def __init__(self):
self._hostname, self._ip = utils.get_hostname_ip()
self._ssl_port = 443
self._non_ssl_port = utils.get_radosgw_port_no()
self._ceph_conf = CephConfOp()
self._rgw_service = RGWService()
# _sections_to_check = ['client.rgw.' + self._hostname,
# 'client.rgw.' + self._ip]
# log.info('checking for existence of sections: {}'.format(_sections_to_check))
# _sections = [section for section in _sections_to_check if self._ceph_conf.check_if_section_exists(section)]
#
# log.info('got section(s): {}'.format(_sections))
# if not any(_sections):
# raise RGWBaseException('No RGW section in ceph.conf')
# self.section = _sections[0]
sections_in_ceph_conf = self._ceph_conf.cfg.sections()
log.info(
'got sections from ceph_conf: {}'.format(sections_in_ceph_conf))
rgw_section = list(
filter(lambda section: 'rgw' in section, sections_in_ceph_conf))
if not rgw_section:
raise RGWBaseException('No RGW section in ceph.conf')
self.section = rgw_section[0]
log.info('using section: {}'.format(self.section))
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
if config.cluster_type == "brownfield":
log.info("Check sharding is enabled or not")
cmd = "radosgw-admin zonegroup get"
out = utils.exec_shell_cmd(cmd)
zonegroup = json.loads(out)
zonegroup = zonegroup.get("enabled_features")
log.info(zonegroup)
if "resharding" in zonegroup:
log.info("sharding is enabled")
else:
log.info("sharding is not enabled")
if config.enable_sharding is True:
log.info(
"Enabling sharding on cluster since cluster is brownfield")
cmd = "radosgw-admin zonegroup get"
out = utils.exec_shell_cmd(cmd)
zonegroup = json.loads(out)
zonegroup_name = zonegroup.get("name")
log.info(zonegroup_name)
cmd = (
"radosgw-admin zonegroup modify --rgw-zonegroup=%s --enable-feature=resharding"
% zonegroup_name)
out = utils.exec_shell_cmd(cmd)
cmd = "radosgw-admin period update --commit"
out = utils.exec_shell_cmd(cmd)
cmd = "radosgw-admin zonegroup get"
out = utils.exec_shell_cmd(cmd)
zonegroup = json.loads(out)
zonegroup = zonegroup.get("enabled_features")
log.info(zonegroup)
if "resharding" in zonegroup:
log.info("sharding is enabled")
else:
raise TestExecError("sharding has not enabled")
else:
raise TestExecError("sharding has not enabled")
if config.cluster_type == "greenfield":
log.info("Check sharding is enabled or not")
cmd = "radosgw-admin zonegroup get"
out = utils.exec_shell_cmd(cmd)
zonegroup = json.loads(out)
zonegroup = zonegroup.get("enabled_features")
log.info(zonegroup)
if "resharding" in zonegroup:
log.info("sharding has enabled already")
else:
raise TestExecError("sharding has not enabled already")
def test_exec(config):
"""
Executes test based on configuration passed
Args:
config(object): Test configuration
"""
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
umgmt = UserMgmt()
ceph_conf = CephConfOp()
rgw_service = RGWService()
# preparing data
user_name = resource_op.create_users(no_of_users_to_create=1)[0]["user_id"]
tenant = "tenant"
tenant_user_info = umgmt.create_tenant_user(tenant_name=tenant,
user_id=user_name,
displayname=user_name)
user_info = umgmt.create_subuser(tenant_name=tenant, user_id=user_name)
hostname = socket.gethostname()
ip = socket.gethostbyname(hostname)
port = utils.get_radosgw_port_no()
ip_and_port = f"{ip}:{port}"
s3_auth.do_auth(tenant_user_info, ip_and_port)
bucket_name = utils.gen_bucket_name_from_userid(user_name, rand_no=0)
# Create a bucket
s3cmd_reusable.create_bucket(bucket_name)
log.info(f"Bucket {bucket_name} created")
# Upload file to bucket
uploaded_file_info = s3cmd_reusable.upload_file(
bucket_name, test_data_path=TEST_DATA_PATH)
uploaded_file = uploaded_file_info["name"]
log.info(f"Uploaded file {uploaded_file} to bucket {bucket_name}")
# Delete file from bucket
s3cmd_reusable.delete_file(bucket_name, uploaded_file)
log.info(f"Deleted file {uploaded_file} from bucket {bucket_name}")
# Delete bucket
s3cmd_reusable.delete_bucket(bucket_name)
log.info(f"Bucket {bucket_name} deleted")
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
config.rgw_lc_debug_interval = 1
config.rgw_lifecycle_work_time = "00:00-23:59"
log.info("making changes to ceph.conf")
ceph_conf.set_to_ceph_conf("global", ConfigOpts.rgw_lc_debug_interval,
str(config.rgw_lc_debug_interval))
