def completor(url, specific):
use_mcm = True
up = componentInfo(mcm=use_mcm, soft=['mcm'])
if not up.check(): return
use_mcm = up.status['mcm']
if use_mcm:
mcm = McMClient(dev=False)
CI = campaignInfo()
SI = siteInfo()
UC = unifiedConfiguration()
wfs = []
wfs.extend( session.query(Workflow).filter(Workflow.status == 'away').all() )
wfs.extend( session.query(Workflow).filter(Workflow.status.startswith('assistance')).all() )
## just take it in random order so that not always the same is seen
random.shuffle( wfs )
max_per_round = UC.get('max_per_round').get('completor',None)
if max_per_round and not specific: wfs = wfs[:max_per_round]
## by workflow a list of fraction / timestamps
completions = json.loads( open('%s/completions.json'%monitor_dir).read())
good_fractions = {}
timeout = {}
for c in CI.campaigns:
if 'force-complete' in CI.campaigns[c]:
good_fractions[c] = CI.campaigns[c]['force-complete']
if 'force-timeout' in CI.campaigns[c]:
timeout[c] = CI.campaigns[c]['force-timeout']
long_lasting = {}
overrides = getForceCompletes()
if use_mcm:
## add all workflow that mcm wants to get force completed
mcm_force = mcm.get('/restapi/requests/forcecomplete')
## assuming this will be a list of actual prepids
overrides['mcm'] = mcm_force
print "can force complete on"
print json.dumps( good_fractions ,indent=2)
print json.dumps( overrides, indent=2)
max_force = UC.get("max_force_complete")
#wfs_no_location_in_GQ = set()
#block_locations = defaultdict(lambda : defaultdict(list))
#wfs_no_location_in_GQ = defaultdict(list)
set_force_complete = set()
for wfo in wfs:
if specific and not specific in wfo.name: continue
print "looking at",wfo.name
## get all of the same
wfi = workflowInfo(url, wfo.name)
pids = wfi.getPrepIDs()
skip=False
if not any([c in wfo.name for c in good_fractions]): skip=True
for user,spec in overrides.items():
if wfi.request['RequestStatus']!='force-complete':
if any(s in wfo.name for s in spec) or (wfo.name in spec) or any(pid in spec for pid in pids) or any(s in pids for s in spec):
sendEmail('force-complete requested','%s is asking for %s to be force complete'%(user,wfo.name))
wfi = workflowInfo(url, wfo.name)
forceComplete(url , wfi )
skip=True
wfi.notifyRequestor("The workflow %s was force completed by request of %s"%(wfo.name,user), do_batch=False)
wfi.sendLog('completor','%s is asking for %s to be force complete'%(user,wfo.name))
break
if wfo.status.startswith('assistance'): skip = True
if skip:
continue
priority = wfi.request['RequestPriority']
if not 'Campaign' in wfi.request: continue
if not wfi.request['RequestStatus'] in ['acquired','running-open','running-closed']: continue
c = wfi.request['Campaign']
if not c in good_fractions: continue
good_fraction = good_fractions[c]
ignore_fraction = 2.
lumi_expected = None
event_expected = None
if not 'TotalInputEvents' in wfi.request:
if 'RequestNumEvents' in wfi.request:
event_expected = wfi.request['RequestNumEvents']
else:
print "truncated, cannot do anything"
continue
else:
lumi_expected = wfi.request['TotalInputLumis']
event_expected = wfi.request['TotalInputEvents']
now = time.mktime(time.gmtime()) / (60*60*24.)
running_log = filter(lambda change : change["Status"] in ["running-open","running-closed"],wfi.request['RequestTransition'])
if not running_log:
print "\tHas no running log"
# cannot figure out when the thing started running
continue
then = running_log[-1]['UpdateTime'] / (60.*60.*24.)
delay = now - then ## in days
(w,d) = divmod(delay, 7 )
print "\t"*int(w)+"Running since",delay,"[days] priority=",priority
monitor_delay = 7
allowed_delay = 14
if c in timeout:
allowed_delay = timeout[c]
monitor_delay = min(monitor_delay, allowed_delay)
### just skip if too early
if delay <= monitor_delay: continue
long_lasting[wfo.name] = { "delay" : delay }
percent_completions = {}
for output in wfi.request['OutputDatasets']:
if "/DQM" in output: continue ## that does not count
if not output in completions: completions[output] = { 'injected' : None, 'checkpoints' : [], 'workflow' : wfo.name}
## get completion fraction
event_count,lumi_count = getDatasetEventsAndLumis(dataset=output)
lumi_completion=0.
event_completion=0.
if lumi_expected:
lumi_completion = lumi_count / float( lumi_expected )
if event_expected:
event_completion = event_count / float( event_expected )
#take the less optimistic
percent_completions[output] = min( lumi_completion, event_completion )
completions[output]['checkpoints'].append( (now, event_completion ) )
if all([percent_completions[out] >= good_fraction for out in percent_completions]):
wfi.sendLog('completor', "all is above %s \n%s"%( good_fraction,
json.dumps( percent_completions, indent=2 )
))
else:
long_lasting[wfo.name].update({
'completion': sum(percent_completions.values()) / len(percent_completions),
'completions' : percent_completions
})
## do something about the agents this workflow is in
long_lasting[wfo.name]['agents'] = wfi.getAgents()
wfi.sendLog('completor', "%s not over bound %s\n%s"%(percent_completions.values(), good_fraction,
json.dumps( long_lasting[wfo.name]['agents'], indent=2) ))
continue
if all([percent_completions[out] >= ignore_fraction for out in percent_completions]):
print "all is done, just wait a bit"
continue
for output in percent_completions:
completions[output]['injected'] = then
#further check on delays
cpuh = wfi.getComputingTime(unit='d')
ran_at = wfi.request['SiteWhitelist']
wfi.sendLog('completor',"Required %s, time spend %s"%( cpuh, delay))
##### WILL FORCE COMPLETE BELOW
# only really force complete after n days
if delay <= allowed_delay: continue
## find ACDCs that might be running
if max_force>0:
forceComplete(url, wfi )
set_force_complete.add( wfo.name )
print "going for force-complete of",wfo.name
wfi.sendLog('completor','going for force completing')
wfi.notifyRequestor("The workflow %s was force completed for running too long"% wfo.name)
max_force -=1
else:
wfi.sendLog('completor',"too many completion this round, cannot force complete")
## do it once only for testing
#break
if set_force_complete:
sendLog('completor','The followings were set force-complete \n%s'%('\n'.join(set_force_complete)))
#sendEmail('set force-complete', 'The followings were set force-complete \n%s'%('\n'.join(set_force_complete)))
open('%s/completions.json'%monitor_dir,'w').write( json.dumps( completions , indent=2))
text="These have been running for long"
open('%s/longlasting.json'%monitor_dir,'w').write( json.dumps( long_lasting, indent=2 ))
for wf,info in sorted(long_lasting.items(), key=lambda tp:tp[1]['delay'], reverse=True):
delay = info['delay']
text += "\n %s : %s days"% (wf, delay)
if 'completion' in info:
text += " %d%%"%( info['completion']*100 )
#if wfs_no_location_in_GQ:
# sendEmail('workflow with no location in GQ',"there won't be able to run anytime soon\n%s"%( '\n'.join(wfs_no_location_in_GQ)))
#sendEmail("long lasting workflow",text)
## you can check the log
print text
def checkor(url, spec=None, options=None):
if userLock(): return
if duplicateLock() and not options.go: return
fDB = closeoutInfo()
UC = unifiedConfiguration()
use_mcm = True
up = componentInfo(mcm=use_mcm, soft=['mcm'])
if not up.check(): return
use_mcm = up.status['mcm']
def time_point(label="",sub_lap=False):
now = time.mktime(time.gmtime())
nows = time.asctime(time.gmtime())
print "Time check (%s) point at : %s"%(label, nows)
print "Since start: %s [s]"% ( now - time_point.start)
if sub_lap:
print "Sub Lap : %s [s]"% ( now - time_point.sub_lap )
time_point.sub_lap = now
else:
print "Lap : %s [s]"% ( now - time_point.lap )
time_point.lap = now
time_point.sub_lap = now
time_point.sub_lap = time_point.lap = time_point.start = time.mktime(time.gmtime())
runnings = session.query(Workflow).filter(Workflow.status == 'away').all()
standings = session.query(Workflow).filter(Workflow.status.startswith('assistance')).all()
## intersect with what is actually in completed status in request manager now
all_completed = set(getWorkflows(url, 'completed' ))
wfs=[]
if options.strict:
## the one which were running and now have completed
print "strict option is on: checking workflows that freshly completed"
wfs.extend( filter(lambda wfo: wfo.name in all_completed , runnings))
if options.update:
print "update option is on: checking workflows that have not completed yet"
wfs.extend( filter(lambda wfo: not wfo.name in all_completed , runnings))
if options.clear:
print "clear option is on: checking workflows that are ready to toggle closed-out"
wfs.extend( filter(lambda wfo: 'custodial' in wfo.status, standings))
if options.review:
print "review option is on: checking the workflows that needed intervention"
wfs.extend( filter(lambda wfo: not 'custodial' in wfo.status, standings))
## what is left out are the wf which were running and ended up aborted/failed/...
custodials = defaultdict(list) #sites : dataset list
transfers = defaultdict(list) #sites : dataset list
invalidations = [] #a list of files
SI = siteInfo()
CI = campaignInfo()
mcm = McMClient(dev=False) if use_mcm else None
def get_campaign(output, wfi):
## this should be a perfect matching of output->task->campaign
campaign = None
era = None
wf_campaign = None
if 'Campaign' in wfi.request: wf_campaign = wfi.request['Campaign']
try:
era = output.split('/')[2].split('-')[0]
except:
era = None
if wfi.isRelval():
campaign = wf_campaign
else:
campaign = era if era else wf_campaign
return campaign
## retrieve bypass and onhold configuration
bypasses = []
forcings = []
overrides = getForceCompletes()
holdings = []
actors = UC.get('allowed_bypass')
for bypassor,email in actors:
bypass_file = '/afs/cern.ch/user/%s/%s/public/ops/bypass.json'%(bypassor[0],bypassor)
if not os.path.isfile(bypass_file):
#sendLog('checkor','no file %s',bypass_file)
continue
try:
bypasses.extend( json.loads(open(bypass_file).read()))
except:
sendLog('checkor',"cannot get by-passes from %s for %s"%(bypass_file ,bypassor))
sendEmail("malformated by-pass information","%s is not json readable"%(bypass_file), destination=[email])
holding_file = '/afs/cern.ch/user/%s/%s/public/ops/onhold.json'%(bypassor[0],bypassor)
if not os.path.isfile(holding_file):
#sendLog('checkor',"no file %s"%holding_file)
continue
try:
extending = json.loads(open(holding_file).read())
print bypassor,"is holding",extending
holdings.extend( extending )
except:
sendLog('checkor',"cannot get holdings from %s for %s"%(holding_file, bypassor))
sendEmail("malformated by-pass information","%s is not json readable"%(holding_file), destination=[email])
## once this was force-completed, you want to bypass
for rider,email in actors:
rider_file = '/afs/cern.ch/user/%s/%s/public/ops/forcecomplete.json'%(rider[0],rider)
if not os.path.isfile(rider_file):
print "no file",rider_file
#sendLog('checkor',"no file %s"%rider_file)
continue
try:
bypasses.extend( json.loads(open( rider_file ).read() ) )
except:
sendLog('checkor',"cannot get force complete list from %s"%rider)
sendEmail("malformated force complet file","%s is not json readable"%rider_file, destination=[email])
if use_mcm:
forcings = mcm.get('/restapi/requests/forcecomplete')
#if forcings:
# sendEmail('force completing mechanism','please check what checkor is doing with %s'%( ','.join(forcings)))
pattern_fraction_pass = UC.get('pattern_fraction_pass')
total_running_time = 5.*60.
