def build(self):
text = _(
'sK1 generates PDF file as a printing output. So as a printing target you can use any application \
which accepts PDF file on input: evince, kprinter, acroread etc. \
Printing command should contain %f symbols replaced by \
temporal PDF file name during printing.')
label = Text(self, height=5, wrap=WORD)
label.pack(side=TOP, anchor='nw')
label.insert(END, text)
frame = FlatFrame(self)
frame.pack(side=TOP, fill=X, expand=1, pady=10)
frame.columnconfigure(1, weight=1)
label = Label(frame, text=_('Printing command:'), justify=LEFT)
label.grid(column=0, row=0, sticky='w')
combo = TCombobox(frame,
state='normal',
values=self.prn_commandrs,
style='ComboNormal',
textvariable=self.var_print_command) #, width=30)
combo.grid(column=1, row=0, sticky='we', pady=5, padx=10)
label = Label(frame, text=_('Output PDF level:'), justify=LEFT)
label.grid(column=0, row=1, sticky='w')
combo = TCombobox(frame,
state='readonly',
values=self.levels,
style='ComboNormal',
width=10,
textvariable=self.var_pdf_level)
combo.grid(column=1, row=1, sticky='w', pady=5, padx=10)
def build(self):
text = _('sK1 generates PDF file as a printing output. So as a printing target you can use any application \
which accepts PDF file on input: evince, kprinter, acroread etc. \
Printing command should contain %f symbols replaced by \
temporal PDF file name during printing.')
label = Text(self, height=5, wrap=WORD)
label.pack(side=TOP, anchor='nw')
label.insert(END, text)
frame = FlatFrame(self)
frame.pack(side=TOP, fill=X, expand=1, pady=10)
frame.columnconfigure(1, weight=1)
label = Label(frame, text=_('Printing command:'), justify=LEFT)
label.grid(column=0, row=0, sticky='w')
combo = TCombobox(frame, state='normal', values=self.prn_commandrs, style='ComboNormal',
textvariable=self.var_print_command)#, width=30)
combo.grid(column=1, row=0, sticky='we', pady=5, padx=10)
label = Label(frame, text=_('Output PDF level:'), justify=LEFT)
label.grid(column=0, row=1, sticky='w')
combo = TCombobox(frame, state='readonly', values=self.levels, style='ComboNormal',
width=10, textvariable=self.var_pdf_level)
combo.grid(column=1, row=1, sticky='w', pady=5, padx=10)
def build_dlg(self):
if not self.builded:
cmds = self.mw.canvas.commands.Ellipse
label = TLabel(self.panel, text=_("Start:"))
label.pack(side=LEFT, padx=2)
self.entry_start = TSpinbox(self.panel, var=0, vartype=1, textvariable=self.start,
min=-360, max=360, step=5, width=6, command=self.applyAngle)
self.entry_start.pack(side=LEFT, padx=2)
tooltips.AddDescription(self.entry_start, _('Arc start point angle'))
#--------------
sep = FlatFrame(self.panel, width=5, height=2)
sep.pack(side=LEFT)
#--------------
label = TLabel(self.panel, text=_("End:"))
label.pack(side=LEFT, padx=2)
self.entry_end = TSpinbox(self.panel, var=0, vartype=1, textvariable=self.end,
min=-360, max=360, step=5, width=6, command=self.applyAngle)
self.entry_end.pack(side=LEFT, padx=2)
tooltips.AddDescription(self.entry_end, _('Arc end point angle'))
b = TButton(self.panel, command=self.ResetAngle, style='Toolbutton', image='context_arc_reset')
tooltips.AddDescription(b, _('Reset angles'))
b.pack(side=LEFT)
b = TButton(self.panel, command=self.SwapAngle, style='Toolbutton', image='context_arc_swap')
