def res_make_tag_fizzler(vmf: VMF, inst: Entity, res: Property): """Add an Aperture Tag Paint Gun activation fizzler. These fizzlers are created via signs, and work very specially. MUST be priority -100 so it runs before fizzlers! """ import vbsp if vbsp_options.get(str, 'game_id') != utils.STEAM_IDS['TAG']: # Abort - TAG fizzlers shouldn't appear in any other game! inst.remove() return fizz_base = fizz_name = None # Look for the fizzler instance we want to replace for targetname in inst.output_targets(): if targetname in tag_fizzlers: fizz_name = targetname fizz_base = tag_fizzlers[targetname] del tag_fizzlers[targetname] # Don't let other signs mod this one! continue else: # It's an indicator toggle, remove it and the antline to clean up. LOGGER.warning('Toggle: {}', targetname) for ent in vmf.by_target[targetname]: remove_ant_toggle(ent) inst.outputs.clear() # Remove the outptuts now, they're not valid anyway. if fizz_base is None: # No fizzler - remove this sign inst.remove() return # The distance from origin the double signs are seperated by. sign_offset = res.int('signoffset', 16) sign_loc = ( # The actual location of the sign - on the wall Vec.from_str(inst['origin']) + Vec(0, 0, -64).rotate_by_str(inst['angles']) ) # Now deal with the visual aspect: # Blue signs should be on top. blue_enabled = inst.fixup.bool('$start_enabled') oran_enabled = inst.fixup.bool('$start_reversed') # If True, single-color signs will also turn off the other color. # This also means we always show both signs. # If both are enabled or disabled, this has no effect. disable_other = ( not inst.fixup.bool('$disable_autorespawn', True) and blue_enabled != oran_enabled ) # Delete fixups now, they aren't useful. inst.fixup.clear() if not blue_enabled and not oran_enabled: # Hide the sign in this case! inst.remove() inst_angle = srctools.parse_vec_str(inst['angles']) inst_normal = Vec(0, 0, 1).rotate(*inst_angle) loc = Vec.from_str(inst['origin']) if disable_other or (blue_enabled and oran_enabled): inst['file'] = res['frame_double'] # On a wall, and pointing vertically if inst_normal.z == 0 and Vec(y=1).rotate(*inst_angle).z: # They're vertical, make sure blue's on top! blue_loc = Vec(loc.x, loc.y, loc.z + sign_offset) oran_loc = Vec(loc.x, loc.y, loc.z - sign_offset) # If orange is enabled, with two frames put that on top # instead since it's more important if disable_other and oran_enabled: blue_loc, oran_loc = oran_loc, blue_loc else: offset = Vec(0, sign_offset, 0).rotate(*inst_angle) blue_loc = loc + offset oran_loc = loc - offset else: inst['file'] = res['frame_single'] # They're always centered blue_loc = loc oran_loc = loc if inst_normal.z != 0: # If on floors/ceilings, rotate to point at the fizzler! sign_floor_loc = sign_loc.copy() sign_floor_loc.z = 0 # We don't care about z-positions. # Grab the data saved earlier in res_find_potential_tag_fizzlers() axis, side_min, side_max, normal = tag_fizzler_locs[fizz_name] # The Z-axis fizzler (horizontal) must be treated differently. if axis == 'z': # For z-axis, just compare to the center point. # The values are really x, y, z, not what they're named. sign_dir = sign_floor_loc - (side_min, side_max, normal) else: # For the other two, we compare to the line, # or compare to the closest side (in line with the fizz) other_axis = 'x' if axis == 'y' else 'y' if abs(sign_floor_loc[other_axis] - normal) < 32: # Compare to the closest side. Use ** to swap x/y arguments # appropriately. The closest side is the one with the # smallest magnitude. vmf.create_ent( classname='info_null', targetname=inst['targetname'] + '_min', origin=sign_floor_loc - Vec(**{ axis: side_min, other_axis: normal, }), ) vmf.create_ent( classname='info_null', targetname=inst['targetname'] + '_max', origin=sign_floor_loc - Vec(**{ axis: side_max, other_axis: normal, }), ) sign_dir = min( sign_floor_loc - Vec(**{ axis: side_min, other_axis: normal, }), sign_floor_loc - Vec(**{ axis: side_max, other_axis: normal, }), key=Vec.mag, ) else: # Align just based on whether we're in front or behind. sign_dir = Vec() sign_dir[other_axis] = sign_floor_loc[other_axis] - normal sign_angle = math.degrees( math.atan2(sign_dir.y, sign_dir.x) ) # Round to nearest 90 degrees # Add 45 so the switchover point is at the diagonals sign_angle = (sign_angle + 45) // 90 * 90 # Rotate to fit the instances - south is down sign_angle = int(sign_angle + 90) % 360 if inst_normal.z > 0: sign_angle = '0 {} 0'.format(sign_angle) elif inst_normal.z < 0: # Flip upside-down for ceilings sign_angle = '0 {} 180'.format(sign_angle) else: # On a wall, face upright sign_angle = PETI_INST_ANGLE[inst_normal.as_tuple()] # If disable_other, we show off signs. Otherwise we don't use that sign. blue_sign = 'blue_sign' if blue_enabled else 'blue_off_sign' if disable_other else None oran_sign = 'oran_sign' if oran_enabled else 'oran_off_sign' if disable_other else None if blue_sign: vmf.create_ent( classname='func_instance', file=res[blue_sign, ''], targetname=inst['targetname'], angles=sign_angle, origin=blue_loc.join(' '), ) if oran_sign: vmf.create_ent( classname='func_instance', file=res[oran_sign, ''], targetname=inst['targetname'], angles=sign_angle, origin=oran_loc.join(' '), ) # Now modify the fizzler... fizz_brushes = list( vmf.by_class['trigger_portal_cleanser'] & vmf.by_target[fizz_name + '_brush'] ) if 'base_inst' in res: fizz_base['file'] = resolve_inst(res['base_inst'])[0] fizz_base.outputs.clear() # Remove outputs, otherwise they break # branch_toggle entities # Subtract the sign from the list of connections, but don't go below # zero fizz_base.fixup['$connectioncount'] = str(max( 0, srctools.conv_int(fizz_base.fixup['$connectioncount', ''], 0) - 1 )) if 'model_inst' in res: model_inst = resolve_inst(res['model_inst'])[0] for mdl_inst in vmf.by_class['func_instance']: if mdl_inst['targetname', ''].startswith(fizz_name + '_model'): mdl_inst['file'] = model_inst # Find the direction the fizzler front/back points - z=floor fizz # Signs will associate with the given side! bbox_min, bbox_max = fizz_brushes[0].get_bbox() for axis, val in zip('xyz', bbox_max-bbox_min): if val == 2: fizz_axis = axis sign_center = (bbox_min[axis] + bbox_max[axis]) / 2 break else: # A fizzler that's not 128*x*2? raise Exception('Invalid fizzler brush ({})!'