def _setup_ui(self):
hbox = QtGui.QHBoxLayout(self)
self.setLayout(hbox)
form_vbox = self.vbox = QtGui.QVBoxLayout(self)
hbox2 = QtGui.QVBoxLayout(self)
self.device_and_state = DevnameAndState(self)
hbox2.addWidget(self.device_and_state)
self.magnet_type_label = QtGui.QLabel("Magnet type:")
hbox2.addWidget(self.magnet_type_label)
form_vbox.addLayout(hbox2)
# attributes
self.form = MAXForm(withButtons=False)
form_vbox.addWidget(self.form, stretch=1)
self.status_area = StatusArea(self)
form_vbox.addWidget(self.status_area)
hbox.addLayout(form_vbox)
# value bar
self.valuebar = MAXValueBar(self)
slider_vbox = QtGui.QVBoxLayout(self)
slider_vbox.setContentsMargins(10, 10, 10, 10)
hbox.addLayout(slider_vbox)
self.current_label = TaurusLabel()
self.current_label.setAlignment(QtCore.Qt.AlignCenter)
slider_vbox.addWidget(self.valuebar, 1)
slider_vbox.addWidget(self.current_label)
def _setup_ui(self):
hbox = QtGui.QHBoxLayout(self)
self.setLayout(hbox)
form_vbox = QtGui.QVBoxLayout(self)
# devicename label
hbox2 = QtGui.QVBoxLayout(self)
self.device_and_state = DevnameAndState(self)
hbox2.addWidget(self.device_and_state, stretch=2)
# commands
commandbox = QtGui.QHBoxLayout(self)
self.start_button = TaurusCommandButton(command="Start")
self.start_button.setUseParentModel(True)
self.stop_button = TaurusCommandButton(command="Stop")
self.stop_button.setUseParentModel(True)
self.init_button = TaurusCommandButton(command="Init")
self.init_button.setUseParentModel(True)
self.on_button = TaurusCommandButton(command="On")
self.on_button.setUseParentModel(True)
self.off_button = TaurusCommandButton(command="Off")
self.off_button.setUseParentModel(True)
self.enable_trigger_button = TaurusCommandButton(
command="EnableTrigger")
self.enable_trigger_button.setUseParentModel(True)
self.disable_trigger_button = TaurusCommandButton(
command="DisableTrigger")
self.disable_trigger_button.setUseParentModel(True)
self.reset_button = TaurusCommandButton(command="Reset")
self.reset_button.setUseParentModel(True)
commandbox.addWidget(self.start_button)
commandbox.addWidget(self.stop_button)
commandbox.addWidget(self.init_button)
commandbox.addWidget(self.on_button)
commandbox.addWidget(self.off_button)
commandbox.addWidget(self.enable_trigger_button)
commandbox.addWidget(self.disable_trigger_button)
commandbox.addWidget(self.reset_button)
hbox2.addLayout(commandbox, stretch=1)
form_vbox.addLayout(hbox2)
# attributes
self.form = MAXForm(withButtons=False)
form_vbox.addLayout(commandbox)
form_vbox.addWidget(self.form, stretch=1)
self.status_area = StatusArea()
form_vbox.addWidget(self.status_area)
hbox.addLayout(form_vbox)
# value bar
self.valuebar = MAXValueBar(self)
slider_vbox = QtGui.QVBoxLayout(self)
slider_vbox.setContentsMargins(10, 10, 10, 10)
hbox.addLayout(slider_vbox)
self.current_label = TaurusLabel()
self.current_label.setAlignment(QtCore.Qt.AlignCenter)
slider_vbox.addWidget(self.valuebar, 1)
slider_vbox.addWidget(self.current_label)
def _test2():
import sys
from taurus.qt.qtgui.application import TaurusApplication
from taurus.qt.qtgui.display import TaurusLabel
app = TaurusApplication()
tl = TaurusLabel()
tl.setModel(ATTR_IPAP_POS)
tl.show()
sys.exit(app.exec_())
def setModel(self, model):
TaurusLabel.setModel(self, '%s/value' % model) #@todo: change this (it assumes tango naming!)
try: ior_dev = taurus.Device(model)
except: return
labels = ior_dev.getAttribute('Labels').read().value
labels_list = labels.split(' ')
# Update the mapping
self.readEventValueMap = EventValueMap()
for label_and_value in labels_list:
label, value = label_and_value.split(':')
self.readEventValueMap[int(value)] = label
def test2():
import sys
from taurus.qt.qtgui.application import TaurusApplication
from taurus.qt.qtgui.display import TaurusLabel
app = TaurusApplication()
w = TaurusLabel()
# calculates free space in Mb
attrname = 'eval:@taurus.core.evaluation.dev_example.FreeSpaceDevice/getFreeSpace("/")'
w.setModel(attrname)
w.show()
sys.exit(app.exec_())
def setModel(self, model):
# @todo: change this (it assumes tango naming!)
TaurusLabel.setModel(self, '%s/value' % model)
try:
ior_dev = taurus.Device(model)
except:
return
labels = ior_dev.getAttribute('Labels').read().value
labels_list = labels.split(' ')
# Update the mapping
self.readEventValueMap = EventValueMap()
for label_and_value in labels_list:
label, value = label_and_value.split(':')
self.readEventValueMap[int(value)] = label
def get_one_motor_widget(self, name):
widget = QtGui.QWidget(self.central_widget)
layout = QtGui.QGridLayout(widget)
motor_name = QtGui.QLabel(widget)
motor_name.setText(name)
layout.addWidget(motor_name, 0, 0)
taurus_led = TaurusLed(widget)
taurus_led.setMaximumSize(QtCore.QSize(50, 50))
taurus_led.setMinimumSize(QtCore.QSize(30, 30))
taurus_led.setModel(name + '/State')
layout.addWidget(taurus_led, 0, 1)
taurus_label = TaurusLabel(widget)
taurus_label.setModel(name + '/Status')
taurus_label.setMinimumSize(QtCore.QSize(260, 140))
layout.addWidget(taurus_label, 1, 0, 2, 2)
taurus_mano = EditableManoMeter(widget)
taurus_mano.setMaximumSize(QtCore.QSize(500, 500))
l_lim, u_lim = self.get_limits(name + '/Position')
taurus_mano.setProperScales(l_lim, u_lim)
taurus_mano.setModel(name + '/Position')
layout.addWidget(taurus_mano, 0, 2, 2, 1)
taurus_line_edit = TaurusValueLineEdit(widget)
taurus_line_edit.setModel(name + "/Position")
layout.addWidget(taurus_line_edit, 2, 2)
# limit_switches_label = QtGui.QLabel(widget)
# limit_switches_label.setText('Limit switches:')
# layout.addWidget(limit_switches_label, 0, 3, 1, 2)
#
# lower_limit_switch = TaurusLed(widget)
# lower_limit_switch.setModel(name + 'Limit_switches')
# lower_limit_switch.setModelIndex('1')
# lower_limit_switch.setMinimumSize(QtCore.QSize(30, 30))
# lower_limit_switch.setMaximumSize(QtCore.QSize(50, 50))
# layout.addWidget(lower_limit_switch, 1, 3)
layout.setColumnStretch(0, 1)
layout.setColumnStretch(1, 1)
widget.setLayout(layout)
return widget
def __init__(self, parent=None, designMode=False):
TaurusWidget.__init__(self, parent, designMode)
self.loadUi()
self.ioreg_dev = None
self.alias_label = TaurusLabel()
self.alias_label.setBgRole('state')
self.value_label = PoolIORegisterReadWidget()
self.button_value_dict = {}
policy = self.value_label.sizePolicy()
policy.setHorizontalPolicy(Qt.QSizePolicy.Expanding)
self.value_label.setSizePolicy(policy)
self.ui.lo_state_read.addWidget(self.alias_label)
self.ui.lo_state_read.addWidget(self.value_label)
def motorHBox(self, motor, num):
# one dict for the step size, one for the jump position
stepline = self.steplinedict.get(num)
posline = self.poslinedict.get(num)
# following is the construction of a hor. motor block,
# to be contained in self.groupBox2_1 (first line of the second box)
self.groupBox2_1 = Qt.QGroupBox(motor)
self.groupBox2_1.setMaximumHeight(90)
hbox = Qt.QHBoxLayout()
stepline.setPlaceholderText('Schrittweite')
stepline.setMinimumHeight(40)
stepline.setMaximumWidth(150)
stepline.returnPressed.connect(lambda: self.stepButton(num))
hbox.addWidget(stepline)
posline.setPlaceholderText('Zielposition')
posline.returnPressed.connect(lambda: self.newPos(num))
posline.setMinimumHeight(40)
posline.setMaximumWidth(150)
posline.setMaxLength(80)
hbox.addWidget(posline)
hbox.addStretch()
'''
this button could be used for a "jog"-function. just click.connect it
to the function needed
buttonLL = Qt.QPushButton(Qt.QIcon('actions:go-backward.svg'), '', self)
buttonLL.setMinimumHeight(40)
buttonLL.setMinimumWidth(60)
hbox.addWidget(buttonLL)
'''
buttonL = Qt.QPushButton(Qt.QIcon('actions:left.svg'), '', self)
buttonL.clicked.connect(lambda: self.moveL(num))
buttonL.setMinimumHeight(40)
buttonL.setMinimumWidth(60)
hbox.addWidget(buttonL)
w = TaurusLabel()
w.setMaximumHeight(40)
w.setMinimumWidth(80)
hbox.addWidget(w)
w.model = motor
buttonR = Qt.QPushButton(Qt.QIcon('actions:right.svg'), '', self)
buttonR.clicked.connect(lambda: self.moveR(num))
buttonR.setMinimumHeight(40)
buttonR.setMinimumWidth(60)
hbox.addWidget(buttonR)
'''
buttonRR = Qt.QPushButton(Qt.QIcon('actions:go-forward.svg'), '', self)
buttonRR.setMinimumHeight(40)
buttonRR.setMinimumWidth(60)
hbox.addWidget(buttonRR)
'''
self.groupBox2_1.setLayout(hbox)
return self.groupBox2_1
class PoolIORegister(TaurusWidget):
''' A widget that displays and controls a pool IORegister device.
It reads the value and provides a combobox to write it.
NOTE: It would be nice to provide 'ABORT' button if the device allows it.
NOTE: It would be nice to set icons for each possible value label.
'''
def __init__(self, parent=None, designMode=False):
TaurusWidget.__init__(self, parent, designMode)
self.ioreg_dev = None
self.setLayout(Qt.QHBoxLayout())
self.layout().setContentsMargins(0, 0, 0, 0)
self.layout().setSpacing(0)
self.alias_label = TaurusLabel()
self.alias_label.setBgRole('state')
self.layout().addWidget(self.alias_label)
self.read_widget = PoolIORegisterReadWidget()
self.layout().addWidget(self.read_widget)
self.write_widget = PoolIORegisterWriteWidget()
self.layout().addWidget(self.write_widget)
def setModel(self, model):
try:
self.ioreg_dev = taurus.Device(model)
except:
return
self.alias_label.setModel('%s/State?configuration=dev_alias' % model)
self.read_widget.setModel(model)
self.write_widget.setModel(model)
def showEvent(self, event):
TaurusWidget.showEvent(self, event)
if self.ioreg_dev is not None:
self.ioreg_dev.getAttribute('Value').enablePolling(force=True)
def hideEvent(self, event):
TaurusWidget.hideEvent(self, event)
if self.ioreg_dev is not None:
self.ioreg_dev.getAttribute('Value').disablePolling()
class PoolIORegister(TaurusWidget):
''' A widget that displays and controls a pool IORegister device.
It reads the value and provides a combobox to write it.
NOTE: It would be nice to provide 'ABORT' button if the device allows it.
NOTE: It would be nice to set icons for each possible value label.
'''
def __init__(self, parent=None, designMode=False):
TaurusWidget.__init__(self, parent, designMode)
self.ioreg_dev = None
self.setLayout(Qt.QHBoxLayout())
self.layout().setContentsMargins(0, 0, 0, 0)
self.layout().setSpacing(0)
self.alias_label = TaurusLabel()
self.alias_label.setBgRole('state')
self.layout().addWidget(self.alias_label)
self.read_widget = PoolIORegisterReadWidget()
self.layout().addWidget(self.read_widget)
self.write_widget = PoolIORegisterWriteWidget()
self.layout().addWidget(self.write_widget)
def setModel(self, model):
try:
self.ioreg_dev = taurus.Device(model)
except:
return
self.alias_label.setModel('%s/State?configuration=dev_alias' % model)
self.read_widget.setModel(model)
self.write_widget.setModel(model)
def showEvent(self, event):
TaurusWidget.showEvent(self, event)
if self.ioreg_dev is not None:
self.ioreg_dev.getAttribute('Value').enablePolling(force=True)
def hideEvent(self, event):
TaurusWidget.hideEvent(self, event)
if self.ioreg_dev is not None:
self.ioreg_dev.getAttribute('Value').disablePolling()
def __init__(self, parent=None, designMode=False):
TaurusWidget.__init__(self, parent, designMode)
self.ioreg_dev = None
self.setLayout(Qt.QHBoxLayout())
self.layout().setContentsMargins(0, 0, 0, 0)
self.layout().setSpacing(0)
self.alias_label = TaurusLabel()
self.alias_label.setBgRole('state')
self.layout().addWidget(self.alias_label)
self.read_widget = PoolIORegisterReadWidget()
self.layout().addWidget(self.read_widget)
self.write_widget = PoolIORegisterWriteWidget()
self.layout().addWidget(self.write_widget)
def __init__(self, parent=None, designMode=False, defaultWriteMode=None):
TaurusWidget.__init__(self, parent=parent, designMode=designMode)
self._tableView = TaurusValuesIOTable(self)
l = Qt.QGridLayout()
l.addWidget(self._tableView, 1, 0)
self._tableView.itemDelegate().editorCreated.connect(
self._onEditorCreated)
if defaultWriteMode is None:
self.defaultWriteMode = "rw"
else:
self.defaultWriteMode = defaultWriteMode
self._label = TaurusLabel()
self._label.setBgRole('quality')
self._label.setFgRole('quality')
self._units = Qt.QComboBox()
self._applyBT = Qt.QPushButton('Apply')
self._cancelBT = Qt.QPushButton('Cancel')
self._applyBT.clicked.connect(self.okClicked)
self._cancelBT.clicked.connect(self.cancelClicked)
self._rwModeCB = Qt.QCheckBox()
self._rwModeCB.setText('Write mode')
self._rwModeCB.toggled.connect(self.setWriteMode)
lv = Qt.QHBoxLayout()
lv.addWidget(self._label)
lv.addWidget(self._units)
l.addLayout(lv, 2, 0)
l.addWidget(self._rwModeCB, 0, 0)
lv = Qt.QHBoxLayout()
lv.addWidget(self._applyBT)
lv.addWidget(self._cancelBT)
l.addLayout(lv, 3, 0)
self._writeMode = False
self.setLayout(l)
self._initActions()
def _setup_ui(self):
grid = QtGui.QGridLayout(self)
self.setLayout(grid)
grid.addWidget(QtGui.QLabel("Device:"), 0, 0)
self.devicename_label = QtGui.QLabel("<devicename>")
self.devicename_label.setTextInteractionFlags(QtCore.Qt.TextSelectableByMouse)
grid.addWidget(self.devicename_label, 0, 1)
grid.addWidget(QtGui.QLabel("State:"), 1, 0)
hbox = QtGui.QHBoxLayout(self)
# self.state_led = TaurusLed()
# hbox.addWidget(self.state_led)
self.state_label = TaurusLabel()
policy = QtGui.QSizePolicy()
self.state_label.setBgRole("state")
policy.setHorizontalPolicy(QtGui.QSizePolicy.Expanding)
self.state_label.setSizePolicy(policy)
hbox.addWidget(self.state_label)
# hbox.insertStretch(2, 1)
grid.addLayout(hbox, 1, 1, alignment=QtCore.Qt.AlignLeft)
grid.setColumnStretch(1, 1)
def getFormatedToolTip(self, cache=True):
taurus_label_tooltip = TaurusLabel.getFormatedToolTip(self, cache)
try:
display_value = int(self.getDisplayValue())
extended_tooltip = ''
value_keys = sorted(self.readEventValueMap.keys())
for value in value_keys:
label = self.readEventValueMap[value]
value_label_info = '%d: %s' % (value, label)
if value == display_value:
value_label_info = '<B>* ' + value_label_info + ' *</B>'
extended_tooltip += value_label_info + '<BR>'
return taurus_label_tooltip + '<HR>' + extended_tooltip
except:
pass
return taurus_label_tooltip
def getFormatedToolTip(self, cache=True):
taurus_label_tooltip = TaurusLabel.getFormatedToolTip(self, cache)
try:
display_value = int(self.getDisplayValue())
extended_tooltip = ''
value_keys = sorted(self.readEventValueMap.keys())
for value in value_keys:
label = self.readEventValueMap[value]
value_label_info = '%d: %s' % (value, label)
if value == display_value:
value_label_info = '<B>* ' + value_label_info + ' *</B>'
extended_tooltip += value_label_info + '<BR>'
return taurus_label_tooltip + '<HR>' + extended_tooltip
except:
pass
return taurus_label_tooltip
def _test2():
import sys
from taurus.qt.qtgui.application import TaurusApplication
from taurus.qt.qtgui.display import TaurusLabel
app = TaurusApplication(cmd_line_parser=None)
tl = TaurusLabel()
tl.setModel(ATTR_IPAP_POS)
tl.show()
sys.exit(app.exec_())
def __init__(self, parent=None, designMode=False):
TaurusWidget.__init__(self, parent, designMode)
self.loadUi()
self.ioreg_dev = None
self.alias_label = TaurusLabel()
self.alias_label.setBgRole('state')
self.value_label = PoolIORegisterReadWidget()
self.button_value_dict = {}
policy = self.value_label.sizePolicy()
policy.setHorizontalPolicy(Qt.QSizePolicy.Expanding)
self.value_label.setSizePolicy(policy)
self.ui.lo_state_read.addWidget(self.alias_label)
self.ui.lo_state_read.addWidget(self.value_label)
def __init__(self, parent=None, designMode=False):
TaurusWidget.__init__(self, parent, designMode)
self.ioreg_dev = None
self.setLayout(Qt.QHBoxLayout())
self.layout().setContentsMargins(0, 0, 0, 0)
self.layout().setSpacing(0)
self.alias_label = TaurusLabel()
self.alias_label.setBgRole('state')
self.layout().addWidget(self.alias_label)
self.read_widget = PoolIORegisterReadWidget()
self.layout().addWidget(self.read_widget)
self.write_widget = PoolIORegisterWriteWidget()
self.layout().addWidget(self.write_widget)
class DevnameAndState(TaurusWidget):
"""A widget that displays the name and state of a device"""
def __init__(self, parent=None):
TaurusWidget.__init__(self, parent)
self._setup_ui()
def _setup_ui(self):
grid = QtGui.QGridLayout(self)
self.setLayout(grid)
grid.addWidget(QtGui.QLabel("Device:"), 0, 0)
self.devicename_label = QtGui.QLabel("<devicename>")
self.devicename_label.setTextInteractionFlags(QtCore.Qt.TextSelectableByMouse)
grid.addWidget(self.devicename_label, 0, 1)
grid.addWidget(QtGui.QLabel("State:"), 1, 0)
hbox = QtGui.QHBoxLayout(self)
# self.state_led = TaurusLed()
# hbox.addWidget(self.state_led)
self.state_label = TaurusLabel()
policy = QtGui.QSizePolicy()
self.state_label.setBgRole("state")
policy.setHorizontalPolicy(QtGui.QSizePolicy.Expanding)
self.state_label.setSizePolicy(policy)
hbox.addWidget(self.state_label)
# hbox.insertStretch(2, 1)
grid.addLayout(hbox, 1, 1, alignment=QtCore.Qt.AlignLeft)
grid.setColumnStretch(1, 1)
def setModel(self, device):
TaurusWidget.setModel(self, device)
self.devicename_label.setText("<b>%s</b>" % device)
