def getExtendedCrv(self, crvList, dist=50, layer_height=2.5, vecMul=.66):
segmentCount = int(math.floor(dist / layer_height)) - 1
tmpList = []
fullHeight = []
for i in range(len(crvList)):
extendedCrv = rs.ExtendCurveLength(crvList[i], 2, 0, dist)
fullHeight.append(extendedCrv)
domStart, domEnd = rs.CurveDomain(extendedCrv)
trimmedCrv = rs.TrimCurve(extendedCrv, (domStart, 0))
tmpList.append(trimmedCrv)
tmp = []
###Smooth Curves###
for i in range(len(tmpList)):
bottomPt = rs.CurveEndPoint(tmpList[i])
zVec = rs.VectorAdd((0, 0, 0), (0, 0, dist))
topPt = rs.CopyObject(bottomPt, zVec)
line = rs.AddLine(bottomPt, topPt)
crvPts = rs.DivideCurve(tmpList[i], segmentCount)
LinePts = rs.DivideCurve(line, segmentCount)
for i in range(segmentCount):
tmpVec = rs.VectorCreate(LinePts[segmentCount - i - 1],
crvPts[i])
tmpVec = rs.VectorScale(tmpVec, vecMul)
rs.MoveObject(crvPts[i], tmpVec)
tmp.append(rs.AddInterpCurve(crvPts))
result = []
for crv in tmp:
crvLen = rs.CurveLength(crv)
if crvLen < dist:
tmpExt = dist - crvLen
result.append(rs.ExtendCurveLength(crv, 2, 0, tmpExt))
else:
result.append(rs.CopyObject(crv))
return result
def HorizontalLines():
#Course = rs.OffsetCurve(,bbox[3],sill_remain)
Surf_Height = rs.Distance(bbox[0], bbox[3])
#number of horizontal cources
hori_no = Surf_Height / ipHeight
#convert to intiger
hori_no = int(hori_no)
Course_All = []
Course = rs.AddLine(bbox[0], bbox[1])
Course_start = rs.ExtendCurveLength(Course, 0, 0, ipThick)
Course_end = rs.ExtendCurveLength(Course, 0, 1, ipThick)
Course = rs.JoinCurves((Course_start, Course, Course_end), True)
Course1 = Course
Course_All.append(Course)
for index in range(0, hori_no, 1):
Course = rs.OffsetCurve(Course, bbox[3], ipHeight)
Course_All.append(Course)
Course = rs.OffsetCurve(Course1, bbox[3], Surf_Height)
Course_All.append(Course)
rs.ObjectColor(Course_All, [255, 0, 0])
return Course_All
def extrude_solid(pt, cp, b):
# int_solid: (listof pt) pt curve -> (listof solid)
lo_solid = []
ptlst = rs.CurvePoints(b)
srf = rs.AddPlanarSrf(rs.AddCurve(ptlst, 1))
# make curve and extrude
line = rs.AddCurve([cp, pt], 1)
max = get_max_side(b)
curve = rs.ExtendCurveLength(line, 0, 1, max * 40)
#extrude surface
brep = rs.coercebrep(srf, True)
curve = rs.coercecurve(curve, -1, True)
newbrep = brep.Faces[0].CreateExtrusion(curve, True)
if newbrep:
rc = sc.doc.Objects.AddBrep(newbrep)
sc.doc.Views.Redraw()
return rc
def unfilletCurve(curve):
rs.EnableRedraw(False)
curLay = rs.CurrentLayer()
childrenLay = rs.LayerChildren(curLay)
cutCrvs = []
contours = []
finalLines = []
finalLineSegs = []
tempCrv = curve
if tempCrv is not None:
cutCrvs.append(tempCrv)
for crv in cutCrvs:
contours.append(ghcomp.Explode(crv, True)[0])
for contour in contours:
for i in range(0, len(contour)):
if rs.IsLine(contour[i]):
finalLines.append(sc.doc.Objects.AddCurve(contour[i]))
finalPts = []
for line in finalLines:
rs.ExtendCurveLength(line, 0, 2, 300)
for i in range(0, len(finalLines) - 1):
tempPt = rs.CurveCurveIntersection(finalLines[i], finalLines[i + 1])
finalPts.append(rs.AddPoint(rs.coerce3dpoint(tempPt[0][1])))
tempPt = rs.CurveCurveIntersection(finalLines[-1], finalLines[0])
finalPts.append(rs.AddPoint(rs.coerce3dpoint(tempPt[0][1])))
for i in range(0, len(finalPts) - 1):
finalLineSegs.append(rs.AddLine(finalPts[i], finalPts[i + 1]))
finalLineSegs.append(rs.AddLine(finalPts[-1], finalPts[0]))
lastCrv = rs.JoinCurves(finalLineSegs, True)
sc.doc.Views.Redraw()
rs.DeleteObjects(finalPts)
rs.DeleteObjects(finalLines)
rs.DeleteObject(tempCrv)
rs.DeleteObjects(cutCrvs)
rs.EnableRedraw(True)
rs.SelectObject(lastCrv)
def outline_region():
go = Rhino.Input.Custom.GetObject()
go.GeometryFilter = Rhino.DocObjects.ObjectType.Curve
default_length = sc.sticky["length"] if sc.sticky.has_key("length") else 100
default_delete = sc.sticky["delete"] if sc.sticky.has_key("delete") else True
opt_delete = Rhino.Input.Custom.OptionToggle(default_delete,"No","Yes")
go.SetCommandPrompt("Select Curves")
go.AddOptionToggle("DeleteInput", opt_delete)
go.GroupSelect = True
go.SubObjectSelect = False
go.AcceptEnterWhenDone(True)
go.AcceptNothing(True)
go.EnableClearObjectsOnEntry(False)
go.GroupSelect = True
go.SubObjectSelect = False
go.DeselectAllBeforePostSelect = False
res = None
bHavePreselectedObjects = False
while True:
res = go.GetMultiple(1,0)
if res == Rhino.Input.GetResult.Option:
#print res
go.EnablePreSelect(False, True)
continue
#If not correct
elif res != Rhino.Input.GetResult.Object:
print "No curves selected!"
