def __init__(self):
super().__init__()
self.num_nodes = 4
self.setup_clean_chain = False
self.have_ipv6 = test_ipv6_local()
# Create two proxies on different ports
# ... one unauthenticated
self.conf1 = Socks5Configuration()
self.conf1.addr = ('127.0.0.1', 13000 + (os.getpid() % 1000))
self.conf1.unauth = True
self.conf1.auth = False
# ... one supporting authenticated and unauthenticated (Tor)
self.conf2 = Socks5Configuration()
self.conf2.addr = ('127.0.0.1', 14000 + (os.getpid() % 1000))
self.conf2.unauth = True
self.conf2.auth = True
if self.have_ipv6:
# ... one on IPv6 with similar configuration
self.conf3 = Socks5Configuration()
self.conf3.af = socket.AF_INET6
self.conf3.addr = ('::1', 15000 + (os.getpid() % 1000))
self.conf3.unauth = True
self.conf3.auth = True
else:
print("Warning: testing without local IPv6 support")
self.serv1 = Socks5Server(self.conf1)
self.serv1.start()
self.serv2 = Socks5Server(self.conf2)
self.serv2.start()
if self.have_ipv6:
self.serv3 = Socks5Server(self.conf3)
self.serv3.start()
def run_test(self):
# due to OS-specific network stats queries, this test works only on Linux
if sum([self.options.run_ipv4, self.options.run_ipv6, self.options.run_nonloopback]) > 1:
raise AssertionError("Only one of --ipv4, --ipv6 and --nonloopback can be set")
self.log.info("Check for linux")
if not sys.platform.startswith('linux'):
raise SkipTest("This test can only be run on linux.")
self.log.info("Check for ipv6")
have_ipv6 = test_ipv6_local()
if not have_ipv6 and not self.options.run_ipv4:
raise SkipTest("This test requires ipv6 support.")
self.log.info("Check for non-loopback interface")
self.non_loopback_ip = None
for name,ip in all_interfaces():
if ip != '127.0.0.1':
self.non_loopback_ip = ip
break
if self.non_loopback_ip is None and self.options.run_nonloopback:
raise SkipTest("This test requires a non-loopback ip address.")
self.defaultport = rpc_port(0)
if not self.options.run_nonloopback:
self._run_loopback_tests()
if not self.options.run_ipv4 and not self.options.run_ipv6:
self._run_nonloopback_tests()
def setup_nodes(self):
self.have_ipv6 = test_ipv6_local()
# Create two proxies on different ports
# ... one unauthenticated
self.conf1 = Socks5Configuration()
self.conf1.addr = ('127.0.0.1', RANGE_BEGIN + (os.getpid() % 1000))
self.conf1.unauth = True
self.conf1.auth = False
# ... one supporting authenticated and unauthenticated (Tor)
self.conf2 = Socks5Configuration()
self.conf2.addr = (
'127.0.0.1', RANGE_BEGIN + 1000 + (os.getpid() % 1000))
self.conf2.unauth = True
self.conf2.auth = True
if self.have_ipv6:
# ... one on IPv6 with similar configuration
self.conf3 = Socks5Configuration()
self.conf3.af = socket.AF_INET6
self.conf3.addr = (
'::1', RANGE_BEGIN + 2000 + (os.getpid() % 1000))
self.conf3.unauth = True
self.conf3.auth = True
else:
self.log.warning("Testing without local IPv6 support")
self.serv1 = Socks5Server(self.conf1)
self.serv1.start()
self.serv2 = Socks5Server(self.conf2)
self.serv2.start()
if self.have_ipv6:
self.serv3 = Socks5Server(self.conf3)
self.serv3.start()
# Note: proxies are not used to connect to local nodes
# this is because the proxy to use is based on CService.GetNetwork(),
# which return NET_UNROUTABLE for localhost
args = [