# self.state_led.setModel("%s/State" % device)
if device:
self.state_label.setModel("%s/State" % device)
else:
self.state_label.setModel(None)
def test2():
import sys
from taurus.qt.qtgui.application import TaurusApplication
from taurus.qt.qtgui.display import TaurusLabel
app = TaurusApplication()
w = TaurusLabel()
# calculates free space in Mb
attrname = 'eval:@taurus.core.evaluation.dev_example.FreeSpaceDevice/getFreeSpace("/")'
w.setModel(attrname)
w.show()
sys.exit(app.exec_())
def test_class_format(monkeypatch, qtbot, caplog, model, fmt, fg):
"""Check formatter API at class level"""
monkeypatch.setattr(TaurusLabel, "FORMAT", fmt)
with check_taurus_deprecations(caplog, expected=0):
w = TaurusLabel()
qtbot.addWidget(w)
w.setModel(model)
w.resetFormat() # needed to avoid fuzzyness in the tests
def _ok():
"""Check text"""
assert w.text() == fg
qtbot.waitUntil(_ok, timeout=3200)
def __init__(self, parent=None, designMode=False,
defaultWriteMode=None):
TaurusWidget.__init__(self, parent=parent, designMode=designMode)
self._tableView = TaurusValuesIOTable(self)
l = Qt.QGridLayout()
l.addWidget(self._tableView, 1, 0)
self._tableView.itemDelegate().editorCreated.connect(self._onEditorCreated)
if defaultWriteMode is None:
self.defaultWriteMode = "rw"
else:
self.defaultWriteMode = defaultWriteMode
self._label = TaurusLabel()
self._label.setBgRole('quality')
self._label.setFgRole('quality')
self._units = Qt.QComboBox()
self._applyBT = Qt.QPushButton('Apply')
self._cancelBT = Qt.QPushButton('Cancel')
self._applyBT.clicked.connect(self.okClicked)
self._cancelBT.clicked.connect(self.cancelClicked)
self._rwModeCB = Qt.QCheckBox()
self._rwModeCB.setText('Write mode')
self._rwModeCB.toggled.connect(self.setWriteMode)
lv = Qt.QHBoxLayout()
lv.addWidget(self._label)
lv.addWidget(self._units)
l.addLayout(lv, 2, 0)
l.addWidget(self._rwModeCB, 0, 0)
lv = Qt.QHBoxLayout()
lv.addWidget(self._applyBT)
lv.addWidget(self._cancelBT)
l.addLayout(lv, 3, 0)
self._writeMode = False
self.setLayout(l)
self._initActions()
def get_one_motor_widget(self, name):
widget = QtGui.QWidget(self.central_widget)
layout = QtGui.QGridLayout(widget)
motor_name = QtGui.QLabel(widget)
motor_name.setText(name)
layout.addWidget(motor_name, 0, 0)
taurus_led = TaurusLed(widget)
taurus_led.setMaximumSize(QtCore.QSize(50, 50))
taurus_led.setMinimumSize(QtCore.QSize(30, 30))
taurus_led.setModel(name + '/State')
layout.addWidget(taurus_led, 0, 1)
taurus_label = TaurusLabel(widget)
taurus_label.setModel(name + '/Status')
taurus_label.setMinimumSize(QtCore.QSize(260, 140))
layout.addWidget(taurus_label, 1, 0, 2, 2)
taurus_mano = EditableManoMeter(widget)
taurus_mano.setMaximumSize(QtCore.QSize(500, 500))
l_lim, u_lim = self.get_limits(name + '/Position')
taurus_mano.setProperScales(l_lim, u_lim)
taurus_mano.setModel(name + '/Position')
layout.addWidget(taurus_mano, 0, 2, 2, 1)
taurus_line_edit = TaurusValueLineEdit(widget)
taurus_line_edit.setModel(name + "/Position")
layout.addWidget(taurus_line_edit, 2, 2)
# limit_switches_label = QtGui.QLabel(widget)
# limit_switches_label.setText('Limit switches:')
# layout.addWidget(limit_switches_label, 0, 3, 1, 2)
#
# lower_limit_switch = TaurusLed(widget)
# lower_limit_switch.setModel(name + 'Limit_switches')
# lower_limit_switch.setModelIndex('1')
# lower_limit_switch.setMinimumSize(QtCore.QSize(30, 30))
# lower_limit_switch.setMaximumSize(QtCore.QSize(50, 50))
# layout.addWidget(lower_limit_switch, 1, 3)
layout.setColumnStretch(0, 1)
layout.setColumnStretch(1, 1)
widget.setLayout(layout)
return widget
def setModel(self, model):
if model is not None:
self.device = taurus.Device(model)
self.pseudo_motor_names = []
for motor in self.device.hklpseudomotorlist:
self.pseudo_motor_names.append(motor.split(' ')[0])
self.h_device_name = self.pseudo_motor_names[0]
self.h_device = taurus.Device(self.h_device_name)
self.k_device_name = self.pseudo_motor_names[1]
self.k_device = taurus.Device(self.k_device_name)
self.l_device_name = self.pseudo_motor_names[2]
self.l_device = taurus.Device(self.l_device_name)
# Set model to hkl components
hmodel = self.h_device_name + "/Position"
self._ui.taurusValueLineH.setModel(hmodel)
self._ui.taurusLabelValueH.setModel(hmodel)
kmodel = self.k_device_name + "/Position"
self._ui.taurusValueLineK.setModel(kmodel)
self._ui.taurusLabelValueK.setModel(kmodel)
lmodel = self.l_device_name + "/Position"
self._ui.taurusValueLineL.setModel(lmodel)
self._ui.taurusLabelValueL.setModel(lmodel)
# Add dynamically the angle widgets
motor_list = self.device.motorlist
self.motor_names = []
self.motor_devices = []
for motor in self.device.motorlist:
self.motor_names.append(motor.split(' ')[0])
self.motor_devices.append(
taurus.Device(self.motor_names[len(self.motor_names) - 1]))
self.nb_motors = len(motor_list)
angles_labels = []
self.angles_names = []
angles_taurus_label = []
angles_taurus_input = []
gap_x = 650 / self.nb_motors
try:
self.angles_names = self.device.motorroles
except: # Only for compatibility
if self.nb_motors == 4:
self.angles_names.append("omega")
self.angles_names.append("chi")
self.angles_names.append("phi")
self.angles_names.append("theta")
elif self.nb_motors == 6:
self.angles_names.append("mu")
self.angles_names.append("th")
self.angles_names.append("chi")
self.angles_names.append("phi")
self.angles_names.append("gamma")
self.angles_names.append("delta")
for i in range(0, self.nb_motors):
angles_labels.append(QtGui.QLabel(self))
angles_labels[i].setGeometry(
QtCore.QRect(150 + gap_x * i, 40, 71, 17))
angles_labels[i].setLayoutDirection(QtCore.Qt.RightToLeft)
alname = "angleslabel" + str(i)
angles_labels[i].setObjectName(alname)
angles_labels[i].setText(
QtGui.QApplication.translate("HKLScan", self.angles_names[i],
None,
QtGui.QApplication.UnicodeUTF8))
angles_taurus_label.append(TaurusLabel(self))
angles_taurus_label[i].setGeometry(
QtCore.QRect(150 + gap_x * i, 70, 81, 19))
atlname = "anglestauruslabel" + str(i)
angles_taurus_label[i].setObjectName(atlname)
angles_taurus_label[i].setModel(self.motor_names[i] + "/Position")
angles_taurus_input.append(TaurusValueLineEdit(self))
angles_taurus_input[i].setGeometry(
QtCore.QRect(145 + gap_x * i, 100, 91, 27))
atlname = "anglestaurusinput" + str(i)
angles_taurus_input[i].setObjectName(atlname)
angles_taurus_input[i].setModel(self.motor_names[i] + "/Position")
# Set model to engine and modes
enginemodel = model + '/engine'
self._ui.taurusLabelEngine.setModel(enginemodel)
enginemodemodel = model + '/enginemode'
self._ui.taurusLabelEngineMode.setModel(enginemodemodel)
self.enginemodescombobox = EngineModesComboBox(self)
self.enginemodescombobox.setGeometry(QtCore.QRect(150, 315, 221, 27))
self.enginemodescombobox.setObjectName("enginemodeslist")
self.enginemodescombobox.loadEngineModeNames(self.device.hklmodelist)
self.connect(self.enginemodescombobox,
Qt.SIGNAL("currentIndexChanged(QString)"),
self.onModeChanged)
# Add dynamically the scan buttons, range inputs and 'to max' buttons
scan_buttons = []
self.range_inputs = []
self.tomax_buttons = [
] # The text will be change when the max. is computed
exec_functions = [
self.exec_scan1, self.exec_scan2, self.exec_scan3, self.exec_scan4,
self.exec_scan5, self.exec_scan6
]
tomax_functions = [
self.tomax_scan1, self.tomax_scan2, self.tomax_scan3,
self.tomax_scan4, self.tomax_scan5, self.tomax_scan6
]
gap_x = 650 / self.nb_motors
for i in range(0, self.nb_motors):
scan_buttons.append(QtGui.QPushButton(self))
scan_buttons[i].setGeometry(
QtCore.QRect(150 + gap_x * i, 405, 100, 26))
wname = "scanbutton" + str(i)
scan_buttons[i].setObjectName(wname)
scan_buttons[i].setText(
QtGui.QApplication.translate("DiffractometerAlignment",
self.angles_names[i], None,
QtGui.QApplication.UnicodeUTF8))
self.connect(scan_buttons[i], Qt.SIGNAL("clicked()"),
exec_functions[i])
self.range_inputs.append(QtGui.QLineEdit(self))
self.range_inputs[i].setGeometry(
QtCore.QRect(150 + gap_x * i, 440, 100, 26))
self.range_inputs[i].setLayoutDirection(QtCore.Qt.RightToLeft)
wname = "rangeinput" + str(i)
self.range_inputs[i].setObjectName(wname)
self.tomax_buttons.append(QtGui.QPushButton(self))
self.tomax_buttons[i].setGeometry(
QtCore.QRect(150 + gap_x * i, 475, 100, 26))
wname = "tomaxbutton" + str(i)
self.tomax_buttons[i].setObjectName(wname)
self.tomax_buttons[i].setText(
QtGui.QApplication.translate("DiffractometerAlignment", 'n.n.',
None,
QtGui.QApplication.UnicodeUTF8))
self.connect(self.tomax_buttons[i], Qt.SIGNAL("clicked()"),
tomax_functions[i])
def updateTable(self):
global checkList
checkList = []
# filtre venant du choix du combobox
# Recherche dans le dictionnaire
if filterTypes.has_key(str(self.comboBoxType.currentText())):
value_filterTypes = filterTypes.get(
str(self.comboBoxType.currentText()))
else:
value_filterTypes = 'All'
if filterZones.has_key(str(self.comboBoxZone.currentText())):
value_filterZones = filterZones.get(
str(self.comboBoxZone.currentText()))
else:
value_filterZones = 'All'
# nettoyage de la zone a ecrire
self.clearLayout(self.gridLayout)
# Header du tableau a ecrire après chaque .clear
#self.tableWidget.setHorizontalHeaderLabels(['Names','Current','Voltage'])
# If "All" is used, no filter is applied
# cette methode n'existe pas : il faut trouver un equivalent
# self.tableWidget.insertItems(0,[text for text in items if text_filter in text + "All"])
k = -1
#self.gridLayout.addWidget(self.styledPanel(),k,0,1,8)
for device in DeviceList:
if value_filterTypes in device + "All":
if value_filterZones in device + "All":
# test line
k += 1
self.gridLayout.addWidget(self.Hline(), k, 0, 1, 8)
k += 1
self.gridLayout.setRowMinimumHeight(k, 40)
# Bouton ouverture device
self.buttonDevice = QtGui.QPushButton()
self.buttonDevice.setText(device)
self.buttonDevice.clicked.connect(AfficheDevice(device))
self.gridLayout.addWidget(self.buttonDevice, k, 0)
# Afficheur courant
self.afficheurCurrent = TaurusLabel()
self.afficheurCurrent.setModel(device + '/double_scalar')
self.gridLayout.addWidget(self.afficheurCurrent, k, 1)
# Afficheur tension
self.afficheurVoltage = TaurusLabel()
self.afficheurVoltage.setModel(device + '/float_scalar')
self.gridLayout.addWidget(self.afficheurVoltage, k, 2)
# Lecture consigne courant
self.afficheurCurrentSP = TaurusLabel()
self.afficheurCurrentSP.setModel(device + '/ampli')
self.gridLayout.addWidget(self.afficheurCurrentSP, k, 3)
# Ecriture consigne courant
self.writeCurrentSP = TaurusWheelEdit()
self.writeCurrentSP.setModel(device + '/ampli')
self.gridLayout.addWidget(self.writeCurrentSP, k, 4)
# Afficheur etat
self.afficheurState = TaurusLabel()
self.afficheurState.setModel(device + '/State')
self.gridLayout.addWidget(self.afficheurState, k, 5)
# CheckBox de selection
self.buttonSelect = QtGui.QCheckBox(device, self)
self.gridLayout.addWidget(self.buttonSelect, k, 6)
checkList.append(self.buttonSelect)
# Bouton commande Taurus
self.commandButtonSwitch = TaurusCommandButton(
command='SwitchStates', text='Switch State')
self.commandButtonSwitch.setModel(device)
self.gridLayout.addWidget(self.commandButtonSwitch, k, 7)
self.scrollArea.setWidget(self.contenu)
import sys from taurus.external.qt import Qt from taurus.qt.qtgui.application import TaurusApplication app = TaurusApplication(sys.argv) panel = Qt.QWidget() layout = Qt.QHBoxLayout() panel.setLayout(layout) from taurus.qt.qtgui.display import TaurusLabel w = TaurusLabel() layout.addWidget(w) w.model = 'sys/tg_test/1/double_scalar' panel.show() sys.exit(app.exec_())
def __init__(self, parent=None, model=None, palette=None, bound=True):
TaurusWidget.__init__(self, parent)
if palette:
self.setPalette(palette)
self.setLayout(Qt.QGridLayout())
self.bound = bound
self._dups = []
self.setWindowTitle('TaurusDevicePanel')
self._label = Qt.QLabel()
self._label.font().setBold(True)
self._stateframe = TaurusWidget(self)
self._stateframe.setLayout(Qt.QGridLayout())
self._stateframe.layout().addWidget(Qt.QLabel('State'), 0, 0,
Qt.Qt.AlignCenter)
self._statelabel = TaurusLabel(self._stateframe)
self._statelabel.setMinimumWidth(100)
self._statelabel.setBgRole('value')
self._stateframe.layout().addWidget(self._statelabel, 0, 1,
Qt.Qt.AlignCenter)
self._statusframe = Qt.QScrollArea(self)
self._status = TaurusLabel(self._statusframe)
self._status.setBgRole('none')
self._status.setAlignment(Qt.Qt.AlignLeft)
self._status.setFixedHeight(2000)
self._status.setFixedWidth(5000)
# self._statusframe.setFixedHeight(STATUS_HEIGHT)
self._statusframe.setHorizontalScrollBarPolicy(Qt.Qt.ScrollBarAlwaysOn)
self._statusframe.setVerticalScrollBarPolicy(Qt.Qt.ScrollBarAlwaysOn)
self._statusframe.setWidget(self._status)
self._statusframe.setPalette(get_White_palette())
self._attrsframe = Qt.QTabWidget(self)
# Horizontal will not allow to show labels of attributes!
self._splitter = Qt.QSplitter(Qt.Qt.Vertical, self)
self._attrs, self._comms = None, None
self.layout().addWidget(self._splitter, 0, 0)
self._header = Qt.QFrame()
self._header.setFixedHeight(1.1 * IMAGE_SIZE[1])
self._header.setLayout(Qt.QGridLayout())
self._dup = Qt.QPushButton()
qpixmap = Qt.QIcon("actions:window-new.svg")
self._dup.setIcon(Qt.QIcon(qpixmap))
self._dup.setIconSize(Qt.QSize(15, 15))
self._dup.pressed.connect(self.duplicate)
self._image = Qt.QLabel()
self._header.layout().addWidget(self._image, 0, 0, 2, 1,
Qt.Qt.AlignCenter)
self._header.layout().addWidget(self._label, 0, 1, Qt.Qt.AlignLeft)
self._header.layout().addWidget(self._stateframe, 1, 1, 1, 2,
Qt.Qt.AlignLeft)
self._header.layout().addWidget(self._dup, 0, 2, Qt.Qt.AlignRight)
self._splitter.insertWidget(0, self._header)
self._splitter.insertWidget(1, self._attrsframe)
self._splitter.insertWidget(2, self._statusframe)
self._splitter.setSizes(SPLIT_SIZES)
[
self._splitter.setStretchFactor(i, v)
for i, v in enumerate(SPLIT_SIZES)
]
self._splitter.setCollapsible(0, False)
self._splitter.setCollapsible(1, False)
if model:
self.setModel(model)
def setModel(self, model):
if model is not None:
self.device = taurus.Device(model)
self.pseudo_motor_names = []
for motor in self.device.hklpseudomotorlist:
self.pseudo_motor_names.append(motor.split(' ')[0])
self.h_device_name = self.pseudo_motor_names[0]
self.h_device = taurus.Device(self.h_device_name)
self.k_device_name = self.pseudo_motor_names[1]
self.k_device = taurus.Device(self.k_device_name)
self.l_device_name = self.pseudo_motor_names[2]
self.l_device = taurus.Device(self.l_device_name)
# Add dynamically the angle widgets
motor_list = self.device.motorlist
motor_names = []
for motor in self.device.motorlist:
motor_names.append(motor.split(' ')[0])
self.nb_motors = len(motor_list)
angles_labels = []
angles_names = []
angles_taurus_label = []
gap_x = 800 / self.nb_motors
try:
angles_names = self.device.motorroles
except: # Only for compatibility
if self.nb_motors == 4:
angles_names.append("omega")
angles_names.append("chi")
angles_names.append("phi")
angles_names.append("theta")
elif self.nb_motors == 6:
angles_names.append("mu")
angles_names.append("th")
angles_names.append("chi")
angles_names.append("phi")
angles_names.append("gamma")
angles_names.append("delta")
for i in range(0, self.nb_motors):
angles_labels.append(QtGui.QLabel(self))
angles_labels[i].setGeometry(
QtCore.QRect(50 + gap_x * i, 290, 51, 17))
alname = "angleslabel" + str(i)
angles_labels[i].setObjectName(alname)
angles_labels[i].setText(
QtGui.QApplication.translate("HKLScan", angles_names[i], None,
QtGui.QApplication.UnicodeUTF8))
angles_taurus_label.append(TaurusLabel(self))
angles_taurus_label[i].setGeometry(
QtCore.QRect(50 + gap_x * i, 320, 81, 19))
atlname = "anglestauruslabel" + str(i)
angles_taurus_label[i].setObjectName(atlname)
angles_taurus_label[i].setModel(motor_names[i] + "/Position")
# Set model to hkl display
hmodel = self.h_device_name + "/Position"
self._ui.taurusValueLineH.setModel(hmodel)
self._ui.taurusLabelValueH.setModel(hmodel)
kmodel = self.k_device_name + "/Position"
self._ui.taurusValueLineK.setModel(kmodel)
self._ui.taurusLabelValueK.setModel(kmodel)
lmodel = self.l_device_name + "/Position"
self._ui.taurusValueLineL.setModel(lmodel)
self._ui.taurusLabelValueL.setModel(lmodel)
# Set model to engine and modes
enginemodel = model + '/engine'
self._ui.taurusLabelEngine.setModel(enginemodel)
enginemodemodel = model + '/enginemode'
self._ui.taurusLabelEngineMode.setModel(enginemodemodel)
self.enginemodescombobox = EngineModesComboBox(self)
self.enginemodescombobox.setGeometry(QtCore.QRect(150, 445, 221, 27))
self.enginemodescombobox.setObjectName("enginemodeslist")
self.enginemodescombobox.loadEngineModeNames(self.device.hklmodelist)
self.connect(self.enginemodescombobox,
Qt.SIGNAL("currentIndexChanged(QString)"),
self.onModeChanged)
class TaurusDevicePanel(TaurusWidget):
'''
TaurusDevPanel is a Taurus Application inspired in Jive and Atk Panel.
It Provides a Device selector and a panel for displaying information from
the selected device.
