def test_ft_vlan_delete_with_member():
"""
Author: Surendra Kumar Vella ([email protected])
Verify that user is not able to delete a valn till its members are deleted
"""
vars = st.ensure_min_topology("D1T1:1")
st.log(
"Adding TGen connected interfaces to newly created vlan in tagging mode."
)
if not vlan.add_vlan_member(vars.D1,
sc_data.vlan, [vars.D1D2P1],
tagging_mode=True,
cli_type=sc_data.cli_type):
st.report_fail("vlan_tagged_member_fail", vars.D1D2P1, sc_data.vlan)
st.log("checking whether vlan with member is deleted or not ")
if not st.is_community_build(vars.D1):
if vlan.delete_vlan(vars.D1, sc_data.vlan, cli_type="click"):
st.report_fail("vlan_deletion_successfull_albiet_having_member",
sc_data.vlan)
if not vlan.delete_vlan_member(
vars.D1, sc_data.vlan, vars.D1D2P1, cli_type=sc_data.cli_type):
st.report_fail("vlan_tagged_member_fail", vars.D1D2P1,
sc_data.vlan)
else:
if not vlan.delete_vlan(vars.D1, sc_data.vlan, cli_type="click"):
st.report_fail("vlan_delete_fail", sc_data.vlan)
st.log("deleting the vlan after its member deletion")
st.report_pass("test_case_passed")
def snmp_pre_config():
"""
SNMP pre config
"""
global ipaddress
ipaddress_list = basic_obj.get_ifconfig_inet(vars.D1, data.mgmt_int)
st.log("Checking Ip address of the Device ")
if not ipaddress_list:
st.report_env_fail("ip_verification_fail")
ipaddress = ipaddress_list[0]
st.log("Device ip addresse - {}".format(ipaddress))
snmp_obj.set_snmp_config(vars.D1,
snmp_rocommunity=data.ro_community,
snmp_location=data.location)
if not st.is_community_build():
ipfeature.configure_loopback(vars.D1,
loopback_name="Loopback0",
config="yes")
ipfeature.config_ip_addr_interface(vars.D1,
data.loopback0,
data.loopback_addr,
32,
family=data.af_ipv4)
if not ipfeature.ping(vars.D1, ipaddress, family='ipv4', external=True):
st.error("Ping reachability is failed between SNMP server and Device.")
if not snmp_obj.poll_for_snmp(vars.D1,
data.wait_time,
1,
ipaddress=ipaddress,
oid=data.oid_sysName,
community_name=data.ro_community):
st.log("Post SNMP config , snmp is not working")
st.report_fail("operation_failed")
def vlan_module_prolog():
"""
Module prolog for module configuration
:return:
"""
st.log("Creating vlan in device and adding members ...")
vlan.create_vlan_and_add_members(sc_data.vlan_data,
cli_type=sc_data.cli_type)
if not st.is_community_build(vars.D1):
st.banner("Configuring BUM Storm control on interfaces")
interface_list = [vars.D1T1P1, vars.D1T1P2]
storm_control_type = [
"broadcast", "unknown-multicast", "unknown-unicast"
]
for interface in interface_list:
for stc_type in storm_control_type:
scapi.config(vars.D1,
type=stc_type,
action="add",
interface_name=interface,
bits_per_sec=sc_data.kbps,
cli_type="click")
if not scapi.verify_config(vars.D1,
interface_name=interface,
type=stc_type,
rate=sc_data.kbps,
cli_type="click"):
st.report_fail("storm_control_config_verify_failed",
stc_type, interface)
def set_status(dut, portlist, status):
"""
:param dut:
:type dut:
:param portlist:
:type portlist:
:param status: "shutdown" or "startup"
:type status: string
:return:
:rtype:
"""
if '-' in portlist:
st.config(dut, "config interface {} {}".format(status, portlist))
return
if not st.is_community_build():
try:
port = ",".join(portlist)
return st.config(dut,
"config interface {} {}".format(status, port))
except Exception as exp:
st.warn("Failed to execute {} command - try alternative".format(
status))
for port in portlist:
try:
st.config(dut, "config interface {} {}".format(status, port))
except ValueError as ex:
st.warn("Failed to execute {} command - try alternative".format(
status))
st.config(dut, "config interface {} {}".format(port, status))
return ""
def vlan_postconfig():
