def test_pull_is_dirty_if_target_arch_changes(
self,
mock_install_build_snaps,
mock_install_build_packages,
mock_enable_cross_compilation,
):
# Set the option to error on dirty/outdated steps
with snapcraft.config.CLIConfig() as cli_config:
cli_config.set_outdated_step_action(
snapcraft.config.OutdatedStepAction.ERROR
)
mock_install_build_packages.return_value = []
project_config = self.make_snapcraft_project(
textwrap.dedent(
"""\
parts:
part1:
plugin: nil
"""
)
)
project = Project(
snapcraft_yaml_file_path=self.snapcraft_yaml_file_path,
target_deb_arch="amd64",
)
project_config = project_loader.load_config(project)
# Pull it with amd64
lifecycle.execute(steps.PULL, project_config)
# Reset logging since we only care about the following
self.fake_logger = fixtures.FakeLogger(level=logging.INFO)
self.useFixture(self.fake_logger)
project = Project(
snapcraft_yaml_file_path=self.snapcraft_yaml_file_path,
target_deb_arch="armhf",
)
project_config = project_loader.load_config(project)
# Pull it again with armhf. Should catch that the part needs to be
# re-pulled due to the change in target architecture and raise an
# error.
raised = self.assertRaises(
errors.StepOutdatedError, lifecycle.execute, steps.PULL, project_config
)
self.assertThat(
self.fake_logger.output, Contains("Setting target machine to 'armhf'")
)
self.assertThat(raised.step, Equals(steps.PULL))
self.assertThat(raised.part, Equals("part1"))
self.assertThat(
raised.report,
Equals("The 'deb_arch' project option appears to have changed.\n"),
)
def test_plugs_as_properties_should_fail(self):
self.data += ' plugs: [plug1]'
self.make_snapcraft_yaml(self.data)
with self.assertRaises(SystemExit):
project_loader.load_config()
expected_message = self.expected_message_template.format('plugs')
self.assertIn(expected_message, self.fake_logger.output)
def test_pull_is_dirty_if_target_arch_changes(
self, mock_install_build_packages, mock_enable_cross_compilation
):
mock_install_build_packages.return_value = []
project_config = self.make_snapcraft_project(
textwrap.dedent(
"""\
parts:
part1:
plugin: nil
"""
)
)
project = Project(
snapcraft_yaml_file_path=self.snapcraft_yaml_file_path,
target_deb_arch="amd64",
)
project_config = project_loader.load_config(project)
# Pull it with amd64
lifecycle.execute(steps.PULL, project_config)
# Reset logging since we only care about the following
self.fake_logger = fixtures.FakeLogger(level=logging.INFO)
self.useFixture(self.fake_logger)
project = Project(
snapcraft_yaml_file_path=self.snapcraft_yaml_file_path,
target_deb_arch="armhf",
)
project_config = project_loader.load_config(project)
# Pull it again with armhf. Should catch that the part needs to be
# re-pulled due to the change in target architecture and raise an
# error.
raised = self.assertRaises(
errors.StepOutdatedError, lifecycle.execute, steps.PULL, project_config
)
self.assertThat(
self.fake_logger.output, Equals("Setting target machine to 'armhf'\n")
)
self.assertThat(raised.step, Equals(steps.PULL))
self.assertThat(raised.part, Equals("part1"))
self.assertThat(
raised.report,
Equals("The 'deb_arch' project option appears to have changed.\n"),
)
def clean(project_options, parts, step=None):
# step defaults to None because that's how it comes from docopt when it's
# not set.
if not step:
step = steps.PULL
if not parts and step == steps.PULL:
_cleanup_common_directories_for_step(step, project_options)
return
config = project_loader.load_config(project_options)
if not parts and step <= steps.PRIME:
# If we've been asked to clean stage or prime without being given
# specific parts, just blow away those directories instead of
# doing it per part (it would just be a waste of time).
_cleanup_common_directories_for_step(
step, project_options, parts=config.all_parts
)
# No need to continue if that's all that was required
if step >= steps.STAGE:
return
if parts:
config.parts.validate(parts)
else:
parts = [part.name for part in config.all_parts]
staged_state = config.get_project_state(steps.STAGE)
primed_state = config.get_project_state(steps.PRIME)
_clean_parts(parts, step, config, staged_state, primed_state)
_cleanup_common_directories(config, project_options)
def refresh(debug, **kwargs):
"""Refresh an existing LXD container.
