def bisecNormalAtEnd(crv, compare):
print('at end')
p0 = rs.CurveEndPoint(crv)
n1s = curvePlnrNormalAtEnds(crv)
n1 = n1s[1]
n2 = None
#
# rs.AddPoint(p0)
# print('p0:',p0)
# print('pS:',rs.CurveStartPoint(compare))
# print('pE:',rs.CurveEndPoint(compare))
n2s = curvePlnrNormalAtEnds(compare)
if p0 == rs.CurveStartPoint(compare):
n2 = n2s[0]
print('found startpoint match')
elif p0 == rs.CurveEndPoint(compare):
n2 = n2s[1]
print('found endpoint match')
else:
return None
#rs.AddLine(p0,p0+n2)
#rs.AddLine(p0,p0+n1)
n = (n1 + n2) / 2
#rs.AddLine(p0,p0+n)
return n
def bisecNormalAtStart(crv, compare):
tolerance = 0.001
print('at start')
p0 = rs.CurveStartPoint(crv)
n1s = curvePlnrNormalAtEnds(crv)
n1 = n1s[0]
n2 = None
#rs.AddPoint(p0)
print('p0:', p0)
print('pS:', rs.CurveStartPoint(compare))
print('pE:', rs.CurveEndPoint(compare))
compStart = rs.CurveStartPoint(compare)
compEnd = rs.CurveEndPoint(compare)
#rs.AddLine(compStart,compStart+Point3d(0,1,0))
#rs.AddLine(compEnd,compEnd+Point3d(0,1,0))
n2s = curvePlnrNormalAtEnds(compare)
if rs.Distance(p0, compStart) < tolerance:
n2 = n2s[0]
print('found startpoint match')
elif rs.Distance(p0, compEnd) < tolerance:
n2 = n2s[1]
print('found endpoint match')
else:
print('match not found')
return None
# rs.AddLine(p0,p0+n2)
# rs.AddLine(p0,p0+n1)
n = (n1 + n2) / 2
#rs.AddLine(p0,p0+n)
return n
def SortCurves(curves, torrent=0.001):
"""将多条曲线组成的闭合环线,按照首尾相连的顺序重新排列
"""
newCurves = []
newCurves.append(curves[0])
crvs = curves[:]
del crvs[0]
startP0 = rs.CurveStartPoint(newCurves[-1])
for i in range(len(curves) - 1):
endP0 = rs.CurveEndPoint(newCurves[-1])
# if (rs.Distance(startP0,endP0)<torrent):
# break
flag = False
for crv in crvs:
sp = rs.CurveStartPoint(crv)
ep = rs.CurveEndPoint(crv)
if (rs.Distance(sp, endP0) < torrent):
flag = True
crvs.remove(crv)
break
if (rs.Distance(ep, endP0) < torrent):
crvObj = rs.coercerhinoobject(crv).Geometry
crvs.remove(crv)
crv = ghc.FlipCurve(crvObj)[0]
print('flip')
flag = True
break
if not flag:
print('erro:出现孤立的线')
return None
newCurves.append(crv)
return newCurves
def mergeCoincidentLines(segments):
"""
removes coincident, consecutive segments
input: List of GUIDs
returns: List of GUIDs
"""
newSegments = []
i = 0
while i < len(segments):
if (i < len(segments) - 1): #if coincident, delete both, add new.
