def get_two_nodes(self):
g = NetworkGraph()
g.add_router('R1')
g.add_router('R2')
g.add_router_edge('R1', 'R2')
g.add_router_edge('R2', 'R1')
return g
def ebgp_net():
graph = NetworkGraph()
r1, r2 = 'R1', 'R2'
graph.add_router(r1)
graph.add_router(r2)
graph.add_router_edge(r1, r2)
graph.add_router_edge(r2, r1)
# BGP configs
graph.set_bgp_asnum(r1, 100)
graph.set_bgp_asnum(r2, 200)
graph.add_bgp_neighbor(r1, r2)
# Some internal to be announced network
net = ip_network(u'128.0.0.0/24')
prefix = '128_0_0_0'
lo0 = 'lo10'
prefix_map = {prefix: net}
loaddr = ip_interface("%s/%d" % (net.hosts().next(), net.prefixlen))
graph.set_loopback_addr(r1, lo0, loaddr)
graph.add_bgp_announces(r1, lo0)
# Synthesize all the interfaces and link configurations
connecte_syn = ConnectedSyn(graph, full=True)
assert connecte_syn.synthesize()
graph.set_iface_names()
gns3 = GNS3Topo(graph=graph, prefix_map=prefix_map)
gns3.write_configs('out-configs/ebgp-simple')
def gen_grid_topology(m, n, nets_per_router):
"""
Generate 2D m*n routers topology
each router is connected to `net_per_router` networks
"""
g = NetworkGraph()
rows = range(1, m + 1)
columns = range(1, n + 1)
networks = range(1, nets_per_router + 1)
for i in rows:
for j in columns:
node = 'R%d%d' % (i, j)
g.add_router(node)
for n in networks:
net = 'N%d%d_%d' % (i, j, n)
g.add_network(net)
g.add_network_edge(net, node)
g.add_network_edge(node, net)
for i in rows:
for j in columns:
# Connect rows
if j > 1:
node1 = 'R%d%d' % (i, j)
node2 = 'R%d%d' % (i, j - 1)
g.add_router_edge(node1, node2)
g.add_router_edge(node2, node1)
# Connect columns
if i > 1:
node1 = 'R%d%d' % (i, j)
node2 = 'R%d%d' % (i - 1, j)
g.add_router_edge(node1, node2)
g.add_router_edge(node2, node1)
return g
def test_add_router_link(self):
# init
g = NetworkGraph()
router1 = 'R1'
router2 = 'R2'
g.add_router(router1)
g.add_router(router2)
# Action
g.add_router_edge(router1, router2)
# Assert
self.assertEqual(list(g.edges()), [(router1, router2)])
self.assertEqual(g[router1][router2][EDGE_TYPE], EDGETYPE.ROUTER)
def get_ebgp_linear_topo(N=2):
"""Return N routers configured in a linear topology"""
net = NetworkGraph()
for i in range(1, N + 1):
name = "R%d" % i
net.add_router(name)
net.set_bgp_asnum(name, i * 100)
for i in range(1, N):
r1 = "R%d" % i
r2 = "R%d" % (i + 1)
net.add_router_edge(r1, r2)
net.add_router_edge(r2, r1)
net.add_bgp_neighbor(r1,
r2,
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
return net
def gen_mesh(mesh_size, asnum=None):
"""Generate a full mesh topology"""
g_phy = NetworkGraph()
for num in range(mesh_size):
node = 'R%d' % (num + 1)
g_phy.add_router(node)
if asnum:
g_phy.set_bgp_asnum(node, asnum)
for src in g_phy.nodes():
for dst in g_phy.nodes():
if src == dst:
continue
g_phy.add_router_edge(src, dst)
if asnum:
if dst not in g_phy.get_bgp_neighbors(src):
g_phy.add_bgp_neighbor(router_a=src,
router_b=dst,
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
return g_phy
def read_topology_zoo_netgraph(filename):
assert filename.endswith('.graphml'), 'wrong file type "%s"' % filename
graphml = nx.read_graphml(filename)
g = NetworkGraph()
lbl_map = {}
for node in graphml.nodes():
label = str(graphml.node[node]['label'])
# remove whitespaces
label = label.replace(' ', 'TT')