\b
Examples:
snapcraft refresh
This will take care of updating the apt package cache, upgrading packages
as needed as well as refreshing snaps.
"""
build_environment = env.BuilderEnvironmentConfig()
if build_environment.is_host:
raise errors.SnapcraftEnvironmentError(
"The 'refresh' command only applies to LXD containers but "
"SNAPCRAFT_BUILD_ENVIRONMENT is not set or set to host.\n"
"Maybe you meant to update the parts cache instead? "
"You can do that with the following command:\n\n"
"snapcraft update")
project = get_project(**kwargs, debug=debug)
config = project_loader.load_config(project)
lxd.Project(
project_options=project,
output=None,
source=os.path.curdir,
metadata=config.get_metadata(),
).refresh()
def make_snapcraft_project(self, snapcraft_yaml, project_kwargs=None):
snapcraft_yaml_file_path = self.make_snapcraft_yaml(snapcraft_yaml)
if project_kwargs is None:
project_kwargs = dict()
project = _Project(snapcraft_yaml_file_path=snapcraft_yaml_file_path,
**project_kwargs)
return project_loader.load_config(project)
def clean(project_options, parts, step=None):
# step defaults to None because that's how it comes from docopt when it's
# not set.
if not step:
step = steps.PULL
if not parts and step == steps.PULL:
_cleanup_common_directories_for_step(step, project_options)
return
config = project_loader.load_config(project_options)
if not parts and step <= steps.PRIME:
# If we've been asked to clean stage or prime without being given
# specific parts, just blow away those directories instead of
# doing it per part (it would just be a waste of time).
_cleanup_common_directories_for_step(
step, project_options, parts=config.all_parts
)
# No need to continue if that's all that was required
if step >= steps.STAGE:
return
if parts:
config.parts.validate(parts)
else:
parts = [part.name for part in config.all_parts]
staged_state = config.get_project_state(steps.STAGE)
primed_state = config.get_project_state(steps.PRIME)
_clean_parts(parts, step, config, staged_state, primed_state)
_cleanup_common_directories(config, project_options)
def make_snapcraft_project(self, common_id):
yaml = textwrap.dedent(
"""\
name: test
base: core18
version: "1.0"
summary: test
description: test
confinement: strict
grade: stable
adopt-info: part
apps:
test-app:
command: echo
common-id: {common_id}
parts:
part:
plugin: nil
parse-info: ["1.metainfo.xml", "2.metainfo.xml"]
"""
)
yaml_path = self.make_snapcraft_yaml(yaml.format(common_id=common_id))
project = Project(snapcraft_yaml_file_path=yaml_path)
return project_loader.load_config(project)
def generate_meta_yaml(
self, *, build=False, actual_prime_dir=None, snapcraft_yaml_file_path=None
):
if snapcraft_yaml_file_path is None:
snapcraft_yaml_file_path = self.snapcraft_yaml_file_path
os.makedirs("snap", exist_ok=True)
with open(snapcraft_yaml_file_path, "w") as f:
f.write(yaml_utils.dump(self.config_data))
self.project = Project(snapcraft_yaml_file_path=snapcraft_yaml_file_path)
if actual_prime_dir is not None:
self.project._prime_dir = actual_prime_dir
self.meta_dir = os.path.join(self.project.prime_dir, "meta")
self.hooks_dir = os.path.join(self.meta_dir, "hooks")
self.snap_yaml = os.path.join(self.meta_dir, "snap.yaml")
self.config = project_loader.load_config(project=self.project)
if build:
for part in self.config.parts.all_parts:
part.pull()
part.build()
part.stage()
part.prime()
_snap_packaging.create_snap_packaging(self.config)
self.assertTrue(os.path.exists(self.snap_yaml), "snap.yaml was not created")
with open(self.snap_yaml) as f:
return yaml_utils.load(f)
def refresh(debug, **kwargs):
"""Refresh an existing LXD container.