tooltips.AddDescription(b, _('Swap angles'))
b.pack(side=LEFT)
b = TLabel(self.panel, image="toolbar_sep")
b.pack(side=LEFT)
b = TButton(self.panel, command=cmds.EllipseArc.Invoke, style='Toolbutton', image='context_arc')
tooltips.AddDescription(b, _('to Arc'))
b.pack(side=LEFT)
b = TButton(self.panel, command=cmds.EllipseChord.Invoke, style='Toolbutton', image='context_chord')
tooltips.AddDescription(b, _('to Chord'))
b.pack(side=LEFT)
b = TButton(self.panel, command=cmds.EllipsePieSlice.Invoke, style='Toolbutton', image='context_pie')
tooltips.AddDescription(b, _('to Pie'))
b.pack(side=LEFT)
self.builded = 1
else:
obj = self.mw.document.CurrentObject()
if obj and obj.is_Ellipse:
start_angle = round(obj.start_angle / degrees, 2)
end_angle = round(obj.end_angle / degrees, 2)
self.entry_start.set_value(start_angle)
self.entry_end.set_value(end_angle)
def __init__(self, parent):
CtxSubPanel.__init__(self, parent)
self.radius1 = DoubleVar(self.mw.root, 0)
self.radius2 = DoubleVar(self.mw.root, 0)
label = TLabel(self.panel, image='context_rect_rx')
label.pack(side=LEFT, padx=2)
self.entry_radius1 = TSpinbox(self.panel,
var=0,
vartype=1,
textvariable=self.radius1,
min=0,
max=100,
step=1,
width=6,
command=self.applyRadius1)
self.entry_radius1.pack(side=LEFT, padx=2)
tooltips.AddDescription(self.entry_radius1,
_('Horizontal radius of rounded corners'))
#--------------
sep = FlatFrame(self.panel, width=4, height=2)
sep.pack(side=LEFT)
#--------------
label = TLabel(self.panel, image='context_rect_ry')
label.pack(side=LEFT, padx=2)
self.entry_radius2 = TSpinbox(self.panel,
var=0,
vartype=1,
textvariable=self.radius2,
min=0,
max=100,
step=1,
width=6,
command=self.applyRadius1)
self.entry_radius2.pack(side=LEFT, padx=2)
tooltips.AddDescription(self.entry_radius2,
_('Vertical radius of rounded corners'))
self.ReSubscribe()
def __init__(self, parent):
CtxSubPanel.__init__(self, parent)
self.radius1 = DoubleVar(self.mw.root, 0)
self.radius2 = DoubleVar(self.mw.root, 0)
label = TLabel(self.panel, image='context_rect_rx')
label.pack(side=LEFT, padx=2)
self.entry_radius1 = TSpinbox(self.panel, var=0, vartype=1, textvariable=self.radius1,
min=0, max=100, step=1, width=6, command=self.applyRadius1)
self.entry_radius1.pack(side=LEFT, padx=2)
tooltips.AddDescription(self.entry_radius1, _('Horizontal radius of rounded corners'))
#--------------
sep = FlatFrame(self.panel, width=4, height=2)
sep.pack(side=LEFT)
#--------------
label = TLabel(self.panel, image='context_rect_ry')
label.pack(side=LEFT, padx=2)
self.entry_radius2 = TSpinbox(self.panel, var=0, vartype=1, textvariable=self.radius2,
min=0, max=100, step=1, width=6, command=self.applyRadius1)
self.entry_radius2.pack(side=LEFT, padx=2)
tooltips.AddDescription(self.entry_radius2, _('Vertical radius of rounded corners'))
self.ReSubscribe()
def __init__(self, parent):
CtxSubPanel.__init__(self, parent)
self.USER_SPECIFIC = _("<Custom Size>")
root = self.mw.root
self.var_format_name = StringVar(root)
self.var_format_name.set(config.preferences.default_paper_format)
self.page_orientation = config.preferences.default_page_orientation
label = TLabel(self.panel, text=_("Page:"))
label.pack(side=LEFT, padx=2)