a = rs.VectorCreate(rs.CurveStartPoint(segments[i]),
rs.CurveEndPoint(segments[i]))
b = rs.VectorCreate(rs.CurveStartPoint(segments[i + 1]),
rs.CurveEndPoint(segments[i + 1]))
a = rs.VectorUnitize(a)
b = rs.VectorUnitize(b)
aAng = rs.VectorAngle(a, b)
if (aAng < .00001):
newLine = rs.AddLine(rs.CurveStartPoint(segments[i]),
rs.CurveEndPoint(segments[i + 1]))
rs.DeleteObject(segments[i])
rs.DeleteObject(segments[i + 1])
newSegments.append(newLine)
i = i + 2
else:
newSegments.append(
segments[i]) #if not coincident, add to array
i = i + 1
else:
newSegments.append(segments[i]) #add last seg to array
i = i + 1
return newSegments
def isShareEdge(srf1, srf2):
border1 = rs.DuplicateSurfaceBorder(srf1)
border2 = rs.DuplicateSurfaceBorder(srf2)
edges1 = rs.ExplodeCurves(border1, True)
edges2 = rs.ExplodeCurves(border2, True)
shareMid = []
threshold = 0.001
flag = False
for e1 in edges1:
for e2 in edges2:
mid1 = rs.CurveMidPoint(e1)
mid2 = rs.CurveMidPoint(e2)
if rs.Distance(mid1, mid2) < threshold:
s1 = rs.CurveStartPoint(e1)
s2 = rs.CurveStartPoint(e2)
e1 = rs.CurveEndPoint(e1)
e2 = rs.CurveEndPoint(e2)
if rs.Distance(s1, s1) < threshold:
flag = True
break
if rs.Distance(s1, e1) < threshold:
flag = True
break
rs.DeleteObjects(edges1)
rs.DeleteObjects(edges2)
return flag
def get_pocket_entry(self, z_level, translation, pocket_list):
revised_list = []
last_obj = None
for obj in pocket_list:
if obj != "sec_plane":
revised_list.append(rs.CopyObject(obj, translation))
else:
if last_obj != obj:
revised_list.append(obj)
last_obj = obj
pocket_list = revised_list
for i in range(0, len(pocket_list)):
crv = pocket_list[i]
if crv == "sec_plane": #Cambio intermedio
pep = rs.CurveEndPoint(pocket_list[i - 1])
try:
nsp = rs.CurveStartPoint(pocket_list[i + 1])
except:
npt = rs.CurveStartPoint(self.cut_curve)
nsp = (npt[0], npt[1], z_level)
points = [
rs.CurveEndPoint(pocket_list[i - 1]),
(pep[0], pep[1], self.general_input["sec_plane"]),
(nsp[0], nsp[1], self.general_input["sec_plane"]), nsp
]
travel_line = rs.AddPolyline(points)
rs.ObjectColor(travel_line, color_palette["cut"])
pocket_list[i] = travel_line
return pocket_list
def finish_pocket_curves(self, crv_list):
block_curves = []
for i in range(0, len(crv_list)):
if i == 0:
pep = rs.CurveEndPoint(self.cut_curve)
csp = rs.CurveStartPoint(crv_list[i])
join_line = rs.AddLine(pep, csp)
rs.ObjectColor(join_line, color_palette["cut"])
block_curves.append(join_line)
crv = crv_list[i]
if crv == "sec_plane":
block_curves.append(crv)
else:
try:
if i < len(crv_list) and crv_list[i + 1] != "sec_plane":
nsp = rs.CurveStartPoint(crv_list[i + 1])
cep = rs.CurveEndPoint(crv_list[i])
join_line = rs.AddLine(cep, nsp)
rs.ObjectColor(join_line, color_palette["cut"])
block_curves.append(crv_list[i])
block_curves.append(join_line)
else:
block_curves.append(crv)
except:
pass
return block_curves
def InsulationPanel(left_edge, right_edge):
points = []
#insulation_left = ver_line_split_even[i]
point_1 = rs.CurveStartPoint(left_edge)
point_2 = rs.CurveEndPoint(left_edge)
#insulation_right = ver_line_split_even[i + next_even_Cource]
point_3 = rs.CurveEndPoint(right_edge)
point_4 = rs.CurveStartPoint(right_edge)
trans = rs.XformTranslation((0, 0, ipThick))
point_5 = rs.PointTransform(point_1, trans)
point_6 = rs.PointTransform(point_2, trans)
point_7 = rs.PointTransform(point_3, trans)
point_8 = rs.PointTransform(point_4, trans)
points.append(point_1)
points.append(point_2)
points.append(point_3)
points.append(point_4)
points.append(point_5)
points.append(point_6)
points.append(point_7)
points.append(point_8)
insulation = rs.AddBox(points)
return insulation
def createPipe(self, first, mid, last, text):