\b
Examples:
snapcraft refresh
This will take care of updating the apt package cache, upgrading packages
as needed as well as refreshing snaps.
"""
container_config = env.get_container_config()
if not container_config.use_container:
raise errors.SnapcraftEnvironmentError(
"The 'refresh' command only applies to LXD containers but "
"SNAPCRAFT_CONTAINER_BUILDS is not set or 0.\n"
"Maybe you meant to update the parts cache instead? "
"You can do that with the following command:\n\n"
"snapcraft update")
project_options = get_project_options(**kwargs, debug=debug)
config = project_loader.load_config(project_options)
lxd.Project(project_options=project_options,
remote=container_config.remote,
output=None,
source=os.path.curdir,
metadata=config.get_metadata()).refresh()
def refresh(debug, **kwargs):
"""Refresh an existing LXD container.
\b
Examples:
snapcraft refresh
This will take care of updating the apt package cache, upgrading packages
as needed as well as refreshing snaps.
"""
build_environment = env.BuilderEnvironmentConfig()
if build_environment.is_host:
raise errors.SnapcraftEnvironmentError(
"The 'refresh' command only applies to LXD containers but "
"SNAPCRAFT_BUILD_ENVIRONMENT is not set or set to host.\n"
"Maybe you meant to update the parts cache instead? "
"You can do that with the following command:\n\n"
"snapcraft update"
)
project = get_project(**kwargs, debug=debug)
config = project_loader.load_config(project)
lxd.Project(
project_options=project,
output=None,
source=os.path.curdir,
metadata=config.get_metadata(),
).refresh()
def clean(project_options, parts, step=None):
# step defaults to None because that's how it comes from docopt when it's
# not set.
if not step:
step = 'pull'
if not parts and step == 'pull':
_cleanup_common_directories_for_step(step, project_options)
return
config = project_loader.load_config()
if not parts and (step == 'stage' or step == 'prime'):
# If we've been asked to clean stage or prime without being given
# specific parts, just blow away those directories instead of
# doing it per part.
_cleanup_common_directories_for_step(step,
project_options,
parts=config.all_parts)
return
if parts:
config.parts.validate(parts)
else:
parts = [part.name for part in config.all_parts]
staged_state = config.get_project_state('stage')
primed_state = config.get_project_state('prime')
_clean_parts(parts, step, config, staged_state, primed_state)
_cleanup_common_directories(config, project_options)
def cleanbuild(remote, debug, **kwargs):
"""Create a snap using a clean environment managed by a build provider.
\b
Examples:
snapcraft cleanbuild
The cleanbuild command requires a properly setup lxd environment that
can connect to external networks. Refer to the "Ubuntu Desktop and
Ubuntu Server" section on
https://linuxcontainers.org/lxd/getting-started-cli
to get started.
If using a remote, a prior setup is required which is described on:
https://linuxcontainers.org/lxd/getting-started-cli/#multiple-hosts
"""
project = get_project(**kwargs, debug=debug)
project_config = project_loader.load_config(project)
# cleanbuild is a special snow flake, while all the other commands
# would work with the host as the build_provider it makes little
# sense in this scenario.
build_environment = env.BuilderEnvironmentConfig(
default="lxd", additional_providers=["multipass"]
)
lifecycle.cleanbuild(
project=project,
project_config=project_config,
echoer=echo,
remote=remote,
build_environment=build_environment,
)
def clean(parts, step_name, **kwargs):
"""Remove content - cleans downloads, builds or install artifacts.
\b
Examples:
snapcraft clean
snapcraft clean my-part --step build
"""
try:
project = get_project(**kwargs)
except YamlValidationError:
# We need to be able to clean invalid projects too.
project = get_project(skip_snapcraft_yaml=True, **kwargs)
build_environment = env.BuilderEnvironmentConfig()
step = None
if step_name:
if step_name == "strip":
echo.warning(
"DEPRECATED: Use `prime` instead of `strip` as the step to clean"
)
step_name = "prime"
step = steps.get_step_by_name(step_name)
if build_environment.is_host:
lifecycle.clean(project, parts, step)
else:
project_config = project_loader.load_config(project)
lxd.Project(
project_options=project,
output=None,
source=os.path.curdir,
metadata=project_config.get_metadata(),
).clean(parts, step)
def get_project_config(snapcraft_yaml_content):
snapcraft_yaml_path = pathlib.Path("Snapcraft.yaml")
with snapcraft_yaml_path.open("w") as snapcraft_yaml_file:
print(snapcraft_yaml_content, file=snapcraft_yaml_file)
project = Project(snapcraft_yaml_file_path=snapcraft_yaml_path.as_posix())
return project_loader.load_config(project)
def make_snapcraft_project(self, snapcraft_yaml, project_kwargs=None):
snapcraft_yaml_file_path = self.make_snapcraft_yaml(snapcraft_yaml)
if project_kwargs is None:
project_kwargs = dict()
project = _Project(
snapcraft_yaml_file_path=snapcraft_yaml_file_path, **project_kwargs
)
return project_loader.load_config(project)
def _execute( # noqa: C901
step: steps.Step,
parts: str,
pack_project: bool = False,
output: str = None,
shell: bool = False,
shell_after: bool = False,
destructive_mode: bool = False,
**kwargs) -> "Project":
# fmt: on
provider = "host" if destructive_mode else None
build_environment = env.BuilderEnvironmentConfig(force_provider=provider)
project = get_project(is_managed_host=build_environment.is_managed_host,
**kwargs)
conduct_project_sanity_check(project)
if build_environment.is_managed_host or build_environment.is_host:
project_config = project_loader.load_config(project)
lifecycle.execute(step, project_config, parts)
if pack_project:
_pack(project.prime_dir, output=output)
else:
build_provider_class = build_providers.get_provider_for(
build_environment.provider)
echo.info("Launching a VM.")
with build_provider_class(project=project, echoer=echo) as instance:
instance.mount_project()
try:
if shell:
# shell means we want to do everything right up to the previous
# step and then go into a shell instead of the requested step.
# the "snap" target is a special snowflake that has not made its
# way to be a proper step.
previous_step = None
if pack_project:
previous_step = steps.PRIME
elif step > steps.PULL:
previous_step = step.previous_step()
# steps.PULL is the first step, so we would directly shell into it.
if previous_step:
instance.execute_step(previous_step)
elif pack_project:
instance.pack_project(output=output)
else:
instance.execute_step(step)
except Exception:
if project.debug:
instance.shell()
else:
echo.warning(
"Run the same command again with --debug to shell into the environment "
"if you wish to introspect this failure.")
raise
else:
if shell or shell_after:
instance.shell()
return project
def make_snapcraft_project(self, *, confinement: str):
snapcraft_yaml = fixture_setup.SnapcraftYaml(self.path)
snapcraft_yaml.data["confinement"] = confinement
snapcraft_yaml.update_part("test-part", dict(plugin="nil"))
self.useFixture(snapcraft_yaml)
project = Project(
snapcraft_yaml_file_path=snapcraft_yaml.snapcraft_yaml_file_path)
return project_loader.load_config(project)
def test_part_order_consistency(self):
"""Test that parts are always processed in the same order."""