.format(fizz_name)) # Figure out what the sides will set values to... pos_blue = False pos_oran = False neg_blue = False neg_oran = False if sign_loc[fizz_axis] < sign_center: pos_blue = blue_enabled pos_oran = oran_enabled else: neg_blue = blue_enabled neg_oran = oran_enabled fizz_off_tex = { 'left': res['off_left'], 'center': res['off_center'], 'right': res['off_right'], 'short': res['off_short'], } fizz_on_tex = { 'left': res['on_left'], 'center': res['on_center'], 'right': res['on_right'], 'short': res['on_short'], } # If it activates the paint gun, use different textures if pos_blue or pos_oran: pos_tex = fizz_on_tex else: pos_tex = fizz_off_tex if neg_blue or neg_oran: neg_tex = fizz_on_tex else: neg_tex = fizz_off_tex if vbsp.GAME_MODE == 'COOP': # We need ATLAS-specific triggers pos_trig = vmf.create_ent( classname='trigger_playerteam', ) neg_trig = vmf.create_ent( classname='trigger_playerteam', ) output = 'OnStartTouchBluePlayer' else: pos_trig = vmf.create_ent( classname='trigger_multiple', ) neg_trig = vmf.create_ent( classname='trigger_multiple', spawnflags='1', ) output = 'OnStartTouch' pos_trig['origin'] = neg_trig['origin'] = fizz_base['origin'] pos_trig['spawnflags'] = neg_trig['spawnflags'] = '1' # Clients Only pos_trig['targetname'] = fizz_name + '-trig_pos' neg_trig['targetname'] = fizz_name + '-trig_neg' pos_trig.outputs = [ Output( output, fizz_name + '-trig_neg', 'Enable', ), Output( output, fizz_name + '-trig_pos', 'Disable', ), ] neg_trig.outputs = [ Output( output, fizz_name + '-trig_pos', 'Enable', ), Output( output, fizz_name + '-trig_neg', 'Disable', ), ] voice_attr = vbsp.settings['has_attr'] if blue_enabled or disable_other: # If this is blue/oran only, don't affect the other color neg_trig.outputs.append(Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_blue), )) pos_trig.outputs.append(Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_blue), )) if blue_enabled: # Add voice attributes - we have the gun and gel! voice_attr['bluegelgun'] = True voice_attr['bluegel'] = True voice_attr['bouncegun'] = True voice_attr['bouncegel'] = True if oran_enabled or disable_other: neg_trig.outputs.append(Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_oran), )) pos_trig.outputs.append(Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_oran), )) if oran_enabled: voice_attr['orangegelgun'] = True voice_attr['orangegel'] = True voice_attr['speedgelgun'] = True voice_attr['speedgel'] = True if not oran_enabled and not blue_enabled: # If both are disabled, we must shutdown the gun when touching # either side - use neg_trig for that purpose! # We want to get rid of pos_trig to save ents vmf.remove_ent(pos_trig) neg_trig['targetname'] = fizz_name + '-trig' neg_trig.outputs.clear() neg_trig.add_out(Output( output, '@BlueIsEnabled', 'SetValue', param='0' )) neg_trig.add_out(Output( output, '@OrangeIsEnabled', 'SetValue', param='0' )) for fizz_brush in fizz_brushes: # portal_cleanser ent, not solid! # Modify fizzler textures bbox_min, bbox_max = fizz_brush.get_bbox() for side in fizz_brush.sides(): norm = side.normal() if norm[fizz_axis] == 0: # Not the front/back: force nodraw # Otherwise the top/bottom will have the odd stripes # which won't match the sides side.mat = 'tools/toolsnodraw' continue if norm[fizz_axis] == 1: side.mat = pos_tex[ vbsp.TEX_FIZZLER[ side.mat.casefold() ] ] else: side.mat = neg_tex[ vbsp.TEX_FIZZLER[ side.mat.casefold() ] ] # The fizzler shouldn't kill cubes fizz_brush['spawnflags'] = '1' fizz_brush.outputs.append(Output( 'OnStartTouch', '@shake_global', 'StartShake', )) fizz_brush.outputs.append(Output( 'OnStartTouch', '@shake_global_sound', 'PlaySound', )) # The triggers are 8 units thick, 24 from the center # (-1 because fizzlers are 2 thick on each side). neg_min, neg_max = Vec(bbox_min), Vec(bbox_max) neg_min[fizz_axis] -= 23 neg_max[fizz_axis] -= 17 pos_min, pos_max = Vec(bbox_min), Vec(bbox_max) pos_min[fizz_axis] += 17 pos_max[fizz_axis] += 23 if blue_enabled or oran_enabled: neg_trig.solids.append( vmf.make_prism( neg_min, neg_max, mat='tools/toolstrigger', ).solid, ) pos_trig.solids.append( vmf.make_prism( pos_min, pos_max, mat='tools/toolstrigger', ).solid, ) else: # If neither enabled, use one trigger neg_trig.solids.append( vmf.make_prism( neg_min, pos_max, mat='tools/toolstrigger', ).solid, )
def res_make_tag_fizzler(vmf: VMF, inst: Entity, res: Property): """Add an Aperture Tag Paint Gun activation fizzler. These fizzlers are created via signs, and work very specially. This must be before -250 so it runs before fizzlers and connections. """ ( sign_offset, fizz_conn_conf, inst_frame_double, inst_frame_single, blue_sign_on, blue_sign_off, oran_sign_on, oran_sign_off, ) = res.value # type: int, Optional[connections.Config], str, str, str, str, str, str import vbsp if options.get(str, 'game_id') != utils.STEAM_IDS['TAG']: # Abort - TAG fizzlers shouldn't appear in any other game! inst.remove() return fizzler = None fizzler_item = None # Look for the fizzler instance we want to replace. sign_item = connections.ITEMS[inst['targetname']] for conn in list(sign_item.outputs): if conn.to_item.name in FIZZLERS: if fizzler is None: fizzler = FIZZLERS[conn.to_item.name] fizzler_item = conn.to_item else: raise ValueError('Multiple fizzlers attached to a sign!') conn.remove() # Regardless, remove the useless output. sign_item.delete_antlines() if fizzler is None: # No fizzler - remove this sign inst.remove() return if fizzler.fizz_type.id == TAG_FIZZ_ID: LOGGER.warning('Two tag signs attached to one fizzler...') inst.remove() return # Swap to the special Tag Fizzler type. fizzler.fizz_type = FIZZ_TYPES[TAG_FIZZ_ID] # And also swap the connection's type. if fizz_conn_conf is not None: fizzler_item.config = fizz_conn_conf fizzler_item.enable_cmd = fizz_conn_conf.enable_cmd fizzler_item.disable_cmd = fizz_conn_conf.disable_cmd fizzler_item.sec_enable_cmd = fizz_conn_conf.sec_enable_cmd fizzler_item.sec_disable_cmd = fizz_conn_conf.sec_disable_cmd sign_loc = ( # The actual location of the sign - on