def test_ebgp_linear(self):
# Arrange
N = 4
g = get_ebgp_linear_topo(N)
net = "Prefix0"
prefix_map = {net: ip_network(u'128.0.0.0/24')}
addr = (prefix_map[net].hosts().next(), prefix_map[net].prefixlen)
g.set_loopback_addr('R1', 'lo0', ip_interface("%s/%d" % addr))
for i in range(1, N + 1):
first = 'R%d' % (i - 1) if i > 1 else None
middle = 'R%d' % i
last = 'R%d' % (i + 1) if i < N else None
if last:
#if middle == 'R1':
# continue
rline = RouteMapLine(None, None, VALUENOTSET, 10)
rmap = RouteMap('Exp_%s' % last, [rline])
g.add_route_map(middle, rmap)
g.add_bgp_export_route_map(middle, last, rmap.name)
print "ADD EXPORT ROUTE MAP AT", middle, rmap.name
if first:
rmap = RouteMap('Imp_%s' % first, [rline])
g.add_route_map(middle, rmap)
g.add_bgp_import_route_map(middle, first, rmap.name)
print "ADD IMPORT ROUTE MAP AT", middle, rmap.name
#nx.nx_pydot.write_dot(g, '/tmp/linear.xdot')
req = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R2', 'R1'],
strict=False)
ctx = self.create_context([req], g)
# Act
propagation = EBGPPropagation([req], g, ctx)
propagation.compute_dags()
# Assert
ebgp = propagation.ebgp_graphs['Prefix0']
ibgp = propagation.ibgp_graphs['Prefix0']
nx.nx_pydot.write_dot(ebgp, '/tmp/ebgp_linear.xdot')
nx.nx_pydot.write_dot(ibgp, '/tmp/ibgp_linear.xdot')
propagation.synthesize()
solver = z3.Solver(ctx=ctx.z3_ctx)
ret = ctx.check(solver)
assert ret == z3.sat, solver.unsat_core()
propagation.update_network_graph()
gns3 = GNS3Topo(g, prefix_map)
gns3.write_configs('./out-configs/ebgp-linear-%s' % N)
def two_ebgp_nodes(export_path):
"""
Two routers connected via eBGP
Very simple once router announces a single prefix and the other selects it
"""
graph = NetworkGraph()
r1, r2 = 'R1', 'R2'
graph.add_router(r1)
graph.add_router(r2)
graph.add_router_edge(r1, r2)
graph.add_router_edge(r2, r1)
# BGP configs
graph.set_bgp_asnum(r1, 100)
graph.set_bgp_asnum(r2, 200)
# Establish peering
# The actual network interfaces used for peering will be synthesized
graph.add_bgp_neighbor(r1,
r2,
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
# Some internal network
net = ip_network(u'128.0.0.0/24')
prefix = '128_0_0_0'
prefix_map = {prefix: net}
lo0 = 'lo0'
graph.set_loopback_addr(
r1, lo0, ip_interface("%s/%d" % (net.hosts().next(), net.prefixlen)))
# Announce the internal network
graph.add_bgp_announces(r1, lo0)
# The communities recognized by us
comms = [Community("100:10"), Community("100:20")]
# The announcement that will be propagated by R1
ann = Announcement(prefix=prefix,
peer=r1,
origin=BGP_ATTRS_ORIGIN.EBGP,
next_hop='R1Hop',
as_path=[100],
as_path_len=1,
local_pref=100,
med=100,
communities=dict([(c, False) for c in comms]),
permitted=True)
path = PathReq(Protocols.BGP, prefix, ['R2', 'R1'], False)
reqs = [path]
# Get SMT Context
ctx = create_context(reqs, graph, [ann])
propagation = EBGPPropagation(reqs, graph, ctx)
propagation.compute_dags()
propagation.synthesize()
# Synthesize all the interfaces and link configurations
connecte_syn = ConnectedSyn([], graph, full=True)
connecte_syn.synthesize()
# SMT Solving
solver = z3.Solver(ctx=ctx.z3_ctx)
assert ctx.check(solver) == z3.sat, solver.unsat_core()
# Update graph with the concrete values after solver
propagation.update_network_graph()
