c1v2 = caps(brd.DC((47.4, 9.4)).left(90), 'GBL', 'GL2', 2)
c1v2[0].pads[0].setlayer('GBL').w("r 90 f 2").wire()
caps(brd.DC((43.7, 2.8)).left(90), 'GL2', 'GBL', 2)
caps(brd.DC((37.0, 1.5)), 'GL2', 'GL3', 2)
caps(brd.DC((41.5, 18.6)).right(45), 'GL2', 'GL3', 1)
if 1:
brd.outline()
else:
brd.oversize(2)
brd.fill()
brd.check()
if 0:
im = Image.open("img/dazzler-logo.png").transpose(Image.ROTATE_270)
brd.logo(6.4, 28.8, im)
im = Image.open("img/gd3x-logo.png")
brd.logo(9.1, 36, im, 0.8)
im = Image.open("img/oshw-logo-outline.png")
brd.logo(6.9, 13.6, im, 0.5)
x = j1.center.xy[0] + 0.5
for i,s in enumerate(["(C) 2020", "EXCAMERA LABS", str(__VERSION__)]):
brd.annotate(x, 35.3 - 1.5 * i, s)
brd.save("dazzler")
svgout.write(brd, "dazzler.svg")
tikzout.write(brd, "dazzler.tikz")
lx9.dump_ucf("dazzler")
brd.logo(75.8, 6.2, gentext("PLAYER 1"), scale=0.4)
brd.logo(75.8, 46.9, gentext("PLAYER 2"), scale=0.4)
brd.logo(76,
53.3 / 2 - 12,
gentext("1").transpose(Image.ROTATE_90),
scale=1.0)
brd.logo(76,
53.3 / 2 + 12,
gentext("2").transpose(Image.ROTATE_90),
scale=1.0)
brd.logo(75.8,
53.3 / 2,
Image.open("img/oshw-logo-outline.png").transpose(
Image.ROTATE_90),
scale=0.7)
for i, s in enumerate(["(C) 2020", "EXCAMERA LABS", str(__VERSION__)]):
brd.annotate(57.5, 8.5 - 1.5 * i, s)
if 1:
brd.fill_any("GTL", "VCC")
brd.fill_any("GBL", "GL2")
brd.save("rc2014_dazzler")
for n in brd.nets:
print(n)
svgout.write(brd, "rc2014_dazzler.svg")
def gen(target):
brd = cu.Board(
(90, 63),
trace = cu.mil(6),
space = cu.mil(6) * 2.0,
via_hole = 0.3,
via = 0.6,
via_space = cu.mil(5),
silk = cu.mil(6))
brd.outline()
brd.layers['GML'].union(sg.box(-9.8, 0, 0, 16))
daz = Dazzler(brd.DC((28, 38)).left(90))
if target == "pico":
pico = Pico(brd.DC((70, 28)))
elif target == "teensy":
teensy = Teensy40(brd.DC((70, 28)))
breakout(teensy)
elif target == "feather":
feather = Feather(brd.DC((70, 28)))
breakout(feather)
sd = SD(brd.DC((3, 12)).right(180))
# ------------------------------ SD
for nm in ("G1", "G2", "G3", "G4", "6"):
sd.s(nm).w("r 90 f 1 -")
sd.s("4").setname("VCC").w("r 90 f 2").wire()
tt = [sd.s(c) for c in "1235789"]
[t.left(90).forward(1) for t in tt]
r0 = brd.enriver90(tt, 90).left(135).wire()
tt = [daz.s(str(15 + i)) for i in range(7)]
[t.w("o f .1") for t in tt]
r1 = brd.enriver90(tt, 90).left(45).meet(r0)
# ------------------------------ Wii
def wii(i):
y = 32.5 + 6 - i * 12
return cu.WiiPlug(brd.DC((-5, y)).right(270)).escape()
wii1 = wii(-1)
wii2 = wii(1)
wii1.w("r 90 f 2").wire()
wii2.w("f 10 r 45 f 4 r 45").wire()
wii = wii2.join(wii1, 0.5).wire()
tt = [daz.s(str(i)) for i in (13, 12, 11, 10, 9, 8)]
[t.w("i f 4") for t in tt]
daz_i2cbus = brd.enriver90(tt, -90).wire()
wii.w("f 9 r 90 f 3 /").meet(daz_i2cbus)
# ------------------------------ Dazzler power
daz.s("VCC").thermal(1).wire()
for nm in ("GND", "GND1", "GND2"):
daz.s(nm).inside().forward(2).wire(width = 0.5).w("-")
daz_used = ("1", "2", "22", "23", "25", "26", "27", "28", "29", "PGM")