return Rhino.Commands.Result.Cancel
if go.ObjectsWerePreselected:
bHavePreselectedObjects = True
go.EnablePreSelect(False, True)
continue
break
input_curves = []
for i in xrange(go.ObjectCount):
b_obj = go.Object(i).Object()
input_curves.append(b_obj.Id)
#Get length
extension_length = rs.GetInteger(message="Enter Extension Length",number=default_length)
if not extension_length:
rs.EnableRedraw(True)
print "No Extension Length entered."
return False
arr_preview_geom = get_preview_geometry(input_curves)
for indCrv in arr_preview_geom:
rs.ExtendCurveLength(indCrv,0,2,extension_length)
rs.EnableRedraw(False)
#Get curveboolean and display it
region_was_created = True
rs.UnselectAllObjects()
rs.SelectObjects(arr_preview_geom)
rs.Command("_-CurveBoolean _AllRegions _Enter")
pcurve_outline = rs.LastCreatedObjects()
if isinstance(pcurve_outline,list):
preview_srf = rs.AddPlanarSrf(pcurve_outline)
rs.LockObjects(arr_preview_geom)
rs.LockObjects(preview_srf)
else:
region_was_created = False
rs.LockObjects(arr_preview_geom)
preview_srf = []
rs.EnableRedraw(True)
rs.Redraw()
#Set up input object
go = Rhino.Input.Custom.GetOption()
optint = Rhino.Input.Custom.OptionDouble(extension_length)
prompt = "Press Enter to accept"
warning = "Insufficient overlap length. "
s = prompt if region_was_created else warning+prompt
go.SetCommandPrompt(s)
go.AddOptionDouble("ExtensionLength", optint)
go.AddOptionToggle("DeleteInput", opt_delete)
go.AcceptEnterWhenDone(True)
go.AcceptNothing(True)
#control flow: can distinguish between inserting an option, cancelling, and pressing enter
res = None
while True:
res = go.Get()
rs.EnableRedraw(False)
region_was_created = True
#If new option entered, redraw a possible result
if res == Rhino.Input.GetResult.Option:
#Delete old preview
rs.UnlockObjects(preview_srf+arr_preview_geom)
rs.DeleteObjects(preview_srf+arr_preview_geom)
if isinstance(pcurve_outline,list):
rs.DeleteObjects(pcurve_outline)
rs.SelectObjects(input_curves)
#Draw new preview
arr_preview_geom = get_preview_geometry(input_curves)
if not extension_length: return False
for indCrv in arr_preview_geom:
rs.ExtendCurveLength(indCrv,0,2,optint.CurrentValue)
rs.UnselectAllObjects()
rs.SelectObjects(arr_preview_geom)
rs.Command("_-CurveBoolean _AllRegions _Enter")
pcurve_outline = rs.LastCreatedObjects()
if isinstance(pcurve_outline,list):
preview_srf = rs.AddPlanarSrf(pcurve_outline)
rs.LockObjects(arr_preview_geom)
rs.LockObjects(preview_srf)
else:
rs.LockObjects(arr_preview_geom)
preview_srf = []
region_was_created = False
rs.EnableRedraw(True)
s = prompt if region_was_created else warning+prompt
go.SetCommandPrompt(s)
continue
#If accepted, leave loop
elif res == Rhino.Input.GetResult.Nothing:
break
#If cancelled, delete working geometry
elif res != Rhino.Input.GetResult.Option:
rs.UnlockObjects(preview_srf)
rs.UnlockObjects(arr_preview_geom)
rs.DeleteObjects(preview_srf)
rs.DeleteObjects(arr_preview_geom)
rs.DeleteObjects(pcurve_outline)
rs.EnableRedraw(True)
return Rhino.Commands.Result.Cancel
#Clean up if successful
if opt_delete.CurrentValue == True: rs.DeleteObjects(input_curves)
rs.UnlockObjects(preview_srf)
rs.UnlockObjects(arr_preview_geom)
rs.DeleteObjects(preview_srf)
rs.DeleteObjects(arr_preview_geom)
if isinstance(pcurve_outline,list):
rs.SelectObjects(pcurve_outline)
sc.sticky["length"] = optint.CurrentValue
sc.sticky["delete"] = opt_delete.CurrentValue
rs.EnableRedraw(True)
#start建立基本结构线
basicpoint = rs.GetPoint("pick one point") #1.拾取一个点
matrix = rs.XformTranslation((80, 0, 0)) #建立用于移动的矩阵
mbpoint = rs.PointTransform(basicpoint, matrix) #根据建立的矩阵移动点
basicline = rs.AddLine(basicpoint, mbpoint) #2.建立一条直线
offsetdistance = 10
offsetlineA = rs.OffsetCurve(basicline, [0, 0, 0], offsetdistance,
[0, 0, 1]) #3.偏移复制直线
offsetlineB = rs.OffsetCurve(basicline, [0, 0, 0], -offsetdistance, [0, 0, 1])
#调整结构线，使用提取点移动
extendvalue = 2 #中间直线延长的距离