gns3 = GNS3Topo(graph=graph, prefix_map=prefix_map)
gns3.write_configs('%s/ibgp-simple' % export_path)
def linear_ebgp(N, export_path):
"""
Routers connected in a line and each eBGP pair with it's direct neighbors
"""
# Topology
g = get_ebgp_linear_topo(N)
# Announce locally
prefix = "Prefix0"
net = ip_network(u'128.0.0.0/24')
prefix_map = {prefix: net}
g.set_loopback_addr(
'R1', 'lo0',
ip_interface("%s/%d" % (net.hosts().next(), net.prefixlen)))
g.add_bgp_announces('R1', 'lo0')
# Announcement
comms = [Community("100:10"), Community("100:20")]
cs = dict([(c, False) for c in comms])
# The announcement that will be propagated by R1
ann = get_announcement(prefix=prefix, peer='R1', comms=cs)
# Set up route maps
for i in range(1, N + 1):
first = 'R%d' % (i - 1) if i > 1 else None
middle = 'R%d' % i
last = 'R%d' % (i + 1) if i < N else None
if last:
matches = [MatchAsPath(VALUENOTSET)]
#matches = None
rline = RouteMapLine(matches, None, VALUENOTSET, 10)
deny_line = RouteMapLine(None, None, Access.deny, 100)
rmap = RouteMap('Exp_%s' % last, [rline, deny_line])
g.add_route_map(middle, rmap)
g.add_bgp_export_route_map(middle, last, rmap.name)
if first:
matches = [MatchAsPath(VALUENOTSET)]
#matches = None
rline = RouteMapLine(matches, None, VALUENOTSET, 10)
deny_line = RouteMapLine(None, None, Access.deny, 100)
rmap = RouteMap('Imp_%s' % first, [rline, deny_line])
g.add_route_map(middle, rmap)
g.add_bgp_import_route_map(middle, first, rmap.name)
# nx.nx_pydot.write_dot(g, '/tmp/linear.xdot')
req = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R2', 'R1'],
strict=False)
ctx = create_context([req], g, [ann])
propagation = EBGPPropagation([req], g, ctx)
propagation.compute_dags()
propagation.synthesize()
solver = z3.Solver(ctx=ctx.z3_ctx)
ret = ctx.check(solver)
assert ret == z3.sat, solver.unsat_core()
propagation.update_network_graph()
gns3 = GNS3Topo(g, prefix_map)
gns3.write_configs('%s/linear-ebgp-%d' % (export_path, N))
def two_ebgp_nodes_route_map(export_path):
"""
Two routers connected via eBGP with route maps
Very simple one router announces a single prefix and the other selects it
"""
graph = NetworkGraph()
r1, r2 = 'R1', 'R2'
graph.add_router(r1)
graph.add_router(r2)
graph.add_router_edge(r1, r2)
graph.add_router_edge(r2, r1)
# BGP configs
graph.set_bgp_asnum(r1, 100)
graph.set_bgp_asnum(r2, 200)
# Establish peering
# The actual network interfaces used for peering will be synthesized
graph.add_bgp_neighbor(r1,
r2,
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
# Some internal network
net = ip_network(u'128.0.0.0/24')
prefix = '128_0_0_0'
prefix_map = {prefix: net}
lo0 = 'lo0'
graph.set_loopback_addr(
r1, lo0, ip_interface("%s/%d" % (net.hosts().next(), net.prefixlen)))
# Announce the internal network
graph.add_bgp_announces(r1, lo0)
# The communities recognized by us
comms = [Community("100:10"), Community("100:20")]
# The announcement that will be propagated by R1
ann = Announcement(prefix=prefix,
peer=r1,
origin=BGP_ATTRS_ORIGIN.EBGP,
next_hop='R1Hop',
as_path=[100],
as_path_len=1,
local_pref=100,
med=100,
communities=dict([(c, False) for c in comms]),
permitted=True)
path = PathReq(Protocols.BGP, prefix, ['R2', 'R1'], False)
