def _load_from_memory(
self,
vm: Chip8VirtualMachine,
max_register: int,
read_src: int = 0xA00,
value_start: int = 128
) -> None:
"""
Helper function that executes a bulk register save operation.
Will write value_start +0, ... value_start + max_register to
the first max_register registers.
Then runs FX55, with max_register as X.
:param vm: vm object to write to
:param max_register: the highest register that will be saved
:param value_start: what the start of the written values will be
:return:
"""
# set up the memory with values to read into registers
for register_index in range(0, max_register + 1):
vm.memory[read_src + register_index] = 128 + register_index
# set up where the registers will be stored to
vm.i_register = read_src
load_and_execute_instruction(
vm, 0xF065, x=max_register
)
def _write_values_to_memory(
self,
vm: Chip8VirtualMachine,
max_register: int,
write_dest: int = 0xA00,
value_start: int = 128
) -> None:
"""
Helper function that executes a bulk register save operation.
Will write value_start +0, ... value_start + max_register to
the first max_register registers.
Then runs FX55, with max_register as X.
:param vm: vm object to write to
:param max_register: the highest register that will be saved
:param value_start: what the start of the written values will be
:return:
"""
# set up the registers with unique values that can be checked
# for correct write order in memory.
for index in range(0, max_register + 1):
vm.v_registers[index] = value_start + index
# set up where the registers will be stored to
vm.i_register = write_dest
load_and_execute_instruction(
vm, 0xF055, x=max_register
)
def test_00e0_calls_vram_clear_screen():
"""00E0 causes VM to call screen clear on video ram"""
vm = VM()
vm.video_ram = Mock(VideoRam)
load_and_execute_instruction(vm, 0x00E0)
assert vm.video_ram.clear_screen.called_once()
def test_1nnn_jumps_to_address(memory_location):
"""1nnn sets program counter to nnn"""
vm = VM()
assert vm.program_counter == DEFAULT_EXECUTION_START
load_and_execute_instruction(vm, 0x1000, nnn=memory_location)
assert vm.program_counter == memory_location
assert vm.stack_size == 0
def test_8xy0_same_value_for_x_and_y_leaves_reg_unchanged(self, reg_index):
"""8xy0 does not alter the value when x & y are the same"""
vm = VM()
vm.v_registers[reg_index] = 5
load_and_execute_instruction(vm, 0x8000, x=reg_index, y=reg_index)
assert vm.v_registers[reg_index] == 5
def test_dxyn_sets_vf_when_turning_off_pixels(self, vm_will_draw_1_px):
"""Dxyn sets VF to 1 when overwriting a pixel"""
load_and_execute_instruction(vm_will_draw_1_px, 0xD000, n=1)
load_and_execute_instruction(vm_will_draw_1_px,
0xD000,
n=1,
load_point=0x200 + INSTRUCTION_LENGTH)
assert vm_will_draw_1_px.v_registers[0xF] == 1
def test_6xy0_skips_next_if_vx_not_equal_vy(self, x, y):
vm = VM()
vm.v_registers[x] = 0
vm.v_registers[y] = 1
load_and_execute_instruction(vm, 0x9000, x=x, y=y)
assert vm.program_counter ==\
DEFAULT_EXECUTION_START + (2 * INSTRUCTION_LENGTH)
def test_00ee_decrements_stack_size(call_location):
"""Return instruction decrements stack size"""
vm = VM()
vm.stack_call(call_location)
load_and_execute_instruction(
vm,
0x00EE, # return instruction
load_point=call_location)
assert vm.stack_size == 0
def test_00ee_returns_to_last_location_plus_two(call_location):
"""Return instruction returns to last location on the stack"""