first_fillet = rs.AddFilletCurve(first, mid, 0.25)
fillet_points = rs.CurveFilletPoints(first, mid, 0.25)
first_circle = rs.AddCircle(fillet_points[2], 0.125)
first_cp = rs.CurveClosestPoint(first, fillet_points[0])
first_domain = rs.CurveDomain(first)
nfirst = rs.TrimCurve(first, (first_domain[0], first_cp), False)
second_cp = rs.CurveClosestPoint(mid, fillet_points[1])
second_domain = rs.CurveDomain(mid)
nmid = rs.TrimCurve(mid, (second_cp, second_domain[1]), False)
second_fillet = rs.AddFilletCurve(mid, last, 0.25)
fillet_points = rs.CurveFilletPoints(mid, last, 0.25)
second_circle = rs.AddCircle(fillet_points[2], 0.125)
first_cp = rs.CurveClosestPoint(mid, fillet_points[0])
first_domain = rs.CurveDomain(mid)
nmid = rs.TrimCurve(nmid, (first_domain[0], first_cp), False)
second_cp = rs.CurveClosestPoint(last, fillet_points[1])
second_domain = rs.CurveDomain(last)
nlast = rs.TrimCurve(last, (second_cp, second_domain[1]), False)
curve = rs.JoinCurves(
[nfirst, first_fillet, nmid, second_fillet, nlast])
print curve
pipe = rs.AddPipe(curve, 0, 0.09375, 0, 1)
points = [
rs.CurveStartPoint(first),
rs.CurveEndPoint(first),
rs.CurveStartPoint(last),
rs.CurveEndPoint(last)
]
self.copyAndMover(first, mid, last, points, text)
def Sierpinsky_triangle(triangle):
if rs.CurveLength(triangle[0]) < smallestCurve:
return
else:
#make left triangle
line1 = rs.AddLine(rs.CurveStartPoint(triangle[0]),
rs.CurveMidPoint(triangle[0]))
line2 = rs.AddLine(rs.CurveMidPoint(triangle[0]),
rs.CurveMidPoint(triangle[2]))
line3 = rs.AddLine(rs.CurveMidPoint(triangle[2]),
rs.CurveStartPoint(triangle[0]))
#make right triangle
line4 = rs.AddLine(rs.CurveMidPoint(triangle[0]),
rs.CurveEndPoint(triangle[0]))
line5 = rs.AddLine(rs.CurveEndPoint(triangle[0]),
rs.CurveMidPoint(triangle[1]))
line6 = rs.AddLine(rs.CurveMidPoint(triangle[1]),
rs.CurveMidPoint(triangle[0]))
#make top triangle
line7 = rs.AddLine(rs.CurveMidPoint(triangle[2]),
rs.CurveMidPoint(triangle[1]))
line8 = rs.AddLine(rs.CurveMidPoint(triangle[1]),
rs.CurveEndPoint(triangle[1]))
line9 = rs.AddLine(rs.CurveStartPoint(triangle[2]),
rs.CurveMidPoint(triangle[2]))
#recurse
Sierpinsky_triangle([line1, line2, line3])
Sierpinsky_triangle([line4, line5, line6])
Sierpinsky_triangle([line7, line8, line9])
def get_ref_pts(ref_obj, srf_num, indexes):
obj_copy = rs.CopyObject(ref_obj)
all_srf = rs.ExplodePolysurfaces(obj_copy)
ref_srf = rs.DuplicateSurfaceBorder(all_srf[srf_num])
ref_lines = rs.ExplodeCurves(ref_srf)
ref_points = [
rs.CurveEndPoint(ref_lines[indexes[0]]),
rs.CurveEndPoint(ref_lines[indexes[1]]),
rs.CurveEndPoint(ref_lines[indexes[2]])
]
return ref_points
def close_curve():
curve_a = curves[0]
curve_b = curves[1]
points_a = [rs.CurveStartPoint(curve_a), rs.CurveEndPoint(curve_a)]
points_b = [rs.CurveStartPoint(curve_b), rs.CurveEndPoint(curve_b)]
for test_point in points_a:
closest_point = rs.PointArrayClosestPoint(points_b, test_point)
curves.append(rs.AddLine(test_point, points_b[closest_point]))
points_b.pop(closest_point)
rs.JoinCurves(curves, True)
print "Curves closed"
def get_line_coordinates(guids):
if isinstance(guids, System.Guid):
sp = map(float, rs.CurveStartPoint(guids))
ep = map(float, rs.CurveEndPoint(guids))
return sp, ep
lines = []
for guid in guids:
sp = map(float, rs.CurveStartPoint(guid))
ep = map(float, rs.CurveEndPoint(guid))
lines.append((sp, ep))
return lines
def offset():
curves = [curve]
offset_curve = rs.OffsetCurve(curve, dir, dist)
curves.append(offset_curve)
curves.append(
rs.AddLine(rs.CurveEndPoint(offset_curve), rs.CurveEndPoint(curve)))
curves.append(
rs.AddLine(rs.CurveStartPoint(offset_curve),
rs.CurveStartPoint(curve)))
rs.JoinCurves(curves, True)
print "Offset created."