self.page_formats = TCombobox(self.panel, state='readonly', postcommand=self.set_format,
values=self.make_formats(), width=17, style='ComboNormal',
textvariable=self.var_format_name)
tooltips.AddDescription(self.page_formats, _("Page formats"))
self.page_formats.pack(side=LEFT, padx=2)
#--------------
sep = FlatFrame(self.panel, width=5, height=2)
sep.pack(side=LEFT)
#--------------
var_width_number = DoubleVar(root)
var_height_number = DoubleVar(root)
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, var_width_number, var_width_unit)
self.var_height = LengthVar(10, unit, var_height_number, var_height_unit)
jump = config.preferences.default_unit_jump
label = TLabel(self.panel, text=_("H:"))
label.pack(side=LEFT)
self.widthentry = TSpinbox(self.panel, textvariable=var_width_number, command=self.applyResize,
vartype=1, min=5, max=50000, step=jump, width=7)
tooltips.AddDescription(self.widthentry, _("Page width"))
self.widthentry.pack(side=LEFT, padx=2)
#--------------
sep = FlatFrame(self.panel, width=5, height=2)
sep.pack(side=LEFT)
#--------------
label = TLabel(self.panel, text=_("V:"))
label.pack(side=LEFT)
self.heightentry = TSpinbox(self.panel, textvariable=var_height_number, command=self.applyResize,
vartype=1, min=5, max=50000, step=jump, width=7)
tooltips.AddDescription(self.heightentry, _("Page height"))
self.heightentry.pack(side=LEFT, padx=2)
self.portrait_val = StringVar(root)
self.landscape_val = StringVar(root)
self.portrait = TCheckbutton(self.panel, image='context_portrait', variable=self.portrait_val,
command=self.set_portrait, style='ToolBarCheckButton')
tooltips.AddDescription(self.portrait, _("Portrait"))
self.portrait.pack(side=LEFT, padx=2)
self.landscape = TCheckbutton(self.panel, image='context_landscape', variable=self.landscape_val,
command=self.set_landscape, style='ToolBarCheckButton')
tooltips.AddDescription(self.landscape, _("Landscape"))
self.landscape.pack(side=LEFT)
config.preferences.Subscribe(CHANGED, self.update_pref)
self.doc.Subscribe(PAGE, self.update_pref)
self.doc.Subscribe(UNDO, self.update_pref)
def __init__(self, parent):
CtxSubPanel.__init__(self, parent)
self.USER_SPECIFIC = _("<Custom Size>")
root = self.mw.root
self.var_format_name = StringVar(root)
self.var_format_name.set(config.preferences.default_paper_format)
self.page_orientation = config.preferences.default_page_orientation
label = TLabel(self.panel, text=_("Page:"))
label.pack(side=LEFT, padx=2)
self.page_formats = TCombobox(self.panel,
state='readonly',
postcommand=self.set_format,
values=self.make_formats(),
width=17,
style='ComboNormal',
textvariable=self.var_format_name)
tooltips.AddDescription(self.page_formats, _("Page formats"))
self.page_formats.pack(side=LEFT, padx=2)
#--------------
sep = FlatFrame(self.panel, width=5, height=2)
sep.pack(side=LEFT)
#--------------
var_width_number = DoubleVar(root)
var_height_number = DoubleVar(root)
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, var_width_number, var_width_unit)
self.var_height = LengthVar(10, unit, var_height_number,
var_height_unit)
jump = config.preferences.default_unit_jump
label = TLabel(self.panel, text=_("H:"))
label.pack(side=LEFT)
self.widthentry = TSpinbox(self.panel,
textvariable=var_width_number,