'''
# TODO: Tango-centric (This whole class should be called TangoDevicePanel)
# TODO: a scheme-agnostic base class should be implemented
READ_ONLY = False
# A dictionary like {device_regexp:[attribute_regexps]}
_attribute_filter = {}
# A dictionary like {device_regexp:[(command_regexp,default_args)]}
_command_filter = {}
_icon_map = {} # A dictionary like {device_regexp:pixmap_url}
@classmethod
def setIconMap(klass, filters):
"""A dictionary like {device_regexp:pixmap_url}"""
klass._icon_map = filters
@classmethod
def getIconMap(klass):
return klass._icon_map
@classmethod
def setAttributeFilters(klass, filters):
"""
It will set the attribute filters
filters will be like: {device_regexp:[attribute_regexps]}
example: {'.*/VGCT-.*': ['ChannelState','p[0-9]']}
"""
klass._attribute_filter.update(filters)
@classmethod
def getAttributeFilters(klass):
return klass._attribute_filter
@classmethod
def setCommandFilters(klass, filters):
"""
It will set the command filters
filters will be like: {device_regexp:[command_regexps]}
example::
{'.*/IPCT-.*': (
('setmode',('SERIAL','LOCAL','STEP','FIXED','START','PROTECT')),
('onhv1',()), ('offhv1',()), ('onhv2',()), ('offhv2',()),
('sendcommand',())
),}
"""
klass._command_filter.update(filters)
@classmethod
def getCommandFilters(klass):
return klass._command_filter
###########################################################################
def __init__(self, parent=None, model=None, palette=None, bound=True):
TaurusWidget.__init__(self, parent)
if palette:
self.setPalette(palette)
self.setLayout(Qt.QGridLayout())
self.bound = bound
self._dups = []
self.setWindowTitle('TaurusDevicePanel')
self._label = Qt.QLabel()
self._label.font().setBold(True)
self._stateframe = TaurusWidget(self)
self._stateframe.setLayout(Qt.QGridLayout())
self._stateframe.layout().addWidget(Qt.QLabel('State'), 0, 0, Qt.Qt.AlignCenter)
self._statelabel = TaurusLabel(self._stateframe)
self._statelabel.setMinimumWidth(100)
self._statelabel.setBgRole('state')
self._stateframe.layout().addWidget(self._statelabel, 0, 1, Qt.Qt.AlignCenter)
self._state = TaurusLed(self._stateframe)
self._state.setShowQuality(False)
self._stateframe.layout().addWidget(self._state, 0, 2, Qt.Qt.AlignCenter)
self._statusframe = Qt.QScrollArea(self)
self._status = TaurusLabel(self._statusframe)
self._status.setBgRole('none')
self._status.setAlignment(Qt.Qt.AlignLeft)
self._status.setFixedHeight(2000)
self._status.setFixedWidth(5000)
# self._statusframe.setFixedHeight(STATUS_HEIGHT)
self._statusframe.setHorizontalScrollBarPolicy(Qt.Qt.ScrollBarAlwaysOn)
self._statusframe.setVerticalScrollBarPolicy(Qt.Qt.ScrollBarAlwaysOn)
self._statusframe.setWidget(self._status)
self._statusframe.setPalette(get_White_palette())
self._attrsframe = Qt.QTabWidget(self)
# Horizontal will not allow to show labels of attributes!
self._splitter = Qt.QSplitter(Qt.Qt.Vertical, self)
self._attrs, self._comms = None, None
self.layout().addWidget(self._splitter, 0, 0)
self._header = Qt.QFrame()
self._header.setFixedHeight(1.1 * IMAGE_SIZE[1])
self._header.setLayout(Qt.QGridLayout())
self._dup = Qt.QPushButton()
qpixmap = Qt.QIcon("actions:window-new.svg")
self._dup.setIcon(Qt.QIcon(qpixmap))
self._dup.setIconSize(Qt.QSize(15, 15))
self._dup.pressed.connect(self.duplicate)
self._image = Qt.QLabel()
self._header.layout().addWidget(self._image, 0, 0, 2, 1, Qt.Qt.AlignCenter)
self._header.layout().addWidget(self._label, 0, 1, Qt.Qt.AlignLeft)
self._header.layout().addWidget(self._stateframe, 1, 1, 1, 2, Qt.Qt.AlignLeft)
self._header.layout().addWidget(self._dup, 0, 2, Qt.Qt.AlignRight)
self._splitter.insertWidget(0, self._header)
self._splitter.insertWidget(1, self._attrsframe)
self._splitter.insertWidget(2, self._statusframe)
self._splitter.setSizes(SPLIT_SIZES)
[self._splitter.setStretchFactor(i, v)
for i, v in enumerate(SPLIT_SIZES)]
self._splitter.setCollapsible(0, False)
self._splitter.setCollapsible(1, False)
if model:
self.setModel(model)
def loadConfigFile(self, ifile=None):
self.info('In TaurusDevicePanel.loadConfigFile(%s)' % ifile)
if isinstance(ifile, file) or isinstance(ifile, str) and not ifile.endswith('.py'):
TaurusWidget.loadConfigFile(self, ifile)
else:
from imp import load_source
config_file = load_source('config_file', ifile)
af, cf, im = [getattr(config_file, x, None) for x in (
'AttributeFilters', 'CommandFilters', 'IconMap')]
if af is not None:
self.setAttributeFilters(af)
if cf is not None:
self.setCommandFilters(cf)
if im is not None:
self.setIconMap(im)
self.debug('AttributeFilters are:\n%s' % self.getAttributeFilters())
def duplicate(self):
self._dups.append(TaurusDevicePanel(bound=False))
self._dups[-1].setModel(self.getModel())
self._dups[-1].show()
@Qt.pyqtSlot('QString')
def setModel(self, model, pixmap=None):
model, modelclass, raw = str(model).strip(), '', model
if model:
model = model and model.split()[0] or ''
modelclass = taurus.Factory().findObjectClass(model)
self.trace('In TaurusDevicePanel.setModel(%s(%s),%s)' %
(raw, modelclass, pixmap))
if model == self.getModel():
return
elif raw is None or not model or not modelclass:
if self.getModel():
self.detach()
return
elif issubclass(modelclass, TaurusAttribute):
# if model.lower().endswith('/state'):
model = model.rsplit('/', 1)[0] # TODO: Tango-centric
elif not issubclass(modelclass, TaurusDevice):
self.warning('TaurusDevicePanel accepts only Device models')
return
try:
taurus.Device(model).ping() # TODO: Tango-centric
if self.getModel():
self.detach() # Do not dettach previous model before pinging the new one (fail message will be shown at except: clause)
TaurusWidget.setModel(self, model)
self.setWindowTitle(str(model).upper())
model = self.getModel()
self._label.setText(model.upper())
font = self._label.font()
font.setPointSize(15)
self._label.setFont(font)
if pixmap is None and self.getIconMap():
for k, v in self.getIconMap().items():
if searchCl(k, model):
pixmap = v
if pixmap is not None:
# print 'Pixmap is %s'%pixmap
qpixmap = Qt.QPixmap(pixmap)
if qpixmap.height() > .9 * IMAGE_SIZE[1]:
qpixmap = qpixmap.scaledToHeight(.9 * IMAGE_SIZE[1])
if qpixmap.width() > .9 * IMAGE_SIZE[0]:
qpixmap = qpixmap.scaledToWidth(.9 * IMAGE_SIZE[0])
else:
logo = getattr(tauruscustomsettings, 'ORGANIZATION_LOGO',
"logos:taurus.png")
qpixmap = getCachedPixmap(logo)
self._image.setPixmap(qpixmap)
self._state.setModel(model + '/state') # TODO: Tango-centric
if hasattr(self, '_statelabel'):
self._statelabel.setModel(
model + '/state') # TODO: Tango-centric
self._status.setModel(model + '/status') # TODO: Tango-centric
try:
self._attrsframe.clear()
filters = get_regexp_dict(
TaurusDevicePanel._attribute_filter, model, ['.*'])
if hasattr(filters, 'keys'):
filters = filters.items() # Dictionary!
if filters and isinstance(filters[0], (list, tuple)): # Mapping
self._attrs = []
for tab, attrs in filters:
self._attrs.append(self.get_attrs_form(
device=model, filters=attrs, parent=self))
self._attrsframe.addTab(self._attrs[-1], tab)
else:
if self._attrs and isinstance(self._attrs, list):
self._attrs = self._attrs[0]
self._attrs = self.get_attrs_form(
device=model, form=self._attrs, filters=filters, parent=self)
if self._attrs:
self._attrsframe.addTab(self._attrs, 'Attributes')
if not TaurusDevicePanel.READ_ONLY:
self._comms = self.get_comms_form(model, self._comms, self)
if self._comms:
self._attrsframe.addTab(self._comms, 'Commands')
if SPLIT_SIZES:
self._splitter.setSizes(SPLIT_SIZES)
except:
self.warning(traceback.format_exc())
qmsg = Qt.QMessageBox(Qt.QMessageBox.Critical, '%s Error' %
model, '%s not available' % model, Qt.QMessageBox.Ok, self)
qmsg.setDetailedText(traceback.format_exc())
qmsg.show()
except:
self.warning(traceback.format_exc())
qmsg = Qt.QMessageBox(Qt.QMessageBox.Critical, '%s Error' %
model, '%s not available' % model, Qt.QMessageBox.Ok, self)
qmsg.show()
self.setWindowTitle(self.getModel())
return
def detach(self):
self.trace('In TaurusDevicePanel(%s).detach()' % self.getModel())
_detached = []
# long imports to avoid comparison problems in the isinstance below
import taurus.qt.qtgui.container
import taurus.qt.qtgui.base
def detach_recursive(obj):
if obj in _detached:
return
if isinstance(obj, taurus.qt.qtgui.container.TaurusBaseContainer):
for t in obj.taurusChildren():
detach_recursive(t)
if obj is not self and isinstance(obj, taurus.qt.qtgui.base.TaurusBaseWidget):
try:
if getattr(obj, 'model', None):
#self.debug('detaching %s from %s'%(obj,obj.model))
obj.setModel([] if isinstance(obj, TaurusForm) else '')
except:
self.warning('detach of %s failed!' % obj)
self.warning(traceback.format_exc())
_detached.append(obj)
detach_recursive(self)
try:
self._label.setText('')
self._state.setModel('')
if hasattr(self, '_statelabel'):
self._statelabel.setModel('')
self._status.setModel('')
self._image.setPixmap(Qt.QPixmap())
except:
self.warning(traceback.format_exc())
def get_attrs_form(self, device, form=None, filters=None, parent=None):
filters = filters or get_regexp_dict(
TaurusDevicePanel._attribute_filter, device, ['.*'])
self.trace('In TaurusDevicePanel.get_attrs_form(%s,%s)' %
(device, filters))
allattrs = sorted(str(a) for a in taurus.Device(
device).get_attribute_list() if str(a).lower() not in ('state', 'status'))
attrs = []
for a in filters:
for t in allattrs:
if a and searchCl(a.strip(), t.strip()):
aname = '%s/%s' % (device, t)
if aname not in attrs:
attrs.append(aname)
if attrs:
#self.trace( 'Matching attributes are: %s' % str(attrs)[:100])
if form is None:
form = TaurusForm(parent)
elif hasattr(form, 'setModel'):
form.setModel([])
# Configuring the TauForm:
form.setWithButtons(False)
form.setWindowTitle(device)
try:
form.setModel(attrs)
except Exception:
self.warning(
'TaurusDevicePanel.ERROR: Unable to setModel for TaurusDevicePanel.attrs_form!!: %s' % traceback.format_exc())
return form
else:
return None
def get_comms_form(self, device, form=None, parent=None):
self.trace('In TaurusDevicePanel.get_comms_form(%s)' % device)
params = get_regexp_dict(TaurusDevicePanel._command_filter, device, [])
# If filters are defined only listed devices will show commands
if TaurusDevicePanel._command_filter and not params:
self.debug(
'TaurusDevicePanel.get_comms_form(%s): By default an unknown device type will display no commands' % device)
return None
if not form:
form = TaurusCommandsForm(parent)
elif hasattr(form, 'setModel'):
form.setModel('')
try:
form.setModel(device)
if params:
form.setSortKey(lambda x, vals=[s[0].lower() for s in params]: vals.index(
x.cmd_name.lower()) if str(x.cmd_name).lower() in vals else 100)
form.setViewFilters([lambda c: str(c.cmd_name).lower() not in (
'state', 'status') and any(searchCl(s[0], str(c.cmd_name)) for s in params)])
form.setDefaultParameters(dict((k, v) for k, v in (
params if not hasattr(params, 'items') else params.items()) if v))
for wid in form._cmdWidgets:
if not hasattr(wid, 'getCommand') or not hasattr(wid, 'setDangerMessage'):
continue
if re.match('.*(on|off|init|open|close).*', str(wid.getCommand().lower())):
wid.setDangerMessage(
'This action may affect other systems!')
# form._splitter.setStretchFactor(1,70)
# form._splitter.setStretchFactor(0,30)
form._splitter.setSizes([80, 20])
except Exception:
self.warning(
'Unable to setModel for TaurusDevicePanel.comms_form!!: %s' % traceback.format_exc())
return form
class TaurusValuesTable(TaurusWidget):
'''
A table for displaying and/or editing 1D/2D Taurus attributes
'''
_showQuality = False
_writeMode = False
def __init__(self, parent=None, designMode=False,
defaultWriteMode=None):
TaurusWidget.__init__(self, parent=parent, designMode=designMode)
self._tableView = TaurusValuesIOTable(self)
l = Qt.QGridLayout()
l.addWidget(self._tableView, 1, 0)
self._tableView.itemDelegate().editorCreated.connect(self._onEditorCreated)
if defaultWriteMode is None:
self.defaultWriteMode = "rw"
else:
self.defaultWriteMode = defaultWriteMode
self._label = TaurusLabel()
self._label.setBgRole('quality')
self._label.setFgRole('quality')
self._units = Qt.QComboBox()
self._applyBT = Qt.QPushButton('Apply')
self._cancelBT = Qt.QPushButton('Cancel')
self._applyBT.clicked.connect(self.okClicked)
self._cancelBT.clicked.connect(self.cancelClicked)
self._rwModeCB = Qt.QCheckBox()
self._rwModeCB.setText('Write mode')
self._rwModeCB.toggled.connect(self.setWriteMode)
lv = Qt.QHBoxLayout()
lv.addWidget(self._label)
lv.addWidget(self._units)
l.addLayout(lv, 2, 0)
l.addWidget(self._rwModeCB, 0, 0)
lv = Qt.QHBoxLayout()
lv.addWidget(self._applyBT)
lv.addWidget(self._cancelBT)
l.addLayout(lv, 3, 0)
self._writeMode = False
self.setLayout(l)
self._initActions()
def _initActions(self):
"""Initializes the actions for this widget (currently, the pause action.)
"""
self._pauseAction = Qt.QAction("&Pause", self)
self._pauseAction.setShortcuts([Qt.Qt.Key_P, Qt.Qt.Key_Pause])
self._pauseAction.setCheckable(True)
self._pauseAction.setChecked(False)
self.addAction(self._pauseAction)
self._pauseAction.toggled.connect(self.setPaused)
self.chooseModelAction = Qt.QAction("Choose &Model", self)
self.chooseModelAction.setEnabled(self.isModifiableByUser())
self.addAction(self.chooseModelAction)
self.chooseModelAction.triggered[()].connect(self.chooseModel)
def getModelClass(self):
'''see :meth:`TaurusWidget.getModelClass`'''
return taurus.core.taurusattribute.TaurusAttribute
def setModel(self, model):
'''Reimplemented from :meth:`TaurusWidget.setModel`'''
TaurusWidget.setModel(self, model)
model_obj = self.getModelObj()
if model_obj.isWritable() and self.defaultWriteMode != "r":
self._writeMode = True
else:
self.defaultWriteMode = "r"
if model_obj is not None:
self._tableView._attr = model_obj
if model_obj.type in [DataType.Integer, DataType.Float]:
if self._writeMode:
try:
default_unit = str(model_obj.wvalue.units)
except AttributeError:
default_unit = ''
else:
default_unit = str(model_obj.rvalue.units)
# TODO: fill the combobox with the compatible units
self._units.addItem("%s" % default_unit)
self._units.setCurrentIndex(self._units.findText(default_unit))
self._units.setEnabled(False)
else:
self._units.setVisible(False)
raiseException = False
if model_obj.data_format == DataFormat._2D:
try:
dim_x, dim_y = numpy.shape(model_obj.rvalue)
except ValueError:
raiseException = True
elif model_obj.data_format == DataFormat._1D:
try:
dim_x, dim_y = len(model_obj.rvalue), 1
except ValueError:
raiseException = True
else:
raiseException = True
if raiseException:
raise Exception('rvalue is invalid')
self._tableView.setModel([dim_x, dim_y])
self.setWriteMode(self._writeMode)
self._label.setModel(model)
def handleEvent(self, evt_src, evt_type, evt_value):
'''see :meth:`TaurusWidget.handleEvent`'''
#@fixme: in some situations, we may miss some config event because of the qmodel not being set. The whole handleEvent Method and setModel method should be re-thought
model = self._tableView.model()
if model is None:
return
if evt_type in (TaurusEventType.Change,
TaurusEventType.Periodic)\
and evt_value is not None:
attr = self.getModelObj()
model.setAttr(attr)
model.setWriteMode(self._writeMode)
hh = self._tableView.horizontalHeader()
hh.setResizeMode(Qt.QHeaderView.Fixed)
vh = self._tableView.verticalHeader()
vh.setResizeMode(Qt.QHeaderView.Fixed)
if self.defaultWriteMode == "r":
isWritable = False
else:
isWritable = True
writable = isWritable and self._writeMode and\
attr.isWritable()
self.setWriteMode(writable)
elif evt_type == TaurusEventType.Config:
# force a read to set an attr
attr = self.getModelObj()
model.setAttr(attr)
def contextMenuEvent(self, event):
'''Reimplemented from :meth:`QWidget.contextMenuEvent`'''
menu = Qt.QMenu()
globalPos = event.globalPos()
menu.addAction(self.chooseModelAction)
menu.addAction(self._pauseAction)
if self._writeMode:
index = self._tableView.selectedIndexes()[0]
if index.isValid():
val = self._tableView.model().getReadValue(index)
if self._tableView.model().getModifiedDict().has_key((index.row(), index.column())):
menu.addAction(Qt.QIcon.fromTheme(
'edit-undo'), "Reset to original value (%s) " % repr(val), self._tableView.removeChange)
menu.addSeparator()
menu.addAction(Qt.QIcon.fromTheme('process-stop'),
"Reset all table", self.askCancel)
menu.addSeparator()
menu.addAction(Qt.QIcon.fromTheme('help-browser'),
"Help", self._tableView.showHelp)
menu.exec_(globalPos)
event.accept()
def applyChanges(self):
'''
Writes table modifications to the device server.
'''
tab = self._tableView.model().getModifiedWriteData()
attr = self.getModelObj()
if attr.type == DataType.String:
# String arrays has to be converted to a list
tab = tab.tolist()
attr.write(tab)
self._tableView.model().clearChanges()
def okClicked(self):
"""This is a SLOT that is being triggered when ACCEPT button is clicked.
.. note:: This SLOT is called, when user wants to apply table modifications.
When no cell was modified it will not be called. When
modifications have been done, they will be writen to w_value
of an attribute.
"""
if self._tableView.model().isDirty():
self.applyChanges()
self.resetWriteMode()
def cancelClicked(self):
"""This is a SLOT that is being triggered when CANCEL button is clicked.
.. note:: This SLOT is called, when user does not want to apply table
modifications. When no cell was modified it will not be called.
"""
if self._tableView.model().isDirty():
self.askCancel()
def askCancel(self):
'''
Shows a QMessageBox, asking if user wants to cancel all changes. Triggered when user clicks Cancel button.
'''
result = Qt.QMessageBox.warning(self, 'Your changes will be lost!',
'Do you want to cancel changes done to the whole table?',
Qt.QMessageBox.Ok | Qt.QMessageBox.Cancel)
if result == Qt.QMessageBox.Ok:
self._tableView.cancelChanges()
self.resetWriteMode()
def _onEditorCreated(self):
'''slot called when an editor has been created'''
self.setWriteMode(self._writeMode)
def getWriteMode(self):
'''whether the widget is showing the read or write values
:return: (bool)'''
return self._writeMode
def setWriteMode(self, isWrite):
'''
Triggered when the read mode is changed to write mode.