def addExtlHandrail(self):
hdrlPtList = []
hdrlEndPt = rs.AddPoint(rs.CurveEndPoint(self.guideCrv))
hdrlStPt = rs.AddPoint(rs.CurveStartPoint(self.guideCrv))
hdrlVec = rs.VectorCreate(hdrlStPt, hdrlEndPt)
projHdrlVec = rs.VectorUnitize([hdrlVec.X, hdrlVec.Y, 0])
#Top Extension
topExtEndPt = rs.CopyObject(hdrlEndPt)
rs.MoveObject(topExtEndPt, rs.VectorScale(projHdrlVec, -.305))
hdrlPtList.append(topExtEndPt)
#Btm Extension (tread length method)
btmExtEndPt = rs.CopyObject(hdrlStPt)
btmPtExtTemp = rs.CopyObject(hdrlStPt)
btmVertPtExtTemp = rs.CopyObject(hdrlStPt)
rs.MoveObject(btmPtExtTemp, hdrlVec)
angledLineTemp = rs.AddLine(hdrlStPt, btmPtExtTemp)
rs.MoveObject(btmVertPtExtTemp, [0, 0, -1])
vertLineTemp = rs.AddLine(btmVertPtExtTemp, hdrlStPt)
rs.MoveObject(vertLineTemp,
rs.VectorScale(projHdrlVec, self.treadLength))
btmExtPt = rs.LineLineIntersection(angledLineTemp, vertLineTemp)[0]
hdrlPtList.append(hdrlEndPt)
hdrlPtList.append(btmExtPt)
#Make and move
hdrlCrv = rs.AddPolyline(hdrlPtList)
rs.MoveObject(hdrlCrv, [0, 0, self.hdrlHeight])
#move away from wall
widthVec = rs.VectorUnitize(
rs.VectorCreate(rs.CurveEndPoint(self.stairWidthEdge),
rs.CurveStartPoint(self.stairWidthEdge)))
rs.MoveObject(hdrlCrv, rs.VectorScale(widthVec, self.hdrlDistFromWall))
#cleanup
rs.DeleteObject(topExtEndPt)
rs.DeleteObject(hdrlEndPt)
rs.DeleteObject(hdrlStPt)
rs.DeleteObject(btmPtExtTemp)
rs.DeleteObject(btmVertPtExtTemp)
rs.DeleteObject(angledLineTemp)
rs.DeleteObject(vertLineTemp)
rs.DeleteObject(btmExtEndPt)
return hdrlCrv
def DrawDoubleLines(cls, layer, offsetType):
# startPoint
gp = Rhino.Input.Custom.GetPoint()
gp.SetCommandPrompt("Pick first point")
gp.Get()
if gp.CommandResult() != Rhino.Commands.Result.Success:
return gp.CommandResult()
point1 = gp.Point()
gp.Dispose()
# secondPoint
line00 = None
line01 = None
oldLayer = rs.CurrentLayer(layer)
while True:
gp = Rhino.Input.Custom.GetPoint()
gp.SetCommandPrompt("Pick second point")
gp.DrawLineFromPoint(point1, True)
gp.EnableDrawLineFromPoint(True)
gp.Get()
if gp.CommandResult() != Rhino.Commands.Result.Success:
rs.CurrentLayer(oldLayer)
return gp.CommandResult()
point2 = gp.Point()
if point2:
doubleLine = cls.MakeDoubleLine(config.DOUBLELINEWIDTH, point1,
point2, offsetType)
if (line00 != None) and (line01 != None):
line10, line11 = doubleLine.draw()
p0 = rs.LineLineIntersection(line00, line10)
p1 = rs.LineLineIntersection(line01, line11)
rs.AddLine(rs.CurveStartPoint(line00), p0[0])
rs.AddLine(rs.CurveStartPoint(line01), p1[0])
rs.DeleteObject(line00)
rs.DeleteObject(line01)
line00 = rs.AddLine(p0[1], rs.CurveEndPoint(line10))
line01 = rs.AddLine(p1[1], rs.CurveEndPoint(line11))
rs.DeleteObject(line10)