log.info("trying to restart services")
srv_restarted = rgw_service.restart()
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
rgw_service.status()
# create user
user_info = s3lib.create_users(config.user_count)
for each_user in user_info:
auth = Auth(each_user, ssl=config.ssl)
rgw_conn = auth.do_auth()
rgw_conn2 = auth.do_auth_using_client()
if config.test_ops["create_bucket"]:
log.info("no of buckets to create: %s" % config.bucket_count)
# create bucket
for bc in range(config.bucket_count):
bucket_name = utils.gen_bucket_name_from_userid(
each_user["user_id"], rand_no=1)
bucket = reusable.create_bucket(bucket_name, rgw_conn,
each_user)
life_cycle_rule = {"Rules": config.lifecycle_conf}
reusable.put_bucket_lifecycle(bucket, rgw_conn, rgw_conn2,
life_cycle_rule)
if config.test_ops["create_object"]:
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
log.info(
f"s3 objects to create of size {config.obj_size}")
s3_object_name = config.lifecycle_conf[0]["Filter"][
"Prefix"] + str(oc)
s3_object_path = os.path.join(TEST_DATA_PATH,
s3_object_name)
log.info(
f"s3 object path: {s3_object_path}, name: {s3_object_name}"
)
reusable.upload_mutipart_object(
s3_object_name, bucket, TEST_DATA_PATH, config,
each_user)
for i in (1, 100):
time.sleep(60)
bucket_details = json.loads(
utils.exec_shell_cmd(
f"radosgw-admin bucket stats --bucket={bucket.name}"
))
if bucket_details["usage"]["rgw.main"]["num_objects"] == 0:
break
else:
raise TestExecError(
"Bucket object expiration taking longer than expected")
gc_list_output = json.loads(
utils.exec_shell_cmd(
"radosgw-admin gc list --include-all"))
if gc_list_output:
log.info("Removing shadow objects found")
utils.exec_shell_cmd(
"radosgw-admin gc process --include-all")
bucket_id = (bucket_details["id"] + "_" +
config.lifecycle_conf[0]["Filter"]["Prefix"])
log.info(
f"check for all the entry {bucket_id} for the bucket in data pool"
)
obj_pool = utils.exec_shell_cmd(
f"rados ls -p default.rgw.buckets.data | grep {bucket_id}")
if obj_pool:
for obj in obj_pool:
object_name = obj.split("_")[-1]
log.info(f"s3 object name to download: {object_name}")
object_name_downloaded = object_name + "." + "download"
object_download_path = os.path.join(
TEST_DATA_PATH, object_name_downloaded)
object_downloaded_status = s3lib.resource_op({
"obj":
bucket,
"resource":
"download_file",
"args": [object_name, object_download_path],
})
if object_downloaded_status is False:
log.info("As expected object is not Downloadable")
if object_downloaded_status is None:
raise TestExecError(
"Objects are not listed but can be downloadable"
)
if config.local_file_delete:
log.info("deleting local file created after the upload")
utils.exec_shell_cmd(f"rm -rf {TEST_DATA_PATH}")
reusable.delete_bucket(bucket)
reusable.remove_user(each_user)
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
config.rgw_lc_debug_interval = 30
config.rgw_lc_max_worker = 10
log.info("making changes to ceph.conf")
ceph_conf.set_to_ceph_conf("global", ConfigOpts.rgw_lc_debug_interval,
str(config.rgw_lc_debug_interval))
_, version_name = utils.get_ceph_version()
if "nautilus" in version_name:
ceph_conf.set_to_ceph_conf("global", ConfigOpts.rgw_lc_max_worker,
str(config.rgw_lc_max_worker))
else:
ceph_conf.set_to_ceph_conf(
section=None,
option=ConfigOpts.rgw_lc_max_worker,
value=str(config.rgw_lc_max_worker),
)
ceph_conf.set_to_ceph_conf(section=None,
option=ConfigOpts.rgw_lc_debug_interval,
value="30")
log.info("trying to restart services")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
config.user_count = 1
config.bucket_count = 1
# create user
user_info = s3lib.create_users(config.user_count)
user_info = user_info[0]
auth = Auth(user_info, ssl=config.ssl)
rgw_conn = auth.do_auth()
rgw_conn2 = auth.do_auth_using_client()
log.info("no of buckets to create: %s" % config.bucket_count)
bucket_name = utils.gen_bucket_name_from_userid(user_info["user_id"],
rand_no=1)
obj_list = []
obj_tag = "suffix1=WMV1"
bucket = reusable.create_bucket(bucket_name, rgw_conn, user_info)
prefix = list(
map(
lambda x: x,
[
rule["Filter"].get("Prefix")
or rule["Filter"]["And"].get("Prefix")
for rule in config.lifecycle_conf
],
))
prefix = prefix if prefix else ["dummy1"]
if config.test_ops["enable_versioning"] is True:
reusable.enable_versioning(bucket, rgw_conn, user_info,