extendline = rs.ExtendCurveLength(basicline, 0, 2, extendvalue) #4.延长中间直线
startpoint = rs.CurveStartPoint(extendline) #5.拾取两侧端点
endpoint = rs.CurveEndPoint(extendline)
midpoint = rs.CurveMidPoint(extendline)
heightA = 10
heightB = 18
matrixstartend = rs.XformTranslation((0, 0, heightA)) #建立端点移动矩阵
matrixmid = rs.XformTranslation((0, 0, heightB)) #建立中间点移动矩阵
mstartpoint = rs.PointTransform(startpoint, matrixstartend) #根据矩阵移动开始点
mendpoint = rs.PointTransform(endpoint, matrixstartend) #移动结束点
mmidpoint = rs.PointTransform(midpoint, matrixmid) #移动中心点
#整理变量到列表
def Main():
rectangle = rs.GetObject(
"Select rectangle to create mortise and tenon from", rs.filter.curve,
True, True)
if rs.IsCurveClosed(rectangle):
x = 0
else:
print "Failed....Curve must be closed and rectangular"
return
if rs.IsCurvePlanar(rectangle):
x = 0
else:
print "Failed....Curve must be planar"
return
lines = rs.ExplodeCurves(rectangle)
count = 0
for line in lines:
count = count + 1
if count != 4:
print "Failed....To many line segments, redraw rectangle"
return
if rs.IsLine(lines[0]):
x = 0
else:
print "Failed....Curve must be rectangular"
return
if rs.IsLine(lines[1]):
x = 0
else:
print "Failed....Curve must be rectangular"
return
if rs.IsLine(lines[2]):
x = 0
else:
print "Failed....Curve must be rectangular"
return
if rs.IsLine(lines[3]):
x = 0
else:
print "Failed....Curve must be rectangular"
return
face = rs.GetObject("Select tenon surface", rs.filter.surface, False, True,
None, True)
length = rs.GetReal("Enter tenon length", number=None)
if length and length != 0:
x = 0
else:
print "Failed....No length was entered"
return
depth = rs.GetReal("Enter mortise depth", number=length + 0.05)
if depth and depth != 0:
x = 0
else:
print "Failed....No depth was entered"
return
fit = rs.GetReal("Enter mortise fit", number=0.01)
line1 = rs.AddLine(rs.CurveStartPoint(lines[0]),
rs.CurveEndPoint(lines[0]))
line2 = rs.AddLine(rs.CurveStartPoint(lines[1]),
rs.CurveEndPoint(lines[1]))
line3 = rs.AddLine(rs.CurveStartPoint(lines[2]),
rs.CurveEndPoint(lines[2]))
line4 = rs.AddLine(rs.CurveStartPoint(lines[3]),
rs.CurveEndPoint(lines[3]))
rs.DeleteObjects(lines)
lines = line1, line2, line3, line4
if rs.CurveLength(lines[0]) > rs.CurveLength(lines[1]):
smallside = rs.CurveLength(lines[1])
longside1 = lines[0]
longside2 = lines[2]
else:
smallside = rs.CurveLength(lines[0])
longside1 = lines[1]
longside2 = lines[3]
filletRadius = smallside / 2
fillet1 = rs.CurveFilletPoints(lines[0], lines[1])
fillet2 = rs.CurveFilletPoints(lines[1], lines[2])
fillet3 = rs.CurveFilletPoints(lines[2], lines[3])
fillet4 = rs.CurveFilletPoints(lines[3], lines[0])
arc1 = rs.AddFilletCurve(lines[0], lines[1], radius=filletRadius)
arc2 = rs.AddFilletCurve(lines[1], lines[2], radius=filletRadius)
arc3 = rs.AddFilletCurve(lines[2], lines[3], radius=filletRadius)
arc4 = rs.AddFilletCurve(lines[3], lines[0], radius=filletRadius)
arcs = arc1, arc2, arc3, arc4
arcs = rs.JoinCurves(arcs)
arcEnd1 = rs.CurveEndPoint(arcs[0])
arcStart1 = rs.CurveStartPoint(arcs[0])
arcEnd2 = rs.CurveEndPoint(arcs[1])
arcStart2 = rs.CurveStartPoint(arcs[1])
if rs.Distance(arcEnd1, arcEnd2) > rs.Distance(arcEnd1, arcStart2):
temp = arcEnd2
arcEnd2 = arcStart2
arcStart2 = temp
line1 = rs.AddLine(arcEnd1, arcEnd2)
line2 = rs.AddLine(arcStart1, arcStart2)
curves = line1, arcs[0], arcs[1], line2
tenonOut = rs.JoinCurves(curves)
tenonSurf = rs.AddPlanarSrf(tenonOut)
point = rs.SurfacePoints(face)
param = rs.SurfaceClosestPoint(face, point[0])
normal = rs.SurfaceNormal(face, param)
normal = normal * length
vect = rs.AddLine(arcEnd1, arcEnd1 + normal)
tenon = rs.ExtrudeSurface(tenonSurf, vect, cap=True)
rs.DeleteObjects(curves)
arcs = arc1, arc2, arc3, arc4
rs.DeleteObjects(arcs)
rs.DeleteObject(rectangle)
rs.ExtendCurveLength(longside1, 0, 0, fit)
rs.ExtendCurveLength(longside1, 0, 1, fit)
rs.ExtendCurveLength(longside2, 0, 0, fit)