sleep_time = 1
if len(wfs):
sleep_time = min(max(0.5, total_running_time / len(wfs)), 10)
random.shuffle( wfs )
in_manual = 0
## now you have a record of what file was invalidated globally from TT
TMDB_invalid = dataCache.get('file_invalidation')
#try:
# TMDB_invalid = set([row[3] for row in csv.reader( os.popen('curl -s "https://docs.google.com/spreadsheets/d/11fFsDOTLTtRcI4Q3gXw0GNj4ZS8IoXMoQDC3CbOo_2o/export?format=csv"'))])
# TMDB_invalid = map(lambda e : e.split(':')[-1], TMDB_invalid)
# print len(TMDB_invalid),"globally invalidated files"
#except Exception as e:
# print "TMDB not fetched"
# print str(e)
# TMDB_invalid = []
print len(wfs),"to consider, pausing for",sleep_time
max_per_round = UC.get('max_per_round').get('checkor',None)
if options.limit: max_per_round=options.limit
if max_per_round and not spec: wfs = wfs[:max_per_round]
for wfo in wfs:
if spec and not (spec in wfo.name): continue
time.sleep( sleep_time )
time_point("Starting with %s"% wfo.name)
## get info
wfi = workflowInfo(url, wfo.name)
wfi.sendLog('checkor',"checking on %s %s"%( wfo.name,wfo.status))
## make sure the wm status is up to date.
# and send things back/forward if necessary.
wfo.wm_status = wfi.request['RequestStatus']
if wfo.wm_status == 'closed-out':
## manually closed-out
wfi.sendLog('checkor',"%s is already %s, setting close"%( wfo.name , wfo.wm_status))
wfo.status = 'close'
session.commit()
continue
elif wfo.wm_status in ['failed','aborted','aborted-archived','rejected','rejected-archived','aborted-completed']:
## went into trouble
wfo.status = 'trouble'
wfi.sendLog('checkor',"%s is in trouble %s"%(wfo.name, wfo.wm_status))
session.commit()
continue
elif wfo.wm_status in ['assigned','acquired']:
## not worth checking yet
wfi.sendLog('checkor',"%s is not running yet"%wfo.name)
session.commit()
continue
if '-onhold' in wfo.status:
if wfo.name in holdings and wfo.name not in bypasses:
wfi.sendLog('checkor',"%s is on hold"%wfo.name)
continue
if wfo.wm_status != 'completed': #and not wfo.name in bypasses:
## for sure move on with closeout check if in completed
wfi.sendLog('checkor',"no need to check on %s in status %s"%(wfo.name, wfo.wm_status))
session.commit()
continue
if wfo.name in holdings and wfo.name not in bypasses:
wfo.status = 'assistance-onhold'
wfi.sendLog('checkor',"setting %s on hold"%wfo.name)
session.commit()
continue
session.commit()
#sub_assistance="" # if that string is filled, there will be need for manual assistance
existing_assistance_tags = set(wfo.status.split('-')[1:]) #[0] should be assistance
assistance_tags = set()
is_closing = True
## get it from somewhere
bypass_checks = False
for bypass in bypasses:
if bypass in wfo.name:
wfi.sendLog('checkor',"we can bypass checks on %s because of keyword %s "%( wfo.name, bypass))
bypass_checks = True
break
pids = wfi.getPrepIDs()
force_by_mcm = False
force_by_user = False
for force in forcings:
if force in pids:
wfi.sendLog('checkor',"we can bypass checks and force complete %s because of prepid %s "%( wfo.name, force))
bypass_checks = True
force_by_mcm = True
break
for user in overrides:
for force in overrides[user]:
if force in wfo.name:
wfi.sendLog('checkor',"we can bypass checks and force complete %s because of keyword %s of user %s"%( wfo.name, force, user))
bypass_checks = True
force_by_user = True
break
tiers_with_no_check = copy.deepcopy(UC.get('tiers_with_no_check')) # dqm*
vetoed_custodial_tier = copy.deepcopy(UC.get('tiers_with_no_custodial')) #dqm*, reco
to_ddm_tier = copy.deepcopy(UC.get('tiers_to_DDM'))
campaigns = {} ## this mapping of campaign per output dataset assumes era==campaing, which is not true for relval
expected_outputs = copy.deepcopy( wfi.request['OutputDatasets'] )
for out in wfi.request['OutputDatasets']:
c = get_campaign(out, wfi)
campaigns[out] = c
if c in CI.campaigns and 'custodial_override' in CI.campaigns[c]:
vetoed_custodial_tier = list(set(vetoed_custodial_tier) - set(CI.campaigns[c]['custodial_override']))
## add those that we need to check for custodial copy
tiers_with_no_check = list(set(tiers_with_no_check) - set(CI.campaigns[c]['custodial_override'])) ## would remove DQM from the vetoed check
check_output_text = "Initial outputs:"+",".join(sorted(wfi.request['OutputDatasets'] ))
wfi.request['OutputDatasets'] = [ out for out in wfi.request['OutputDatasets'] if not any([out.split('/')[-1] == veto_tier for veto_tier in tiers_with_no_check])]
check_output_text += "\nWill check on:"+",".join(sorted(wfi.request['OutputDatasets'] ))
check_output_text += "\ntiers out:"+",".join( sorted(tiers_with_no_check ))
check_output_text += "\ntiers no custodial:"+",".join( sorted(vetoed_custodial_tier) )
wfi.sendLog('checkor', check_output_text )
## anything running on acdc : getting the real prepid is not worth it
familly = getWorkflowById(url, wfi.request['PrepID'], details=True)
acdc = []
acdc_inactive = []
forced_already=False
acdc_bads = []
true_familly = []
for member in familly:
if member['RequestType'] != 'Resubmission': continue
if member['RequestName'] == wfo.name: continue
if member['RequestDate'] < wfi.request['RequestDate']: continue
if member['PrepID'] != wfi.request['PrepID'] : continue
#if 'OriginalRequestName' in member and (not 'ACDC' in member['OriginalRequestName']) and member['OriginalRequestName'] != wfo.name: continue
if member['RequestStatus'] == None: continue
if not set(member['OutputDatasets']).issubset( set(expected_outputs)):
if not member['RequestStatus'] in ['rejected-archived','rejected','aborted','aborted-archived']:
##this is not good at all
wfi.sendLog('checkor','inconsistent ACDC %s'%member['RequestName'] )
#sendLog('checkor','inconsistent ACDC %s'%member['RequestName'], level='critical')
acdc_bads.append( member['RequestName'] )
is_closing = False
assistance_tags.add('manual')
continue
true_familly.append( member['RequestName'] )
#try:
# parse_one(url, member['RequestName'])
#except:
# print "Could not make error report for",member['RequestName']
if member['RequestStatus'] in ['running-open','running-closed','assigned','acquired']:
print wfo.name,"still has an ACDC running",member['RequestName']
acdc.append( member['RequestName'] )
## cannot be bypassed!
is_closing = False
assistance_tags.add('recovering')
if (force_by_mcm or force_by_user) and not forced_already:
wfi.sendLog('checkor','%s is being forced completed while recovering'%wfo.name)
wfi.notifyRequestor("The workflow %s was force completed"% wfo.name, do_batch=False)
forceComplete(url, wfi)
forced_already=True
else:
acdc_inactive.append( member['RequestName'] )
assistance_tags.add('recovered')
if acdc_bads:
#sendEmail('inconsistent ACDC','for %s, ACDC %s is inconsistent, preventing from closing'%( wfo.name, ','.join(acdc_bads) ))
sendLog('checkor','For %s, ACDC %s is inconsistent, preventing from closing or will create a mess.'%( wfo.name, ','.join(acdc_bads) ), level='critical')
time_point("checked workflow familly", sub_lap=True)
## completion check
percent_completions = {}
if not 'TotalInputEvents' in wfi.request:
event_expected,lumi_expected = 0,0
if not 'recovery' in wfo.status:
#sendEmail("missing member of the request","TotalInputEvents is missing from the workload of %s"% wfo.name, destination=['*****@*****.**'])
sendLog('checkor',"TotalInputEvents is missing from the workload of %s"% wfo.name, level='critical')
else:
event_expected,lumi_expected = wfi.request['TotalInputEvents'],wfi.request['TotalInputLumis']
if 'RequestNumEvents' in wfi.request and int(wfi.request['RequestNumEvents']):
event_expected = int(wfi.request['RequestNumEvents'])
elif 'Task1' in wfi.request and 'RequestNumEvents' in wfi.request['Task1']:
event_expected = wfi.request['Task1']['RequestNumEvents']
for i in range(1,20):
if 'Task%d'%i in wfi.request:
## this is wrong ibsolute
if 'FilterEfficiency' in wfi.request['Task%d'%i]:
event_expected *= float(wfi.request['Task%d'%i]['FilterEfficiency'])
event_expected = int(event_expected)
fractions_pass = {}
events_per_lumi = {}
over_100_pass = False
(lhe,prim,_,_) = wfi.getIO()
if lhe or prim: over_100_pass = False
time_point("execpted statistics", sub_lap=True)
for output in wfi.request['OutputDatasets']:
event_count,lumi_count = getDatasetEventsAndLumis(dataset=output)
events_per_lumi[output] = event_count/float(lumi_count) if lumi_count else 100
percent_completions[output] = 0.
if lumi_expected:
percent_completions[output] = lumi_count / float( lumi_expected )
if event_expected:
wfi.sendLog('checkor', "event completion real %s expected %s"%(event_count, event_expected ))
percent_completions[output] = max(percent_completions[output], float(event_count) / float( event_expected ) )
default_pass = UC.get('default_fraction_pass')
fractions_pass[output] = default_pass
c = campaigns[output]
if c in CI.campaigns and 'fractionpass' in CI.campaigns[c]:
if type(CI.campaigns[c]['fractionpass']) == dict:
tier = output.split('/')[-1]
priority = str(wfi.request['RequestPriority'])
## defined per tier
fractions_pass[output] = CI.campaigns[c]['fractionpass'].get('all', default_pass)
if tier in CI.campaigns[c]['fractionpass']:
fractions_pass[output] = CI.campaigns[c]['fractionpass'][tier]
if priority in CI.campaigns[c]['fractionpass']:
fractions_pass[output] = CI.campaigns[c]['fractionpass'][priority]
else:
fractions_pass[output] = CI.campaigns[c]['fractionpass']
wfi.sendLog('checkor', "overriding fraction to %s for %s by campaign requirement"%( fractions_pass[output], output))
if options.fractionpass:
fractions_pass[output] = options.fractionpass
print "overriding fraction to",fractions_pass[output],"by command line for",output
for key in pattern_fraction_pass:
if key in output:
fractions_pass[output] = pattern_fraction_pass[key]
print "overriding fraction to",fractions_pass[output],"by dataset key",key
if not all([percent_completions[out] >= fractions_pass[out] for out in fractions_pass]):
possible_recoveries = wfi.getRecoveryDoc()
if possible_recoveries == []:
wfi.sendLog('checkor','%s has missing statistics \n%s \n%s, but nothing is recoverable. passing through to annoucement'%(
wfo.name, json.dumps(percent_completions, indent=2), json.dumps(fractions_pass, indent=2) ))
sendLog('checkor','%s is not completed, but has nothing to be recovered, passing along ?'%wfo.name, level='critical')
#sendEmail('nothing is recoverable','%s is not completed, but has nothing to be recovered, passing along ?'%wfo.name)#,destination=['*****@*****.**'])
## do not bypass for now, until Alan understands why we are loosing ACDC docs
bypass_checks = True
else:
wfi.sendLog('checkor','%s is not completed \n%s \n%s'%(
wfo.name, json.dumps(percent_completions, indent=2), json.dumps(fractions_pass, indent=2) ))
## hook for creating automatically ACDC ?
if not bypass_checks:
assistance_tags.add('recovery')
is_closing = False
if over_100_pass and any([percent_completions[out] >100 for out in fractions_pass]):
print wfo.name,"is over completed"
print json.dumps(percent_completions, indent=2)
if not bypass_checks:
assistance_tags.add('over100')
is_closing = False
time_point("checked output size", sub_lap=True)
## correct lumi < 300 event per lumi
#for output in wfi.request['OutputDatasets']:
#events_per_lumi[output] = getDatasetEventsPerLumi( output )
lumi_upper_limit = {}
for output in wfi.request['OutputDatasets']:
upper_limit = 301.
