def test_attach_no_initial_context_setup_resp(self):
""" Attach, no initial context setup response """
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
ue_id = req.ue_id
print("***** Running attach - initial context setup timer expiry test")
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = req.ue_id
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnrecvd = s1ap_types.ueSqnRcvd_t()
sqnrecvd.pres = 0
auth_res.sqnRcvd = sqnrecvd
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
print(
"************************* Receive Initial context Setup request ",
"for UE id ",
ue_id,
)
# Send SCTP ABORT to MME
sctp_abort = s1ap_types.FwSctpAbortReq_t()
sctp_abort.cause = 0
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.SCTP_ABORT_REQ,
sctp_abort)
print(
"************************* Send Initial context Setup response ",
"for UE id ",
ue_id,
)
print("***************** Attach Aborted and UE Context released")
def test_no_attach_complete(self):
# Ground work.
self._s1ap_wrapper.configIpBlock()
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
print(
"************************* Running attach setup timer expiry test")
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = req.ue_id
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
# EPC would resend Attach accept 4 times and then would abort attach
# procedure
for i in range(4):
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
print("************************* Timeout", i + 1)
print("***************** Attach Aborted and UE Context released")
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value)
def handle_msg(self, msg):
if msg.msg_type == s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value:
self.auth_req_ind_count += 1
m = msg.cast(s1ap_types.ueAuthReqInd_t)
print("====> Received UE_AUTH_REQ_IND ue-id", m.ue_Id)
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = m.ue_Id
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP, auth_res
)
elif msg.msg_type == s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value:
self.sec_mod_cmd_ind_count += 1
m = msg.cast(s1ap_types.ueSecModeCmdInd_t)
print("============> Received UE_SEC_MOD_CMD_IND ue-id", m.ue_Id)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = m.ue_Id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete
)
elif msg.msg_type == s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value:
self.attach_accept_ind_count += 1
m = msg.cast(s1ap_types.ueAttachAccept_t)
print("====================> Received UE_ATTACH_ACCEPT_IND ue-id", m.ue_Id)
pdn_type = m.esmInfo.pAddr.pdnType
addr = m.esmInfo.pAddr.addrInfo
if self._s1ap_wrapper._s1_util.CM_ESM_PDN_IPV4 == pdn_type:
# Cast and cache the IPv4 address
ip = ipaddress.ip_address(bytes(addr[:4]))
with self._s1ap_wrapper._s1_util._lock:
self._s1ap_wrapper._s1_util._ue_ip_map[m.ue_Id] = ip
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = m.ue_Id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE, attach_complete
)
elif msg.msg_type == s1ap_types.tfwCmd.UE_IDENTITY_REQ_IND.value:
self.identity_req_ind_count += 1
m = msg.cast(s1ap_types.ueIdentityReqInd_t)
print("=> Received UE_IDENTITY_REQ_IND ue-id", m.ue_Id)
us_identity_resp = s1ap_types.ueIdentityResp_t()
us_identity_resp.ue_Id = m.ue_Id
us_identity_resp.idType = m.idType
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_IDENTITY_RESP, us_identity_resp
)
elif msg.msg_type == s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value:
self.int_ctx_setup_ind_count += 1
elif msg.msg_type == s1ap_types.tfwCmd.UE_EMM_INFORMATION.value:
self.ue_emm_information_count += 1
elif msg.msg_type == s1ap_types.tfwCmd.UE_CTX_REL_IND.value:
self.ue_ctx_rel_ind_count += 1
else:
print("Unhandled msg type", msg.msg_type)
def test_duplicate_attach(self):
""" Start the attach procedure for an UE, proceed until attach accept is
recvd. from the network. Without sending an attach accept, resend an
attach request.
"""
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
print("************************* Running duplicate attach test")
self._s1ap_wrapper._s1_util.attach(req.ue_id,
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND,
s1ap_types.ueAttachComplete_t)
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = False
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertTrue(response,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertTrue(response, s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
while True:
response = self._s1ap_wrapper.s1_util.get_response()
if (response.msg_type ==
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value):
print("Recvd an Attach accept message ignoring")
continue
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value)
break
print("************************ Running RE-Attach")
self._s1ap_wrapper._s1_util.attach(
req.ue_id, s1ap_types.tfwCmd.UE_END_TO_END_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND,
s1ap_types.ueAttachAccept_t)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("************************* Running UE detach")
# Now detach the UE
self._s1ap_wrapper._s1_util.detach(req.ue_id,
s1ap_types.ueDetachType_t.
UE_NORMAL_DETACH.value)
def exec_sec_mode_complete_step(self, ue_id):
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
print("Received Esm Information Request ue-id",
sec_mode_complete.ue_Id)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ESM_INFORMATION_REQ.value)
esm_info_req = response.cast(s1ap_types.ueEsmInformationReq_t)
return esm_info_req.tId
def test_imei_restriction_wildcard_snr(self):
"""
This TC validates imei restriction scenario where only tac
part of imei is configured i.e snr is wildcarded:
1. Send security mode complete message with a blocked imeisv
where tac is same as the one configured in mme.conf.template
2. Verify that attach reject is received with cause(5)
IMEI_NOT_ACCEPTED
If this TC is executed individually run
test_modify_mme_config_for_sanity.py to add
{ IMEI_TAC="99333821"}
under the BLOCKED_IMEI_LIST in mme.conf.template.
After execution of this TC run test_restore_mme_config_after_sanity.py
to restore the old mme.conf.template.
"""
num_ues = 1
self._s1ap_wrapper.configUEDevice(num_ues)
req = self._s1ap_wrapper.ue_req
# Send Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 1
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
print(
"********************** Sent attach req for UE id ",
req.ue_id,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
auth_req = response.cast(s1ap_types.ueAuthReqInd_t)
print(
"********************** Received auth req for UE id",
auth_req.ue_Id,
)
# Send Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
print("********************** Sent auth rsp for UE id", req.ue_id)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
sec_mod_cmd = response.cast(s1ap_types.ueSecModeCmdInd_t)
print(
"********************** Received security mode cmd for UE id",
sec_mod_cmd.ue_Id,
)
# Send Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
sec_mode_complete.imeisv_pres = True
imeisv = "9933382135103723"
# Check if the len of imeisv exceeds 16
self.assertLessEqual(len(imeisv), 16)
for i in range(0, len(imeisv)):
sec_mode_complete.imeisv[i] = ctypes.c_ubyte(int(imeisv[i]))
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
print(
"********************** Sent security mode complete for UE id",
req.ue_id,
)
# Receive Attach Reject
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_REJECT_IND.value,
)
attach_rej = response.cast(s1ap_types.ueAttachRejInd_t)
print(
"********************** Received attach reject for UE id %d"
" with emm cause %d" % (attach_rej.ue_Id, attach_rej.cause), )
# Verify cause
self.assertEqual(
attach_rej.cause,
s1ap_types.TFW_EMM_CAUSE_IMEI_NOT_ACCEPTED,
)
# UE Context release
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
ue_context_rel = response.cast(s1ap_types.ueCntxtRelReq_t)
print(
"********************** Received UE_CTX_REL_IND for UE id ",
ue_context_rel.ue_Id,
)
def test_no_esm_information_rsp_with_mme_restart(self):
""" Restart MME after receiving ESM information req during attach +
after MME recovers perform end-end attach + detach """
num_ues = 1
self._s1ap_wrapper.configUEDevice(num_ues)
req = self._s1ap_wrapper.ue_req
ue_id = req.ue_id
# Send Attach
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = ue_id
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
# enabling ESM Information transfer flag
attach_req.eti.pres = 1
attach_req.eti.esm_info_transfer_flag = 1
print("Sending Attach Request ue-id", ue_id)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
print("Received Auth Req for ue-id", ue_id)
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = ue_id
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
print("Sending Auth Response for ue-id", ue_id)
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
print("Received Security Mode Command for ue-id", ue_id)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
print("Sent Security Mode Complete for ue-id", ue_id)
# Esm Information Request indication
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ESM_INFORMATION_REQ.value)
print("Received Esm Information Request ue-id", ue_id)
print("************************* Restarting MME service on", "gateway")
self._s1ap_wrapper.magmad_util.restart_services(["mme"])
for j in range(30):
print("Waiting for", j, "seconds")
time.sleep(1)
