def main(argv):
"""A simple scripts to set baseline grid and matching guides."""
CurrentUnit = scribus.getUnit()
scribus.setUnit(0)
H_Guides = []
GuideHeight = float(scribus.valueDialog('Set BaseLine Grid & Guides', 'Enter value for Grid and Guide Height (pt).', '14.40') )
GuideOffset = float(scribus.valueDialog('Set Grid & Guide Offsets', 'Enter value for Grid and Guide Offset (pt).', '0.0') )
PageWidth, PageHeight = scribus.getPageSize()
NumLoops = math.floor(1 + (PageHeight - GuideOffset) / GuideHeight)
for i in range(int(NumLoops)):
if i > 0:
H_Guides.append(GuideOffset + i * GuideHeight)
scribus.setBaseLine(GuideHeight, GuideOffset)
scribus.setHGuides(scribus.getHGuides() + H_Guides)
scribus.setUnit(CurrentUnit)
scribus.messageBox('Script', '<h3>Script by ugajin</h3><p>Thanks a bunch for using setBaselineGuides and Scribus!</p><p>[email protected]</p>', scribus.ICON_INFORMATION, scribus.BUTTON_OK, scribus.BUTTON_CANCEL)
def addWatermark (self) :
'''Create a Draft watermark layer. This was taken from:
http://wiki.scribus.net/canvas/Adding_%27DRAFT%27_to_a_document'''
L = len(self.watermark) # The length of the word
# will determine the font size
scribus.defineColor("gray", 11, 11, 11, 11) # Set your own color here
u = scribus.getUnit() # Get the units of the document
al = scribus.getActiveLayer() # Identify the working layer
scribus.setUnit(scribus.UNIT_MILLIMETERS) # Set the document units to mm,
(w,h) = scribus.getPageSize() # needed to set the text box size
scribus.createLayer("c")
scribus.setActiveLayer("c")
T = scribus.createText(w/6, 6*h/10 , h, w/2) # Create the text box
scribus.setText(self.watermark, T) # Insert the text
scribus.setTextColor("gray", T) # Set the color of the text
scribus.setFontSize((w/210)*(180 - 10*L), T) # Set the font size according to length and width
scribus.rotateObject(45, T) # Turn it round antclockwise 45 degrees
scribus.setUnit(u) # return to original document units
# FIXME: It would be nice if we could move the watermark box down to the lowest layer so
# that it is under all the page text. Have not found a method to do this. For now we just
# plop the watermark on top of everything else.
scribus.setActiveLayer(al) # return to the original active layer
def copyPlayer(sourceName, destinationName):
if scribus.objectExists(sourceName):
doc = scribus.getDocName()
unit = scribus.getUnit()
(PageWidth, PageHeight) = scribus.getPageSize()
(iT, iI, iO, iB) = scribus.getPageMargins()
NewPagepoint = PageHeight - iT - iB
player = scribus.selectObject(sourceName)
#Duplicate the object...
scribus.duplicateObject(sourceName)
x = scribus.getSelectedObject()
newObjectName = str(x)
size = scribus.getSize(newObjectName)
scribus.moveObject(0, size[1], newObjectName)
(x, y) = scribus.getPosition(newObjectName)
scribus.setRedraw(1)
scribus.docChanged(1)
if (y + size[1] > NewPagepoint):
currentPage = scribus.currentPage()
scribus.newPage(-1)
newPage = currentPage + 1
scribus.copyObject(newObjectName)
scribus.deleteObject(newObjectName)
scribus.gotoPage(newPage)
scribus.pasteObject(newObjectName)
scribus.moveObjectAbs(iO, iT, newObjectName)
scribus.setNewName(destinationName, sourceName)
scribus.setNewName(sourceName, newObjectName)
def addWatermark(self):
'''Create a Draft watermark layer. This was taken from:
http://wiki.scribus.net/canvas/Adding_%27DRAFT%27_to_a_document'''
L = len(self.watermark) # The length of the word
# will determine the font size
scribus.defineColor("gray", 11, 11, 11, 11) # Set your own color here
u = scribus.getUnit() # Get the units of the document
al = scribus.getActiveLayer() # Identify the working layer
scribus.setUnit(
scribus.UNIT_MILLIMETERS) # Set the document units to mm,
(w, h) = scribus.getPageSize() # needed to set the text box size
scribus.createLayer("c")
scribus.setActiveLayer("c")
T = scribus.createText(w / 6, 6 * h / 10, h,
w / 2) # Create the text box
scribus.setText(self.watermark, T) # Insert the text
scribus.setTextColor("gray", T) # Set the color of the text
scribus.setFontSize(
(w / 210) * (180 - 10 * L),
T) # Set the font size according to length and width
scribus.rotateObject(45, T) # Turn it round antclockwise 45 degrees
scribus.setUnit(u) # return to original document units
# FIXME: It would be nice if we could move the watermark box down to the lowest layer so
# that it is under all the page text. Have not found a method to do this. For now we just
# plop the watermark on top of everything else.
scribus.setActiveLayer(al) # return to the original active layer
def main(argv):
"""A simple scripts to set baseline grid and matching guides."""
CurrentUnit = scribus.getUnit()
scribus.setUnit(0)
H_Guides = []
GuideHeight = float(
scribus.valueDialog('Set BaseLine Grid & Guides',
'Enter value for Grid and Guide Height (pt).',
'14.40'))
GuideOffset = float(
scribus.valueDialog('Set Grid & Guide Offsets',
'Enter value for Grid and Guide Offset (pt).',
'0.0'))
PageWidth, PageHeight = scribus.getPageSize()
NumLoops = math.floor(1 + (PageHeight - GuideOffset) / GuideHeight)
for i in range(int(NumLoops)):
if i > 0:
H_Guides.append(GuideOffset + i * GuideHeight)
scribus.setBaseLine(GuideHeight, GuideOffset)
scribus.setHGuides(scribus.getHGuides() + H_Guides)
scribus.setUnit(CurrentUnit)
scribus.messageBox(
'Script',
'<h3>Script by ugajin</h3><p>Thanks a bunch for using setBaselineGuides and Scribus!</p><p>[email protected]</p>',
scribus.ICON_INFORMATION, scribus.BUTTON_OK, scribus.BUTTON_CANCEL)
def main(argv):
"""This is a documentation string. Write a description of what your code
does here. You should generally put documentation strings ("docstrings")
on all your Python functions."""
#########################
# YOUR CODE GOES HERE #
#########################
userdim = scribus.getUnit() # get unit and change it to mm
scribus.setUnit(scribus.UNIT_MILLIMETERS)
cellwidthleft = 0
cellwidthright = 0
cellHeight = 0
pos = getPosition()
while cellwidthleft <= 0:
cellwidthL = scribus.valueDialog("Left Cell Width", "How wide (mm) do you wish left cells to be?", "30.0")
cellwidthleft = float(cellwidthL)
while cellwidthright <= 0:
cellwidthR = scribus.valueDialog("Right Cell Width", "How wide (mm) do you wish right cells to be?", "30.0")
cellwidthright = float(cellwidthR)
while cellHeight <= 0:
cellheight = scribus.valueDialog("Cell Height", "How tall (mm) do you wish cells to be?", "10.0")
cellHeight = float(cellheight)
data = getCSVdata()
di = getDataInformation(data)
hposition = pos[1]
vposition = pos[0]
objectlist = [] # here we keep a record of all the created textboxes so we can group them later
i = 0
scribus.progressTotal(len(data))
scribus.setRedraw(False)
for row in data:
c = 0
for cell in row:
cell = cell.strip()
cellsize = cellwidthleft
if c == 1:
cellsize = cellwidthright
textbox = scribus.createText(hposition, vposition, cellsize, cellHeight) # create a textbox
objectlist.append(textbox)
scribus.insertText(cell, 0, textbox) # insert the text into the textbox
hposition = hposition + cellwidthleft # move the position for the next cell
c = 1
vposition = vposition + cellHeight # set vertical position for next row
hposition = pos[1] # reset vertical position for next row
i = i + 1
scribus.progressSet(i)
scribus.groupObjects(objectlist)
scribus.progressReset()
scribus.setUnit(userdim) # reset unit to previous value
scribus.docChanged(True)
scribus.statusMessage("Done")
scribus.setRedraw(True)
def alignImage(self):
if scribus.haveDoc():
restore_units = scribus.getUnit(
) # since there is an issue with units other than points,
scribus.setUnit(0) # we switch to points then restore later.
