def test_monitor_chain_single_update(block_processor):
# This test tests that if both threads try to add the same block to the queue, only the first one will make it
chain_monitor = ChainMonitor([Queue(), Queue()], block_processor, bitcoind_feed_params)
chain_monitor.polling_delta = 2
# We will create a block and wait for the polling thread. Then check the queues to see that the block hash has only
# been added once.
chain_monitor.monitor_chain()
chain_monitor.activate()
generate_blocks(1)
assert len(chain_monitor.receiving_queues) == 2
queue0_block = chain_monitor.receiving_queues[0].get()
queue1_block = chain_monitor.receiving_queues[1].get()
assert queue0_block == queue1_block
assert chain_monitor.receiving_queues[0].empty()
assert chain_monitor.receiving_queues[1].empty()
# The delta for polling is 2 secs, so let's wait and see
time.sleep(2)
assert chain_monitor.receiving_queues[0].empty()
assert chain_monitor.receiving_queues[1].empty()
# We can also force an update and see that it won't go through
assert chain_monitor.enqueue(queue0_block) is False
chain_monitor.terminate()
# The zmq thread needs a block generation to release from the recv method.
generate_blocks(1)
def test_monitor_chain_polling(block_processor_mock, monkeypatch):
# Monkeypatch the BlockProcessor so the best tip remains unchanged
fixed_tip = get_random_value_hex(32)
monkeypatch.setattr(block_processor_mock, "get_best_block_hash", lambda blocking: fixed_tip)
chain_monitor = ChainMonitor([Queue(), Queue()], block_processor_mock, bitcoind_feed_params)
chain_monitor.last_tips = [fixed_tip]
chain_monitor.polling_delta = 0.1
# monitor_chain_polling runs until not terminated
polling_thread = Thread(target=chain_monitor.monitor_chain_polling, daemon=True)
polling_thread.start()
# Check that nothing changes as long as a block is not generated
for _ in range(5):
assert chain_monitor.queue.empty()
time.sleep(0.1)
# And that it does if we generate a block
monkeypatch.setattr(block_processor_mock, "get_best_block_hash", lambda blocking: get_random_value_hex(32))
time.sleep(0.1)
chain_monitor.queue.get()
assert chain_monitor.queue.empty()
# Check that the bitcoind_reachable event is cleared if the connection is lost, and set once it's recovered
monkeypatch.setattr(block_processor_mock, "get_best_block_hash", mock_connection_refused_return)
time.sleep(0.5)
assert not chain_monitor.bitcoind_reachable.is_set()
monkeypatch.delattr(block_processor_mock, "get_best_block_hash")
time.sleep(0.5)
assert chain_monitor.bitcoind_reachable.is_set()
chain_monitor.terminate()
def test_monitor_chain_polling(db_manager, block_processor):
# Try polling with the Watcher
watcher_queue = Queue()
chain_monitor = ChainMonitor(watcher_queue, Queue(), block_processor,
bitcoind_feed_params)
chain_monitor.best_tip = block_processor.get_best_block_hash()
chain_monitor.polling_delta = 0.1
# monitor_chain_polling runs until terminate if set
polling_thread = Thread(target=chain_monitor.monitor_chain_polling,
daemon=True)
polling_thread.start()
# Check that nothing changes as long as a block is not generated
for _ in range(5):
assert chain_monitor.watcher_queue.empty()
time.sleep(0.1)
# And that it does if we generate a block
generate_block()
chain_monitor.watcher_queue.get()
assert chain_monitor.watcher_queue.empty()
chain_monitor.terminate = True
polling_thread.join()
def test_monitor_chain_single_update(db_manager, block_processor):
# This test tests that if both threads try to add the same block to the queue, only the first one will make it
chain_monitor = ChainMonitor(Queue(), Queue(), block_processor,
bitcoind_feed_params)
