tui.screen, "Error",
"""Unable to access location specified. Please check the address was valid and/or that the media was inserted correctly, and try again.""",
['Back'])
return LEFT_BACKWARDS
drivers = []
id_list = []
for r in repos:
has_drivers = False
for p in r:
if p.type.startswith("driver"):
if p.is_compatible():
has_drivers = True
else:
xelogging.log("Driver %s is not compatible, skipping" % p.name)
if has_drivers:
drivers.append(p)
id_list.append(r.identifier())
if len(drivers) == 0:
ButtonChoiceWindow(
tui.screen, "No Drivers Found",
"""No compatible drivers were found at the location specified. Please check the address was valid and/or that the media was inserted correctly, and try again.
Note that this driver-loading mechanism is only compatible with media/locations containing %s repositories. Check the installation guide for more information.""" % (PRODUCT_BRAND or PLATFORM_NAME),
['Back'], width = 50)
return LEFT_BACKWARDS
else:
if len(drivers) == 1:
text = "The following driver was found:\n\n"
elif len(drivers) > 1:
text = "The following drivers were found:\n\n"
for d in drivers:
text += " * %s\n" % d.name
while True:
rc = ButtonChoiceWindow(
tui.screen, "Load Drivers", text, ['Load drivers', 'Info', 'Back'])
if rc == 'back': return LEFT_BACKWARDS
elif rc == 'info':
hashes = [" %s %s" % (r.md5sum(), r.name()) for r in repos]
text2 = "The following MD5 hashes have been calculated. Please check them against those provided by the driver supplier:\n\n"
text2 += "\n".join(hashes)
ButtonChoiceWindow(
tui.screen, "Driver Repository Information", text2, ['Ok'])
else:
break
answers['repos'] = repos
answers['id-list'] = id_list
return RIGHT_FORWARDS
def go(ui, args, answerfile_address, answerfile_script):
extra_repo_defs = []
results = {
'keymap': None,
'serial-console': None,
'operation': init_constants.OPERATION_INSTALL,
'boot-serial': False,
'extra-repos': [],
'network-backend': constants.NETWORK_BACKEND_DEFAULT,
}
suppress_extra_cd_dialog = False
serial_console = None
boot_console = None
boot_serial = False
if not xen_control_domain() or args.has_key('--virtual'):
hardware.useVMHardwareFunctions()
for (opt, val) in args.items():
if opt == "--boot-console":
# takes precedence over --console
if hardware.is_serialConsole(val):
boot_console = hardware.getSerialConfig()
elif opt == "--console":
for console in val:
if hardware.is_serialConsole(console):
serial_console = hardware.getSerialConfig()
if hardware.is_serialConsole(val[-1]):
boot_serial = True
elif opt == "--keymap":
results["keymap"] = val
xelogging.log("Keymap specified on command-line: %s" % val)
elif opt == "--extrarepo":
extra_repo_defs += val
elif opt == "--onecd":
suppress_extra_cd_dialog = True
elif opt == "--disable-gpt":
constants.GPT_SUPPORT = False
if boot_console and not serial_console:
serial_console = boot_console
boot_serial = True
if serial_console:
try:
results['serial-console'] = hardware.SerialPort.from_string(serial_console)
results['boot-serial'] = boot_serial
xelogging.log("Serial console specified on command-line: %s, default boot: %s" %
(serial_console, boot_serial))
except:
pass
interactive = True
try:
# loading an answerfile?
assert ui != None or answerfile_address != None or answerfile_script != None
if answerfile_address and answerfile_script:
raise RuntimeError, "Both answerfile and answerfile generator passed on command line."
a = None
if answerfile_address:
a = answerfile.Answerfile(answerfile_address)
elif answerfile_script:
a = answerfile.Answerfile.generate(answerfile_script)
if a:
interactive = False
results['network-hardware'] = netutil.scanConfiguration()
results.update(a.parseScripts())
results.update(a.processAnswerfile())
if results.has_key('extra-repos'):
# load drivers now
for d in results['extra-repos']:
media, address, _ = d
for r in repository.repositoriesFromDefinition(media, address):
for p in r:
if p.type.startswith('driver'):
if p.load() != 0:
raise RuntimeError, "Failed to load driver %s." % p.name
results['extra-repos'] += extra_repo_defs
xelogging.log("Driver repos: %s" % str(results['extra-repos']))
scripts.run_scripts('installation-start')
# log the modules that we loaded:
xelogging.log("All needed modules should now be loaded. We have loaded:")
util.runCmd2(["/bin/lsmod"])
status = constants.EXIT_OK
# debug: print out what disks have been discovered
diskutil.log_available_disks()
# how much RAM do we have?
ram_found_mb = hardware.getHostTotalMemoryKB() / 1024
ram_warning = ram_found_mb < constants.MIN_SYSTEM_RAM_MB
vt_warning = not hardware.VTSupportEnabled()
# Generate the UI sequence and populate some default
# values in backend input. Note that not all these screens
# will be displayed as they have conditional to skip them at
# the start of each function. In future these conditionals will
# be moved into the sequence definition and evaluated by the
# UI dispatcher.
aborted = False
if ui and interactive:
uiexit = ui.installer.runMainSequence(
results, ram_warning, vt_warning, suppress_extra_cd_dialog
)
if uiexit == uicontroller.EXIT:
aborted = True
if not aborted:
if results['install-type'] == constants.INSTALL_TYPE_RESTORE:
xelogging.log("Starting actual restore")
backup = results['backup-to-restore']
if ui:
pd = tui.progress.initProgressDialog("Restoring",
"Restoring data - this may take a while...",
100)
def progress(x):
if ui and pd:
tui.progress.displayProgressDialog(x, pd)
restore.restoreFromBackup(backup.partition, backup.root_disk, progress)
if pd:
tui.progress.clearModelessDialog()
tui.progress.OKDialog("Restore", "The restore operation completed successfully.")
else:
xelogging.log("Starting actual installation")
results = backend.performInstallation(results, ui, interactive)
if ui and interactive:
ui.installer.screens.installation_complete()
xelogging.log("The installation completed successfully.")
else:
xelogging.log("The user aborted the installation from within the user interface.")
status = constants.EXIT_USER_CANCEL
except Exception, e:
try:
# first thing to do is to get the traceback and log it:
ex = sys.exc_info()
err = str.join("", traceback.format_exception(*ex))
xelogging.log("INSTALL FAILED.")
xelogging.log("A fatal exception occurred:")
xelogging.log(err)
# run the user's scripts - an arg of "1" indicates failure
scripts.run_scripts('installation-complete', '1')
# collect logs where possible
xelogging.collectLogs("/tmp")
# now display a friendly error dialog:
if ui:
ui.exn_error_dialog("install-log", True, interactive)
else:
txt = constants.error_string(str(e), 'install-log', True)
xelogging.log(txt)
# and now on the disk if possible:
if 'primary-disk' in results and 'primary-partnum' in results:
backend.writeLog(results['primary-disk'], results['primary-partnum'])
xelogging.log(results)
except Exception, e:
# Don't let logging exceptions prevent subsequent actions
print 'Logging failed: '+str(e)