campaign = campaigns[output]
if campaign in CI.campaigns and 'lumisize' in CI.campaigns[campaign]:
upper_limit = CI.campaigns[campaign]['lumisize']
print "overriding the upper lumi size to",upper_limit,"for",campaign
if options.lumisize:
upper_limit = options.lumisize
print "overriding the upper lumi size to",upper_limit,"by command line"
lumi_upper_limit[output] = upper_limit
if wfi.request['RequestType'] in ['ReDigi','ReReco']: lumi_upper_limit[output] = -1
if any([ (lumi_upper_limit[out]>0 and events_per_lumi[out] >= lumi_upper_limit[out]) for out in events_per_lumi]):
print wfo.name,"has big lumisections"
print json.dumps(events_per_lumi, indent=2)
## hook for rejecting the request ?
if not bypass_checks:
assistance_tags.add('biglumi')
is_closing = False
any_presence = {}
for output in wfi.request['OutputDatasets']:
any_presence[output] = getDatasetPresence(url, output, vetoes=[])
time_point("checked dataset presence", sub_lap=True)
## custodial copy
custodial_locations = {}
custodial_presences = {}
for output in wfi.request['OutputDatasets']:
custodial_presences[output] = [s for s in any_presence[output] if 'MSS' in s]
custodial_locations[output] = phedexClient.getCustodialSubscriptionRequestSite(output)
if not custodial_locations[output]:
custodial_locations[output] = []
time_point("checked custodiality", sub_lap=True)
## presence in phedex
phedex_presence ={}
for output in wfi.request['OutputDatasets']:
phedex_presence[output] = phedexClient.getFileCountDataset(url, output )
time_point("checked phedex count", sub_lap=True)
out_worth_checking = [out for out in custodial_locations.keys() if out.split('/')[-1] not in vetoed_custodial_tier]
size_worth_checking = sum([getDatasetSize(out)/1023. for out in out_worth_checking ]) ## size in TBs of all outputs
size_worht_going_to_ddm = sum([getDatasetSize(out)/1023. for out in out_worth_checking if out.split('/')[-1] in to_ddm_tier ]) ## size in TBs of all outputs
if not all(map( lambda sites : len(sites)!=0, [custodial_locations[out] for out in out_worth_checking])):
print wfo.name,"has not all custodial location"
print json.dumps(custodial_locations, indent=2)
##########
## hook for making a custodial replica ?
custodial = None
## get from other outputs
for output in out_worth_checking:
if len(custodial_locations[output]):
custodial = custodial_locations[output][0]
if custodial and float(SI.storage[custodial]) < size_worth_checking:
print "cannot use the other output custodial:",custodial,"because of limited space"
custodial = None
## try to get it from campaign configuration
if not custodial:
for output in out_worth_checking:
campaign = campaigns[output]
if campaign in CI.campaigns and 'custodial' in CI.campaigns[campaign]:
custodial = CI.campaigns[campaign]['custodial']
print "Setting custodial to",custodial,"from campaign configuration"
group = None
if campaign in CI.campaigns and 'phedex_group' in CI.campaigns[campaign]:
group = CI.campaigns[campaign]['phedex_group']
print "using group",group,"for replica"
if custodial and float(SI.storage[custodial]) < size_worth_checking:
print "cannot use the campaign configuration custodial:",custodial,"because of limited space"
custodial = None
## get from the parent
pick_custodial = True
use_parent_custodial = UC.get('use_parent_custodial')
tape_size_limit = options.tape_size_limit if options.tape_size_limit else UC.get("tape_size_limit")
_,prim,_,_ = wfi.getIO()
if not custodial and prim and use_parent_custodial:
parent_dataset = prim.pop()
## this is terribly dangerous to assume only
parents_custodial = phedexClient.getCustodialSubscriptionRequestSite( parent_dataset )
###parents_custodial = findCustodialLocation(url, parent_dataset)
if not parents_custodial:
parents_custodial = []
if len(parents_custodial):
custodial = parents_custodial[0]
else:
print "the input dataset",parent_dataset,"does not have custodial in the first place. abort"
#sendEmail( "dataset has no custodial location", "Please take a look at %s in the logs of checkor"%parent_dataset)
## does not work for RAWOADSIM
sendLog('checkor',"Please take a look at %s for missing custodial location"% parent_dataset)
## cannot be bypassed, this is an issue to fix
is_closing = False
pick_custodial = False
assistance_tags.add('parentcustodial')
if custodial and float(SI.storage[custodial]) < size_worth_checking:
print "cannot use the parent custodial:",custodial,"because of limited space"
custodial = None
if not custodial and pick_custodial:
## pick one at random
custodial = SI.pick_SE(size=size_worth_checking)
if custodial and size_worht_going_to_ddm > tape_size_limit:
print wfi.sendLog('checkor',"The total output size (%s TB) is too large for the limit set (%s TB)"%( size_worth_checking, tape_size_limit))
custodial = None
if not custodial:
print "cannot find a custodial for",wfo.name
wfi.sendLog('checkor',"cannot find a custodial for %s probably because of the total output size %d"%( wfo.name, size_worth_checking))
sendLog('checkor',"cannot find a custodial for %s probably because of the total output size %d"%( wfo.name, size_worth_checking), level='critical')
if custodial and (is_closing or bypass_checks):
print "picked",custodial,"for tape copy"
## remember how much you added this round already ; this stays locally
SI.storage[custodial] -= size_worth_checking
## register the custodial request, if there are no other big issues
for output in out_worth_checking:
if not len(custodial_locations[output]):
if phedex_presence[output]>=1:
wfi.sendLog('checkor','Using %s as a tape destination for %s'%(custodial, output))
custodials[custodial].append( output )
if group: custodials[custodial][-1]+='@%s'%group
## let's wait and see if that's needed
assistance_tags.add('custodial')
else:
print "no file in phedex for",output," not good to add to custodial requests"
#cannot be bypassed
is_closing = False
time_point("determined tape location", sub_lap=True)
## disk copy
disk_copies = {}
for output in wfi.request['OutputDatasets']:
disk_copies[output] = [s for s in any_presence[output] if (not 'MSS' in s) and (not 'Buffer' in s)]
if not all(map( lambda sites : len(sites)!=0, disk_copies.values())):
print wfo.name,"has not all output on disk"
print json.dumps(disk_copies, indent=2)
## presence in dbs
dbs_presence = {}
dbs_invalid = {}
for output in wfi.request['OutputDatasets']:
dbs_presence[output] = dbs3Client.getFileCountDataset( output )
dbs_invalid[output] = dbs3Client.getFileCountDataset( output, onlyInvalid=True)
time_point("dbs file count", sub_lap=True)
if not all([dbs_presence[out] == (dbs_invalid[out]+phedex_presence[out]) for out in wfi.request['OutputDatasets']]) and not options.ignorefiles:
mismatch_notice = wfo.name+" has a dbs,phedex mismatch\n"
mismatch_notice += "in dbs\n"+json.dumps(dbs_presence, indent=2) +"\n"
mismatch_notice += "invalide in dbs\n"+json.dumps(dbs_invalid, indent=2) +"\n"
mismatch_notice += "in phedex\n"+json.dumps(phedex_presence, indent=2) +"\n"
wfi.sendLog('checkor',mismatch_notice)
if not 'recovering' in assistance_tags:
assistance_tags.add('filemismatch')
#print this for show and tell if no recovery on-going
for out in dbs_presence:
_,_,missing_phedex,missing_dbs = getDatasetFiles(url, out)
if missing_phedex:
wfi.sendLog('checkor',"These %d files are missing in phedex\n%s"%(len(missing_phedex),
"\n".join( missing_phedex )))
were_invalidated = sorted(set(missing_phedex) & set(TMDB_invalid ))
if were_invalidated:
wfi.sendLog('checkor',"These %d files were invalidated globally\n%s"%(len(were_invalidated),
"\n".join(were_invalidated)))
sendLog('checkor',"These %d files were invalidated globally\n%s\nand are invalidated in dbs"%(len(were_invalidated),
"\n".join(were_invalidated)), level='critical')
dbs3Client.setFileStatus( were_invalidated, newstatus=0 )
if missing_dbs:
wfi.sendLog('checkor',"These %d files are missing in dbs\n%s"%(len(missing_dbs),
"\n".join( missing_dbs )))
were_invalidated = sorted(set(missing_dbs) & set(TMDB_invalid ))
if were_invalidated:
wfi.sendLog('checkor',"These %d files were invalidated globally\n%s"%(len(were_invalidated),
"\n".join(were_invalidated)))
#if not bypass_checks:
## I don't think we can by pass this
is_closing = False
time_point("checked file count", sub_lap=True)
fraction_invalid = 0.20
if not all([(dbs_invalid[out] <= int(fraction_invalid*dbs_presence[out])) for out in wfi.request['OutputDatasets']]) and not options.ignoreinvalid:
print wfo.name,"has a dbs invalid file level too high"
print json.dumps(dbs_presence, indent=2)
print json.dumps(dbs_invalid, indent=2)
print json.dumps(phedex_presence, indent=2)
## need to be going and taking an eye
assistance_tags.add('invalidfiles')
if not bypass_checks:
#sub_assistance+="-invalidfiles"
is_closing = False
## put that heavy part at the end
## duplication check
duplications = {}
files_per_rl = {}
for output in wfi.request['OutputDatasets']:
duplications[output] = "skiped"
files_per_rl[output] = "skiped"
time_point("checked invalidation", sub_lap=True)
if (is_closing or bypass_checks) and (not options.ignoreduplicates):
print "starting duplicate checker for",wfo.name
for output in wfi.request['OutputDatasets']:
print "\tchecking",output
duplications[output] = True
try:
duplications[output],files_per_rl[output] = dbs3Client.duplicateRunLumiFiles( output , skipInvalid=True, verbose=True)
except:
try:
duplications[output],files_per_rl[output] = dbs3Client.duplicateRunLumiFiles( output , skipInvalid=True, verbose=True)
except Exception as e:
wfi.sendLog('checkor','Not possible to check on duplicate lumi count on %s'%(output))
sendLog('checkor','Not possible to check on duplicate lumi count on %s\n%s'%(output,str(e)),level='critical')
is_closing=False
if is_closing and any(duplications.values()) and not options.ignoreduplicates:
duplicate_notice = ""
duplicate_notice += "%s has duplicates\n"%wfo.name
duplicate_notice += json.dumps( duplications,indent=2)
duplicate_notice += '\n'
duplicate_notice += json.dumps( files_per_rl, indent=2)
wfi.sendLog('checkor',duplicate_notice)