rs.ExtendCurveLength(longside2, 0, 1, fit)
if rs.Distance(rs.CurveEndPoint(longside1),
rs.CurveEndPoint(longside2)) < rs.Distance(
rs.CurveStartPoint(longside1),
rs.CurveEndPoint(longside2)):
line1Start = rs.CurveEndPoint(longside1)
line1End = rs.CurveEndPoint(longside2)
line2Start = rs.CurveStartPoint(longside1)
line2End = rs.CurveStartPoint(longside2)
else:
line1Start = rs.CurveStartPoint(longside1)
line1End = rs.CurveEndPoint(longside2)
line2Start = rs.CurveEndPoint(longside1)
line2End = rs.CurveStartPoint(longside2)
shortside1 = rs.AddLine(line1Start, line1End)
shortside2 = rs.AddLine(line2Start, line2End)
arc1 = rs.AddFilletCurve(longside1, shortside1, radius=filletRadius)
arc2 = rs.AddFilletCurve(shortside1, longside2, radius=filletRadius)
arc3 = rs.AddFilletCurve(longside2, shortside2, radius=filletRadius)
arc4 = rs.AddFilletCurve(shortside2, longside1, radius=filletRadius)
arcs = arc1, arc2, arc3, arc4
arcs = rs.JoinCurves(arcs)
arcEnd1 = rs.CurveEndPoint(arcs[0])
arcStart1 = rs.CurveStartPoint(arcs[0])
arcEnd2 = rs.CurveEndPoint(arcs[1])
arcStart2 = rs.CurveStartPoint(arcs[1])
if rs.Distance(arcEnd1, arcEnd2) > rs.Distance(arcEnd1, arcStart2):
temp = arcEnd2
arcEnd2 = arcStart2
arcStart2 = temp
line1 = rs.AddLine(arcEnd1, arcEnd2)
line2 = rs.AddLine(arcStart1, arcStart2)
curves = line1, arcs[0], arcs[1], line2
mortiseOut = rs.JoinCurves(curves)
mortiseSurf = rs.AddPlanarSrf(mortiseOut)
param = rs.SurfaceClosestPoint(face, point[0])
normal = rs.SurfaceNormal(face, param)
normal = normal * depth
vect = rs.AddLine(arcEnd1, arcEnd1 + normal)
mortise = rs.ExtrudeSurface(mortiseSurf, vect, cap=True)
rs.DeleteObject(shortside1)
rs.DeleteObject(shortside2)
rs.DeleteObject(mortiseOut)
rs.DeleteObject(mortiseSurf)
rs.DeleteObjects(curves)
rs.DeleteObjects(lines)
arcs = arc1, arc2, arc3, arc4
rs.DeleteObjects(arcs)
rs.DeleteObject(rectangle)
rs.DeleteObject(tenonOut)
rs.DeleteObject(tenonSurf)
return
def drilling(curve_list, surface1, used_line2, unused_line, closest_p):
split_num = 4
point_list = []
if not curve_list:
# print("tan2: There is not curve")
return
if len(curve_list) != 1:
cur_length = []
length = 0
# Message: unable to convert 0530c598-26e0-4ff5-a15a-389bd334aeff into Curve geometry
for i in range(0, len(curve_list)):
if rs.IsCurve(curve_list[i]):
length = rs.CurveLength(curve_list[i])
cur_length.append(length)
curve_index = cur_length.index(max(cur_length))
curve = curve_list[curve_index]
else:
curve = curve_list
domain = rs.CurveDomain(curve)
t = (domain[1] - domain[0]) / split_num
for i in range(0, 4):
dt = t * i
point = rs.EvaluateCurve(curve, dt)
point_list.append(point)
# 直線の交点を求める
line1 = rs.AddLine(point_list[0], point_list[2])
line2 = rs.AddLine(point_list[1], point_list[3])
vec1 = rs.VectorCreate(point_list[2], point_list[0])
vec2 = rs.VectorCreate(point_list[3], point_list[1])
cross = rs.VectorCrossProduct(vec1, vec2)
normal = rs.VectorUnitize(cross)
curveOnsurface1 = rs.ProjectCurveToSurface(line1, surface1, normal)
curveOnsurface2 = rs.ProjectCurveToSurface(line2, surface1, normal)
if len(curveOnsurface1) == 0: # ttm add プロジェクションされていない可能性があるため
new_vec1 = rs.VectorReverse(normal)
curveOnsurface1 = rs.ProjectCurveToSurface(line1, surface1, new_vec1)
if len(curveOnsurface2) == 0: # ttm add プロジェクションされていない可能性があるため
new_vec2 = rs.VectorReverse(normal)
curveOnsurface2 = rs.ProjectCurveToSurface(line2, surface1, new_vec2)
if len(curveOnsurface1) == 2 and len(curveOnsurface2) == 2:
intersection1 = rs.CurveCurveIntersection(curveOnsurface1[0],
curveOnsurface2[0])
intersection2 = rs.CurveCurveIntersection(curveOnsurface1[1],
curveOnsurface2[1])
# 条件分岐
if intersection1 is None:
intersection1 = rs.CurveCurveIntersection(curveOnsurface1[0],
line2)
if intersection1 is None:
intersection1 = rs.CurveCurveIntersection(
curveOnsurface2[0], line1)
if intersection1 is None:
intersection1 = rs.CurveCurveIntersection(