# Receive UE_ESM_INFORMATION_REQ, as sometimes MME retransmits
# UE_ESM_INFORMATION_REQ message before it restarts
# as T3489 timer is only 4 secs.
response = self._s1ap_wrapper.s1_util.get_response()
if response.msg_type == s1ap_types.tfwCmd.UE_ESM_INFORMATION_REQ.value:
print(
"Received retransmitted UE_ESM_INFORMATION_REQ for ue-id",
ue_id,
)
# Wait for UE_CTX_REL_IND
global response
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value)
# Perform end-end attach
self._s1ap_wrapper.s1_util.attach(
ue_id,
s1ap_types.tfwCmd.UE_END_TO_END_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND,
s1ap_types.ueAttachAccept_t,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print(
"******************* Running UE detach (switch-off) for ",
"UE id ",
ue_id,
)
# Now detach the UE
self._s1ap_wrapper.s1_util.detach(
ue_id, s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value, False)
def test_imei_restriction_smc(self):
"""
This TC does the following:
1. Send security mode complete message with a blocked imeisv
which is same as the one configured in mme.conf.template
2. Verify that attach reject is received with cause(5)
IMEI_NOT_ACCEPTED
3. Attach a 2nd UE with an allowed IMEISV by invoking attach utility
function
4. Detach the UE
If this TC is executed individually run
test_modify_mme_config_for_sanity.py to add
{ IMEI="9900048235103723"}
under the BLOCKED_IMEI_LIST in mme.conf.template.
After execution of this TC run test_restore_mme_config_after_sanity.py
to restore the old mme.conf.template.
"""
num_ues = 2
ue_ids = []
self._s1ap_wrapper.configUEDevice(num_ues)
for _ in range(num_ues):
req = self._s1ap_wrapper.ue_req
ue_ids.append(req.ue_id)
# Send Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 1
attach_req.ue_Id = ue_ids[0]
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
print(
"********************** Sent attach req for UE id ",
ue_ids[0],
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
auth_req = response.cast(s1ap_types.ueAuthReqInd_t)
print(
"********************** Received auth req for UE id",
auth_req.ue_Id,
)
# Send Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = ue_ids[0]
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
print("********************** Sent auth rsp for UE id", ue_ids[0])
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
sec_mod_cmd = response.cast(s1ap_types.ueSecModeCmdInd_t)
print(
"********************** Received security mode cmd for UE id",
sec_mod_cmd.ue_Id,
)
# Send Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = ue_ids[0]
sec_mode_complete.imeisv_pres = True
imeisv = "9900048235103723"
# Check if the len of imeisv exceeds 16
self.assertLessEqual(len(imeisv), 16)
for i in range(0, len(imeisv)):
sec_mode_complete.imeisv[i] = ctypes.c_ubyte(int(imeisv[i]))
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
print(
"********************** Sent security mode complete for UE id",
ue_ids[0],
)
# Receive Attach Reject
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_REJECT_IND.value,
)
attach_rej = response.cast(s1ap_types.ueAttachRejInd_t)
print(
"********************** Received attach reject for UE id %d"
" with emm cause %d" % (attach_rej.ue_Id, attach_rej.cause), )
# Verify cause
self.assertEqual(
attach_rej.cause,
s1ap_types.TFW_EMM_CAUSE_IMEI_NOT_ACCEPTED,
)
# UE Context release
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
ue_context_rel = response.cast(s1ap_types.ueCntxtRelReq_t)
print(
"********************** Received UE_CTX_REL_IND for UE id ",
ue_context_rel.ue_Id,
)
# Attach the 2nd UE
print(
"************ Running end-end attach for UE id ************",
ue_ids[1],
)
self._s1ap_wrapper._s1_util.attach(
ue_ids[1],
s1ap_types.tfwCmd.UE_END_TO_END_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND,
s1ap_types.ueAttachAccept_t,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("********************** Sleeping for 2 seconds")
time.sleep(2)
print("********************** Running UE detach for UE id ", ue_ids[1])
# Now detach the UE
self._s1ap_wrapper.s1_util.detach(
ue_ids[1],
s1ap_types.ueDetachType_t.UE_NORMAL_DETACH.value,
)
def test_ics_timer_expiry_ue_unregistered(self):
"""
Simulating ICS timer expiry by dropping ICS req during attach
i.e UE is in unregistered state.