reqs = [path]
# Create a route map to export from R1 to R2
iplist = IpPrefixList(name='IpList1',
access=Access.permit,
networks=[prefix])
graph.add_ip_prefix_list(r1, iplist)
ip_match = MatchIpPrefixListList(iplist)
set_community = ActionSetCommunity([comms[0]])
rline = RouteMapLine(matches=[ip_match],
actions=[set_community],
access=Access.permit,
lineno=10)
export_map = RouteMap(name="Export_R1_to_R2", lines=[rline])
# Register the route map
graph.add_route_map(r1, export_map)
# Set the route map as an export route map
graph.add_bgp_export_route_map(r1, r2, export_map.name)
# Create a route map to import at R2 to from R1
comm_list = CommunityList(list_id=1,
access=Access.permit,
communities=[comms[0]])
graph.add_bgp_community_list(r2, comm_list)
comm_match = MatchCommunitiesList(comm_list)
set_local_pref = ActionSetLocalPref(200)
rline = RouteMapLine(matches=[MatchNextHop(VALUENOTSET)],
actions=[set_local_pref],
access=Access.permit,
lineno=10)
import_map = RouteMap(name="Import_R2_from_R1", lines=[rline])
# Register the route map
graph.add_route_map(r2, import_map)
# Set the route map as an import route map
graph.add_bgp_import_route_map(r2, r1, import_map.name)
# Get SMT Context
ctx = create_context(reqs, graph, [ann])
propagation = EBGPPropagation(reqs, graph, ctx)
propagation.compute_dags()
propagation.synthesize()
# Synthesize all the interfaces and link configurations
connecte_syn = ConnectedSyn([], graph, full=True)
connecte_syn.synthesize()
# SMT Solving
solver = z3.Solver(ctx=ctx.z3_ctx)
assert ctx.check(solver) == z3.sat, solver.unsat_core()
# Update graph with the concrete values after solver
propagation.update_network_graph()
gns3 = GNS3Topo(graph=graph, prefix_map=prefix_map)
gns3.write_configs('%s/ebgp-route-map' % export_path)
graph.write_graphml('%s/ebgp-route-map/topology.graphml' % export_path)
def test_ibgp_linear(self):
# Arrange
N = 4
g = get_ibgp_linear_topo(N=N)
net = "Prefix0"
prefix_map = {net: ip_network(u'128.0.0.0/24')}
ifaddr = ip_interface(
"%s/%d" %
(prefix_map[net].hosts().next(), prefix_map[net].prefixlen))
g.set_loopback_addr('R1', 'lo0', ifaddr)
for i, node in enumerate(sorted(g.routers_iter())):
g.set_loopback_addr('R%d' % (i + 1), 'lo100',
ip_interface(u'192.168.0.%d/32' % i))
#for i in range(1, N):
# r1 = 'R1'
# r2 = "R%d" % (i + 1)
# g.set_bgp_neighbor_iface(r1, r2, 'lo100')
for i in range(2, N + 1):
r1 = 'R1'
node = 'R%s' % i
rline = RouteMapLine(None, None, VALUENOTSET, 10)
#rmap = RouteMap('Exp_%s' % node, [rline])
#g.add_route_map(r1, rmap)
#g.add_bgp_export_route_map('R1', 'R%d' % i, rmap.name)
rmap = RouteMap('Imp_%s' % r1, [rline])
g.add_route_map(node, rmap)
g.add_bgp_import_route_map(node, r1, rmap.name)
#nx.nx_pydot.write_dot(g, '/tmp/linear.dot')
req1 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R3', 'R1'],
strict=False)
req2 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R2', 'R1'],
strict=False)
reqs = [req1, req2]
ctx = self.create_context(reqs, g)
# Act
propagation = EBGPPropagation(reqs, g, ctx)
propagation.compute_dags()
# Assert
#ebgp = propagation.ebgp_graphs['Prefix0']
#ibgp = propagation.ibgp_graphs['Prefix0']
#nx.nx_pydot.write_dot(ebgp, '/tmp/ebgp_linear.dot')
#nx.nx_pydot.write_dot(ibgp, '/tmp/ibgp_linear.dot')