write_bucket_io_info)
if config.test_ops["create_object"] is True:
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
key = prefix.pop()
prefix.insert(0, key)
s3_object_name = key + "." + bucket.name + "." + str(oc)
obj_list.append(s3_object_name)
if config.test_ops["version_count"] > 0:
for vc in range(config.test_ops["version_count"]):
log.info("version count for %s is %s" %
(s3_object_name, str(vc)))
log.info("modifying data: %s" % s3_object_name)
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
user_info,
append_data=True,
append_msg="hello object for version: %s\n" %
str(vc),
)
else:
log.info("s3 objects to create: %s" % config.objects_count)
reusable.upload_object(s3_object_name, bucket,
TEST_DATA_PATH, config, user_info)
life_cycle_rule = {"Rules": config.lifecycle_conf}
reusable.put_get_bucket_lifecycle_test(bucket, rgw_conn, rgw_conn2,
life_cycle_rule, config)
lc_ops.validate_prefix_rule(bucket, config)
if config.test_ops["delete_marker"] is True:
life_cycle_rule_new = {"Rules": config.delete_marker_ops}
reusable.put_get_bucket_lifecycle_test(bucket, rgw_conn, rgw_conn2,
life_cycle_rule_new, config)
if config.test_ops["enable_versioning"] is False:
if config.test_ops["create_object"] is True:
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
key = prefix.pop()
prefix.insert(0, key)
s3_object_name = key + "." + bucket.name + "." + str(oc)
obj_list.append(s3_object_name)
reusable.upload_object_with_tagging(s3_object_name, bucket,
TEST_DATA_PATH, config,
user_info, obj_tag)
life_cycle_rule = {"Rules": config.lifecycle_conf}
reusable.put_get_bucket_lifecycle_test(bucket, rgw_conn, rgw_conn2,
life_cycle_rule, config)
lc_ops.validate_and_rule(bucket, config)
reusable.remove_user(user_info)
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
if __name__ == "__main__":
test_info = AddTestInfo("test bucket notification")
test_info.started_info()
try:
project_dir = os.path.abspath(os.path.join(__file__, "../../.."))
test_data_dir = "test_data"
ceph_conf = CephConfOp()
rgw_service = RGWService()
TEST_DATA_PATH = os.path.join(project_dir, test_data_dir)
log.info("TEST_DATA_PATH: %s" % TEST_DATA_PATH)
if not os.path.exists(TEST_DATA_PATH):
log.info("test data dir not exists, creating.. ")
os.makedirs(TEST_DATA_PATH)
parser = argparse.ArgumentParser(description="RGW S3 Automation")
parser.add_argument("-c",
dest="config",
help="RGW Test yaml configuration")
parser.add_argument(
"-log_level",
dest="log_level",
help="Set Log Level [DEBUG, INFO, WARNING, ERROR, CRITICAL]",
default="info",
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# check the default data log backing
default_data_log = reusable.get_default_datalog_type()
log.info(f"{default_data_log} is the default data log backing")
# check sync status if a multisite cluster
reusable.check_sync_status()
# create user
all_users_info = s3lib.create_users(config.user_count)
for each_user in all_users_info:
# authenticate
auth = Auth(each_user, ssl=config.ssl)
rgw_conn = auth.do_auth()
objects_created_list = []
# change the default datalog backing to FIFO
if config.test_ops.get("change_datalog_backing", False):
logtype = config.test_ops["change_datalog_backing"]
log.info(f"change default datalog backing to {logtype}")
cmd = f"radosgw-admin datalog type --log-type={logtype}"
change_datalog_type = utils.exec_shell_cmd(cmd)
if change_datalog_type is False:
raise TestExecError("Failed to change the datalog type to fifo")
log.info(
"restart the rgw daemons and sleep of 30secs for rgw daemon to be up "
)
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
if config.test_ops["create_bucket"] is True:
log.info("no of buckets to create: %s" % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user["user_id"], rand_no=bc
)
log.info("creating bucket with name: %s" % bucket_name_to_create)
bucket = reusable.create_bucket(
bucket_name_to_create, rgw_conn, each_user
)
if config.test_ops.get("enable_version", False):
log.info("enable bucket version")
reusable.enable_versioning(
bucket, rgw_conn, each_user, write_bucket_io_info
)
if config.test_ops["create_object"] is True:
# uploading data
log.info(
"top level s3 objects to create: %s" % config.objects_count
)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, oc