self.make_snapcraft_yaml(self.contents)
config = project_loader.load_config()
self.assertThat(config.all_parts, HasLength(len(self.expected_order)))
for part, expected_name in zip(config.all_parts, self.expected_order):
self.expectThat(part.name, Equals(expected_name))
def make_snapcraft_project(self, parts):
snapcraft_yaml = fixture_setup.SnapcraftYaml(self.path)
snapcraft_yaml.update_part("part1", dict(plugin="nil"))
for part_name, part in parts:
snapcraft_yaml.update_part(part_name, part)
self.useFixture(snapcraft_yaml)
project = Project(
snapcraft_yaml_file_path=snapcraft_yaml.snapcraft_yaml_file_path)
return project_loader.load_config(project)
def make_snapcraft_project(self, apps):
snapcraft_yaml = fixture_setup.SnapcraftYaml(self.path)
snapcraft_yaml.update_part("part1", dict(plugin="nil"))
for app_name, app in apps:
snapcraft_yaml.update_app(app_name, app)
self.useFixture(snapcraft_yaml)
p = project.Project(
snapcraft_yaml_file_path=snapcraft_yaml.snapcraft_yaml_file_path)
return load_config(p)
def get_project_config(snapcraft_yaml_content, target_deb_arch=None):
snapcraft_yaml_path = pathlib.Path("Snapcraft.yaml")
with snapcraft_yaml_path.open("w") as snapcraft_yaml_file:
print(snapcraft_yaml_content, file=snapcraft_yaml_file)
snapcraft_project = project.Project(
snapcraft_yaml_file_path=snapcraft_yaml_path.as_posix(),
target_deb_arch=target_deb_arch,
)
return load_config(snapcraft_project)
def make_snapcraft_project(self, *, confinement: str):
snapcraft_yaml = fixture_setup.SnapcraftYaml(self.path)
snapcraft_yaml.data["confinement"] = confinement
snapcraft_yaml.update_part("test-part", dict(plugin="nil"))
self.useFixture(snapcraft_yaml)
project = Project(
snapcraft_yaml_file_path=snapcraft_yaml.snapcraft_yaml_file_path
)
return project_loader.load_config(project)
def test_load_with_dummy_repo(self, os_release_mock):
self.make_snapcraft_yaml(dedent("""\
name: test
version: "1"
summary: test
description: test
confinement: strict
parts:
part1:
source: https://github.com/snapcore/snapcraft.git
plugin: python
stage-packages: [fswebcam]
snap: [foo]
"""))
# Ensure the dummy repo returns an empty set for required
# build tools.
project_loader.load_config()
def _execute(step: steps.Step, parts, **kwargs):
project = get_project(**kwargs)
project_config = project_loader.load_config(project)
build_environment = env.BuilderEnvironmentConfig()
if build_environment.is_host:
lifecycle.execute(step, project_config, parts)
else:
# containerbuild takes a snapcraft command name, not a step
lifecycle.containerbuild(step.name, project_config, parts)
return project
def make_snapcraft_project(self, parts):
snapcraft_yaml = fixture_setup.SnapcraftYaml(self.path)
snapcraft_yaml.update_part("part1", dict(plugin="nil"))
for part_name, part in parts:
snapcraft_yaml.update_part(part_name, part)
self.useFixture(snapcraft_yaml)
project = Project(
snapcraft_yaml_file_path=snapcraft_yaml.snapcraft_yaml_file_path
)
return project_loader.load_config(project)
def test_load_with_dummy_repo(self, os_release_mock):
self.make_snapcraft_yaml(
dedent("""\
name: test
version: "1"
summary: test
description: test
confinement: strict
parts:
part1:
source: https://github.com/snapcore/snapcraft.git
plugin: python
stage-packages: [fswebcam]
snap: [foo]
"""))
# Ensure the dummy repo returns an empty set for required
# build tools.
project_loader.load_config()
def test_slash_warning(self, mock_loadPlugin):
fake_logger = fixtures.FakeLogger(level=logging.WARN)
self.useFixture(fake_logger)
self.make_snapcraft_yaml("""name: test
version: "1"
summary: test
description: test
confinement: strict
parts:
part/1:
plugin: go
stage-packages: [fswebcam]
""")
project_loader.load_config()
self.assertThat(fake_logger.output, Contains(
'DEPRECATED: Found a "/" in the name of the {!r} part'.format(
'part/1')))
def _get_snap_packaging(self, **yaml_args):
if "parts" not in yaml_args:
yaml_args["parts"] = dict(part1=dict(plugin="nil"))
snapcraft_yaml = fixture_setup.SnapcraftYaml(self.path, **yaml_args)
self.useFixture(snapcraft_yaml)
project = Project(
snapcraft_yaml_file_path=snapcraft_yaml.snapcraft_yaml_file_path)
config = load_config(project)
return _SnapPackaging(project_config=config, extracted_metadata=None)
def update(ctx, **kwargs):
"""Updates the parts listing from the cloud."""
