def load_on():
try:
port = FakePort(fake_load_on)
tracer = Tracer(0x16)
t_ser = TracerSerial(tracer, port)
t_ser.send_command(0xAA, 0x01, 0x01)
#data = t_ser.receive_result(13)
data = t_ser.receive_result()
load_state = data.load_state
return render_template('load_on.html', load_state=load_state)
except (IndexError, IOError) as e:
return jsonify({'error': str(e)}), 503
def load_on():
try:
port = Serial('/dev/ttyAMA0', 9600, timeout=1)
tracer = Tracer(0x16)
t_ser = TracerSerial(tracer, port)
t_ser.send_command(0xAA, 0x01, 0x01)
#data = t_ser.receive_result(13)
data = t_ser.receive_result()
port.close()
load_state = data.load_state
return render_template('load_on.html', load_state=load_state)
except (IndexError, IOError) as e:
port.reset_input_buffer()
port.reset_output_buffer()
return jsonify({'error': str(e)}), 503
def get_data():
try:
port = Serial('/dev/ttyAMA0', 9600, timeout=1)
port.reset_input_buffer()
port.reset_output_buffer()
tracer = Tracer(0x16)
t_ser = TracerSerial(tracer, port)
t_ser.send_command(0xA0)
#sleep(1)
#data = t_ser.receive_result(36)
data = t_ser.receive_result()
port.close()
# operating parameters
batt_voltage = data.batt_voltage
batt_full_voltage = data.batt_full_voltage
batt_overdischarge_voltage = data.batt_overdischarge_voltage
batt_temp = data.batt_temp
pv_voltage = data.pv_voltage
charge_current = data.charge_current
load_on = data.load_on
load_amps = data.load_amps
load_overload = data.load_overload
load_short = data.load_short
batt_overdischarge = data.batt_overdischarge
batt_full = data.batt_full
batt_overload = data.batt_overload
batt_charging = data.batt_charging
return render_template('data.html',
batt_voltage=batt_voltage,
batt_full_voltage=batt_full_voltage,
batt_overdischarge_voltage=batt_overdischarge_voltage,
batt_temp=batt_temp,
pv_voltage=pv_voltage,
charge_current=charge_current,
load_on=load_on,
load_amps=load_amps,
load_overload=load_overload,
load_short=load_short,
batt_overdischarge=batt_overdischarge,
batt_full=batt_full,
batt_overload=batt_overload,
batt_charging=batt_charging)
except (IndexError, IOError) as e:
port.reset_input_buffer()
port.reset_output_buffer()
return jsonify({'error': str(e)}), 503
class TestTracerSerial(TestCase):
def setUp(self):
tracer = Tracer(16)
tracer.get_command_bytes = Mock(return_value=fixture_data)
tracer.add_crc = Mock(return_value=fixture_data)
tracer.verify_crc = Mock(return_value=True)
tracer.get_result = Mock(return_value=Command(0x12, fixture_data))
self.ts = TracerSerial(tracer, None)
def test_to_bytes(self):
command = Command(0x12)
command.decode_result = Mock()
result = self.ts.to_bytes(command)
self.assertEqual(
bytearray(b'\xAA\x55\xAA\x55\xAA\x55\xEB\x90\xEB\x90\xEB\x90' +
fixture_data), result)
def test_from_bytes(self):
result = self.ts.from_bytes(
bytearray(b'\xEB\x90\xEB\x90\xEB\x90\x00\x12\x03' + fixture_data +
b'\x00\x00\x7A'))
self.assertEqual(fixture_data, result.data)
def test_receive_result(self):
class FakePort(object):
def __init__(self, data):
self.data = data
read_idx = 0
def read(self, count=1):
result = self.data[self.read_idx:self.read_idx + count]
self.read_idx += count
return result
self.ts.port = FakePort(full_query_result)
self.ts.from_bytes = Mock(return_result=QueryResult(query_result))
# make the actual call
result = self.ts.receive_result()
self.assertNotEqual(None, result)
self.ts.from_bytes.assert_called_with(full_query_result)
def get_data():
try:
port = FakePort(fake)
tracer = Tracer(0x16)
t_ser = TracerSerial(tracer, port)
t_ser.send_command(0xA0)
#data = t_ser.receive_result(36)
data = t_ser.receive_result()
# operating parameters
batt_voltage = data.batt_voltage
batt_full_voltage = data.batt_full_voltage
batt_overdischarge_voltage = data.batt_overdischarge_voltage
batt_temp = data.batt_temp
pv_voltage = data.pv_voltage
charge_current = data.charge_current
load_on = data.load_on
load_amps = data.load_amps
load_overload = data.load_overload
load_short = data.load_short
batt_overdischarge = data.batt_overdischarge
batt_full = data.batt_full
batt_overload = data.batt_overload