Network sends UE context release cmd after ICS timer expires
"""
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
# Trigger Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 1
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
print("*** Sending indication to drop Initial Context Setup Req ***")
drop_init_ctxt_setup_req = s1ap_types.UeDropInitCtxtSetup()
drop_init_ctxt_setup_req.ue_Id = req.ue_id
drop_init_ctxt_setup_req.flag = 1
# Timer to release UE context at s1ap tester
drop_init_ctxt_setup_req.tmrVal = 2000
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SET_DROP_ICS, drop_init_ctxt_setup_req)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
# enbApp sends UE_ICS_DROPD_IND message to tfwApp after dropping
# ICS request
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ICS_DROPD_IND.value)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value)
print(
"************************* Received UE_CTX_REL_IND for UE id ",
req.ue_id,
)
def test_esm_information(self):
""" Testing of sending Esm Information procedure """
num_ues = 1
self._s1ap_wrapper.configUEDevice(num_ues)
print("************************* sending Attach Request for ue-id : 1")
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = 1
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
# enabling ESM Information transfer flag
attach_req.eti.pres = 1
attach_req.eti.esm_info_transfer_flag = 1
print("Sending Attach Request ue-id", attach_req.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
print("Received auth req ind ")
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = 1
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
print("Sending Auth Response ue-id", auth_res.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
print("Received Security Mode Command ue-id", auth_res.ue_Id)
time.sleep(1)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
# Esm Information Request indication
print("Received Esm Information Request ue-id",
sec_mode_complete.ue_Id)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ESM_INFORMATION_REQ.value)
esm_info_req = response.cast(s1ap_types.ueEsmInformationReq_t)
# Sending Esm Information Response
print("Sending Esm Information Response ue-id",
sec_mode_complete.ue_Id)
esm_info_response = s1ap_types.ueEsmInformationRsp_t()
esm_info_response.ue_Id = 1
esm_info_response.tId = esm_info_req.tId
esm_info_response.pdnAPN_pr.pres = 1
s = "magma.ipv4"
esm_info_response.pdnAPN_pr.len = len(s)
esm_info_response.pdnAPN_pr.pdn_apn = (ctypes.c_ubyte * 100)(
*[ctypes.c_ubyte(ord(c)) for c in s[:100]])
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ESM_INFORMATION_RSP, esm_info_response)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE, attach_complete)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("*** Running UE detach ***")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = 1
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST, detach_req)
# Wait for UE context release command
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value)
def test_attach_ics_drop_with_mme_restart(self):
"""Stateless Initial Context Setup Drop Test Case:
1. Step-by-step UE attach procedure
2. Set flag in S1APTester to drop ICS request message
3. Restart MME after getting ICS request dropped indication
4. Reset flag to not drop next ICS request messages
5. Handle UE context release after no ICS response to MME
6. Re-attach UE to verify if UE context was cleared properly
after handling the NW Initiated detach once MME comes up
"""
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
# Send Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 3
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
print("******************** Sending Attach Request")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
print("******************** Received Authentiction Request Indication")
# Send Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
print("******************** Sending Authentiction Response")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP, auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
print("******************** Received Security Mode Command Indication")
print(
"******************** Setting flag to drop Initial Context Setup "
"Request",
)
drop_init_ctxt_setup_req = s1ap_types.UeDropInitCtxtSetup()
drop_init_ctxt_setup_req.ue_Id = req.ue_id
drop_init_ctxt_setup_req.flag = 1
# Timer to release UE context at s1ap tester
drop_init_ctxt_setup_req.tmrVal = 2000
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SET_DROP_ICS, drop_init_ctxt_setup_req,
)
print("******************** Sending Security Mode Complete")
# Send Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete,
)
# enbApp sends UE_ICS_DROPD_IND message to tfwApp after dropping
# ICS request
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_ICS_DROPD_IND.value,
)
print(
"******************** Received Initial Context Setup Dropped "
"Indication",
)
print("******************** Restarting MME service on gateway")
self._s1ap_wrapper.magmad_util.restart_services(["mme"])
print(
"******************** Resetting flag to not drop next Initial "
"Context Setup Request messages",
)
drop_init_ctxt_setup_req = s1ap_types.UeDropInitCtxtSetup()
drop_init_ctxt_setup_req.ue_Id = req.ue_id
drop_init_ctxt_setup_req.flag = 0
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SET_DROP_ICS, drop_init_ctxt_setup_req,
)
for j in range(30):
print("Waiting for", j, "seconds")
time.sleep(1)
# It has been observed that despite getting the restart command on
# time, MME sometimes restarts after a delay of 5-6 seconds. If MME
# restarts before ICS timer expiry of 4 seconds, it will send NW
# initiated detach request with type re-attach required after coming
# up, else MME will do implicit detach and send UE context release
# command to release the S1AP context
print(
"******************** Waiting for NW initiated Detach Request or "
"UE Context Release Indication",
)
resp_count = 0
while True:
resp_count += 1
# Receive NW initiated detach request
response = self._s1ap_wrapper.s1_util.get_response()
if (
response.msg_type
== s1ap_types.tfwCmd.UE_NW_INIT_DETACH_REQUEST.value
):
nw_init_detach_req = response.cast(
s1ap_types.ueNwInitdetachReq_t,
)
print(
"******************** Received NW initiated Detach Request"
" with detach type ",
nw_init_detach_req.Type,
)
self.assertEqual(
nw_init_detach_req.Type,
s1ap_types.ueNwInitDetType_t.TFW_RE_ATTACH_REQUIRED.value,
)
if resp_count == 1:
# Send detach accept
detach_accept = s1ap_types.ueTrigDetachAcceptInd_t()
detach_accept.ue_Id = req.ue_id
print(
"******************** Sending UE triggered Detach "
"Accept message",
)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_TRIGGERED_DETACH_ACCEPT,
detach_accept,
)
else:
print(
"******************** Ignoring re-transmitted (",
resp_count,
") NW initiated detach request message",
)
else:
break
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
print("******************** Received UE Context Release indication")
print(
"******************** Running End to End attach to verify if "
"UE context was released properly after handling ICS drop for "
"UE id ",
req.ue_id,
)
# Now actually complete the attach
self._s1ap_wrapper._s1_util.attach(
req.ue_id,
s1ap_types.tfwCmd.UE_END_TO_END_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND,
s1ap_types.ueAttachAccept_t,
)
# Wait for EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print(
"******************** Running UE detach (switch-off) for ",
"UE id ",
req.ue_id,
)
# Now detach the UE
self._s1ap_wrapper.s1_util.detach(
req.ue_id,
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value,
True,
)
def test_attach_enb_rlf(self):
"""
Attach, after attach procedure is completed, eNB detects the RLF
i.e., releasing the context by sending UE context release request
with cause Radio Link Failure by that time we sending one more
attach request
"""
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
# Trigger Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.ue_Id = 1
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
print("***Triggering Attach Request ***")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = 1
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value,
)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE,
attach_complete,
)
print("***Triggering Re-Attach Request ***")
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.ue_Id = 1
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
# Send UE context release request with cause Radio Link Failure
ue_ctxt_rel_req = s1ap_types.ueCntxtRelReq_t()
ue_ctxt_rel_req.ue_Id = 1
ue_ctxt_rel_req.cause.causeVal = (
gpp_types.CauseRadioNetwork.RADIO_CONNECTION_WITH_UE_LOST.value)
self._s1ap_wrapper.s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_CNTXT_REL_REQUEST,
ue_ctxt_rel_req,
)
time.sleep(1)
def test_resync(self):
"""Attach logic where we bump up the seq number stored in UE SQN
array in order to trigger authentication failure from UE to
verify the re-sync of seq number logic in EPC"""
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
print("************************* Running sync failure test")
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = req.ue_id
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
# Trigger Attach
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqn_recvd = s1ap_types.ueSqnRcvd_t()
max_sqn_recvd = s1ap_types.ueSqnRcvd_t()
# Use SQN received from EPC as is
sqn_recvd.pres = False
# Set UE side max SQN value to bigger than value received from EPC
# This is to trigger auth failure with cause = Sync Failure
max_sqn_recvd.pres = True
max_sqn_recvd.sqn = (0, 0, 0, 0, 0, 96)
auth_res.sqnRcvd = sqn_recvd
auth_res.maxSqnRcvd = max_sqn_recvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
# Verify that EPC re-sends Authentication Request
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
print("************************* Retrying authentication")
# Use SQN received from EPC as is
sqn_recvd.pres = False
auth_res.sqnRcvd = sqn_recvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
# Trigger Security mode complete message
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
# Receive initial context setup and attach accept indication
response = (self._s1ap_wrapper._s1_util.
receive_initial_ctxt_setup_and_attach_accept())
attach_acc = response.cast(s1ap_types.ueAttachAccept_t)
print(
"********************** Received attach accept for UE Id:",
attach_acc.ue_Id,
)
# Trigger Attach complete message
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE,
attach_complete,
)
print("************************* UE Attach Complete")
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("************************* Running UE detach")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = req.ue_id
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST,
detach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
def test_enb_partial_reset_con_dereg(self):
"""Test ENB partial reset with 1 UE while UE is connected and
de-registered
"""
ue_ids = []
num_ues = 1
self._s1ap_wrapper.configUEDevice(num_ues)
for _ in range(num_ues):
req = self._s1ap_wrapper.ue_req
print(
"************************* Calling attach for UE id",
req.ue_id,
)
# Trigger Attach Request with PDN_Type = IPv4v6
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
# Set PDN TYPE to IPv4V6 i.e. 3. IPV4 is equal to 1
# IPV6 is equal to 2 in value
pdn_type.pdn_type = 1
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
print(
"************************* Triggering Attach Request with PDN "
"Type IPv4 test", )
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
# Receive initial context setup and attach accept indication
response = (self._s1ap_wrapper._s1_util.