vm = VM()
vm.stack_call(call_location)
load_and_execute_instruction(
vm,
0x00EE, # return instruction
load_point=call_location)
assert vm.program_counter == DEFAULT_EXECUTION_START + 2
def test_2nnn_sets_program_counter_and_pushes_stack(memory_location):
"""2nnn instruction jumps to location and increments stack"""
vm = VM()
assert vm.stack_size == 0
assert vm.program_counter == DEFAULT_EXECUTION_START
load_and_execute_instruction(vm, 0x2000, nnn=memory_location)
assert vm.program_counter == memory_location
assert vm.stack_top == DEFAULT_EXECUTION_START
assert vm.stack_size == 1
def test_8xy2_leaves_other_registers_alone(self, x, y):
"""8xy2 leaves registers other than VX and VY alone"""
vm = VM()
vm.v_registers[x] = 0b10101010
vm.v_registers[y] = 0b01010101
load_and_execute_instruction(vm, 0x8002, x=x, y=y)
assert other_registers_untouched(vm, (x, y))
def test_8xy6_sets_vf_to_least_significant_digit_of_vy(self, x, y, a, b):
"""8xy6 sets VF to least significant"""
vm = VM()
vm.v_registers[x] = a
vm.v_registers[y] = b
load_and_execute_instruction(vm, 0x8006, x=x, y=y)
assert vm.v_registers[0xF] == b & 1
def test_8xye_sets_vf_to_most_significant_digit_of_vy(self, x, y, a, b):
"""8xyE sets VF to most significant digit of VY"""
vm = VM()
vm.v_registers[x] = a
vm.v_registers[y] = b
load_and_execute_instruction(vm, 0x800E, x=x, y=y)
assert vm.v_registers[0xF] == bool(b & 0b10000000)
def test_8xy0_leaves_original_alone(self, x, y):
"""8xy0 leaves VY alone"""
vm = VM()
vm.v_registers[x] = 2
vm.v_registers[y] = 3
load_and_execute_instruction(vm, 0x8000, x=x, y=y)
assert other_registers_untouched(vm, {x, y})
def test_9xy0_doesnt_skip_next_if_vx_eq_vy(self, x, y, equal_val):
vm = VM()
vm.v_registers[x] = 7
vm.v_registers[y] = 7
load_and_execute_instruction(vm, 0x9000, x=x, y=y)
assert vm.program_counter ==\
DEFAULT_EXECUTION_START + INSTRUCTION_LENGTH
def test_4xkk_does_not_skip_next_instruction_if_vx_eq_kk(
self, vx: int, vx_and_kk_value: int, exec_start: int):
vm = VM(execution_start=exec_start)
vm.v_registers[vx] = vx_and_kk_value
load_and_execute_instruction(vm,
0x4000,
load_point=exec_start,
x=vx,
kk=vx_and_kk_value)
assert vm.program_counter == exec_start + INSTRUCTION_LENGTH
def test_8xy6_sets_vx_to_vy_shifted_right_one(self, x, y, a, b):
"""8xy6 sets VX = VY >> 1"""
vm = VM()
vm.v_registers[x] = a
vm.v_registers[y] = b
load_and_execute_instruction(vm, 0x8006, x=x, y=y)
assert vm.v_registers[x] == b >> 1
def test_8xy5_sets_vf_to_not_borrow(self, x, y, a, b):
"""8xy5 sets VF to 1 if VX >= VY, otherwise 0"""
vm = VM()
vm.v_registers[x] = a
if x != y:
vm.v_registers[y] = b
load_and_execute_instruction(vm, 0x8005, x=x, y=y)
assert vm.v_registers[0xF] == int(a >= b)
def test_fx07_set_vx_to_delay_timer_value(
v_register_index,
v_initial_value,
delay_timer_value
):
vm = Chip8VirtualMachine()
vm.delay_timer = delay_timer_value
load_and_execute_instruction(vm, 0xF007, x=v_register_index)
assert vm.v_registers[v_register_index] == delay_timer_value
def test_8xye_sets_vx_to_vy_shifted_left_one(self, x, y, a, b):
"""8xyE sets VX = VY >> 1"""
vm = VM()
vm.v_registers[x] = a
vm.v_registers[y] = b
load_and_execute_instruction(vm, 0x800E, x=x, y=y)
assert vm.v_registers[x] == 0xFF & (b << 1)
def test_8xy4_sets_vf_to_carry_bit(self, x, y, a, b):
"""8xy4 sets VF to 1 if VX + VY > 255, otherwise 0"""