nbrSelected = scribus.selectionCount()
objList = []
for i in range(nbrSelected):
objList.append(scribus.getSelectedObject(i))
scribus.deselectAll()
for i in range(nbrSelected):
try:
obj = objList[i]
scribus.selectObject(obj)
frameW, frameH = scribus.getSize(obj)
saveScaleX, saveScaleY = scribus.getImageScale(obj)
scribus.setScaleImageToFrame(1, 0, obj)
fullScaleX, fullScaleY = scribus.getImageScale(obj)
scribus.setScaleImageToFrame(0, 0, obj)
scribus.setImageScale(saveScaleX, saveScaleY, obj)
imageW = frameW * (saveScaleX / fullScaleX)
imageH = frameH * (saveScaleY / fullScaleY)
imageX = 0.0
imageY = 0.0
if self.alignVar.get()[0] == "T":
imageY = 0.0
elif self.alignVar.get()[0] == "M":
imageY = (frameH - imageH) / 2.0
elif self.alignVar.get()[0] == "B":
imageY = (frameH - imageH)
if self.alignVar.get()[1] == "L":
imageX = 0.0
elif self.alignVar.get()[1] == "C":
imageX = (frameW - imageW) / 2.0
elif self.alignVar.get()[1] == "R":
imageX = (frameW - imageW)
scribus.setImageOffset(imageX, imageY, obj)
scribus.docChanged(1)
scribus.setRedraw(True)
scribus.deselectAll()
except:
nothing = "nothing"
scribus.setUnit(restore_units)
self.master.destroy()
def alignImage(self):
if scribus.haveDoc():
restore_units = scribus.getUnit() # since there is an issue with units other than points,
scribus.setUnit(0) # we switch to points then restore later.
nbrSelected = scribus.selectionCount()
objList = []
for i in range(nbrSelected):
objList.append(scribus.getSelectedObject(i))
scribus.deselectAll()
for i in range(nbrSelected):
try:
obj = objList[i]
scribus.selectObject(obj)
frameW, frameH = scribus.getSize(obj)
saveScaleX, saveScaleY = scribus.getImageScale(obj)
scribus.setScaleImageToFrame(1, 0, obj)
fullScaleX, fullScaleY = scribus.getImageScale(obj)
scribus.setScaleImageToFrame(0, 0, obj)
scribus.setImageScale(saveScaleX, saveScaleY, obj)
imageW = frameW * (saveScaleX / fullScaleX)
imageH = frameH * (saveScaleY / fullScaleY)
imageX = 0.0
imageY = 0.0
if self.alignVar.get()[0] == "T":
imageY = 0.0
elif self.alignVar.get()[0] == "M":
imageY = (frameH - imageH) / 2.0
elif self.alignVar.get()[0] == "B":
imageY = (frameH - imageH)
if self.alignVar.get()[1] == "L":
imageX = 0.0
elif self.alignVar.get()[1] == "C":
imageX = (frameW - imageW) / 2.0
elif self.alignVar.get()[1] == "R":
imageX = (frameW - imageW)
scribus.setImageOffset(imageX, imageY, obj)
scribus.docChanged(1)
scribus.setRedraw(True)
scribus.deselectAll()
except:
nothing = "nothing"
scribus.setUnit(restore_units)
self.master.destroy()
def create(argv):
"""
- create a page using the "badge" master page.
- add the text field with the name
- add the text with the role in the project
"""
#########################
# YOUR CODE GOES HERE #
#########################
userdim=scribus.getUnit() #get unit and change it to mm
scribus.setUnit(scribus.UNIT_POINTS)
data = getCSVdata()
scribus.progressTotal(len(data)+1)
scribus.setRedraw(False)
i = 0;
#Select Output Directory and define some Vars based on it.
#baseDirName = scribus.fileDialog("Rosenlehrpfad - Wahl des Ausgabeverzeichnisses", "*","./" ,False, False, True)
baseDirName = os.path.abspath("./output")
tmpFileName = os.path.join(baseDirName, "tmp.sla")
idtextstring = "Rosenid"
gertextstring = "RosentextDeutsch"
lattextstring = "RosentextLatein"
if not os.path.exists(baseDirName):
os.makedirs(baseDirName)
else:
for the_file in os.listdir(baseDirName):
file_path = os.path.join(baseDirName, the_file)
try:
if os.path.isfile(file_path):
os.unlink(file_path)
except Exception, e:
print e
def main(argv):
unit = scribus.getUnit()
units = [' pts', 'mm', ' inches', ' picas', 'cm', ' ciceros']
unitlabel = units[unit]
if scribus.selectionCount() == 0:
scribus.messageBox(
'Scribus - Script Error',
"There is no object selected.\nPlease select a text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
if scribus.selectionCount() > 1:
scribus.messageBox(
'Scribus - Script Error',
"You have more than one object selected.\nPlease select one text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
textbox = scribus.getSelectedObject()
pageitems = scribus.getPageItems()
boxcount = 1
for item in pageitems:
if (item[0] == textbox):
if (item[1] != 4):
scribus.messageBox('Scribus - Script Error',
"This is not a textframe. Try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
# While we're finding out what kind of frame is selected, we'll also make sure we
# will come up with a unique name for our infobox frame - it's possible we may want
# more than one for a multicolumn frame.
if (item[0] == ("infobox" + str(boxcount) + textbox)):
boxcount += 1
left, top = scribus.getPosition(textbox)
o_width, o_height = scribus.getSize(textbox)
o_cols = int(scribus.getColumns(textbox))
o_gap = scribus.getColumnGap(textbox)
columns_width = 0
column_pos = 0
o_colwidth = (o_width - ((o_cols - 1) * o_gap)) / o_cols
if (o_cols > 1):
while (columns_width > o_cols or columns_width < 1):
columns_width = scribus.valueDialog(
'Width', 'How many columns width shall the ' + 'box be (max ' +
str(o_cols) + ')?', '1')
columns_width = int(columns_width)
if (columns_width < o_cols):
max = o_cols - columns_width
while (column_pos <= max and column_pos <= 1):
column_pos = scribus.valueDialog(
'Placement', 'In which column do you want '
'to place the box (1 to ' + str(o_cols) + ')?', '1')
column_pos = int(column_pos) - 1
if (o_cols == 1):
columns_width = 1
new_height = 0
while (new_height <= 0):
new_height = scribus.valueDialog(
'Height', 'Your frame height is ' + str(o_height) + unitlabel +
'. How tall\n do you want your ' + 'infobox to be in ' +
unitlabel +
'?\n If you load an image with the script, height will be\n calculated, so the value here will not\n matter in that case.',
str(o_height))
if (not new_height):
sys.exit(0)
new_height = float(new_height)
new_top = -1
while (new_top < 0):
new_top = scribus.valueDialog(
'Y-Pos',
'The top of your infobox is currently\n' + str(top) + unitlabel +
'. Where do you want \n' + 'the top to be in ' + unitlabel + '?',
str(top))
if (not new_top):
sys.exit(0)
new_top = float(new_top)
framename = scribus.valueDialog(
'Name of Frame', 'Name your frame or use this default name',
"infobox" + str(boxcount) + textbox)
if (not framename):
sys.exit(0)
frametype = 'text'
frametype = scribus.valueDialog(
'Frame Type',
'Change to anything other\n than "text" for image frame.\nEnter "imageL" to also load an image',
frametype)
if (not frametype):
sys.exit(0)
new_width = columns_width * o_colwidth + (columns_width - 1) * o_gap
new_left = left + ((column_pos) * o_colwidth) + ((column_pos) * o_gap)
if (frametype == 'text'):
new_textbox = scribus.createText(new_left, float(new_top), new_width,
float(new_height), framename)
scribus.setColumnGap(0, new_textbox)
scribus.setColumns(1, new_textbox)
scribus.textFlowMode(new_textbox, 1)
else:
if (frametype == 'imageL'):
imageload = scribus.fileDialog(
'Load image',
'Images(*.jpg *.png *.tif *.JPG *.PNG *.jpeg *.JPEG *.TIF)',
haspreview=1)
new_image = scribus.createImage(new_left,
float(new_top), new_width,
float(new_height), framename)
scribus.textFlowMode(new_image, 1)
scribus.loadImage(imageload, new_image)
scribus.setScaleImageToFrame(1, 0, new_image)
currwidth, currheight = scribus.getSize(new_image)
Xscale, Yscale = scribus.getImageScale(new_image)
if (Xscale != Yscale):
scribus.sizeObject(currwidth, currheight * Xscale / Yscale,
new_image)