receive_initial_ctxt_setup_and_attach_accept())
attach_acc = response.cast(s1ap_types.ueAttachAccept_t)
print(
"********************** Received attach accept for UE Id:",
attach_acc.ue_Id,
)
ue_ids.append(req.ue_id)
# Trigger eNB Reset
# Add delay to ensure S1APTester sends attach complete before sending
# eNB Reset Request
time.sleep(0.5)
print("************************* Sending eNB Partial Reset Request")
reset_req = s1ap_types.ResetReq()
reset_req.rstType = s1ap_types.resetType.PARTIAL_RESET.value
reset_req.cause = s1ap_types.ResetCause()
reset_req.cause.causeType = (
s1ap_types.NasNonDelCauseType.TFW_CAUSE_MISC.value)
# Set the cause to MISC.hardware-failure
reset_req.cause.causeVal = 3
reset_req.r = s1ap_types.R()
reset_req.r.partialRst = s1ap_types.PartialReset()
reset_req.r.partialRst.numOfConn = num_ues
reset_req.r.partialRst.ueS1apIdPairList = (
(s1ap_types.UeS1apIdPair) * reset_req.r.partialRst.numOfConn)()
for indx in range(reset_req.r.partialRst.numOfConn):
reset_req.r.partialRst.ueS1apIdPairList[indx].ueId = ue_ids[indx]
print(
"Reset_req.r.partialRst.ueS1apIdPairList[",
indx,
"].ueId",
reset_req.r.partialRst.ueS1apIdPairList[indx].ueId,
)
self._s1ap_wrapper.s1_util.issue_cmd(
s1ap_types.tfwCmd.RESET_REQ,
reset_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type, s1ap_types.tfwCmd.RESET_ACK.value)
def test_attach_detach_ics_failure(self):
""" Initial Context Setup Failure Test Case"""
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
# Trigger Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 3
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
print("***Triggering Attach Request***")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
init_ctxt_setup_fail = s1ap_types.ueInitCtxtSetupFail()
init_ctxt_setup_fail.ue_Id = req.ue_id
init_ctxt_setup_fail.flag = 1
init_ctxt_setup_fail.causeType = 1
init_ctxt_setup_fail.causeType = 0
print("*** Setting Initial Context Setup Failure ***")
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SET_INIT_CTXT_SETUP_FAIL,
init_ctxt_setup_fail,
)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
print("*** Received Initial Context Setup Failure ***")
# Send SCTP ABORT to MME
sctp_abort = s1ap_types.FwSctpAbortReq_t()
sctp_abort.cause = 0
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.SCTP_ABORT_REQ,
sctp_abort,
)
def test_attach_esm_information_with_apn_correction(self):
""" Testing of sending wrong APN in Esm Information procedure and
using APN correction feature to override it """
num_ues = 1
print('************************* restarting mme')
self._s1ap_wrapper.magmad_util.restart_services(['mme'])
for j in range(15):
print("Waiting mme restart for", j, "seconds")
time.sleep(1)
self._s1ap_wrapper.configUEDevice_ues_same_imsi(num_ues)
print("************************* sending Attach Request for ue-id : 1")
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = 1
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
# enabling ESM Information transfer flag
attach_req.eti.pres = 1
attach_req.eti.esm_info_transfer_flag = 1
print("Sending Attach Request ue-id", attach_req.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
print("Received auth req ind ")
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = 1
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
print("Sending Auth Response ue-id", auth_res.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
print("Received Security Mode Command ue-id", auth_res.ue_Id)
time.sleep(1)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
# Esm Information Request indication
print(
"Received Esm Information Request ue-id",
sec_mode_complete.ue_Id,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ESM_INFORMATION_REQ.value,
)
esm_info_req = response.cast(s1ap_types.ueEsmInformationReq_t)
# Sending Esm Information Response
print(
"Sending Esm Information Response ue-id",
sec_mode_complete.ue_Id,
)
esm_info_response = s1ap_types.ueEsmInformationRsp_t()
esm_info_response.ue_Id = 1
esm_info_response.tId = esm_info_req.tId
esm_info_response.pdnAPN_pr.pres = 1
s = "oai"
esm_info_response.pdnAPN_pr.len = len(s)
esm_info_response.pdnAPN_pr.pdn_apn = (ctypes.c_ubyte * 100)(
*[ctypes.c_ubyte(ord(c)) for c in s[:100]], )
print("Sending Esm Information with wrong APN ", s)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ESM_INFORMATION_RSP,
esm_info_response,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value,
)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE,
attach_complete,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("*** Running UE detach ***")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = 1
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST,
detach_req,
)
# Wait for UE context release command
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
# Disable APN Correction
self._s1ap_wrapper.magmad_util.config_apn_correction(
MagmadUtil.apn_correction_cmds.DISABLE, )
self._s1ap_wrapper.magmad_util.restart_services(['mme'])
for j in range(10):
print("Waiting mme restart for", j, "seconds")
time.sleep(1)
def test_attach_delay_ue_ctxt_rel_cmp(self):
""" Attach, Delay Ue context release complete """
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
# Trigger Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
print("********Triggering Attach Request ")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
delay_ue_ctxt_rel_cmp = s1ap_types.UeDelayUeCtxtRelCmp()
delay_ue_ctxt_rel_cmp.ue_Id = req.ue_id
delay_ue_ctxt_rel_cmp.flag = 1
delay_ue_ctxt_rel_cmp.tmrVal = 1000
print("*** Setting Delay for Ue context release complete ***")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SET_DELAY_UE_CTXT_REL_CMP,
delay_ue_ctxt_rel_cmp,
)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE, attach_complete)
time.sleep(0.5)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_EMM_INFORMATION.value)
time.sleep(0.5)
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = req.ue_id
detach_req.ueDetType = s1ap_types.ueDetachType_t.UE_NORMAL_DETACH.value
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST, detach_req)
response = self._s1ap_wrapper._s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_DETACH_ACCEPT_IND.value)
print(
"*** Sending UE context release request ",
"for UE id ***",
req.ue_id,
)
# Send UE context release request to move UE to idle mode
# ue_ctxt_rel_req = s1ap_types.ueCntxtRelReq_t()
uectxtrel_req = s1ap_types.ueCntxtRelReq_t()
uectxtrel_req.ue_Id = req.ue_id
uectxtrel_req.cause.causeVal = (
gpp_types.CauseRadioNetwork.RELEASE_DUE_TO_EUTRAN_GENERATED_REASON.
value)
self._s1ap_wrapper.s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_CNTXT_REL_REQUEST, uectxtrel_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value)
time.sleep(10)
def test_imei_restriction_no_imeisv_in_smc(self):
"""
This TC does the following:
UE 1:
1. Send security mode complete message without imeisv
2. Receive identity request with id type imeisv
3. Send identity rsp with blocked imeisv
4. Verify attach reject is received with cause(5)
IMEI_NOT_ACCEPTED
UE 2:
1. Send security mode complete message without imeisv
2. Receive identity request with id type imeisv
3. Send identity rsp with an allowed imeisv
4. Detach the UE
If this TC is executed individually run
test_modify_mme_config_for_sanity.py to add
{ IMEI="9900048235103723" }
under the BLOCKED_IMEI_LIST in mme.conf.template.
