def measure_z2() :
if scriptSys.GENERAL['mode'] != 'Z_MEASURE2' : #si es llamado por primera vez
scriptSys.GENERAL['mode'] = 'Z_MEASURE2'
scriptSys.TIME_INIT = scriptSys.TIME
print "DISCHARGE,1.0"
return
actual_time = (scriptSys.TIME - scriptSys.TIME_INIT)
if actual_time >= tTestD2 :
# deja reposar y chequea q no caiga la tension
# final_report()
stress_test()
return
if actual_time >= (tTestC2 - tMargin) and actual_time < (tTestC2 + tMargin) :
# print "DISCHARGE,1.0" Descarga fuerte
scriptSys.import_data()
t = scriptSys.TIME_INIT + tTestB2 + 2 #delay en el inicio de la descarga
var = scriptSys.get_data('VOLTAGE', range( t - 5 , t - 5 + voltageAverage))
V1 = sum(var) / float(len(var)) #promedio de las mediciones al principio
var = scriptSys.get_data('VOLTAGE', range( scriptSys.TIME - voltageAverage, scriptSys.TIME ))
V2 = sum(var) / float(len(var)) #promedio de las mediciones al final del test
var = scriptSys.get_data('CURRENT', range(scriptSys.TIME - currentAverage,scriptSys.TIME))
I1 = sum(var) / float(len(var)) #promedio de las mediciones al principio
Z2 = int( ( (float(V2)-float(V1))/float(I1) ) *1000 )
scriptSys.EVAL['int_z2'] = str(Z2)
scriptSys.EVAL['int_z'] = str(Z2) #str(round(Z1,0))
# chequear rectas
print "PAUSE"
return
if actual_time >= (tTestB2 - tMargin) and actual_time < (tTestB2 + tMargin) :
# deja reposar y chequea q no caiga la tension
# stress_test()
print "DISCHARGE,1.5"
return
if actual_time >= (tTestA2 - tMargin) and actual_time < (tTestA2 + tMargin) :
# print "DISCHARGE,0.2" Descarga suave
scriptSys.import_data()
t = scriptSys.TIME_INIT + 2 #delay en el inicio de la descarga
var = scriptSys.get_data('VOLTAGE', range( t - 5, t- 5 + voltageAverage))
V1 = sum(var) / float(len(var)) #promedio de las mediciones al principio
var = scriptSys.get_data('VOLTAGE', range( scriptSys.TIME - voltageAverage, scriptSys.TIME ))
V2 = sum(var) / float(len(var)) #promedio de las mediciones al final del test
var = scriptSys.get_data('CURRENT', range( scriptSys.TIME - currentAverage,scriptSys.TIME))
I1 = sum(var) / float(len(var)) #promedio de las mediciones al principio
Z1 = int( ( (float(V2)-float(V1))/float(I1) ) *1000 )
scriptSys.EVAL['int_z1'] = str(Z1) #str(round(Z1,3))
# chequear rectas
print "PAUSE"
return
print "RUN"
return
def evaluate():
try:
scriptSys.import_data()
scriptSys.data = scriptSys.data[10:-10]
i = []
for line in scriptSys.data:
i.append(int(line['I0']))
w = 20
for x in range(w + 1, len(i)):
iavew = sum(i[x - w:x - 1]) / float(len(i[x - w:x - 1]))
if (iavew - i[x]) > 100:
scriptSys.AUX['failcode'] = 1
return 'FAIL'
iave = sum(i) / float(len(i))
if iave < 600 and iave > 400:
scriptSys.AUX['failcode'] = 2
return 'FAIL'
if iave < 200:
scriptSys.AUX['failcode'] = 3
return 'FAIL'
return 'OK'
except Exception as e:
scriptSys.error_report(e, "evaluate()")
def measure_z1():
if scriptSys.GENERAL['mode'] != 'Z_MEASURE': #si es llamado por primera vez