rs.DeleteObject(line11)
else:
line00, line01 = doubleLine.draw()
point1 = point2
else:
sc.errorhandler()
break
gp.Dispose()
rs.CurrentLayer(oldLayer)
def depressCrvs(crvs, paths, startPt, radius, sd):
newCrvs = []
for i in range(len(crvs)):
divPts = rs.DivideCurve(crvs[i], 100)
if i < len(crvs) - 1:
cntPt01 = centerCrv(crvs[i])
cntPt02 = centerCrv(crvs[i + 1])
horVec = rs.VectorCreate(cntPt01, cntPt02)
for j in range(len(divPts)):
path = rs.PointClosestObject(divPts[j], paths)[0]
param = rs.CurveClosestPoint(path, divPts[j])
close = rs.EvaluateCurve(path, param)
dist = rs.Distance(close, divPts[j])
tan = rs.CurveTangent(crvs[i], param)
vec = [0, 0, -1] #rs.VectorCrossProduct(horVec,tan)
testVec = rs.VectorCreate(cntPt01, divPts[j])
if rs.VectorDotProduct(vec, testVec) < 0:
rs.VectorReverse(vec)
vec = rs.VectorUnitize(vec)
border = 1
entry = 1
if j > len(divPts) / 2:
border = rs.Distance(rs.CurveEndPoint(crvs[i]), divPts[j])
else:
border = rs.Distance(rs.CurveStartPoint(crvs[i]), divPts[j])
if border < sd * 3:
border = border / (sd * 3)
entryDist = rs.Distance(startPt, divPts[j])
if entryDist < sd * 10:
entry = entryDist / (sd * 10)
if dist < sd * 2:
val = radius * (bellCrv(dist, sd))
divPts[j] = rs.PointAdd(divPts[j], vec * val * border * entry)
newCrvs.append(rs.AddCurve(divPts))
return divPts
def getAllEndPoints(crvs):
arrPoints = []
i = 0
for crv in crvs:
arrPoints.append(rs.CurveEndPoint(crv))
arrPoints.append(rs.CurveStartPoint(crv))
return arrPoints
def isVertical(crv,tolerance=0.0001):
start=rs.CurveStartPoint(c)
end=rs.CurveEndPoint(c)
# if abs(start[2]-end[2])<tolerance: hor_crvs.append(c)
if abs(start[1]-end[1])<tolerance and abs(start[0]-end[0])<tolerance:
return True
return False
def crackpolygon(pls, count):
temppls = pls
pls = []
if count == 0:
return 1
else:
for pl in temppls:
if rs.CloseCurve(pl) == False:
print
"Not a closed curve"
else:
# print "Cool"
centroid = rs.CurveAreaCentroid(pl)
centpt = rs.AddPoint(centroid[0])
curves = rs.ExplodeCurves(pl)
for crv in curves:
# print crv
pt1 = rs.CurveStartPoint(crv)
pt2 = rs.CurveEndPoint(crv)
pts = []
pts.append(pt1)
pts.append(pt2)
pts.append(centpt)
pts.append(pt1)
newpl = rs.AddPolyline(pts)
pls.append(newpl)
rs.DeleteObject(crv)
cleanup = []
cleanup.append(centpt)
# cleanup.append(curves)
rs.DeleteObjects(cleanup)
count = count - 1
return crackpolygon(pls, count)
def getExtendedCrv(self, crvList, dist=50, layer_height=2.5, vecMul=.66):
segmentCount = int(math.floor(dist / layer_height)) - 1
tmpList = []
fullHeight = []
for i in range(len(crvList)):
extendedCrv = rs.ExtendCurveLength(crvList[i], 2, 0, dist)
fullHeight.append(extendedCrv)
domStart, domEnd = rs.CurveDomain(extendedCrv)