the wall Vec.from_str(inst['origin']) + Vec(0, 0, -64).rotate_by_str(inst['angles'])) fizz_norm_axis = fizzler.normal().axis() # Now deal with the visual aspect: # Blue signs should be on top. blue_enabled = inst.fixup.bool('$start_enabled') oran_enabled = inst.fixup.bool('$start_reversed') # If True, single-color signs will also turn off the other color. # This also means we always show both signs. # If both are enabled or disabled, this has no effect. disable_other = (not inst.fixup.bool('$disable_autorespawn', True) and blue_enabled != oran_enabled) # Delete fixups now, they aren't useful. inst.fixup.clear() if not blue_enabled and not oran_enabled: # Hide the sign in this case! inst.remove() inst_angle = srctools.parse_vec_str(inst['angles']) inst_normal = Vec(0, 0, 1).rotate(*inst_angle) loc = Vec.from_str(inst['origin']) if disable_other or (blue_enabled and oran_enabled): inst['file'] = inst_frame_double # On a wall, and pointing vertically if inst_normal.z == 0 and Vec(y=1).rotate(*inst_angle).z: # They're vertical, make sure blue's on top! blue_loc = Vec(loc.x, loc.y, loc.z + sign_offset) oran_loc = Vec(loc.x, loc.y, loc.z - sign_offset) # If orange is enabled, with two frames put that on top # instead since it's more important if disable_other and oran_enabled: blue_loc, oran_loc = oran_loc, blue_loc else: offset = Vec(0, sign_offset, 0).rotate(*inst_angle) blue_loc = loc + offset oran_loc = loc - offset else: inst['file'] = inst_frame_single # They're always centered blue_loc = loc oran_loc = loc if inst_normal.z != 0: # If on floors/ceilings, rotate to point at the fizzler! sign_floor_loc = sign_loc.copy() sign_floor_loc.z = 0 # We don't care about z-positions. s, l = Vec.bbox(itertools.chain.from_iterable(fizzler.emitters)) if fizz_norm_axis == 'z': # For z-axis, just compare to the center point of the emitters. sign_dir = ((s.x + l.x) / 2, (s.y + l.y) / 2, 0) - sign_floor_loc else: # For the other two, we compare to the line, # or compare to the closest side (in line with the fizz) if fizz_norm_axis == 'x': # Extends in Y direction other_axis = 'y' side_min = s.y side_max = l.y normal = s.x else: # Extends in X direction other_axis = 'x' side_min = s.x side_max = l.x normal = s.y # Right in line with the fizzler. Point at the closest emitter. if abs(sign_floor_loc[other_axis] - normal) < 32: # Compare to the closest side. sign_dir = min( (sign_floor_loc - Vec.with_axes( fizz_norm_axis, side_min, other_axis, normal, ), sign_floor_loc - Vec.with_axes( fizz_norm_axis, side_max, other_axis, normal, )), key=Vec.mag, ) else: # Align just based on whether we're in front or behind. sign_dir = Vec.with_axes( fizz_norm_axis, normal - sign_floor_loc[fizz_norm_axis]).norm() sign_yaw = math.degrees(math.atan2(sign_dir.y, sign_dir.x)) # Round to nearest 90 degrees # Add 45 so the switchover point is at the diagonals sign_yaw = (sign_yaw + 45) // 90 * 90 # Rotate to fit the instances - south is down sign_yaw = int(sign_yaw - 90) % 360 if inst_normal.z > 0: sign_angle = '0 {} 0'.format(sign_yaw) elif inst_normal.z < 0: # Flip upside-down for ceilings sign_angle = '0 {} 180'.format(sign_yaw) else: raise AssertionError('Cannot be zero here!') else: # On a wall, face upright sign_angle = PETI_INST_ANGLE[inst_normal.as_tuple()] # If disable_other, we show off signs. Otherwise we don't use that sign. blue_sign = blue_sign_on if blue_enabled else blue_sign_off if disable_other else None oran_sign = oran_sign_on if oran_enabled else oran_sign_off if disable_other else None if blue_sign: vmf.create_ent( classname='func_instance', file=blue_sign, targetname=inst['targetname'], angles=sign_angle, origin=blue_loc.join(' '), ) if oran_sign: vmf.create_ent( classname='func_instance', file=oran_sign, targetname=inst['targetname'], angles=sign_angle, origin=oran_loc.join(' '), ) # Now modify the fizzler... # Subtract the sign from the list of connections, but don't go below # zero fizzler.base_inst.fixup['$connectioncount'] = str( max( 0, srctools.conv_int(fizzler.base_inst.fixup['$connectioncount', '']) - 1)) # Find the direction the fizzler normal is. # Signs will associate with the given side! bbox_min, bbox_max = fizzler.emitters[0] sign_center = (bbox_min[fizz_norm_axis] + bbox_max[fizz_norm_axis]) / 2 # Figure out what the sides will set values to... pos_blue = False pos_oran = False neg_blue = False neg_oran = False if sign_loc[fizz_norm_axis] < sign_center: pos_blue = blue_enabled pos_oran = oran_enabled else: neg_blue = blue_enabled neg_oran = oran_enabled # If it activates the paint gun, use different textures fizzler.tag_on_pos = pos_blue or pos_oran fizzler.tag_on_neg = neg_blue or neg_oran # Now make the trigger ents. We special-case these since they need to swap # depending on the sign config and position. if vbsp.GAME_MODE == 'COOP': # We need ATLAS-specific triggers pos_trig = vmf.create_ent(classname='trigger_playerteam', ) neg_trig = vmf.create_ent(classname='trigger_playerteam', ) output = 'OnStartTouchBluePlayer' else: pos_trig = vmf.create_ent(classname='trigger_multiple', ) neg_trig = vmf.create_ent( classname='trigger_multiple', spawnflags='1', ) output = 'OnStartTouch' pos_trig['origin'] = neg_trig['origin'] = fizzler.base_inst['origin'] pos_trig['spawnflags'] = neg_trig['spawnflags'] = '1' # Clients Only pos_trig['targetname'] = local_name(fizzler.base_inst, 'trig_pos') neg_trig['targetname'] = local_name(fizzler.base_inst, 'trig_neg') pos_trig['startdisabled'] = neg_trig['startdisabled'] = ( not fizzler.base_inst.fixup.bool('start_enabled')) pos_trig.outputs = [ Output(output, neg_trig, 'Enable'), Output(output, pos_trig, 'Disable'), ] neg_trig.outputs = [ Output(output, pos_trig, 'Enable'), Output(output, neg_trig, 'Disable'), ] voice_attr = vbsp.settings['has_attr'] if blue_enabled or disable_other: # If this is blue/oran only, don't affect the other color neg_trig.outputs.append( Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_blue), )) pos_trig.outputs.append( Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_blue), )) if blue_enabled: # Add voice attributes - we have the gun and gel! voice_attr['bluegelgun'] = True voice_attr['bluegel'] = True