def coupon_cancel_item(self, item_id):
self._check()
self._check_coupon_is_opened()
if not item_id in self._items:
raise CancelItemError(_("There is no item with this ID (%d)")
% item_id)
elif self.is_coupon_totalized:
raise CancelItemError(_("The coupon is already totalized, "
"you can't cancel items anymore."))
self._items.pop(item_id)
self.write('cancel_item %r\n' % (item_id, ))
def handle_error(self, error_value, raw):
error = int(error_value[2:])
# Page 61-62
if error == 39:
raise DriverError('Bad parameters: %r' % raw, error)
elif error == 10:
raise CouponOpenError(_("Document is already open"), error)
elif error == 11:
raise CouponNotOpenError(_("Coupon is not open"), error)
elif error == 12:
raise CouponNotOpenError(_("There's no open document to cancel"),
error)
elif error == 15:
raise CancelItemError(_("There is no such item in "
"the coupon"), error)
elif error == 16:
raise DriverError("Bad discount/markup parameter", error)
elif error == 21:
log.warning(_('Printer error %s: No paper'), error)
elif error == 22:
raise DriverError(
"Reduce Z was already sent today, try again tomorrow", error)
elif error == 23:
raise PendingReduceZ
elif error == 24:
raise DriverError("Bad unit specified: %r" % raw, error)
elif error == 42:
raise DriverError("Read X has not been sent yet", error)
elif error == 45:
raise DriverError(_("Required field is blank"), error)
else:
raise DriverError("Unhandled error: %d" % error, error)
def coupon_cancel_item(self, item_id):
try:
item = self.items_dict[item_id]
except KeyError:
raise CancelItemError(_("You have specified an invalid item id "
"to cancel!"))
self._send_command(self.CMD_CANCEL_ITEM, item.get_packaged())
def coupon_cancel_item(self, item_id=None):
""" Cancel an item added to coupon; if no item id is specified,
cancel the last item added. """
last_item = self._get_last_item_id()
if item_id is None:
item_id = last_item
elif item_id not in range(1, last_item + 2):
raise CancelItemError("There is no such item with ID %r" % item_id)
self._send_command(CMD_CANCEL_ITEM, "%04d" % (item_id, ))
class MP25Status(object):
PENDING_REDUCE_Z = 66
st1_codes = {
128: (OutofPaperError(_("Printer is out of paper"))),
# 64: (AlmostOutofPaper(_("Printer almost out of paper"))),
32: (PrinterError(_("Printer clock error"))),
16: (PrinterError(_("Printer in error state"))),
8: (CommandError(_("First data value in CMD is not ESC (1BH)"))),
4: (CommandError(_("Nonexistent command"))),
# 2: (CouponOpenError(_("Printer has a coupon currently open"))),
1: (CommandError(_("Invalid number of parameters")))}
st2_codes = {
128: (CommandError(_("Invalid CMD parameter"))),
64: (HardwareFailure(_("Fiscal memory is full"))),
32: (HardwareFailure(_("Error in CMOS memory"))),
16: (PrinterError(_("Given tax is not programmed on the printer"))),
8: (DriverError(_("No available tax slot"))),
4: (CancelItemError(_("The item wasn't added in the coupon or can't "