scribus.setScaleImageToFrame(1, 1, new_image)
else:
new_image = scribus.createImage(new_left,
float(new_top), new_width,
float(new_height), framename)
scribus.textFlowMode(new_image, 1)
scribus.setScaleImageToFrame(1, 1, new_image)
sys.exit(1)
numselect = scribus.selectionCount()
count = 0
frames = []
if numselect == 0:
scribus.messageBox('Selection Count', "You must have at least one object selected",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
captionloc = scribus.valueDialog("Caption Location","Where to put the caption(s) -\n B/T/R/L?", "b")
captionloc = captionloc[0]
location = captionloc.upper()
pageunits = scribus.getUnit()
scribus.setUnit(scribus.UNIT_POINTS)
while count < numselect:
frames.append(scribus.getSelectedObject(count))
count += 1
for frame in frames:
fwidth, fheight = scribus.getSize(frame)
fx, fy = scribus.getPosition(frame)
if location == "B":
textf = scribus.createText(fx, fy+fheight, fwidth, 24)
elif location == "T":
textf = scribus.createText(fx, fy-24, fwidth, 24)
elif location == "R":
textf = scribus.createText(fx + fwidth, fy, 150, 40)
def debug(label, value=''):
if False:
print label + ' ' + str(value)
debug("############")
# this script makes no sense without a document open
if not scribus.haveDoc():
scribus.messageBox('Scribus - Script Error', "No document open",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(1)
# environment initialization
unit_current = scribus.getUnit() #get unit and change it to mm
scribus.setUnit(scribus.UNIT_MILLIMETERS)
# some ratios for calculations
pt_to_mm_ratio = 3.528 / 10.0
cell_ratio = 2.0 / 3 # or 3/2
# input values
column_count = scribus.valueDialog(
'Number of columns',
'Please set the number of columns\n(sane values are 6, 9, 12, 24)', '6')
column_count = get_int_from_dialog_value(column_count)
font_size_main_text = scribus.valueDialog(
'Text size',
def main(argv):
"""This is a documentation string. Write a description of what your code
does here. You should generally put documentation strings ("docstrings")
on all your Python functions."""
#########################
# YOUR CODE GOES HERE #
#########################
userdim = scribus.getUnit() #get unit and change it to mm
scribus.setUnit(scribus.UNIT_MILLIMETERS)
cellwidthleft = 0
cellwidthright = 0
cellHeight = 0
pos = getPosition()
while cellwidthleft <= 0:
cellwidthL = scribus.valueDialog(
'Left Cell Width', 'How wide (mm) do you wish left cells to be?',
'30.0')
cellwidthleft = float(cellwidthL)
while cellwidthright <= 0:
cellwidthR = scribus.valueDialog(
'Right Cell Width', 'How wide (mm) do you wish right cells to be?',
'30.0')
cellwidthright = float(cellwidthR)
while cellHeight <= 0:
cellheight = scribus.valueDialog(
'Cell Height', 'How tall (mm) do you wish cells to be?', '10.0')
cellHeight = float(cellheight)
data = getCSVdata()
di = getDataInformation(data)
hposition = pos[1]
vposition = pos[0]
objectlist = [
] # here we keep a record of all the created textboxes so we can group them later
i = 0
scribus.progressTotal(len(data))
scribus.setRedraw(False)
for row in data:
c = 0
for cell in row:
cell = cell.strip()
cellsize = cellwidthleft
if c == 1: cellsize = cellwidthright
textbox = scribus.createText(hposition, vposition, cellsize,
cellHeight) #create a textbox
objectlist.append(textbox)
scribus.insertText(cell, 0,
textbox) #insert the text into the textbox
hposition = hposition + cellwidthleft #move the position for the next cell
c = 1
vposition = vposition + cellHeight #set vertical position for next row
hposition = pos[1] #reset vertical position for next row
i = i + 1
scribus.progressSet(i)
scribus.groupObjects(objectlist)
scribus.progressReset()
scribus.setUnit(userdim) # reset unit to previous value
scribus.docChanged(True)
scribus.statusMessage("Done")
scribus.setRedraw(True)
def generateContent(string, window):
#generates all the elements/only one element
start = 0
end = 0
if string == "all":
#dont include the first line to make the data sort work [1:]
#sort the the elements by date
data = sorted(getCSVdata()[1:],
key=lambda row: dateFun(str.strip(row[5])),
reverse=True)
end = len(data)
print(str(end) + " " + str(start))
print("generating elements from all lines")
window.destroy()
elif RepresentsInt(string):
start = int(string) - 1 #index shifting
end = int(string)
print("only generating line " + string)
data = getCSVdata()
window.destroy()
else:
print(string + " is not a valid value")
print("exiting")
window.destroy()
sys.exit()
if not scribus.haveDoc() > 0: #do we have a doc?
scribus.messageBox("importcvs2table",
"No opened document.\nPlease open one first.")
sys.exit()
userdim = scribus.getUnit() #get unit and change it to mm
scribus.setUnit(scribus.UNIT_MILLIMETERS)
lineWidth = 3.92 #aka 1.383mm, kp warum
rowDate = ""
for i in range(start, end):
rowName = str.strip(data[i][0])
rowCategory = str.strip(data[i][1])
rowDescription = str.strip(data[i][2])
rowPrice = str.strip(data[i][3])
rowPlace = str.strip(data[i][4])
rowDate = str.strip(data[i][5])
rowTime = str.strip(data[i][6])
if rowName == "": #skip empty csv lines
continue
print("add element: " + rowName)
#random values
hpos = 120.0
vpos = 200.0
hposition = 120.0
vposition = 200.0
objectlist = [] #list for all boxes
x = 0 #sets the progress
#create the blue box
print("create the blue line")
blueBox = scribus.createLine(hposition + 1, vposition, hposition + 1,
vposition + 5.863)
scribus.setLineColor("Cyan", blueBox)
scribus.setLineWidth(lineWidth, blueBox)
objectlist.append(blueBox)
scribus.progressSet(x)
x = 1
#create the data character box
#these are the width values for the numbers
zero = 4.608
one = 2.839
two = 4.724
three = 4.393
four = 4.625
five = 4.261
six = 4.278
seven = 4.261
eight = 4.625
nine = 4.708
lenArray = [zero, one, two, three, four, five, six, seven, eight, nine]
marginleft = 1.3
margintop = 0.519 #substract, cause the box is heigher that the blue line
cellwidthright = 10.951
cellHeight = 8.282
hposition = hposition + marginleft + 1
textbox = scribus.createText(hposition, vposition - margintop,
cellwidthright, cellHeight)
scribus.setFont("Quicksand Regular", textbox)
scribus.setFontSize(20.0, textbox)
finalDate = ""
rowDateLength = 0
#checks if the rowDate is from 01-09, in that case remove the zero
if rowDate[0] == '0':
finalDate = rowDate[1]
rowDateLength = lenArray[int(rowDate[1])]
else:
finalDate = rowDate[:2]
rowDateLength = lenArray[int(rowDate[0])] + lenArray[int(
rowDate[1])]
scribus.insertText(finalDate, 0, textbox)
print("day: " + finalDate)
objectlist.append(textbox)
scribus.progressSet(x)
x = 2
#create the month/day box
print("create the box with the day and month")
width = 19.447
height = 8.025
marginleft = rowDateLength #gain that from the calculations above, depends on the width of the rowDate characters
monthBox = scribus.createText(hposition + marginleft + 0.7, vposition,
width, height)
scribus.setFont("Quicksand Regular", monthBox)
scribus.setFontSize(8.5, monthBox)
month = ""
m = rowDate[3:5]
if m == '01':
month = "Januar"
elif m == '02':
month = "Februar"
elif m == '03':
month = "März"
elif m == '04':
month = "April"
elif m == '05':
month = "Mai"
elif m == '06':
month = "Juni"
elif m == '07':
month = "Juli"
elif m == '08':
month = "August"
elif m == '09':
month = "September"
elif m == '10':
month = "Oktober"
elif m == '11':
month = "November"
elif m == '12':
month = "Dezember"
else:
print("cant determine month!")