label = label.replace('/', '_')
if label == 'None':
label = 'NodeID%s' % node
if g.has_node(label):
label = '%sID%s' % (label, node)
assert not g.has_node(label), 'Duplicate node %s with label %s' % (
node, label)
lbl_map[node] = label
g.add_router(label)
for src, dst in graphml.edges():
g.add_router_edge(lbl_map[src], lbl_map[dst])
g.add_router_edge(lbl_map[dst], lbl_map[src])
return g
def ospf_net():
graph = NetworkGraph()
r1, r2, r3, r4 = 'R1', 'R2', 'R3', 'R4'
# Add routers
graph.add_router(r1)
graph.add_router(r2)
graph.add_router(r3)
graph.add_router(r4)
# Connect routers
graph.add_router_edge(r1, r2)
graph.add_router_edge(r2, r1)
graph.add_router_edge(r1, r3)
graph.add_router_edge(r3, r1)
graph.add_router_edge(r4, r2)
graph.add_router_edge(r2, r4)
graph.add_router_edge(r4, r3)
graph.add_router_edge(r3, r4)
# Enable OSPF
graph.enable_ospf(r1, 100)
graph.enable_ospf(r2, 100)
graph.enable_ospf(r3, 100)
graph.enable_ospf(r4, 100)
# Assign interfaces
graph.set_iface_names()
# Add networks
for router in graph.routers_iter():
for iface in graph.get_ifaces(router):
graph.add_ospf_network(router, iface, 0)
# Set the edge costs
graph.set_edge_ospf_cost(r1, r2, 100)
graph.set_edge_ospf_cost(r1, r3, 200)
graph.set_edge_ospf_cost(r2, r4, 50)
graph.set_edge_ospf_cost(r3, r4, 300)
# Edge costs for the reverse direction
graph.set_edge_ospf_cost(r4, r2, 100)
graph.set_edge_ospf_cost(r4, r3, 100)
graph.set_edge_ospf_cost(r2, r1, 100)
graph.set_edge_ospf_cost(r3, r1, 100)
# Synthesize connectivity
syn = ConnectedSyn(graph, full=True)
assert syn.synthesize()
# Write the configs
gns3 = GNS3Topo(graph)
tmpdir = tempfile.mkdtemp(suffix='-ospf')
gns3.write_configs(tmpdir)
print("Wrote configurations to %s" % tmpdir)
def get_fanout_topology(fan_out):
"""
Return a topology source and sink and number of fanout
routers R1, R2, ... connecting them
"""
network_graph = NetworkGraph()
for index in range(0, fan_out):
node = "R%d" % (index + 1)
network_graph.add_router(node)
source = 'source'
sink = 'sink'
network_graph.add_router(source)
network_graph.add_router(sink)
if fan_out == 0:
network_graph.add_router_edge(source, sink)
network_graph.add_router_edge(sink, source)
for index in range(0, fan_out):
node = "R%d" % (index + 1)
network_graph.add_router_edge(source, node)
network_graph.add_router_edge(node, source)
network_graph.add_router_edge(sink, node)
network_graph.add_router_edge(node, sink)
return network_graph
def get_g():
"""
Get a simple graph of 4 mesh connected graph
:return: NetworkGraph
"""
# Start with some initial inputs
# This input only define routers, interfaces, and networks
g_phy = NetworkGraph()
g_phy.add_router('R1')
g_phy.add_router('R2')
g_phy.add_router('R3')
g_phy.add_router('R4')
g_phy.enable_ospf('R1', 100)
g_phy.enable_ospf('R2', 100)
g_phy.enable_ospf('R3', 100)
g_phy.enable_ospf('R4', 100)
g_phy.add_router_edge('R1', 'R2')
g_phy.add_router_edge('R1', 'R3')
g_phy.add_router_edge('R1', 'R4')
g_phy.add_router_edge('R2', 'R1')
g_phy.add_router_edge('R2', 'R3')
g_phy.add_router_edge('R2', 'R4')
g_phy.add_router_edge('R3', 'R1')
g_phy.add_router_edge('R3', 'R2')
g_phy.add_router_edge('R3', 'R4')
g_phy.add_router_edge('R4', 'R1')
g_phy.add_router_edge('R4', 'R2')
g_phy.add_router_edge('R4', 'R3')