['-listen', '-proxy=%s:%i' %
(self.conf1.addr), '-proxyrandomize=1'],
['-listen', '-proxy=%s:%i' %
(self.conf1.addr), '-onion=%s:%i' % (self.conf2.addr), '-proxyrandomize=0'],
['-listen', '-proxy=%s:%i' %
(self.conf2.addr), '-proxyrandomize=1'],
[]
]
if self.have_ipv6:
args[3] = ['-listen', '-proxy=[%s]:%i' %
(self.conf3.addr), '-proxyrandomize=0', '-noonion']
self.add_nodes(self.num_nodes, extra_args=args)
self.start_nodes()
def setup_nodes(self):
self.have_ipv6 = test_ipv6_local()
# Create two proxies on different ports
# ... one unauthenticated
self.conf1 = Socks5Configuration()
self.conf1.addr = ('127.0.0.1', RANGE_BEGIN + (os.getpid() % 1000))
self.conf1.unauth = True
self.conf1.auth = False
# ... one supporting authenticated and unauthenticated (Tor)
self.conf2 = Socks5Configuration()
self.conf2.addr = ('127.0.0.1', RANGE_BEGIN + 1000 + (os.getpid() % 1000))
self.conf2.unauth = True
self.conf2.auth = True
if self.have_ipv6:
# ... one on IPv6 with similar configuration
self.conf3 = Socks5Configuration()
self.conf3.af = socket.AF_INET6
self.conf3.addr = ('::1', RANGE_BEGIN + 2000 + (os.getpid() % 1000))
self.conf3.unauth = True
self.conf3.auth = True
else:
self.log.warning("Testing without local IPv6 support")
self.serv1 = Socks5Server(self.conf1)
self.serv1.start()
self.serv2 = Socks5Server(self.conf2)
self.serv2.start()
if self.have_ipv6:
self.serv3 = Socks5Server(self.conf3)
self.serv3.start()
# Note: proxies are not used to connect to local nodes
# this is because the proxy to use is based on CService.GetNetwork(), which return NET_UNROUTABLE for localhost
args = [
['-listen', '-proxy=%s:%i' % (self.conf1.addr),'-proxyrandomize=1'],
['-listen', '-proxy=%s:%i' % (self.conf1.addr),'-onion=%s:%i' % (self.conf2.addr),'-proxyrandomize=0'],
['-listen', '-proxy=%s:%i' % (self.conf2.addr),'-proxyrandomize=1'],
[]
]
if self.have_ipv6:
args[3] = ['-listen', '-proxy=[%s]:%i' % (self.conf3.addr),'-proxyrandomize=0', '-noonion']
self.add_nodes(self.num_nodes, extra_args=args)
self.start_nodes()
def run_test(self):
# due to OS-specific network stats queries, this test works only on
# Linux
if sum([self.options.run_ipv4, self.options.run_ipv6,
self.options.run_nonloopback]) > 1:
raise AssertionError(
"Only one of --ipv4, --ipv6 and --nonloopback can be set")
self.log.info("Check for linux")
if not sys.platform.startswith('linux'):
raise SkipTest("This test can only be run on linux.")
# WSL in currently not supported (refer to
# https://reviews.bitcoinabc.org/T400 for details).
# This condition should be removed once netstat support is provided by
# Microsoft.
if "microsoft" in uname().version.lower():
raise SkipTest(
"Running this test on WSL is currently not supported")
self.log.info("Check for ipv6")
have_ipv6 = test_ipv6_local()
if not have_ipv6 and not (
self.options.run_ipv4 or self.options.run_nonloopback):
raise SkipTest("This test requires ipv6 support.")
self.log.info("Check for non-loopback interface")
self.non_loopback_ip = None
for name, ip in all_interfaces():
if ip != '127.0.0.1':
self.non_loopback_ip = ip
break
if self.non_loopback_ip is None and self.options.run_nonloopback:
raise SkipTest("This test requires a non-loopback ip address.")