scriptSys.GENERAL['mode'] = 'Z_MEASURE'
scriptSys.TIME_INIT = scriptSys.TIME
print "DISCHARGE,0.2"
if (scriptSys.TIME - scriptSys.TIME_INIT) >= (tTest3 + tTest2 + tTest1):
# deja reposar y chequea q no caiga la tension
scriptSys.import_data(
) #levanto todo el archivo solo cuando lo necesito
t = scriptSys.TIME_INIT + tTest1 + tTest2
var = scriptSys.get_data('VOLTAGE', range(t, t + voltageAverage))
# chequear rectas
stress_test()
elif (scriptSys.TIME - scriptSys.TIME_INIT) >= (tTest2 + tTest1):
# print "DISCHARGE,1.0" Descarga fuerte
scriptSys.import_data()
t = scriptSys.TIME_INIT + tTest1
var = scriptSys.get_data('VOLTAGE', range(t, t + voltageAverage))
V1 = sum(var) / float(
len(var)) #promedio de las mediciones al principio
var = scriptSys.get_data(
'VOLTAGE', range(t + tTest2, t + tTest2 + voltageAverage))
V2 = sum(var) / float(
len(var)) #promedio de las mediciones al final del test
var = scriptSys.get_data('CURRENT', range(t, t + currentAverage))
I1 = sum(var) / float(
len(var)) #promedio de las mediciones al principio
Z2 = int((float(V2 - V1) / float(I1)) * 1000)
scriptSys.EVAL['int_z2'] = Z2
# chequear rectas
elif (scriptSys.TIME - scriptSys.TIME_INIT) >= tTest1:
# print "DISCHARGE,0.2" Descarga suave
scriptSys.import_data()
t = scriptSys.TIME_INIT
var = scriptSys.get_data('VOLTAGE', range(t, t + voltageAverage))
V1 = sum(var) / float(
len(var)) #promedio de las mediciones al principio
var = scriptSys.get_data(
'VOLTAGE', range(t + tTest1, t + tTest1 + voltageAverage))
V2 = sum(var) / float(
len(var)) #promedio de las mediciones al final del test
var = scriptSys.get_data('CURRENT', range(t, t + currentAverage))
I1 = sum(var) / float(
len(var)) #promedio de las mediciones al principio
Z1 = int((float(V2 - V1) / float(I1)) * 1000)
scriptSys.EVAL['int_z1'] = Z1
# chequear rectas
print "DISCHARGE,1.0"
return
def evaluate():
try:
scriptSys.import_data()
flag1 = True
flag2 = False
flag3 = False
flag4 = False
var = []
cur = []
for line in scriptSys.data:
i = int(line['CURRENT'])
t = int(line['TIME'])
s = int(line['STATUS'])
if s == 3 and flag1 and (t > scriptSys.TIME_INIT):
flag1 = False
ind = scriptSys.data.index(line) - 1
Vi0 = int(scriptSys.data[ind - 1]['VOLTAGE'])
Vi0 += int(scriptSys.data[ind - 2]['VOLTAGE'])
Vi0 += int(scriptSys.data[ind - 3]['VOLTAGE'])
Vi0 += int(scriptSys.data[ind - 4]['VOLTAGE'])
Vi0 += int(scriptSys.data[ind - 5]['VOLTAGE'])
Vi0 /= 5 #promedio de las ultimas 5 muestas antes de la descarga
t0 = int(line['TIME']) #tiempo de inicio de la descarga
flag2 = True
if s == 4 and flag2 and (t > scriptSys.TIME_INIT):
flag2 = False
ind = scriptSys.data.index(line) + 1
Vf0 = int(scriptSys.data[ind + 1]['VOLTAGE'])
Vf0 += int(scriptSys.data[ind + 2]['VOLTAGE'])
Vf0 += int(scriptSys.data[ind + 3]['VOLTAGE'])
Vf0 += int(scriptSys.data[ind + 4]['VOLTAGE'])
Vf0 += int(scriptSys.data[ind + 5]['VOLTAGE'])
