Пример #1
0
def one_time_setup(ip_addr, major_source):
    """ One time setup of state

    ip_addr - of the tegra we want to install app at
    major_source - we've hacked this script to install
            may-also-be-needed tools, but the source we're asked to
            install has the meta data we need

    Side Effects:
        We two globals, needed for error reporting:
            errorFile, proxyFile
    """

    # set up the flag files, used throughout
    cwd = os.getcwd()
    global proxyFile, errorFile
    proxyFile = os.path.join(cwd, "..", "proxy.flg")
    errorFile = os.path.join(cwd, "..", "error.flg")

    proxyIP = getOurIP()
    proxyPort = calculatePort()

    workdir = os.path.dirname(major_source)
    inifile = os.path.join(workdir, "fennec", "application.ini")
    remoteappini = os.path.join(workdir, "talos", "remoteapp.ini")
    print "copying %s to %s" % (inifile, remoteappini)
    runCommand(["cp", inifile, remoteappini])

    print "connecting to: %s" % ip_addr
    dm = devicemanager.DeviceManagerSUT(ip_addr)
    # Moar data!
    dm.debug = 3

    devRoot = checkDeviceRoot(dm)

    if devRoot is None or devRoot == "/tests":
        setFlag(errorFile, "Remote Device Error: devRoot from devicemanager [%s] is not correct - exiting" % devRoot)
        sys.exit(1)

    try:
        setFlag(proxyFile)
        print proxyIP, proxyPort
        getDeviceTimestamp(dm)
        setDeviceTimestamp(dm)
        getDeviceTimestamp(dm)
        dm.getInfo("process")
        dm.getInfo("memory")
        dm.getInfo("uptime")

        width, height = getResolution(dm)
        # adjust resolution down to allow fennec to install without memory issues
        if width >= 1050 or height >= 1050:
            dm.adjustResolution(1024, 768, "crt")
            print "calling reboot"
            dm.reboot(proxyIP, proxyPort)
            waitForDevice(dm)

            width, height = getResolution(dm)
            if width != 1024 and height != 768:
                clearFlag(proxyFile)
                setFlag(
                    errorFile,
                    "Remote Device Error: Resolution change failed.  Should be %d/%d but is %d/%d"
                    % (1024, 768, width, height),
                )
                sys.exit(1)

    finally:
        clearFlag(proxyFile)

    return dm, devRoot
Пример #2
0
def one_time_setup(ip_addr, major_source):
    ''' One time setup of state

    ip_addr - of the device we want to install app at
    major_source - we've hacked this script to install
            may-also-be-needed tools, but the source we're asked to
            install has the meta data we need

    Side Effects:
        global, needed for error reporting:
            errorFile
    '''

    # set up the flag files, used throughout
    cwd = os.getcwd()
    global errorFile
    errorFile = os.path.join(cwd, '..', 'error.flg')
    deviceName = os.path.basename(cwd)

    proxyIP = getOurIP()
    proxyPort = calculatePort()

    workdir = os.path.dirname(major_source)
    inifile = os.path.join(workdir, 'fennec', 'application.ini')
    remoteappini = os.path.join(workdir, 'talos', 'remoteapp.ini')
    log.info('copying %s to %s' % (inifile, remoteappini))
    runCommand(['cp', inifile, remoteappini])

    log.info("connecting to: %s" % ip_addr)
    dm = devicemanager.DeviceManagerSUT(ip_addr)
    # Moar data!
    dm.debug = 3

    devRoot = checkDeviceRoot(dm)

    if devRoot is None or devRoot == '/tests':
        setFlag(
            errorFile,
            "Remote Device Error: devRoot from devicemanager [%s] is not correct - exiting"
            % devRoot)
        return None, None

    try:
        log.info("%s, %s" % (proxyIP, proxyPort))
        getDeviceTimestamp(dm)
        setDeviceTimestamp(dm)
        getDeviceTimestamp(dm)
        dm.getInfo('process')
        dm.getInfo('memory')
        dm.getInfo('uptime')

        width, height = getResolution(dm)
        # adjust resolution down to allow fennec to install without memory
        # issues
        if (width == 1600 or height == 1200):
            dm.adjustResolution(1024, 768, 'crt')
            log.info('forcing device reboot')
            if not powermanagement.soft_reboot_and_verify(
                    device=deviceName, dm=dm, ipAddr=proxyIP, port=proxyPort):
                return None, None

            width, height = getResolution(dm)
            if width != 1024 and height != 768:
                setFlag(
                    errorFile,
                    "Remote Device Error: Resolution change failed.  Should be %d/%d but is %d/%d"
                    % (1024, 768, width, height))
                return None, None

    except devicemanager.AgentError, err:
        log.error(
            "remoteDeviceError: while doing one time setup for installation: %s"
            % err)
        return None, None
Пример #3
0
def one_time_setup(ip_addr, major_source):
    ''' One time setup of state

    ip_addr - of the tegra we want to install app at
    major_source - we've hacked this script to install
            may-also-be-needed tools, but the source we're asked to
            install has the meta data we need

    Side Effects:
        We two globals, needed for error reporting:
            errorFile, proxyFile
    '''