day = datetime.date(int(rowDate[6:]), int(m),
int(rowDate[:2])).weekday()
dayName = ""
if day == 0:
dayName = "Montag"
elif day == 1:
dayName = "Dienstag"
elif day == 2:
dayName = "Mittwoch"
elif day == 3:
dayName = "Donnerstag"
elif day == 4:
dayName = "Freitag"
elif day == 5:
dayName = "Samstag"
elif day == 6:
dayName = "Sonntag"
else:
print("cant determine day!")
text = month + "\n" + dayName
scribus.setStyle("Kalender_neu_Monat und Tag", monthBox)
scribus.insertText(text, 0, monthBox)
print("month: " + month + " day: " + dayName)
objectlist.append(monthBox)
scribus.progressSet(x)
x = 3
#create the main text box
print("create the main text box")
margintop = 5.5
hpos = hpos - 0.383 #i dont know why but scribus always places the element 0.383 right than it should be :/
mainTextBox = scribus.createText(
hpos, vposition + margintop, 43.0,
45.0) #minus eins weil der blaue balken seinen kasten overflowed
#insert category
print("insert the category: " + rowCategory)
scribus.insertText(rowCategory, 0, mainTextBox)
endCategory = scribus.getTextLength(mainTextBox)
scribus.selectText(0, endCategory, mainTextBox)
scribus.setFontSize(10.5, mainTextBox)
scribus.selectText(0, endCategory, mainTextBox)
scribus.setStyle("Kalender_Eventname", mainTextBox)
#insert main text
print("insert the main text")
scribus.insertText("\n" + rowDescription, endCategory, mainTextBox)
endMainText = scribus.getTextLength(mainTextBox) - endCategory
scribus.selectText(endCategory, endMainText, mainTextBox)
scribus.setStyle("Kalender_Eventbeschreibung", mainTextBox)
#get start length to color everything black and set font size
startAll = scribus.getTextLength(mainTextBox)
createPlaceTimePrice(mainTextBox, "\n| Ort: ", "",
"Kalender_Eventname")
#insert value for place
createPlaceTimePrice(mainTextBox, rowPlace, "Heuristica Regular", "")
#insert time letters
createPlaceTimePrice(mainTextBox, " | Zeit: ", "Quicksand Regular", "")
#insert time value
createPlaceTimePrice(mainTextBox, rowTime, "Heuristica Regular", "")
#insert price letters
createPlaceTimePrice(mainTextBox, " | Eintritt: ", "Quicksand Regular",
"")
#insert price value
createPlaceTimePrice(mainTextBox, rowPrice, "Heuristica Regular", "")
#setFontSize and black color for the whole detail box
endAll = scribus.getTextLength(mainTextBox) - startAll
scribus.selectText(startAll, endAll, mainTextBox)
scribus.setFontSize(8.5, mainTextBox)
scribus.selectText(startAll, endAll, mainTextBox)
scribus.setTextColor("Black", mainTextBox)
objectlist.append(mainTextBox)
scribus.progressSet(x)
#do some generell stuff
scribus.groupObjects(objectlist)
scribus.progressReset()
scribus.setUnit(userdim) # reset unit to previous value
scribus.docChanged(True)
scribus.statusMessage("Done")
scribus.setRedraw(True)
print("done")
return 0
def main(argv):
unit = scribus.getUnit()
units = [' pts','mm',' inches',' picas','cm',' ciceros']
unitlabel = units[unit]
if scribus.selectionCount() == 0:
scribus.messageBox('Scribus - Script Error',
"There is no object selected.\nPlease select a text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
if scribus.selectionCount() > 1:
scribus.messageBox('Scribus - Script Error',
"You have more than one object selected.\nPlease select one text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
textbox = scribus.getSelectedObject()
pageitems = scribus.getPageItems()
boxcount = 1
for item in pageitems:
if (item[0] == textbox):
if (item[1] != 4):
scribus.messageBox('Scribus - Script Error',
"This is not a textframe. Try again.", scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
# While we're finding out what kind of frame is selected, we'll also make sure we
# will come up with a unique name for our infobox frame - it's possible we may want
# more than one for a multicolumn frame.
if (item[0] == ("infobox" + str(boxcount) + textbox)):
boxcount += 1
elem = textbox;
pathUp = '';
pathUpShort = "";
while elem != None:
elemId = getElemId(elem);
pElemId = getParentElemId(elem);
text = scribus.getText(elem);
if (text.find("Holder")!=-1):
text = "";
pathUpShort = "<" + getElemName(elem) + " id=\"" + str(getElemId(elem)) + "\">" + text + "\n" + pathUpShort;
pathUp = dumpElem(elem) + " // " + pathUp;
elem = findElemById(pElemId);
if (pathUp != ''):
pathUp = pathUp[0:len(pathUp)-4];
if (pathUpShort != ''):
pathUpShort = pathUpShort[0:len(pathUpShort)-1];
#framename = scribus.valueDialog('XML Tree','XML Tree', elemName + '[@id=' + elemId + '] parent: ' + parent + ' text:' + text + "," + parent)
#scribus.messagebarText("It works !!!");
scribus.statusMessage(pathUp);
#scribus.zoomDocument(200);
#scribus.selectFrameText(0,100);
#framename = scribus.valueDialog('XML Tree','XML Tree (Path UP)', pathUp);
#t = scribus.qApp.mainWidget();
#if (not framename) :
# sys.exit(0)
#scribus.messageBox('XML struct',
# pathUp + "\n\n" + pathUpShort,
# scribus.ICON_WARNING, scribus.BUTTON_OK)
#impl = getDOMImplementation();
#newdoc = impl.createDocument(None, "root", None);
newdoc = createDOMDocument();
#xmlelem = createDOMElement(newdoc, root);
#newdoc.documentElement.appendChild(xmlelem);
x = newdoc.toxml();
#x = str(dir(root));
scribus.structview(x);
if not scribus.haveDoc():
scribus.messageBox('Usage Error',
'You need a Document open',
icon=0,
button1=1)
sys.exit(2)
if scribus.selectionCount() == 0:
scribus.messageBox('Usage Error',
'You need to select a frame',
icon=0,
button1=1)
sys.exit(2)
unit = scribus.getUnit()
scribus.setUnit(unit)
scribus.setUnit(scribus.UNIT_MILLIMETERS)
item = scribus.getSelectedObject()
size = scribus.getSize(item)
position = scribus.getPosition(item)
thickness = 3
items_border = []
items_border.append(
scribus.createRect(position[0], position[1], size[0], thickness))
items_border.append(
scribus.createRect(position[0], position[1], thickness, size[1]))
def main(argv):
unit = scribus.getUnit()
units = ['pts','mm','inches','picas','cm','ciceros']
unitlabel = units[unit]
# get page size
pagesize = scribus.getPageSize()
# ask for layout style
layout_style = scribus.valueDialog("Select Mirror", layout_text, "v")
if layout_style == "":
sys.exit()
# v = vertical mirror
if layout_style == "v":
# warn and exit if no selection
if scribus.selectionCount() == 0:
scribus.messageBox("Error", "Select an object first!", icon=scribus.ICON_WARNING)
sys.exit()
#create mirror guides
scribus.setVGuides(scribus.getHGuides() + [pagesize[0]/2])
#get selected object
selection_name = scribus.getSelectedObject(0)
objectpos = scribus.getPosition(selection_name)
objectsize = scribus.getSize(selection_name)
#duplicate object
scribus.duplicateObject(selection_name)
#move object
newobjectpos = (pagesize[0] - (objectpos[0] + objectsize[0]) , objectpos[1])
scribus.moveObjectAbs(newobjectpos[0], objectpos[1], selection_name)
#flip object
scribus.flipObject(1,0,selection_name)
# h = horizontal mirror
if layout_style == "h":
# warn and exit if no selection
if scribus.selectionCount() == 0:
scribus.messageBox("Error", "Select an object first!", icon=scribus.ICON_WARNING)
sys.exit()
#create mirror guides
scribus.setHGuides(scribus.getHGuides() + [pagesize[1]/2])
#get selected object
selection_name = scribus.getSelectedObject(0)
objectpos = scribus.getPosition(selection_name)
objectsize = scribus.getSize(selection_name)
#duplicate object
scribus.duplicateObject(selection_name)
#move object
newobjectpos = (objectpos[0] , pagesize[1] - (objectpos[1] + objectsize[1]))
scribus.moveObjectAbs(objectpos[0], newobjectpos[1], selection_name)
#flip object
scribus.flipObject(0,1,selection_name)
def main(argv):
unit = scribus.getUnit()
units = [' pts','mm',' inches',' picas','cm',' ciceros']
unitlabel = units[unit]
if scribus.selectionCount() == 0:
scribus.messageBox('Scribus - Script Error',
"There is no object selected.\nPlease select a text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
if scribus.selectionCount() > 1:
scribus.messageBox('Scribus - Script Error',
"You have more than one object selected.\nPlease select one text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
textbox = scribus.getSelectedObject()
pageitems = scribus.getPageItems()
boxcount = 1
for item in pageitems:
if (item[0] == textbox):
if (item[1] != 4):
scribus.messageBox('Scribus - Script Error',
"This is not a textframe. Try again.", scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