trimmedCrv = rs.TrimCurve(extendedCrv, (domStart, 0))
tmpList.append(trimmedCrv)
tmp = []
###Smooth Curves###
for i in range(len(tmpList)):
bottomPt = rs.CurveEndPoint(tmpList[i])
zVec = rs.VectorAdd((0, 0, 0), (0, 0, dist))
topPt = rs.CopyObject(bottomPt, zVec)
line = rs.AddLine(bottomPt, topPt)
crvPts = rs.DivideCurve(tmpList[i], segmentCount)
LinePts = rs.DivideCurve(line, segmentCount)
for i in range(segmentCount):
tmpVec = rs.VectorCreate(LinePts[segmentCount - i - 1],
crvPts[i])
tmpVec = rs.VectorScale(tmpVec, vecMul)
rs.MoveObject(crvPts[i], tmpVec)
tmp.append(rs.AddInterpCurve(crvPts))
result = []
for crv in tmp:
crvLen = rs.CurveLength(crv)
if crvLen < dist:
tmpExt = dist - crvLen
result.append(rs.ExtendCurveLength(crv, 2, 0, tmpExt))
else:
result.append(rs.CopyObject(crv))
return result
def export_curdatapoints():
object_id = rs.GetObject("Select curve", rs.filter.curve)
if( object_id==None ): return
#Get the filename to create
filter = "Text File (*.shf)|*.shf|All Files (*.*)|*.*||"
filename = rs.SaveFileName("Save point coordinates as", filter)
if( filename==None ): return
if rs.IsCurveClosed(object_id):
start_point = rs.GetPoint("Base point of center line")
end_point = rs.GetPoint("Endpoint of center line", start_point)
points = rs.CurveContourPoints(object_id, start_point, end_point)
else:
points = rs.CurveContourPoints(object_id,rs.CurveStartPoint(object_id),rs.CurveEndPoint(object_id))
if not points: return
file = open( filename, "w" )
for pt in points:
print(str(pt.X)+","+str(pt.Y)+","+str(pt.Z))
file.write( str(pt.X) )
file.write( ", " )
file.write( str(pt.Y) )
file.write( ", " )
file.write( str(pt.Z) )
file.write( "\n" )
file.close()
def add_sharp_edges(polys, points, sharp_edges):
fixed_nodes = []
if sharp_edges:
for edge in sharp_edges:
pt1, pt2 = rs.CurveStartPoint(edge), rs.CurveEndPoint(edge)
index1 = str(rs.PointArrayClosestPoint(points, pt1))
index2 = str(rs.PointArrayClosestPoint(points, pt2))
flag1 = False
flag2 = False
for key in polys:
indices = polys[key]['indices']
for i, index in enumerate(indices):
if index == index1:
if flag1:
#rs.AddTextDot(index,points[int(index)])
points.append(points[int(index)])
indices[i] = str(len(points) - 1)
flag1 = True
if index == index2:
if flag2:
#rs.AddTextDot(index,points[int(index)])
points.append(points[int(index)])
indices[i] = str(len(points) - 1)
flag2 = True
polys[key]['indices'] = indices
return polys, points
def connectEndpoints(crvs):
points = getAllEndPoints(crvs)
for crv in crvs:
point = rs.CurveEndPoint(crv)
connectClosestPoint(point, points)
point = rs.CurveStartPoint(crv)
connectClosestPoint(point, points)
def writeArc(curve):
normal = rs.CurveTangent(curve, 0)