if not st.is_community_build(vars.D1):
mac_obj.clear_mac(vars.D1, port=vars.D1T1P1, vlan=data.vlan)
else:
mac_obj.clear_mac(vars.D1)
vlan_obj.delete_vlan_member(vars.D1, data.vlan, [vars.D1T1P1, vars.D1T1P2])
vlan_obj.delete_vlan(vars.D1, data.vlan)
def f(dut):
if st.get_device_type(dut) in ["sonic", "vsonic"]:
if not st.is_community_build():
st.show(dut,
"show system status",
skip_error_check=True,
skip_tmpl=True)
def snmp_post_config():
"""
SNMP post config
"""
snmp_obj.restore_snmp_config(vars.D1)
if not st.is_community_build():
ipfeature.configure_loopback(vars.D1,
loopback_name="Loopback0",
config="no")
def clear_interface_counters(dut):
"""
Clear interface counters
Author : Prudvi Mangadu ([email protected])
:param dut:
:return:
"""
if st.is_community_build():
return st.config(dut, "sonic-clear counters")
else:
return st.show(dut, "show interfaces counters -c")
def show_specific_interface_counters(dut, interface_name):
"""
API to fetch the specific interface counters
:param dut:
:param interface_name:
:return:
"""
command = "show interfaces counters -a -i {}".format(interface_name)
if st.is_community_build():
command = "show interfaces counters -a | grep -w {}".format(
interface_name)
output = st.show(dut, command)
st.log(output)
return output
def storm_control_func_hooks(request):
bum_test_functions = [
"test_ft_stormcontrol_verification",
"test_ft_stormcontrol_portchannel_intf",
"test_ft_stormcontrol_incremental_bps_max_vlan",
"test_ft_stormcontrol_fast_reboot", "test_ft_stormcontrol_warm_reboot"
]
if request.function.func_name in bum_test_functions:
platform_check()
yield
if request.function.func_name == "test_ft_vlan_delete_with_member":
if st.is_community_build(vars.D1):
vlan.create_vlan_and_add_members(sc_data.vlan_data,
cli_type=sc_data.cli_type)
def _clear_vlan_configuration_helper(dut_list, cli_type="click"):
"""
Find and clear VLAN and its Members.
Author : Prudvi Mangadu ([email protected])
:param dut_list:
:return:
"""
dut_li = list(dut_list) if isinstance(dut_list, list) else [dut_list]
for dut in dut_li:
st.log("############## {} : VLAN Cleanup ################".format(dut))
if cli_type == 'click':
output = show_vlan_config(dut)
if st.is_community_build():
(vlans, commands) = ({}, [])
for eac in output:
(vid, member) = (eac['vid'], eac['member'])
if vid:
vlans[vid] = 1
if member:
command = "config vlan member del {} {}".format(
vid, member)
commands.append(command)
for vid in vlans.keys():
command = "config vlan del {}".format(vid)
commands.append(command)
st.config(dut, commands)
continue
# Get Vlan list
vlan_list = list(set([eac['vid'] for eac in output]))
# Get interface list
member_list = list(
set([eac['member'] for eac in output if eac['member'] != '']))
if member_list:
if not config_vlan_range_members(
dut, '1 4093', member_list, config='del',
skip_verify=True):
st.log("VLAN all member delete failed")
return False
if vlan_list:
if not delete_all_vlan(dut, cli_type=cli_type):
st.log("VLAN all delete failed")
return False
if cli_type == 'klish':
return delete_all_vlan(dut, cli_type=cli_type)
return True
def f(dut):
if st.get_device_type(dut) in ["sonic", "vsonic"]:
st.show(dut,
"show version",
skip_error_check=True,
skip_tmpl=True)
st.show(dut,
"show runningconfiguration all",
skip_error_check=True,
skip_tmpl=True)
if not st.is_community_build():
st.show(dut,
"show system status",
skip_error_check=True,
skip_tmpl=True)
def vlan_preconfig():
if not vlan_obj.create_vlan(vars.D1, data.vlan):
st.report_fail("vlan_create_fail", data.vlan)
if not st.is_community_build():
mac_obj.config_mac(vars.D1, data.source_mac, data.vlan, vars.D1T1P1)
st.log(
"Adding TGen-1 connected interface to newly created vlan in un tagging mode."