# Update in the container so that it will use the parts at build time
build_environment = env.BuilderEnvironmentConfig()
if not build_environment.is_host:
project = get_project(**kwargs)
project_config = project_loader.load_config(project)
lifecycle.containerbuild("update", project_config)
# Parts can be defined and searched from any folder on the host, so
# regardless of using containers we always update these as well
remote_parts.update()
def test_snap_deprecation(self, mock_loadPlugin):
"""Test that using the 'snap' keyword results in a warning."""
fake_logger = fixtures.FakeLogger(level=logging.WARN)
self.useFixture(fake_logger)
self.make_snapcraft_yaml("""name: test
version: "1"
summary: test
description: test
confinement: strict
parts:
part1:
plugin: go
stage-packages: [fswebcam]
snap: [foo]
""")
project_loader.load_config()
self.assertThat(fake_logger.output,
Contains(deprecations._deprecation_message('dn1')))
def cleanbuild(*, project, echoer, build_environment, remote='') -> None:
config = project_loader.load_config(project)
tar_filename = _create_tar_file(project.info.name)
if build_environment.is_lxd:
_deprecated_cleanbuild(project, remote, config, tar_filename)
return
build_provider_class = build_providers.get_provider_for('multipass')
with build_provider_class(project=project, echoer=echoer) as instance:
instance.provision_project(tar_filename)
instance.build_project()
instance.retrieve_snap()
def refresh(project):
series = storeapi.constants.DEFAULT_SERIES
project_config = project_loader.load_config(project)
snap_name = project_config.data["name"]
logger.info('Refreshing credentials to push and release "{}" snaps '
"to edge channel in series {}".format(snap_name, series))
packages = [{"name": snap_name, "series": series}]
channels = ["edge"]
_acquire_and_encrypt_credentials(packages, channels)
logger.info("Done. Please commit the changes to `{}` file.".format(
ENCRYPTED_CONFIG_FILENAME))
def test_create_gadget_meta_with_missing_gadget_yaml_raises_error(self):
self.config_data['type'] = 'gadget'
os.makedirs('snap', exist_ok=True)
with open(os.path.join('snap', 'snapcraft.yaml'), 'w') as f:
f.write(yaml.dump(self.config_data))
config = project_loader.load_config()
self.assertRaises(errors.MissingGadgetError,
_snap_packaging.create_snap_packaging,
self.config_data, config.parts, self.project_options,
'dummy')
def test_snap_deprecation(self):
"""Test that using the 'snap' keyword results in a warning."""
fake_logger = fixtures.FakeLogger(level=logging.WARN)
self.useFixture(fake_logger)
self.make_snapcraft_yaml("""name: test
version: "1"
summary: test
description: test
confinement: strict
parts:
part1:
plugin: go
stage-packages: [fswebcam]
snap: [foo]
""")
project_loader.load_config()
self.assertThat(fake_logger.output,
Contains(deprecations._deprecation_message('dn1')))
def test_slash_warning(self):
fake_logger = fixtures.FakeLogger(level=logging.WARN)
self.useFixture(fake_logger)
self.make_snapcraft_yaml("""name: test
version: "1"
summary: test
description: test
confinement: strict
parts:
part/1:
plugin: go
stage-packages: [fswebcam]
""")
project_loader.load_config()
self.assertThat(
fake_logger.output,
Contains(
'DEPRECATED: Found a "/" in the name of the {!r} part'.format(
'part/1')))
def refresh():
series = storeapi.constants.DEFAULT_SERIES
project_config = project_loader.load_config()
snap_name = project_config.data['name']
logger.info('Refreshing credentials to push and release "{}" snaps '
'to edge channel in series {}'.format(snap_name, series))
packages = [{'name': snap_name, 'series': series}]
channels = ['edge']
_acquire_and_encrypt_credentials(packages, channels)
logger.info('Done. Please commit the changes to `{}` file.'.format(
ENCRYPTED_CONFIG_FILENAME))
def test_get_parts_none(self):
self.make_snapcraft_yaml("""name: test
version: "1"
summary: test
description: test
confinement: strict