Vf0 /= 5 #promedio de las ultimas 5 muestas antes de la descarga
Vd1 = Vi0 - int(scriptSys.data[ind + 0]['VOLTAGE'])
Vd2 = Vi0 - int(scriptSys.data[ind + 16]['VOLTAGE'])
flag3 = True
if s == 3 and (t > scriptSys.TIME_INIT
): #tomo las tensiones durante la descarga
var.append(int(line['VOLTAGE']))
cur.append(int(line['CURRENT']))
#regresion lineal
testnr = int(scriptSys.AUX['testnr'])
if testnr == 1:
origin = org
if testnr == 2:
origin = org - 9000
if testnr == 3:
origin = org - 10000
if testnr == 4:
origin = org - 10000
if testnr == 5:
origin = org - 11000
result = factor1 * Vd1 + factor2 * Vd2
SoH = int((result * slopeP + origin) / 1000)
current = sum(cur) / len(cur)
Zint = int((float(float(Vf0 - Vi0)) / float(current)) * 1000)
scriptSys.AUX['current' + str(testnr)] = current
scriptSys.AUX['Vf0' + str(testnr)] = Vf0
scriptSys.AUX['Vi0' + str(testnr)] = Vi0
scriptSys.AUX['Zint' + str(testnr)] = Zint
# scriptSys.send_msg('SoH'+str(testnr)+":"+str(SoH))
######################################################
#evaluacion de repetir el test
# t0 -= len(var)
######################################################
Va = 20 #pico negativo maximo en la descarga
Vam = 250
#caso A
ave = sum(var[5:20]) / len(var[5:20])
t = 0
for v in var[0:5]:
t += 1
if (ave - v) > Va:
scriptSys.AUX['casoA_t' + str(t0 + t - 1)] = (ave - v)
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
# scriptSys.send_msg('casoA tiempo: '+ str(t0 + t -1))
if (ave - v) > Vam:
scriptSys.AUX['casoAm_t' + str(t0 + t - 1)] = (ave - v)
scriptSys.AUX['strike'] = str(int(scriptSys.AUX['strike']) + 1)
# scriptSys.send_msg('casoA tiempo: '+ str(t0 + t -1))
scriptSys.final_report("SoHfail", SoH)
return
######################################################
Vb = 50 #caida promedio maxima en la descarga
Vbm = 300
#caso B
w = 10
t = 5
for x in range(5 + w, len(var) - 5 - w):
t += 1
ave = sum(var[x - w:x]) / len(var[x - w:x])
if (ave - var[x]) > Vb:
scriptSys.AUX['casoB_t' + str(t0 + t + w)] = (ave - var[x])
# scriptSys.send_msg('casoB tiempo: '+ str(t0 + t +w))
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
if (ave - var[x]) > Vbm:
scriptSys.AUX['casoBm_t' + str(t0 + t + w)] = (ave - var[x])
scriptSys.AUX['strike'] = str(int(scriptSys.AUX['strike']) + 1)
# scriptSys.send_msg('casoB tiempo: '+ str(t0 + t +w))
scriptSys.final_report("SoHfail", SoH)
return
######################################################
Vc = 20
Vcm = 200
#caso C
ave = sum(var[-25:-5]) / len(var[-25:-5])
t = len(var[:-25])
for v in var[-5:]:
t += 1
if (ave - v) > Vc:
scriptSys.AUX['casoC_t' + str(t0 + t - 1)] = (ave - v)
# scriptSys.send_msg('casoC tiempo: '+ str(t0 + t -1))
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
if (ave - v) > Vcm:
scriptSys.AUX['casoCm_t' + str(t0 + t + w)] = (ave - v)
# scriptSys.send_msg('casoC tiempo: '+ str(t0 + t -1))
scriptSys.AUX['strike'] = str(int(scriptSys.AUX['strike']) + 1)
scriptSys.final_report("SoHfail", SoH)