)
if not vlan_obj.add_vlan_member(
vars.D1, data.vlan, vars.D1T1P1, tagging_mode=False):
st.report_fail("vlan_untagged_member_fail", vars.D1T1P1, data.vlan)
st.log(
"Adding TGen-2 connected interface to newly created vlan in tagging mode."
)
if not vlan_obj.add_vlan_member(
vars.D1, data.vlan, vars.D1T1P2, tagging_mode=True):
st.report_fail("vlan_untagged_member_fail", vars.D1T1P2, data.vlan)
def show_interface_counters_detailed(dut, interface, filter_key=None):
"""
show interfaces counters detailed <interface>.
Author : Rakesh Kumar Vooturi ([email protected])
:param dut:
:param interface:
:return:
"""
command = "show interfaces counters detailed {}".format(interface)
if st.is_community_build():
output = st.show(dut, command, skip_error_check=True)
else:
output = st.show(dut, command)
if not filter_key:
return output
else:
if not output:
return False
return output[0][filter_key]
def vlan_module_epilog():
if not st.is_community_build(vars.D1):
interface_list = [vars.D1T1P1, vars.D1T1P2]
storm_control_type = [
"broadcast", "unknown-multicast", "unknown-unicast"
]
for interface in interface_list:
for stc_type in storm_control_type:
scapi.config(vars.D1,
type=stc_type,
action="del",
interface_name=interface,
bits_per_sec=sc_data.kbps,
cli_type="click")
vlan.clear_vlan_configuration(st.get_dut_names(),
thread=False,
cli_type="click")
portchannel.clear_portchannel_configuration(st.get_dut_names(),
thread=True)
def config_vlan_range(dut, vlan_range, config="add", skip_verify=False):
"""
Author: [email protected]
Creates/Deletes range of VLANs given as input.
:param dut:
:param vlan_range: range of VLAN IDs in string format, separator space: "first-VLAN last_VLAN".
can be list of strings.
:param config: flag which specifies to configure or unconfigure the cli. add for config, del for unconfig.
Default:add
:param skip_verify: True | False
:return True: The VLANs were successfully created or deleted.
:return False: Error in parameter passed.
"""
if config == "del":
st.log("Deleting range of vlans {}".format(vlan_range))
else:
st.log("Creating range of vlans {}".format(vlan_range))
vlan_range_list = list(vlan_range) if isinstance(vlan_range,
list) else [vlan_range]
commands = []
if st.is_community_build():
for vrange in vlan_range_list:
[range_min, range_max] = [int(vid) for vid in vrange.split()]
for vid in range(range_min, range_max + 1):
commands.append("config vlan {} {}".format(config, vid))
rv = st.config(dut, commands)
return _check_config_vlan_output(rv)
for vrange in vlan_range_list:
commands.append("config vlan range {} {}".format(config, vrange))
ver_flag = True
for command in commands:
# -w option displays warning, turned on so that existing vlans message can be checked
if not skip_verify: command += " -w"
rv = st.config(dut, command)
if not _check_config_vlan_output(rv):
ver_flag = False
return ver_flag
def config_vlan_interfaces(dut, vlan_data={}, config='yes', skip_error=False):
if config == 'yes' or config == 'add':
config = 'add'
elif config == 'no' or config == 'del':
config = 'del'
else:
st.error("Invalid config type {}".format(config))
return False
command = []
if config == 'del':
for if_name, if_data in vlan_data.items():
vlan_id = if_data['vlan_id']
range_cmd = False
if 'range' in if_data.keys():
range_ids = if_data['range']
if range_ids[0] < range_ids[1]:
range_min, range_max = range_ids[0], range_ids[1]
range_cmd = True
elif range_ids[0] > range_ids[1]:
range_min, range_max = range_ids[1], range_ids[0]
range_cmd = True
else:
vlan_id = range_ids[0]
for link_member in if_data['members']:
if not range_cmd:
cmd_str = "config vlan member {} {} {} ".format(
config, vlan_id, link_member)
command.append(cmd_str)
elif not st.is_community_build():
cmd_str = "config vlan member range {} {} {} {}".format(
config, range_min, range_max, link_member)
command.append(cmd_str)
else:
skip_error = True
for vid in range(range_min, range_max + 1):
cmd_str = "config vlan member {} {} {} ".format(
config, vid, link_member)
command.append(cmd_str)
try:
st.config(dut, command, skip_error_check=skip_error)