tt = [daz.s(nm) for nm in daz_used]
[p.w("i f 4").wire() for p in tt]
daz.s("1").left(90)
daz.s("2").forward(1).left(90)
daz.s("PGM").right(90)
cu.extend2(tt)
b1 = brd.enriver90(tt[::-1], 90)
if target == "pico":
b1.w("l 90 f 2 r 45").wire()
pico_used = (
"GP0",
"GP2", "GP3", "GP4", "GP5",
"GP6", "GP7", "GP8", "GP9", "GP10"
)
tt = [pico.s(str(i)) for i in pico_used]
[p.setlayer("GBL").w("r 180 f 2").wire() for p in tt]
b0 = brd.enriver90(tt[::-1], -90).wire()
b0.shuffle(b1, { # Pico Dazzler
"GP8": "1" , # UART1 TX CONSOLE IN
"GP9": "2" , # UART1 RX CONOLE OUT
"GP4": "22" , # SPI0 RX MISO
"GP5": "25" , # GP5 GPU SEL
"GP6": "26" , # GP6 SD SEL
"GP7": "27" , # GP7 DAZZLER SEL
"GP3": "28" , # SPI0 TX MOSI
"GP2": "29" , # SPI0 SCK SCK
"GP10":"PGM", # GP10 PGM
"GP0": "23" , # UART0 TX UART
}).w("f 9 l 45").meet(b1)
daz.s("5V").setwidth(0.5).w("o f 1 l 90 f 7 r 90 f 14 r 90 f 2.5").goto(pico.s("VBUS")).wire()
elif target == "teensy":
b1.w("l 45 f 2 r 45").wire()
teensy_used = (
"1", "8", "9", "10", "11", "12",
"13", "14", "15", "16"
)
tt = [teensy.s(str(i)) for i in teensy_used]
[p.setlayer("GBL").w("l 90 f 2").wire() for p in tt]
rv0 = brd.enriver90(tt[:6][::-1], -90).wire()
rv1 = brd.enriver90(tt[6:][::-1], 90).wire()
b0 = rv1.join(rv0, 1).forward(2).wire()
b0.shuffle(b1, { # Teensy Dazzler
"14": "1" , # TX3 CONSOLE IN
"15": "2" , # RX3 CONOLE OUT
"12": "22" , # MISO MISO
"8" : "25" , # 8 GPU SEL
"9" : "26" , # 9 SD SEL
"10": "27" , # 10 DAZZLER SEL
"11": "28" , # MOSI MOSI
"13": "29" , # SCK SCK
"16":"PGM" , # 16 PGM
"1" : "23" , # UART0 TX UART
}).w("f 8").meet(b1)
daz.s("5V").setwidth(0.5).w("o f 2 r 90 f 39 l 90 f 23").goto(teensy.s("VIN")).wire()
elif target == "feather":
mapping = {
# Feather Dazzler
"SCK" : "29" , # SCK
"MOSI" : "28" , # MOSI
"MISO" : "22" , # MISO
"TX" : "23" , # UART
"D4" : "25" , # GPU SEL
"D5" : "26" , # SD SEL
"D6" : "27" , # DAZZLER SEL
"D9" :"PGM" , # PGM
"D10" : "2" , # CONOLE OUT
"D12" : "1" , # CONSOLE IN
}
b1.w("l 45 f 2 r 45").wire()
used = mapping.keys()
tt = [feather.s(str(i)) for i in used]
[p.setlayer("GBL").w("l 90 f 2").wire() for p in tt]
rv0 = brd.enriver90(tt[:5][::-1], -90).wire()
rv1 = brd.enriver90(tt[5:][::-1], 90).wire()
b0 = rv1.join(rv0, 1).forward(19).wire()
b0.shuffle(b1, mapping).w("f 8").meet(b1)
daz.s("5V").setwidth(0.5).w("o f 2 r 90 f 41 l 90 f 23").goto(feather.s("USB")).wire()
if 1:
im = Image.open("img/gameduino-mono.png")
brd.logo(16, 4, im)
im = Image.open("img/dazzler-logo.png")
brd.logo(36, 4, im)
if target == "pico":
brd.logo(pico.center.xy[0], pico.center.xy[1] - 15, gentext("PICO"))
else:
brd.logo(70, 4, gentext(target))
brd.logo(-5, 38.5 - 12, gentext("2").transpose(Image.ROTATE_270), scale = 0.9)
brd.logo(-5, 38.5 + 12, gentext("1").transpose(Image.ROTATE_270), scale = 0.9)
brd.logo(-4.8, 38.5, Image.open("img/oshw-logo-outline.png").transpose(Image.ROTATE_270), scale = 0.7)
for i,s in enumerate(["(C) 2021", "EXCAMERA LABS", str(__VERSION__)]):