conn_syn = ConnectedSyn([], g_phy, full=True)
conn_syn.synthesize()
return g_phy
def two_ebgp_nodes(export_path):
"""
Two routers connected via eBGP
Very simple once router announces a single prefix and the other selects it
"""
graph = NetworkGraph()
r1, r2 = 'R1', 'R2'
graph.add_router(r1)
graph.add_router(r2)
graph.add_router_edge(r1, r2)
graph.add_router_edge(r2, r1)
# BGP configs
graph.set_bgp_asnum(r1, 100)
graph.set_bgp_asnum(r2, 200)
# Establish peering
# The actual network interfaces used for peering will be synthesized
graph.add_bgp_neighbor(r1,
r2,
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
# Some internal network
net = ip_network(u'128.0.0.0/24')
prefix = '128_0_0_0'
prefix_map = {prefix: net}
lo0 = 'lo0'
graph.set_loopback_addr(
r1, lo0, ip_interface("%s/%d" % (net.hosts().next(), net.prefixlen)))
# Announce the internal network
graph.add_bgp_announces(r1, lo0)
# The communities recognized by us
comms = [Community("100:10"), Community("100:20")]
# The announcement that will be propagated by R1
ann = Announcement(prefix=prefix,
peer=r1,
origin=BGP_ATTRS_ORIGIN.EBGP,
next_hop='R1Hop',
as_path=[100],
as_path_len=1,
local_pref=100,
med=100,
communities=dict([(c, False) for c in comms]),
permitted=True)
path = PathReq(Protocols.BGP, prefix, ['R2', 'R1'], False)
reqs = [path]
# Get SMT Context
ctx = create_context(reqs, graph, [ann])
propagation = EBGPPropagation(reqs, graph, ctx)
propagation.compute_dags()
propagation.synthesize()
# Synthesize all the interfaces and link configurations
connecte_syn = ConnectedSyn([], graph, full=True)
connecte_syn.synthesize()
# SMT Solving
solver = z3.Solver(ctx=ctx.z3_ctx)
assert ctx.check(solver) == z3.sat, solver.unsat_core()
# Update graph with the concrete values after solver
propagation.update_network_graph()
gns3 = GNS3Topo(graph=graph, prefix_map=prefix_map)
gns3.write_configs('%s/ibgp-simple' % export_path)
def test_double_import():
"""Unit test of Route maps"""
graph = NetworkGraph()
r1, r2 = 'R1', 'R2'
graph.add_router(r1)
graph.add_router(r2)
graph.add_router_edge(r1, r2)
graph.add_router_edge(r2, r1)
# BGP configs
graph.set_bgp_asnum(r1, 100)
graph.set_bgp_asnum(r2, 200)
# Establish peering
# The actual network interfaces used for peering will be synthesized
graph.add_bgp_neighbor(r1,
r2,
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
# Some internal network
net = ip_network(u'128.0.0.0/24')
prefix = '128_0_0_0'
prefix_map = {prefix: net}
lo0 = 'lo0'
graph.set_loopback_addr(
r1, lo0, ip_interface("%s/%d" % (net.hosts().next(), net.prefixlen)))
# Announce the internal network
graph.add_bgp_announces(r1, lo0)
# The communities recognized by us
comms = [Community("100:10"), Community("100:20")]
# The announcement that will be propagated by R1
ann = Announcement(prefix=prefix,
peer=r1,
origin=BGP_ATTRS_ORIGIN.EBGP,
next_hop='R1Hop',
as_path=[100],
as_path_len=1,
local_pref=100,
med=100,
communities=dict([(c, False) for c in comms]),
permitted=True)
path = PathReq(Protocols.BGP, prefix, ['R2', 'R1'], False)
reqs = [path]
ctx = create_context(reqs, graph, [ann], create_as_paths=True)
from synet.utils.fnfree_policy import SMTRouteMap
rline1 = RouteMapLine(matches=None,
actions=None,
access=VALUENOTSET,
lineno=10)
deny_line1 = RouteMapLine(matches=None,