except Exception as e:
st.log(e)
return False
command = []
for if_name, if_data in vlan_data.items():
vlan_id = if_data['vlan_id']
range_cmd = False
if 'range' in if_data.keys():
range_ids = if_data['range']
if range_ids[0] < range_ids[1]:
range_min, range_max = range_ids[0], range_ids[1]
range_cmd = True
elif range_ids[0] > range_ids[1]:
range_min, range_max = range_ids[1], range_ids[0]
range_cmd = True
else:
vlan_id = range_ids[0]
if not range_cmd:
cmd_str = "sudo config vlan {} {} ".format(config, vlan_id)
command.append(cmd_str)
elif not st.is_community_build():
cmd_str = "sudo config vlan range {} {} {}".format(
config, range_min, range_max)
command.append(cmd_str)
else:
for vid in range(range_min, range_max + 1):
cmd_str = "sudo config vlan {} {} ".format(config, vid)
command.append(cmd_str)
try:
st.config(dut, command)
except Exception as e:
st.log(e)
return False
command = []
if config == 'add':
for if_name, if_data in vlan_data.items():
vlan_id = if_data['vlan_id']
range_cmd = False
if 'range' in if_data.keys():
range_ids = if_data['range']
if range_ids[0] < range_ids[1]:
range_min, range_max = range_ids[0], range_ids[1]
range_cmd = True
elif range_ids[0] > range_ids[1]:
range_min, range_max = range_ids[1], range_ids[0]
range_cmd = True
else:
vlan_id = range_ids[0]
for link_member in if_data['members']:
if not range_cmd:
cmd_str = "config vlan member {} {} {} ".format(
config, vlan_id, link_member)
command.append(cmd_str)
elif not st.is_community_build():
cmd_str = "config vlan member range {} {} {} {}".format(
config, range_min, range_max, link_member)
command.append(cmd_str)
else:
for vid in range(range_min, range_max + 1):
cmd_str = "config vlan member {} {} {} ".format(
config, vid, link_member)
command.append(cmd_str)
try:
st.config(dut, command)
except Exception as e:
st.log(e)
return False
return True
def clear_interface_counters(dut):
if st.is_community_build():
return st.config(dut, "sonic-clear counters")
else:
return st.show(dut, "show interfaces counters -c")
def config_vlan_range_members(dut,
vlan_range,
port,
config="add",
skip_verify=False,
skip_error=False):
"""
Author: [email protected]
Add or remove given member ports to range of VLANs given as input.
:param dut:
:param vlan_range: range of VLAN IDs in string format "first-VLAN last_VLAN". can be list of strings.
:param port: port or list of ports which needs to be added / deleted to vlan_range
:param config: flag which specifies to configure or unconfigure the cli.
add for config, del for unconfig. Default:add
:param skip_verify: True | False
:param skip_error: True | False
:return True: Member ports successfully added or deleted to vlan range.
:return False: Error in parameter passed.
"""
if config == "del":
st.log("Deleting member ports from range of vlans")
else:
st.log("Adding member ports to range of vlans")
vlan_range_list = list(vlan_range) if isinstance(vlan_range,
list) else [vlan_range]
port_list = list(port) if isinstance(port, list) else [port]
entries = []
for vlan_range in vlan_range_list:
for each_port in port_list:
if not st.is_community_build():
command = "config vlan member range {} {} {}".format(
config, vlan_range, each_port)
entries.append([command, each_port, vlan_range])
else:
[range_min,
range_max] = [int(vid) for vid in vlan_range.split()]
for vid in range(range_min, range_max + 1):
command = "config vlan member {} {} {}".format(
config, vid, each_port)
entries.append([command, each_port, vid])
if st.is_community_build() and config == "del":
skip_error = True
ver_flag = True
for [command, each_port, vlan_range] in entries:
if not skip_verify and not st.is_community_build():
# -w option displays warning, turned on so that existing vlans message can be checked
command += " -w"
output = st.config(dut, command, skip_error_check=skip_error)
if "is already a member of Vlan" in output:
st.error("{} is already a member of Vlan{}".format(
each_port, vlan_range))
ver_flag = False
if "doesn't exist" in output:
st.error(" Vlan{} doesn't exist".format(vlan_range))
ver_flag = False
return ver_flag