After execution of this TC run test_restore_mme_config_after_sanity.py
to restore the old mme.conf.template.
"""
num_ues = 2
ue_ids = []
self._s1ap_wrapper.configUEDevice(num_ues)
for _ in range(num_ues):
req = self._s1ap_wrapper.ue_req
ue_ids.append(req.ue_id)
# Send Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 1
attach_req.ue_Id = ue_ids[0]
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
print(
"********************** Sent attach req for UE id ",
ue_ids[0],
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
auth_req = response.cast(s1ap_types.ueAuthReqInd_t)
print(
"********************** Received auth req for UE id",
auth_req.ue_Id,
)
# Send Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = ue_ids[0]
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
print("********************** Sent auth rsp for UE id", ue_ids[0])
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
sec_mod_cmd = response.cast(s1ap_types.ueSecModeCmdInd_t)
print(
"********************** Received security mode cmd for UE id",
sec_mod_cmd.ue_Id,
)
# Send Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = ue_ids[0]
# Do not include imeisv
sec_mode_complete.noImeisv = True
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
print(
"********************** Sent security mode complete for UE id",
ue_ids[0],
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_IDENTITY_REQ_IND.value,
)
id_req = response.cast(s1ap_types.ueIdentityReqInd_t)
print(
"********************** Received identity req for UE id",
id_req.ue_Id,
)
# Mobile Identity types
# IMSI=1, IMEI=2, IMEISV=3, TMSI=4, TMGI=5, GUTI=6
identity_resp = s1ap_types.ueIdentityResp_t()
identity_resp.ue_Id = ue_ids[0]
identity_resp.idType = 3
identity_resp.idValPres = True
imeisv = "9900048235103723"
# Check if the len of imeisv exceeds 16
self.assertLessEqual(len(imeisv), 16)
for i in range(0, len(imeisv)):
identity_resp.idVal[i] = ctypes.c_ubyte(int(imeisv[i]))
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_IDENTITY_RESP,
identity_resp,
)
print("********************** Sent identity rsp for UE id", ue_ids[0])
# Receive Attach Reject
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_REJECT_IND.value,
)
attach_rej = response.cast(s1ap_types.ueAttachRejInd_t)
print(
"********************** Received attach reject for UE id %d"
" with emm cause %d" % (ue_ids[0], attach_rej.cause), )
# Verify cause
self.assertEqual(
attach_rej.cause,
s1ap_types.TFW_EMM_CAUSE_IMEI_NOT_ACCEPTED,
)
# UE Context release
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
ue_context_rel = response.cast(s1ap_types.ueCntxtRelReq_t)
print(
"********************** Received UE_CTX_REL_IND for UE id ",
ue_context_rel.ue_Id,
)
# Attach the 2nd UE
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 1
attach_req.ue_Id = ue_ids[1]
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
print(
"********************** Sent attach req for UE id ",
ue_ids[1],
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
auth_req = response.cast(s1ap_types.ueAuthReqInd_t)
print(
"********************** Received auth req for UE id",
auth_req.ue_Id,
)
# Send Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = ue_ids[1]
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
print("********************** Sent auth rsp for UE id", ue_ids[1])
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
sec_mod_cmd = response.cast(s1ap_types.ueSecModeCmdInd_t)
print(
"********************** Received security mode cmd for UE id",
sec_mod_cmd.ue_Id,
)
# Send Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = ue_ids[1]
# Do not include imeisv
sec_mode_complete.noImeisv = True
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
print(
"********************** Sent security mode complete for UE id",
ue_ids[1],
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_IDENTITY_REQ_IND.value,
)
id_req = response.cast(s1ap_types.ueIdentityReqInd_t)
print(
"********************** Received identity req for UE id",
id_req.ue_Id,
)
# Send Identity Request
id_req = response.cast(s1ap_types.ueIdentityReqInd_t)
identity_resp = s1ap_types.ueIdentityResp_t()
identity_resp.ue_Id = id_req.ue_Id
identity_resp.idType = id_req.idType
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_IDENTITY_RESP,
identity_resp,
)
print("********************** Sent identity rsp for UE id", ue_ids[1])
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value,
)
attach_acc = response.cast(s1ap_types.ueAttachAccept_t)
print(
"********************** Received attach accept for UE id",
attach_acc.ue_Id,
)
# Send Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = ue_ids[1]
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE,
attach_complete,
)
print(
"********************** Sent attach complete for UE id",
ue_ids[1],
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_EMM_INFORMATION.value,
)
print("********************** Sleeping for 0.5 seconds ")
time.sleep(0.5)
# Now detach the UE
print("********************** Running UE detach for UE id ", ue_ids[1])
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = ue_ids[1]
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST,
detach_req,
)
# Wait for UE context release command
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
ue_context_rel = response.cast(s1ap_types.ueCntxtRelReq_t)
print(
"********************** Received UE_CTX_REL_IND for UE id ",
ue_context_rel.ue_Id,
)
def test_attach_ipv4v6_pdn_type(self):
""" Test Attach for the UEs that are dual IP stack IPv4v6
capable """
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
# Trigger Attach Request with PDN_Type = IPv4v6
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
# Set PDN TYPE to IPv4V6 i.e. 3. IPV4 is equal to 1
# IPV6 is equal to 2 in value
pdn_type.pdn_type = 3
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
print("********Triggering Attach Request with PND Type IPv4v6 test")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE, attach_complete)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("************************* Running UE detach")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = req.ue_id
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST, detach_req)
# Wait for UE context release command
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value)
def test_attach_esm_info_timerexpiration_max_retries(self):
"""Testing of sending Esm Information procedure"""
num_ues = 1
# The maximum no. of allowed transmissions of ESM information request
# as per 3gpp spec 24.301 is 3. Since MME does not send the PDN
# connectivity reject message as of now after maximum number of
# T3489 expires, test script does not receive any failure response and
# has no provision to handle it as well. Therefore, test case gets
# stuck waiting for response, if max_retries value is greater than 3
max_retries = 3
self._s1ap_wrapper.configUEDevice(num_ues)
print("************************* sending Attach Request for ue-id : 1")
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = 1
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
# enabling ESM Information transfer flag
attach_req.eti.pres = 1
attach_req.eti.esm_info_transfer_flag = 1
print("Sending Attach Request ue-id", attach_req.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
print("Received auth req ind ")
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = 1
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
print("Sending Auth Response ue-id", auth_res.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
print("Received Security Mode Command ue-id", auth_res.ue_Id)
time.sleep(1)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
for i in range(max_retries):
# Esm Information Request indication
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ESM_INFORMATION_REQ.value,
)
print(
"Received Esm Information Request (",
i + 1,
") ue-id",
sec_mode_complete.ue_Id,
)
esm_info_req = response.cast(s1ap_types.ueEsmInformationReq_t)
# Sleep for 5 seconds to trigger last max retry count timer expiry
time.sleep(5)
# Sending Esm Information Response
print(
"Sending Esm Information Response ue-id",
sec_mode_complete.ue_Id,
)
esm_info_response = s1ap_types.ueEsmInformationRsp_t()
esm_info_response.ue_Id = 1
esm_info_response.tId = esm_info_req.tId
esm_info_response.pdnAPN_pr.pres = 1
s = "magma.ipv4"
esm_info_response.pdnAPN_pr.len = len(s)
esm_info_response.pdnAPN_pr.pdn_apn = (ctypes.c_ubyte * 100)(
*[ctypes.c_ubyte(ord(c)) for c in s[:100]],
)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ESM_INFORMATION_RSP,
esm_info_response,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value,
)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE,
attach_complete,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("*** Running UE detach ***")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = 1
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value
)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST,
detach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