## hook for making file invalidation ?
## it shouldn't be allowed to bypass it
assistance_tags.add('duplicates')
is_closing = False
time_point("checked duplicates", sub_lap=True)
time_point("done with %s"%wfo.name)
## for visualization later on
if not wfo.name in fDB.record:
#print "adding",wfo.name,"to close out record"
fDB.record[wfo.name] = {
'datasets' :{},
'name' : wfo.name,
'closeOutWorkflow' : None,
}
fDB.record[wfo.name]['closeOutWorkflow'] = is_closing
fDB.record[wfo.name]['priority'] = wfi.request['RequestPriority']
fDB.record[wfo.name]['prepid'] = wfi.request['PrepID']
for output in wfi.request['OutputDatasets']:
if not output in fDB.record[wfo.name]['datasets']: fDB.record[wfo.name]['datasets'][output] = {}
rec = fDB.record[wfo.name]['datasets'][output]
#rec['percentage'] = float('%.2f'%(percent_completions[output]*100))
rec['percentage'] = math.floor(percent_completions[output]*10000)/100.## round down
rec['duplicate'] = duplications[output] if output in duplications else 'N/A'
rec['phedexReqs'] = float('%.2f'%any_presence[output][custodial_presences[output][0]][1]) if len(custodial_presences[output])!=0 else 'N/A'
rec['closeOutDataset'] = is_closing
rec['transPerc'] = float('%.2f'%any_presence[output][ disk_copies[output][0]][1]) if len(disk_copies[output])!=0 else 'N/A'
rec['correctLumis'] = int(events_per_lumi[output]) if (events_per_lumi[output] > lumi_upper_limit[output]) else True
rec['missingSubs'] = False if len(custodial_locations[output])==0 else ','.join(list(set(custodial_locations[output])))
rec['dbsFiles'] = dbs_presence[output]
rec['dbsInvFiles'] = dbs_invalid[output]
rec['phedexFiles'] = phedex_presence[output]
rec['acdc'] = "%d / %d"%(len(acdc),len(acdc+acdc_inactive))
rec['familly'] = true_familly
now = time.gmtime()
rec['timestamp'] = time.mktime(now)
rec['updated'] = time.asctime(now)+' (GMT)'
## make the lumi summary
if wfi.request['RequestType'] == 'ReReco':
try:
os.system('python Unified/lumi_summary.py %s 1 > /dev/null'%(wfi.request['PrepID']))
os.system('python Unified/lumi_plot.py %s > /dev/null'%(wfi.request['PrepID']))
wfi.sendLog('checkor','Lumi summary available at %s/datalumi/lumi.%s.html'%(unified_url,wfi.request['PrepID']))
except Exception as e:
print str(e)
## make the error report
## and move on
if is_closing:
## toggle status to closed-out in request manager
wfi.sendLog('checkor',"setting %s closed-out"% wfo.name)
if not options.test:
if wfo.wm_status in ['closed-out','announced','normal-archived']:
print wfo.name,"is already",wfo.wm_status,"not trying to closed-out and assuming it does"
res = None
else:
res = reqMgrClient.closeOutWorkflowCascade(url, wfo.name)
print "close out answer",res
if not res in ["None",None]:
print "try to get the current status again"
wfi_bis = workflowInfo(url, wfo.name)
if wfi_bis.request['RequestStatus'] == 'closed-out':
print "the request did toggle to closed-out"
res = None
if not res in ["None",None]:
print "retrying to closing out"
print res
res = reqMgrClient.closeOutWorkflowCascade(url, wfo.name)
if res in [None,"None"]:
wfo.status = 'close'
session.commit()
if use_mcm and force_by_mcm:
## shoot large on all prepids, on closing the wf
for pid in pids:
mcm.delete('/restapi/requests/forcecomplete/%s'%pid)
else:
print "could not close out",wfo.name,"will try again next time"
else:
if not 'custodial' in assistance_tags or wfi.isRelval():
## do only the report for those
for member in acdc+acdc_inactive+[wfo.name]:
try:
parse_one(url, member)
except:
print "Could not make error report for",member
## full known list
#recovering # has active ACDC
##OUT #recovered #had inactive ACDC
#recovery #not over the pass bar
#over100 # over 100%
#biglumi # has a big lumiblock
#parentcustodial # the parent does not have a valid subscription yet
#custodial # has had the transfer made, is waiting for a valid custodial subscription to appear
#filemismatch # there is a dbs/phedex mismatch
#duplicates #a lumi section is there twice
## manual is not added yet, and should be so by recoveror
print wfo.name,"was tagged with :",list(assistance_tags)
if 'recovering' in assistance_tags:
## if active ACDC, being under threshold, filemismatch do not matter
assistance_tags = assistance_tags - set(['recovery','filemismatch'])
if 'recovery' in assistance_tags and 'recovered' in assistance_tags:
## should not set -recovery to anything that had ACDC already
assistance_tags = assistance_tags - set(['recovery','recovered'])
## straight to manual
assistance_tags.add('manual')
in_manual += 1
if 'recovery' in assistance_tags and 'manual' in assistance_tags:
## this is likely because something bad is happening, so leave it to manual
assistance_tags = assistance_tags - set(['recovery'])
assistance_tags.add('manual')
in_manual += 1
## that means there is something that needs to be done acdc, lumi invalidation, custodial, name it
print wfo.name,"needs assistance with",",".join( assistance_tags )
print wfo.name,"existing conditions",",".join( existing_assistance_tags )
#########################################
##### notification to requester #########
go_notify=False
if assistance_tags and not 'manual' in existing_assistance_tags and existing_assistance_tags != assistance_tags:
go_notify=True
if go_notify:
#if wfo.name in already_notified:
# print "double notification"
# sendEmail('double notification','please take a look at %s'%(wfo.name))
#else:
# already_notified.append( wfo.name )
###detailslink = 'https://cmsweb.cern.ch/reqmgr/view/details/%s'
#detailslink = 'https://cmsweb.cern.ch/reqmgr2/fetch?rid=%s'%(wfo.name)
###perflink = 'https://cmsweb.cern.ch/couchdb/workloadsummary/_design/WorkloadSummary/_show/histogramByWorkflow/%s'%(wfo.name)
perflink = '%s/report/%s'%(unified_url,wfo.name)
splitlink = 'https://cmsweb.cern.ch/reqmgr/view/splitting/%s'%(wfo.name)
## notify templates
messages= {
'recovery': 'Samples completed with missing statistics:\n%s\n%s '%( '\n'.join(['%.2f %% complete for %s'%(percent_completions[output]*100, output) for output in wfi.request['OutputDatasets'] ] ), perflink ),
'biglumi': 'Samples completed with large luminosity blocks:\n%s\n%s '%('\n'.join(['%d > %d for %s'%(events_per_lumi[output], lumi_upper_limit[output], output) for output in wfi.request['OutputDatasets'] if (events_per_lumi[output] > lumi_upper_limit[output])]), splitlink),
'duplicates': 'Samples completed with duplicated luminosity blocks:\n%s\n'%( '\n'.join(['%s'%output for output in wfi.request['OutputDatasets'] if output in duplications and duplications[output] ] ) ),
'filemismatch': 'Samples completed with inconsistency in DBS/Phedex',
#'manual' : 'Workflow completed and requires manual checks by Ops',
}
content = "The request PREPID (WORKFLOW) is facing issue in production.\n"
motive = False
for case in messages:
if case in assistance_tags:
content+= "\n"+messages[case]+"\n"
motive = True
content += "You are invited to check, while this is being taken care of by Comp-Ops.\n"
content += "This is an automated message from Comp-Ops.\n"
items_notified = set()
if use_mcm and motive:
wfi.notifyRequestor( content , mcm = mcm)
#########################################
## logic to set the status further
if assistance_tags:
new_status = 'assistance-'+'-'.join(sorted(assistance_tags) )
else:
new_status = 'assistance'
## case where the workflow was in manual from recoveror
if not 'manual' in wfo.status or new_status!='assistance-recovery':
wfo.status = new_status
if not options.test:
wfi.sendLog('checkor','setting %s to %s'%(wfo.name, wfo.status))
session.commit()
else:
print "current status is",wfo.status,"not changing to anything"
#open('already_notifified.json','w').write( json.dumps( already_notified , indent=2))
fDB.html()
if not spec and in_manual!=0:
sendEmail("fresh assistance status available","Fresh status are available at %s/assistance.html"%unified_url,destination=['*****@*****.**'])
#it's a bit annoying
pass
## custodial requests
print "Custodials"
print json.dumps(custodials, indent=2)
for site in custodials:
items_at = defaultdict(set)
for i in custodials[site]:
item, group = i.split('@') if '@' in i else (i,'DataOps')
items_at[group].add( item )
for group,items in items_at.items():
print ','.join(items),'=>',site,'@',group
if not options.test:
result = makeReplicaRequest(url, site, sorted(items) ,"custodial copy at production close-out",custodial='y',priority='low', approve = (site in SI.sites_auto_approve) , group=group)
print result
print "File Invalidation"
print invalidations
def completor(url, specific):
use_mcm = True
up = componentInfo(mcm=use_mcm, soft=['mcm'])
if not up.check(): return
use_mcm = up.status['mcm']
if use_mcm:
mcm = McMClient(dev=False)
CI = campaignInfo()
SI = siteInfo()
UC = unifiedConfiguration()
wfs = []
wfs.extend( session.query(Workflow).filter(Workflow.status == 'away').all() )
wfs.extend( session.query(Workflow).filter(Workflow.status.startswith('assistance')).all() )
## just take it in random order so that not always the same is seen
random.shuffle( wfs )
## by workflow a list of fraction / timestamps
completions = json.loads( open('%s/completions.json'%monitor_dir).read())
good_fractions = {}
timeout = {}
for c in CI.campaigns:
if 'force-complete' in CI.campaigns[c]:
good_fractions[c] = CI.campaigns[c]['force-complete']
if 'force-timeout' in CI.campaigns[c]:
timeout[c] = CI.campaigns[c]['force-timeout']
long_lasting = {}
overrides = getForceCompletes()
if use_mcm:
## add all workflow that mcm wants to get force completed
mcm_force = mcm.get('/restapi/requests/forcecomplete')
## assuming this will be a list of actual prepids
overrides['mcm'] = mcm_force
print "can force complete on"
print json.dumps( good_fractions ,indent=2)
print json.dumps( overrides, indent=2)
max_force = UC.get("max_force_complete")
#wfs_no_location_in_GQ = set()
#block_locations = defaultdict(lambda : defaultdict(list))
#wfs_no_location_in_GQ = defaultdict(list)
set_force_complete = set()
for wfo in wfs:
if specific and not specific in wfo.name: continue
print "looking at",wfo.name
## get all of the same
wfi = workflowInfo(url, wfo.name)
pids = wfi.getPrepIDs()
skip=False
if not any([c in wfo.name for c in good_fractions]): skip=True
for user,spec in overrides.items():
if wfi.request['RequestStatus']!='force-complete':
if any(s in wfo.name for s in spec) or (wfo.name in spec) or any(pid in spec for pid in pids) or any(s in pids for s in spec):
sendEmail('force-complete requested','%s is asking for %s to be force complete'%(user,wfo.name))
wfi = workflowInfo(url, wfo.name)
forceComplete(url , wfi )
skip=True
wfi.notifyRequestor("The workflow %s was force completed by request of %s"%(wfo.name,user), do_batch=False)
wfi.sendLog('completor','%s is asking for %s to be force complete'%(user,wfo.name))
if user == 'mcm' and use_mcm:
for pid in wfi.getPrepIDs():
mcm.delete('/restapi/requests/forcecomplete/%s'%pid)
#sendEmail('completor test','not force completing automatically, you have to go back to it')
#skip=False
break
if wfo.status.startswith('assistance'): skip = True
if skip:
continue
priority = wfi.request['RequestPriority']
if not 'Campaign' in wfi.request: continue
if not wfi.request['RequestStatus'] in ['acquired','running-open','running-closed']: continue
c = wfi.request['Campaign']
if not c in good_fractions: continue
good_fraction = good_fractions[c]
ignore_fraction = 2.
lumi_expected = None
event_expected = None
if not 'TotalInputEvents' in wfi.request:
if 'RequestNumEvents' in wfi.request:
event_expected = wfi.request['RequestNumEvents']
else:
print "truncated, cannot do anything"
continue
else:
lumi_expected = wfi.request['TotalInputLumis']
event_expected = wfi.request['TotalInputEvents']
now = time.mktime(time.gmtime()) / (60*60*24.)
running_log = filter(lambda change : change["Status"] in ["running-open","running-closed"],wfi.request['RequestTransition'])
if not running_log:
print "\tHas no running log"
# cannot figure out when the thing started running
continue
then = running_log[-1]['UpdateTime'] / (60.*60.*24.)
delay = now - then ## in days
(w,d) = divmod(delay, 7 )
print "\t"*int(w)+"Running since",delay,"[days] priority=",priority
monitor_delay = 7
allowed_delay = 14
if c in timeout:
allowed_delay = timeout[c]
monitor_delay = min(monitor_delay, allowed_delay)
### just skip if too early
if delay <= monitor_delay: continue
long_lasting[wfo.name] = { "delay" : delay }
percent_completions = {}
for output in wfi.request['OutputDatasets']:
if "/DQM" in output: continue ## that does not count
if not output in completions: completions[output] = { 'injected' : None, 'checkpoints' : [], 'workflow' : wfo.name}
## get completion fraction
event_count,lumi_count = getDatasetEventsAndLumis(dataset=output)
lumi_completion=0.
event_completion=0.
if lumi_expected:
lumi_completion = lumi_count / float( lumi_expected )
if event_expected:
event_completion = event_count / float( event_expected )
#take the less optimistic
percent_completions[output] = min( lumi_completion, event_completion )
completions[output]['checkpoints'].append( (now, event_completion ) )
if all([percent_completions[out] >= good_fraction for out in percent_completions]):
wfi.sendLog('completor', "all is above %s \n%s"%( good_fraction,
json.dumps( percent_completions, indent=2 )
))
else:
long_lasting[wfo.name].update({
'completion': sum(percent_completions.values()) / len(percent_completions),
'completions' : percent_completions
})
## do something about the agents this workflow is in
long_lasting[wfo.name]['agents'] = wfi.getAgents()
wfi.sendLog('completor', "%s not over bound %s\n%s"%(percent_completions.values(), good_fraction,
json.dumps( long_lasting[wfo.name]['agents'], indent=2) ))
continue
if all([percent_completions[out] >= ignore_fraction for out in percent_completions]):
print "all is done, just wait a bit"
continue
for output in percent_completions:
completions[output]['injected'] = then
#further check on delays
cpuh = wfi.getComputingTime(unit='d')
ran_at = wfi.request['SiteWhitelist']
wfi.sendLog('completor',"Required %s, time spend %s"%( cpuh, delay))
##### WILL FORCE COMPLETE BELOW
# only really force complete after n days
if delay <= allowed_delay: continue
## find ACDCs that might be running
if max_force>0:
forceComplete(url, wfi )
set_force_complete.add( wfo.name )
print "going for force-complete of",wfo.name
wfi.sendLog('completor','going for force completing')
wfi.notifyRequestor("The workflow %s was force completed for running too long"% wfo.name)
max_force -=1
else:
wfi.sendLog('completor',"too many completion this round, cannot force complete")
## do it once only for testing
#break
if set_force_complete:
sendLog('completor','The followings were set force-complete \n%s'%('\n'.join(set_force_complete)))
#sendEmail('set force-complete', 'The followings were set force-complete \n%s'%('\n'.join(set_force_complete)))
open('%s/completions.json'%monitor_dir,'w').write( json.dumps( completions , indent=2))
text="These have been running for long"
open('%s/longlasting.json'%monitor_dir,'w').write( json.dumps( long_lasting, indent=2 ))
for wf,info in sorted(long_lasting.items(), key=lambda tp:tp[1]['delay'], reverse=True):
delay = info['delay']
text += "\n %s : %s days"% (wf, delay)
if 'completion' in info:
text += " %d%%"%( info['completion']*100 )
#if wfs_no_location_in_GQ:
# sendEmail('workflow with no location in GQ',"there won't be able to run anytime soon\n%s"%( '\n'.join(wfs_no_location_in_GQ)))
#sendEmail("long lasting workflow",text)
## you can check the log
print text
def checkor(url, spec=None, options=None):
if userLock(): return
if duplicateLock(): return
fDB = closeoutInfo()
UC = unifiedConfiguration()
use_mcm = True
up = componentInfo(mcm=use_mcm, soft=['mcm'])
if not up.check(): return
use_mcm = up.status['mcm']
wfs=[]
if options.new:
## get all in running and check
## you want to intersect with what is completed !
if options.strict:
completed_wfi = getWorkflows(url, status='completed')
for wfo in session.query(Workflow).filter(Workflow.status == 'away').all():
if wfo.name in completed_wfi:
wfs.append( wfo )
else:
print wfo.name,"is not completed"
sendLog('checkor','%s is not completed'%( wfo.name))
else:
wfs.extend( session.query(Workflow).filter(Workflow.status == 'away').all() )
if options.current:
## recheck those already there, probably to just pass them along
wfs.extend( session.query(Workflow).filter(Workflow.status== 'assistance').all() )
if options.old:
## than get all in need for assistance
wfs.extend( session.query(Workflow).filter(Workflow.status.startswith('assistance-')).all() )
custodials = defaultdict(list) #sites : dataset list
transfers = defaultdict(list) #sites : dataset list
invalidations = [] #a list of files
SI = siteInfo()
CI = campaignInfo()
mcm = McMClient(dev=False)
def get_campaign(output, wfi):
campaign = None
try:
campaign = output.split('/')[2].split('-')[0]
except:
if 'Campaign' in wfi.request:
campaign = wfi.request['Campaign']
return campaign
## retrieve bypass and onhold configuration
bypasses = []
forcings = []
overrides = getForceCompletes()
holdings = []
for bypassor,email in [('vlimant','*****@*****.**'),('jen_a','*****@*****.**'),('prozober','*****@*****.**')]:
bypass_file = '/afs/cern.ch/user/%s/%s/public/ops/bypass.json'%(bypassor[0],bypassor)
if not os.path.isfile(bypass_file):
#sendLog('checkor','no file %s',bypass_file)
continue
try:
bypasses.extend( json.loads(open(bypass_file).read()))
except:
sendLog('checkor',"cannot get by-passes from %s for %s"%(bypass_file ,bypassor))
sendEmail("malformated by-pass information","%s is not json readable"%(bypass_file), destination=[email])
holding_file = '/afs/cern.ch/user/%s/%s/public/ops/onhold.json'%(bypassor[0],bypassor)
if not os.path.isfile(holding_file):
#sendLog('checkor',"no file %s"%holding_file)
continue
try:
holdings.extend( json.loads(open(holding_file).read()))
except:
sendLog('checkor',"cannot get holdings from %s for %s"%(holding_file, bypassor))
sendEmail("malformated by-pass information","%s is not json readable"%(holding_file), destination=[email])
## once this was force-completed, you want to bypass
for rider,email in [('vlimant','*****@*****.**'),('jen_a','*****@*****.**'),('srimanob','*****@*****.**')]:
rider_file = '/afs/cern.ch/user/%s/%s/public/ops/forcecomplete.json'%(rider[0],rider)
if not os.path.isfile(rider_file):
print "no file",rider_file
#sendLog('checkor',"no file %s"%rider_file)
continue
try:
bypasses.extend( json.loads(open( rider_file ).read() ) )
except:
sendLog('checkor',"cannot get force complete list from %s"%rider)
sendEmail("malformated force complet file","%s is not json readable"%rider_file, destination=[email])
if use_mcm:
forcings = mcm.get('/restapi/requests/forcecomplete')
if forcings:
sendEmail('force completing mechanism','please check what checkor is doing with %s'%( ','.join(forcings)))
pattern_fraction_pass = UC.get('pattern_fraction_pass')
total_running_time = 5.*60.
sleep_time = 1
if len(wfs):
sleep_time = min(max(0.5, total_running_time / len(wfs)), 10)
random.shuffle( wfs )
print len(wfs),"to consider, pausing for",sleep_time
max_per_round = UC.get('max_per_round').get('checkor',None)
if max_per_round and not spec: wfs = wfs[:max_per_round]
for wfo in wfs:
if spec and not (spec in wfo.name): continue
time.sleep( sleep_time )
## get info
wfi = workflowInfo(url, wfo.name)
wfi.sendLog('checkor',"checking on %s %s"%( wfo.name,wfo.status))
## make sure the wm status is up to date.
# and send things back/forward if necessary.
wfo.wm_status = wfi.request['RequestStatus']
if wfo.wm_status == 'closed-out':
## manually closed-out
wfi.sendLog('checkor',"%s is already %s, setting close"%( wfo.name , wfo.wm_status))
wfo.status = 'close'
session.commit()
continue
elif wfo.wm_status in ['failed','aborted','aborted-archived','rejected','rejected-archived','aborted-completed']:
## went into trouble
wfo.status = 'trouble'
wfi.sendLog('checkor',"%s is in trouble %s"%(wfo.name, wfo.wm_status))
session.commit()
continue
elif wfo.wm_status in ['assigned','acquired']:
## not worth checking yet
wfi.sendLog('checkor',"%s is not running yet"%wfo.name)
session.commit()
continue
if '-onhold' in wfo.status:
if wfo.name in holdings and wfo.name not in bypasses:
wfi.sendLog('checkor',"%s is on hold"%wfo.name)
continue
if wfo.wm_status != 'completed': #and not wfo.name in bypasses:
## for sure move on with closeout check if in completed
wfi.sendLog('checkor',"no need to check on %s in status %s"%(wfo.name, wfo.wm_status))
session.commit()
continue
if wfo.name in holdings and wfo.name not in bypasses:
wfo.status = 'assistance-onhold'
wfi.sendLog('checkor',"setting %s on hold"%wfo.name)
session.commit()
continue
session.commit()
#sub_assistance="" # if that string is filled, there will be need for manual assistance
existing_assistance_tags = set(wfo.status.split('-')[1:]) #[0] should be assistance
assistance_tags = set()
is_closing = True
## get it from somewhere
bypass_checks = False
for bypass in bypasses:
if bypass in wfo.name:
wfi.sendLog('checkor',"we can bypass checks on %s because of keyword %s "%( wfo.name, bypass))
bypass_checks = True
break
pids = wfi.getPrepIDs()
force_by_mcm = False
force_by_user = False
for force in forcings:
if force in pids:
wfi.sendLog('checkor',"we can bypass checks and force complete %s because of prepid %s "%( wfo.name, force))
bypass_checks = True
force_by_mcm = True
break
for user in overrides:
for force in overrides[user]:
if force in wfo.name:
wfi.sendLog('checkor',"we can bypass checks and force complete %s because of keyword %s of user %s"%( wfo.name, force, user))
bypass_checks = True
force_by_user = True
break
tiers_with_no_check = copy.deepcopy(UC.get('tiers_with_no_check')) # dqm*
vetoed_custodial_tier = copy.deepcopy(UC.get('tiers_with_no_custodial')) #dqm*, reco
campaigns = {}
expected_outputs = copy.deepcopy( wfi.request['OutputDatasets'] )
for out in wfi.request['OutputDatasets']:
c = get_campaign(out, wfi)
campaigns[out] = c
if c in CI.campaigns and 'custodial_override' in CI.campaigns[c]:
vetoed_custodial_tier = list(set(vetoed_custodial_tier) - set(CI.campaigns[c]['custodial_override']))
## add those that we need to check for custodial copy
tiers_with_no_check = list(set(tiers_with_no_check) - set(CI.campaigns[c]['custodial_override'])) ## would remove DQM from the vetoed check
check_output_text = "Initial outputs:"+",".join(sorted(wfi.request['OutputDatasets'] ))
wfi.request['OutputDatasets'] = [ out for out in wfi.request['OutputDatasets'] if not any([out.split('/')[-1] == veto_tier for veto_tier in tiers_with_no_check])]
check_output_text += "\nWill check on:"+",".join(sorted(wfi.request['OutputDatasets'] ))
check_output_text += "\ntiers out:"+",".join( sorted(tiers_with_no_check ))
check_output_text += "\ntiers no custodial:"+",".join( sorted(vetoed_custodial_tier) )
wfi.sendLog('checkor', check_output_text )
## anything running on acdc : getting the real prepid is not worth it
familly = getWorkflowById(url, wfi.request['PrepID'], details=True)
acdc = []
acdc_inactive = []
forced_already=False
acdc_bads = []
for member in familly:
if member['RequestType'] != 'Resubmission': continue
if member['RequestName'] == wfo.name: continue
if member['RequestDate'] < wfi.request['RequestDate']: continue
if 'OriginalRequestName' in member and member['OriginalRequestName'] != wfo.name: continue
if member['RequestStatus'] == None: continue
if not set(member['OutputDatasets']).issubset( set(expected_outputs)):
if not member['RequestStatus'] in ['rejected-archived','rejected','aborted','aborted-archived']:
##this is not good at all
wfi.sendLog('checkor','inconsistent ACDC %s'%member['RequestName'] )
acdc_bads.append( member['RequestName'] )
is_closing = False
assistance_tags.add('manual')
continue
if member['RequestStatus'] in ['running-open','running-closed','assigned','acquired']:
print wfo.name,"still has an ACDC running",member['RequestName']
acdc.append( member['RequestName'] )
## cannot be bypassed!
is_closing = False
assistance_tags.add('recovering')
if (force_by_mcm or force_by_user) and not forced_already:
wfi.sendLog('checkor','%s is being forced completed while recovering'%wfo.name)
wfi.notifyRequestor("The workflow %s was force completed"% wfo.name, do_batch=False)
forceComplete(url, wfi)
forced_already=True
else:
acdc_inactive.append( member['RequestName'] )
assistance_tags.add('recovered')
if acdc_bads:
sendEmail('inconsistent ACDC','for %s, ACDC %s is inconsistent, preventing from closing'%( wfo.name, ','.join(acdc_bads) ))
## completion check
percent_completions = {}
if not 'TotalInputEvents' in wfi.request:
event_expected,lumi_expected = 0,0
if not 'recovery' in wfo.status:
#sendEmail("missing member of the request","TotalInputEvents is missing from the workload of %s"% wfo.name, destination=['*****@*****.**'])
sendLog('checkor',"TotalInputEvents is missing from the workload of %s"% wfo.name, level='critical')
else:
event_expected,lumi_expected = wfi.request['TotalInputEvents'],wfi.request['TotalInputLumis']
if 'RequestNumEvents' in wfi.request and int(wfi.request['RequestNumEvents']):
event_expected = int(wfi.request['RequestNumEvents'])
elif 'Task1' in wfi.request and 'RequestNumEvents' in wfi.request['Task1']:
event_expected = wfi.request['Task1']['RequestNumEvents']
for i in range(1,20):
if 'Task%d'%i in wfi.request:
## this is wrong ibsolute
if 'FilterEfficiency' in wfi.request['Task%d'%i]:
event_expected *= float(wfi.request['Task%d'%i]['FilterEfficiency'])
event_expected = int(event_expected)
fractions_pass = {}
over_100_pass = False
(lhe,prim,_,_) = wfi.getIO()
if lhe or prim: over_100_pass = False
for output in wfi.request['OutputDatasets']:
event_count,lumi_count = getDatasetEventsAndLumis(dataset=output)
percent_completions[output] = 0.
if lumi_expected:
percent_completions[output] = lumi_count / float( lumi_expected )
if event_expected:
wfi.sendLog('checkor', "event completion real %s expected %s"%(event_count, event_expected ))
percent_completions[output] = max(percent_completions[output], float(event_count) / float( event_expected ) )
fractions_pass[output] = 0.95
c = campaigns[output]
if c in CI.campaigns and 'fractionpass' in CI.campaigns[c]:
fractions_pass[output] = CI.campaigns[c]['fractionpass']
wfi.sendLog('checkor', "overriding fraction to %s for %s by campaign requirement"%( fractions_pass[output], output))
if options.fractionpass:
fractions_pass[output] = options.fractionpass
print "overriding fraction to",fractions_pass[output],"by command line for",output
for key in pattern_fraction_pass:
if key in output:
fractions_pass[output] = pattern_fraction_pass[key]
print "overriding fraction to",fractions_pass[output],"by dataset key",key
if not all([percent_completions[out] >= fractions_pass[out] for out in fractions_pass]):
possible_recoveries = wfi.getRecoveryDoc()
if possible_recoveries == []:
wfi.sendLog('checkor','%s has missing statistics \n%s \n%s, but nothing is recoverable. passing through to annoucement'%(
wfo.name, json.dumps(percent_completions, indent=2), json.dumps(fractions_pass, indent=2) ))
sendEmail('nothing is recoverable','%s is not completed, but has nothing to be recovered, passing along ?'%wfo.name)
bypass_checks = True
else:
wfi.sendLog('checkor','%s is not completed \n%s \n%s'%(
wfo.name, json.dumps(percent_completions, indent=2), json.dumps(fractions_pass, indent=2) ))
## hook for creating automatically ACDC ?
if not bypass_checks:
assistance_tags.add('recovery')
is_closing = False
if over_100_pass and any([percent_completions[out] >100 for out in fractions_pass]):
print wfo.name,"is over completed"
print json.dumps(percent_completions, indent=2)
if not bypass_checks:
assistance_tags.add('over100')
is_closing = False
## correct lumi < 300 event per lumi
events_per_lumi = {}
for output in wfi.request['OutputDatasets']:
events_per_lumi[output] = getDatasetEventsPerLumi( output )
lumi_upper_limit = {}
for output in wfi.request['OutputDatasets']:
upper_limit = 301.