vm = VM()
vm.v_registers[x] = a
if x != y:
vm.v_registers[y] = b
load_and_execute_instruction(vm, 0x8004, x=x, y=y)
assert vm.v_registers[0xF] == int(a + b > 255)
def test_4xkk_skips_next_instruction_if_vx_neq_kk(self, vx: int, vx_value,
kk_value, exec_start):
vm = VM(execution_start=exec_start)
vm.v_registers[vx] = vx_value
load_and_execute_instruction(
vm,
0x4000,
load_point=exec_start,
x=vx_value,
kk=kk_value,
)
assert vm.program_counter == exec_start + (2 * INSTRUCTION_LENGTH)
def test_8xy0_sets_vx_to_vy(self, x, y):
"""8xy0 sets VX = VX OR VY"""
vm = VM()
original_x_value = 2
default_y_value = 3
vm.v_registers[x] = original_x_value
vm.v_registers[y] = default_y_value
load_and_execute_instruction(vm, 0x8000, x=x, y=y)
assert vm.v_registers[x] == default_y_value
def test_8xye_leaves_other_registers_alone_unless_theyre_vf(self, x, y):
"""8xy6 leaves registers other than VX alone except for VF"""
vm = VM()
vm.v_registers[x] = 2
vm.v_registers[y] = 1
load_and_execute_instruction(vm, 0x800E, x=x, y=y)
# make sure we don't check VF since it should always be set
touched = {x, 0xF}
assert other_registers_untouched(vm, touched)
def test_8xy2_sets_vx_to_and_of_vx_and_vy(self, x, y):
"""8xy2 sets VX to VX AND VY"""
vm = VM()
left_half_filled = 0b11110000
vm.v_registers[x] = 0xFF
vm.v_registers[y] = left_half_filled
# set vx = vx AND 0x11110000. If vx is already set to 0x11110000,
# the value will still be 0x11110000 after the instruction runs.
load_and_execute_instruction(vm, 0x8002, x=x, y=y)
assert vm.v_registers[x] == left_half_filled
def test_bnnn_jumps_to_address_plus_offset(memory_location, v0):
"""Bnnn sets program counter to nnn + v0"""
vm = VM()
assert vm.program_counter == DEFAULT_EXECUTION_START
assert vm.stack_size == 0
vm.v_registers[0] = v0
load_and_execute_instruction(
vm,
0xB000,
nnn=memory_location,
)
assert vm.program_counter == memory_location + v0
assert vm.stack_size == 0
def test_8xy3_sets_vx_to_xor_of_vx_and_vy(self, x, y):
"""8xy3 sets VX to VX XOR VY"""
vm = VM()
vm.v_registers[x] = 0b10101111
vm.v_registers[y] = 0b01011111
load_and_execute_instruction(vm, 0x8003, x=x, y=y)
if x != y:
assert vm.v_registers[x] == 0b11110000
else: # any value xor itself yields zero
assert vm.v_registers[x] == 0
def test_8xy4_sets_vx_to_sum_of_vx_and_vy(self, x, y, a, b):
"""8xy4 sets VX to VX + VY, modulo 256"""
vm = VM()
vm.v_registers[x] = a
if x != y:
vm.v_registers[y] = b
load_and_execute_instruction(vm, 0x8004, x=x, y=y)
if x != y:
assert vm.v_registers[x] == (a + b) % 256
else:
assert vm.v_registers[x] == (a * 2) % 256
def test_8xy1_sets_vx_to_logical_or_of_vx_and_vy(self, x, y):
"""8xy1 sets VX = VX OR VY"""
vm = VM()
original_x_value = 0b10101010
default_y_value = 0b01010101
vm.v_registers[x] = original_x_value
if y != x:
vm.v_registers[y] = default_y_value
load_and_execute_instruction(vm, 0x8001, x=x, y=y)
if y != x:
assert vm.v_registers[x] == original_x_value | default_y_value
else:
assert vm.v_registers[x] == original_x_value
def test_8xy7_sets_vx_to_vy_minus_vx(self, x, y, a, b):
"""8xy7 sets VX = VY - VX, clamped to 0 minimum"""
vm = VM()
vm.v_registers[x] = a
if x != y:
vm.v_registers[y] = b
load_and_execute_instruction(vm, 0x8007, x=x, y=y)
if x != y:
assert vm.v_registers[x] == max(b - a, 0)
else: # any value minus itself yields zero
assert vm.v_registers[x] == 0