    # set up the flag files, used throughout
    cwd = os.getcwd()
    global proxyFile, errorFile
    proxyFile = os.path.join(cwd, '..', 'proxy.flg')
    errorFile = os.path.join(cwd, '..', 'error.flg')

    proxyIP = getOurIP()
    proxyPort = calculatePort()

    workdir = os.path.dirname(major_source)
    inifile = os.path.join(workdir, 'fennec', 'application.ini')
    remoteappini = os.path.join(workdir, 'talos', 'remoteapp.ini')
    print 'copying %s to %s' % (inifile, remoteappini)
    runCommand(['cp', inifile, remoteappini])

    print "connecting to: %s" % ip_addr
    dm = devicemanager.DeviceManagerSUT(ip_addr)
    # Moar data!
    dm.debug = 3

    devRoot = checkDeviceRoot(dm)

    if devRoot is None or devRoot == '/tests':
        setFlag(
            errorFile,
            "Remote Device Error: devRoot from devicemanager [%s] is not correct - exiting"
            % devRoot)
        sys.exit(1)

    try:
        setFlag(proxyFile)
        print proxyIP, proxyPort
        getDeviceTimestamp(dm)
        setDeviceTimestamp(dm)
        getDeviceTimestamp(dm)
        dm.getInfo('process')
        dm.getInfo('memory')
        dm.getInfo('uptime')

        width, height = getResolution(dm)
        #adjust resolution down to allow fennec to install without memory issues
        if (width >= 1050 or height >= 1050):
            dm.adjustResolution(1024, 768, 'crt')
            print 'calling reboot'
            dm.reboot(proxyIP, proxyPort)
            waitForDevice(dm)

            width, height = getResolution(dm)
            if width != 1024 and height != 768:
                clearFlag(proxyFile)
                setFlag(
                    errorFile,
                    "Remote Device Error: Resolution change failed.  Should be %d/%d but is %d/%d"
                    % (1024, 768, width, height))
                sys.exit(1)

    finally:
        clearFlag(proxyFile)

    return dm, devRoot
Пример #4
0
def one_time_setup(ip_addr, major_source):
    ''' One time setup of state

    ip_addr - of the device we want to install app at
    major_source - we've hacked this script to install
            may-also-be-needed tools, but the source we're asked to
            install has the meta data we need

    Side Effects:
        global, needed for error reporting:
            errorFile
    '''

    # set up the flag files, used throughout
    cwd = os.getcwd()
    global errorFile
    errorFile = os.path.join(cwd, '..', 'error.flg')
    deviceName = os.path.basename(cwd)

    proxyIP = getOurIP()
    proxyPort = calculatePort()

    workdir = os.path.dirname(major_source)
    inifile = os.path.join(workdir, 'fennec', 'application.ini')
    remoteappini = os.path.join(workdir, 'talos', 'remoteapp.ini')
    log.info('copying %s to %s' % (inifile, remoteappini))
    runCommand(['cp', inifile, remoteappini])

    log.info("connecting to: %s" % ip_addr)
    dm = devicemanager.DeviceManagerSUT(ip_addr)
# Moar data!
    dm.debug = 3

    devRoot = checkDeviceRoot(dm)

    if devRoot is None or devRoot == '/tests':
        setFlag(errorFile, "Remote Device Error: devRoot from devicemanager [%s] is not correct - exiting" % devRoot)
        return None, None

    try:
        log.info("%s, %s" % (proxyIP, proxyPort))
        getDeviceTimestamp(dm)
        setDeviceTimestamp(dm)
        getDeviceTimestamp(dm)
        dm.getInfo('process')
        dm.getInfo('memory')
        dm.getInfo('uptime')

        width, height = getResolution(dm)
        # adjust resolution down to allow fennec to install without memory
        # issues
        if (width == 1600 or height == 1200):
            dm.adjustResolution(1024, 768, 'crt')
            log.info('forcing device reboot')
            if not powermanagement.soft_reboot_and_verify(device=deviceName, dm=dm, ipAddr=proxyIP, port=proxyPort):
                return None, None

            width, height = getResolution(dm)
            if width != 1024 and height != 768:
                setFlag(errorFile, "Remote Device Error: Resolution change failed.  Should be %d/%d but is %d/%d" % (1024, 768, width, height))
                return None, None

    except devicemanager.AgentError, err:
        log.error("remoteDeviceError: while doing one time setup for installation: %s" % err)
        return None, None
Пример #5
0
# Moar data!
dm.debug = 3
devRoot  = checkDeviceRoot(dm)

if devRoot is None or devRoot == '/tests':
    setFlag(errorFile, "Remote Device Error: devRoot from devicemanager [%s] is not correct - exiting" % devRoot)
    sys.exit(1)

workdir      = os.path.dirname(source)
filename     = os.path.basename(source)
target       = os.path.join(devRoot, filename)
inifile      = os.path.join(workdir, 'fennec', 'application.ini')
remoteappini = os.path.join(workdir, 'talos', 'remoteapp.ini')

getDeviceTimestamp(dm)
setDeviceTimestamp(dm)
getDeviceTimestamp(dm)

print "Installing %s" % target
if dm.pushFile(source, target):
    try:
        setFlag(proxyFile)
        print proxyIP, proxyPort
        dm.getInfo('process')
        dm.getInfo('memory')
        dm.getInfo('uptime')

        width, height = getResolution(dm)
        #adjust resolution down to allow fennec to install without memory issues
        if (width >= 1050 or height >= 1050):
            dm.adjustResolution(1024, 768, 'crt')