:param isWrite: (bool)
'''
self._applyBT.setVisible(isWrite)
self._cancelBT.setVisible(isWrite)
self._rwModeCB.setChecked(isWrite)
if self.defaultWriteMode in ("rw", "wr"):
self._rwModeCB.setVisible(True)
else:
self._rwModeCB.setVisible(False)
table_view_model = self._tableView.model()
if table_view_model is not None:
table_view_model.setWriteMode(isWrite)
table_view_model._editable = isWrite
if isWrite == self._writeMode:
return
self._writeMode = isWrite
valueObj = self.getModelValueObj()
if isWrite and valueObj is not None:
w_value = valueObj.wvalue
value = valueObj.rvalue
if numpy.array(w_value).shape != numpy.array(value).shape:
ta = self.getModelObj()
v = ta.read()
# @fixme: this is ugly! we should not be writing into the attribute without asking first...
ta.write(v.rvalue)
def resetWriteMode(self):
'''equivalent to self.setWriteMode(self.defaultWriteMode)'''
if self.defaultWriteMode == "r":
isWritable = False
else:
isWritable = True
self.setWriteMode(isWritable)
@classmethod
def getQtDesignerPluginInfo(cls):
'''Reimplemented from :meth:`TaurusWidget.getQtDesignerPluginInfo`'''
ret = TaurusWidget.getQtDesignerPluginInfo()
ret['module'] = 'taurus.qt.qtgui.table'
ret['group'] = 'Taurus Views'
ret['icon'] = "designer:table.png"
return ret
def chooseModel(self):
'''shows a model chooser'''
from taurus.qt.qtgui.panel import TaurusModelChooser
selectables = [TaurusElementType.Attribute]
models, ok = TaurusModelChooser.modelChooserDlg(
selectables=selectables, singleModel=True)
if ok and len(models) == 1:
self.setModel(models[0])
def setModifiableByUser(self, modifiable):
'''Reimplemented from :meth:`TaurusWidget.setModifiableByUser`'''
self.chooseModelAction.setEnabled(modifiable)
TaurusWidget.setModifiableByUser(self, modifiable)
def isReadOnly(self):
'''Reimplemented from :meth:`TaurusWidget.isReadOnly`'''
return False
#-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
# QT property definition
#-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
model = Qt.pyqtProperty("QString", TaurusWidget.getModel,
setModel,
TaurusWidget.resetModel)
writeMode = Qt.pyqtProperty(
"bool", getWriteMode, setWriteMode, resetWriteMode)
def setupUi(self, Dialog, csvDevices, attributeNames):
"""Sets up the AttributeWidget Dialog
:param Dialog: AttributeWidget Dialog
:param csvDevices: list of CsvDevice instances, used in this view
:param attributeNames: list of attribute names, used in this view"""
csvDeviceMap = {}
for csvDevice in csvDevices:
if not csvDeviceMap.has_key(csvDevice.getClassName()):
csvDeviceMap[csvDevice.getClassName()] = [csvDevice]
else:
csvDeviceMap[csvDevice.getClassName()].append(csvDevice)
self.dialog = Dialog
self.panels = []
self.devNames = []
for csvDevice in csvDevices:
self.devNames.append(csvDevice.getDeviceName())
self.attNames = attributeNames
Dialog.setObjectName(_fromUtf8("Dialog"))
Dialog.resize(400, 500)
self.gridLayout = QtGui.QGridLayout(Dialog)
self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
self.scrollArea = QtGui.QScrollArea(Dialog)
self.scrollArea.setWidgetResizable(True)
self.scrollArea.setObjectName(_fromUtf8("scrollArea"))
self.scrollAreaWidgetContents = QtGui.QWidget()
self.scrollAreaWidgetContents.setGeometry(QtCore.QRect(0, 0, 530, 397))
self.scrollAreaWidgetContents.setObjectName(_fromUtf8("scrollAreaWidgetContents"))
boldFont = QtGui.QFont()
boldFont.setBold(True)
boldFont.setWeight(75)
self.devicesLayout = QtGui.QVBoxLayout(self.scrollAreaWidgetContents)
for className in csvDeviceMap.keys():
#print className
classWidget = QtGui.QWidget()
classLayout = QtGui.QVBoxLayout(classWidget)
classHeader = ShowHideButton(classWidget, className)
classHeader.setStyleSheet("font-weight: bold;")
devCounter = 0
for csvDevice in csvDeviceMap[className]:
deviceHeader = QtGui.QHBoxLayout()
attributeLayout = QtGui.QGridLayout()
attCounter = 0
for attributeName in attributeNames:
attributeInfo = csvDevice.getAttributeInfo(attributeName)
if attributeInfo:
attributeNameLabel = QtGui.QLabel(Dialog)
attributeNameLabel.setText(_translate("Dialog", attributeName + ":", None))
attributeLayout.addWidget(attributeNameLabel, attCounter, 0, 1, 1)
if attributeInfo.data_format == PyTango.AttrDataFormat.SCALAR:
attributeValue = TaurusLabel(Dialog)
attributeValue.setModel(csvDevice.getDeviceName() + "/" + attributeName)
attributeLayout.addWidget(attributeValue, attCounter, 1, 1, 1)
units = QtGui.QLabel(Dialog)
units.setText("N/A")
try:
units.setText(PyTango.AttributeProxy(csvDevice.getDeviceName() + "/" + attributeName).get_config().unit)
except PyTango.DevFailed:
pass
units.setSizePolicy(QtGui.QSizePolicy.Maximum, QtGui.QSizePolicy.Maximum)
attributeLayout.addWidget(units, attCounter, 2, 1, 1)
elif attributeInfo.data_format == PyTango.AttrDataFormat.SPECTRUM:
widget = Extra.TaurusCurveDialog()
widget.setWindowFlags(QtCore.Qt.WindowCloseButtonHint | QtCore.Qt.WindowMaximizeButtonHint | QtCore.Qt.WindowMinimizeButtonHint)
widget.setModel(csvDevice.getDeviceName() + "/" + attributeName)
widget.setWindowTitle(csvDevice.getDeviceName() + "/" + attributeName)
attributeValue = ShowPanelButton(QtGui.QIcon(':/designer/qwtplot.png'), "Show")
attributeValue.setWidget(widget)
attributeLayout.addWidget(attributeValue, attCounter, 1, 1, 1)
else:
widget = Extra.TaurusImageDialog()
widget.setWindowFlags(QtCore.Qt.WindowCloseButtonHint | QtCore.Qt.WindowMaximizeButtonHint | QtCore.Qt.WindowMinimizeButtonHint)
widget.setModel(csvDevice.getDeviceName() + "/" + attributeName)
widget.setWindowTitle(csvDevice.getDeviceName() + "/" + attributeName)
attributeValue = ShowPanelButton(QtGui.QIcon(':/mimetypes/image-x-generic.svg'), "Show")
attributeValue.setWidget(widget)
attributeLayout.addWidget(attributeValue, attCounter, 1, 1, 1)
attCounter += 1
if attCounter > 0:
deviceNameLabel = QtGui.QLabel(Dialog)
deviceNameLabel.setText(_translate("Dialog", csvDevice.getDeviceName(), None))
deviceNameLabel.setFont(boldFont)
deviceHeader.addWidget(deviceNameLabel)
stateLed = TaurusLed(Dialog)
stateLed.setModel(csvDevice.getDeviceName() + "/state")
deviceHeader.addWidget(stateLed)
line = QtGui.QFrame(Dialog)
line.setMinimumSize(QtCore.QSize(0, 10))
line.setFrameShape(QtGui.QFrame.HLine)
line.setFrameShadow(QtGui.QFrame.Sunken)
attributeLayout.addWidget(line, attCounter, 0, 1, 3)
classLayout.addLayout(deviceHeader)
classLayout.addLayout(attributeLayout)
devCounter += 1
if devCounter > 0:
self.devicesLayout.addWidget(classHeader)
self.devicesLayout.addWidget(classWidget)
self.devicesLayout.addStretch()
#if counter == 0:
# gridLayout = QtGui.QGridLayout()
# noMatch = QtGui.QLabel(Dialog)
# noMatch.setText(_translate("Dialog", "None of the selected devices have any of the specified attributes!", None))
# gridLayout.addWidget(noMatch, 0, 0, 1, 1)
# self.formLayout.setLayout(counter, QtGui.QFormLayout.SpanningRole, gridLayout)
# Dialog.resize(500,300)
self.scrollArea.setWidget(self.scrollAreaWidgetContents)
self.gridLayout.addWidget(self.scrollArea, 0, 0, 1, 1)
self.retranslateUi(Dialog)
QtCore.QMetaObject.connectSlotsByName(Dialog)
def __init__(self, parent=None, designMode=False):
TaurusLabel.__init__(self, parent, designMode)
def setupUi(self, Form, element):
self.deviceProxy = element[0]
description = element[1]
Form.setObjectName("Form")
Form.resize(260, 104)
self.verticalLayout = QtGui.QVBoxLayout(Form)
self.verticalLayout.setSpacing(1)
self.verticalLayout.setMargin(5)
self.verticalLayout.setObjectName("verticalLayout")
########################
# HORIZONTAL 1
########################
self.horizontalLayout = QtGui.QHBoxLayout()
self.horizontalLayout.setObjectName("horizontalLayout")
# Element Name -> OpenWidgetButton (Cosywidgets)
self.ElementName = OpenWidgetButton(Form)
self.ElementName.setText(self.deviceProxy.split("/")[2] + " ")
self.horizontalLayout.addWidget(self.ElementName)
# LED for state
self.stateT = TaurusLed(Form)
self.stateT.setFixedSize(QtCore.QSize(20, 20))
self.stateT.setObjectName("stateT")
self.horizontalLayout.addWidget(self.stateT)
# Command combobox (Cosywidgets)
self.comboBox = CommandComboBox(Form)
self.comboBox.setObjectName("comboBox")
self.comboBox.setFixedHeight(20)
self.horizontalLayout.addWidget(self.comboBox)
self.comboBox.addItems(["Start", "Stop", "Init"])
self.verticalLayout.addLayout(self.horizontalLayout)
########################
# HORIZONTAL 2
########################
self.horizontalLayout_2 = QtGui.QHBoxLayout()
self.horizontalLayout_2.setObjectName("horizontalLayout_2")
# DESIRED ATTRIBUTE ...
self.pressure = QtGui.QLabel(Form)
self.pressure.setObjectName("pressure")
self.horizontalLayout_2.addWidget(self.pressure)
self.pressureT = TaurusLabel(Form)
self.pressureT.setObjectName("pressureT")
self.pressureT.setFixedWidth(180)
self.horizontalLayout_2.addWidget(self.pressureT)
self.pressureU = QtGui.QLabel(Form)
self.pressureU.setText("mBar")
self.horizontalLayout_2.addWidget(self.pressureU)
self.verticalLayout.addLayout(self.horizontalLayout_2)
########################
# HORIZONTAL 3
########################
# ...
########################
# DESCRIPTION
########################
self.descLabel = QtGui.QLabel(u'\u2022' + " " + description)
self.descLabel.setStyleSheet("background-color: lightblue; border: 1px solid grey;")
self.descLabel.setToolTip(description)
self.verticalLayout.addSpacing(2)
self.verticalLayout.addWidget(self.descLabel)
self.retranslateUi(Form)
QtCore.QMetaObject.connectSlotsByName(Form)
class PoolIORegisterButtons(TaurusWidget):
''' A widget that displays and controls a pool IORegister device.
It reads the value and provides buttons to switch between values.
NOTE: It would be nice to provide 'ABORT' button if the device allows it.
NOTE: It would be nice to set icons for each possible value label.
'''
def __init__(self, parent=None, designMode=False):
TaurusWidget.__init__(self, parent, designMode)
self.loadUi()
self.ioreg_dev = None
self.alias_label = TaurusLabel()
self.alias_label.setBgRole('state')
self.value_label = PoolIORegisterReadWidget()
self.button_value_dict = {}
policy = self.value_label.sizePolicy()
policy.setHorizontalPolicy(Qt.QSizePolicy.Expanding)
self.value_label.setSizePolicy(policy)
self.ui.lo_state_read.addWidget(self.alias_label)
self.ui.lo_state_read.addWidget(self.value_label)
def setModel(self, model):
try:
self.ioreg_dev = taurus.Device(model)
except:
return
self.alias_label.setModel('%s/State?configuration=dev_alias' % model)
self.value_label.setModel(model)
# Empty previous buttons
#self.ui.lo_buttons_write.
for button in self.button_value_dict.keys():
self.disconnect(button, Qt.SIGNAL('clicked'), self.writeValue)
button.deleteLater()
self.button_value_dict = {}
labels = self.ioreg_dev.getAttribute('Labels').read().value
labels_list = labels.split(' ')
# Update the mapping
for label_and_value in labels_list:
label, value = label_and_value.split(':')
button = Qt.QPushButton(label)
self.button_value_dict[button] = value
self.ui.lo_buttons_write.addWidget(button)
self.connect(button, Qt.SIGNAL('clicked()'), self.writeValue)
def writeValue(self):
if self.ioreg_dev is None:
return
button = self.sender()
value = self.button_value_dict[button]
self.ioreg_dev.getAttribute('Value').write(value)
def showEvent(self, event):
TaurusWidget.showEvent(self, event)
if self.ioreg_dev is not None:
self.ioreg_dev.getAttribute('Value').enablePolling(force=True)
def hideEvent(self, event):
TaurusWidget.hideEvent(self, event)
if self.ioreg_dev is not None:
self.ioreg_dev.getAttribute('Value').disablePolling()
def setupUi(self, Form):
Form.setObjectName(_fromUtf8("Form"))
Form.resize(501, 414)
self.gridLayout_2 = QtGui.QGridLayout(Form)
self.gridLayout_2.setObjectName(_fromUtf8("gridLayout_2"))
self.groupBox = QtGui.QGroupBox(Form)
self.groupBox.setObjectName(_fromUtf8("groupBox"))
self.gridLayout = QtGui.QGridLayout(self.groupBox)
self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
self.taurusLabel = TaurusLabel(self.groupBox)
self.taurusLabel.setObjectName(_fromUtf8("taurusLabel"))
self.gridLayout.addWidget(self.taurusLabel, 0, 0, 1, 1)
self.taurusLabel_2 = TaurusLabel(self.groupBox)
self.taurusLabel_2.setObjectName(_fromUtf8("taurusLabel_2"))
self.gridLayout.addWidget(self.taurusLabel_2, 0, 2, 1, 1)
self.taurusLed_2 = TaurusLed(self.groupBox)
self.taurusLed_2.setObjectName(_fromUtf8("taurusLed_2"))
self.gridLayout.addWidget(self.taurusLed_2, 0, 3, 1, 1)
self.taurusLabel_3 = TaurusLabel(self.groupBox)
self.taurusLabel_3.setObjectName(_fromUtf8("taurusLabel_3"))
self.gridLayout.addWidget(self.taurusLabel_3, 1, 0, 1, 1)
self.taurusLabel_4 = TaurusLabel(self.groupBox)
self.taurusLabel_4.setObjectName(_fromUtf8("taurusLabel_4"))
self.gridLayout.addWidget(self.taurusLabel_4, 1, 2, 1, 1)
self.taurusLed_3 = TaurusLed(self.groupBox)
self.taurusLed_3.setObjectName(_fromUtf8("taurusLed_3"))
self.gridLayout.addWidget(self.taurusLed_3, 1, 3, 1, 1)
self.taurusLabel_5 = TaurusLabel(self.groupBox)
self.taurusLabel_5.setObjectName(_fromUtf8("taurusLabel_5"))
self.gridLayout.addWidget(self.taurusLabel_5, 2, 0, 1, 1)
self.taurusLabel_6 = TaurusLabel(self.groupBox)
self.taurusLabel_6.setObjectName(_fromUtf8("taurusLabel_6"))
self.gridLayout.addWidget(self.taurusLabel_6, 2, 2, 1, 1)
self.taurusLed_4 = TaurusLed(self.groupBox)
self.taurusLed_4.setObjectName(_fromUtf8("taurusLed_4"))
self.gridLayout.addWidget(self.taurusLed_4, 2, 3, 1, 1)
self.taurusLabel_7 = TaurusLabel(self.groupBox)
self.taurusLabel_7.setObjectName(_fromUtf8("taurusLabel_7"))
self.gridLayout.addWidget(self.taurusLabel_7, 3, 0, 1, 1)
self.taurusLabel_8 = TaurusLabel(self.groupBox)
self.taurusLabel_8.setObjectName(_fromUtf8("taurusLabel_8"))
self.gridLayout.addWidget(self.taurusLabel_8, 3, 2, 1, 1)
self.taurusLed_5 = TaurusLed(self.groupBox)
self.taurusLed_5.setObjectName(_fromUtf8("taurusLed_5"))
self.gridLayout.addWidget(self.taurusLed_5, 3, 3, 1, 1)
self.taurusLabel_9 = TaurusLabel(self.groupBox)
self.taurusLabel_9.setObjectName(_fromUtf8("taurusLabel_9"))
self.gridLayout.addWidget(self.taurusLabel_9, 4, 0, 1, 1)
self.taurusLabel_10 = TaurusLabel(self.groupBox)
self.taurusLabel_10.setObjectName(_fromUtf8("taurusLabel_10"))
self.gridLayout.addWidget(self.taurusLabel_10, 4, 2, 1, 1)
self.taurusLed_6 = TaurusLed(self.groupBox)
self.taurusLed_6.setObjectName(_fromUtf8("taurusLed_6"))
self.gridLayout.addWidget(self.taurusLed_6, 4, 3, 1, 1)
self.taurusLabel_11 = TaurusLabel(self.groupBox)
self.taurusLabel_11.setObjectName(_fromUtf8("taurusLabel_11"))
self.gridLayout.addWidget(self.taurusLabel_11, 5, 0, 1, 1)
self.taurusLabel_12 = TaurusLabel(self.groupBox)
self.taurusLabel_12.setObjectName(_fromUtf8("taurusLabel_12"))
self.gridLayout.addWidget(self.taurusLabel_12, 5, 2, 1, 1)
self.taurusLed_7 = TaurusLed(self.groupBox)
self.taurusLed_7.setObjectName(_fromUtf8("taurusLed_7"))
self.gridLayout.addWidget(self.taurusLed_7, 5, 3, 1, 1)
self.gridLayout_2.addWidget(self.groupBox, 0, 2, 1, 1)
self.groupBox_2 = QtGui.QGroupBox(Form)
self.groupBox_2.setObjectName(_fromUtf8("groupBox_2"))
self.gridLayout_3 = QtGui.QGridLayout(self.groupBox_2)
self.gridLayout_3.setObjectName(_fromUtf8("gridLayout_3"))
self.taurusLabel_13 = TaurusLabel(self.groupBox_2)
self.taurusLabel_13.setObjectName(_fromUtf8("taurusLabel_13"))
self.gridLayout_3.addWidget(self.taurusLabel_13, 0, 0, 1, 1)
self.taurusLabel_14 = TaurusLabel(self.groupBox_2)
self.taurusLabel_14.setObjectName(_fromUtf8("taurusLabel_14"))
self.gridLayout_3.addWidget(self.taurusLabel_14, 0, 2, 1, 1)
self.taurusLed_8 = TaurusLed(self.groupBox_2)
self.taurusLed_8.setObjectName(_fromUtf8("taurusLed_8"))
self.gridLayout_3.addWidget(self.taurusLed_8, 0, 3, 1, 1)
self.taurusLabel_15 = TaurusLabel(self.groupBox_2)
self.taurusLabel_15.setObjectName(_fromUtf8("taurusLabel_15"))
self.gridLayout_3.addWidget(self.taurusLabel_15, 1, 0, 1, 1)
self.taurusLabel_16 = TaurusLabel(self.groupBox_2)
self.taurusLabel_16.setObjectName(_fromUtf8("taurusLabel_16"))
self.gridLayout_3.addWidget(self.taurusLabel_16, 1, 2, 1, 1)
self.taurusLed_9 = TaurusLed(self.groupBox_2)
self.taurusLed_9.setObjectName(_fromUtf8("taurusLed_9"))
self.gridLayout_3.addWidget(self.taurusLed_9, 1, 3, 1, 1)
self.taurusLabel_17 = TaurusLabel(self.groupBox_2)
self.taurusLabel_17.setObjectName(_fromUtf8("taurusLabel_17"))
self.gridLayout_3.addWidget(self.taurusLabel_17, 2, 0, 1, 1)
self.taurusLabel_18 = TaurusLabel(self.groupBox_2)
self.taurusLabel_18.setObjectName(_fromUtf8("taurusLabel_18"))
self.gridLayout_3.addWidget(self.taurusLabel_18, 2, 2, 1, 1)
self.taurusLed_10 = TaurusLed(self.groupBox_2)
self.taurusLed_10.setObjectName(_fromUtf8("taurusLed_10"))
self.gridLayout_3.addWidget(self.taurusLed_10, 2, 3, 1, 1)
self.taurusLabel_19 = TaurusLabel(self.groupBox_2)
self.taurusLabel_19.setObjectName(_fromUtf8("taurusLabel_19"))
self.gridLayout_3.addWidget(self.taurusLabel_19, 3, 0, 1, 1)
self.taurusLabel_20 = TaurusLabel(self.groupBox_2)
self.taurusLabel_20.setObjectName(_fromUtf8("taurusLabel_20"))
self.gridLayout_3.addWidget(self.taurusLabel_20, 3, 2, 1, 1)
self.taurusLed_11 = TaurusLed(self.groupBox_2)
self.taurusLed_11.setObjectName(_fromUtf8("taurusLed_11"))
self.gridLayout_3.addWidget(self.taurusLed_11, 3, 3, 1, 1)
self.taurusLabel_21 = TaurusLabel(self.groupBox_2)
self.taurusLabel_21.setObjectName(_fromUtf8("taurusLabel_21"))
self.gridLayout_3.addWidget(self.taurusLabel_21, 4, 0, 1, 1)
self.taurusLabel_22 = TaurusLabel(self.groupBox_2)
self.taurusLabel_22.setObjectName(_fromUtf8("taurusLabel_22"))
self.gridLayout_3.addWidget(self.taurusLabel_22, 4, 2, 1, 1)
self.taurusLed_12 = TaurusLed(self.groupBox_2)
self.taurusLed_12.setObjectName(_fromUtf8("taurusLed_12"))
self.gridLayout_3.addWidget(self.taurusLed_12, 4, 3, 1, 1)
self.taurusLabel_23 = TaurusLabel(self.groupBox_2)
self.taurusLabel_23.setObjectName(_fromUtf8("taurusLabel_23"))
self.gridLayout_3.addWidget(self.taurusLabel_23, 5, 0, 1, 1)
self.taurusLabel_24 = TaurusLabel(self.groupBox_2)
self.taurusLabel_24.setObjectName(_fromUtf8("taurusLabel_24"))
self.gridLayout_3.addWidget(self.taurusLabel_24, 5, 2, 1, 1)
self.taurusLed_13 = TaurusLed(self.groupBox_2)
self.taurusLed_13.setObjectName(_fromUtf8("taurusLed_13"))
self.gridLayout_3.addWidget(self.taurusLed_13, 5, 3, 1, 1)
self.gridLayout_2.addWidget(self.groupBox_2, 0, 3, 1, 1)
self.groupBox_4 = QtGui.QGroupBox(Form)
self.groupBox_4.setObjectName(_fromUtf8("groupBox_4"))