campaign = campaigns[output]
#if 'EventsPerLumi' in wfi.request and 'FilterEfficiency' in wfi.request:
# upper_limit = 1.5*wfi.request['EventsPerLumi']*wfi.request['FilterEfficiency']
# print "setting the upper limit of lumisize to",upper_limit,"by request configuration"
if campaign in CI.campaigns and 'lumisize' in CI.campaigns[campaign]:
upper_limit = CI.campaigns[campaign]['lumisize']
print "overriding the upper lumi size to",upper_limit,"for",campaign
if options.lumisize:
upper_limit = options.lumisize
print "overriding the upper lumi size to",upper_limit,"by command line"
lumi_upper_limit[output] = upper_limit
if wfi.request['RequestType'] in ['ReDigi']: lumi_upper_limit[output] = -1
if any([ (lumi_upper_limit[out]>0 and events_per_lumi[out] >= lumi_upper_limit[out]) for out in events_per_lumi]):
print wfo.name,"has big lumisections"
print json.dumps(events_per_lumi, indent=2)
## hook for rejecting the request ?
if not bypass_checks:
assistance_tags.add('biglumi')
is_closing = False
any_presence = {}
for output in wfi.request['OutputDatasets']:
any_presence[output] = getDatasetPresence(url, output, vetoes=[])
## custodial copy
custodial_locations = {}
custodial_presences = {}
for output in wfi.request['OutputDatasets']:
custodial_presences[output] = [s for s in any_presence[output] if 'MSS' in s]
custodial_locations[output] = phedexClient.getCustodialSubscriptionRequestSite(output)
if not custodial_locations[output]:
custodial_locations[output] = []
## presence in phedex
phedex_presence ={}
for output in wfi.request['OutputDatasets']:
phedex_presence[output] = phedexClient.getFileCountDataset(url, output )
out_worth_checking = [out for out in custodial_locations.keys() if out.split('/')[-1] not in vetoed_custodial_tier]
size_worth_checking = sum([getDatasetSize(out)/1023. for out in out_worth_checking ]) ## size in TBs of all outputs
if not all(map( lambda sites : len(sites)!=0, [custodial_locations[out] for out in out_worth_checking])):
print wfo.name,"has not all custodial location"
print json.dumps(custodial_locations, indent=2)
##########
## hook for making a custodial replica ?
custodial = None
## get from other outputs
for output in out_worth_checking:
if len(custodial_locations[output]):
custodial = custodial_locations[output][0]
if custodial and float(SI.storage[custodial]) < size_worth_checking:
print "cannot use the other output custodial:",custodial,"because of limited space"
custodial = None
## try to get it from campaign configuration
if not custodial:
for output in out_worth_checking:
campaign = campaigns[output]
if campaign in CI.campaigns and 'custodial' in CI.campaigns[campaign]:
custodial = CI.campaigns[campaign]['custodial']
print "Setting custodial to",custodial,"from campaign configuration"
if custodial and float(SI.storage[custodial]) < size_worth_checking:
print "cannot use the campaign configuration custodial:",custodial,"because of limited space"
custodial = None
## get from the parent
pick_custodial = True
use_parent_custodial = UC.get('use_parent_custodial')
_,prim,_,_ = wfi.getIO()
if not custodial and prim and use_parent_custodial:
parent_dataset = prim.pop()
## this is terribly dangerous to assume only
parents_custodial = phedexClient.getCustodialSubscriptionRequestSite( parent_dataset )
###parents_custodial = findCustodialLocation(url, parent_dataset)
if not parents_custodial:
parents_custodial = []
if len(parents_custodial):
custodial = parents_custodial[0]
else:
print "the input dataset",parent_dataset,"does not have custodial in the first place. abort"
#sendEmail( "dataset has no custodial location", "Please take a look at %s in the logs of checkor"%parent_dataset)
## does not work for RAWOADSIM
sendLog('checkor',"Please take a look at %s for missing custodial location"% parent_dataset)
## cannot be bypassed, this is an issue to fix
is_closing = False
pick_custodial = False
assistance_tags.add('parentcustodial')
if custodial and float(SI.storage[custodial]) < size_worth_checking:
print "cannot use the parent custodial:",custodial,"because of limited space"
custodial = None
if not custodial and pick_custodial:
## pick one at random
custodial = SI.pick_SE(size=size_worth_checking)
if not custodial:
print "cannot find a custodial for",wfo.name
wfi.sendLog('checkor',"cannot find a custodial for %s probably because of the total output size %d"%( wfo.name, size_worth_checking))
#sendEmail( "cannot find a custodial","cannot find a custodial for %s probably because of the total output size %d"%( wfo.name, size_worth_checking))
sendLog('checkor',"cannot find a custodial for %s probably because of the total output size %d"%( wfo.name, size_worth_checking), level='critical')
if custodial and (is_closing or bypass_checks):
print "picked",custodial,"for tape copy"
## remember how much you added this round already ; this stays locally
SI.storage[custodial] -= size_worth_checking
## register the custodial request, if there are no other big issues
for output in out_worth_checking:
if not len(custodial_locations[output]):
if phedex_presence[output]>=1:
custodials[custodial].append( output )
## let's wait and see if that's needed
assistance_tags.add('custodial')
else:
print "no file in phedex for",output," not good to add to custodial requests"
#cannot be bypassed
is_closing = False
## disk copy
disk_copies = {}
for output in wfi.request['OutputDatasets']:
disk_copies[output] = [s for s in any_presence[output] if (not 'MSS' in s) and (not 'Buffer' in s)]
if not all(map( lambda sites : len(sites)!=0, disk_copies.values())):
print wfo.name,"has not all output on disk"
print json.dumps(disk_copies, indent=2)
## presence in dbs
dbs_presence = {}
dbs_invalid = {}
for output in wfi.request['OutputDatasets']:
dbs_presence[output] = dbs3Client.getFileCountDataset( output )
dbs_invalid[output] = dbs3Client.getFileCountDataset( output, onlyInvalid=True)
fraction_invalid = 0.01
if not all([dbs_presence[out] == (dbs_invalid[out]+phedex_presence[out]) for out in wfi.request['OutputDatasets']]) and not options.ignorefiles:
print wfo.name,"has a dbs,phedex mismatch"
print json.dumps(dbs_presence, indent=2)
print json.dumps(dbs_invalid, indent=2)
print json.dumps(phedex_presence, indent=2)
if not 'recovering' in assistance_tags:
assistance_tags.add('filemismatch')
#print this for show and tell if no recovery on-going
for out in dbs_presence:
_,_,missing_phedex,missing_dbs = getDatasetFiles(url, out)
if missing_phedex:
wfi.sendLog('checkor',"These %d files are missing in phedex\n%s"%(len(missing_phedex),
"\n".join( missing_phedex )))
if missing_dbs:
wfi.sendLog('checkor',"These %d files are missing in dbs\n%s"%(len(missing_dbs),
"\n".join( missing_dbs )))
#if not bypass_checks:
## I don't think we can by pass this
is_closing = False
if not all([(dbs_invalid[out] <= int(fraction_invalid*dbs_presence[out])) for out in wfi.request['OutputDatasets']]) and not options.ignorefiles:
print wfo.name,"has a dbs invalid file level too high"
print json.dumps(dbs_presence, indent=2)
print json.dumps(dbs_invalid, indent=2)
print json.dumps(phedex_presence, indent=2)
## need to be going and taking an eye
assistance_tags.add('invalidfiles')
if not bypass_checks:
#sub_assistance+="-invalidfiles"
is_closing = False
## put that heavy part at the end
## duplication check
duplications = {}
if is_closing or bypass_checks:
print "starting duplicate checker for",wfo.name
for output in wfi.request['OutputDatasets']:
print "\tchecking",output
duplications[output] = True
try:
duplications[output] = dbs3Client.duplicateRunLumi( output , skipInvalid=True, verbose=True)
except:
try:
duplications[output] = dbs3Client.duplicateRunLumi( output , skipInvalid=True, verbose=True)
except:
print "was not possible to get the duplicate count for",output
is_closing=False
if any(duplications.values()) and not options.ignoreduplicates:
print wfo.name,"has duplicates"
print json.dumps(duplications,indent=2)