brd.annotate(81, 60 - 1.5 * i, s)
if 1:
brd.fill_any("GTL", "VCC")
brd.fill_any("GBL", "GL2")
name = target + "_dazzler"
brd.save(name)
for n in brd.nets:
print(n)
svgout.write(brd, name + ".svg")
brd.logo(75.8, 6.2, gentext("PLAYER 1"), scale=0.4)
brd.logo(75.8, 46.9, gentext("PLAYER 2"), scale=0.4)
brd.logo(76,
53.3 / 2 - 12,
gentext("1").transpose(Image.ROTATE_90),
scale=1.0)
brd.logo(76,
53.3 / 2 + 12,
gentext("2").transpose(Image.ROTATE_90),
scale=1.0)
brd.logo(75.8,
53.3 / 2,
Image.open("img/oshw-logo-outline.png").transpose(
Image.ROTATE_90),
scale=0.7)
for i, s in enumerate(["(C) 2020", "EXCAMERA LABS", str(__VERSION__)]):
brd.annotate(57.5, 8.5 - 1.5 * i, s)
brd.outline()
if 1:
brd.fill_any("GTL", "VCC")
brd.fill_any("GBL", "GL2")
brd.save("6502")
for n in brd.nets:
print(n)
svgout.write(brd, "6502.svg")
p.setname(nm)
p.copy().w("l 90 f 2").ltext(nm)
gnd(pwr5.s("GND"))
pwr5.s("5V").setwidth(0.4).meet(daz.s("5V"))
# d1 = daz.escapes([str(i) for i in range(1, 15)], -90).forward(5).right(45).wire()
# d2 = daz.escapes([str(i) for i in range(15, 30)], 90).forward(4).spread(1.2).wire()
# daz12 = d1.join(d2, 0.5).wire()
daz.s("VCC").thermal(1).wire()
for nm in ("GND", "GND1", "GND2"):
daz.s(nm).inside().forward(2).wire(width=0.5).w("-")
brd.outline()
if 1:
brd.fill_any("GTL", "VCC")
brd.fill_any("GBL", "GL2")
if 1:
im = Image.open("img/dazzler-logo.png").transpose(Image.ROTATE_270)
brd.logo(13, 64, im)
im = Image.open("img/gd3x-logo.png")
brd.logo(15.7, 71.2, im, 0.8)
im = Image.open("img/oshw-logo-outline.png")
brd.logo(6, 5, im, 0.5)
brd.save("breakout_dazzler")
for n in brd.nets:
print(n)
svgout.write(brd, "breakout_dazzler.svg")
brd.logo(75.8, 6.2, gentext("PLAYER 1"), scale=0.4)
brd.logo(75.8, 46.9, gentext("PLAYER 2"), scale=0.4)
brd.logo(76,
53.3 / 2 - 12,
gentext("1").transpose(Image.ROTATE_90),
scale=1.0)
brd.logo(76,
53.3 / 2 + 12,
gentext("2").transpose(Image.ROTATE_90),
scale=1.0)
brd.logo(75.8,
53.3 / 2,
Image.open("img/oshw-logo-outline.png").transpose(
Image.ROTATE_90),
scale=0.7)
for i, s in enumerate(["(C) 2020", "EXCAMERA LABS", str(__VERSION__)]):
brd.annotate(57.5, 8.5 - 1.5 * i, s)
if 1:
brd.fill_any("GTL", "VCC")
brd.fill_any("GBL", "GL2")
brd.save("arduino_dazzler")
for n in brd.nets:
print(n)
svgout.write(brd, "arduino_dazzler.svg")
teensy.pads[-1]).wire()
straight(teensy.s("16"), daz.pads[8])
straight(teensy.s("17"), daz.pads[7])
sda.w("f 33 r 90").wire().via().setlayer("GTL").goto(
teensy.s("18")).wire()
scl.w("l 90 f 1 r 90 f 35 r 90").wire().via().setlayer("GTL").goto(
teensy.s("19")).wire()
tt = daz.pads[:5][::-1]
[t.w("f 2") for t in tt]
jtag1 = brd.enriver(tt, 45)
jtag1.w("l 45").wire()
tt = teensy.pads[9:14][::-1]
[t.w("l 90 f 1") for t in tt]
jtag2 = brd.enriver(tt, 45).w("f 13 l 45").wire()
jtag1.meet(jtag2)
brd.outline()
if 1:
brd.space = cu.mil(12) # XXX hack the
brd.fill_any("GTL", "GTL")
brd.fill_any("GBL", "GBL")
brd.save("loader")
svgout.write(brd, "loader.svg")
brd.postscript("loader.ps")