SMW.Set_RFState(1)
for i in range(numMeas): #Loop: Measurements
for freq in FreqArry: #Loop: Frequency
SMW.Set_Freq(freq)
# FSWP.Set_Freq(freq)
lockHist = []
lockPerf = [2,0,0,0]
for pwr in pwrArry: #Loop: Power
SMW.Set_RFPwr(pwr)
FSWP.Set_InitImm()
FSWP.Set_InitImm()
# SMW.delay(2)
lock = FSWP.Get_FreqLock()
mkr = []
for m in range(1,5):
mkr.append(FSWP.Get_Mkr_Y(m))
# mkr[m-1] = FSWP.Get_Mkr_Y(m)
ffrq = FSWP.Get_Freq()
fpwr = FSWP.Get_Power()
OutStr = f'{i},{freq},{pwr:.2f},{ffrq},{fpwr},{lock},{mkr}'
OFile.write (OutStr)
lockHist.append(int(lock))
if (lockHist[-4:] == [2,0,0,0]):
break
##########################################################
### Cleanup Automation
##########################################################
SMW.jav_Close()
FSWP.jav_Close()
class TestGeneral(unittest.TestCase):
def setUp(self): #run before each test
self.FSWP = PNA().jav_OpenTest(host)
def tearDown(self): #Run after each test
self.assertEqual(self.FSWP.jav_Error()[0], '0')
self.FSWP.jav_Close()
###############################################################################
### <Test>
###############################################################################
def test_FSWP_Freq(self):
self.FSWP.Init_Spectral()
self.FSWP.Set_FreqStart(10e6)
self.FSWP.Set_FreqStop(100e6)
self.FSWP.Set_Freq(100e6)
rdStr = self.FSWP.Get_Freq()
#var = input("Please enter something: ")
if self.FSWP.connected: self.assertEqual(100e6, rdStr) # Valuecompare
def test_FSWP_Get(self):
self.FSWP.Init_PhaseNoise()
self.FSWP.Get_AttnMech()
self.FSWP.Get_Channels()
self.FSWP.Get_RefLevel()
self.FSWP.Get_SweepPoints()
self.FSWP.Get_SweepTime()
self.FSWP.Get_SweepType()
self.FSWP.Get_SweepParams()
def test_FSWP_GetScreenshot(self):
getVal = self.FSWP.Get_Screenshot()
def test_FSWP_GetTrace(self):
getVal = self.FSWP.Get_Trace_Data()
def test_FSWP_Harmonics(self):
self.FSWP.Init_Harm()
self.FSWP.Set_Harm_num(3)
self.FSWP.Set_Harm_adjust()
getVal = self.FSWP.Get_Harm_Values()
def test_FSWP_Input(self):
self.FSWP.Set_Freq(1e9)
self.FSWP.Set_Input('RF')
# self.FSWP.Set_In_YIG('ON')
# self.FSWP.Set_In_HPFilter('ON')
def test_FSWP_Marker(self):
self.FSWP.Init_Spectral()
self.FSWP.Set_Mkr_AllOff()
self.FSWP.Set_Mkr_Freq(10e6)
self.FSWP.Set_Mkr_Peak()
self.FSWP.Set_Mkr_On(2)
self.FSWP.Set_Mkr_Next()
getVal = self.FSWP.Get_Mkr_Freq()
getVal = self.FSWP.Get_Mkr_XY()
getVal = self.FSWP.Get_Mkr_Y()
def test_FSWP_PhaseNoise(self):
self.FSWP.Init_PhaseNoise()
self.FSWP.Set_SweepCont(0) # Single Sweep
self.FSWP.Set_Preamp('OFF')
self.FSWP.Set_PwrThreshold(-10)
self.FSWP.Set_Xcorr(100)
self.FSWP.Set_XcorrOpt(0)
self.FSWP.Set_XcorrOpt(1)
getVal = self.FSWP.Get_FreqLock()
getVal = self.FSWP.Get_Freq()
getVal = self.FSWP.Get_Power()
getVal = self.FSWP.Get_PN_Decade()
getVal = self.FSWP.Get_PN_Int()
def test_FSWP_Spectral_Settings(self):
self.FSWP.Init_Spectral()
self.FSWP.Set_SweepCont(1) # Contiuous Sweep
self.FSWP.Set_Freq(1e6)
self.FSWP.Set_FreqStep(1e6)
self.FSWP.Set_RefLevel(10)
self.FSWP.Set_ResBW(1e6)
self.FSWP.Set_ResBW(0) # Auto
self.FSWP.Set_VidBW(1e6)
self.FSWP.Set_VidBW(0)
self.FSWP.Set_Span(100e6)
self.FSWP.Set_SweepPoints(1001)
self.FSWP.Set_AttnMech(10)
self.FSWP.Set_AttnAuto()
self.FSWP.Set_Autolevel()
self.FSWP.Get_IFOvld()
self.FSWP.Set_DisplayUpdate('ON')
def test_FSWP_Sys_Overload(self):
getVal = self.FSWP.Get_Ovld_Stat()
def test_FSWP_Trace(self):
self.FSWP.Init_PhaseNoise()
self.FSWP.Set_Trace_Avg('POW')
self.FSWP.Set_Trace_Detector('RMS')
self.FSWP.Set_Trace_AvgCount(20)
self.FSWP.Set_Trace_AvgOff()