parts:
part1:
plugin: go
stage-packages: [fswebcam]
""")
config = project_loader.load_config(None)
self.assertThat(config.parts.get_part('not-a-part'), Equals(None))
def test_get_parts_none(self, mock_loadPlugin):
self.make_snapcraft_yaml("""name: test
version: "1"
summary: test
description: test
confinement: strict
parts:
part1:
plugin: go
stage-packages: [fswebcam]
""")
config = project_loader.load_config(None)
self.assertEqual(None, config.parts.get_part('not-a-part'))
def cleanbuild(project_options, remote=''):
if remote and not lxd._remote_is_valid(remote):
raise errors.InvalidContainerRemoteError(remote)
config = project_loader.load_config(project_options)
tar_filename = '{}_{}_source.tar.bz2'.format(config.data['name'],
config.data['version'])
with tarfile.open(tar_filename, 'w:bz2') as t:
t.add(os.path.curdir, filter=_create_tar_filter(tar_filename))
lxd.Cleanbuilder(source=tar_filename,
project_options=project_options,
metadata=config.get_metadata(),
remote=remote).execute()
def test_non_prime_and_no_version(self):
snapcraft_yaml = fixture_setup.SnapcraftYaml(self.path, version=None)
snapcraft_yaml.data["adopt-info"] = "test-part"
snapcraft_yaml.update_part(
"test-part",
{"plugin": "nil", "override-build": "snapcraftctl set-version 1.0"},
)
self.useFixture(snapcraft_yaml)
project = Project(
snapcraft_yaml_file_path=snapcraft_yaml.snapcraft_yaml_file_path
)
project_config = project_loader.load_config(project)
# This should not fail
lifecycle.execute(steps.PULL, project_config)
def enable(project):
series = storeapi.constants.DEFAULT_SERIES
project_config = project_loader.load_config(project)
snap_name = project_config.data["name"]
logger.info(
"Enabling Travis testbeds to push and release {!r} snaps "
"to edge channel in series {!r}".format(snap_name, series)
)
packages = [{"name": snap_name, "series": series}]
channels = ["edge"]
_acquire_and_encrypt_credentials(packages, channels)
logger.info(
'Configuring "deploy" phase to build and release the snap in the ' "Store."
)
with open(TRAVIS_CONFIG_FILENAME, "r+") as fd:
travis_conf = yaml.safe_load(fd)
# Enable 'sudo' capability and 'docker' service.
travis_conf["sudo"] = "required"
services = travis_conf.setdefault("services", [])
if "docker" not in services:
services.append("docker")
# Add a 'deploy' section with 'script' provider for building and
# release the snap within a xenial docker container.
travis_conf["deploy"] = {
"skip_cleanup": True,
"provider": "script",
"script": (
"docker run -v $(pwd):$(pwd) -t snapcore/snapcraft sh -c "
'"apt update -qq && cd $(pwd) && '
'snapcraft && snapcraft push *.snap --release edge"'
),
"on": {"branch": "master"},
}
fd.seek(0)
yaml.dump(travis_conf, fd, default_flow_style=False)
logger.info(
"Done. Now you just have to review and commit changes in your "
"Travis project (`{}`).\n"
"Also make sure you add the new `{}` file.".format(
TRAVIS_CONFIG_FILENAME, ENCRYPTED_CONFIG_FILENAME
)
)
def refresh(project):
series = storeapi.constants.DEFAULT_SERIES
project_config = project_loader.load_config(project)
snap_name = project_config.data["name"]
logger.info(
'Refreshing credentials to push and release "{}" snaps '
"to edge channel in series {}".format(snap_name, series)
)
packages = [{"name": snap_name, "series": series}]
channels = ["edge"]
_acquire_and_encrypt_credentials(packages, channels)
logger.info(
"Done. Please commit the changes to `{}` file.".format(
ENCRYPTED_CONFIG_FILENAME
)
)
def make_snapcraft_project(self, parts, snap_type=""):
yaml = textwrap.dedent(
"""\
name: test
version: 0
summary: test
description: test
confinement: strict
grade: stable
{type}
{parts}
"""
)
self.snapcraft_yaml_file_path = self.make_snapcraft_yaml(
yaml.format(parts=parts, type=snap_type)
)
project = snapcraft.project.Project(
snapcraft_yaml_file_path=self.snapcraft_yaml_file_path
)
return project_loader.load_config(project)