curveOnsurface1[1], line2)
if intersection1 is None:
intersection1 = rs.CurveCurveIntersection(
curveOnsurface2[1], line1)
if intersection1 is None:
intersection1 = rs.CurveCurveIntersection(
curveOnsurface1[0], curveOnsurface2[1])
intersection2 = rs.CurveCurveIntersection(
curveOnsurface1[1], curveOnsurface2[0])
else:
# normal_reverce = rs.VectorReverse(normal)
# curveOnsurface1 = rs.ProjectCurveToSurface(line1, surface1, normal)
# curveOnsurface2 = rs.ProjectCurveToSurface(line2, surface1, normal)
intersection1 = rs.CurveCurveIntersection(
curveOnsurface1[0], curveOnsurface2[0]) #index out of range: 0
intersection2 = None
# console
# print("intersection1: %s" % (intersection1))
# print("intersection2: %s" % (intersection2))
if intersection1 is None and intersection2 is None:
center_point = rs.CurveMidPoint(curveOnsurface1[0])
elif intersection2 is None:
center_point = intersection1[0][1]
else:
center_point1 = intersection1[0][1]
center_point2 = intersection2[0][1]
dis1 = rs.Distance(center_point1, closest_p)
dis2 = rs.Distance(center_point2, closest_p)
if dis1 > dis2:
center_point = center_point2
else:
center_point = center_point1
parameter1 = rs.CurveClosestPoint(unused_line, center_point)
parameter2 = rs.CurveClosestPoint(used_line2, center_point)
point1 = rs.EvaluateCurve(unused_line, parameter1) # base point
point2 = rs.EvaluateCurve(used_line2, parameter2) # base point
# ドリル穴のベクトルを生成
drill_line = rs.AddLine(point1, point2)
rs.CurveArrows(drill_line, 2)
rs.ExtendCurveLength(drill_line, 0, 2, 100)
drill_vec = rs.VectorCreate(point2, point1)
# 外積計算より回転軸を生成
start_point = rs.CurveStartPoint(unused_line)
end_point = rs.CurveEndPoint(unused_line)
distance1 = rs.Distance(start_point, center_point)
distance2 = rs.Distance(end_point, center_point)
if distance1 > distance2:
select_point = end_point
else:
select_point = start_point
# 回転平面を定義する
origin_point = center_point
x_point = point1
y_point = select_point
new_plane = rs.PlaneFromPoints(origin_point, x_point, y_point)
rs.ViewCPlane(None, new_plane)
rotate_p = origin_point
vec1 = rs.VectorCreate(x_point, rotate_p)
vec2 = rs.VectorCreate(y_point, rotate_p)
cross = rs.VectorCrossProduct(vec1, vec2)
cross_unit = rs.VectorUnitize(cross)
rotate_vec = rs.VectorScale(
cross_unit, 100) # Message: Could not convert None to a Vector3d
# 描画
# new_rotate_axis = AddVector(center_point, rotate_vector)
# rotate_axis = AddVector(rotate_p, rotate_vec)
# rs.AddPoint(point1)
# rs.AddPoint(point2)
# rs.AddPoint(center_point)
# object削除
rs.DeleteObject(line1)
rs.DeleteObject(line2)
for i in range(0, len(curveOnsurface1)):
rs.DeleteObject(curveOnsurface1[i])
for i in range(0, len(curveOnsurface2)):
rs.DeleteObject(curveOnsurface2[i])
# 平面をもとのxy平面に戻す
origin_point = (0, 0, 0)
x_point = (100, 0, 0)
y_point = (0, 100, 0)
new_plane = rs.PlaneFromPoints(origin_point, x_point, y_point)
rs.ViewCPlane(None, new_plane)
# 戻り値(ドリルライン、ドリルベクトル、回転軸、回転軸点)
return drill_line, drill_vec, rotate_vec, center_point
def main():
rectangle = rs.GetObject("Select rectangle to create mortise and tenon from", rs.filter.curve, True, True)
errorCheck = curveErrorCheck(rectangle)
if errorCheck == True:
return
lines = rs.ExplodeCurves(rectangle)
errorCheck = lineErrorCheck(lines)
if errorCheck == True:
return
face = rs.GetObject("Select tenon surface", rs.filter.surface, False, True, None, True)
length = rs.GetReal("Enter tenon length", number=None)
if length and length != 0:
x = 0
else:
print "Failed....No length was entered"
return
depth = rs.GetReal("Enter mortise depth", number=length+0.05)
if depth and depth != 0:
x = 0
else:
print "Failed....No depth was entered"
return
fit = rs.GetReal("Enter mortise fit", number=0.01)
line1 = rs.AddLine(rs.CurveStartPoint(lines[0]),rs.CurveEndPoint(lines[0]))
line2 = rs.AddLine(rs.CurveStartPoint(lines[1]),rs.CurveEndPoint(lines[1]))