propagation.synthesize()
solver = z3.Solver(ctx=ctx.z3_ctx)
ret = ctx.check(solver)
assert ret == z3.sat, solver.unsat_core()
propagation.update_network_graph()
for router in g.routers_iter():
g.enable_ospf(router, 100)
for iface in g.get_ifaces(router):
g.add_ospf_network(router, iface, 0)
if router != 'R1':
g.add_ospf_network(
router,
g.get_loopback_addr(router, 'lo100').network, 0)
g.add_ospf_network('R1', g.get_loopback_addr('R1', 'lo0').network, 0)
gns3 = GNS3Topo(g, prefix_map)
gns3.write_configs('./out-configs/ibgp-linear-%d' % N)
def test_good_gadget_ibgp(self):
# Arrange
g = get_griffin_ibgp_graph()
for src in g.routers_iter():
for dst in g.get_bgp_neighbors(src):
if src == dst:
continue
# Export
matches1 = [MatchAsPath(VALUENOTSET)]
matches2 = [MatchAsPath(VALUENOTSET)]
rline1 = RouteMapLine(matches1,
[ActionSetLocalPref(VALUENOTSET)],
VALUENOTSET, 10)
rline2 = RouteMapLine(matches2,
[ActionSetLocalPref(VALUENOTSET)],
VALUENOTSET, 20)
rmap = RouteMap('Exp_%s' % dst, [rline1, rline2])
g.add_route_map(src, rmap)
g.add_bgp_export_route_map(src, dst, rmap.name)
# Import
matches1 = [MatchAsPath(VALUENOTSET)]
matches2 = [MatchAsPath(VALUENOTSET)]
rline1 = RouteMapLine(matches1,
[ActionSetLocalPref(VALUENOTSET)],
VALUENOTSET, 10)
rline2 = RouteMapLine(matches2,
[ActionSetLocalPref(VALUENOTSET)],
VALUENOTSET, 20)
rmap = RouteMap('Imp_%s' % dst, [rline1, rline2])
g.add_route_map(src, rmap)
g.add_bgp_import_route_map(src, dst, rmap.name)
p0 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R2_2', 'R2_0', 'R4', 'R1'],
strict=False)
p1 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R2_2', 'R1'],
strict=False)
r2_req = PathOrderReq(Protocols.BGP,
dst_net='Prefix0',
paths=[p0, p1],
strict=False)
p2 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R3', 'R2_3', 'R1'],
strict=False)
p3 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R3', 'R1'],
strict=False)
r3_req = PathOrderReq(Protocols.BGP,
dst_net='Prefix0',
paths=[p2, p3],
strict=False)
r4_req = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R4', 'R1'],
strict=False)
p6 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R5_3', 'R5_2', 'R5_0', 'R4', 'R1'],
strict=False)
p7 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R5_3', 'R5_1', 'R3', 'R1'],
strict=False)
r5_req = PathOrderReq(Protocols.BGP,
dst_net='Prefix0',
paths=[p6, p7],
strict=False)
reqs = [r2_req, r3_req, r4_req, r5_req]
ctx = self.create_context(reqs, g)
# Act
propagation = EBGPPropagation(reqs, g, ctx)
unmatching_order = propagation.compute_dags()
ebgp = propagation.ebgp_graphs['Prefix0']
ibgp = propagation.ibgp_graphs['Prefix0']
#nx.nx_pydot.write_dot(ibgp, '/tmp/ibgp_good.xdot')
#nx.nx_pydot.write_dot(ebgp, '/tmp/ebgp_good.xdot')
# Assert
assert not unmatching_order
# Assert eBGP propagation
self.assertEqual(ebgp.node[100]['order'], [set([(100, )])])
self.assertEqual(
ebgp.node[200]['order'],
[set([(100, 400, 200)]), set([(100, 200)])])
self.assertEqual(
ebgp.node[300]['order'],
[set([(100, 200, 300)]), set([(100, 300)])])
self.assertEqual(ebgp.node[400]['order'], [set([(100, 400)])])
self.assertEqual(ebgp.node[500]['order'],
[set([(100, 400, 500)]),
set([(100, 300, 500)])])