voice_attr['bouncegun'] = True voice_attr['bouncegel'] = True if oran_enabled or disable_other: neg_trig.outputs.append( Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_oran), )) pos_trig.outputs.append( Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_oran), )) if oran_enabled: voice_attr['orangegelgun'] = True voice_attr['orangegel'] = True voice_attr['speedgelgun'] = True voice_attr['speedgel'] = True if not oran_enabled and not blue_enabled: # If both are disabled, we must shutdown the gun when touching # either side - use neg_trig for that purpose! # We want to get rid of pos_trig to save ents vmf.remove_ent(pos_trig) neg_trig['targetname'] = local_name(fizzler.base_inst, 'trig_off') neg_trig.outputs.clear() neg_trig.add_out( Output(output, '@BlueIsEnabled', 'SetValue', param='0')) neg_trig.add_out( Output(output, '@OrangeIsEnabled', 'SetValue', param='0')) # Make the triggers. for bbox_min, bbox_max in fizzler.emitters: bbox_min = bbox_min.copy() - 64 * fizzler.up_axis bbox_max = bbox_max.copy() + 64 * fizzler.up_axis # The triggers are 8 units thick, with a 32-unit gap in the middle neg_min, neg_max = Vec(bbox_min), Vec(bbox_max) neg_min[fizz_norm_axis] -= 24 neg_max[fizz_norm_axis] -= 16 pos_min, pos_max = Vec(bbox_min), Vec(bbox_max) pos_min[fizz_norm_axis] += 16 pos_max[fizz_norm_axis] += 24 if blue_enabled or oran_enabled: neg_trig.solids.append( vmf.make_prism( neg_min, neg_max, mat='tools/toolstrigger', ).solid, ) pos_trig.solids.append( vmf.make_prism( pos_min, pos_max, mat='tools/toolstrigger', ).solid, ) else: # If neither enabled, use one trigger neg_trig.solids.append( vmf.make_prism( neg_min, pos_max, mat='tools/toolstrigger', ).solid, )
def res_make_tag_fizzler(vmf: VMF, inst: Entity, res: Property): """Add an Aperture Tag Paint Gun activation fizzler. These fizzlers are created via signs, and work very specially. This must be before -250 so it runs before fizzlers and connections. """ ( sign_offset, fizz_io_type, inst_frame_double, inst_frame_single, blue_sign_on, blue_sign_off, oran_sign_on, oran_sign_off, ) = res.value # type: int, ItemType, str, str, str, str, str, str import vbsp if vbsp_options.get(str, 'game_id') != utils.STEAM_IDS['TAG']: # Abort - TAG fizzlers shouldn't appear in any other game! inst.remove() return fizzler = None fizzler_item = None # Look for the fizzler instance we want to replace. sign_item = ITEMS[inst['targetname']] for conn in list(sign_item.outputs): if conn.to_item.name in FIZZLERS: if fizzler is None: fizzler = FIZZLERS[conn.to_item.name] fizzler_item = conn.to_item else: raise ValueError('Multiple fizzlers attached to a sign!') conn.remove() # Regardless, remove the useless output. sign_item.delete_antlines() if fizzler is None: # No fizzler - remove this sign inst.remove() return if fizzler.fizz_type.id == TAG_FIZZ_ID: LOGGER.warning('Two tag signs attached to one fizzler...') inst.remove() return # Swap to the special Tag Fizzler type. fizzler.fizz_type = FIZZ_TYPES[TAG_FIZZ_ID] # And also swap the connection's type. fizzler_item.item_type = fizz_io_type fizzler_item.enable_cmd = fizz_io_type.enable_cmd fizzler_item.disable_cmd = fizz_io_type.disable_cmd fizzler_item.sec_enable_cmd = fizz_io_type.sec_enable_cmd fizzler_item.sec_disable_cmd = fizz_io_type.sec_disable_cmd sign_loc = ( # The actual location of the sign - on the wall Vec.from_str(inst['origin']) + Vec(0, 0, -64).rotate_by_str(inst['angles']) ) # Now deal with the visual aspect: # Blue signs should be on top. blue_enabled = inst.fixup.bool('$start_enabled') oran_enabled = inst.fixup.bool('$start_reversed') # If True, single-color signs will also turn off the other color. # This also means we always show both signs. # If both are enabled or disabled, this has no effect. disable_other = ( not inst.fixup.bool('$disable_autorespawn', True) and blue_enabled != oran_enabled ) # Delete fixups now, they aren't useful. inst.fixup.clear() if not blue_enabled and not oran_enabled: # Hide the sign in this case! inst.remove() inst_angle = srctools.parse_vec_str(inst['angles']) inst_normal = Vec(0, 0, 1).rotate(*inst_angle) loc = Vec.from_str(inst['origin']) if disable_other or (blue_enabled and oran_enabled): inst['file'] = inst_frame_double # On a wall, and pointing vertically if inst_normal.z == 0 and Vec(y=1).rotate(*inst_angle).z: # They're vertical, make sure blue's on top! blue_loc = Vec(loc.x, loc.y, loc.z + sign_offset) oran_loc = Vec(loc.x, loc.y, loc.z - sign_offset) # If orange is enabled, with two frames put that on top # instead since it's more important if disable_other and oran_enabled: blue_loc, oran_loc = oran_loc, blue_loc else: offset = Vec(0, sign_offset, 0).rotate(*inst_angle) blue_loc = loc + offset oran_loc = loc - offset else: inst['file'] = inst_frame_single # They're always centered blue_loc = loc oran_loc = loc if inst_normal.z != 0: # If on floors/ceilings, rotate to point at the fizzler! sign_floor_loc = sign_loc.copy() sign_floor_loc.z = 0 # We don't care about z-positions. # Grab the data saved earlier in res_find_potential_tag_fizzlers() axis, side_min, side_max, normal = calc_fizzler_orient(fizzler) # The Z-axis fizzler (horizontal) must be treated differently. if axis == 'z': # For z-axis, just compare to the center point. # The values are really x, y, z, not what they're named. sign_dir = sign_floor_loc - (side_min, side_max, normal) else: # For the other two, we compare to the line, # or compare to the closest side (in line with the fizz) other_axis = 'x' if axis == 'y' else 'y' if abs(sign_floor_loc[other_axis] - normal) < 32: # Compare to the closest side. Use ** to swap x/y arguments # appropriately. The closest side is the one with the # smallest magnitude. sign_dir = min( sign_floor_loc - Vec.with_axes( axis,side_min, other_axis, normal, ), sign_floor_loc - Vec.with_axes( axis, side_max, other_axis, normal, ), key=Vec.mag, ) else: # Align just based on whether we're in front or behind. sign_dir = Vec() sign_dir[other_axis] = sign_floor_loc[other_axis] - normal sign_angle = math.degrees( math.atan2(sign_dir.y, sign_dir.x) ) # Round to nearest 90 degrees # Add 45 so the switchover point is at the diagonals sign_angle = (sign_angle + 45) // 90 * 90 # Rotate to fit the instances - south is down sign_angle = int(sign_angle + 90) % 360 if inst_normal.z > 0: sign_angle = '0 {} 0'.format(sign_angle) elif inst_normal.z < 0: # Flip upside-down for ceilings sign_angle = '0 {} 180'.format(sign_angle) else: # On a wall, face upright sign_angle = PETI_INST_ANGLE[inst_normal.as_tuple()] # If disable_other, we show off signs. Otherwise we don't use that sign. blue_sign = blue_sign_on if blue_enabled else blue_sign_off if disable_other else None oran_sign = oran_sign_on if oran_enabled else oran_sign_off if disable_other else None if blue_sign: vmf.create_ent( classname='func_instance', file=blue_sign, targetname=inst['targetname'], angles=sign_angle, origin=blue_loc.join(' '), ) if oran_sign: vmf.create_ent( classname='func_instance', file=oran_sign, targetname=inst['targetname'], angles=sign_angle, origin=oran_loc.join(' '), ) # Now modify the fizzler... # Subtract the sign from the list of connections, but don't go below # zero fizzler.base_inst.fixup['$connectioncount'] = str(max( 0, srctools.conv_int(fizzler.base_inst.fixup['$connectioncount', '']) - 1 )) # Find the direction the fizzler normal is. # Signs will associate with the given side! bbox_min, bbox_max = fizzler.emitters[0] fizz_norm_axis = fizzler.normal().axis() sign_center = (bbox_min[fizz_norm_axis] + bbox_max[fizz_norm_axis]) / 2 # Figure out what the sides will set values to... pos_blue = False pos_oran = False neg_blue = False neg_oran = False if sign_loc[fizz_norm_axis] < sign_center: pos_blue = blue_enabled pos_oran = oran_enabled else: neg_blue = blue_enabled neg_oran = oran_enabled # If it activates the paint gun, use different textures fizzler.tag_on_pos = pos_blue or pos_oran fizzler.tag_on_neg = neg_blue or neg_oran # Now make the trigger ents. We special-case these since they need to swap # depending on the sign config and position. if vbsp.GAME_MODE == 'COOP': # We need ATLAS-specific triggers pos_trig = vmf.create_ent( classname='trigger_playerteam', ) neg_trig = vmf.create_ent( classname='trigger_playerteam', ) output = 'OnStartTouchBluePlayer' else: pos_trig = vmf.create_ent( classname='trigger_multiple', ) neg_trig = vmf.create_ent( classname='trigger_multiple', spawnflags='1', ) output = 'OnStartTouch' pos_trig['origin'] = neg_trig['origin'] = fizzler.base_inst['origin'] pos_trig['spawnflags'] = neg_trig['spawnflags'] = '1' # Clients Only pos_trig['targetname'] = local_name(fizzler.base_inst, 'trig_pos') neg_trig['targetname'] = local_name(fizzler.base_inst, 'trig_neg') pos_trig['startdisabled'] = neg_trig['startdisabled'] = ( not fizzler.base_inst.fixup.bool('start_enabled') ) pos_trig.outputs = [ Output(output, neg_trig, 'Enable'), Output(output, pos_trig, 'Disable'), ] neg_trig.outputs = [ Output(output, pos_trig, 'Enable'), Output(output, neg_trig, 'Disable'), ] voice_attr = vbsp.settings['has_attr'] if blue_enabled or disable_other: # If this is blue/oran only, don't affect the other color neg_trig.outputs.append(Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_blue), )) pos_trig.outputs.append(Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_blue), )) if blue_enabled: # Add voice attributes - we have the gun and gel! voice_attr['bluegelgun'] = True voice_attr['bluegel'] = True voice_attr['bouncegun'] = True voice_attr['bouncegel'] = True if oran_enabled or disable_other: neg_trig.outputs.append(Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_oran), )) pos_trig.outputs.append(Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_oran), )) if oran_enabled: voice_attr['orangegelgun'] = True voice_attr['orangegel'] = True voice_attr['speedgelgun'] = True voice_attr['speedgel'] = True if not oran_enabled and not blue_enabled: # If both are disabled, we must shutdown the gun when touching # either side - use neg_trig for that purpose! # We want to get rid of pos_trig to save ents vmf.remove_ent(pos_trig) neg_trig['targetname'] = local_name(fizzler.base_inst, 'trig_off') neg_trig.outputs.clear() neg_trig.add_out(Output( output, '@BlueIsEnabled', 'SetValue', param='0' )) neg_trig.add_out(Output( output, '@OrangeIsEnabled', 'SetValue', param='0' )) # Make the triggers. for bbox_min, bbox_max in fizzler.emitters: bbox_min = bbox_min.copy() - 64 * fizzler.up_axis bbox_max = bbox_max.copy() + 64 * fizzler.up_axis # The triggers are 8 units thick, with a 32-unit gap in the middle neg_min, neg_max = Vec(bbox_min), Vec(bbox_max) neg_min[fizz_norm_axis] -= 24 neg_max[fizz_norm_axis] -= 16 pos_min, pos_max = Vec(bbox_min), Vec(bbox_max) pos_min[fizz_norm_axis] += 16 pos_max[fizz_norm_axis] += 24 if blue_enabled or oran_enabled: neg_trig.solids.append( vmf.make_prism( neg_min, neg_max, mat='tools/toolstrigger', ).solid, ) pos_trig.solids.append( vmf.make_prism( pos_min, pos_max, mat='tools/toolstrigger', ).solid, ) else: # If neither enabled, use one trigger neg_trig.solids.append( vmf.make_prism( neg_min, pos_max, mat='tools/toolstrigger', ).solid, )
def res_make_tag_fizzler(vmf: VMF, inst: Entity, res: Property): """Add an Aperture Tag Paint Gun activation fizzler. These fizzlers are created via signs, and work very specially. MUST be priority -100 so it runs before fizzlers! """ import vbsp if vbsp_options.get(str, 'game_id') != utils.STEAM_IDS['TAG']: # Abort - TAG fizzlers shouldn't appear in any other game! inst.remove() return fizzler = None # Look for the fizzler instance we want to replace for targetname in inst.output_targets(): try: fizzler = FIZZLERS[targetname] except KeyError: # Not a fizzler. # It's an indicator toggle, remove it and the antline to clean up. for ent in vmf.by_target[targetname]: remove_ant_toggle(ent) inst.outputs.clear() # Remove the outputs now, they're not valid anyway. if fizzler is None: # No fizzler - remove this sign inst.remove() return if fizzler.fizz_type.id == 'TAG_FIZZ_ID': LOGGER.warning('Two tag signs attached to one fizzler...') inst.remove() return # Swap to the special Tag Fizzler type. fizzler.fizz_type = FIZZ_TYPES[TAG_FIZZ_ID] # The distance from origin the double signs are seperated by. sign_offset = res.int('signoffset', 16) sign_loc = ( # The actual location