line3 = rs.AddLine(rs.CurveStartPoint(lines[2]),rs.CurveEndPoint(lines[2]))
line4 = rs.AddLine(rs.CurveStartPoint(lines[3]),rs.CurveEndPoint(lines[3]))
rs.DeleteObjects(lines)
lines = line1, line2, line3, line4
if rs.CurveLength(lines[0]) > rs.CurveLength(lines[1]):
smallside = rs.CurveLength(lines[1])
longside1 = lines[0]
longside2 = lines[2]
else:
smallside = rs.CurveLength(lines[0])
longside1 = lines[1]
longside2 = lines[3]
filletRadius = smallside/2
fillet1 = rs.CurveFilletPoints (lines[0], lines[1])
fillet2 = rs.CurveFilletPoints (lines[1], lines[2])
fillet3 = rs.CurveFilletPoints (lines[2], lines[3])
fillet4 = rs.CurveFilletPoints (lines[3], lines[0])
arc1 = rs.AddFilletCurve(lines[0],lines[1], radius = filletRadius)
arc2 = rs.AddFilletCurve(lines[1],lines[2], radius = filletRadius)
arc3 = rs.AddFilletCurve(lines[2],lines[3], radius = filletRadius)
arc4 = rs.AddFilletCurve(lines[3],lines[0], radius = filletRadius)
arcs = arc1, arc2, arc3, arc4
arcs = rs.JoinCurves(arcs)
arcEnd1 = rs.CurveEndPoint(arcs[0])
arcStart1 = rs.CurveStartPoint(arcs[0])
arcEnd2 = rs.CurveEndPoint(arcs[1])
arcStart2 = rs.CurveStartPoint(arcs[1])
if rs.Distance(arcEnd1, arcEnd2) > rs.Distance(arcEnd1,arcStart2):
temp = arcEnd2
arcEnd2 = arcStart2
arcStart2 = temp
line1 = rs.AddLine(arcEnd1, arcEnd2)
line2 = rs.AddLine(arcStart1, arcStart2)
curves = line1, arcs[0], arcs[1], line2
tenonOut = rs.JoinCurves(curves)
tenonSurf = rs.AddPlanarSrf(tenonOut)
point = rs.SurfacePoints(face)
param = rs.SurfaceClosestPoint(face, point[0])
normal = rs.SurfaceNormal(face, param)
normal = normal * length
vect = rs.AddLine( arcEnd1, arcEnd1 + normal )
tenon = rs.ExtrudeSurface(tenonSurf, vect, cap=True)
rs.DeleteObjects(curves)
arcs = arc1, arc2, arc3, arc4
rs.DeleteObjects(arcs)
rs.DeleteObject(rectangle)
rs.ExtendCurveLength(longside1, 0, 0, fit)
rs.ExtendCurveLength(longside1, 0, 1, fit)
rs.ExtendCurveLength(longside2, 0, 0, fit)
rs.ExtendCurveLength(longside2, 0, 1, fit)
if rs.Distance(rs.CurveEndPoint(longside1), rs.CurveEndPoint(longside2)) < rs.Distance(rs.CurveStartPoint(longside1), rs.CurveEndPoint(longside2)):
line1Start = rs.CurveEndPoint(longside1)
line1End = rs.CurveEndPoint(longside2)
line2Start = rs.CurveStartPoint(longside1)
line2End = rs.CurveStartPoint(longside2)
else:
line1Start = rs.CurveStartPoint(longside1)
line1End = rs.CurveEndPoint(longside2)
line2Start = rs.CurveEndPoint(longside1)
line2End = rs.CurveStartPoint(longside2)
shortside1 = rs.AddLine(line1Start, line1End)
shortside2 = rs.AddLine(line2Start, line2End)
arc1 = rs.AddFilletCurve(longside1, shortside1, radius = filletRadius)
arc2 = rs.AddFilletCurve(shortside1, longside2, radius = filletRadius)
arc3 = rs.AddFilletCurve(longside2, shortside2, radius = filletRadius)
arc4 = rs.AddFilletCurve(shortside2, longside1, radius = filletRadius)
arcs = arc1, arc2, arc3, arc4
arcs = rs.JoinCurves(arcs)
arcEnd1 = rs.CurveEndPoint(arcs[0])
arcStart1 = rs.CurveStartPoint(arcs[0])
arcEnd2 = rs.CurveEndPoint(arcs[1])
arcStart2 = rs.CurveStartPoint(arcs[1])
if rs.Distance(arcEnd1, arcEnd2) > rs.Distance(arcEnd1,arcStart2):
temp = arcEnd2
arcEnd2 = arcStart2
arcStart2 = temp
line1 = rs.AddLine(arcEnd1, arcEnd2)
line2 = rs.AddLine(arcStart1, arcStart2)
curves = line1, arcs[0], arcs[1], line2
mortiseOut = rs.JoinCurves(curves)
mortiseSurf = rs.AddPlanarSrf(mortiseOut)
param = rs.SurfaceClosestPoint(face, point[0])
normal = rs.SurfaceNormal(face, param)
normal = normal * depth
vect = rs.AddLine( arcEnd1, arcEnd1 + normal )
mortise = rs.ExtrudeSurface(mortiseSurf, vect, cap=True)
rs.DeleteObject(shortside1)
rs.DeleteObject(shortside2)
rs.DeleteObject(mortiseOut)
rs.DeleteObject(mortiseSurf)
rs.DeleteObjects(curves)
rs.DeleteObjects(lines)
arcs = arc1, arc2, arc3, arc4
rs.DeleteObjects(arcs)
rs.DeleteObject(rectangle)
rs.DeleteObject(tenonOut)
rs.DeleteObject(tenonSurf)
mortiseSide = rs.GetObject("Select part to mortise", rs.filter.polysurface, False, False)
