def test_main():
# Hit the exception early
try:
open_urlresource(TESTDATAURL)
except IOError:
raise TestSkipped("could not retrieve " + TESTDATAURL)
run_unittest(NormalizationTest)
def test_main():
# Hit the exception early
try:
open_urlresource(TESTDATAURL)
except IOError:
raise TestSkipped("could not retrieve " + TESTDATAURL)
run_unittest(NormalizationTest)
def test_main(self):
part = None
part1_data = {}
# Hit the exception early
try:
testdata = open_urlresource(TESTDATAURL, check_version)
except (IOError, HTTPException):
self.skipTest("Could not retrieve " + TESTDATAURL)
for line in testdata:
if '#' in line:
line = line.split('#')[0]
line = line.strip()
if not line:
continue
if line.startswith("@Part"):
part = line.split()[0]
continue
if part == "@Part3":
# XXX we don't support PRI #29 yet, so skip these tests for now
continue
try:
c1,c2,c3,c4,c5 = [unistr(x) for x in line.split(';')[:-1]]
except RangeError:
# Skip unsupported characters;
# try atleast adding c1 if we are in part1
if part == "@Part1":
try:
c1 = unistr(line.split(';')[0])
except RangeError:
pass
else:
part1_data[c1] = 1
continue
# Perform tests
self.assertTrue(c2 == NFC(c1) == NFC(c2) == NFC(c3), line)
self.assertTrue(c4 == NFC(c4) == NFC(c5), line)
self.assertTrue(c3 == NFD(c1) == NFD(c2) == NFD(c3), line)
self.assertTrue(c5 == NFD(c4) == NFD(c5), line)
self.assertTrue(c4 == NFKC(c1) == NFKC(c2) == \
NFKC(c3) == NFKC(c4) == NFKC(c5),
line)
self.assertTrue(c5 == NFKD(c1) == NFKD(c2) == \
NFKD(c3) == NFKD(c4) == NFKD(c5),
line)
# Record part 1 data
if part == "@Part1":
part1_data[c1] = 1
# Perform tests for all other data
for c in range(sys.maxunicode+1):
X = unichr(c)
if X in part1_data:
continue
self.assertTrue(X == NFC(X) == NFD(X) == NFKC(X) == NFKD(X), c)
def test_main(self):
part = None
part1_data = {}
# Hit the exception early
try:
testdata = open_urlresource(TESTDATAURL, check_version)
except (IOError, HTTPException):
self.skipTest("Could not retrieve " + TESTDATAURL)
for line in testdata:
if '#' in line:
line = line.split('#')[0]
line = line.strip()
if not line:
continue
if line.startswith("@Part"):
part = line.split()[0]
continue
if part == "@Part3":
# XXX we don't support PRI #29 yet, so skip these tests for now
continue
try:
c1,c2,c3,c4,c5 = [unistr(x) for x in line.split(';')[:-1]]
except RangeError:
# Skip unsupported characters;
# try atleast adding c1 if we are in part1
if part == "@Part1":
try:
c1 = unistr(line.split(';')[0])
except RangeError:
pass
else:
part1_data[c1] = 1
continue
# Perform tests
self.assertTrue(c2 == NFC(c1) == NFC(c2) == NFC(c3), line)
self.assertTrue(c4 == NFC(c4) == NFC(c5), line)
self.assertTrue(c3 == NFD(c1) == NFD(c2) == NFD(c3), line)
self.assertTrue(c5 == NFD(c4) == NFD(c5), line)
self.assertTrue(c4 == NFKC(c1) == NFKC(c2) == \
NFKC(c3) == NFKC(c4) == NFKC(c5),
line)
self.assertTrue(c5 == NFKD(c1) == NFKD(c2) == \
NFKD(c3) == NFKD(c4) == NFKD(c5),
line)
# Record part 1 data
if part == "@Part1":
part1_data[c1] = 1
# Perform tests for all other data
for c in range(sys.maxunicode+1):
X = unichr(c)
if X in part1_data:
continue
self.assertTrue(X == NFC(X) == NFD(X) == NFKC(X) == NFKD(X), c)
def test_main():
part1_data = {}
for line in open_urlresource(TESTDATAURL):
if '#' in line:
line = line.split('#')[0]
line = line.strip()
if not line:
continue
if line.startswith("@Part"):
part = line.split()[0]
continue
if part == "@Part3":
# XXX we don't support PRI #29 yet, so skip these tests for now
continue
try:
c1,c2,c3,c4,c5 = [unistr(x) for x in line.split(';')[:-1]]
except RangeError:
# Skip unsupported characters;
# try atleast adding c1 if we are in part1
if part == "@Part1":
try:
c1=unistr(line.split(';')[0])
except RangeError:
pass
else:
part1_data[c1] = 1
continue
if verbose:
print line
# Perform tests
verify(c2 == NFC(c1) == NFC(c2) == NFC(c3), line)
verify(c4 == NFC(c4) == NFC(c5), line)
verify(c3 == NFD(c1) == NFD(c2) == NFD(c3), line)
verify(c5 == NFD(c4) == NFD(c5), line)
verify(c4 == NFKC(c1) == NFKC(c2) == NFKC(c3) == NFKC(c4) == NFKC(c5),
line)
verify(c5 == NFKD(c1) == NFKD(c2) == NFKD(c3) == NFKD(c4) == NFKD(c5),
line)
# Record part 1 data
if part == "@Part1":
part1_data[c1] = 1
# Perform tests for all other data
for c in range(sys.maxunicode+1):
X = unichr(c)
if X in part1_data:
continue
assert X == NFC(X) == NFD(X) == NFKC(X) == NFKD(X), c
# Check for bug 834676
normalize('NFC',u'\ud55c\uae00')
def test_main():
part1_data = {}
for line in open_urlresource(TESTDATAURL):
if '#' in line:
line = line.split('#')[0]
line = line.strip()
if not line:
continue
if line.startswith("@Part"):
part = line.split()[0]
continue
if part == "@Part3":
# XXX we don't support PRI #29 yet, so skip these tests for now
continue
try:
c1, c2, c3, c4, c5 = [unistr(x) for x in line.split(';')[:-1]]
except RangeError:
# Skip unsupported characters;
# try atleast adding c1 if we are in part1
if part == "@Part1":
try:
c1 = unistr(line.split(';')[0])
except RangeError:
pass
else:
part1_data[c1] = 1
continue
if verbose:
print line
# Perform tests
verify(c2 == NFC(c1) == NFC(c2) == NFC(c3), line)
verify(c4 == NFC(c4) == NFC(c5), line)
verify(c3 == NFD(c1) == NFD(c2) == NFD(c3), line)
verify(c5 == NFD(c4) == NFD(c5), line)
verify(c4 == NFKC(c1) == NFKC(c2) == NFKC(c3) == NFKC(c4) == NFKC(c5),
line)
verify(c5 == NFKD(c1) == NFKD(c2) == NFKD(c3) == NFKD(c4) == NFKD(c5),
line)
# Record part 1 data
if part == "@Part1":
part1_data[c1] = 1
# Perform tests for all other data
for c in range(sys.maxunicode + 1):
X = unichr(c)
if X in part1_data:
continue
assert X == NFC(X) == NFD(X) == NFKC(X) == NFKD(X), c
# Check for bug 834676
normalize('NFC', u'\ud55c\uae00')
def test_main(self):
part1_data = {}
for line in open_urlresource(TESTDATAURL):
if '#' in line:
line = line.split('#')[0]
line = line.strip()
if not line:
continue
if line.startswith("@Part"):
part = line.split()[0]
continue
try:
c1,c2,c3,c4,c5 = [unistr(x) for x in line.split(';')[:-1]]
except RangeError:
# Skip unsupported characters;
# try atleast adding c1 if we are in part1
if part == "@Part1":
try:
c1 = unistr(line.split(';')[0])
except RangeError:
pass
else:
part1_data[c1] = 1
continue
# Perform tests
self.failUnless(c2 == NFC(c1) == NFC(c2) == NFC(c3), line)
self.failUnless(c4 == NFC(c4) == NFC(c5), line)
self.failUnless(c3 == NFD(c1) == NFD(c2) == NFD(c3), line)
self.failUnless(c5 == NFD(c4) == NFD(c5), line)
self.failUnless(c4 == NFKC(c1) == NFKC(c2) == \
NFKC(c3) == NFKC(c4) == NFKC(c5),
line)
self.failUnless(c5 == NFKD(c1) == NFKD(c2) == \
NFKD(c3) == NFKD(c4) == NFKD(c5),
line)
# Record part 1 data
if part == "@Part1":
part1_data[c1] = 1
# Perform tests for all other data
for c in range(sys.maxunicode+1):
X = unichr(c)
if X in part1_data:
continue
self.failUnless(X == NFC(X) == NFD(X) == NFKC(X) == NFKD(X), c)
def open_mapping_file(self):
return test_support.open_urlresource(self.mapfileurl)
def open_mapping_file(self):
return test_support.open_urlresource(self.mapfileurl)
def test_main():
# Hit the exception early
open_urlresource(TESTDATAURL)
run_unittest(NormalizationTest)
def test_main():
# Hit the exception early
open_urlresource(TESTDATAURL)
run_unittest(NormalizationTest)