command=self.applyResize,
vartype=1,
min=5,
max=50000,
step=jump,
width=7)
tooltips.AddDescription(self.widthentry, _("Page width"))
self.widthentry.pack(side=LEFT, padx=2)
#--------------
sep = FlatFrame(self.panel, width=5, height=2)
sep.pack(side=LEFT)
#--------------
label = TLabel(self.panel, text=_("V:"))
label.pack(side=LEFT)
self.heightentry = TSpinbox(self.panel,
textvariable=var_height_number,
command=self.applyResize,
vartype=1,
min=5,
max=50000,
step=jump,
width=7)
tooltips.AddDescription(self.heightentry, _("Page height"))
self.heightentry.pack(side=LEFT, padx=2)
self.portrait_val = StringVar(root)
self.landscape_val = StringVar(root)
self.portrait = TCheckbutton(self.panel,
image='context_portrait',
variable=self.portrait_val,
command=self.set_portrait,
style='ToolBarCheckButton')
tooltips.AddDescription(self.portrait, _("Portrait"))
self.portrait.pack(side=LEFT, padx=2)
self.landscape = TCheckbutton(self.panel,
image='context_landscape',
variable=self.landscape_val,
command=self.set_landscape,
style='ToolBarCheckButton')
tooltips.AddDescription(self.landscape, _("Landscape"))
self.landscape.pack(side=LEFT)
config.preferences.Subscribe(CHANGED, self.update_pref)
self.doc.Subscribe(PAGE, self.update_pref)
self.doc.Subscribe(UNDO, self.update_pref)
def build_dlg(self):
if not self.builded:
cmds = self.mw.canvas.commands.Ellipse
label = TLabel(self.panel, text=_("Start:"))
label.pack(side=LEFT, padx=2)
self.entry_start = TSpinbox(self.panel,
var=0,
vartype=1,
textvariable=self.start,
min=-360,
max=360,
step=5,
width=6,
command=self.applyAngle)
self.entry_start.pack(side=LEFT, padx=2)
tooltips.AddDescription(self.entry_start,
_('Arc start point angle'))
#--------------
sep = FlatFrame(self.panel, width=5, height=2)
sep.pack(side=LEFT)
#--------------
label = TLabel(self.panel, text=_("End:"))
label.pack(side=LEFT, padx=2)
self.entry_end = TSpinbox(self.panel,
var=0,
vartype=1,
textvariable=self.end,
min=-360,
max=360,
step=5,
width=6,
command=self.applyAngle)
self.entry_end.pack(side=LEFT, padx=2)
tooltips.AddDescription(self.entry_end, _('Arc end point angle'))
b = TButton(self.panel,
command=self.ResetAngle,
style='Toolbutton',
image='context_arc_reset')
tooltips.AddDescription(b, _('Reset angles'))
b.pack(side=LEFT)
b = TButton(self.panel,
command=self.SwapAngle,
style='Toolbutton',
image='context_arc_swap')
tooltips.AddDescription(b, _('Swap angles'))
b.pack(side=LEFT)
b = TLabel(self.panel, image="toolbar_sep")
b.pack(side=LEFT)
b = TButton(self.panel,
command=cmds.EllipseArc.Invoke,
style='Toolbutton',
image='context_arc')
tooltips.AddDescription(b, _('to Arc'))
b.pack(side=LEFT)
b = TButton(self.panel,
command=cmds.EllipseChord.Invoke,
style='Toolbutton',
image='context_chord')
tooltips.AddDescription(b, _('to Chord'))
b.pack(side=LEFT)
b = TButton(self.panel,
command=cmds.EllipsePieSlice.Invoke,
style='Toolbutton',
image='context_pie')
tooltips.AddDescription(b, _('to Pie'))
b.pack(side=LEFT)
self.builded = 1
else:
obj = self.mw.document.CurrentObject()
if obj and obj.is_Ellipse:
start_angle = round(obj.start_angle / degrees, 2)
end_angle = round(obj.end_angle / degrees, 2)
self.entry_start.set_value(start_angle)
self.entry_end.set_value(end_angle)