self.gridLayout_5 = QtGui.QGridLayout(self.groupBox_4)
self.gridLayout_5.setObjectName(_fromUtf8("gridLayout_5"))
self.taurusLabel_26 = TaurusLabel(self.groupBox_4)
self.taurusLabel_26.setObjectName(_fromUtf8("taurusLabel_26"))
self.gridLayout_5.addWidget(self.taurusLabel_26, 0, 0, 1, 3)
self.taurusLed_14 = TaurusLed(self.groupBox_4)
self.taurusLed_14.setObjectName(_fromUtf8("taurusLed_14"))
self.gridLayout_5.addWidget(self.taurusLed_14, 1, 0, 1, 1)
self.taurusLabel_29 = TaurusLabel(self.groupBox_4)
self.taurusLabel_29.setObjectName(_fromUtf8("taurusLabel_29"))
self.gridLayout_5.addWidget(self.taurusLabel_29, 2, 0, 1, 1)
self.taurusLabel_30 = TaurusLabel(self.groupBox_4)
self.taurusLabel_30.setObjectName(_fromUtf8("taurusLabel_30"))
self.gridLayout_5.addWidget(self.taurusLabel_30, 2, 1, 1, 1)
self.taurusValueLineEdit_2 = TaurusValueLineEdit(self.groupBox_4)
self.taurusValueLineEdit_2.setObjectName(
_fromUtf8("taurusValueLineEdit_2"))
self.gridLayout_5.addWidget(self.taurusValueLineEdit_2, 2, 2, 1, 1)
self.taurusLabel_33 = TaurusLabel(self.groupBox_4)
self.taurusLabel_33.setObjectName(_fromUtf8("taurusLabel_33"))
self.gridLayout_5.addWidget(self.taurusLabel_33, 3, 0, 1, 1)
self.taurusLabel_34 = TaurusLabel(self.groupBox_4)
self.taurusLabel_34.setObjectName(_fromUtf8("taurusLabel_34"))
self.gridLayout_5.addWidget(self.taurusLabel_34, 3, 1, 1, 1)
self.taurusValueLineEdit_4 = TaurusValueLineEdit(self.groupBox_4)
self.taurusValueLineEdit_4.setObjectName(
_fromUtf8("taurusValueLineEdit_4"))
self.gridLayout_5.addWidget(self.taurusValueLineEdit_4, 3, 2, 1, 1)
self.taurusLabel_37 = TaurusLabel(self.groupBox_4)
self.taurusLabel_37.setObjectName(_fromUtf8("taurusLabel_37"))
self.gridLayout_5.addWidget(self.taurusLabel_37, 4, 0, 1, 1)
self.taurusLabel_38 = TaurusLabel(self.groupBox_4)
self.taurusLabel_38.setObjectName(_fromUtf8("taurusLabel_38"))
self.gridLayout_5.addWidget(self.taurusLabel_38, 4, 1, 1, 1)
self.taurusValueLineEdit_6 = TaurusValueLineEdit(self.groupBox_4)
self.taurusValueLineEdit_6.setObjectName(
_fromUtf8("taurusValueLineEdit_6"))
self.gridLayout_5.addWidget(self.taurusValueLineEdit_6, 4, 2, 1, 1)
self.horizontalLayout_2 = QtGui.QHBoxLayout()
self.horizontalLayout_2.setObjectName(_fromUtf8("horizontalLayout_2"))
self.taurusCommandButton_2 = TaurusCommandButton(self.groupBox_4)
self.taurusCommandButton_2.setObjectName(
_fromUtf8("taurusCommandButton_2"))
self.horizontalLayout_2.addWidget(self.taurusCommandButton_2)
self.cfgMg2 = QtGui.QToolButton(self.groupBox_4)
self.cfgMg2.setObjectName(_fromUtf8("cfgMg2"))
self.horizontalLayout_2.addWidget(self.cfgMg2)
self.horizontalLayout_2.setStretch(0, 1)
self.gridLayout_5.addLayout(self.horizontalLayout_2, 1, 1, 1, 2)
self.gridLayout_2.addWidget(self.groupBox_4, 1, 3, 1, 1)
self.groupBox_3 = QtGui.QGroupBox(Form)
self.groupBox_3.setObjectName(_fromUtf8("groupBox_3"))
self.gridLayout_4 = QtGui.QGridLayout(self.groupBox_3)
self.gridLayout_4.setObjectName(_fromUtf8("gridLayout_4"))
self.taurusLabel_25 = TaurusLabel(self.groupBox_3)
self.taurusLabel_25.setObjectName(_fromUtf8("taurusLabel_25"))
self.gridLayout_4.addWidget(self.taurusLabel_25, 0, 0, 1, 3)
self.taurusLabel_27 = TaurusLabel(self.groupBox_3)
self.taurusLabel_27.setObjectName(_fromUtf8("taurusLabel_27"))
self.gridLayout_4.addWidget(self.taurusLabel_27, 2, 1, 1, 1)
self.taurusLabel_28 = TaurusLabel(self.groupBox_3)
self.taurusLabel_28.setObjectName(_fromUtf8("taurusLabel_28"))
self.gridLayout_4.addWidget(self.taurusLabel_28, 2, 0, 1, 1)
self.taurusValueLineEdit = TaurusValueLineEdit(self.groupBox_3)
self.taurusValueLineEdit.setObjectName(
_fromUtf8("taurusValueLineEdit"))
self.gridLayout_4.addWidget(self.taurusValueLineEdit, 2, 2, 1, 1)
self.taurusLed = TaurusLed(self.groupBox_3)
self.taurusLed.setObjectName(_fromUtf8("taurusLed"))
self.gridLayout_4.addWidget(self.taurusLed, 1, 0, 1, 1)
self.taurusLabel_31 = TaurusLabel(self.groupBox_3)
self.taurusLabel_31.setObjectName(_fromUtf8("taurusLabel_31"))
self.gridLayout_4.addWidget(self.taurusLabel_31, 3, 0, 1, 1)
self.taurusLabel_32 = TaurusLabel(self.groupBox_3)
self.taurusLabel_32.setObjectName(_fromUtf8("taurusLabel_32"))
self.gridLayout_4.addWidget(self.taurusLabel_32, 3, 1, 1, 1)
self.taurusValueLineEdit_3 = TaurusValueLineEdit(self.groupBox_3)
self.taurusValueLineEdit_3.setObjectName(
_fromUtf8("taurusValueLineEdit_3"))
self.gridLayout_4.addWidget(self.taurusValueLineEdit_3, 3, 2, 1, 1)
self.taurusLabel_35 = TaurusLabel(self.groupBox_3)
self.taurusLabel_35.setObjectName(_fromUtf8("taurusLabel_35"))
self.gridLayout_4.addWidget(self.taurusLabel_35, 4, 0, 1, 1)
self.taurusLabel_36 = TaurusLabel(self.groupBox_3)
self.taurusLabel_36.setObjectName(_fromUtf8("taurusLabel_36"))
self.gridLayout_4.addWidget(self.taurusLabel_36, 4, 1, 1, 1)
self.taurusValueLineEdit_5 = TaurusValueLineEdit(self.groupBox_3)
self.taurusValueLineEdit_5.setObjectName(
_fromUtf8("taurusValueLineEdit_5"))
self.gridLayout_4.addWidget(self.taurusValueLineEdit_5, 4, 2, 1, 1)
self.horizontalLayout_3 = QtGui.QHBoxLayout()
self.horizontalLayout_3.setObjectName(_fromUtf8("horizontalLayout_3"))
self.taurusCommandButton = TaurusCommandButton(self.groupBox_3)
self.taurusCommandButton.setObjectName(
_fromUtf8("taurusCommandButton"))
self.horizontalLayout_3.addWidget(self.taurusCommandButton)
self.cfgMg1 = QtGui.QToolButton(self.groupBox_3)
self.cfgMg1.setObjectName(_fromUtf8("cfgMg1"))
self.horizontalLayout_3.addWidget(self.cfgMg1)
self.gridLayout_4.addLayout(self.horizontalLayout_3, 1, 1, 1, 2)
self.gridLayout_2.addWidget(self.groupBox_3, 1, 2, 1, 1)
self.retranslateUi(Form)
QtCore.QMetaObject.connectSlotsByName(Form)
import sys
from taurus.external.qt import Qt
from taurus.qt.qtgui.container import TaurusWidget
from taurus.qt.qtgui.display import TaurusLabel
app = Qt.QApplication(sys.argv)
panel = TaurusWidget()
layout = Qt.QVBoxLayout()
panel.setLayout(layout)
panel.setModel('sys/taurustest/1')
w1 = TaurusLabel()
w2 = TaurusLabel()
w3 = TaurusLabel()
w1.setUseParentModel(True)
w2.setUseParentModel(True)
w3.setUseParentModel(True)
w1.setModel('/state')
w2.setModel('/position')
w3.setModel('/simulationmode')
w1.setShowQuality(False)
layout.addWidget(w1)
layout.addWidget(w2)
layout.addWidget(w3)
panel.show()
sys.exit(app.exec_())
def __init__(self, parent=None, designMode=False):
TaurusLabel.__init__(self, parent, designMode)
import sys from taurus.external.qt import Qt from taurus.qt.qtgui.application import TaurusApplication app = TaurusApplication(sys.argv) panel = Qt.QWidget() layout = Qt.QHBoxLayout() panel.setLayout(layout) from taurus.qt.qtgui.display import TaurusLabel from taurus.qt.qtgui.input import TaurusValueLineEdit, TaurusValueSpinBox, TaurusWheelEdit w1 = TaurusLabel() w2 = TaurusLabel() w3 = TaurusValueLineEdit() # or TaurusValueSpinBox or TaurusWheelEdit w4 = TaurusLabel() layout.addWidget(w1) layout.addWidget(w2) layout.addWidget(w3) layout.addWidget(w4) w1.model, w1.bgRole = 'sys/tg_test/1/double_scalar#label', '' w2.model = 'sys/tg_test/1/double_scalar' w3.model = 'sys/tg_test/1/double_scalar' w4.model, w4.bgRole = 'sys/tg_test/1/double_scalar#unit', '' panel.show() sys.exit(app.exec_())
import sys
from taurus.external.qt import Qt
from taurus.qt.qtgui.container import TaurusWidget
from taurus.qt.qtgui.display import TaurusLabel
from taurus.qt.qtgui.input import TaurusValueSpinBox
app = Qt.QApplication(sys.argv)
panel = TaurusWidget()
layout = Qt.QHBoxLayout()
panel.setLayout(layout)
w1 = TaurusLabel()
w2 = TaurusLabel()
w3 = TaurusValueSpinBox()
w4 = TaurusLabel()
layout.addWidget(w1)
layout.addWidget(w2)
layout.addWidget(w3)
layout.addWidget(w4)
w1.setUseParentModel(True)
w2.setUseParentModel(True)
w3.setUseParentModel(True)
w4.setUseParentModel(True)
panel.setModel('sys/taurustest/1')
w1.setModel('/position#label')
w2.setModel('/position')
w3.setModel('/position')
w4.setModel('/position#unit')
panel.show()
import sys from taurus.external.qt import Qt from taurus.qt.qtgui.application import TaurusApplication app = TaurusApplication(sys.argv) panel = Qt.QWidget() layout = Qt.QHBoxLayout() panel.setLayout(layout) from taurus.qt.qtgui.display import TaurusLabel w1 = TaurusLabel() w2 = TaurusLabel() layout.addWidget(w1) layout.addWidget(w2) w1.model = 'sys/tg_test/1/double_scalar#label' w1.bgRole = '' w2.model = 'sys/tg_test/1/double_scalar' panel.show() sys.exit(app.exec_())
def __init__(self, parent=None, model=None, palette=None, bound=True):
TaurusWidget.__init__(self, parent)
if palette:
self.setPalette(palette)
self.setLayout(Qt.QGridLayout())
self.bound = bound
self._dups = []
self.setWindowTitle('TaurusDevicePanel')
self._label = Qt.QLabel()
self._label.font().setBold(True)
self._stateframe = TaurusWidget(self)
self._stateframe.setLayout(Qt.QGridLayout())
self._stateframe.layout().addWidget(Qt.QLabel('State'), 0, 0, Qt.Qt.AlignCenter)
self._statelabel = TaurusLabel(self._stateframe)
self._statelabel.setMinimumWidth(100)
self._statelabel.setBgRole('state')
self._stateframe.layout().addWidget(self._statelabel, 0, 1, Qt.Qt.AlignCenter)
self._state = TaurusLed(self._stateframe)
self._state.setShowQuality(False)
self._stateframe.layout().addWidget(self._state, 0, 2, Qt.Qt.AlignCenter)
self._statusframe = Qt.QScrollArea(self)
self._status = TaurusLabel(self._statusframe)
self._status.setBgRole('none')
self._status.setAlignment(Qt.Qt.AlignLeft)
self._status.setFixedHeight(2000)
self._status.setFixedWidth(5000)
# self._statusframe.setFixedHeight(STATUS_HEIGHT)
self._statusframe.setHorizontalScrollBarPolicy(Qt.Qt.ScrollBarAlwaysOn)
self._statusframe.setVerticalScrollBarPolicy(Qt.Qt.ScrollBarAlwaysOn)
self._statusframe.setWidget(self._status)
self._statusframe.setPalette(get_White_palette())
self._attrsframe = Qt.QTabWidget(self)
# Horizontal will not allow to show labels of attributes!
self._splitter = Qt.QSplitter(Qt.Qt.Vertical, self)
self._attrs, self._comms = None, None
self.layout().addWidget(self._splitter, 0, 0)
self._header = Qt.QFrame()
self._header.setFixedHeight(1.1 * IMAGE_SIZE[1])
self._header.setLayout(Qt.QGridLayout())
self._dup = Qt.QPushButton()
qpixmap = Qt.QIcon("actions:window-new.svg")
self._dup.setIcon(Qt.QIcon(qpixmap))
self._dup.setIconSize(Qt.QSize(15, 15))
self._dup.pressed.connect(self.duplicate)
self._image = Qt.QLabel()
self._header.layout().addWidget(self._image, 0, 0, 2, 1, Qt.Qt.AlignCenter)
self._header.layout().addWidget(self._label, 0, 1, Qt.Qt.AlignLeft)
self._header.layout().addWidget(self._stateframe, 1, 1, 1, 2, Qt.Qt.AlignLeft)
self._header.layout().addWidget(self._dup, 0, 2, Qt.Qt.AlignRight)
self._splitter.insertWidget(0, self._header)
self._splitter.insertWidget(1, self._attrsframe)
self._splitter.insertWidget(2, self._statusframe)
self._splitter.setSizes(SPLIT_SIZES)
[self._splitter.setStretchFactor(i, v)
for i, v in enumerate(SPLIT_SIZES)]
self._splitter.setCollapsible(0, False)
self._splitter.setCollapsible(1, False)
if model:
self.setModel(model)
import sys
from taurus.external.qt import Qt
from taurus.qt.qtgui.container import TaurusWidget
from taurus.qt.qtgui.display import TaurusLabel
from taurus.qt.qtgui.application import TaurusApplication
app = TaurusApplication(sys.argv)
panel = TaurusWidget()
layout = Qt.QVBoxLayout()
panel.setLayout(layout)
panel.setModel('sys/taurustest/1')
w1 = TaurusLabel()
w2 = TaurusLabel()
w3 = TaurusLabel()
w1.setModel('sys/taurustest/1/state')
w2.setModel('sys/taurustest/1/position')
w3.setModel('sys/taurustest/1/simulationmode')
w1.setShowQuality(False)
layout.addWidget(w1)
layout.addWidget(w2)
layout.addWidget(w3)
panel.show()
sys.exit(app.exec_())
class TaurusDevicePanel(TaurusWidget):
'''
TaurusDevPanel is a Taurus Application inspired in Jive and Atk Panel.
It Provides a Device selector and a panel for displaying information from
the selected device.
'''
# TODO: Tango-centric (This whole class should be called TangoDevicePanel)
# TODO: a scheme-agnostic base class should be implemented
READ_ONLY = False
# A dictionary like {device_regexp:[attribute_regexps]}
_attribute_filter = {}
# A dictionary like {device_regexp:[(command_regexp,default_args)]}
_command_filter = {}
_icon_map = {} # A dictionary like {device_regexp:pixmap_url}
@classmethod
def setIconMap(klass, filters):
"""A dictionary like {device_regexp:pixmap_url}"""
klass._icon_map = filters
@classmethod
def getIconMap(klass):
return klass._icon_map
@classmethod
def setAttributeFilters(klass, filters):
"""
It will set the attribute filters
filters will be like: {device_regexp:[attribute_regexps]}
example: {'.*/VGCT-.*': ['ChannelState','p[0-9]']}
"""
klass._attribute_filter.update(filters)
@classmethod
def getAttributeFilters(klass):
return klass._attribute_filter
@classmethod
def setCommandFilters(klass, filters):
"""
It will set the command filters
filters will be like: {device_regexp:[command_regexps]}
example::
{'.*/IPCT-.*': (
('setmode',('SERIAL','LOCAL','STEP','FIXED','START','PROTECT')),
('onhv1',()), ('offhv1',()), ('onhv2',()), ('offhv2',()),
('sendcommand',())
),}
"""
klass._command_filter.update(filters)
@classmethod
def getCommandFilters(klass):
return klass._command_filter
###########################################################################
def __init__(self, parent=None, model=None, palette=None, bound=True):
TaurusWidget.__init__(self, parent)
if palette:
self.setPalette(palette)
self.setLayout(Qt.QGridLayout())
self.bound = bound
self._dups = []
self.setWindowTitle('TaurusDevicePanel')
self._label = Qt.QLabel()
self._label.font().setBold(True)
self._stateframe = TaurusWidget(self)
self._stateframe.setLayout(Qt.QGridLayout())
self._stateframe.layout().addWidget(Qt.QLabel('State'), 0, 0,
Qt.Qt.AlignCenter)
self._statelabel = TaurusLabel(self._stateframe)
self._statelabel.setMinimumWidth(100)
self._statelabel.setBgRole('value')
self._stateframe.layout().addWidget(self._statelabel, 0, 1,
Qt.Qt.AlignCenter)
self._statusframe = Qt.QScrollArea(self)
self._status = TaurusLabel(self._statusframe)
self._status.setBgRole('none')
self._status.setAlignment(Qt.Qt.AlignLeft)
self._status.setFixedHeight(2000)
self._status.setFixedWidth(5000)
# self._statusframe.setFixedHeight(STATUS_HEIGHT)
self._statusframe.setHorizontalScrollBarPolicy(Qt.Qt.ScrollBarAlwaysOn)
self._statusframe.setVerticalScrollBarPolicy(Qt.Qt.ScrollBarAlwaysOn)
self._statusframe.setWidget(self._status)
self._statusframe.setPalette(get_White_palette())
self._attrsframe = Qt.QTabWidget(self)
# Horizontal will not allow to show labels of attributes!
self._splitter = Qt.QSplitter(Qt.Qt.Vertical, self)
self._attrs, self._comms = None, None
self.layout().addWidget(self._splitter, 0, 0)
self._header = Qt.QFrame()
self._header.setFixedHeight(1.1 * IMAGE_SIZE[1])
self._header.setLayout(Qt.QGridLayout())
self._dup = Qt.QPushButton()
qpixmap = Qt.QIcon("actions:window-new.svg")
self._dup.setIcon(Qt.QIcon(qpixmap))
self._dup.setIconSize(Qt.QSize(15, 15))
self._dup.pressed.connect(self.duplicate)
self._image = Qt.QLabel()
self._header.layout().addWidget(self._image, 0, 0, 2, 1,
Qt.Qt.AlignCenter)
self._header.layout().addWidget(self._label, 0, 1, Qt.Qt.AlignLeft)
self._header.layout().addWidget(self._stateframe, 1, 1, 1, 2,
Qt.Qt.AlignLeft)
self._header.layout().addWidget(self._dup, 0, 2, Qt.Qt.AlignRight)
self._splitter.insertWidget(0, self._header)
self._splitter.insertWidget(1, self._attrsframe)
self._splitter.insertWidget(2, self._statusframe)
self._splitter.setSizes(SPLIT_SIZES)
[
self._splitter.setStretchFactor(i, v)
for i, v in enumerate(SPLIT_SIZES)
]
self._splitter.setCollapsible(0, False)
self._splitter.setCollapsible(1, False)
if model:
self.setModel(model)
def loadConfigFile(self, ifile=None):
self.info('In TaurusDevicePanel.loadConfigFile(%s)' % ifile)
if isinstance(
ifile,
file) or isinstance(ifile, str) and not ifile.endswith('.py'):
TaurusWidget.loadConfigFile(self, ifile)
else:
from imp import load_source
config_file = load_source('config_file', ifile)
af, cf, im = [
getattr(config_file, x, None)
for x in ('AttributeFilters', 'CommandFilters', 'IconMap')
]
if af is not None:
self.setAttributeFilters(af)
if cf is not None:
self.setCommandFilters(cf)
if im is not None:
self.setIconMap(im)
self.debug('AttributeFilters are:\n%s' % self.getAttributeFilters())
def duplicate(self):
self._dups.append(TaurusDevicePanel(bound=False))
self._dups[-1].setModel(self.getModel())
self._dups[-1].show()
@Qt.pyqtSlot('QString')
def setModel(self, model, pixmap=None):
model, modelclass, raw = str(model).strip(), '', model
if model:
model = model and model.split()[0] or ''
modelclass = taurus.Factory().findObjectClass(model)
self.trace('In TaurusDevicePanel.setModel(%s(%s),%s)' %
(raw, modelclass, pixmap))
if model == self.getModel():
return
elif raw is None or not model or not modelclass:
if self.getModel():
self.detach()
return
elif issubclass(modelclass, TaurusAttribute):
# if model.lower().endswith('/state'):
model = model.rsplit('/', 1)[0] # TODO: Tango-centric
elif not issubclass(modelclass, TaurusDevice):
self.warning('TaurusDevicePanel accepts only Device models')
return
try:
taurus.Device(model).ping() # TODO: Tango-centric
if self.getModel():
self.detach(
) # Do not dettach previous model before pinging the new one (fail message will be shown at except: clause)
TaurusWidget.setModel(self, model)
self.setWindowTitle(str(model).upper())
model = self.getModel()
self._label.setText(model.upper())
font = self._label.font()
font.setPointSize(15)
self._label.setFont(font)
if pixmap is None and self.getIconMap():
for k, v in self.getIconMap().items():
if searchCl(k, model):
pixmap = v
if pixmap is not None:
# print 'Pixmap is %s'%pixmap
qpixmap = Qt.QPixmap(pixmap)
if qpixmap.height() > .9 * IMAGE_SIZE[1]:
qpixmap = qpixmap.scaledToHeight(.9 * IMAGE_SIZE[1])
if qpixmap.width() > .9 * IMAGE_SIZE[0]:
qpixmap = qpixmap.scaledToWidth(.9 * IMAGE_SIZE[0])
else:
logo = getattr(tauruscustomsettings, 'ORGANIZATION_LOGO',
"logos:taurus.png")
qpixmap = getCachedPixmap(logo)
self._image.setPixmap(qpixmap)
if hasattr(self, '_statelabel'):
self._statelabel.setModel(model +
'/state') # TODO: Tango-centric
self._status.setModel(model + '/status') # TODO: Tango-centric
try:
self._attrsframe.clear()
filters = get_regexp_dict(TaurusDevicePanel._attribute_filter,
model, ['.*'])
if hasattr(filters, 'keys'):
filters = filters.items() # Dictionary!