# Assert iBGP propagation
self.assertEqual(ibgp.node['R1']['order'], [set([('R1', )])])
self.assertEqual(ibgp.node['R2_0']['order'],
[set([('R1', 'R4', 'R2_0')])])
self.assertEqual(ibgp.node['R2_1']['order'], [])
self.assertEqual(
ibgp.node['R2_2']['order'],
[set([('R1', 'R4', 'R2_0', 'R2_2')]),
set([('R1', 'R2_2')])])
self.assertEqual(ibgp.node['R2_3']['order'], [set([('R1', 'R2_3')])])
self.assertEqual(ibgp.node['R3']['order'],
[set([('R1', 'R2_3', 'R3')]),
set([('R1', 'R3')])])
self.assertEqual(ibgp.node['R4']['order'], [set([('R1', 'R4')])])
self.assertEqual(ibgp.node['R5_0']['order'],
[set([('R1', 'R4', 'R5_0')])])
self.assertEqual(ibgp.node['R5_1']['order'],
[set([('R1', 'R3', 'R5_1')])])
self.assertEqual(ibgp.node['R5_2']['order'],
[set([('R1', 'R4', 'R5_0', 'R5_2')])])
self.assertEqual(ibgp.node['R5_3']['order'], [
set([('R1', 'R4', 'R5_0', 'R5_2', 'R5_3')]),
set([('R1', 'R3', 'R5_1', 'R5_3')])
])
propagation.synthesize()
def test_good_gadget(self):
# Arrange
g = get_griffin_graph()
net = "Prefix0"
prefix_map = {net: ip_network(u'128.0.0.0/24')}
addr = (prefix_map[net].hosts().next(), prefix_map[net].prefixlen)
g.set_loopback_addr('R1', 'lo0', ip_interface("%s/%d" % addr))
for src in g.routers_iter():
for dst in g.get_bgp_neighbors(src):
if src == dst:
continue
# Export
ip_list = IpPrefixList(name="L_%s-to_%s" % (src, dst),
access=Access.permit,
networks=[VALUENOTSET])
g.add_ip_prefix_list(src, ip_list)
rline = RouteMapLine([MatchIpPrefixListList(ip_list)],
[ActionSetLocalPref(VALUENOTSET)],
VALUENOTSET, 10)
rmap = RouteMap('Exp_%s' % dst, [rline])
g.add_route_map(src, rmap)
g.add_bgp_export_route_map(src, dst, rmap.name)
# Import
#rline = RouteMapLine(None, [ActionSetLocalPref(VALUENOTSET)], VALUENOTSET, 10)
#rmap = RouteMap('Imp_%s' % dst, [rline])
#g.add_route_map(src, rmap)
#g.add_bgp_import_route_map(src, dst, rmap.name)
rline1 = RouteMapLine([MatchAsPath(VALUENOTSET)],
[ActionSetLocalPref(VALUENOTSET)],
VALUENOTSET, 10)
rline2 = RouteMapLine([MatchAsPath(VALUENOTSET)],
[ActionSetLocalPref(VALUENOTSET)],
VALUENOTSET, 20)
rline3 = RouteMapLine([MatchAsPath(VALUENOTSET)],
[ActionSetLocalPref(VALUENOTSET)],
VALUENOTSET, 30)
rmap = RouteMap('Imp_%s' % dst, [rline1, rline2, rline3])
g.add_route_map(src, rmap)
g.add_bgp_import_route_map(src, dst, rmap.name)
p0 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R2', 'R4', 'R1'],
strict=False)
p1 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R2', 'R1'],
strict=False)
r2_req = PathOrderReq(Protocols.BGP,
dst_net='Prefix0',
paths=[p0, p1],
strict=False)
p2 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R3', 'R2', 'R1'],
strict=False)
p3 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R3', 'R1'],
strict=False)
r3_req = PathOrderReq(Protocols.BGP,
dst_net='Prefix0',
paths=[p2, p3],
strict=False)
r4_req = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R4', 'R1'],
strict=False)
p6 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R5', 'R4', 'R1'],
strict=False)
p7 = PathReq(Protocols.BGP,
dst_net='Prefix0',
path=['R5', 'R3', 'R1'],
strict=False)
r5_req = PathOrderReq(Protocols.BGP,
dst_net='Prefix0',
paths=[p6, p7],
strict=False)
# Action
reqs = [r2_req, r3_req, r4_req, r5_req]
ctx = self.create_context(reqs, g)