tenonSide = rs.GetObject("Select part to tenon", rs.filter.polysurface, False, False)
tenonUnion = tenonSide, tenon
rs.BooleanDifference(mortiseSide, mortise, delete_input = True)
rs.BooleanUnion(tenonUnion, delete_input = True)
return
def create_bone(point, curve, length, width, radius, extend):
if not extend: extend = 0.001
curve_surface = rs.AddPlanarSrf(curve)
if not curve_surface:
exp_curves = rs.ExplodeCurves(curve)
curve_surface = rs.AddEdgeSrf(exp_curves)
rs.DeleteObjects(exp_curves)
print("Surface problem")
# circle = rs.AddCircle(rs.CurveAreaCentroid(curve)[0],10000)
# planar_surface = rs.AddPlanarSrf(circle)
# projected_curve = rs.ProjectCurveToSurface(curve,planar_surface,(0,0,-1))
# if not projected_curve: rs.ProjectCurveToSurface(curve,planar_surface,(0,0,1))
# if not projected_curve: print "noooooo"
# curve_surface = rs.AddPlanarSrf(projected_curve)
# rs.DeleteObjects([circle,planar_surface,curve])
# curve = rs.JoinCurves(rs.DuplicateEdgeCurves(curve_surface, select=False))
# if not curve_surface: print "WARNING"
main_point_param = rs.CurveClosestPoint(curve, point)
curve_normal = rs.CurveNormal(curve)
curve_plane = rs.CurvePlane(curve)
tangent = rs.CurveTangent(curve, main_point_param)
center_curve = rs.AddLine((0, 0, 0), rs.VectorScale(tangent, length))
rs.RotateObject(center_curve, (0, 0, 0), 90, curve_normal)
rs.MoveObject(center_curve, rs.VectorCreate(point, (0, 0, 0)))
if not rs.IsPointOnSurface(curve_surface, rs.CurveEndPoint(center_curve)):
rs.RotateObject(center_curve, point, 180, curve_normal)
normal = rs.VectorScale(tangent, 10000)
normal_inverted = rs.VectorReverse(normal)
side_curve = rs.OffsetCurveOnSurface(center_curve, curve_surface,
width / 2)
if not side_curve:
side_curve = rs.OffsetCurveOnSurface(center_curve, curve_surface,
-width / 2)
side_curves = [
side_curve,
rs.RotateObject(
side_curve, rs.CurveMidPoint(center_curve), 180,
rs.VectorCreate(rs.CurveStartPoint(center_curve),
rs.CurveEndPoint(center_curve)), True)
]
#side_curves = [side_curve,rs.MirrorObject(side_curve,rs.CurveStartPoint(center_curve),rs.CurveEndPoint(center_curve), True)]
#side_curves = [rs.OffsetCurveOnSurface(center_curve,curve_surface, width/2),rs.OffsetCurveOnSurface(center_curve,curve_surface, -width/2)]
for side_curve in side_curves:
rs.ExtendCurveLength(side_curve, 0, 0, 2)
rs.ObjectColor(side_curve, (255, 0, 0))
perimeter_curve = rs.AddCurve([
rs.CurveStartPoint(side_curves[0]),
rs.CurveEndPoint(side_curves[0]),
rs.CurveEndPoint(side_curves[1]),
rs.CurveStartPoint(side_curves[1]),
rs.CurveStartPoint(side_curves[0])
], 1)
inside_curve = rs.OffsetCurve(perimeter_curve,
rs.CurveAreaCentroid(perimeter_curve)[0],
radius * .7)
external_curve = rs.OffsetCurve(perimeter_curve,
rs.CurveAreaCentroid(perimeter_curve)[0],
-extend)
e_points = [
rs.CurvePoints(external_curve)[0],
rs.CurvePoints(external_curve)[3]
]
e_perimeter_curve = rs.AddCurve([
rs.CurveEndPoint(side_curves[1]),
rs.CurveEndPoint(side_curves[0]), e_points[0], e_points[1],
rs.CurveEndPoint(side_curves[1])
], 1)
center_plane_a = rs.PlaneFromPoints(
rs.CurvePoints(inside_curve)[2],
rs.CurvePoints(inside_curve)[1],
rs.CurvePoints(inside_curve)[3])
center_plane_b = rs.PlaneFromPoints(
rs.CurvePoints(inside_curve)[1],
rs.CurvePoints(inside_curve)[0],
rs.CurvePoints(inside_curve)[2])
circles = [
rs.AddCircle(center_plane_a, radius + RADIUS_TOLERANCE),
rs.AddCircle(center_plane_b, radius + RADIUS_TOLERANCE)
]
bone_curve = rs.CurveBooleanUnion(
[e_perimeter_curve] +
circles) if extend else rs.CurveBooleanUnion([perimeter_curve] +
circles)
rs.DeleteObjects([
inside_curve, center_curve, perimeter_curve, curve_surface,
e_perimeter_curve, external_curve
] + side_curves + circles)
return bone_curve
def get_outer_box(bb_dims, tol, T_IBOX, T_OBOX, TOL_INSIDE, ORIGIN_OB):
"""input:
bbdims float(w,l,h). l is longest dimension.