batt_charging = data.batt_charging
return render_template(
'data.html',
batt_voltage=batt_voltage,
batt_full_voltage=batt_full_voltage,
batt_overdischarge_voltage=batt_overdischarge_voltage,
batt_temp=batt_temp,
pv_voltage=pv_voltage,
charge_current=charge_current,
load_on=load_on,
load_amps=load_amps,
load_overload=load_overload,
load_short=load_short,
batt_overdischarge=batt_overdischarge,
batt_full=batt_full,
batt_overload=batt_overload,
batt_charging=batt_charging)
except (IndexError, IOError) as e:
return jsonify({'error': str(e)}), 503
class TestTracerSerial(TestCase):
def setUp(self):
tracer = Tracer(16)
tracer.get_command_bytes=Mock(return_value=fixture_data)
tracer.add_crc = Mock(return_value=fixture_data)
tracer.verify_crc = Mock(return_value=True)
tracer.get_result = Mock(return_value=Command(0x12, fixture_data))
self.ts = TracerSerial(tracer, None)
def test_to_bytes(self):
command = Command(0x12)
command.decode_result = Mock()
result = self.ts.to_bytes(command)
self.assertEqual(bytearray(b'\xAA\x55\xAA\x55\xAA\x55\xEB\x90\xEB\x90\xEB\x90' + fixture_data), result)
def test_from_bytes(self):
result = self.ts.from_bytes(bytearray(b'\xEB\x90\xEB\x90\xEB\x90\x00\x12\x03' + fixture_data + b'\x00\x00\x7A'))
self.assertEqual(fixture_data, result.data)
def test_receive_result(self):
class FakePort(object):
def __init__(self, data):
self.data = data
read_idx = 0
def read(self, count=1):
result = self.data[self.read_idx:self.read_idx+count]
self.read_idx += count
return result
self.ts.port = FakePort(full_query_result)
self.ts.from_bytes = Mock(return_result=QueryResult(query_result))
# make the actual call
result = self.ts.receive_result()
self.assertNotEqual(None, result)
self.ts.from_bytes.assert_called_with(full_query_result)
import sys
sys.path.append('/home/pi/tracer/python')
from tracer import Tracer, TracerSerial, QueryCommand
port = Serial('/dev/ttyAMA0', 9600, timeout = 1)
port.flushInput()
port.flushOutput()
tracer = Tracer(0x16)
t_ser = TracerSerial(tracer, port)
query = QueryCommand()
try:
while 1:
try:
t_ser.send_command(query)
data = t_ser.receive_result()
except (IndexError, IOError) as e:
print(e)
port.flushInput()
port.flushOutput()
sleep(4)
continue
print('Battery Voltage: {0:0.1f}V'.format(data.batt_voltage))
print('Solar Panel Voltage: {0:0.1f}V'.format(data.pv_voltage))
print('Charging Current: {0:0.2f}A'.format(data.charge_current))
print('Load Current: {0:0.2f}A\n'.format(data.load_amps))
sleep(4)
except KeyboardInterrupt:
print ("\nCtrl-C pressed. Closing serial port and exiting...")
self.read_idx += count
return result
def write(self, data):
return len(data)
if not fake:
ser = serial.Serial('/dev/ttyAMA0', 9600, timeout=1)
else:
ser = FakePort(fake)
tracer = Tracer(0x16)
t_ser = TracerSerial(tracer, ser)
t_ser.send_command(0xA0)
result = t_ser.receive_result()
#print("result.data:\n", result.data)
#print(type(result.data))
#print("result:\n", result)
#print(type(result))
#data = str(result)
#print("str(result):\n", data)
#print(type(str(result)))
#for i in data:
# print(i)
print("Raw bytes: %s" % ", ".join(map(lambda a: "%0X" % (a), result.data)))
print
formatted = str(result).replace('{', '{\n')
formatted = formatted.replace('}', '\n}')
#fake = bytearray(b'\xEB\x90\xEB\x90\xEB\x90\x00\xA0\x18\xD2\x04\xD3\x04\x00\x00\x0E\x00\x53\x04\xA5\x05\x01\x00\x00\x1F\x00\x00\x00\x01\x33\x0A\x00\x00\x99\x5B\x7F')
class FakePort(object):
def __init__(self, data):
self.data = data
read_idx = 0
def read(self, count=1):
result = self.data[self.read_idx:self.read_idx+count]
self.read_idx += count
return result
def write(self, data):
return len(data)
if not fake:
ser = serial.Serial('/dev/ttyAMA0', 9600, timeout = 1)
else:
ser = FakePort(fake)
tracer = Tracer(0x16)
t_ser = TracerSerial(tracer, ser)
query = QueryCommand()
t_ser.send_command(query)
result = t_ser.receive_result()
print "Raw bytes: %s" % ", ".join(map(lambda a: "%0X" % (a), result.data))
print
formatted = str(result).replace('{', '{\n')
formatted = formatted.replace('}', '\n}')
print formatted.replace(', ', '\n')