self.defaultport = rpc_port(0)
if not self.options.run_nonloopback:
self._run_loopback_tests()
if not self.options.run_ipv4 and not self.options.run_ipv6:
self._run_nonloopback_tests()
def __init__(self):
super().__init__()
self.num_nodes = 4
self.setup_clean_chain = False
self.have_ipv6 = test_ipv6_local()
# Create two proxies on different ports
# ... one unauthenticated
self.conf1 = Socks5Configuration()
self.conf1.addr = ('127.0.0.1', RANGE_BEGIN + (os.getpid() % 1000))
self.conf1.unauth = True
self.conf1.auth = False
# ... one supporting authenticated and unauthenticated (Tor)
self.conf2 = Socks5Configuration()
self.conf2.addr = ('127.0.0.1',
RANGE_BEGIN + 1000 + (os.getpid() % 1000))
self.conf2.unauth = True
self.conf2.auth = True
if self.have_ipv6:
# ... one on IPv6 with similar configuration
self.conf3 = Socks5Configuration()
self.conf3.af = socket.AF_INET6
self.conf3.addr = ('::1',
RANGE_BEGIN + 2000 + (os.getpid() % 1000))
self.conf3.unauth = True
self.conf3.auth = True
else:
print("Warning: testing without local IPv6 support")
self.serv1 = Socks5Server(self.conf1)
self.serv1.start()
self.serv2 = Socks5Server(self.conf2)
self.serv2.start()
if self.have_ipv6:
self.serv3 = Socks5Server(self.conf3)
self.serv3.start()
def setup_nodes(self):
self.have_ipv6 = test_ipv6_local()
# Create two proxies on different ports
# ... one unauthenticated
self.conf1 = Socks5Configuration()
self.conf1.addr = ('127.0.0.1', p2p_port(self.num_nodes))
self.conf1.unauth = True
self.conf1.auth = False
# ... one supporting authenticated and unauthenticated (Tor)
self.conf2 = Socks5Configuration()
self.conf2.addr = ('127.0.0.1', p2p_port(self.num_nodes + 1))
self.conf2.unauth = True
self.conf2.auth = True
if self.have_ipv6:
# ... one on IPv6 with similar configuration
self.conf3 = Socks5Configuration()
self.conf3.af = socket.AF_INET6
self.conf3.addr = ('::1', p2p_port(self.num_nodes + 2))
self.conf3.unauth = True
self.conf3.auth = True
else:
self.log.warning("Testing without local IPv6 support")
self.serv1 = Socks5Server(self.conf1)
self.serv1.start()
self.serv2 = Socks5Server(self.conf2)
self.serv2.start()
if self.have_ipv6:
self.serv3 = Socks5Server(self.conf3)
self.serv3.start()
# We will not try to connect to this.
self.i2p_sam = ('127.0.0.1', 7656)
# Note: proxies are not used to connect to local nodes. This is because the proxy to
# use is based on CService.GetNetwork(), which returns NET_UNROUTABLE for localhost.
args = [[
'-listen', f'-proxy={self.conf1.addr[0]}:{self.conf1.addr[1]}',
'-proxyrandomize=1'
],
[
'-listen',
f'-proxy={self.conf1.addr[0]}:{self.conf1.addr[1]}',
f'-onion={self.conf2.addr[0]}:{self.conf2.addr[1]}',
f'-i2psam={self.i2p_sam[0]}:{self.i2p_sam[1]}',
'-i2pacceptincoming=0', '-proxyrandomize=0'
],
[
'-listen',
f'-proxy={self.conf2.addr[0]}:{self.conf2.addr[1]}',
'-proxyrandomize=1'
], [],
[
'-listen',
f'-proxy={self.conf1.addr[0]}:{self.conf1.addr[1]}',
'-proxyrandomize=1', '-cjdnsreachable'
]]
if self.have_ipv6:
args[3] = [
'-listen',
f'-proxy=[{self.conf3.addr[0]}]:{self.conf3.addr[1]}',
'-proxyrandomize=0', '-noonion'
]
self.add_nodes(self.num_nodes, extra_args=args)
self.start_nodes()