tol float: percentage "give" to have
T_IBOX: thickness in mm
T_OBOX: thickness in mm
TOL_INSIDE: additional absolute tolerance added to the inner dimension of the box
ORIGIN_OB: origin point for placing the curves
return:
br: list of four points representing the bounding rectangle of the output.
"""
W = (1 + tol) * bb_dims[0] + T_IBOX * 2 + T_OBOX * 2 + TOL_INSIDE * 2
L = (1 + tol) * bb_dims[1] + T_IBOX * 2 + T_OBOX * 2 + TOL_INSIDE * 2
H = (1 + tol) * bb_dims[2] + T_IBOX * 2 + T_OBOX * 1 + TOL_INSIDE * 1
dy = ORIGIN_OB[1] #amount to move everything up by
n_joins_W = get_num_joins(W, J_LEN)
n_joins_L = get_num_joins(L, J_LEN)
n_joins_H = get_num_joins(H, J_LEN)
#get bounding rectangles for each geometry. placeholder; this won't all be necessary
bottom = rs.AddRectangle(ORIGIN_OB, L, W)
top = rs.AddRectangle([0, W + LCUT_GAP + dy, 0], L, W)
short_a = rs.AddRectangle([L + LCUT_GAP, dy, 0], W, H)
short_b = rs.AddRectangle([L + LCUT_GAP, H + LCUT_GAP + dy, 0], W, H)
long_a = rs.AddRectangle([L + W + LCUT_GAP * 2, dy, 0], L, H)
long_b = rs.AddRectangle([L + W + LCUT_GAP * 2, H + LCUT_GAP + dy, 0], L,
H)
tickmarks = add_tickmarks(top, TICK_DIST,
T_OBOX + T_IBOX + TOL_LID_ABSOLUTE)
grip_data = make_slots(bb_dims[0], bb_dims[1])
desired_grip_gap = 130
if bb_dims[1] > desired_grip_gap * 1.4:
slots = add_slots(top, grip_data, desired_grip_gap)
else:
slots = add_slots(top, grip_data, bb_dims[1] / 20)
rs.ObjectLayer(slots, LCUT_NAMES[1])
#turn sides into finger joins
sides_b = rs.ExplodeCurves(bottom)
jb_0 = make_join(sides_b[0], n_joins_L, 0, T_OBOX, True, True)
jb_2 = make_join(sides_b[2], n_joins_L, 0, -T_OBOX, True, True)
jb_1 = make_join(sides_b[1], n_joins_W, -T_OBOX, 0, True, True)
jb_3 = make_join(sides_b[3], n_joins_W, T_OBOX, 0, True, True)
sides_s = rs.ExplodeCurves(short_a)
js_0 = make_join(sides_s[0], n_joins_W, 0, T_OBOX, False, False)
js_2 = rs.CopyObject(sides_s[2])
js_1 = make_join(sides_s[1], n_joins_H, -T_OBOX, 0, False, False)
js_3 = make_join(sides_s[3], n_joins_H, T_OBOX, 0, False, False)
sides_l = rs.ExplodeCurves(long_a)
jl_0 = make_join(sides_l[0], n_joins_L, 0, T_OBOX, False, True)
jl_2 = rs.ExtendCurveLength(rs.CopyObject(sides_l[2]), 0, 2, -T_OBOX)
jl_1 = make_join(sides_l[1], n_joins_H, -T_OBOX, 0, True, False)
jl_3 = make_join(sides_l[3], n_joins_H, T_OBOX, 0, True, False)
sb, ss, sl = rs.JoinCurves([jb_0, jb_1, jb_2, jb_3], True), rs.JoinCurves(
[js_0, js_1, js_2, js_3],
True), rs.JoinCurves([jl_0, jl_1, jl_2, jl_3], True)
final_crvs = sb + ss + sl + [top]
rs.ObjectLayer(sb + ss + sl + [top], LCUT_NAMES[1])
final_crvs.extend(rs.CopyObjects(ss, [0, H + LCUT_GAP, 0]))
final_crvs.extend(rs.CopyObjects(sl, [0, H + LCUT_GAP, 0]))
centerpt, _ = rs.CurveAreaCentroid(short_a)
add_logo(centerpt, W, H)
all_geo = [bottom, top, short_a, short_b, long_a, long_b]
br = rs.BoundingBox(all_geo)[:4]
rs.DeleteObjects(sides_b + sides_s + sides_l)
rs.DeleteObjects([bottom, short_a, short_b, long_a, long_b])
SELECT_GUIDS.extend(final_crvs)
SELECT_GUIDS.extend(slots)
SELECT_GUIDS.extend(tickmarks)
return br