actions=None,
access=Access.deny,
lineno=100)
rmap1 = RouteMap(name='Rmap1', lines=[rline1, deny_line1])
rline2 = RouteMapLine(matches=None,
actions=None,
access=VALUENOTSET,
lineno=10)
deny_line2 = RouteMapLine(matches=None,
actions=None,
access=Access.deny,
lineno=100)
rmap2 = RouteMap(name='Rmap1', lines=[rline2, deny_line2])
sym = get_sym([ann], ctx)
smt1 = SMTRouteMap(rmap1, sym, ctx)
smt2 = SMTRouteMap(rmap2, smt1.announcements, ctx)
print "Original permitted", sym.announcements[0].permitted
print "SMT 1 permitted", smt1.announcements[0].permitted
print "SMT 2 permitted", smt2.announcements[0].permitted
ctx.register_constraint(smt1.announcements[0].permitted.var == True)
ctx.register_constraint(smt2.announcements[0].permitted.var == False)
solver = z3.Solver(ctx=ctx.z3_ctx)
ret = ctx.check(solver)
#print solver.to_smt2()
assert ret == z3.sat, solver.unsat_core()
#print solver.model()
print "Original permitted", sym.announcements[0].permitted
print "SMT 1 permitted", smt1.announcements[0].permitted
print "SMT 2 permitted", smt2.announcements[0].permitted
def two_ebgp_nodes_route_map(export_path):
"""
Two routers connected via eBGP with route maps
Very simple one router announces a single prefix and the other selects it
"""
graph = NetworkGraph()
r1, r2 = 'R1', 'R2'
graph.add_router(r1)
graph.add_router(r2)
graph.add_router_edge(r1, r2)
graph.add_router_edge(r2, r1)
# BGP configs
graph.set_bgp_asnum(r1, 100)
graph.set_bgp_asnum(r2, 200)
# Establish peering
# The actual network interfaces used for peering will be synthesized
graph.add_bgp_neighbor(r1,
r2,
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
# Some internal network
net = ip_network(u'128.0.0.0/24')
prefix = '128_0_0_0'
prefix_map = {prefix: net}
lo0 = 'lo0'
graph.set_loopback_addr(
r1, lo0, ip_interface("%s/%d" % (net.hosts().next(), net.prefixlen)))
# Announce the internal network
graph.add_bgp_announces(r1, lo0)
# The communities recognized by us
comms = [Community("100:10"), Community("100:20")]
# The announcement that will be propagated by R1
ann = Announcement(prefix=prefix,
peer=r1,
origin=BGP_ATTRS_ORIGIN.EBGP,
next_hop='R1Hop',
as_path=[100],
as_path_len=1,
local_pref=100,
med=100,
communities=dict([(c, False) for c in comms]),
permitted=True)
path = PathReq(Protocols.BGP, prefix, ['R2', 'R1'], False)
reqs = [path]
# Create a route map to export from R1 to R2
iplist = IpPrefixList(name='IpList1',
access=Access.permit,
networks=[prefix])
graph.add_ip_prefix_list(r1, iplist)
ip_match = MatchIpPrefixListList(iplist)
set_community = ActionSetCommunity([comms[0]])
rline = RouteMapLine(matches=[ip_match],
actions=[set_community],
access=Access.permit,
lineno=10)
export_map = RouteMap(name="Export_R1_to_R2", lines=[rline])
# Register the route map
graph.add_route_map(r1, export_map)
# Set the route map as an export route map
graph.add_bgp_export_route_map(r1, r2, export_map.name)
# Create a route map to import at R2 to from R1
comm_list = CommunityList(list_id=1,
access=Access.permit,
communities=[comms[0]])
graph.add_bgp_community_list(r2, comm_list)
comm_match = MatchCommunitiesList(comm_list)
set_local_pref = ActionSetLocalPref(200)
rline = RouteMapLine(matches=[MatchNextHop(VALUENOTSET)],
actions=[set_local_pref],