# get curvepoints
startpt = rs.CurveStartPoint(curve)
endpt = rs.CurveEndPoint(curve)
midpt = rs.ArcCenterPoint(curve)
# calc G2/G3 parameters
x = endpt.X
y = endpt.Y
i = -startpt.X + midpt.X
j = -startpt.Y + midpt.Y
# make a distinction between positive and negative direction
if ((normal[1] > 0) and (startpt.X > midpt.X)) or (
(normal[1] < 0) and (startpt.X < midpt.X) or
(normal[1] == 0 and
(normal[0] == 1 or normal[0] == -1) and startpt.X == midpt.X)):
file.write("G03 X%0.4f" % x + " Y%0.4f" % y + " I%0.4f" % i +
" J%0.4f" % j + "\n")
else:
file.write("G02 X%0.4f" % x + " Y%0.4f" % y + " I%0.4f" % i +
" J%0.4f" % j + "\n")
def divideSrfToPattern(srf, facadeType):
top, bot, verts = getSrfTopBotVertCrvs(srf)
if bot is None:
print('bot is None exit')
return None
if not rs.IsCurve(bot):
print('bot is not Curve exit')
return None
if len(verts) < 1:
print('len(verts)<1')
return None
if not rs.IsCurve(verts[0]):
print('verts[0] is not a curve')
return None
p0 = rs.CurveStartPoint(verts[0])
p1 = rs.CurveEndPoint(verts[0])
if p1[2] > p0[2]: vect = p1 - p0
else: vect = p0 - p1
print(vect)
rs.EnableRedraw(False)
m = meshExtrudeCrvToPattern(bot, facadeType, vect)
rs.DeleteObjects([top, bot])
rs.DeleteObjects(verts)
rs.EnableRedraw(True)
return m
def SillHeight():
# Find mid point of sill line
midpointSill = rs.CurveMidPoint(window_sillLine[1])
#midpointSill = rs.AddPoint(midpointSill)
# Find closest point in curve
parameterSill = rs.CurveClosestPoint(window_sillLine[1], midpointSill)
# Find curve Tangent
sill_Tangent = rs.CurveTangent(window_sillLine[1], parameterSill)
# find normal plane
sill_plane = rs.PlaneFromNormal(midpointSill, sill_Tangent)
# find start and end points of ground line
points_gl = []
start_gl = rs.CurveStartPoint(groundLine[1])
end_gl = rs.CurveEndPoint(groundLine[1])
points_gl.append(start_gl)
points_gl.append(end_gl)
#find point on ground line
pointGroundLine = rs.LinePlaneIntersection(points_gl, sill_plane)
#pointGroundLine = rs.AddPoint(pointGroundLine)
sill_Height = rs.Distance(midpointSill, pointGroundLine)
return sill_Height
def depressCrvs(srf, crvs, paths, startPt, radius, sd):
newCrvs = []
for i in range(len(crvs)):
divPts = rs.DivideCurve(crvs[i], 400)
for j in range(len(divPts)):
path = rs.PointClosestObject(divPts[j], paths)[0]
param = rs.CurveClosestPoint(path, divPts[j])
close = rs.EvaluateCurve(path, param)
srfParam = rs.SurfaceClosestPoint(srf, close)
vec = rs.SurfaceNormal(srf, srfParam)
dist = rs.Distance(close, divPts[j])
vec = rs.VectorUnitize(vec)
border = 1
entry = 1
if j > len(divPts) / 2:
border = rs.Distance(rs.CurveEndPoint(crvs[i]), divPts[j])
else:
border = rs.Distance(rs.CurveStartPoint(crvs[i]), divPts[j])
if border < sd * 3:
border = border / (sd * 3)
else:
border = 1
entryDist = rs.Distance(startPt, divPts[j])
if entryDist < sd * 10:
entry = entryDist / (sd * 10)
else:
entry = 1
if dist < sd * 2:
val = radius * (bellCrv(dist, sd))
divPts[j] = rs.PointAdd(divPts[j], vec * val * border * entry)
newCrvs.append(rs.AddCurve(divPts))
return divPts
def main():
print 'test'
objs = rs.GetObjects()
vec_x = [10,0,0]
# restore viewport Cplane
p1 = rs.WorldXYPlane()
rs.ViewCPlane(None, p1)
for obj in objs:
if rs.IsBlockInstance(obj) and rs.BlockInstanceName(strObject):
xform1 = rs.BlockInstanceXform(obj)
crv = rs.AddCurve([ [0,0,0], [0,300,0] ])
xfrom1_inv = rs.TransformObject( crv, (xform1) )
rs.SelectObject(crv)
vec1 = rs.CurveEndPoint(crv) - rs.CurveStartPoint(crv)
print vec1, math.degrees(calcAngle(vec1, vec_x))
if __name__ == "__main__":
main();
def createAirplane():
#CREATE FUSELAGE
rectangleFuselage = rs.AddRectangle(rs.WorldXYPlane(), Fw, Fh)
endPointsF = rs.PolylineVertices(rectangleFuselage)
fPtsB = offsetPoints(Fpb, endPointsF[0], endPointsF[1])
fPtsR = offsetPoints(Fpr, endPointsF[1], endPointsF[2])
fPtsT = offsetPoints(Fpt, endPointsF[2], endPointsF[3])
fPtsL = offsetPoints(Fpl, endPointsF[3], endPointsF[0])
fPtsL.append(fPtsB[0])
fCurveOpen = rs.AddCurve(fPtsB + fPtsR + fPtsT + fPtsL, 2)
#CREATE WING SLOT
wingSlotStart = rs.VectorAdd(endPointsF[0], (Fwx, Fwy, 0))
wingSlotEnd = rs.VectorAdd(wingSlotStart,
(Fw - Fwx + maxPointOffset * 2, 0, 0))
wingSlot = rs.AddLine(wingSlotStart, wingSlotEnd)
wingSlotOffset = rs.OffsetCurve(wingSlot, (0, 1, 0), 1 / 32)
rs.AddLine(rs.CurveStartPoint(wingSlot),
rs.CurveStartPoint(wingSlotOffset))
#CREATE WING
wPlaneOffY = Wh + 1
wPlaneOffX = Fw / 2
wingPlane = rs.MovePlane(rs.WorldXYPlane(), (wPlaneOffX, -wPlaneOffY, 0))
rectangleWing = rs.AddRectangle(wingPlane, Ww, Wh)
endPointsW = rs.PolylineVertices(rectangleWing)
wPtsB = offsetPoints(Wpb, endPointsW[0], endPointsW[1])
wPtsR = offsetPoints(Wps, endPointsW[1], endPointsW[2])
wPtsT = offsetPoints(Wpt, endPointsW[2], endPointsW[3])
wPtsT.append(endPointsW[3])
wPtsB.insert(0, endPointsW[0])
wingCurve = rs.AddCurve(wPtsB + wPtsR + wPtsT)
#wingLine = rs.AddLine(endPointsW[3],endPointsW[0])
rs.MirrorObject(wingCurve, endPointsW[3], endPointsW[0], True)
#CREATE WING GROOVE
wingGrooveStart = rs.VectorAdd(endPointsW[3], (-1 / 64, maxPointOffset, 0))
wingGrooveEnd = rs.VectorAdd(wingGrooveStart,
(0, -(maxPointOffset + Wh * Wsd), 0))
wingGroove = rs.AddLine(wingGrooveStart, wingGrooveEnd)
wingGrooveOffset = rs.OffsetCurve(wingGroove, (1, 0, 0), -1 / 32)
rs.AddLine(rs.CurveEndPoint(wingGroove),
rs.CurveEndPoint(wingGrooveOffset))
#DELETE RECTANGLES
rs.DeleteObject(rectangleFuselage)
rs.DeleteObject(rectangleWing)