## hook for making file invalidation ?
## it shouldn't be allowed to bypass it
assistance_tags.add('duplicates')
is_closing = False
## for visualization later on
if not wfo.name in fDB.record:
#print "adding",wfo.name,"to close out record"
fDB.record[wfo.name] = {
'datasets' :{},
'name' : wfo.name,
'closeOutWorkflow' : None,
}
fDB.record[wfo.name]['closeOutWorkflow'] = is_closing
fDB.record[wfo.name]['priority'] = wfi.request['RequestPriority']
fDB.record[wfo.name]['prepid'] = wfi.request['PrepID']
for output in wfi.request['OutputDatasets']:
if not output in fDB.record[wfo.name]['datasets']: fDB.record[wfo.name]['datasets'][output] = {}
rec = fDB.record[wfo.name]['datasets'][output]
rec['percentage'] = float('%.2f'%(percent_completions[output]*100))
rec['duplicate'] = duplications[output] if output in duplications else 'N/A'
rec['phedexReqs'] = float('%.2f'%any_presence[output][custodial_presences[output][0]][1]) if len(custodial_presences[output])!=0 else 'N/A'
rec['closeOutDataset'] = is_closing
rec['transPerc'] = float('%.2f'%any_presence[output][ disk_copies[output][0]][1]) if len(disk_copies[output])!=0 else 'N/A'
rec['correctLumis'] = int(events_per_lumi[output]) if (events_per_lumi[output] > lumi_upper_limit[output]) else True
rec['missingSubs'] = False if len(custodial_locations[output])==0 else ','.join(list(set(custodial_locations[output])))
rec['dbsFiles'] = dbs_presence[output]
rec['dbsInvFiles'] = dbs_invalid[output]
rec['phedexFiles'] = phedex_presence[output]
rec['acdc'] = "%d / %d"%(len(acdc),len(acdc+acdc_inactive))
now = time.gmtime()
rec['timestamp'] = time.mktime(now)
rec['updated'] = time.asctime(now)+' (GMT)'
## and move on
if is_closing:
## toggle status to closed-out in request manager
print "setting",wfo.name,"closed-out"
if not options.test:
if wfo.wm_status in ['closed-out','announced','normal-archived']:
print wfo.name,"is already",wfo.wm_status,"not trying to closed-out and assuming it does"
res = None
else:
res = reqMgrClient.closeOutWorkflowCascade(url, wfo.name)
print "close out answer",res
if not res in ["None",None]:
print "try to get the current status again"
wfi_bis = workflowInfo(url, wfo.name)
if wfi_bis.request['RequestStatus'] == 'closed-out':
print "the request did toggle to closed-out"
res = None
if not res in ["None",None]:
print "retrying to closing out"
print res
res = reqMgrClient.closeOutWorkflowCascade(url, wfo.name)
if res in [None,"None"]:
wfo.status = 'close'
session.commit()
if use_mcm and force_by_mcm:
## shoot large on all prepids, on closing the wf
for pid in pids:
mcm.delete('/restapi/requests/forcecomplete/%s'%pid)
else:
print "could not close out",wfo.name,"will try again next time"
else:
## full known list
#recovering # has active ACDC
##OUT #recovered #had inactive ACDC
#recovery #not over the pass bar
#over100 # over 100%
#biglumi # has a big lumiblock
#parentcustodial # the parent does not have a valid subscription yet
#custodial # has had the transfer made, is waiting for a valid custodial subscription to appear
#filemismatch # there is a dbs/phedex mismatch
#duplicates #a lumi section is there twice
## manual is not added yet, and should be so by recoveror
print wfo.name,"was tagged with :",list(assistance_tags)
if 'recovering' in assistance_tags:
## if active ACDC, being under threshold, filemismatch do not matter
assistance_tags = assistance_tags - set(['recovery','filemismatch'])
if 'recovery' in assistance_tags and 'recovered' in assistance_tags:
## should not set -recovery to anything that add ACDC already
assistance_tags = assistance_tags - set(['recovery','recovered'])
## straight to manual
assistance_tags.add('manual')
## that means there is something that needs to be done acdc, lumi invalidation, custodial, name it
print wfo.name,"needs assistance with",",".join( assistance_tags )
print wfo.name,"existing conditions",",".join( existing_assistance_tags )
#########################################
##### notification to requester #########
go_notify=False
if assistance_tags and not 'manual' in existing_assistance_tags and existing_assistance_tags != assistance_tags:
go_notify=True
if go_notify:
#if wfo.name in already_notified:
# print "double notification"
# sendEmail('double notification','please take a look at %s'%(wfo.name))
#else:
# already_notified.append( wfo.name )
detailslink = 'https://cmsweb.cern.ch/reqmgr/view/details/%s'
perflink = 'https://cmsweb.cern.ch/couchdb/workloadsummary/_design/WorkloadSummary/_show/histogramByWorkflow/%s'%(wfo.name)
splitlink = 'https://cmsweb.cern.ch/reqmgr/view/splitting/%s'%(wfo.name)
## notify templates
messages= {
'recovery': 'Samples completed with missing statistics:\n%s\n%s '%( '\n'.join(['%.2f %% complete for %s'%(percent_completions[output]*100, output) for output in wfi.request['OutputDatasets'] ] ), perflink ),
'biglumi': 'Samples completed with large luminosity blocks:\n%s\n%s '%('\n'.join(['%d > %d for %s'%(events_per_lumi[output], lumi_upper_limit[output], output) for output in wfi.request['OutputDatasets'] if (events_per_lumi[output] > lumi_upper_limit[output])]), splitlink),
'duplicates': 'Samples completed with duplicated luminosity blocks:\n%s\n'%( '\n'.join(['%s'%output for output in wfi.request['OutputDatasets'] if output in duplications and duplications[output] ] ) ),
'filemismatch': 'Samples completed with inconsistency in DBS/Phedex',
#'manual' : 'Workflow completed and requires manual checks by Ops',
}
content = "The request PREPID (WORKFLOW) is facing issue in production.\n"
motive = False
for case in messages:
if case in assistance_tags:
content+= "\n"+messages[case]+"\n"
motive = True
content += "You are invited to check, while this is being taken care of by Comp-Ops.\n"
content += "This is an automated message from Comp-Ops.\n"
items_notified = set()
if use_mcm and motive:
wfi.notifyRequestor( content , mcm = mcm)
#########################################
## logic to set the status further
if assistance_tags:
new_status = 'assistance-'+'-'.join(sorted(assistance_tags) )
else:
new_status = 'assistance'
## case where the workflow was in manual from recoveror
if not 'manual' in wfo.status or new_status!='assistance-recovery':
wfo.status = new_status
if not options.test:
print "setting",wfo.name,"to",wfo.status
session.commit()
else:
print "current status is",wfo.status,"not changing to anything"
#open('already_notifified.json','w').write( json.dumps( already_notified , indent=2))
fDB.html()
if not spec:
#sendEmail("fresh assistance status available","Fresh status are available at https://cmst2.web.cern.ch/cmst2/unified/assistance.html",destination=['*****@*****.**'])
#it's a bit annoying
pass
## custodial requests
print "Custodials"
print json.dumps(custodials, indent=2)
for site in custodials:
print ','.join(custodials[site]),'=>',site
if not options.test:
result = makeReplicaRequest(url, site, list(set(custodials[site])),"custodial copy at production close-out",custodial='y',priority='low', approve = (site in SI.sites_auto_approve) )
print result
print "Transfers"
print json.dumps(transfers, indent=2)
## replicas requests
for site in transfers:
print ','.join(transfers[site]),'=>',site
if not options.test:
result = None
#result = makeReplicaRequest(url, site, list(set(transfers[site])),"copy to disk at production close-out")
print result
print "File Invalidation"
print invalidations
def completor(url, specific):
use_mcm = True
up = componentInfo(soft=['mcm','wtc'])
if not up.check(): return
use_mcm = up.status['mcm']
if use_mcm:
mcm = McMClient(dev=False)
mlock = moduleLock(silent=True)
if mlock(): return
safe_mode = False
CI = campaignInfo()
SI = siteInfo()
UC = unifiedConfiguration()
wfs = []
wfs.extend( session.query(Workflow).filter(Workflow.status == 'away').all() )
wfs.extend( session.query(Workflow).filter(Workflow.status.startswith('assistance')).all() )
## just take it in random order so that not always the same is seen
random.shuffle( wfs )
max_per_round = UC.get('max_per_round').get('completor',None)
if max_per_round and not specific: wfs = wfs[:max_per_round]
all_stuck = set()
## take into account what stagor was saying
for itry in range(5):
try:
all_stuck.update( json.loads( eosRead('%s/stuck_transfers.json'%monitor_pub_dir)))
break
except:
time.sleep(2)
for itry in range(5):
try:
## take into account the block that needed to be repositioned recently
all_stuck.update( [b.split('#')[0] for b in json.loads( eosRead('%s/missing_blocks.json'%monitor_dir)) ] )
break
except:
time.sleep(2)
## take into account all stuck block and dataset from transfer team
all_stuck.update( getAllStuckDataset())
## by workflow a list of fraction / timestamps
#old_completions = json.loads( open('%s/completions.json'%monitor_dir).read())
#completions = defaultdict(dict)
#for old in old_completions:
# completions[old] = old_completions[old]
good_fractions = {}
overdoing_fractions = {}
truncate_fractions = {}
timeout = {}
campaign_injection_delay = {}
for c in CI.campaigns:
if 'force-complete' in CI.campaigns[c]:
good_fractions[c] = CI.campaigns[c]['force-complete']
if 'truncate-complete' in CI.campaigns[c]:
truncate_fractions[c] = CI.campaigns[c]['truncate-complete']
if 'force-timeout' in CI.campaigns[c]:
timeout[c] = CI.campaigns[c]['force-timeout']
if 'injection-delay' in CI.campaigns[c]:
campaign_injection_delay[c] = CI.campaigns[c]['injection-delay']
if 'overdoing-complete' in CI.campaigns[c]:
overdoing_fractions[c] = CI.campaigns[c]['overdoing-complete']
long_lasting = {}
overrides = getForceCompletes()
if use_mcm:
## add all workflow that mcm wants to get force completed
mcm_force = mcm.get('/restapi/requests/forcecomplete')
## assuming this will be a list of actual prepids
overrides['mcm'] = mcm_force
print "can force complete on"
print json.dumps( good_fractions ,indent=2)
print "can truncate complete on"
print json.dumps( truncate_fractions ,indent=2)
print "can overide on"
print json.dumps( overrides, indent=2)
max_force = UC.get("max_force_complete")
max_priority = UC.get("max_tail_priority")
injection_delay_threshold = UC.get("injection_delay_threshold")
injection_delay_priority = UC.get("injection_delay_priority")
delay_priority_increase = UC.get("delay_priority_increase")
default_fraction_overdoing = UC.get('default_fraction_overdoing')
set_force_complete = set()
for wfo in wfs:
if specific and not specific in wfo.name: continue
print "looking at",wfo.name
## get all of the same
wfi = workflowInfo(url, wfo.name)
pids = wfi.getPrepIDs()
skip=False
campaigns = wfi.getCampaigns()
#if not any([c in good_fractions.keys() for c in campaigns]): skip=True
#if not any([c in truncate_fractions.keys() for c in campaigns]): skip=True
for user,spec in overrides.items():
if not spec: continue
spec = filter(None, spec)
if not wfi.request['RequestStatus'] in ['force-complete', 'completed']:
if any(s in wfo.name for s in spec) or (wfo.name in spec) or any(pid in spec for pid in pids) or any(s in pids for s in spec):
wfi = workflowInfo(url, wfo.name)
forceComplete(url , wfi )
skip=True
wfi.notifyRequestor("The workflow %s was force completed by request of %s"%(wfo.name,user), do_batch=False)
wfi.sendLog('completor','%s is asking for %s to be force complete'%(user,wfo.name))
break
if wfo.status.startswith('assistance'): skip = True
if skip:
continue
priority = wfi.request['RequestPriority']
if not 'Campaign' in wfi.request: continue
if not wfi.request['RequestStatus'] in ['acquired','running-open','running-closed']: continue
## until we can map the output to task ...
output_per_task = wfi.getOutputPerTask() ## can use that one, and follow mapping
good_fraction_per_out = {}
good_fraction_nodelay_per_out = {}
truncate_fraction_per_out = {}
#allowed_delay_per_out = {}
for task,outs in output_per_task.items():
task_campaign = wfi.getCampaignPerTask( task )
for out in outs:
good_fraction_per_out[out] = good_fractions.get(task_campaign,1000.)
good_fraction_nodelay_per_out[out] = overdoing_fractions.get(task_campaign,default_fraction_overdoing)
truncate_fraction_per_out[out] = truncate_fractions.get(task_campaign,1000.)
#allowed_delay_per_out[out] = timeout.get(task_campaign, 14)
#print "force at", json.dumps( good_fraction_per_out, indent=2)
#print "truncate at",json.dumps( truncate_fraction_per_out, indent=2)
now = time.mktime(time.gmtime()) / (60*60*24.)
running_log = filter(lambda change : change["Status"] in ["running-open","running-closed"],wfi.request['RequestTransition'])
if not running_log:
print "\tHas no running log"
delay = 0
else:
then = running_log[-1]['UpdateTime'] / (60.*60.*24.)
delay = now - then ## in days
## this is supposed to be the very initial request date, inherited from clones
injection_delay = None
original = wfi
if 'OriginalRequestName' in original.request:
## go up the clone chain
original = workflowInfo(url, original.request['OriginalRequestName'])
injected_log = filter(lambda change : change["Status"] in ["assignment-approved"],original.request['RequestTransition'])
if injected_log:
injected_on = injected_log[-1]['UpdateTime'] / (60.*60.*24.)
injection_delay = now - injected_on
delay_for_priority_increase = injection_delay
#delay_for_priority_increase = delay
(w,d) = divmod(delay, 7 )
print "\t"*int(w)+"Running since",delay,"[days] priority=",priority
if delay_for_priority_increase!=None and delay_for_priority_increase > injection_delay_threshold and priority >= injection_delay_priority:
quantized = 5000 ## quantize priority
tail_cutting_priority = wfi.request['InitialPriority']+ int((delay_priority_increase * (delay_for_priority_increase - injection_delay_threshold) / 7) / quantized) * quantized
tail_cutting_priority += 101 ## to signal it is from this mechanism
tail_cutting_priority = min(400000, tail_cutting_priority) ## never go above 400k priority
tail_cutting_priority = max(tail_cutting_priority, priority) ## never go below the current value
if priority < tail_cutting_priority:
if max_priority:
sendLog('completor',"%s Injected since %s [days] priority=%s, increasing to %s"%(wfo.name,delay_for_priority_increase,priority, tail_cutting_priority), level='critical')
wfi.sendLog('completor','bumping priority to %d for being injected since %s'%( tail_cutting_priority, delay_for_priority_increase))
reqMgrClient.changePriorityWorkflow(url, wfo.name, tail_cutting_priority)
max_priority-=1
else:
sendLog('completor',"%s Injected since %s [days] priority=%s, would like to increase to %s"%(wfo.name,delay_for_priority_increase,priority, tail_cutting_priority), level='critical')
wfi.sendLog('completor','would like to bump priority to %d for being injected since %s'%( tail_cutting_priority, delay_for_priority_increase))
print "Could be changing the priority to higher value, but too many already were done"
_,prim,_,_ = wfi.getIO()
is_stuck = all_stuck & prim
if is_stuck: wfi.sendLog('completor','%s is stuck'%','.join(is_stuck))
monitor_delay = 7
allowed_delay = max([timeout.get(c,14) for c in campaigns])
monitor_delay = min(monitor_delay, allowed_delay)