propagation = EBGPPropagation(reqs, g, ctx)
unmatching_order = propagation.compute_dags()
assert not unmatching_order
propagation.synthesize()
solver = z3.Solver(ctx=ctx.z3_ctx)
ret = ctx.check(solver)
assert ret == z3.sat, solver.unsat_core()
print solver.model()
propagation.update_network_graph()
gns3 = GNS3Topo(g, prefix_map)
gns3.write_configs('./out-configs/good_gadget')
def bgp(n, nreqs=10):
req_file = './topos/cav/gridrand%d-bgp-%d-req.logic' % (n, nreqs)
topo = gen_grid_topology(n, n, 0)
static_reqs, ospf_reqs, bgp_reqs = read_reqs(req_file)
seed = 159734782
path_gen = 200
ospfRand = random.Random(seed)
for node in topo.routers_iter():
topo.enable_ospf(node, 100)
topo.set_bgp_asnum(node, 100)
# Initially all costs are empty
topo.set_static_routes_empty(node)
for src, dst in topo.edges():
topo.set_edge_ospf_cost(src, dst, VALUENOTSET)
peer = 'ATT'
egresses = set([p.path[-2] for p in bgp_reqs])
topo.add_peer(peer)
topo.set_bgp_asnum(peer, 5000)
for req in bgp_reqs:
req.path.append(peer)
for egress in egresses:
topo.add_peer_edge(peer, egress)
topo.add_peer_edge(egress, peer)
topo.add_bgp_neighbor(peer, egress, VALUENOTSET, VALUENOTSET)
for src in topo.local_routers_iter():
for dst in topo.local_routers_iter():
if src == dst or dst in topo.get_bgp_neighbors(src):
continue
topo.add_bgp_neighbor(src, dst, VALUENOTSET, VALUENOTSET)
prefix = 'GOOGLE'
communities = [Community("100:%d" % i) for i in range(5)]
ann = Announcement(prefix=prefix,
peer=peer,
origin=BGP_ATTRS_ORIGIN.EBGP,
as_path=[1, 2, 5000],
as_path_len=3,
next_hop='%sHop' % peer,
local_pref=100,
med=10,
communities=dict([(c, False) for c in communities]),
permitted=True)
topo.add_bgp_advertise(peer, ann)
conn = ConnectedSyn([], topo, full=True)
conn.synthesize()
static_syn = StaticSyn(static_reqs, topo)
static_syn.synthesize()
ospf = OSPFCEGIS(topo, gen_paths=path_gen, random_obj=ospfRand)
for req in ospf_reqs:
ospf.add_req(req)
assert ospf.synthesize(allow_ecmp=True)
assert not ospf.removed_reqs
for router in topo.local_routers_iter():
count = itertools.count(1)
for neighbor in topo.get_bgp_neighbors(router):
if router == neighbor:
continue
comm_list = CommunityList(
list_id=count.next(),
access=Access.permit,
communities=[VALUENOTSET, VALUENOTSET, VALUENOTSET])
topo.add_bgp_community_list(router, comm_list)
match_comm = MatchCommunitiesList(comm_list)
iplist = IpPrefixList(name='ip%s' % count.next(),
access=Access.permit,
networks=[VALUENOTSET])
topo.add_ip_prefix_list(router, iplist)
match_ip = MatchIpPrefixListList(iplist)
match_next_hop = MatchNextHop(VALUENOTSET)
match_sel = MatchSelectOne([match_comm, match_next_hop, match_ip])
actions = [
ActionSetLocalPref(VALUENOTSET),
ActionSetCommunity([VALUENOTSET], True)
]
rline = RouteMapLine([match_sel], actions, VALUENOTSET, 10)
dline = RouteMapLine(None, None, Access.deny, 100)
rmap = RouteMap("Rimp_%s_from_%s" % (router, neighbor),
lines=[rline, dline])
topo.add_route_map(router, rmap)
topo.add_bgp_import_route_map(router, neighbor, rmap.name)
ctx = create_context(bgp_reqs, topo, [ann])
p = EBGPPropagation(bgp_reqs, topo, ctx)
p.compute_dags()
p.synthesize()
solver = z3.Solver()
ret = ctx.check(solver)
assert ret == z3.sat, solver.unsat_core()
p.update_network_graph()