access=Access.permit,
lineno=10)
import_map = RouteMap(name="Import_R2_from_R1", lines=[rline])
# Register the route map
graph.add_route_map(r2, import_map)
# Set the route map as an import route map
graph.add_bgp_import_route_map(r2, r1, import_map.name)
# Get SMT Context
ctx = create_context(reqs, graph, [ann])
propagation = EBGPPropagation(reqs, graph, ctx)
propagation.compute_dags()
propagation.synthesize()
# Synthesize all the interfaces and link configurations
connecte_syn = ConnectedSyn([], graph, full=True)
connecte_syn.synthesize()
# SMT Solving
solver = z3.Solver(ctx=ctx.z3_ctx)
assert ctx.check(solver) == z3.sat, solver.unsat_core()
# Update graph with the concrete values after solver
propagation.update_network_graph()
gns3 = GNS3Topo(graph=graph, prefix_map=prefix_map)
gns3.write_configs('%s/ebgp-route-map' % export_path)
graph.write_graphml('%s/ebgp-route-map/topology.graphml' % export_path)
def get_griffin_ibgp_graph():
"""
Returns the eBGP topology Griffin's, however
R2 is now a mesh of iBGP routers R2_0, R2_1, R2_2, R2_3
and R5 is now a mesh of iBGP routers R5_0, R5_1, R5_2, R5_3
:return: NetworkGraph
"""
net = NetworkGraph()
for i in range(1, 6):
if i in [2, 5]:
continue
name = "R%d" % i
net.add_router(name)
net.set_bgp_asnum(name, i * 100)
for i in range(4):
r2 = 'R2_%d' % i
r5 = 'R5_%d' % i
net.add_router(r2)
net.set_bgp_asnum(r2, 200)
net.add_router(r5)
net.set_bgp_asnum(r5, 500)
# Connect R2, R5 ibgp routers
for i in range(4):
for j in range(4):
if i == j:
continue
net.add_router_edge('R2_%d' % i, 'R2_%d' % j)
if set([i, j]) not in [set([0, 3]), set([1, 2])]:
net.add_router_edge('R5_%d' % i, 'R5_%d' % j)
if 'R2_%d' % i in net.get_bgp_neighbors('R2_%d' % j):
continue
net.add_bgp_neighbor('R2_%d' % i,
'R2_%d' % j,
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R5_%d' % i,
'R5_%d' % j,
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_router_edge('R1', 'R2_2')
net.add_router_edge('R2_2', 'R1')
net.add_router_edge('R1', 'R2_3')
net.add_router_edge('R2_3', 'R1')
net.add_router_edge('R1', 'R3')
net.add_router_edge('R3', 'R1')
net.add_router_edge('R1', 'R4')
net.add_router_edge('R4', 'R1')
net.add_router_edge('R2_1', 'R3')
net.add_router_edge('R3', 'R2_1')
net.add_router_edge('R2_3', 'R3')
net.add_router_edge('R3', 'R2_3')
net.add_router_edge('R2_0', 'R4')
net.add_router_edge('R4', 'R2_0')
net.add_router_edge('R3', 'R5_1')
net.add_router_edge('R5_1', 'R3')
net.add_router_edge('R4', 'R5_0')
net.add_router_edge('R5_0', 'R4')
net.add_bgp_neighbor('R1',
'R2_2',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R1',
'R2_3',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R1',
'R3',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R1',
'R4',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R2_1',
'R3',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R2_3',
'R3',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R2_0',
'R4',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R5_1',
'R3',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R5_0',
'R4',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.set_iface_names()
return net
def get_griffin_graph():
"""
Return the eBGP topology used in Griffin's papaers
:return: NetworkGraph
"""
net = NetworkGraph()