def test_different_enb_s1ap_id_same_ue(self):
""" Testing of sending different enb S1ap-ID for same UE """
num_ues = 1
self._s1ap_wrapper.configUEDevice_ues_same_imsi(num_ues)
print("************************* sending Attach Request for ue-id : 1")
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = 1
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
print("Sending Attach Request ue-id", attach_req.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertTrue(response, s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
print("Received auth req ind ")
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = 1
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
print("Sending Auth Response ue-id", auth_res.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertTrue(response, s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
print("Received Security Mode Command ue-id", auth_res.ue_Id)
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = 2
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
print("Sending Attach Request ue-id", attach_req.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
time.sleep(1)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertTrue(response, s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertTrue(response, s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE, attach_complete)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("************************* Running UE detach for UE id:1 ")
print("************************* Running UE detach")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = 1
detach_req.ueDetType = s1ap_types.ueDetachType_t.\
UE_SWITCHOFF_DETACH.value
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST, detach_req)
# Wait for UE context release command
response = self._s1ap_wrapper.s1_util.get_response()
self.assertTrue(response, s1ap_types.tfwCmd.UE_CTX_REL_IND.value)
def _create_attach_ipv4v6_pdn_type_req(self, pdn_type_value):
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
ue_req = self._s1ap_wrapper.ue_req
# Trigger Attach Request with PDN_Type = IPv4v6
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
# Set PDN TYPE to IPv4V6 i.e. 3. IPV4 is equal to 1
# IPV6 is equal to 2 in value
pdn_type.pdn_type = pdn_type_value
attach_req.ue_Id = ue_req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
print(
"********Triggering Attach Request with PDN Type IPv4v6 test, "
"pdn_type_value",
pdn_type_value,
)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = ue_req.ue_id
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = ue_req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
# Attach Reject will be sent since IPv6 PDN Type is not configured
if pdn_type_value == 2:
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_REJECT_IND.value,
)
return self._s1ap_wrapper.s1_util.get_response()
# Receive initial context setup and attach accept indication
response = (self._s1ap_wrapper._s1_util.
receive_initial_ctxt_setup_and_attach_accept())
attach_acc = response.cast(s1ap_types.ueAttachAccept_t)
print(
"********************** Received attach accept for UE Id:",
attach_acc.ue_Id,
)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = ue_req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE,
attach_complete,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("************************* Running UE detach")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = ue_req.ue_id
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST,
detach_req,
)
# Wait for UE context release command
return self._s1ap_wrapper.s1_util.get_response()
def test_enb_partial_reset(self):
""" attach 32 UEs """
ue_ids = []
num_ues = 1
self._s1ap_wrapper.configUEDevice(num_ues)
for _ in range(num_ues):
req = self._s1ap_wrapper.ue_req
print(
"************************* Calling attach for UE id ",
req.ue_id,
)
# Trigger Attach Request with PDN_Type = IPv4v6
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
# Set PDN TYPE to IPv4V6 i.e. 3. IPV4 is equal to 1
# IPV6 is equal to 2 in value
pdn_type.pdn_type = 1
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
print("********Triggering Attach Request with PND Type IPv4 test")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
response = self._s1ap_wrapper.s1_util.get_response()
print("response message type for ATTTACH ACC", response.msg_type)
print("acc", s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value,
)
ue_ids.append(req.ue_id)
# Trigger eNB Reset
# Add delay to ensure S1APTester sends attach partial before sending
# eNB Reset Request
time.sleep(0.5)
print("************************* Sending eNB Partial Reset Request")
reset_req = s1ap_types.ResetReq()
reset_req.rstType = s1ap_types.resetType.PARTIAL_RESET.value
reset_req.cause = s1ap_types.ResetCause()
reset_req.cause.causeType = (
s1ap_types.NasNonDelCauseType.TFW_CAUSE_MISC.value)
# Set the cause to MISC.hardware-failure
reset_req.cause.causeVal = 3
reset_req.r = s1ap_types.R()
reset_req.r.partialRst = s1ap_types.PartialReset()
reset_req.r.partialRst.numOfConn = num_ues
reset_req.r.partialRst.ueS1apIdPairList = (
(s1ap_types.UeS1apIdPair) * reset_req.r.partialRst.numOfConn)()
for indx in range(reset_req.r.partialRst.numOfConn):
reset_req.r.partialRst.ueS1apIdPairList[indx].ueId = ue_ids[indx]
print(
"Reset_req.r.partialRst.ueS1apIdPairList[indx].ueId",
reset_req.r.partialRst.ueS1apIdPairList[indx].ueId,
indx,
)
print("ue_ids", ue_ids)
self._s1ap_wrapper.s1_util.issue_cmd(
s1ap_types.tfwCmd.RESET_REQ,
reset_req,
)
response1 = self._s1ap_wrapper.s1_util.get_response()
print("response1 message type", response1.msg_type)
self.assertEqual(response1.msg_type, s1ap_types.tfwCmd.RESET_ACK.value)
# Trigger detach request
"""time.sleep(0.5)
def test_guti_attach_with_zero_mtmsi(self):
"""1. Perform IMSI attach
2. Move UE to idle mode
3. Send GUTI attach request for the same UE with M-TMSI value 0
4. Detach the UE
"""
num_ues = 1
self._s1ap_wrapper.configUEDevice(num_ues)
req = self._s1ap_wrapper.ue_req
print(
"************************* Running End to End attach for UE id:",
req.ue_id,
)
# Now actually complete the attach
self._s1ap_wrapper._s1_util.attach(
req.ue_id,
s1ap_types.tfwCmd.UE_END_TO_END_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND,
s1ap_types.ueAttachAccept_t,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
time.sleep(0.5)
# Send UE context release request to move UE to idle mode
print(
"************************* Sending UE context release request ",
"for UE id ",
req.ue_id,
)
ureq = s1ap_types.ueCntxtRelReq_t()
ureq.ue_Id = req.ue_id
ureq.cause.causeVal = gpp_types.CauseRadioNetwork.USER_INACTIVITY.value
self._s1ap_wrapper.s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_CNTXT_REL_REQUEST,
ureq,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
time.sleep(5)
# Send GUTI attach request with M-TMSI value as 0
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_GUTI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 1
mcc = "001"
mnc = "01"
mcc_len = len(mcc)
mnc_len = len(mnc)
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
attach_req.guti_mi.pres = True
for i in range(0, mcc_len):
attach_req.guti_mi.guti.mcc[i] = ctypes.c_ubyte(int(mcc[i]))
for i in range(0, mnc_len):
attach_req.guti_mi.guti.mnc[i] = ctypes.c_ubyte(int(mnc[i]))
attach_req.guti_mi.guti.mmeGrdId = 314
attach_req.guti_mi.guti.mmeCode = 30
attach_req.guti_mi.guti.mTmsi = 0
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
print(
"********************** Sent attach req for UE id ",
attach_req.ue_Id,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_IDENTITY_REQ_IND.value,
)
id_req = response.cast(s1ap_types.ueIdentityReqInd_t)
print(
"********************** Received identity req for UE id",
id_req.ue_Id,
)
identity_resp = s1ap_types.ueIdentityResp_t()
identity_resp.ue_Id = id_req.ue_Id
identity_resp.idType = s1ap_types.TFW_MID_TYPE_IMSI
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_IDENTITY_RESP,
identity_resp,
)
print(
"********************** Sent identity rsp for UE id",
id_req.ue_Id,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
auth_req = response.cast(s1ap_types.ueAuthReqInd_t)
print(
"********************** Received auth req for UE id",
auth_req.ue_Id,
)
# Send Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = auth_req.ue_Id
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
print("********************** Sent auth rsp for UE id", auth_req.ue_Id)
response = self._s1ap_wrapper.s1_util.get_response()
sec_mode_cmd = response.cast(s1ap_types.ueSecModeCmdInd_t)
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
print(
"********************** Received security mode cmd for UE id",
sec_mode_cmd.ue_Id,
)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = sec_mode_cmd.ue_Id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
print(
"********************** Sent security mode complete for UE id",
sec_mode_cmd.ue_Id,
)
# Receive initial context setup and attach accept indication
response = (self._s1ap_wrapper._s1_util.