# While we're finding out what kind of frame is selected, we'll also make sure we
# will come up with a unique name for our infobox frame - it's possible we may want
# more than one for a multicolumn frame.
if (item[0] == ("infobox" + str(boxcount) + textbox)):
boxcount += 1
left, top = scribus.getPosition(textbox)
o_width, o_height = scribus.getSize(textbox)
o_cols = int(scribus.getColumns(textbox))
o_gap = scribus.getColumnGap(textbox)
columns_width = 0
column_pos = 0
o_colwidth = (o_width - ((o_cols - 1) * o_gap)) / o_cols
if (o_cols > 1):
while (columns_width > o_cols or columns_width < 1):
columns_width = scribus.valueDialog('Width',
'How many columns width shall the '+
'box be (max ' + str(o_cols) + ')?','1')
columns_width = int(columns_width)
if (columns_width < o_cols):
max = o_cols - columns_width
while (column_pos <= max and column_pos <= 1):
column_pos = scribus.valueDialog('Placement',
'In which column do you want '
'to place the box (1 to ' +
str(o_cols) + ')?','1')
column_pos = int(column_pos) - 1
if (o_cols == 1):
columns_width = 1
new_height = 0
while (new_height == 0):
new_height = scribus.valueDialog('Height','Your frame height is '+ str(o_height) +
unitlabel +'. How tall\n do you want your ' +
'infobox to be in '+ unitlabel +'?\n If you load an image, height will be\n calculated, so the value here does not\n matter.', str(o_height))
new_top = -1
while (new_top < 0):
new_top = scribus.valueDialog('Y-Pos','The top of your infobox is currently\n'+ str(top) +
unitlabel +'. Where do you want \n' +
'the top to be in '+ unitlabel +'?', str(top))
framename = scribus.valueDialog('Name of Frame','Name your frame or use this default name',"infobox" + str(boxcount) + textbox)
frametype = 'text'
frametype = scribus.valueDialog('Frame Type','Change to anything other\n than "text" for image frame.\nEnter "imageL" to also load an image',frametype)
new_width = columns_width * o_colwidth + (columns_width-1) * o_gap
new_left = left + ((column_pos) * o_colwidth) + ((column_pos) * o_gap)
if (frametype == 'text'):
new_textbox = scribus.createText(new_left, float(new_top), new_width, float(new_height),framename)
scribus.setColumnGap(0, new_textbox)
scribus.setColumns(1, new_textbox)
scribus.textFlowMode(new_textbox, 1)
else:
if (frametype == 'imageL'):
imageload = scribus.fileDialog('Load image','Images(*.jpg *.png *.tif *.JPG *.PNG *.jpeg *.JPEG *.TIF)',haspreview=1)
new_image = scribus.createImage(new_left, float(new_top), new_width, float(new_height),framename)
scribus.loadImage(imageload, new_image)
scribus.messageBox('Please Note',"Your frame will be created once you click OK.\n\nUse the Context Menu to Adjust Frame to Image.\n\nIf your image does not fill the width completely,\nstretch the frame vertically first.",scribus.BUTTON_OK)
else:
new_image = scribus.createImage(new_left, float(new_top), new_width, float(new_height),framename)
scribus.textFlowMode(new_image, 1)
scribus.setScaleImageToFrame(scaletoframe=1, proportional=1, name=new_image)
def main(argv):
unit = scribus.getUnit()
units = ['pts', 'mm', 'inches', 'picas', 'cm', 'ciceros']
unitlabel = units[unit]
#layout_style = ""
#frame = 3
#border = 3
# layout style
layout_style = scribus.valueDialog("Layout Style", layout_text, mylayout)
if layout_style == "h":
scribus.messageBox("Help", help_text)
sys.exit()
if layout_style == "v":
createDefaultVal()
sys.exit()
if layout_style == "":
sys.exit()
# frame
frame_str = scribus.valueDialog(
"Set Page Frame", "Set page frame size (" + unitlabel +
") :\n(positive for page margin,\nnegative for page bleed)\n", myframe)
if frame_str != "":
frame = float(frame_str)
else:
sys.exit()
# border
if int(layout_style) > 1:
border_str = scribus.valueDialog(
"Add Image Border",
"Add border around images (" + unitlabel + ") :\n", myborder)
if border_str != "":
border = float(border_str)
else:
sys.exit()
else:
border = 0
bleed = -frame
# get page size
xysize = scribus.getPageSize()
size = (xysize[0] + 2 * bleed, xysize[1] + 2 * bleed)
#scribus.createImage(0, 0, size[0]/2, size[1]/2)
# layouts
# one image on two pages (put it on the left page)
if layout_style == "0":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
(size[0] * 2) - border - bleed * 2,
size[1] - border)
# one image on one full page
if layout_style == "1":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] - border * 2, size[1] - border * 2)
# two vertical images
if layout_style == "2":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] - border * 2)
scribus.createImage(size[0] / 2 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] - border * 2)
#guides
scribus.setVGuides(
[size[0] / 2 - border - bleed, size[0] / 2 + border - bleed])
#scribus.setHGuides([size[1]/2-border-bleed, size[1]/2+border-bleed])
# two horizontal images
if layout_style == "22":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] - border * 2, size[1] / 2 - border * 2)
scribus.createImage(0 + border - bleed, size[1] / 2 + border - bleed,
size[0] - border * 2, size[1] / 2 - border * 2)
#guides
#scribus.setVGuides([size[0]/2-border-bleed, size[0]/2+border-bleed])
scribus.setHGuides(
[size[1] / 2 - border - bleed, size[1] / 2 + border - bleed])
# one vertical image left, two horizontal images right
if layout_style == "3":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] - border * 2)
scribus.createImage(size[0] / 2 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(size[0] / 2 + border - bleed,
size[1] / 2 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
#guides
scribus.setVGuides(
[size[0] / 2 - border - bleed, size[0] / 2 + border - bleed])
scribus.setHGuides(
[size[1] / 2 - border - bleed, size[1] / 2 + border - bleed])
# one vertical image left, two horizontal images right
if layout_style == "33":
scribus.createImage(size[0] / 2 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] - border * 2)
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(0 + border - bleed, size[1] / 2 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
#guides
scribus.setVGuides(
[size[0] / 2 - border - bleed, size[0] / 2 + border - bleed])
scribus.setHGuides(
[size[1] / 2 - border - bleed, size[1] / 2 + border - bleed])
# one image on top, two images on bottom
if layout_style == "333":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] - border * 2, size[1] / 2 - border * 2)
scribus.createImage(0 + border - bleed, size[1] / 2 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(size[0] / 2 + border - bleed,
size[1] / 2 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
#guides
scribus.setVGuides(
[size[0] / 2 - border - bleed, size[0] / 2 + border - bleed])
scribus.setHGuides(
[size[1] / 2 - border - bleed, size[1] / 2 + border - bleed])