for i in range(1, 6):
name = "R%d" % i
net.add_router(name)
net.set_bgp_asnum(name, i * 100)
net.add_router_edge('R1', 'R2')
net.add_router_edge('R2', 'R1')
net.add_router_edge('R1', 'R3')
net.add_router_edge('R3', 'R1')
net.add_router_edge('R1', 'R4')
net.add_router_edge('R4', 'R1')
net.add_router_edge('R2', 'R3')
net.add_router_edge('R3', 'R2')
net.add_router_edge('R2', 'R4')
net.add_router_edge('R4', 'R2')
net.add_router_edge('R3', 'R5')
net.add_router_edge('R5', 'R3')
net.add_router_edge('R4', 'R5')
net.add_router_edge('R5', 'R4')
net.add_bgp_neighbor('R1',
'R2',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R1',
'R3',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R1',
'R4',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R2',
'R3',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R2',
'R4',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R5',
'R3',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.add_bgp_neighbor('R5',
'R4',
router_a_iface=VALUENOTSET,
router_b_iface=VALUENOTSET)
net.set_iface_names()
return net
def ibgp_net():
graph = NetworkGraph()
peer, r1, r2, r3, r4 = 'Ext', 'R1', 'R2', 'R3', 'R4'
# Add routers
graph.add_peer(peer)
graph.add_router(r1)
graph.add_router(r2)
graph.add_router(r3)
graph.add_router(r4)
# Connect routers
graph.add_peer_edge(peer, r1)
graph.add_peer_edge(r1, peer)
graph.add_router_edge(r1, r2)
graph.add_router_edge(r2, r1)
graph.add_router_edge(r1, r3)
graph.add_router_edge(r3, r1)
graph.add_router_edge(r4, r2)
graph.add_router_edge(r2, r4)
graph.add_router_edge(r4, r3)
graph.add_router_edge(r3, r4)
# Enable OSPF
graph.enable_ospf(r1, 100)
graph.enable_ospf(r2, 100)
graph.enable_ospf(r3, 100)
graph.enable_ospf(r4, 100)
# Set BGP ASN
graph.set_bgp_asnum(peer, 200)
graph.set_bgp_asnum(r1, 100)
graph.set_bgp_asnum(r2, 100)
graph.set_bgp_asnum(r3, 100)
graph.set_bgp_asnum(r4, 100)
# Establish BGP peering
graph.add_bgp_neighbor(peer, r1)
graph.add_bgp_neighbor(r1, r2)
graph.add_bgp_neighbor(r1, r3)
graph.add_bgp_neighbor(r1, r4)
graph.add_bgp_neighbor(r2, r3)
graph.add_bgp_neighbor(r2, r4)
graph.add_bgp_neighbor(r3, r4)
# Assign interfaces
graph.set_iface_names()
# Some internal to be announced network
net = ip_network(u'128.0.0.0/24')
prefix = '128_0_0_0'
lo0 = 'lo0'
prefix_map = {prefix: net}
loaddr = ip_interface("%s/%d" % (net.hosts().next(), net.prefixlen))
graph.set_loopback_addr(peer, lo0, loaddr)
graph.add_bgp_announces(peer, lo0)
# Synthesize connectivity
syn = ConnectedSyn(graph, full=True, default_ibgp_lo='lo10')
assert syn.synthesize()
# Some route map
actions = [ActionSetLocalPref(200)]
line = RouteMapLine(matches=None,
actions=actions,
access=Access.permit,
lineno=100)
route_map = RouteMap(name="ImpPolicy", lines=[line])
graph.add_route_map(r1, route_map)
graph.add_bgp_import_route_map(r1, peer, route_map.name)
# Add networks
# Note, some of the loop back interfaces where generated due to
# ibgp peering in ConnectedSyn
for router in graph.local_routers_iter():
for iface in graph.get_ifaces(router):
graph.add_ospf_network(router, iface, 0)
for lo in graph.get_loopback_interfaces(router):
graph.add_ospf_network(router, lo, 0)
# Write the configs
gns3 = GNS3Topo(graph, prefix_map=prefix_map)
gns3.write_configs('out-configs/ibgp')