if filters and isinstance(filters[0],
(list, tuple)): # Mapping
self._attrs = []
for tab, attrs in filters:
self._attrs.append(
self.get_attrs_form(device=model,
filters=attrs,
parent=self))
self._attrsframe.addTab(self._attrs[-1], tab)
else:
if self._attrs and isinstance(self._attrs, list):
self._attrs = self._attrs[0]
self._attrs = self.get_attrs_form(device=model,
form=self._attrs,
filters=filters,
parent=self)
if self._attrs:
self._attrsframe.addTab(self._attrs, 'Attributes')
if not TaurusDevicePanel.READ_ONLY:
self._comms = self.get_comms_form(model, self._comms, self)
if self._comms:
self._attrsframe.addTab(self._comms, 'Commands')
if SPLIT_SIZES:
self._splitter.setSizes(SPLIT_SIZES)
except:
self.warning(traceback.format_exc())
qmsg = Qt.QMessageBox(Qt.QMessageBox.Critical,
'%s Error' % model,
'%s not available' % model,
Qt.QMessageBox.Ok, self)
qmsg.setDetailedText(traceback.format_exc())
qmsg.show()
except:
self.warning(traceback.format_exc())
qmsg = Qt.QMessageBox(Qt.QMessageBox.Critical, '%s Error' % model,
'%s not available' % model,
Qt.QMessageBox.Ok, self)
qmsg.show()
self.setWindowTitle(self.getModel())
return
def detach(self):
self.trace('In TaurusDevicePanel(%s).detach()' % self.getModel())
_detached = []
# long imports to avoid comparison problems in the isinstance below
import taurus.qt.qtgui.container
import taurus.qt.qtgui.base
def detach_recursive(obj):
if obj in _detached:
return
if isinstance(obj, taurus.qt.qtgui.container.TaurusBaseContainer):
for t in obj.taurusChildren():
detach_recursive(t)
if obj is not self and isinstance(
obj, taurus.qt.qtgui.base.TaurusBaseWidget):
try:
if getattr(obj, 'model', None):
#self.debug('detaching %s from %s'%(obj,obj.model))
obj.setModel([] if isinstance(obj, TaurusForm) else '')
except:
self.warning('detach of %s failed!' % obj)
self.warning(traceback.format_exc())
_detached.append(obj)
detach_recursive(self)
try:
self._label.setText('')
if hasattr(self, '_statelabel'):
self._statelabel.setModel('')
self._status.setModel('')
self._image.setPixmap(Qt.QPixmap())
except:
self.warning(traceback.format_exc())
def get_attrs_form(self, device, form=None, filters=None, parent=None):
filters = filters or get_regexp_dict(
TaurusDevicePanel._attribute_filter, device, ['.*'])
self.trace('In TaurusDevicePanel.get_attrs_form(%s,%s)' %
(device, filters))
allattrs = sorted(
str(a) for a in taurus.Device(device).get_attribute_list()
if str(a).lower() not in ('state', 'status'))
attrs = []
for a in filters:
for t in allattrs:
if a and searchCl(a.strip(), t.strip()):
aname = '%s/%s' % (device, t)
if aname not in attrs:
attrs.append(aname)
if attrs:
#self.trace( 'Matching attributes are: %s' % str(attrs)[:100])
if form is None:
form = TaurusForm(parent)
elif hasattr(form, 'setModel'):
form.setModel([])
# Configuring the TauForm:
form.setWithButtons(False)
form.setWindowTitle(device)
try:
form.setModel(attrs)
except Exception:
self.warning(
'TaurusDevicePanel.ERROR: Unable to setModel for TaurusDevicePanel.attrs_form!!: %s'
% traceback.format_exc())
return form
else:
return None
def get_comms_form(self, device, form=None, parent=None):
self.trace('In TaurusDevicePanel.get_comms_form(%s)' % device)
params = get_regexp_dict(TaurusDevicePanel._command_filter, device, [])
# If filters are defined only listed devices will show commands
if TaurusDevicePanel._command_filter and not params:
self.debug(
'TaurusDevicePanel.get_comms_form(%s): By default an unknown device type will display no commands'
% device)
return None
if not form:
form = TaurusCommandsForm(parent)
elif hasattr(form, 'setModel'):
form.setModel('')
try:
form.setModel(device)
if params:
form.setSortKey(lambda x, vals=[s[0].lower() for s in params]:
vals.index(x.cmd_name.lower())
if str(x.cmd_name).lower() in vals else 100)
form.setViewFilters([
lambda c: str(c.cmd_name).lower() not in
('state', 'status') and any(
searchCl(s[0], str(c.cmd_name)) for s in params)
])
form.setDefaultParameters(
dict((k, v)
for k, v in (params if not hasattr(params, 'items')
else params.items()) if v))
for wid in form._cmdWidgets:
if not hasattr(wid, 'getCommand') or not hasattr(
wid, 'setDangerMessage'):
continue
if re.match('.*(on|off|init|open|close).*',
str(wid.getCommand().lower())):
wid.setDangerMessage(
'This action may affect other systems!')
# form._splitter.setStretchFactor(1,70)
# form._splitter.setStretchFactor(0,30)
form._splitter.setSizes([80, 20])
except Exception:
self.warning(
'Unable to setModel for TaurusDevicePanel.comms_form!!: %s' %
traceback.format_exc())
return form
import sys from taurus.external.qt import Qt from taurus.qt.qtgui.application import TaurusApplication app = TaurusApplication(sys.argv) panel = Qt.QWidget() layout = Qt.QHBoxLayout() panel.setLayout(layout) from taurus.qt.qtgui.container import TaurusWidget from taurus.qt.qtgui.display import TaurusLabel w1, w2, w3 = TaurusLabel(), TaurusLabel(), TaurusLabel() layout.addWidget(w1) layout.addWidget(w2) layout.addWidget(w3) w1.model, w1.bgRole = 'sys/tg_test/1/double_scalar#label', '' w2.model = 'sys/tg_test/1/double_scalar' w3.model, w3.bgRole = 'sys/tg_test/1/double_scalar#unit', '' panel.show() sys.exit(app.exec_())
class Ui_Form(object):
def setupUi(self, Form):
Form.setObjectName(_fromUtf8("Form"))
Form.resize(501, 414)
self.gridLayout_2 = QtGui.QGridLayout(Form)
self.gridLayout_2.setObjectName(_fromUtf8("gridLayout_2"))
self.groupBox = QtGui.QGroupBox(Form)
self.groupBox.setObjectName(_fromUtf8("groupBox"))
self.gridLayout = QtGui.QGridLayout(self.groupBox)
self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
self.taurusLabel = TaurusLabel(self.groupBox)
self.taurusLabel.setObjectName(_fromUtf8("taurusLabel"))
self.gridLayout.addWidget(self.taurusLabel, 0, 0, 1, 1)
self.taurusLabel_2 = TaurusLabel(self.groupBox)
self.taurusLabel_2.setObjectName(_fromUtf8("taurusLabel_2"))
self.gridLayout.addWidget(self.taurusLabel_2, 0, 2, 1, 1)
self.taurusLed_2 = TaurusLed(self.groupBox)
self.taurusLed_2.setObjectName(_fromUtf8("taurusLed_2"))
self.gridLayout.addWidget(self.taurusLed_2, 0, 3, 1, 1)
self.taurusLabel_3 = TaurusLabel(self.groupBox)
self.taurusLabel_3.setObjectName(_fromUtf8("taurusLabel_3"))
self.gridLayout.addWidget(self.taurusLabel_3, 1, 0, 1, 1)
self.taurusLabel_4 = TaurusLabel(self.groupBox)
self.taurusLabel_4.setObjectName(_fromUtf8("taurusLabel_4"))
self.gridLayout.addWidget(self.taurusLabel_4, 1, 2, 1, 1)
self.taurusLed_3 = TaurusLed(self.groupBox)
self.taurusLed_3.setObjectName(_fromUtf8("taurusLed_3"))
self.gridLayout.addWidget(self.taurusLed_3, 1, 3, 1, 1)
self.taurusLabel_5 = TaurusLabel(self.groupBox)
self.taurusLabel_5.setObjectName(_fromUtf8("taurusLabel_5"))
self.gridLayout.addWidget(self.taurusLabel_5, 2, 0, 1, 1)
self.taurusLabel_6 = TaurusLabel(self.groupBox)
self.taurusLabel_6.setObjectName(_fromUtf8("taurusLabel_6"))
self.gridLayout.addWidget(self.taurusLabel_6, 2, 2, 1, 1)
self.taurusLed_4 = TaurusLed(self.groupBox)
self.taurusLed_4.setObjectName(_fromUtf8("taurusLed_4"))
self.gridLayout.addWidget(self.taurusLed_4, 2, 3, 1, 1)
self.taurusLabel_7 = TaurusLabel(self.groupBox)
self.taurusLabel_7.setObjectName(_fromUtf8("taurusLabel_7"))
self.gridLayout.addWidget(self.taurusLabel_7, 3, 0, 1, 1)
self.taurusLabel_8 = TaurusLabel(self.groupBox)
self.taurusLabel_8.setObjectName(_fromUtf8("taurusLabel_8"))
self.gridLayout.addWidget(self.taurusLabel_8, 3, 2, 1, 1)
self.taurusLed_5 = TaurusLed(self.groupBox)
self.taurusLed_5.setObjectName(_fromUtf8("taurusLed_5"))
self.gridLayout.addWidget(self.taurusLed_5, 3, 3, 1, 1)
self.taurusLabel_9 = TaurusLabel(self.groupBox)
self.taurusLabel_9.setObjectName(_fromUtf8("taurusLabel_9"))
self.gridLayout.addWidget(self.taurusLabel_9, 4, 0, 1, 1)
self.taurusLabel_10 = TaurusLabel(self.groupBox)
self.taurusLabel_10.setObjectName(_fromUtf8("taurusLabel_10"))
self.gridLayout.addWidget(self.taurusLabel_10, 4, 2, 1, 1)
self.taurusLed_6 = TaurusLed(self.groupBox)
self.taurusLed_6.setObjectName(_fromUtf8("taurusLed_6"))
self.gridLayout.addWidget(self.taurusLed_6, 4, 3, 1, 1)
self.taurusLabel_11 = TaurusLabel(self.groupBox)
self.taurusLabel_11.setObjectName(_fromUtf8("taurusLabel_11"))
self.gridLayout.addWidget(self.taurusLabel_11, 5, 0, 1, 1)
self.taurusLabel_12 = TaurusLabel(self.groupBox)
self.taurusLabel_12.setObjectName(_fromUtf8("taurusLabel_12"))
self.gridLayout.addWidget(self.taurusLabel_12, 5, 2, 1, 1)
self.taurusLed_7 = TaurusLed(self.groupBox)
self.taurusLed_7.setObjectName(_fromUtf8("taurusLed_7"))
self.gridLayout.addWidget(self.taurusLed_7, 5, 3, 1, 1)
self.gridLayout_2.addWidget(self.groupBox, 0, 2, 1, 1)
self.groupBox_2 = QtGui.QGroupBox(Form)
self.groupBox_2.setObjectName(_fromUtf8("groupBox_2"))
self.gridLayout_3 = QtGui.QGridLayout(self.groupBox_2)
self.gridLayout_3.setObjectName(_fromUtf8("gridLayout_3"))
self.taurusLabel_13 = TaurusLabel(self.groupBox_2)
self.taurusLabel_13.setObjectName(_fromUtf8("taurusLabel_13"))
self.gridLayout_3.addWidget(self.taurusLabel_13, 0, 0, 1, 1)
self.taurusLabel_14 = TaurusLabel(self.groupBox_2)
self.taurusLabel_14.setObjectName(_fromUtf8("taurusLabel_14"))
self.gridLayout_3.addWidget(self.taurusLabel_14, 0, 2, 1, 1)
self.taurusLed_8 = TaurusLed(self.groupBox_2)
self.taurusLed_8.setObjectName(_fromUtf8("taurusLed_8"))
self.gridLayout_3.addWidget(self.taurusLed_8, 0, 3, 1, 1)
self.taurusLabel_15 = TaurusLabel(self.groupBox_2)
self.taurusLabel_15.setObjectName(_fromUtf8("taurusLabel_15"))
self.gridLayout_3.addWidget(self.taurusLabel_15, 1, 0, 1, 1)
self.taurusLabel_16 = TaurusLabel(self.groupBox_2)
self.taurusLabel_16.setObjectName(_fromUtf8("taurusLabel_16"))
self.gridLayout_3.addWidget(self.taurusLabel_16, 1, 2, 1, 1)
self.taurusLed_9 = TaurusLed(self.groupBox_2)
self.taurusLed_9.setObjectName(_fromUtf8("taurusLed_9"))
self.gridLayout_3.addWidget(self.taurusLed_9, 1, 3, 1, 1)
self.taurusLabel_17 = TaurusLabel(self.groupBox_2)
self.taurusLabel_17.setObjectName(_fromUtf8("taurusLabel_17"))
self.gridLayout_3.addWidget(self.taurusLabel_17, 2, 0, 1, 1)
self.taurusLabel_18 = TaurusLabel(self.groupBox_2)
self.taurusLabel_18.setObjectName(_fromUtf8("taurusLabel_18"))
self.gridLayout_3.addWidget(self.taurusLabel_18, 2, 2, 1, 1)
self.taurusLed_10 = TaurusLed(self.groupBox_2)
self.taurusLed_10.setObjectName(_fromUtf8("taurusLed_10"))
self.gridLayout_3.addWidget(self.taurusLed_10, 2, 3, 1, 1)
self.taurusLabel_19 = TaurusLabel(self.groupBox_2)
self.taurusLabel_19.setObjectName(_fromUtf8("taurusLabel_19"))
self.gridLayout_3.addWidget(self.taurusLabel_19, 3, 0, 1, 1)
self.taurusLabel_20 = TaurusLabel(self.groupBox_2)
self.taurusLabel_20.setObjectName(_fromUtf8("taurusLabel_20"))
self.gridLayout_3.addWidget(self.taurusLabel_20, 3, 2, 1, 1)
self.taurusLed_11 = TaurusLed(self.groupBox_2)
self.taurusLed_11.setObjectName(_fromUtf8("taurusLed_11"))
self.gridLayout_3.addWidget(self.taurusLed_11, 3, 3, 1, 1)
self.taurusLabel_21 = TaurusLabel(self.groupBox_2)
self.taurusLabel_21.setObjectName(_fromUtf8("taurusLabel_21"))
self.gridLayout_3.addWidget(self.taurusLabel_21, 4, 0, 1, 1)
self.taurusLabel_22 = TaurusLabel(self.groupBox_2)
self.taurusLabel_22.setObjectName(_fromUtf8("taurusLabel_22"))
self.gridLayout_3.addWidget(self.taurusLabel_22, 4, 2, 1, 1)
self.taurusLed_12 = TaurusLed(self.groupBox_2)
self.taurusLed_12.setObjectName(_fromUtf8("taurusLed_12"))
self.gridLayout_3.addWidget(self.taurusLed_12, 4, 3, 1, 1)
self.taurusLabel_23 = TaurusLabel(self.groupBox_2)
self.taurusLabel_23.setObjectName(_fromUtf8("taurusLabel_23"))
self.gridLayout_3.addWidget(self.taurusLabel_23, 5, 0, 1, 1)
self.taurusLabel_24 = TaurusLabel(self.groupBox_2)
self.taurusLabel_24.setObjectName(_fromUtf8("taurusLabel_24"))
self.gridLayout_3.addWidget(self.taurusLabel_24, 5, 2, 1, 1)
self.taurusLed_13 = TaurusLed(self.groupBox_2)
self.taurusLed_13.setObjectName(_fromUtf8("taurusLed_13"))
self.gridLayout_3.addWidget(self.taurusLed_13, 5, 3, 1, 1)
self.gridLayout_2.addWidget(self.groupBox_2, 0, 3, 1, 1)
self.groupBox_4 = QtGui.QGroupBox(Form)
self.groupBox_4.setObjectName(_fromUtf8("groupBox_4"))
self.gridLayout_5 = QtGui.QGridLayout(self.groupBox_4)
self.gridLayout_5.setObjectName(_fromUtf8("gridLayout_5"))
self.taurusLabel_26 = TaurusLabel(self.groupBox_4)
self.taurusLabel_26.setObjectName(_fromUtf8("taurusLabel_26"))
self.gridLayout_5.addWidget(self.taurusLabel_26, 0, 0, 1, 3)
self.taurusLed_14 = TaurusLed(self.groupBox_4)
self.taurusLed_14.setObjectName(_fromUtf8("taurusLed_14"))
self.gridLayout_5.addWidget(self.taurusLed_14, 1, 0, 1, 1)
self.taurusLabel_29 = TaurusLabel(self.groupBox_4)
self.taurusLabel_29.setObjectName(_fromUtf8("taurusLabel_29"))
self.gridLayout_5.addWidget(self.taurusLabel_29, 2, 0, 1, 1)
self.taurusLabel_30 = TaurusLabel(self.groupBox_4)
self.taurusLabel_30.setObjectName(_fromUtf8("taurusLabel_30"))
self.gridLayout_5.addWidget(self.taurusLabel_30, 2, 1, 1, 1)
self.taurusValueLineEdit_2 = TaurusValueLineEdit(self.groupBox_4)
self.taurusValueLineEdit_2.setObjectName(
_fromUtf8("taurusValueLineEdit_2"))
self.gridLayout_5.addWidget(self.taurusValueLineEdit_2, 2, 2, 1, 1)
self.taurusLabel_33 = TaurusLabel(self.groupBox_4)
self.taurusLabel_33.setObjectName(_fromUtf8("taurusLabel_33"))
self.gridLayout_5.addWidget(self.taurusLabel_33, 3, 0, 1, 1)
self.taurusLabel_34 = TaurusLabel(self.groupBox_4)
self.taurusLabel_34.setObjectName(_fromUtf8("taurusLabel_34"))
self.gridLayout_5.addWidget(self.taurusLabel_34, 3, 1, 1, 1)
self.taurusValueLineEdit_4 = TaurusValueLineEdit(self.groupBox_4)
self.taurusValueLineEdit_4.setObjectName(
_fromUtf8("taurusValueLineEdit_4"))
self.gridLayout_5.addWidget(self.taurusValueLineEdit_4, 3, 2, 1, 1)
self.taurusLabel_37 = TaurusLabel(self.groupBox_4)
self.taurusLabel_37.setObjectName(_fromUtf8("taurusLabel_37"))
self.gridLayout_5.addWidget(self.taurusLabel_37, 4, 0, 1, 1)
self.taurusLabel_38 = TaurusLabel(self.groupBox_4)
self.taurusLabel_38.setObjectName(_fromUtf8("taurusLabel_38"))
self.gridLayout_5.addWidget(self.taurusLabel_38, 4, 1, 1, 1)
self.taurusValueLineEdit_6 = TaurusValueLineEdit(self.groupBox_4)
self.taurusValueLineEdit_6.setObjectName(
_fromUtf8("taurusValueLineEdit_6"))
self.gridLayout_5.addWidget(self.taurusValueLineEdit_6, 4, 2, 1, 1)
self.horizontalLayout_2 = QtGui.QHBoxLayout()
self.horizontalLayout_2.setObjectName(_fromUtf8("horizontalLayout_2"))
self.taurusCommandButton_2 = TaurusCommandButton(self.groupBox_4)
self.taurusCommandButton_2.setObjectName(
_fromUtf8("taurusCommandButton_2"))
self.horizontalLayout_2.addWidget(self.taurusCommandButton_2)
self.cfgMg2 = QtGui.QToolButton(self.groupBox_4)
self.cfgMg2.setObjectName(_fromUtf8("cfgMg2"))
self.horizontalLayout_2.addWidget(self.cfgMg2)
self.horizontalLayout_2.setStretch(0, 1)
self.gridLayout_5.addLayout(self.horizontalLayout_2, 1, 1, 1, 2)
self.gridLayout_2.addWidget(self.groupBox_4, 1, 3, 1, 1)
self.groupBox_3 = QtGui.QGroupBox(Form)
self.groupBox_3.setObjectName(_fromUtf8("groupBox_3"))
self.gridLayout_4 = QtGui.QGridLayout(self.groupBox_3)
self.gridLayout_4.setObjectName(_fromUtf8("gridLayout_4"))
self.taurusLabel_25 = TaurusLabel(self.groupBox_3)
self.taurusLabel_25.setObjectName(_fromUtf8("taurusLabel_25"))
self.gridLayout_4.addWidget(self.taurusLabel_25, 0, 0, 1, 3)
self.taurusLabel_27 = TaurusLabel(self.groupBox_3)
self.taurusLabel_27.setObjectName(_fromUtf8("taurusLabel_27"))
self.gridLayout_4.addWidget(self.taurusLabel_27, 2, 1, 1, 1)
self.taurusLabel_28 = TaurusLabel(self.groupBox_3)
self.taurusLabel_28.setObjectName(_fromUtf8("taurusLabel_28"))
self.gridLayout_4.addWidget(self.taurusLabel_28, 2, 0, 1, 1)
self.taurusValueLineEdit = TaurusValueLineEdit(self.groupBox_3)
self.taurusValueLineEdit.setObjectName(
_fromUtf8("taurusValueLineEdit"))
self.gridLayout_4.addWidget(self.taurusValueLineEdit, 2, 2, 1, 1)
self.taurusLed = TaurusLed(self.groupBox_3)
self.taurusLed.setObjectName(_fromUtf8("taurusLed"))
self.gridLayout_4.addWidget(self.taurusLed, 1, 0, 1, 1)
self.taurusLabel_31 = TaurusLabel(self.groupBox_3)
self.taurusLabel_31.setObjectName(_fromUtf8("taurusLabel_31"))
self.gridLayout_4.addWidget(self.taurusLabel_31, 3, 0, 1, 1)
self.taurusLabel_32 = TaurusLabel(self.groupBox_3)
self.taurusLabel_32.setObjectName(_fromUtf8("taurusLabel_32"))
self.gridLayout_4.addWidget(self.taurusLabel_32, 3, 1, 1, 1)
self.taurusValueLineEdit_3 = TaurusValueLineEdit(self.groupBox_3)
self.taurusValueLineEdit_3.setObjectName(
_fromUtf8("taurusValueLineEdit_3"))
self.gridLayout_4.addWidget(self.taurusValueLineEdit_3, 3, 2, 1, 1)
self.taurusLabel_35 = TaurusLabel(self.groupBox_3)
self.taurusLabel_35.setObjectName(_fromUtf8("taurusLabel_35"))
self.gridLayout_4.addWidget(self.taurusLabel_35, 4, 0, 1, 1)
self.taurusLabel_36 = TaurusLabel(self.groupBox_3)
self.taurusLabel_36.setObjectName(_fromUtf8("taurusLabel_36"))
self.gridLayout_4.addWidget(self.taurusLabel_36, 4, 1, 1, 1)
self.taurusValueLineEdit_5 = TaurusValueLineEdit(self.groupBox_3)
self.taurusValueLineEdit_5.setObjectName(
_fromUtf8("taurusValueLineEdit_5"))
self.gridLayout_4.addWidget(self.taurusValueLineEdit_5, 4, 2, 1, 1)
self.horizontalLayout_3 = QtGui.QHBoxLayout()
self.horizontalLayout_3.setObjectName(_fromUtf8("horizontalLayout_3"))
self.taurusCommandButton = TaurusCommandButton(self.groupBox_3)
self.taurusCommandButton.setObjectName(
_fromUtf8("taurusCommandButton"))
self.horizontalLayout_3.addWidget(self.taurusCommandButton)
self.cfgMg1 = QtGui.QToolButton(self.groupBox_3)
self.cfgMg1.setObjectName(_fromUtf8("cfgMg1"))
self.horizontalLayout_3.addWidget(self.cfgMg1)
self.gridLayout_4.addLayout(self.horizontalLayout_3, 1, 1, 1, 2)
self.gridLayout_2.addWidget(self.groupBox_3, 1, 2, 1, 1)
self.retranslateUi(Form)
QtCore.QMetaObject.connectSlotsByName(Form)
def retranslateUi(self, Form):
Form.setWindowTitle(QtGui.QApplication.translate(
"Form", "Form", None, QtGui.QApplication.UnicodeUTF8))