receive_initial_ctxt_setup_and_attach_accept())
attach_acc = response.cast(s1ap_types.ueAttachAccept_t)
print(
"********************** Received attach accept for UE Id:",
attach_acc.ue_Id,
)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = attach_acc.ue_Id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE,
attach_complete,
)
print(
"********************** Sent attach complete for UE id",
attach_complete.ue_Id,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print(
"************************* Running UE detach for UE id ",
attach_complete.ue_Id,
)
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = attach_complete.ue_Id
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST,
detach_req,
)
# Wait for UE context release command
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
def test_attach_complete_after_ics_timer_expiry(self):
"""Simulating sending of attach complete msg after ICS timer expiry.
MME should discard attach complete message as it is already in the
process of implicit detach
### Do not add this TC to sanity suite ###
"""
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
# Trigger Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 1
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req,
)
print("****** Sent ATTACH_REQUEST")
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
print("****** Received AUTH_REQ_IND")
delay_init_ctxt_setup_resp = s1ap_types.UeDelayInitCtxtSetupRsp()
delay_init_ctxt_setup_resp.ue_Id = req.ue_id
delay_init_ctxt_setup_resp.flag = 1
delay_init_ctxt_setup_resp.tmrVal = 4500
print("*** Setting Initial Context Setup Resp Delay ***")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SET_DELAY_ICS_RSP, delay_init_ctxt_setup_resp,
)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP, auth_res,
)
print("****** Sent UE_AUTH_RESP")
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
print("****** Received UE_SEC_MOD_CMD_IND")
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete,
)
print("****** Sent UE_SEC_MOD_COMPLETE")
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
print("****** Received INT_CTX_SETUP_IND")
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value,
)
print("****** Received UE_ATTACH_ACCEPT_IND")
print("****** Sleeping for 4 seconds. Waiting for ICS timer to expire")
time.sleep(4)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE, attach_complete,
)
print("****** Sent ATTACH_COMPLETE")
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type, s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
print("****** Received UE_CTX_REL_IND")
def test_attach_complete_with_ActvDfltBearCtxtRej(self):
""" Test Attach test case for sending Activate Default
EPS Bearer Reject along with Attach Complete message """
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
# Trigger Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 1
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
print("********Triggering Attach Request ")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
msg = response.cast(s1ap_types.ueAttachAccept_t)
bid = msg.esmInfo.epsBearerId
# Trigger Attach Complete with
# Activate Default EPS Bearer Context Reject
time.sleep(0.2)
act_rej = s1ap_types.ueActvDfltEpsBearerCtxtRej_t()
act_rej.ue_Id = req.ue_id
act_rej.bearerId = bid
act_rej.esmCause = s1ap_types.TFW_EMM_CAUSE_REQ_REJ_UNSPECIFIED
# Activate Default EPS Bearer Context Reject sent along with
# Attach Complete message
# Attach Complete + Activate Default EPS Bearer Context Reject
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ACTV_DEFAULT_EPS_BEARER_CNTXT_REJECT, act_rej)
# Added delay to ensure S1APTester receives the emm information before
# sending the detach request message
time.sleep(0.5)
print("************************* Running UE detach")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = req.ue_id
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST, detach_req)
time.sleep(0.5)
def test_attach_outoforder_attach_cmp_icsrsp(self):
"""
Attach, Out of order attach complete and initial context setup response
"""
"""
Simulating this scenario by delaying ICS response message to change the
order of attach complete and ics resp
"""
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
# Trigger Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
pdn_type = s1ap_types.pdn_Type()
pdn_type.pres = True
pdn_type.pdn_type = 3
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
attach_req.pdnType_pr = pdn_type
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
delay_init_ctxt_setup_resp = s1ap_types.UeDelayInitCtxtSetupRsp()
delay_init_ctxt_setup_resp.ue_Id = req.ue_id
delay_init_ctxt_setup_resp.flag = 1
delay_init_ctxt_setup_resp.tmrVal = 2000
print("*** Setting Initial Context Setup Resp Delay ***")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SET_DELAY_ICS_RSP,
delay_init_ctxt_setup_resp,
)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value,
)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE,
attach_complete,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print(
"************************* Running UE detach for UE id ",
req.ue_id,
)
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = req.ue_id
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST,
detach_req,
)
# Wait for UE context release command
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
time.sleep(1)
def test_attach_detach_duplicate_nas_resp_messages(self):
""" Duplicate NAS Response Messages Test Case"""