# one image on top, two images on bottom
if layout_style == "3333":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(size[0] / 2 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(0 + border - bleed, size[1] / 2 + border - bleed,
size[0] - border * 2, size[1] / 2 - border * 2)
#guides
scribus.setVGuides(
[size[0] / 2 - border - bleed, size[0] / 2 + border - bleed])
scribus.setHGuides(
[size[1] / 2 - border - bleed, size[1] / 2 + border - bleed])
# four horizontal images
if layout_style == "4":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(size[0] / 2 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(0 + border - bleed, size[1] / 2 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(size[0] / 2 + border - bleed,
size[1] / 2 + border - bleed,
size[0] / 2 - border * 2, size[1] / 2 - border * 2)
#guides
scribus.setVGuides(
[size[0] / 2 - border - bleed, size[0] / 2 + border - bleed])
scribus.setHGuides(
[size[1] / 2 - border - bleed, size[1] / 2 + border - bleed])
# six images 3 + 3
if layout_style == "6":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] / 3 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(size[0] / 3 + border - bleed, 0 + border - bleed,
size[0] / 3 - border * 2, size[1] / 2 - border * 2)
scribus.createImage((size[0] / 3) * 2 + border - bleed,
0 + border - bleed, size[0] / 3 - border * 2,
size[1] / 2 - border * 2)
scribus.createImage(0 + border - bleed, size[1] / 2 + border - bleed,
size[0] / 3 - border * 2, size[1] / 2 - border * 2)
scribus.createImage(size[0] / 3 + border - bleed,
size[1] / 2 + border - bleed,
size[0] / 3 - border * 2, size[1] / 2 - border * 2)
scribus.createImage((size[0] / 3) * 2 + border - bleed,
size[1] / 2 + border - bleed,
size[0] / 3 - border * 2, size[1] / 2 - border * 2)
#guides
scribus.setVGuides([
size[0] / 3 - border - bleed, size[0] / 3 - bleed + border,
(size[0] / 3) * 2 - border - bleed,
(size[0] / 3) * 2 + border - bleed
])
scribus.setHGuides(
[size[1] / 2 - border - bleed, size[1] / 2 + border - bleed])
# six images 2 +2 + 2
if layout_style == "66":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2, size[1] / 3 - border * 2)
scribus.createImage(size[0] / 2 + border - bleed, 0 + border - bleed,
size[0] / 2 - border * 2,
(size[1] / 3) - border * 2)
scribus.createImage(0 + border - bleed, size[1] / 3 + border - bleed,
size[0] / 2 - border * 2, size[1] / 3 - border * 2)
scribus.createImage(size[0] / 2 + border - bleed,
size[1] / 3 + border - bleed,
size[0] / 2 - border * 2,
(size[1] / 3) - border * 2)
scribus.createImage(0 + border - bleed,
(size[1] / 3) * 2 + border - bleed,
size[0] / 2 - border * 2, size[1] / 3 - border * 2)
scribus.createImage(size[0] / 2 + border - bleed,
(size[1] / 3) * 2 + border - bleed,
size[0] / 2 - border * 2,
(size[1] / 3) - border * 2)
#guides
scribus.setVGuides(
[size[0] / 2 - border - bleed, size[0] / 2 + border - bleed])
scribus.setHGuides([
size[1] / 3 - border - bleed, size[1] / 3 + border - bleed,
(size[1] / 3) * 2 - border - bleed,
(size[1] / 3) * 2 + border - bleed
])
# nine images
if layout_style == "9":
scribus.createImage(0 + border - bleed, 0 + border - bleed,
size[0] / 3 - border * 2, size[1] / 3 - border * 2)
scribus.createImage(size[0] / 3 + border - bleed, 0 + border - bleed,
size[0] / 3 - border * 2, size[1] / 3 - border * 2)
scribus.createImage((size[0] / 3) * 2 + border - bleed,
0 + border - bleed, size[0] / 3 - border * 2,
size[1] / 3 - border * 2)
scribus.createImage(0 + border - bleed, size[1] / 3 + border - bleed,
size[0] / 3 - border * 2, size[1] / 3 - border * 2)
scribus.createImage(size[0] / 3 + border - bleed,
size[1] / 3 + border - bleed,
size[0] / 3 - border * 2, size[1] / 3 - border * 2)
scribus.createImage((size[0] / 3) * 2 + border - bleed,
size[1] / 3 + border - bleed,
size[0] / 3 - border * 2, size[1] / 3 - border * 2)
scribus.createImage(0 + border - bleed,
(size[1] / 3) * 2 + border - bleed,
size[0] / 3 - border * 2, size[1] / 3 - border * 2)
scribus.createImage(size[0] / 3 + border - bleed,
(size[1] / 3) * 2 + border - bleed,
size[0] / 3 - border * 2, size[1] / 3 - border * 2)
scribus.createImage((size[0] / 3) * 2 + border - bleed,
(size[1] / 3) * 2 + border - bleed,
size[0] / 3 - border * 2, size[1] / 3 - border * 2)
#guides
scribus.setVGuides([
size[0] / 3 - border - bleed, size[0] / 3 - bleed + border,
(size[0] / 3) * 2 - border - bleed,
(size[0] / 3) * 2 + border - bleed
])
scribus.setHGuides([
size[1] / 3 - border - bleed, size[1] / 3 + border - bleed,
(size[1] / 3) * 2 - border - bleed,
(size[1] / 3) * 2 + border - bleed
])
def main(argv):
userdim = scribus.getUnit() # get unit and change it to mm
scribus.setUnit(scribus.UNIT_MILLIMETERS)
cellwidthleft = 0
cellwidthright = 0
# Set starting position
hposition = 28
vposition = 20
data = getCSVdata()
di = getDataInformation(data)
ncol = len(data[0])
nrow = len(data)
scribus.messageBox("Table", " " + str(ncol) + " columns, " +
str(nrow) + " rows ") #jpg
ColWidthList = []
TableWidth = 0
RowHeightList = []
TableHeight = 0
i = 0
for row in data:
if i == 0:
c = 0
for cell in row:
ColWidth = 40
ColWidthList.append(ColWidth)
TableWidth = TableWidth + ColWidth
c = c + 1
RowHeight = 15
RowHeightList.append(RowHeight)
TableHeight = TableHeight + RowHeight
i = i + 1
objectlist = [
] # here we keep a record of all the created textboxes so we can group them later
i = 0
scribus.progressTotal(len(data))
scribus.setRedraw(False)
rowindex = 0
new_row_indication = 1
new_page_indication = 1
firstorigin_indicator = 1
while rowindex < len(data):
c = 0
origin_cd = data[rowindex][0].strip()
origin = data[rowindex][1].strip()
origin_complete = origin + ' (' + origin_cd + ")"
headerorigin = origin_complete
origin_added = 0
destination_cd = data[rowindex][2].strip()
destination = data[rowindex][3].strip()
destination_complete = destination + ' (' + destination_cd + ")"
fareplan = data[rowindex][4].strip()
fareplan_type = data[rowindex][5].strip()
fareplan_complete = fareplan + ' ' + fareplan_type[:1]
fare = data[rowindex][6].strip()
fare = float(fare)
fare = "{0:.2f}".format(fare)
fare_onboard = data[rowindex][7].strip()
fare_onboard = float(fare_onboard)
fare_onboard = "{0:.2f}".format(fare_onboard)
cellheight_market = 5
cellheight_market_dos = 5
try:
last_origin = data[rowindex - 1][1].strip()
except:
last_origin = origin
try:
last_destination = data[rowindex - 1][3].strip()
except:
last_destination = destination
cellsize = ColWidthList[c]
cellHeight = RowHeightList[i]
# Check to see if near bottom of the page, if so wrap it over
if (vposition > 227):
hposition = hposition + cellsize
vposition = 20
new_row_indication = 1
# If at end, reset and create new page
if (hposition > 174):
scribus.newPage(-1)
hposition = 28
vposition = 20
new_page_indication = 1
firstorigin_indicator = 0
if new_row_indication == 1:
textbox = scribus.createText(hposition, 16, cellsize / 2,
4) # create a textbox.