of the sign - on the wall Vec.from_str(inst['origin']) + Vec(0, 0, -64).rotate_by_str(inst['angles']) ) # Now deal with the visual aspect: # Blue signs should be on top. blue_enabled = inst.fixup.bool('$start_enabled') oran_enabled = inst.fixup.bool('$start_reversed') # If True, single-color signs will also turn off the other color. # This also means we always show both signs. # If both are enabled or disabled, this has no effect. disable_other = ( not inst.fixup.bool('$disable_autorespawn', True) and blue_enabled != oran_enabled ) # Delete fixups now, they aren't useful. inst.fixup.clear() if not blue_enabled and not oran_enabled: # Hide the sign in this case! inst.remove() inst_angle = srctools.parse_vec_str(inst['angles']) inst_normal = Vec(0, 0, 1).rotate(*inst_angle) loc = Vec.from_str(inst['origin']) if disable_other or (blue_enabled and oran_enabled): inst['file'] = res['frame_double'] # On a wall, and pointing vertically if inst_normal.z == 0 and Vec(y=1).rotate(*inst_angle).z: # They're vertical, make sure blue's on top! blue_loc = Vec(loc.x, loc.y, loc.z + sign_offset) oran_loc = Vec(loc.x, loc.y, loc.z - sign_offset) # If orange is enabled, with two frames put that on top # instead since it's more important if disable_other and oran_enabled: blue_loc, oran_loc = oran_loc, blue_loc else: offset = Vec(0, sign_offset, 0).rotate(*inst_angle) blue_loc = loc + offset oran_loc = loc - offset else: inst['file'] = res['frame_single'] # They're always centered blue_loc = loc oran_loc = loc if inst_normal.z != 0: # If on floors/ceilings, rotate to point at the fizzler! sign_floor_loc = sign_loc.copy() sign_floor_loc.z = 0 # We don't care about z-positions. # Grab the data saved earlier in res_find_potential_tag_fizzlers() axis, side_min, side_max, normal = calc_fizzler_orient(fizzler) # The Z-axis fizzler (horizontal) must be treated differently. if axis == 'z': # For z-axis, just compare to the center point. # The values are really x, y, z, not what they're named. sign_dir = sign_floor_loc - (side_min, side_max, normal) else: # For the other two, we compare to the line, # or compare to the closest side (in line with the fizz) other_axis = 'x' if axis == 'y' else 'y' if abs(sign_floor_loc[other_axis] - normal) < 32: # Compare to the closest side. Use ** to swap x/y arguments # appropriately. The closest side is the one with the # smallest magnitude. sign_dir = min( sign_floor_loc - Vec.with_axes( axis,side_min, other_axis, normal, ), sign_floor_loc - Vec.with_axes( axis, side_max, other_axis, normal, ), key=Vec.mag, ) else: # Align just based on whether we're in front or behind. sign_dir = Vec() sign_dir[other_axis] = sign_floor_loc[other_axis] - normal sign_angle = math.degrees( math.atan2(sign_dir.y, sign_dir.x) ) # Round to nearest 90 degrees # Add 45 so the switchover point is at the diagonals sign_angle = (sign_angle + 45) // 90 * 90 # Rotate to fit the instances - south is down sign_angle = int(sign_angle + 90) % 360 if inst_normal.z > 0: sign_angle = '0 {} 0'.format(sign_angle) elif inst_normal.z < 0: # Flip upside-down for ceilings sign_angle = '0 {} 180'.format(sign_angle) else: # On a wall, face upright sign_angle = PETI_INST_ANGLE[inst_normal.as_tuple()] # If disable_other, we show off signs. Otherwise we don't use that sign. blue_sign = 'blue_sign' if blue_enabled else 'blue_off_sign' if disable_other else None oran_sign = 'oran_sign' if oran_enabled else 'oran_off_sign' if disable_other else None if blue_sign: vmf.create_ent( classname='func_instance', file=res[blue_sign, ''], targetname=inst['targetname'], angles=sign_angle, origin=blue_loc.join(' '), ) if oran_sign: vmf.create_ent( classname='func_instance', file=res[oran_sign, ''], targetname=inst['targetname'], angles=sign_angle, origin=oran_loc.join(' '), ) # Now modify the fizzler... # Subtract the sign from the list of connections, but don't go below # zero fizzler.base_inst.fixup['$connectioncount'] = str(max( 0, srctools.conv_int(fizzler.base_inst.fixup['$connectioncount', ''], 0) - 1 )) # Find the direction the fizzler normal is. # Signs will associate with the given side! bbox_min, bbox_max = fizzler.emitters[0] fizz_field_axis = (bbox_max-bbox_min).norm() fizz_norm_axis = fizzler.normal().axis() sign_center = (bbox_min[fizz_norm_axis] + bbox_max[fizz_norm_axis]) / 2 # Figure out what the sides will set values to... pos_blue = False pos_oran = False neg_blue = False neg_oran = False if sign_loc[fizz_norm_axis] < sign_center: pos_blue = blue_enabled pos_oran = oran_enabled else: neg_blue = blue_enabled neg_oran = oran_enabled # If it activates the paint gun, use different textures fizzler.tag_on_pos = pos_blue or pos_oran fizzler.tag_on_neg = neg_blue or neg_oran # Now make the trigger ents. We special-case these since they need to swap # depending on the sign config and position. if vbsp.GAME_MODE == 'COOP': # We need ATLAS-specific triggers pos_trig = vmf.create_ent( classname='trigger_playerteam', ) neg_trig = vmf.create_ent( classname='trigger_playerteam', ) output = 'OnStartTouchBluePlayer' else: pos_trig = vmf.create_ent( classname='trigger_multiple', ) neg_trig = vmf.create_ent( classname='trigger_multiple', spawnflags='1', ) output = 'OnStartTouch' pos_trig['origin'] = neg_trig['origin'] = fizzler.base_inst['origin'] pos_trig['spawnflags'] = neg_trig['spawnflags'] = '1' # Clients Only pos_trig['targetname'] = local_name(fizzler.base_inst, 'trig_pos') neg_trig['targetname'] = local_name(fizzler.base_inst, 'trig_neg') pos_trig.outputs = [ Output(output, neg_trig, 'Enable'), Output(output, pos_trig, 'Disable'), ] neg_trig.outputs = [ Output(output, pos_trig, 'Enable'), Output(output, neg_trig, 'Disable'), ] voice_attr = vbsp.settings['has_attr'] if blue_enabled or disable_other: # If this is blue/oran only, don't affect the other color neg_trig.outputs.append(Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_blue), )) pos_trig.outputs.append(Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_blue), )) if blue_enabled: # Add voice attributes - we have the gun and gel! voice_attr['bluegelgun'] = True voice_attr['bluegel'] = True voice_attr['bouncegun'] = True voice_attr['bouncegel'] = True