"be cancelled"))),
# 2: (PrinterError(_("Owner data (CGC/IE) not programmed on the printer"))),
# FIXME: This shouldn't be commented. But it will break the tests.
# Need to update the tests for all bematech printers
#1: (CommandError(_("Command not executed")))
}
st3_codes = {
# 7: (CouponOpenError(_("Coupon already Open"))),
# 8: (CouponNotOpenError(_("Coupon is closed"))),
13: (PrinterOfflineError(_("Printer is offline"))),
16: (DriverError(_("Surcharge or discount greater than coupon total"
"value"))),
17: (DriverError(_("Coupon with no items"))),
20: (PaymentAdditionError(_("Payment method not recognized"))),
22: (PaymentAdditionError(_("Isn't possible add more payments since"
"the coupon total value already was "
"reached"))),
23: (DriverError(_("Coupon isn't totalized yet"))),
43: (CouponNotOpenError(_("Printer not initialized"))),
45: (PrinterError(_("Printer without serial number"))),
52: (DriverError(_("Invalid start date"))),
53: (DriverError(_("Invalid final date"))),
85: (DriverError(_("Sale with null value"))),
91: (ItemAdditionError(_("Surcharge or discount greater than item"
"value"))),
100: (DriverError(_("Invalid date"))),
115: (CancelItemError(_("Item doesn't exists or already was cancelled"))),
118: (DriverError(_("Surcharge greater than item value"))),
119: (DriverError(_("Discount greater than item value"))),
129: (CouponOpenError(_("Invalid month"))),
169: (CouponTotalizeError(_("Coupon already totalized"))),
170: (PaymentAdditionError(_("Coupon not totalized yet"))),
171: (DriverError(_("Surcharge on subtotal already effected"))),
172: (DriverError(_("Discount on subtotal already effected"))),
176: (DriverError(_("Invalid date")))}
def __init__(self, reply):
self.st1, self.st2, self.st3 = reply[-3:]
@property
def open(self):
return self.st1 & 2
def _check_error_in_dict(self, error_codes, value):
for key in error_codes:
if key & value:
raise error_codes[key]
def check_error(self):
log.debug("status: st1=%s st2=%s st3=%s" %
(self.st1, self.st2, self.st3))
if self.st1 != 0:
self._check_error_in_dict(self.st1_codes, self.st1)
if self.st2 != 0:
self._check_error_in_dict(self.st2_codes, self.st2)
# first bit means not executed, look in st3 for more
if self.st2 & 1 and self.st3:
if self.st3 in self.st3_codes:
raise self.st3_codes[self.st3]
class Reply(object):
#
# Printer flags
#
error_codes = {
'0101': (CommandError(_("Invalid command for current state."))),
'0102': (CommandError(_("Invalid command for current document."))),
'0203': (CommandError(_("Excess fields"))),
'0204': (CommandError(_("Missing fields"))),
'0205': (CommandParametersError(_("Field not optional."))),
'0206': (CommandParametersError(_("Invalid alphanumeric field."))),
'0207': (CommandParametersError(_("Invalid alphabetic field."))),
'0208': (CommandParametersError(_("Invalid numeric field."))),
'020E':
(CommandParametersError(_("Fields with print invalid "
"attributes."))),
'0304': (OutofPaperError(_("Out of paper."))),
'0305': (AlmostOutofPaper(_("Almost out of paper."))),
'0801':
(CommandError(_("Invalid command with closed "
"fiscal journey."))),
'090C': (DriverError(_("Payment method not defined."))),
'090F': (ItemAdditionError(_("Tax not found."))),
'0910': (ItemAdditionError(_("Invalid tax."))),
'0A12': (CancelItemError(
_("It was not possible cancel the last "
"fiscal coupon."))),
'0A15': (PrinterError(_("Requires CDC cancellation."))),
'0A16': (CancelItemError(_("Invalid item number in fiscal coupon"))),
'0E0A': (PrinterError(_("Last non-fiscal coupon not found."))),
'0E0B': (PrinterError(_("Payment method not found."))),
}
def __init__(self, string, command_id):
checksum = string[-4:]
self.string = string[:-4]
log.debug('reply %s' % repr(string))
cs = '%04X' % sum([ord(i) for i in self.string])
if cs != checksum:
raise DriverError('Erro de checksum')
self.string = unescape(self.string)
# Verifica header & tail
assert self.pop() == STX, 'STX'
frame_id = self.pop()
if frame_id == '\x80':
self.intermediate = True
return
self.intermediate = False
assert frame_id == chr(command_id), ('command_id', command_id)
assert self.string[-1] == ETX, 'ETX'
# Retira statuses
self.printer_status = struct.unpack('>H', str2bytes(self.pop(2)))[0]
assert self.pop() == FLD, 'FLD 1'
self.fiscal_status = struct.unpack('>H', str2bytes(self.pop(2)))[0]
assert self.pop() == FLD, 'FLD 2'
# reserved
self.pop()
r = self.pop(2)
self.reply_status = '%02X%02X' % (ord(r[0]), ord(r[1]))
assert self.pop() == FLD, 'FLD 3'
# reserved
self.pop()
# Pega dados de retorno
fields = self.string[:-1]
# FIXME: Maybe we need to de-escape the string
self.fields = fields.split(FLD)
def check_error(self):
log.debug("reply_status %s" % self.reply_status)
error_code = self.reply_status
# Success, do nothing
if error_code == '0000':
return
if error_code in self.error_codes:
error = self.error_codes[error_code]
error.code = int(error_code, 16)
raise error
raise DriverError(error="unhandled driver error",
code=int(error_code, 16))
def pop(self, size=1):
"""Remove size bites from the begining of self.string and returns it
"""
head = self.string[:size]
self.string = self.string[size:]
return head
def check_printer_status(self):
status = bin(self.printer_status)
printer_status = status[2:]
return printer_status
def check_fiscal_status(self):
status = bin(self.fiscal_status)
fiscal_status = status[2:]
return fiscal_status