objectlist.append(textbox)
scribus.setStyle('FareplanHeader', textbox)
scribus.insertText('Fareplan', 0, textbox)
c = c + 1
textbox = scribus.createText(hposition + (cellsize / 2), 16,
cellsize / 2, 4) # create a textbox.
objectlist.append(textbox)
scribus.setStyle('FareplanHeader', textbox)
scribus.insertText('Amount', 0, textbox)
c = c + 1
# if (firstorigin_indicator == 1):
# headerorigin = origin_complete
# textbox = scribus.createText(20, 10, cellsize*4, 4) # create a textbox.
# objectlist.append(textbox)
# scribus.setStyle('HeaderOrigin', textbox)
# scribus.insertText(headerorigin, 0, textbox)
# c = c + 1
# Origin textbox
if (rowindex < len(data)):
if ((origin != last_origin) or (rowindex == 0)):
# Add 'btwn' text
textbox = scribus.createText(hposition, vposition, cellsize,
4) # create a textbox.
objectlist.append(textbox)
scribus.setStyle(
'Headings', textbox
) # set it in the style 'Headings' as defined in Scribus.
scribus.insertText(
'btwn', 0, textbox) # insert the origin into the textbox.
# scribus.setDistances(1,1,1,1) # set the distances.
vposition = vposition + 4 # Shift position of cell down.
c = c + 1
textbox = scribus.createText(
hposition, vposition, cellsize,
cellheight_market_dos) # create a textbox.
objectlist.append(textbox)
scribus.setStyle(
'Headings', textbox
) # set it in the style 'Headings' as defined in Scribus.
scribus.insertText(
origin_complete, 0,
textbox) # insert the origin into the textbox.
while (scribus.textOverflows(textbox) > 0):
cellheight_market_dos += 1
scribus.sizeObject(cellsize, cellheight_market_dos,
textbox)
vposition = vposition + cellheight_market_dos # Shift position of cell down.
c = c + 1
# Add 'and' text
textbox = scribus.createText(hposition, vposition, cellsize,
4) # create a textbox.
objectlist.append(textbox)
scribus.setStyle(
'andStyle', textbox
) # set it in the style 'andStyle' as defined in Scribus.
scribus.insertText(
'and', 0, textbox) # insert the origin into the textbox.
vposition = vposition + 4 # Shift position of cell down.
c = c + 1
origin_added = 1
firstorigin_indicator = firstorigin_indicator + 1
# Insert the origin at the top margin
if (firstorigin_indicator == 1 or rowindex == 0):
headerorigin = origin_complete
textbox = scribus.createText(28, 10, cellsize * 4,
4) # create a textbox.
objectlist.append(textbox)
scribus.setStyle('HeaderOrigin', textbox)
scribus.insertText(headerorigin, 0, textbox)
c = c + 1
# Destination textbox
if ((destination != last_destination) or (rowindex == 0)
or (origin_added == 1)):
textbox = scribus.createText(
hposition, vposition, cellsize,
cellheight_market) # create a textbox.
objectlist.append(textbox)
scribus.setStyle(
'Headings', textbox
) # set it in the style 'Headings' as defined in Scribus.
scribus.insertText(
destination_complete, 0,
textbox) # insert the destination into the textbox.
while (scribus.textOverflows(textbox) > 0):
cellheight_market += 1
scribus.sizeObject(cellsize, cellheight_market, textbox)
vposition = vposition + cellheight_market # Shift position of cell down.
c = c + 1
rowindex = rowindex + 1
# Fareplan textbox
fareplan_box_height = 5
if fare_onboard != '0.00':
fareplan_box_height = 10
textbox = scribus.createText(hposition, vposition, cellsize / 2,
fareplan_box_height) # create a textbox.
objectlist.append(textbox)
scribus.insertText(fareplan_complete, 0,
textbox) # insert the fareplan into the textbox.
hposition = hposition + (cellsize / 2) # Shift position of cell right.
c = c + 1
# Fare textbox
textbox = scribus.createText(hposition, vposition, cellsize / 2,
5) # create a textbox.
objectlist.append(textbox)
scribus.insertText(fare, 0,
textbox) # insert the fare into the textbox.
c = c + 1
if fare_onboard != '0.00':
vposition = vposition + 5 # Shift position of cell down.
textbox = scribus.createText(hposition, vposition, cellsize / 2,
5) # create a textbox.
objectlist.append(textbox)
scribus.setStyle('OnBoard', textbox)
scribus.insertText(fare_onboard, 0,
textbox) # insert the fare into the textbox.
hposition = hposition - (cellsize / 2
) # Shift position of cell back.
vposition = vposition + 5 # Shift position of cell down.
c = c + 1
else:
hposition = hposition - (cellsize / 2
) # Shift position of cell back.
vposition = vposition + 5 # Shift position of cell down.
i = i + 1
new_row_indication = 0
new_page_indication = 0
scribus.deselectAll()
scribus.groupObjects(objectlist)
scribus.progressReset()
scribus.setUnit(userdim) # reset unit to previous value
scribus.docChanged(True)
scribus.statusMessage("Done")
scribus.setRedraw(True)
def main(argv):
if not scribus.haveDoc():
sys.exit(1)
os.chdir(os.path.expanduser("~"))
####
#### If you have a different location of your laidout program change it here:
####
laidoutexecutable="/usr/bin/laidout"
if os.path.exists(laidoutexecutable)==False:
laidoutexecutable="/usr/local/bin/laidout"
if os.path.exists(laidoutexecutable)==False:
print "Could not find Laidout!"
print "Please change scribus-call-laidout-to-impose-gui.py to have a correct path!"
#scribus.messageBox("Could not find Laidout!",
# "Please change line 37 in scribus-call-laidout-to-impose-gui.py to have a correct path!")
#laidoutexecutable=scribus.valueDialog("Laidout path","You do not appear to have Laidout installed! Please enter a valid path for running Laidout","/usr/bin/laidout")
laidoutexecutable=scribus.fileDialog('Please locate Laidout executable!!', defaultname='/usr/bin/laidout', issave=False)
print "New laidout executable path: "+laidoutexecutable
#fail if still not found
if os.path.exists(laidoutexecutable)==False:
scribus.messageBox("Could not find Laidout!",
"Please either change line for \'laidoutexecutable=\"/usr/bin/laidout\"\' in scribus-call-laidout-to-impose-gui.py"
" to have a correct path, or enter a valid path.")
sys.exit(1)
thecommand=""
infile=os.getcwd()+"/this-is-a-temporary-file.sla" #note this saves to a very random area usually!!
reimposed=os.getcwd()+"/this-is-reimposed-from-laidout.sla" # seems like directory of the plugin
#infile =tempfile.NamedTemporaryFile() <-- maybe this can be used instead?? how to create, get filename, then let laidout open??
#outfile=tempfile.NamedTemporaryFile() <-- maybe this can be used instead??
size=scribus.getPageSize()
units=scribus.getUnit()
width=0
height=0
print "size "+str(size[0])+","+str(size[1])
print "units "+str(units)
if (units==scribus.UNIT_MILLIMETERS):
width=size[0]/10/2.54
height=size[1]/10/2.54
elif (units==scribus.UNIT_PICAS):
width=size[0]/6
height=size[1]/6
elif (units==scribus.UNIT_POINTS):
width=size[0]/72
height=size[1]/72
elif (units==scribus.UNIT_INCHES):
width=size[0]
height=size[1]
else:
print "unknown units!!!"
scribus.messageBox("Unknown units!","For some reason, scribus.getUnit() did not return units known to this script!"