self.groupBox.setTitle(QtGui.QApplication.translate(
"Form", "CTs of CTRL1", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/1/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_2.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/1/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_2.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/1/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_3.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/2/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_3.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_4.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/2/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_3.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/2/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_5.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/3/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_5.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_6.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/3/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_4.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/3/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_7.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/4/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_7.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_8.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/4/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_5.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/4/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_9.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/5/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_9.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_10.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/5/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_6.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/5/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_11.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/6/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_11.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_12.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/6/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_7.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl1/6/state", None, QtGui.QApplication.UnicodeUTF8))
self.groupBox_2.setTitle(QtGui.QApplication.translate(
"Form", "CTs of CTRL2", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_13.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/1/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_13.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_14.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/1/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_8.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/1/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_15.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/2/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_15.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_16.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/2/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_9.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/2/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_17.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/3/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_17.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_18.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/3/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_10.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/3/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_19.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/4/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_19.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_20.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/4/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_11.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/4/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_21.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/5/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_21.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_22.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/5/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_12.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/5/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_23.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/6/value?configuration=dev_alias", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_23.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_24.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/6/value", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_13.setModel(QtGui.QApplication.translate(
"Form", "expchan/dummyctctrl2/6/state", None, QtGui.QApplication.UnicodeUTF8))
self.groupBox_4.setTitle(QtGui.QApplication.translate(
"Form", "MG2", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_26.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/elementlist", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_26.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed_14.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_29.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/integrationtime?configuration=label", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_29.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_30.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/integrationtime", None, QtGui.QApplication.UnicodeUTF8))
self.taurusValueLineEdit_2.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/integrationtime", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_33.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/monitorcount?configuration=label", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_33.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_34.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/monitorcount", None, QtGui.QApplication.UnicodeUTF8))
self.taurusValueLineEdit_4.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/monitorcount", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_37.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/acquisitionmode?configuration=label", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_37.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_38.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/acquisitionmode", None, QtGui.QApplication.UnicodeUTF8))
self.taurusValueLineEdit_6.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2/acquisitionmode", None, QtGui.QApplication.UnicodeUTF8))
self.taurusCommandButton_2.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg2", None, QtGui.QApplication.UnicodeUTF8))
self.taurusCommandButton_2.setCommand(QtGui.QApplication.translate(
"Form", "start", None, QtGui.QApplication.UnicodeUTF8))
self.cfgMg2.setText(QtGui.QApplication.translate(
"Form", "...", None, QtGui.QApplication.UnicodeUTF8))
self.groupBox_3.setTitle(QtGui.QApplication.translate(
"Form", "MG1", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_25.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/elementlist", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_25.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_27.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/integrationtime", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_28.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/integrationtime?configuration=label", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_28.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusValueLineEdit.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/integrationtime", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLed.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/state", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_31.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/monitorcount?configuration=label", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_31.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_32.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/monitorcount", None, QtGui.QApplication.UnicodeUTF8))
self.taurusValueLineEdit_3.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/monitorcount", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_35.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/acquisitionmode?configuration=label", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_35.setBgRole(QtGui.QApplication.translate(
"Form", "none", None, QtGui.QApplication.UnicodeUTF8))
self.taurusLabel_36.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/acquisitionmode", None, QtGui.QApplication.UnicodeUTF8))
self.taurusValueLineEdit_5.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1/acquisitionmode", None, QtGui.QApplication.UnicodeUTF8))
self.taurusCommandButton.setModel(QtGui.QApplication.translate(
"Form", "mntgrp/v3/mg1", None, QtGui.QApplication.UnicodeUTF8))
self.taurusCommandButton.setCommand(QtGui.QApplication.translate(
"Form", "start", None, QtGui.QApplication.UnicodeUTF8))
self.cfgMg1.setText(QtGui.QApplication.translate(
"Form", "...", None, QtGui.QApplication.UnicodeUTF8))
from taurus.qt.qtgui.display import TaurusLabel import sys from taurus.qt.qtgui.application import TaurusApplication app = TaurusApplication(sys.argv) # The problem arises in some situations when the Taurus parenting is not the same # as the Qt parenting. For demonstration we use 3 widgets: # p <-- m <--c (the arrows indicate the *Qt* parent) # note that "m" not being a Taurus widget, implies that the *Taurus* parent of c is p # also note that we are not giving the parent in the constructor, but we rely on # doing it later on when adding to layout p = TaurusWidget() # Taurus parent m = Qt.QWidget() # midle widget (non Taurus) c = TaurusLabel() # Taurus child # here we call setUseParentModel before the parent is known! c.setUseParentModel(True) # we prepare the layouts m.setLayout(Qt.QVBoxLayout()) p.setLayout(Qt.QVBoxLayout()) # Now, by adding the widgets to the layout we are actually reparenting them. # The order in which we reparent determines success/failure: # if we do m-->p and then c-->m, it works, but if we do it in the opposite # order, we trigger the error. # (i.e., if we had called "p.layout().addWidget(m)" it would work work)
class MyDialog(QtGui.QWidget):
def __init__(self):
QtGui.QWidget.__init__(self)
uic.loadUi(
os.path.join(os.path.dirname(os.path.abspath(__file__)),
"gridComboboxSelection_pyQt_layout.ui"), self)
self.contenu = QtGui.QWidget()
self.gridLayout = QtGui.QGridLayout()
# Taille des collonnes
self.gridLayout.setColumnMinimumWidth(0, 100)
self.gridLayout.setColumnMinimumWidth(1, 70)
self.gridLayout.setColumnMinimumWidth(2, 70)
self.gridLayout.setColumnMinimumWidth(3, 70)
# self.gridLayout.setColumnMinimumWidth(4, 60)
self.gridLayout.setColumnMinimumWidth(5, 60)
# self.gridLayout.setColumnMinimumWidth(6, 80)
self.gridLayout.setColumnMinimumWidth(7, 80)
self.contenu.setLayout(self.gridLayout)
self.readFileAlim()
self.getFilterZones()
self.comboBoxType.currentIndexChanged.connect(self.updateTable)
self.comboBoxType.clear()
self.comboBoxType.insertItems(0, self.getFilterTypes())
self.comboBoxZone.currentIndexChanged.connect(self.updateTable)
self.comboBoxZone.clear()
self.comboBoxZone.insertItems(0, self.getFilterZones())
self.selectButton.clicked.connect(self.selectAll)
self.startButton.clicked.connect(self.startAll)
self.stopButton.clicked.connect(self.stopAll)
# self.updateList()
# self.updateTable()
def updateTable(self):
global checkList
checkList = []
# filtre venant du choix du combobox
# Recherche dans le dictionnaire
if filterTypes.has_key(str(self.comboBoxType.currentText())):
value_filterTypes = filterTypes.get(
str(self.comboBoxType.currentText()))
else:
value_filterTypes = 'All'
if filterZones.has_key(str(self.comboBoxZone.currentText())):
value_filterZones = filterZones.get(
str(self.comboBoxZone.currentText()))
else:
value_filterZones = 'All'
# nettoyage de la zone a ecrire
self.clearLayout(self.gridLayout)
# Header du tableau a ecrire après chaque .clear
#self.tableWidget.setHorizontalHeaderLabels(['Names','Current','Voltage'])
# If "All" is used, no filter is applied
# cette methode n'existe pas : il faut trouver un equivalent
# self.tableWidget.insertItems(0,[text for text in items if text_filter in text + "All"])
k = -1
#self.gridLayout.addWidget(self.styledPanel(),k,0,1,8)
for device in DeviceList:
if value_filterTypes in device + "All":
if value_filterZones in device + "All":
# test line
k += 1
self.gridLayout.addWidget(self.Hline(), k, 0, 1, 8)
k += 1
self.gridLayout.setRowMinimumHeight(k, 40)
# Bouton ouverture device
self.buttonDevice = QtGui.QPushButton()
self.buttonDevice.setText(device)
self.buttonDevice.clicked.connect(AfficheDevice(device))
self.gridLayout.addWidget(self.buttonDevice, k, 0)
# Afficheur courant
self.afficheurCurrent = TaurusLabel()
self.afficheurCurrent.setModel(device + '/double_scalar')
self.gridLayout.addWidget(self.afficheurCurrent, k, 1)
# Afficheur tension
self.afficheurVoltage = TaurusLabel()
self.afficheurVoltage.setModel(device + '/float_scalar')
self.gridLayout.addWidget(self.afficheurVoltage, k, 2)
# Lecture consigne courant
self.afficheurCurrentSP = TaurusLabel()
self.afficheurCurrentSP.setModel(device + '/ampli')
self.gridLayout.addWidget(self.afficheurCurrentSP, k, 3)
# Ecriture consigne courant
self.writeCurrentSP = TaurusWheelEdit()
self.writeCurrentSP.setModel(device + '/ampli')
self.gridLayout.addWidget(self.writeCurrentSP, k, 4)
# Afficheur etat
self.afficheurState = TaurusLabel()
self.afficheurState.setModel(device + '/State')
self.gridLayout.addWidget(self.afficheurState, k, 5)
# CheckBox de selection
self.buttonSelect = QtGui.QCheckBox(device, self)
self.gridLayout.addWidget(self.buttonSelect, k, 6)
checkList.append(self.buttonSelect)
# Bouton commande Taurus
self.commandButtonSwitch = TaurusCommandButton(
command='SwitchStates', text='Switch State')
self.commandButtonSwitch.setModel(device)
self.gridLayout.addWidget(self.commandButtonSwitch, k, 7)
self.scrollArea.setWidget(self.contenu)
def readFileAlim(self):
# Read Device name in file
# List of Device name
global DeviceList
DeviceList = []
with open("alim.txt") as f:
for line in f:
DeviceList.append(line.strip())
def getDeviceAttributes(self):
for device in DeviceList:
device.readAttributes()
self.updateTable()
def clearLayout(self, layout):
print layout.count()
while layout.count():
child = layout.takeAt(0)
if child.widget() is not None:
child.widget().deleteLater()
elif child.layout() is not None:
clearLayout(child.layout())
def getFilterTypes(self):
# Dictionnaire du filtre
global filterTypes
filterTypes = {
"Dipole": "DP",
"Quadripole": "QP",
"Sextupole": "SP",
"Steerer": "STR",
"Coil": "COL"
}
#return les clefs du filtre
return map(str, filterTypes.keys() + ['All'])
def getFilterZones(self):
# Dictionnaire du filtre
global filterZones
filterZones = {
"Linac": "LI",
"Transfert line": "TL",
"Extraction line": "EL",
"Ring C1": "RI-C1",
"Ring-C2": "RI-C2"
}
#return les clefs du filtre
return map(str, filterZones.keys() + ['All'])
def selectAll(self):
for check in checkList:
check.setCheckState(True)
def startAll(self):
for check in checkList:
if check.checkState():
print(check.text())
def stopAll(self):
for check in checkList:
if check.checkState():
print(check.text())
def Hline(self):
line = QFrame()
line.setFrameShape(QFrame.HLine)
line.setFrameShadow(QFrame.Sunken)
return line
def Vline(self):
line = QFrame()
line.setFrameShape(QFrame.VLine)
line.setFrameShadow(QFrame.Sunken)
return line
def styledPanel(self):
line = QFrame()
line.setFrameShape(QFrame.StyledPanel)
line.setFrameShadow(QFrame.Sunken)
return line
def setupUi(self, Form):
Form.setObjectName(_fromUtf8("Form"))
Form.resize(501, 414)
self.gridLayout_2 = QtGui.QGridLayout(Form)
self.gridLayout_2.setObjectName(_fromUtf8("gridLayout_2"))
self.groupBox = QtGui.QGroupBox(Form)
self.groupBox.setObjectName(_fromUtf8("groupBox"))
self.gridLayout = QtGui.QGridLayout(self.groupBox)
self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
self.taurusLabel = TaurusLabel(self.groupBox)
self.taurusLabel.setObjectName(_fromUtf8("taurusLabel"))
self.gridLayout.addWidget(self.taurusLabel, 0, 0, 1, 1)
self.taurusLabel_2 = TaurusLabel(self.groupBox)
self.taurusLabel_2.setObjectName(_fromUtf8("taurusLabel_2"))
self.gridLayout.addWidget(self.taurusLabel_2, 0, 2, 1, 1)
self.taurusLed_2 = TaurusLed(self.groupBox)
self.taurusLed_2.setObjectName(_fromUtf8("taurusLed_2"))
self.gridLayout.addWidget(self.taurusLed_2, 0, 3, 1, 1)
self.taurusLabel_3 = TaurusLabel(self.groupBox)
self.taurusLabel_3.setObjectName(_fromUtf8("taurusLabel_3"))
self.gridLayout.addWidget(self.taurusLabel_3, 1, 0, 1, 1)
self.taurusLabel_4 = TaurusLabel(self.groupBox)
self.taurusLabel_4.setObjectName(_fromUtf8("taurusLabel_4"))
self.gridLayout.addWidget(self.taurusLabel_4, 1, 2, 1, 1)
self.taurusLed_3 = TaurusLed(self.groupBox)
self.taurusLed_3.setObjectName(_fromUtf8("taurusLed_3"))
self.gridLayout.addWidget(self.taurusLed_3, 1, 3, 1, 1)
self.taurusLabel_5 = TaurusLabel(self.groupBox)
self.taurusLabel_5.setObjectName(_fromUtf8("taurusLabel_5"))
self.gridLayout.addWidget(self.taurusLabel_5, 2, 0, 1, 1)
self.taurusLabel_6 = TaurusLabel(self.groupBox)
self.taurusLabel_6.setObjectName(_fromUtf8("taurusLabel_6"))
self.gridLayout.addWidget(self.taurusLabel_6, 2, 2, 1, 1)
self.taurusLed_4 = TaurusLed(self.groupBox)
self.taurusLed_4.setObjectName(_fromUtf8("taurusLed_4"))
self.gridLayout.addWidget(self.taurusLed_4, 2, 3, 1, 1)
self.taurusLabel_7 = TaurusLabel(self.groupBox)
self.taurusLabel_7.setObjectName(_fromUtf8("taurusLabel_7"))
self.gridLayout.addWidget(self.taurusLabel_7, 3, 0, 1, 1)