return
######################################################
Vdm = 2800 #tension de caida maxima
#caso D
t = 0
for v in var:
t += 1
if v < Vdm:
scriptSys.AUX['casoDm_t' + str(t0 + t - 1)] = v
# scriptSys.send_msg('casoD tiempo: '+ str(t0 + t -1))
scriptSys.final_report("SoHfail", SoH)
return
######################################################
#caso E
p = 0 #evaluacion de pendiente positiva
t = 0
for x in range(20, len(var) - 10):
p += var[x + 1] - var[x]
t += 1
if p > 16:
# scriptSys.send_msg('casoE pendiente: '+ str(p))
scriptSys.AUX['casoE_t' + str(t0 + t - 1)] = p
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
######################################################
#casoF
w = 30 #evaluacion de caida de promedio
t = 15
for x in range(5 + w, len(var) - 5 - w):
t += 1
p = 0
for y in range(w):
p += var[x + y] - var[x + y + 1]
# print var[x]
if p > 132:
# scriptSys.send_msg('casoF pendiente: '+ str(p)+ ' tiempo: '+ str(t0 + t +w))
scriptSys.AUX['casoF_t' + str(t0 + t - 1)] = p
if int(scriptSys.AUX['strike']) >= 1:
if (t0 + t - 1) - int(scriptSys.AUX['striket']) >= 30:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
else:
scriptSys.AUX['strike'] = str(
int(scriptSys.AUX['strike']) + 1)
scriptSys.AUX['striket'] = str(t0 + t - 1)
######################################################
#evaluacion de strikes
strike = int(scriptSys.AUX['strike'])
scriptSys.AUX['strikeh'] = int(scriptSys.AUX['strikeh']) + strike
# if strike >= 3 or strikeh >= 3:
strikeh = int(scriptSys.AUX['strikeh'])
# scriptSys.final_report("SoHfail",SoH)
if strikeh >= 3:
scriptSys.final_report("SoHfail", SoH)
return
#evaluacion de repetir el test
# if testnr >= 2:
# soh1 = int(scriptSys.AUX['soh'+str(testnr-1)])
# # if abs(soh1-int(SoH)) < 20 and strike == 0:
# if abs(int(soh1)-int(SoH)) < 10:
# if (soh1+int(SoH))/2 > (Boundary + Bmargin):
# scriptSys.final_report("SoHok",SoH)
# return
# if (soh1+int(SoH))/2 < (Boundary - Bmargin):
# scriptSys.final_report("SoHfail",SoH)
# return
# if testnr >= 5:
# if (soh1+int(SoH))/2 >= (Boundary):
# scriptSys.final_report("SoHok",SoH)
# return
# if (soh1+int(SoH))/2 < (Boundary):
# scriptSys.final_report("SoHfail",SoH)
# return
if Zint > Z_BOUNDARY:
scriptSys.final_report("SoHok", Zint)
else:
scriptSys.final_report("SoHok", Zint)
scriptSys.AUX['strike'] = 0
scriptSys.TIME_INIT = scriptSys.TIME
scriptSys.AUX['testnr'] = str(int(scriptSys.AUX['testnr']) + 1)
print "RUN"
return
except Exception as e:
scriptSys.error_report(e, "evaluate()")
def measure_z2():
try:
if scriptSys.SCRIPT['mode'] != 'Z_MEASURE2': #si es llamado por 1
scriptSys.SCRIPT['mode'] = 'Z_MEASURE2'
scriptSys.TIME_INIT = scriptSys.TIME
print "DISCHARGE,1.0"
return
actual_time = (scriptSys.TIME - scriptSys.TIME_INIT)
if actual_time >= tTestD2:
# deja reposar y chequea q no caiga la tension
# final_report(0,0)
# stress_test()
scriptSys.SCRIPT['mode'] = 'CHARGE'