chain_monitor.best_tip = None
chain_monitor.polling_delta = 2
# We will create a block and wait for the polling thread. Then check the queues to see that the block hash has only
# been added once.
chain_monitor.monitor_chain()
generate_block()
watcher_block = chain_monitor.watcher_queue.get()
responder_block = chain_monitor.responder_queue.get()
assert watcher_block == responder_block
assert chain_monitor.watcher_queue.empty()
assert chain_monitor.responder_queue.empty()
# The delta for polling is 2 secs, so let's wait and see
time.sleep(2)
assert chain_monitor.watcher_queue.empty()
assert chain_monitor.responder_queue.empty()
# We can also force an update and see that it won't go through
assert chain_monitor.update_state(watcher_block) is False
def test_terminate(block_processor):
queue = Queue()
chain_monitor = ChainMonitor([queue, Queue()], block_processor, bitcoind_feed_params)
chain_monitor.polling_delta = 0.1
chain_monitor.monitor_chain()
chain_monitor.activate()
chain_monitor.terminate()
assert chain_monitor.status == ChainMonitorStatus.TERMINATED
# generate a new block
generate_blocks(1)
time.sleep(0.11) # wait longer than the polling_delta
# there should be only the ChainMonitor.END_MESSAGE message in the receiving queue, as the new block was generated
# after terminating
assert queue.qsize() == 1
assert queue.get() == ChainMonitor.END_MESSAGE
def test_monitor_chain_polling(block_processor):
chain_monitor = ChainMonitor([Queue(), Queue()], block_processor, bitcoind_feed_params)
chain_monitor.last_tips = [block_processor.get_best_block_hash()]
chain_monitor.polling_delta = 0.1
# monitor_chain_polling runs until not terminated
polling_thread = Thread(target=chain_monitor.monitor_chain_polling, daemon=True)
polling_thread.start()
# Check that nothing changes as long as a block is not generated
for _ in range(5):
assert chain_monitor.queue.empty()
time.sleep(0.1)
# And that it does if we generate a block
generate_blocks(1)
chain_monitor.queue.get()
assert chain_monitor.queue.empty()
chain_monitor.terminate()
def test_monitor_chain_and_activate(block_processor):
# In this test, we generate some blocks after `monitor_chain`, then `activate` and generate few more blocks.
# We verify that all the generated blocks are indeed sent to the queues in the right order.
queue1 = Queue()
queue2 = Queue()
# We add some initial blocks to the receiving queues, to simulate a bootstrap with previous information
pre_blocks = [get_random_value_hex(32) for _ in range(5)]
for block in pre_blocks:
queue1.put(block)
queue2.put(block)
# We don't activate the ChainMonitor but we start listening; therefore received blocks should accumulate in the
# internal queue
chain_monitor = ChainMonitor([queue1, queue2], block_processor, bitcoind_feed_params)
chain_monitor.polling_delta = 0.1
chain_monitor.monitor_chain()
assert chain_monitor.status == ChainMonitorStatus.LISTENING
# we generate some blocks while the monitor is listening but not active
init_blocks = generate_blocks_with_delay(3, 0.15)
time.sleep(0.11) # higher than the polling interval
chain_monitor.activate()
# generate some more blocks after activating
after_blocks = generate_blocks_with_delay(3, 0.15)
# we now check that all the blocks are in the receiving queues in the correct order
all_blocks = pre_blocks + init_blocks + after_blocks
for block in all_blocks:
assert queue1.get(timeout=0.1) == block
assert queue2.get(timeout=0.1) == block
chain_monitor.terminate()
# The zmq thread needs a block generation to release from the recv method.
generate_blocks(1)
def test_terminate(block_processor_mock, monkeypatch):
# Test that the ChainMonitor is stopped on a terminate signal
queue = Queue()
chain_monitor = ChainMonitor([queue, Queue()], block_processor_mock, bitcoind_feed_params)
chain_monitor.polling_delta = 0.1
# Activate the monitor
chain_monitor.monitor_chain()
chain_monitor.activate()
# Ask it to terminate
chain_monitor.terminate()
assert chain_monitor.status == ChainMonitorStatus.TERMINATED
# Mock generating a block generate a new block
monkeypatch.setattr(block_processor_mock, "get_best_block_hash", lambda blocking: get_random_value_hex(32))
time.sleep(0.11) # wait longer than the polling_delta
# there should be only the ChainMonitor.END_MESSAGE message in the receiving queue, as the new block was generated
# after terminating
assert queue.qsize() == 1
assert queue.get() == ChainMonitor.END_MESSAGE
def test_monitor_chain(block_processor):
# We don't activate it but we start listening; therefore received blocks should accumulate in the internal queue
chain_monitor = ChainMonitor([Queue(), Queue()], block_processor, bitcoind_feed_params)
chain_monitor.polling_delta = 0.1
chain_monitor.monitor_chain()
assert chain_monitor.status == ChainMonitorStatus.LISTENING
# The tip is updated before starting the threads, so it should have been added to last_tips.
assert len(chain_monitor.last_tips) > 0
# Blocks should be received and added to the queue
count = 0
for _ in range(5):
generate_blocks(1)
count += 1
time.sleep(0.11) # higher than the polling interval
assert chain_monitor.receiving_queues[0].empty()
assert chain_monitor.receiving_queues[1].empty()
assert chain_monitor.queue.qsize() == count
chain_monitor.terminate()
# The zmq thread needs a block generation to release from the recv method.
generate_blocks(1)