"This is probably a bug with the script.")
#thecommand="/bin/ls"
thecommand=laidoutexecutable+" --impose-only " \
+"'in=\""+infile+"\" " \
+" out=\""+reimposed+"\" " \
+" prefer=\"booklet\"" \
+" width=\""+str(width)+"\"" \
+" height=\""+str(height)+"\"" \
+"'"
#print "command:\n", thecommand
try:
print "Creating temporary file ",infile,"..."
scribus.saveDocAs(infile)
except:
print "Could not save as ",infile
sys.exit(1)
try:
print "Trying: "+thecommand
os.system(thecommand)
except:
print "An error occured trying to run the system command:\n",thecommand
sys.exit(1)
if os.path.exists(reimposed)==False:
print "Reimposed file was not generated!"
sys.exit(1)
#scribus.closeDoc() #closes the "original" document, which has been rename to infile upon saveDocAs()
scribus.openDoc(reimposed) #open the brand spanking new reimposed document
#if (os.path.isfile(reimposed)): os.remove(reimposed) <-- might cause problems, but keep around for research
print "Removing temporary file ",infile,"..."
os.remove(infile)
print "All done!"
def main(argv):
if not scribus.haveDoc():
sys.exit(1)
os.chdir(os.path.expanduser("~"))
####
#### If you have a different location of your laidout program change it here:
####
laidoutexecutable = "/usr/bin/laidout"
if os.path.exists(laidoutexecutable) == False:
laidoutexecutable = "/usr/local/bin/laidout"
if os.path.exists(laidoutexecutable) == False:
print "Could not find Laidout!"
print "Please change scribus-call-laidout-to-impose-gui.py to have a correct path!"
#scribus.messageBox("Could not find Laidout!",
# "Please change line 37 in scribus-call-laidout-to-impose-gui.py to have a correct path!")
#laidoutexecutable=scribus.valueDialog("Laidout path","You do not appear to have Laidout installed! Please enter a valid path for running Laidout","/usr/bin/laidout")
laidoutexecutable = scribus.fileDialog(
'Please locate Laidout executable!!',
defaultname='/usr/bin/laidout',
issave=False)
print "New laidout executable path: " + laidoutexecutable
#fail if still not found
if os.path.exists(laidoutexecutable) == False:
scribus.messageBox(
"Could not find Laidout!",
"Please either change line for \'laidoutexecutable=\"/usr/bin/laidout\"\' in scribus-call-laidout-to-impose-gui.py"
" to have a correct path, or enter a valid path.")
sys.exit(1)
thecommand = ""
infile = os.getcwd(
) + "/this-is-a-temporary-file.sla" #note this saves to a very random area usually!!
reimposed = os.getcwd(
) + "/this-is-reimposed-from-laidout.sla" # seems like directory of the plugin
#infile =tempfile.NamedTemporaryFile() <-- maybe this can be used instead?? how to create, get filename, then let laidout open??
#outfile=tempfile.NamedTemporaryFile() <-- maybe this can be used instead??
size = scribus.getPageSize()
units = scribus.getUnit()
width = 0
height = 0
print "size " + str(size[0]) + "," + str(size[1])
print "units " + str(units)
if (units == scribus.UNIT_MILLIMETERS):
width = size[0] / 10 / 2.54
height = size[1] / 10 / 2.54
elif (units == scribus.UNIT_PICAS):
width = size[0] / 6
height = size[1] / 6
elif (units == scribus.UNIT_POINTS):
width = size[0] / 72
height = size[1] / 72
elif (units == scribus.UNIT_INCHES):
width = size[0]
height = size[1]
else:
print "unknown units!!!"
scribus.messageBox(
"Unknown units!",
"For some reason, scribus.getUnit() did not return units known to this script!"
"This is probably a bug with the script.")
#thecommand="/bin/ls"
thecommand=laidoutexecutable+" --impose-only " \
+"'in=\""+infile+"\" " \
+" out=\""+reimposed+"\" " \
+" prefer=\"booklet\"" \
+" width=\""+str(width)+"\"" \
+" height=\""+str(height)+"\"" \
+"'"
#print "command:\n", thecommand
try:
print "Creating temporary file ", infile, "..."
scribus.saveDocAs(infile)
except:
print "Could not save as ", infile
sys.exit(1)
try:
print "Trying: " + thecommand
os.system(thecommand)
except:
print "An error occured trying to run the system command:\n", thecommand
sys.exit(1)
if os.path.exists(reimposed) == False:
print "Reimposed file was not generated!"
sys.exit(1)
#scribus.closeDoc() #closes the "original" document, which has been rename to infile upon saveDocAs()
scribus.openDoc(reimposed) #open the brand spanking new reimposed document
#if (os.path.isfile(reimposed)): os.remove(reimposed) <-- might cause problems, but keep around for research
print "Removing temporary file ", infile, "..."
os.remove(infile)
print "All done!"
(margin_top, margin_left, margin_right, margin_bottom) = scribus.getPageNMargins(scribus.currentPage())
print "left " + str(margin_left)
print "right " + str(margin_right)
(width, height) = scribus.getPageNSize(scribus.currentPage())
print "width " + str(width)
print "height " + str(height)
cell_width = (width - (margin_left + margin_right) - (gap * (n - 1))) / n
print cell_width
guide = []
previous_guide = margin_left
for i in range(0, n - 1):
guide.append(previous_guide + cell_width)
guide.append(previous_guide + cell_width + gap)
previous_guide = previous_guide + cell_width + gap
scribus.setHGuides(guide)
unit_current=scribus.getUnit() #get unit and change it to mm
scribus.setUnit(scribus.UNIT_MILLIMETERS)
page = scribus.getPageSize()
margin = scribus.getPageMargins()
# scribus.setHGuides([10,20,30])
setGuidesColumn(6, 5)
setGuidesRow(4, 5)
scribus.setUnit(unit_current)
def main(argv):
unit = scribus.getUnit()
units = ['pts', 'mm', 'inches', 'picas', 'cm', 'ciceros']
unitlabel = units[unit]
# get page size
xysize = scribus.getPageSize()
# ask for layout style
layout_style = scribus.valueDialog("Guides Layout", layout_text, "1")
if layout_style == "":
sys.exit()
# 0 = erase all guides
if layout_style == "0":
#guides
scribus.setVGuides([])
scribus.setHGuides([])
sys.exit()
# 1 = guides around page
if layout_style == "1":
# set guides distance
pageguides_str = scribus.valueDialog(
"Create Guides around Page",
"Set distance to page borders (" + unitlabel +
") :\n\n- positive (e.g. 3) for page margin\n\n- negative (e.g. -3) for page bleed\n",
"3")
if pageguides_str != "":
pageguides = float(pageguides_str)
else:
sys.exit()
#set guides
scribus.setVGuides(scribus.getVGuides() +
[pageguides, xysize[0] - pageguides])
scribus.setHGuides(scribus.getHGuides() +
[pageguides, xysize[1] - pageguides])
# 2 = guides around selected object
if layout_style == "2":
# set guides distance
objectguides_str = scribus.valueDialog(
"Create Guides around selected Objects",
"Set distance to object borders (" + unitlabel +
") :\n\n- 0 for around the object borders\n\n- positive (e.g. 3) towards inside the object\n\n- negative (e.g. -3) towards outside the object\n",
"0")
if objectguides_str != "":
objectguides = float(objectguides_str)
else:
sys.exit()
if scribus.selectionCount() == 0:
scribus.messageBox("Error",
"Select an object first !",
icon=scribus.ICON_WARNING)
sys.exit()
#get selected object
selection_name = scribus.getSelectedObject(0)
objectpos = scribus.getPosition(selection_name)
objectsize = scribus.getSize(selection_name)
#set guides
scribus.setVGuides(scribus.getVGuides() + [
objectpos[0] + objectguides, objectpos[0] + objectsize[0] -
objectguides
])
scribus.setHGuides(scribus.getHGuides() + [
objectpos[1] + objectguides, objectpos[1] + objectsize[1] -
objectguides
])