if oran_enabled or disable_other: neg_trig.outputs.append(Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_oran), )) pos_trig.outputs.append(Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_oran), )) if oran_enabled: voice_attr['orangegelgun'] = True voice_attr['orangegel'] = True voice_attr['speedgelgun'] = True voice_attr['speedgel'] = True if not oran_enabled and not blue_enabled: # If both are disabled, we must shutdown the gun when touching # either side - use neg_trig for that purpose! # We want to get rid of pos_trig to save ents vmf.remove_ent(pos_trig) neg_trig['targetname'] = local_name(fizzler.base_inst, 'trig_off') neg_trig.outputs.clear() neg_trig.add_out(Output( output, '@BlueIsEnabled', 'SetValue', param='0' )) neg_trig.add_out(Output( output, '@OrangeIsEnabled', 'SetValue', param='0' )) # Make the triggers. for bbox_min, bbox_max in fizzler.emitters: bbox_min = bbox_min.copy() - 64 * fizzler.up_axis bbox_max = bbox_max.copy() + 64 * fizzler.up_axis # The triggers are 8 units thick, with a 32-unit gap in the middle neg_min, neg_max = Vec(bbox_min), Vec(bbox_max) neg_min[fizz_norm_axis] -= 24 neg_max[fizz_norm_axis] -= 16 pos_min, pos_max = Vec(bbox_min), Vec(bbox_max) pos_min[fizz_norm_axis] += 16 pos_max[fizz_norm_axis] += 24 if blue_enabled or oran_enabled: neg_trig.solids.append( vmf.make_prism( neg_min, neg_max, mat='tools/toolstrigger', ).solid, ) pos_trig.solids.append( vmf.make_prism( pos_min, pos_max, mat='tools/toolstrigger', ).solid, ) else: # If neither enabled, use one trigger neg_trig.solids.append( vmf.make_prism( neg_min, pos_max, mat='tools/toolstrigger', ).solid, )
def res_make_tag_fizzler(vmf: VMF, inst: Entity, res: Property): """Add an Aperture Tag Paint Gun activation fizzler. These fizzlers are created via signs, and work very specially. MUST be priority -100 so it runs before fizzlers! """ import vbsp if vbsp_options.get(str, 'game_id') != utils.STEAM_IDS['TAG']: # Abort - TAG fizzlers shouldn't appear in any other game! inst.remove() return fizz_base = fizz_name = None # Look for the fizzler instance we want to replace for targetname in inst.output_targets(): if targetname in tag_fizzlers: fizz_name = targetname fizz_base = tag_fizzlers[targetname] del tag_fizzlers[targetname] # Don't let other signs mod this one! continue else: # It's an indicator toggle, remove it and the antline to clean up. LOGGER.warning('Toggle: {}', targetname) for ent in vmf.by_target[targetname]: remove_ant_toggle(ent) inst.outputs.clear() # Remove the outptuts now, they're not valid anyway. if fizz_base is None: # No fizzler - remove this sign inst.remove() return # The distance from origin the double signs are seperated by. sign_offset = res.int('signoffset', 16) sign_loc = ( # The actual location of the sign - on the wall Vec.from_str(inst['origin']) + Vec(0, 0, -64).rotate_by_str(inst['angles'])) # Now deal with the visual aspect: # Blue signs should be on top. blue_enabled = inst.fixup.bool('$start_enabled') oran_enabled = inst.fixup.bool('$start_reversed') # If True, single-color signs will also turn off the other color. # This also means we always show both signs. # If both are enabled or disabled, this has no effect. disable_other = (not inst.fixup.bool('$disable_autorespawn', True) and blue_enabled != oran_enabled) # Delete fixups now, they aren't useful. inst.fixup.clear() if not blue_enabled and not oran_enabled: # Hide the sign in this case! inst.remove() inst_angle = srctools.parse_vec_str(inst['angles']) inst_normal = Vec(0, 0, 1).rotate(*inst_angle) loc = Vec.from_str(inst['origin']) if disable_other or (blue_enabled and oran_enabled): inst['file'] = res['frame_double'] # On a wall, and pointing vertically if inst_normal.z == 0 and Vec(y=1).rotate(*inst_angle).z: # They're vertical, make sure blue's on top! blue_loc = Vec(loc.x, loc.y, loc.z + sign_offset) oran_loc = Vec(loc.x, loc.y, loc.z - sign_offset) # If orange is enabled, with two frames put that on top # instead since it's more important if disable_other and oran_enabled: blue_loc, oran_loc = oran_loc, blue_loc else: offset = Vec(0, sign_offset, 0).rotate(*inst_angle) blue_loc = loc + offset oran_loc = loc - offset else: inst['file'] = res['frame_single'] # They're always centered blue_loc = loc oran_loc = loc if inst_normal.z != 0: # If on floors/ceilings, rotate to point at the fizzler! sign_floor_loc = sign_loc.copy() sign_floor_loc.z = 0 # We don't care about z-positions. # Grab the data saved earlier in res_find_potential_tag_fizzlers() axis, side_min, side_max, normal = tag_fizzler_locs[fizz_name] # The Z-axis fizzler (horizontal) must be treated differently. if axis == 'z': # For z-axis, just compare to the center point. # The values are really x, y, z, not what they're named. sign_dir = sign_floor_loc - (side_min, side_max, normal) else: # For the other two, we compare to the line, # or compare to the closest side (in line with the fizz) other_axis = 'x' if axis == 'y' else 'y' if abs(sign_floor_loc[other_axis] - normal) < 32: # Compare to the closest side. Use ** to swap x/y arguments # appropriately. The closest side is the one with the # smallest magnitude. vmf.create_ent( classname='info_null', targetname=inst['targetname'] + '_min', origin=sign_floor_loc - Vec(**{ axis: side_min, other_axis: normal, }), ) vmf.create_ent( classname='info_null', targetname=inst['targetname'] + '_max', origin=sign_floor_loc - Vec(**{ axis: side_max, other_axis: normal, }), ) sign_dir = min( sign_floor_loc - Vec(**{ axis: side_min, other_axis: normal, }), sign_floor_loc - Vec(**{ axis: side_max, other_axis: normal, }), key=Vec.mag, ) else: # Align just based on whether we're in front or behind. sign_dir = Vec() sign_dir[other_axis] = sign_floor_loc[other_axis] - normal sign_angle = math.degrees(math.atan2(sign_dir.y, sign_dir.x)) # Round to nearest 90 degrees # Add 45 so the switchover point is at the diagonals sign_angle = (sign_angle + 45) // 90 * 90 # Rotate to fit the instances - south is down sign_angle = int(sign_angle + 90) % 360 if inst_normal.z > 0: sign_angle = '0 {} 0'.format(sign_angle) elif inst_normal.z < 0: # Flip upside-down for ceilings sign_angle = '0 {} 