# Ground work.
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
maxNasMsgRetransmission = 4
# Trigger Attach Request
attach_req = s1ap_types.ueAttachRequest_t()
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.ue_Id = req.ue_id
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
print("*** Triggering Attach Request ***")
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST, attach_req)
# Waiting for Authentication Request
# Wait for last Timer T3460 Expiry
for i in range(maxNasMsgRetransmission):
print(
"*** Waiting for Authentication Request Message (",
str(i + 1),
") ***",
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value)
print(
"*** Authentication Request Message Received (",
str(i + 1),
") ***",
)
# Trigger Authentication Response
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqnRecvd = s1ap_types.ueSqnRcvd_t()
sqnRecvd.pres = 0
auth_res.sqnRcvd = sqnRecvd
for i in range(maxNasMsgRetransmission):
print(
"*** Sending Authentication Response Message (",
str(i + 1),
") ***",
)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP, auth_res)
# Waiting for Security mode command
# Wait for last Timer T3460 Expiry
for i in range(maxNasMsgRetransmission):
print(
"*** Waiting for Security Mode Command Message (",
str(i + 1),
") ***",
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value)
print(
"*** Security Mode Command Message Received (",
str(i + 1),
") ***",
)
# Trigger Security Mode Complete
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
for i in range(maxNasMsgRetransmission):
print(
"*** Sending Security Mode Complete Message (",
str(i + 1),
") ***",
)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE, sec_mode_complete)
# Waiting for Attach accept
# Wait for last Timer T3450 Expiry
for i in range(maxNasMsgRetransmission):
print(
"*** Waiting for Attach Accept Message (",
str(i + 1),
") ***",
)
# Attach accept will be sent in ICSR only for the first time
# Re-transmitted Attach Accept will be sent in DL NAS transport
if i < 1:
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value)
print(
"*** Attach Accept Message Received (",
str(i + 1),
") ***",
)
# Trigger Attach Complete
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = req.ue_id
for i in range(maxNasMsgRetransmission):
print(
"*** Sending Attach Complete Message (",
str(i + 1),
") ***",
)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE, attach_complete)
print("*** Running UE detach ***")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = req.ue_id
detach_req.ueDetType = s1ap_types.ueDetachType_t.UE_NORMAL_DETACH.value
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST, detach_req)
def test_attach_with_multiple_mme_restarts(self):
num_ues = 1
self._s1ap_wrapper.configUEDevice(num_ues)
print("************************* Sending Attach Request for ue-id : 1")
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = 1
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
print("************************* Received UE_AUTH_REQ_IND")
# Try consecutive mme restarts
self._s1ap_wrapper.magmad_util.restart_mme_and_wait()
self._s1ap_wrapper.magmad_util.restart_mme_and_wait()
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = 1
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
print("************************* Sending Auth Response ue-id",
auth_res.ue_Id)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
print("************************* Received UE_SEC_MOD_CMD_IND")
self._s1ap_wrapper.magmad_util.restart_mme_and_wait()
print("************************* Sending UE_SEC_MOD_COMPLETE")
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.INT_CTX_SETUP_IND.value,
)
print("************************* Received INT_CTX_SETUP_IND")
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value,
)
print("************************* Received UE_ATTACH_ACCEPT_IND")
self._s1ap_wrapper.magmad_util.restart_mme_and_wait()
# Trigger Attach Complete
print("************************* Sending UE_ATTACH_COMPLETE")
attach_complete = s1ap_types.ueAttachComplete_t()
attach_complete.ue_Id = 1
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_COMPLETE,
attach_complete,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
print("************************* Running UE detach")
# Now detach the UE
detach_req = s1ap_types.uedetachReq_t()
detach_req.ue_Id = 1
detach_req.ueDetType = (
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value)
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_DETACH_REQUEST,
detach_req,
)
# Wait for UE context release command
return self._s1ap_wrapper.s1_util.get_response()
def test_no_attach_complete_with_mme_restart(self):
"""
Step 1: UE sends Attach Request, receives Attach Accept and UE shall
not respond to mme
Step 2: After sending Attach Accept, mme runs 3450 timer, while timer
is running, mme restarts.
Step 3: On mme recovery, mme sends Detach Request with re-attach
required, S1ap shall send Detach Accept and release the UE
contexts
Step 4: Once again attach UE to network
"""
self._s1ap_wrapper.configIpBlock()
self._s1ap_wrapper.configUEDevice(1)
req = self._s1ap_wrapper.ue_req
print(
"************************* Running attach setup timer expiry test",
)
attach_req = s1ap_types.ueAttachRequest_t()
attach_req.ue_Id = req.ue_id
sec_ctxt = s1ap_types.TFW_CREATE_NEW_SECURITY_CONTEXT
id_type = s1ap_types.TFW_MID_TYPE_IMSI
eps_type = s1ap_types.TFW_EPS_ATTACH_TYPE_EPS_ATTACH
attach_req.mIdType = id_type
attach_req.epsAttachType = eps_type
attach_req.useOldSecCtxt = sec_ctxt
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_ATTACH_REQUEST,
attach_req,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_AUTH_REQ_IND.value,
)
auth_res = s1ap_types.ueAuthResp_t()
auth_res.ue_Id = req.ue_id
sqn_recvd = s1ap_types.ueSqnRcvd_t()
sqn_recvd.pres = 0
auth_res.sqnRcvd = sqn_recvd
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_AUTH_RESP,
auth_res,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_SEC_MOD_CMD_IND.value,
)
sec_mode_complete = s1ap_types.ueSecModeComplete_t()
sec_mode_complete.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_SEC_MOD_COMPLETE,
sec_mode_complete,
)
# Receive initial context setup and attach accept indication
response = (
self._s1ap_wrapper._s1_util
.receive_initial_ctxt_setup_and_attach_accept()
)
attach_acc = response.cast(s1ap_types.ueAttachAccept_t)
print(
"********************** Received attach accept for UE Id:",
attach_acc.ue_Id,
)
print(
"************************* Restarting MME service on",
"gateway",
)
self._s1ap_wrapper.magmad_util.restart_services(["mme"])
for j in range(20):
print("Waiting for", j, "seconds")
time.sleep(1)
# Receive NW initiated detach request
response = self._s1ap_wrapper.s1_util.get_response()
while response.msg_type == s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND.value:
print(
"Received Attach Accept retransmission from before restart",
"Ignoring...",
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_NW_INIT_DETACH_REQUEST.value,
)
nw_init_detach_req = response.cast(s1ap_types.ueNwInitdetachReq_t)
print(
"**************** Received NW initiated Detach Req with detach "
"type set to ",
nw_init_detach_req.Type,
)
self.assertEqual(
nw_init_detach_req.Type,
s1ap_types.ueNwInitDetType_t.TFW_RE_ATTACH_REQUIRED.value,
)
print("**************** Sending Detach Accept")
# Send detach accept
detach_accept = s1ap_types.ueTrigDetachAcceptInd_t()
detach_accept.ue_Id = req.ue_id
self._s1ap_wrapper._s1_util.issue_cmd(
s1ap_types.tfwCmd.UE_TRIGGERED_DETACH_ACCEPT,
detach_accept,
)
# Wait for UE context release command
response = self._s1ap_wrapper.s1_util.get_response()
# Ignore retransmitted NW Initiated Detach Request messages.
# This test waits for a couple of seconds after the MME restart, but most
# of the time MME comes up early after the restart and retransmits multiple
# NW Initiated Detach Request messages on T3422 Timer expiry.
while (
response.msg_type
== s1ap_types.tfwCmd.UE_NW_INIT_DETACH_REQUEST.value
):
nw_init_detach_req = response.cast(s1ap_types.ueNwInitdetachReq_t)
print(
"**************** Received retransmitted NW Initiated Detach "
"Req with detach type set to",
nw_init_detach_req.Type,
"Ignoring...",
)
self.assertEqual(
nw_init_detach_req.Type,
s1ap_types.ueNwInitDetType_t.TFW_RE_ATTACH_REQUIRED.value,
)
response = self._s1ap_wrapper.s1_util.get_response()
self.assertEqual(
response.msg_type,
s1ap_types.tfwCmd.UE_CTX_REL_IND.value,
)
print("****** Received Ue context release command *********")
print("****** Triggering end-end attach after mme restart *********")
self._s1ap_wrapper.s1_util.attach(
req.ue_id,
s1ap_types.tfwCmd.UE_END_TO_END_ATTACH_REQUEST,
s1ap_types.tfwCmd.UE_ATTACH_ACCEPT_IND,
s1ap_types.ueAttachAccept_t,
)
# Wait on EMM Information from MME
self._s1ap_wrapper._s1_util.receive_emm_info()
# Now detach the UE
self._s1ap_wrapper.s1_util.detach(
req.ue_id,
s1ap_types.ueDetachType_t.UE_SWITCHOFF_DETACH.value,
wait_for_s1_ctxt_release=False,
)