scriptSys.TIME_INIT = scriptSys.TIME
print "CHARGE,4.2,1.2"
# scriptTest.charge_state(1)
return
if actual_time >=(tTestC2 - tMargin) \
and actual_time <(tTestC2 + tMargin):
# print "DISCHARGE,1.0" Descarga fuerte
scriptSys.import_data()
#delay en el inicio de la descarga
t = scriptSys.TIME_INIT + tTestB2 + 2
var = scriptSys.get_data('VOLTAGE', \
range( t - 5 , t - 5 + voltageAverage))
#promedio de las mediciones al principio
V1 = sum(var) / float(len(var))
var = scriptSys.get_data('VOLTAGE', \
range( scriptSys.TIME - voltageAverage, scriptSys.TIME ))
#promedio de las mediciones al final del test
V2 = sum(var) / float(len(var))
var = scriptSys.get_data(
'CURRENT',
range(scriptSys.TIME - currentAverage, scriptSys.TIME))
#promedio de las mediciones al principio
I1 = sum(var) / float(len(var))
Z2 = int(((float(V2) - float(V1)) / float(I1)) * 1000)
scriptSys.EVAL['int_z2'] = str(Z2)
scriptSys.EVAL['int_z'] = str(Z2) #str(round(Z1,0))
# chequear rectas
print "PAUSE"
return
if actual_time >=(tTestB2 - tMargin) \
and actual_time <(tTestB2 + tMargin):
# deja reposar y chequea q no caiga la tension
# stress_test()
print "DISCHARGE,1.5"
return
if actual_time >= (tTestA2 - tMargin) \
and actual_time < (tTestA2 + tMargin) :
# print "DISCHARGE,0.2" Descarga suave
scriptSys.import_data()
t = scriptSys.TIME_INIT + 2 #delay en el inicio de la descarga
var = scriptSys.get_data('VOLTAGE', \
range( t - 5, t- 5 + voltageAverage))
#promedio de las mediciones al principio
V1 = sum(var) / float(len(var))
var = scriptSys.get_data('VOLTAGE', \
range( scriptSys.TIME - voltageAverage, scriptSys.TIME ))
#promedio de las mediciones al final del test
V2 = sum(var) / float(len(var))
var = scriptSys.get_data('CURRENT', \
range( scriptSys.TIME - currentAverage,scriptSys.TIME))
#promedio de las mediciones al principio
I1 = sum(var) / float(len(var))
Z1 = int(((float(V2) - float(V1)) / float(I1)) * 1000)
scriptSys.EVAL['int_z1'] = str(Z1) #str(round(Z1,3))
# chequear rectas
print "PAUSE"
return
print "RUN"
return
except Exception as e:
scriptSys.error_report(e, "measure_z2()")
import scriptDebug
except:
print "ERROR file scriptDebug Not found!!"
sys.exit()
#Setup
umbralVoltHigh = 3800
umbralVoltMin = 3600
umbralVoltLow = 3200
maxTimeInit = 20 # 20 seg
maxTimeDischarge = 30 * 60 # 30 min
maxTimeCharge = 1 * 60 * 60 # 1 hr
maxTimeCondit = 20 # 20 seg
if scriptSys.DEBUG_MODE: scriptInc.get_line('VOLTAGE', range(40, 60))
scriptSys.import_data()
################################################################
########## INIT ##########
################################################################
def init_state():
if int(scriptSys.TIME) > maxTimeInit:
if scriptSys.VOLTAGE < umbralVoltLow:
scriptSys.TIME_INIT = scriptSys.TIME
scriptSys.GENERAL['mode'] = "CHARGE"
print "CHARGE,4.5,1.0"
scriptSys.ini_Update()
sys.exit()
if scriptSys.VOLTAGE > umbralVoltHigh:
scriptSys.TIME_INIT = scriptSys.TIME