180'.format(sign_angle) else: # On a wall, face upright sign_angle = PETI_INST_ANGLE[inst_normal.as_tuple()] # If disable_other, we show off signs. Otherwise we don't use that sign. blue_sign = 'blue_sign' if blue_enabled else 'blue_off_sign' if disable_other else None oran_sign = 'oran_sign' if oran_enabled else 'oran_off_sign' if disable_other else None if blue_sign: vmf.create_ent( classname='func_instance', file=res[blue_sign, ''], targetname=inst['targetname'], angles=sign_angle, origin=blue_loc.join(' '), ) if oran_sign: vmf.create_ent( classname='func_instance', file=res[oran_sign, ''], targetname=inst['targetname'], angles=sign_angle, origin=oran_loc.join(' '), ) # Now modify the fizzler... fizz_brushes = list(vmf.by_class['trigger_portal_cleanser'] & vmf.by_target[fizz_name + '_brush']) if 'base_inst' in res: fizz_base['file'] = instanceLocs.resolve_one(res['base_inst'], error=True) fizz_base.outputs.clear() # Remove outputs, otherwise they break # branch_toggle entities # Subtract the sign from the list of connections, but don't go below # zero fizz_base.fixup['$connectioncount'] = str( max(0, srctools.conv_int(fizz_base.fixup['$connectioncount', ''], 0) - 1)) if 'model_inst' in res: model_inst = instanceLocs.resolve_one(res['model_inst'], error=True) for mdl_inst in vmf.by_class['func_instance']: if mdl_inst['targetname', ''].startswith(fizz_name + '_model'): mdl_inst['file'] = model_inst # Find the direction the fizzler front/back points - z=floor fizz # Signs will associate with the given side! bbox_min, bbox_max = fizz_brushes[0].get_bbox() for axis, val in zip('xyz', bbox_max - bbox_min): if val == 2: fizz_axis = axis sign_center = (bbox_min[axis] + bbox_max[axis]) / 2 break else: # A fizzler that's not 128*x*2? raise Exception('Invalid fizzler brush ({})!'.format(fizz_name)) # Figure out what the sides will set values to... pos_blue = False pos_oran = False neg_blue = False neg_oran = False if sign_loc[fizz_axis] < sign_center: pos_blue = blue_enabled pos_oran = oran_enabled else: neg_blue = blue_enabled neg_oran = oran_enabled fizz_off_tex = { 'left': res['off_left'], 'center': res['off_center'], 'right': res['off_right'], 'short': res['off_short'], } fizz_on_tex = { 'left': res['on_left'], 'center': res['on_center'], 'right': res['on_right'], 'short': res['on_short'], } # If it activates the paint gun, use different textures if pos_blue or pos_oran: pos_tex = fizz_on_tex else: pos_tex = fizz_off_tex if neg_blue or neg_oran: neg_tex = fizz_on_tex else: neg_tex = fizz_off_tex if vbsp.GAME_MODE == 'COOP': # We need ATLAS-specific triggers pos_trig = vmf.create_ent(classname='trigger_playerteam', ) neg_trig = vmf.create_ent(classname='trigger_playerteam', ) output = 'OnStartTouchBluePlayer' else: pos_trig = vmf.create_ent(classname='trigger_multiple', ) neg_trig = vmf.create_ent( classname='trigger_multiple', spawnflags='1', ) output = 'OnStartTouch' pos_trig['origin'] = neg_trig['origin'] = fizz_base['origin'] pos_trig['spawnflags'] = neg_trig['spawnflags'] = '1' # Clients Only pos_trig['targetname'] = fizz_name + '-trig_pos' neg_trig['targetname'] = fizz_name + '-trig_neg' pos_trig.outputs = [ Output( output, fizz_name + '-trig_neg', 'Enable', ), Output( output, fizz_name + '-trig_pos', 'Disable', ), ] neg_trig.outputs = [ Output( output, fizz_name + '-trig_pos', 'Enable', ), Output( output, fizz_name + '-trig_neg', 'Disable', ), ] voice_attr = vbsp.settings['has_attr'] if blue_enabled or disable_other: # If this is blue/oran only, don't affect the other color neg_trig.outputs.append( Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_blue), )) pos_trig.outputs.append( Output( output, '@BlueIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_blue), )) if blue_enabled: # Add voice attributes - we have the gun and gel! voice_attr['bluegelgun'] = True voice_attr['bluegel'] = True voice_attr['bouncegun'] = True voice_attr['bouncegel'] = True if oran_enabled or disable_other: neg_trig.outputs.append( Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(neg_oran), )) pos_trig.outputs.append( Output( output, '@OrangeIsEnabled', 'SetValue', param=srctools.bool_as_int(pos_oran), )) if oran_enabled: voice_attr['orangegelgun'] = True voice_attr['orangegel'] = True voice_attr['speedgelgun'] = True voice_attr['speedgel'] = True if not oran_enabled and not blue_enabled: # If both are disabled, we must shutdown the gun when touching # either side - use neg_trig for that purpose! # We want to get rid of pos_trig to save ents vmf.remove_ent(pos_trig) neg_trig['targetname'] = fizz_name + '-trig_off' neg_trig.outputs.clear() neg_trig.add_out( Output(output, '@BlueIsEnabled', 'SetValue', param='0')) neg_trig.add_out( Output(output, '@OrangeIsEnabled', 'SetValue', param='0')) for fizz_brush in fizz_brushes: # portal_cleanser ent, not solid! # Modify fizzler textures bbox_min, bbox_max = fizz_brush.get_bbox() for side in fizz_brush.sides(): norm = side.normal() if norm[fizz_axis] == 0: # Not the front/back: force nodraw # Otherwise the top/bottom will have the odd stripes # which won't match the sides side.mat = 'tools/toolsnodraw' continue if norm[fizz_axis] == 1: side.mat = pos_tex[vbsp.TEX_FIZZLER[side.mat.casefold()]] else: side.mat = neg_tex[vbsp.TEX_FIZZLER[side.mat.casefold()]] # The fizzler shouldn't kill cubes fizz_brush['spawnflags'] = '1' fizz_brush.outputs.append( Output( 'OnStartTouch', '@shake_global', 'StartShake', )) fizz_brush.outputs.append( Output( 'OnStartTouch', '@shake_global_sound', 'PlaySound', )) # The triggers are 8 units thick, 24 from the center # (-1 because fizzlers are 2 thick on each side). neg_min, neg_max = Vec(bbox_min), Vec(bbox_max) neg_min[fizz_axis] -= 23 neg_max[fizz_axis] -= 17 pos_min, pos_max = Vec(bbox_min), Vec(bbox_max) pos_min[fizz_axis] += 17 pos_max[fizz_axis] += 23 if blue_enabled or oran_enabled: neg_trig.solids.append( vmf.make_prism( neg_min, neg_max, mat='tools/toolstrigger', ).solid, ) pos_trig.solids.append( vmf.make_prism( pos_min, pos_max, mat='tools/toolstrigger', ).solid, ) else: # If neither enabled, use one trigger neg_trig.solids.append( vmf.make_prism( neg_min, pos_max, mat='tools/toolstrigger', ).solid, )