### just skip if too early, just for the sake of not computing the completion fraction just now.
# maybe this is fast enough that we can do it for all
if delay <= monitor_delay:
print "not enough time has passed yet"
continue
long_lasting[wfo.name] = { "delay" : delay,
"injection_delay" : injection_delay }
percent_completions = wfi.getCompletionFraction(caller='completor')
if not percent_completions:
sendLog('completor','%s has no output at all'% wfo.name, level='critical')
continue
is_over_allowed_delay = (all([percent_completions[out] >= good_fraction_per_out.get(out,1000.) for out in percent_completions]) and delay >= allowed_delay)
is_over_truncation_delay = (is_stuck and (all([percent_completions[out] >= truncate_fraction_per_out.get(out,1000.) for out in percent_completions])) and delay >= allowed_delay)
is_over_completion = (all([percent_completions[out] >= good_fraction_nodelay_per_out.get(out,1000.) for out in percent_completions]))
if is_over_completion:
wfi.sendLog('completor', "all is over completed %s\n %s"%( json.dumps( good_fraction_nodelay_per_out, indent=2 ),
json.dumps( percent_completions, indent=2 )
))
elif is_over_allowed_delay:
wfi.sendLog('completor', "all is above %s \n%s"%( json.dumps(good_fraction_per_out, indent=2 ),
json.dumps( percent_completions, indent=2 )
))
elif is_over_truncation_delay:
wfi.sendLog('completor', "all is above %s truncation level, and the input is stuck\n%s"%( json.dumps(truncate_fraction_per_out, indent=2 ),
json.dumps( percent_completions, indent=2 ) ) )
else:
long_lasting[wfo.name].update({
'completion': sum(percent_completions.values()) / len(percent_completions),
'completions' : percent_completions
})
## do something about the agents this workflow is in
long_lasting[wfo.name]['agents'] = wfi.getAgents()
wfi.sendLog('completor', "%s not over bound \ncomplete at %s \n truncate at %s \nRunning %s"%(json.dumps( percent_completions, indent=2),
json.dumps(good_fraction_per_out, indent=2),
json.dumps( truncate_fraction_per_out, indent=2),
json.dumps( long_lasting[wfo.name]['agents'], indent=2) ))
continue
#for output in percent_completions:
# completions[output]['injected'] = then
#further check on delays
cpuh = wfi.getComputingTime(unit='d')
ran_at = wfi.request['SiteWhitelist']
wfi.sendLog('completor',"Required %s, time spend %s"%( cpuh, delay))
##### WILL FORCE COMPLETE BELOW
# only really force complete after n days
## find ACDCs that might be running
if max_force>0:
print "going for force-complete of",wfo.name
if not safe_mode:
forceComplete(url, wfi )
set_force_complete.add( wfo.name )
wfi.sendLog('completor','going for force completing')
wfi.notifyRequestor("The workflow %s was force completed for running too long"% wfo.name)
max_force -=1
else:
sendEmail('completor', 'The workflow %s is ready for force complete, but completor is in safe mode'%wfo.name)
else:
wfi.sendLog('completor',"too many completion this round, cannot force complete")
if set_force_complete:
sendLog('completor','The followings were set force-complete \n%s'%('\n'.join(set_force_complete)))
#open('%s/completions.json'%monitor_dir,'w').write( json.dumps( completions , indent=2))
text="These have been running for long"
#open('%s/longlasting.json'%monitor_dir,'w').write( json.dumps( long_lasting, indent=2 ))
eosFile('%s/longlasting.json'%monitor_dir,'w').write( json.dumps( long_lasting, indent=2 )).close()
for wf,info in sorted(long_lasting.items(), key=lambda tp:tp[1]['delay'], reverse=True):
delay = info['delay']
text += "\n %s : %s days"% (wf, delay)
if 'completion' in info:
text += " %d%%"%( info['completion']*100 )
print text
def completor(url, specific):
use_mcm = True
up = componentInfo(mcm=use_mcm, soft=['mcm'])
if not up.check(): return
use_mcm = up.status['mcm']
if use_mcm:
mcm = McMClient(dev=False)
CI = campaignInfo()
SI = siteInfo()
UC = unifiedConfiguration()
wfs = []
wfs.extend( session.query(Workflow).filter(Workflow.status == 'away').all() )
wfs.extend( session.query(Workflow).filter(Workflow.status.startswith('assistance')).all() )
## just take it in random order so that not always the same is seen
random.shuffle( wfs )
max_per_round = UC.get('max_per_round').get('completor',None)
if max_per_round and not specific: wfs = wfs[:max_per_round]
all_stuck = set()
## take into account what stagor was saying
all_stuck.update( json.loads( open('%s/stuck_transfers.json'%monitor_dir).read() ))
## take into account the block that needed to be repositioned recently
all_stuck.update( [b.split('#')[0] for b in json.loads( open('%s/missing_blocks.json'%monitor_dir).read()) ] )
## take into account all stuck block and dataset from transfer team
all_stuck.update( getAllStuckDataset())
## by workflow a list of fraction / timestamps
completions = json.loads( open('%s/completions.json'%monitor_dir).read())
good_fractions = {}
truncate_fractions = {}
timeout = {}
for c in CI.campaigns:
if 'force-complete' in CI.campaigns[c]:
good_fractions[c] = CI.campaigns[c]['force-complete']
if 'truncate-complete' in CI.campaigns[c]:
truncate_fractions[c] = CI.campaigns[c]['truncate-complete']
if 'force-timeout' in CI.campaigns[c]:
timeout[c] = CI.campaigns[c]['force-timeout']
long_lasting = {}
overrides = getForceCompletes()
if use_mcm:
## add all workflow that mcm wants to get force completed
mcm_force = mcm.get('/restapi/requests/forcecomplete')
## assuming this will be a list of actual prepids
overrides['mcm'] = mcm_force
print "can force complete on"
print json.dumps( good_fractions ,indent=2)
print "can truncate complete on"
print json.dumps( truncate_fractions ,indent=2)
print "can overide on"
print json.dumps( overrides, indent=2)
max_force = UC.get("max_force_complete")
#wfs_no_location_in_GQ = set()
#block_locations = defaultdict(lambda : defaultdict(list))
#wfs_no_location_in_GQ = defaultdict(list)
set_force_complete = set()
for wfo in wfs:
if specific and not specific in wfo.name: continue
print "looking at",wfo.name
## get all of the same
wfi = workflowInfo(url, wfo.name)
pids = wfi.getPrepIDs()
skip=False
if not any([c in wfo.name for c in good_fractions]) and not any([c in wfo.name for c in truncate_fractions]): skip=True
for user,spec in overrides.items():
if wfi.request['RequestStatus']!='force-complete':
if any(s in wfo.name for s in spec) or (wfo.name in spec) or any(pid in spec for pid in pids) or any(s in pids for s in spec):
wfi = workflowInfo(url, wfo.name)
forceComplete(url , wfi )
skip=True
wfi.notifyRequestor("The workflow %s was force completed by request of %s"%(wfo.name,user), do_batch=False)
wfi.sendLog('completor','%s is asking for %s to be force complete'%(user,wfo.name))
break
if wfo.status.startswith('assistance'): skip = True
if skip:
continue
priority = wfi.request['RequestPriority']
if not 'Campaign' in wfi.request: continue
if not wfi.request['RequestStatus'] in ['acquired','running-open','running-closed']: continue
if wfi.request['RequestStatus'] in ['running-open','running-closed'] and (random.random() < 0.01):
try:
parse_one(url, wfo.name )
except Exception as e:
print "failed error parsing"
print str(e)
c = wfi.request['Campaign']
#if not c in good_fractions: continue
good_fraction = good_fractions.get(c,1000.)
truncate_fraction = truncate_fractions.get(c,1000.)
print "force at",good_fraction,"truncate at",truncate_fraction
ignore_fraction = 2.
lumi_expected = None
event_expected = None
if not 'TotalInputEvents' in wfi.request:
if 'RequestNumEvents' in wfi.request:
event_expected = wfi.request['RequestNumEvents']
else:
print "truncated, cannot do anything"
continue
else:
lumi_expected = wfi.request['TotalInputLumis']
event_expected = wfi.request['TotalInputEvents']
now = time.mktime(time.gmtime()) / (60*60*24.)
running_log = filter(lambda change : change["Status"] in ["running-open","running-closed"],wfi.request['RequestTransition'])
if not running_log:
print "\tHas no running log"
# cannot figure out when the thing started running
continue
then = running_log[-1]['UpdateTime'] / (60.*60.*24.)
delay = now - then ## in days
## this is supposed to be the very initial request date, inherited from clones
try:
injected_on =time.mktime(time.strptime("-".join(map(lambda n : "%02d"%n, wfi.request['RequestDate'])), "%Y-%m-%d-%H-%M-%S")) / (60.*60.*24.)
injection_delay = now - injected_on
except:
injection_delay = None
(w,d) = divmod(delay, 7 )
print "\t"*int(w)+"Running since",delay,"[days] priority=",priority
if injection_delay!=None and injection_delay > 50 and False:
tail_cutting_priority = 200000
## bump up to 200k
print "Injected since",injection_delay,"[days] priority=",priority
if wfi.request['RequestPriority'] != tail_cutting_priority:
wfi.sendLog('completor','bumping priority to %d for being injected since'% tail_cutting_priority)
reqMgrClient.changePriorityWorkflow(url, wfo.name, tail_cutting_priority)
_,prim,_,_ = wfi.getIO()
is_stuck = all_stuck & prim
if is_stuck: wfi.sendLog('completor','%s is stuck'%','.join(is_stuck))
monitor_delay = 7
allowed_delay = 14
if c in timeout:
allowed_delay = timeout[c]
monitor_delay = min(monitor_delay, allowed_delay)
### just skip if too early
if delay <= monitor_delay: continue
long_lasting[wfo.name] = { "delay" : delay,
"injection_delay" : injection_delay }
percent_completions = {}
for output in wfi.request['OutputDatasets']:
if "/DQM" in output: continue ## that does not count
if not output in completions: completions[output] = { 'injected' : None, 'checkpoints' : [], 'workflow' : wfo.name}
## get completion fraction
event_count,lumi_count = getDatasetEventsAndLumis(dataset=output)
lumi_completion=0.
event_completion=0.
if lumi_expected:
lumi_completion = lumi_count / float( lumi_expected )
if event_expected:
event_completion = event_count / float( event_expected )
#take the less optimistic
## taking the max or not : to force-complete on over-pro
percent_completions[output] = min( lumi_completion, event_completion )
completions[output]['checkpoints'].append( (now, event_completion ) )
if all([percent_completions[out] >= good_fraction for out in percent_completions]):
wfi.sendLog('completor', "all is above %s \n%s"%( good_fraction,
json.dumps( percent_completions, indent=2 )
))
elif is_stuck and (all([percent_completions[out] >= truncate_fraction for out in percent_completions])):
wfi.sendLog('completor', "all is above %s truncation level, and the input is stuck\n%s"%( truncate_fraction,
json.dumps( percent_completions, indent=2 ) ) )
sendEmail('workflow for truncation','check on %s'%wfo.name)
##continue ## because you do not want to get this one right now
else:
long_lasting[wfo.name].update({
'completion': sum(percent_completions.values()) / len(percent_completions),
'completions' : percent_completions
})
## do something about the agents this workflow is in
long_lasting[wfo.name]['agents'] = wfi.getAgents()
wfi.sendLog('completor', "%s not over bound %.3f (complete) %.3f truncate \n%s"%(percent_completions.values(),
good_fraction, truncate_fraction,
json.dumps( long_lasting[wfo.name]['agents'], indent=2) ))
continue
if all([percent_completions[out] >= ignore_fraction for out in percent_completions]):
print "all is done, just wait a bit"
continue
for output in percent_completions:
completions[output]['injected'] = then
#further check on delays
cpuh = wfi.getComputingTime(unit='d')
ran_at = wfi.request['SiteWhitelist']
wfi.sendLog('completor',"Required %s, time spend %s"%( cpuh, delay))
##### WILL FORCE COMPLETE BELOW
# only really force complete after n days
if delay <= allowed_delay: continue
## find ACDCs that might be running
if max_force>0:
forceComplete(url, wfi )
set_force_complete.add( wfo.name )
print "going for force-complete of",wfo.name
wfi.sendLog('completor','going for force completing')
wfi.notifyRequestor("The workflow %s was force completed for running too long"% wfo.name)
max_force -=1
else:
wfi.sendLog('completor',"too many completion this round, cannot force complete")
## do it once only for testing
#break
if delay >= 40:
print wfo.name,"has been running for",dealy,"days"
## bumping up the priority?
if set_force_complete:
sendLog('completor','The followings were set force-complete \n%s'%('\n'.join(set_force_complete)))
open('%s/completions.json'%monitor_dir,'w').write( json.dumps( completions , indent=2))
text="These have been running for long"
open('%s/longlasting.json'%monitor_dir,'w').write( json.dumps( long_lasting, indent=2 ))
for wf,info in sorted(long_lasting.items(), key=lambda tp:tp[1]['delay'], reverse=True):
delay = info['delay']
text += "\n %s : %s days"% (wf, delay)
if 'completion' in info:
text += " %d%%"%( info['completion']*100 )
print text