self.taurusLabel_8 = TaurusLabel(self.groupBox)
self.taurusLabel_8.setObjectName(_fromUtf8("taurusLabel_8"))
self.gridLayout.addWidget(self.taurusLabel_8, 3, 2, 1, 1)
self.taurusLed_5 = TaurusLed(self.groupBox)
self.taurusLed_5.setObjectName(_fromUtf8("taurusLed_5"))
self.gridLayout.addWidget(self.taurusLed_5, 3, 3, 1, 1)
self.taurusLabel_9 = TaurusLabel(self.groupBox)
self.taurusLabel_9.setObjectName(_fromUtf8("taurusLabel_9"))
self.gridLayout.addWidget(self.taurusLabel_9, 4, 0, 1, 1)
self.taurusLabel_10 = TaurusLabel(self.groupBox)
self.taurusLabel_10.setObjectName(_fromUtf8("taurusLabel_10"))
self.gridLayout.addWidget(self.taurusLabel_10, 4, 2, 1, 1)
self.taurusLed_6 = TaurusLed(self.groupBox)
self.taurusLed_6.setObjectName(_fromUtf8("taurusLed_6"))
self.gridLayout.addWidget(self.taurusLed_6, 4, 3, 1, 1)
self.taurusLabel_11 = TaurusLabel(self.groupBox)
self.taurusLabel_11.setObjectName(_fromUtf8("taurusLabel_11"))
self.gridLayout.addWidget(self.taurusLabel_11, 5, 0, 1, 1)
self.taurusLabel_12 = TaurusLabel(self.groupBox)
self.taurusLabel_12.setObjectName(_fromUtf8("taurusLabel_12"))
self.gridLayout.addWidget(self.taurusLabel_12, 5, 2, 1, 1)
self.taurusLed_7 = TaurusLed(self.groupBox)
self.taurusLed_7.setObjectName(_fromUtf8("taurusLed_7"))
self.gridLayout.addWidget(self.taurusLed_7, 5, 3, 1, 1)
self.gridLayout_2.addWidget(self.groupBox, 0, 2, 1, 1)
self.groupBox_2 = QtGui.QGroupBox(Form)
self.groupBox_2.setObjectName(_fromUtf8("groupBox_2"))
self.gridLayout_3 = QtGui.QGridLayout(self.groupBox_2)
self.gridLayout_3.setObjectName(_fromUtf8("gridLayout_3"))
self.taurusLabel_13 = TaurusLabel(self.groupBox_2)
self.taurusLabel_13.setObjectName(_fromUtf8("taurusLabel_13"))
self.gridLayout_3.addWidget(self.taurusLabel_13, 0, 0, 1, 1)
self.taurusLabel_14 = TaurusLabel(self.groupBox_2)
self.taurusLabel_14.setObjectName(_fromUtf8("taurusLabel_14"))
self.gridLayout_3.addWidget(self.taurusLabel_14, 0, 2, 1, 1)
self.taurusLed_8 = TaurusLed(self.groupBox_2)
self.taurusLed_8.setObjectName(_fromUtf8("taurusLed_8"))
self.gridLayout_3.addWidget(self.taurusLed_8, 0, 3, 1, 1)
self.taurusLabel_15 = TaurusLabel(self.groupBox_2)
self.taurusLabel_15.setObjectName(_fromUtf8("taurusLabel_15"))
self.gridLayout_3.addWidget(self.taurusLabel_15, 1, 0, 1, 1)
self.taurusLabel_16 = TaurusLabel(self.groupBox_2)
self.taurusLabel_16.setObjectName(_fromUtf8("taurusLabel_16"))
self.gridLayout_3.addWidget(self.taurusLabel_16, 1, 2, 1, 1)
self.taurusLed_9 = TaurusLed(self.groupBox_2)
self.taurusLed_9.setObjectName(_fromUtf8("taurusLed_9"))
self.gridLayout_3.addWidget(self.taurusLed_9, 1, 3, 1, 1)
self.taurusLabel_17 = TaurusLabel(self.groupBox_2)
self.taurusLabel_17.setObjectName(_fromUtf8("taurusLabel_17"))
self.gridLayout_3.addWidget(self.taurusLabel_17, 2, 0, 1, 1)
self.taurusLabel_18 = TaurusLabel(self.groupBox_2)
self.taurusLabel_18.setObjectName(_fromUtf8("taurusLabel_18"))
self.gridLayout_3.addWidget(self.taurusLabel_18, 2, 2, 1, 1)
self.taurusLed_10 = TaurusLed(self.groupBox_2)
self.taurusLed_10.setObjectName(_fromUtf8("taurusLed_10"))
self.gridLayout_3.addWidget(self.taurusLed_10, 2, 3, 1, 1)
self.taurusLabel_19 = TaurusLabel(self.groupBox_2)
self.taurusLabel_19.setObjectName(_fromUtf8("taurusLabel_19"))
self.gridLayout_3.addWidget(self.taurusLabel_19, 3, 0, 1, 1)
self.taurusLabel_20 = TaurusLabel(self.groupBox_2)
self.taurusLabel_20.setObjectName(_fromUtf8("taurusLabel_20"))
self.gridLayout_3.addWidget(self.taurusLabel_20, 3, 2, 1, 1)
self.taurusLed_11 = TaurusLed(self.groupBox_2)
self.taurusLed_11.setObjectName(_fromUtf8("taurusLed_11"))
self.gridLayout_3.addWidget(self.taurusLed_11, 3, 3, 1, 1)
self.taurusLabel_21 = TaurusLabel(self.groupBox_2)
self.taurusLabel_21.setObjectName(_fromUtf8("taurusLabel_21"))
self.gridLayout_3.addWidget(self.taurusLabel_21, 4, 0, 1, 1)
self.taurusLabel_22 = TaurusLabel(self.groupBox_2)
self.taurusLabel_22.setObjectName(_fromUtf8("taurusLabel_22"))
self.gridLayout_3.addWidget(self.taurusLabel_22, 4, 2, 1, 1)
self.taurusLed_12 = TaurusLed(self.groupBox_2)
self.taurusLed_12.setObjectName(_fromUtf8("taurusLed_12"))
self.gridLayout_3.addWidget(self.taurusLed_12, 4, 3, 1, 1)
self.taurusLabel_23 = TaurusLabel(self.groupBox_2)
self.taurusLabel_23.setObjectName(_fromUtf8("taurusLabel_23"))
self.gridLayout_3.addWidget(self.taurusLabel_23, 5, 0, 1, 1)
self.taurusLabel_24 = TaurusLabel(self.groupBox_2)
self.taurusLabel_24.setObjectName(_fromUtf8("taurusLabel_24"))
self.gridLayout_3.addWidget(self.taurusLabel_24, 5, 2, 1, 1)
self.taurusLed_13 = TaurusLed(self.groupBox_2)
self.taurusLed_13.setObjectName(_fromUtf8("taurusLed_13"))
self.gridLayout_3.addWidget(self.taurusLed_13, 5, 3, 1, 1)
self.gridLayout_2.addWidget(self.groupBox_2, 0, 3, 1, 1)
self.groupBox_4 = QtGui.QGroupBox(Form)
self.groupBox_4.setObjectName(_fromUtf8("groupBox_4"))
self.gridLayout_5 = QtGui.QGridLayout(self.groupBox_4)
self.gridLayout_5.setObjectName(_fromUtf8("gridLayout_5"))
self.taurusLabel_26 = TaurusLabel(self.groupBox_4)
self.taurusLabel_26.setObjectName(_fromUtf8("taurusLabel_26"))
self.gridLayout_5.addWidget(self.taurusLabel_26, 0, 0, 1, 3)
self.taurusLed_14 = TaurusLed(self.groupBox_4)
self.taurusLed_14.setObjectName(_fromUtf8("taurusLed_14"))
self.gridLayout_5.addWidget(self.taurusLed_14, 1, 0, 1, 1)
self.taurusLabel_29 = TaurusLabel(self.groupBox_4)
self.taurusLabel_29.setObjectName(_fromUtf8("taurusLabel_29"))
self.gridLayout_5.addWidget(self.taurusLabel_29, 2, 0, 1, 1)
self.taurusLabel_30 = TaurusLabel(self.groupBox_4)
self.taurusLabel_30.setObjectName(_fromUtf8("taurusLabel_30"))
self.gridLayout_5.addWidget(self.taurusLabel_30, 2, 1, 1, 1)
self.taurusValueLineEdit_2 = TaurusValueLineEdit(self.groupBox_4)
self.taurusValueLineEdit_2.setObjectName(
_fromUtf8("taurusValueLineEdit_2"))
self.gridLayout_5.addWidget(self.taurusValueLineEdit_2, 2, 2, 1, 1)
self.taurusLabel_33 = TaurusLabel(self.groupBox_4)
self.taurusLabel_33.setObjectName(_fromUtf8("taurusLabel_33"))
self.gridLayout_5.addWidget(self.taurusLabel_33, 3, 0, 1, 1)
self.taurusLabel_34 = TaurusLabel(self.groupBox_4)
self.taurusLabel_34.setObjectName(_fromUtf8("taurusLabel_34"))
self.gridLayout_5.addWidget(self.taurusLabel_34, 3, 1, 1, 1)
self.taurusValueLineEdit_4 = TaurusValueLineEdit(self.groupBox_4)
self.taurusValueLineEdit_4.setObjectName(
_fromUtf8("taurusValueLineEdit_4"))
self.gridLayout_5.addWidget(self.taurusValueLineEdit_4, 3, 2, 1, 1)
self.taurusLabel_37 = TaurusLabel(self.groupBox_4)
self.taurusLabel_37.setObjectName(_fromUtf8("taurusLabel_37"))
self.gridLayout_5.addWidget(self.taurusLabel_37, 4, 0, 1, 1)
self.taurusLabel_38 = TaurusLabel(self.groupBox_4)
self.taurusLabel_38.setObjectName(_fromUtf8("taurusLabel_38"))
self.gridLayout_5.addWidget(self.taurusLabel_38, 4, 1, 1, 1)
self.taurusValueLineEdit_6 = TaurusValueLineEdit(self.groupBox_4)
self.taurusValueLineEdit_6.setObjectName(
_fromUtf8("taurusValueLineEdit_6"))
self.gridLayout_5.addWidget(self.taurusValueLineEdit_6, 4, 2, 1, 1)
self.horizontalLayout_2 = QtGui.QHBoxLayout()
self.horizontalLayout_2.setObjectName(_fromUtf8("horizontalLayout_2"))
self.taurusCommandButton_2 = TaurusCommandButton(self.groupBox_4)
self.taurusCommandButton_2.setObjectName(
_fromUtf8("taurusCommandButton_2"))
self.horizontalLayout_2.addWidget(self.taurusCommandButton_2)
self.cfgMg2 = QtGui.QToolButton(self.groupBox_4)
self.cfgMg2.setObjectName(_fromUtf8("cfgMg2"))
self.horizontalLayout_2.addWidget(self.cfgMg2)
self.horizontalLayout_2.setStretch(0, 1)
self.gridLayout_5.addLayout(self.horizontalLayout_2, 1, 1, 1, 2)
self.gridLayout_2.addWidget(self.groupBox_4, 1, 3, 1, 1)
self.groupBox_3 = QtGui.QGroupBox(Form)
self.groupBox_3.setObjectName(_fromUtf8("groupBox_3"))
self.gridLayout_4 = QtGui.QGridLayout(self.groupBox_3)
self.gridLayout_4.setObjectName(_fromUtf8("gridLayout_4"))
self.taurusLabel_25 = TaurusLabel(self.groupBox_3)
self.taurusLabel_25.setObjectName(_fromUtf8("taurusLabel_25"))
self.gridLayout_4.addWidget(self.taurusLabel_25, 0, 0, 1, 3)
self.taurusLabel_27 = TaurusLabel(self.groupBox_3)
self.taurusLabel_27.setObjectName(_fromUtf8("taurusLabel_27"))
self.gridLayout_4.addWidget(self.taurusLabel_27, 2, 1, 1, 1)
self.taurusLabel_28 = TaurusLabel(self.groupBox_3)
self.taurusLabel_28.setObjectName(_fromUtf8("taurusLabel_28"))
self.gridLayout_4.addWidget(self.taurusLabel_28, 2, 0, 1, 1)
self.taurusValueLineEdit = TaurusValueLineEdit(self.groupBox_3)
self.taurusValueLineEdit.setObjectName(
_fromUtf8("taurusValueLineEdit"))
self.gridLayout_4.addWidget(self.taurusValueLineEdit, 2, 2, 1, 1)
self.taurusLed = TaurusLed(self.groupBox_3)
self.taurusLed.setObjectName(_fromUtf8("taurusLed"))
self.gridLayout_4.addWidget(self.taurusLed, 1, 0, 1, 1)
self.taurusLabel_31 = TaurusLabel(self.groupBox_3)
self.taurusLabel_31.setObjectName(_fromUtf8("taurusLabel_31"))
self.gridLayout_4.addWidget(self.taurusLabel_31, 3, 0, 1, 1)
self.taurusLabel_32 = TaurusLabel(self.groupBox_3)
self.taurusLabel_32.setObjectName(_fromUtf8("taurusLabel_32"))
self.gridLayout_4.addWidget(self.taurusLabel_32, 3, 1, 1, 1)
self.taurusValueLineEdit_3 = TaurusValueLineEdit(self.groupBox_3)
self.taurusValueLineEdit_3.setObjectName(
_fromUtf8("taurusValueLineEdit_3"))
self.gridLayout_4.addWidget(self.taurusValueLineEdit_3, 3, 2, 1, 1)
self.taurusLabel_35 = TaurusLabel(self.groupBox_3)
self.taurusLabel_35.setObjectName(_fromUtf8("taurusLabel_35"))
self.gridLayout_4.addWidget(self.taurusLabel_35, 4, 0, 1, 1)
self.taurusLabel_36 = TaurusLabel(self.groupBox_3)
self.taurusLabel_36.setObjectName(_fromUtf8("taurusLabel_36"))
self.gridLayout_4.addWidget(self.taurusLabel_36, 4, 1, 1, 1)
self.taurusValueLineEdit_5 = TaurusValueLineEdit(self.groupBox_3)
self.taurusValueLineEdit_5.setObjectName(
_fromUtf8("taurusValueLineEdit_5"))
self.gridLayout_4.addWidget(self.taurusValueLineEdit_5, 4, 2, 1, 1)
self.horizontalLayout_3 = QtGui.QHBoxLayout()
self.horizontalLayout_3.setObjectName(_fromUtf8("horizontalLayout_3"))
self.taurusCommandButton = TaurusCommandButton(self.groupBox_3)
self.taurusCommandButton.setObjectName(
_fromUtf8("taurusCommandButton"))
self.horizontalLayout_3.addWidget(self.taurusCommandButton)
self.cfgMg1 = QtGui.QToolButton(self.groupBox_3)
self.cfgMg1.setObjectName(_fromUtf8("cfgMg1"))
self.horizontalLayout_3.addWidget(self.cfgMg1)
self.gridLayout_4.addLayout(self.horizontalLayout_3, 1, 1, 1, 2)
self.gridLayout_2.addWidget(self.groupBox_3, 1, 2, 1, 1)
self.retranslateUi(Form)
QtCore.QMetaObject.connectSlotsByName(Form)
from taurus.qt.qtgui.container import TaurusWidget from taurus.qt.qtgui.display import TaurusLabel import sys app = Qt.QApplication(sys.argv) # The problem arises in some situations when the Taurus parenting is not the same # as the Qt parenting. For demonstration we use 3 widgets: # p <-- m <--c (the arrows indicate the *Qt* parent) # note that "m" not being a Taurus widget, implies that the *Taurus* parent of c is p # also note that we are not giving the parent in the constructor, but we rely on # doing it later on when adding to layout p = TaurusWidget() # Taurus parent m = Qt.QWidget() # midle widget (non Taurus) c = TaurusLabel() # Taurus child # here we call setUseParentModel before the parent is known! c.setUseParentModel(True) # we prepare the layouts m.setLayout(Qt.QVBoxLayout()) p.setLayout(Qt.QVBoxLayout()) # Now, by adding the widgets to the layout we are actually reparenting them. # The order in which we reparent determines success/failure: # if we do m-->p and then c-->m, it works, but if we do it in the opposite # order, we trigger the error. # (i.e., if we had called "p.layout().addWidget(m)" it would work work)
import sys
from taurus.external.qt import Qt
from taurus.qt.qtgui.display import TaurusLabel
app = Qt.QApplication(sys.argv)
panel = Qt.QWidget()
w = TaurusLabel(panel)
w.setModel('sys/taurustest/1/state')
panel.show()
sys.exit(app.exec_())
import sys
from taurus.external.qt import Qt
from taurus.qt.qtgui.display import TaurusLabel
app = Qt.QApplication(sys.argv)
panel = Qt.QWidget()
layout = Qt.QGridLayout()
panel.setLayout(layout)
for y in range(4):
for x in range(2):
w = TaurusLabel()
w.setModel('sys/taurustest/%d/state' % ((y + 1) + 4 * x))
w.setShowText(False)
w.setBgRole('state')
layout.addWidget(w, x, y)
panel.show()
sys.exit(app.exec_())
import sys from taurus.external.qt import Qt from taurus.qt.qtgui.application import TaurusApplication app = TaurusApplication(sys.argv) panel = Qt.QWidget() layout = Qt.QHBoxLayout() panel.setLayout(layout) from taurus.qt.qtgui.display import TaurusLabel w1 = TaurusLabel() w2 = TaurusLabel() layout.addWidget(w1) layout.addWidget(w2) w1.model = 'sys/tg_test/1/double_scalar#label' w1.bgRole = '' w2.model = 'sys/tg_test/1/double_scalar' panel.show() sys.exit(app.exec_())
class Ui_Form(object):
def setupUi(self, Form, element):
self.deviceProxy = element[0]
description = element[1]
Form.setObjectName("Form")
Form.resize(260, 104)
self.verticalLayout = QtGui.QVBoxLayout(Form)
self.verticalLayout.setSpacing(1)
self.verticalLayout.setMargin(5)
self.verticalLayout.setObjectName("verticalLayout")
########################
# HORIZONTAL 1
########################
self.horizontalLayout = QtGui.QHBoxLayout()
self.horizontalLayout.setObjectName("horizontalLayout")
# Element Name -> OpenWidgetButton (Cosywidgets)
self.ElementName = OpenWidgetButton(Form)
self.ElementName.setText(self.deviceProxy.split("/")[2] + " ")
self.horizontalLayout.addWidget(self.ElementName)
# LED for state
self.stateT = TaurusLed(Form)
self.stateT.setFixedSize(QtCore.QSize(20, 20))
self.stateT.setObjectName("stateT")
self.horizontalLayout.addWidget(self.stateT)
# Command combobox (Cosywidgets)
self.comboBox = CommandComboBox(Form)
self.comboBox.setObjectName("comboBox")
self.comboBox.setFixedHeight(20)
self.horizontalLayout.addWidget(self.comboBox)
self.comboBox.addItems(["Start", "Stop", "Init"])
self.verticalLayout.addLayout(self.horizontalLayout)
########################
# HORIZONTAL 2
########################
self.horizontalLayout_2 = QtGui.QHBoxLayout()
self.horizontalLayout_2.setObjectName("horizontalLayout_2")
# DESIRED ATTRIBUTE ...
self.pressure = QtGui.QLabel(Form)
self.pressure.setObjectName("pressure")
self.horizontalLayout_2.addWidget(self.pressure)
self.pressureT = TaurusLabel(Form)
self.pressureT.setObjectName("pressureT")
self.pressureT.setFixedWidth(180)
self.horizontalLayout_2.addWidget(self.pressureT)
self.pressureU = QtGui.QLabel(Form)
self.pressureU.setText("mBar")
self.horizontalLayout_2.addWidget(self.pressureU)
self.verticalLayout.addLayout(self.horizontalLayout_2)
########################
# HORIZONTAL 3
########################
# ...
########################
# DESCRIPTION
########################
self.descLabel = QtGui.QLabel(u'\u2022' + " " + description)
self.descLabel.setStyleSheet("background-color: lightblue; border: 1px solid grey;")
self.descLabel.setToolTip(description)
self.verticalLayout.addSpacing(2)
self.verticalLayout.addWidget(self.descLabel)
self.retranslateUi(Form)
QtCore.QMetaObject.connectSlotsByName(Form)
def retranslateUi(self, Form):
Form.setWindowTitle(QtGui.QApplication.translate("Form", "Form", None, QtGui.QApplication.UnicodeUTF8))
self.pressure.setText(QtGui.QApplication.translate("Form", "Pressure:", None, QtGui.QApplication.UnicodeUTF8))
# SHOW/HIDE DESCRIPTION
def showDescription(self, show):
if show:
self.descLabel.show()
else:
self.descLabel.hide()
# SEPARATE SET MODEL -> background thread
def setModel(self):
self.ElementName.setModel(self.deviceProxy)
self.stateT.setModel(self.deviceProxy + "/State")
self.comboBox.setModel(self.deviceProxy)
self.pressureT.setModel(self.deviceProxy + "/pressure")
try:
self.pressureU.setText(PyTango.AttributeProxy(self.deviceProxy + "/pressure").get_config().unit)
except PyTango.DevFailed:
pass
class PoolIORegisterButtons(TaurusWidget):
''' A widget that displays and controls a pool IORegister device.
It reads the value and provides buttons to switch between values.
NOTE: It would be nice to provide 'ABORT' button if the device allows it.
NOTE: It would be nice to set icons for each possible value label.
'''
def __init__(self, parent=None, designMode=False):
TaurusWidget.__init__(self, parent, designMode)
self.loadUi()
self.ioreg_dev = None
self.alias_label = TaurusLabel()
self.alias_label.setBgRole('state')
self.value_label = PoolIORegisterReadWidget()
self.button_value_dict = {}
policy = self.value_label.sizePolicy()
policy.setHorizontalPolicy(Qt.QSizePolicy.Expanding)
self.value_label.setSizePolicy(policy)
self.ui.lo_state_read.addWidget(self.alias_label)
self.ui.lo_state_read.addWidget(self.value_label)
def setModel(self, model):
try:
self.ioreg_dev = taurus.Device(model)
except:
return
self.alias_label.setModel('%s/State?configuration=dev_alias' % model)
self.value_label.setModel(model)
# Empty previous buttons
# self.ui.lo_buttons_write.
for button in self.button_value_dict.keys():
self.button.clicked.disconnect(self.writeValue)
button.deleteLater()
self.button_value_dict = {}
labels = self.ioreg_dev.getAttribute('Labels').read().value
labels_list = labels.split(' ')
# Update the mapping
for label_and_value in labels_list:
label, value = label_and_value.split(':')
button = Qt.QPushButton(label)
self.button_value_dict[button] = value
self.ui.lo_buttons_write.addWidget(button)
self.button.clicked.connect(self.writeValue)
def writeValue(self):
if self.ioreg_dev is None:
return
button = self.sender()
value = self.button_value_dict[button]
self.ioreg_dev.getAttribute('Value').write(value)
def showEvent(self, event):
TaurusWidget.showEvent(self, event)
if self.ioreg_dev is not None:
self.ioreg_dev.getAttribute('Value').enablePolling(force=True)
def hideEvent(self, event):
TaurusWidget.hideEvent(self, event)
if self.ioreg_dev is not None:
self.ioreg_dev.getAttribute('Value').disablePolling()