)
log.info("s3 object name: %s" % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH, s3_object_name)
log.info("s3 object path: %s" % s3_object_path)
if config.test_ops.get("upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
objects_created_list.append((s3_object_name, s3_object_path))
# deleting the local file created after upload
if config.local_file_delete is True:
log.info("deleting local file created after the upload")
utils.exec_shell_cmd("rm -rf %s" % s3_object_path)
# delete object and bucket
if config.test_ops.get("delete_bucket_object", False):
if config.test_ops.get("enable_version", False):
for name, path in objects_created_list:
reusable.delete_version_object(
bucket, name, path, rgw_conn, each_user
)
else:
reusable.delete_objects(bucket)
time.sleep(30)
reusable.delete_bucket(bucket)
# check for any ERRORs in datalog list. ref- https://bugzilla.redhat.com/show_bug.cgi?id=1917687
error_in_data_log_list = reusable.check_datalog_list()
if error_in_data_log_list:
raise TestExecError("Error in datalog list")
# check for data log markers. ref: https://bugzilla.redhat.com/show_bug.cgi?id=1831798#c22
data_log_marker = reusable.check_datalog_marker()
log.info(f"The data_log_marker is: {data_log_marker}")
# check sync status if a multisite cluster
reusable.check_sync_status()
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# create user
all_users_info = s3lib.create_users(config.user_count)
for each_user in all_users_info:
# authentication
auth = Auth(each_user, ssl=config.ssl)
s3_conn_client = auth.do_auth_using_client()
# create buckets with object lock configuration
if config.test_ops["create_bucket"] is True:
log.info(f"no of buckets to create: {config.bucket_count}")
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user["user_id"], rand_no=bc
)
log.info(f"creating bucket with name: {bucket_name_to_create}")
rgw_ip_and_port = get_rgw_ip_and_port()
s3_conn_client.create_bucket(
Bucket=bucket_name_to_create, ObjectLockEnabledForBucket=True
)
# put object lock configuration for bucket
s3_conn_client.put_object_lock_configuration(
Bucket=bucket_name_to_create,
ObjectLockConfiguration={
"ObjectLockEnabled": "Enabled",
"Rule": {"DefaultRetention": {"Mode": "COMPLIANCE", "Days": 1}},
},
)
if config.test_ops["create_object"] is True:
# uploading data
log.info(f"s3 objects to create: {config.objects_count}")
for oc, size in list(config.mapped_sizes.items()):
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, 0
)
log.info(f"s3 object name: {s3_object_name}")
s3_object_path = os.path.join(TEST_DATA_PATH, s3_object_name)
log.info(f"s3 object path: {s3_object_path}")
log.info("upload type: normal")
io_generator(TEST_DATA_PATH + "/" + s3_object_name, size)
s3_conn_client.put_object(
Body=TEST_DATA_PATH + "/" + s3_object_name,
Bucket=bucket_name_to_create,
Key=s3_object_name,
)
log.info("Verify version count")
# Verify version count
versions = s3_conn_client.list_object_versions(
Bucket=bucket_name_to_create
)
versions_count = len(versions["Versions"])
error_message = (
f"Expected: {config.objects_count}, Actual: {versions_count}"
)
if versions_count == config.objects_count:
log.info("Expected and actual version count is same")
else:
raise ObjectVersionCountMismatch(error_message)
# Verify delete disabled for object
log.info("Verify delete disabled for object")
for version_dict in versions["Versions"]:
try:
s3_conn_client.delete_object(
Bucket=bucket_name_to_create,
Key=s3_object_name,
VersionId=version_dict["VersionId"],
)
raise AccessDeniedObjectDeleted(
"Access denied object deleted"
)
except boto3exception.ClientError as e:
expected_code = "AccessDenied"
actual_code = e.response["Error"]["Code"]
assert (
actual_code == expected_code
), "Expected: {expected_code}, Actual: {actual_code}"
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# create user
all_users_info = s3lib.create_users(config.user_count)
if config.test_ops.get("encryption_algorithm", None) is not None:
log.info("encryption enabled, making ceph config changes")
ceph_conf.set_to_ceph_conf("global", ConfigOpts.rgw_crypt_require_ssl,
"false")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
for each_user in all_users_info:
# authenticate
auth = Auth(each_user, ssl=config.ssl)
if config.use_aws4 is True:
rgw_conn = auth.do_auth(**{"signature_version": "s3v4"})
else:
rgw_conn = auth.do_auth()
# enabling sharding
if config.test_ops["sharding"]["enable"] is True:
log.info("enabling sharding on buckets")
max_shards = config.test_ops["sharding"]["max_shards"]
log.info("making changes to ceph.conf")
ceph_conf.set_to_ceph_conf(
"global",
ConfigOpts.rgw_override_bucket_index_max_shards,
str(max_shards),
)
log.info("trying to restart services ")
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
if config.test_ops["compression"]["enable"] is True:
compression_type = config.test_ops["compression"]["type"]
log.info("enabling compression")
cmd = "radosgw-admin zone get"
out = utils.exec_shell_cmd(cmd)
zone = json.loads(out)
zone = zone.get("name")
cmd = ("radosgw-admin zone placement modify --rgw-zone=%s "
"--placement-id=default-placement --compression=%s" %
(zone, compression_type))
out = utils.exec_shell_cmd(cmd)
ceph_version = utils.exec_shell_cmd("ceph version").split()[4]
try:
data = json.loads(out)
if ceph_version == "luminous":
if (data["placement_pools"][0]["val"]["compression"] ==
compression_type):
log.info("Compression enabled successfully")
else:
if ceph_version in ["nautilus", "octopus"]:
if (data["placement_pools"][0]["val"]
["storage_classes"]["STANDARD"]["compression_type"]
== compression_type):
log.info("Compression enabled successfully")
except ValueError as e:
exit(str(e))
log.info("trying to restart rgw services ")
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
if config.gc_verification is True:
conf = config.ceph_conf
reusable.set_gc_conf(ceph_conf, conf)
# create buckets
if config.test_ops["create_bucket"] is True:
log.info("no of buckets to create: %s" % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user["user_id"], rand_no=bc)
log.info("creating bucket with name: %s" %
bucket_name_to_create)
bucket = reusable.create_bucket(bucket_name_to_create,
rgw_conn, each_user)
if config.test_ops["create_object"] is True:
# uploading data
log.info("s3 objects to create: %s" % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, oc)
log.info("s3 object name: %s" % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH,
s3_object_name)
log.info("s3 object path: %s" % s3_object_path)
if config.test_ops.get("upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
if config.test_ops["download_object"] is True:
log.info("trying to download object: %s" %
s3_object_name)
s3_object_download_name = s3_object_name + "." + "download"
s3_object_download_path = os.path.join(
TEST_DATA_PATH, s3_object_download_name)
log.info("s3_object_download_path: %s" %
s3_object_download_path)
log.info("downloading to filename: %s" %
s3_object_download_name)
if (config.test_ops.get("encryption_algorithm",
None) is not None):
log.info("encryption download")
log.info(
"encryption algorithm: %s" %
config.test_ops["encryption_algorithm"])
object_downloaded_status = bucket.download_file(
s3_object_name,
s3_object_download_path,
ExtraArgs={
"SSECustomerKey":
encryption_key,
"SSECustomerAlgorithm":
config.
test_ops["encryption_algorithm"],
},
)
else:
object_downloaded_status = s3lib.resource_op({
"obj":
bucket,
"resource":
"download_file",
"args": [
s3_object_name,
s3_object_download_path,
],
})
if object_downloaded_status is False:
raise TestExecError(
"Resource execution failed: object download failed"
)
if object_downloaded_status is None:
log.info("object downloaded")
s3_object_downloaded_md5 = utils.get_md5(
s3_object_download_path)
s3_object_uploaded_md5 = utils.get_md5(
s3_object_path)
log.info("s3_object_downloaded_md5: %s" %
s3_object_downloaded_md5)
log.info("s3_object_uploaded_md5: %s" %
s3_object_uploaded_md5)
if str(s3_object_uploaded_md5) == str(
s3_object_downloaded_md5):
log.info("md5 match")
utils.exec_shell_cmd("rm -rf %s" %
s3_object_download_path)
else:
raise TestExecError("md5 mismatch")
if config.local_file_delete is True:
log.info(
"deleting local file created after the upload")
utils.exec_shell_cmd("rm -rf %s" % s3_object_path)
# verification of shards after upload
if config.test_ops["sharding"]["enable"] is True:
cmd = (
"radosgw-admin metadata get bucket:%s | grep bucket_id"
% bucket.name)
out = utils.exec_shell_cmd(cmd)
b_id = (out.replace(
'"',
"").strip().split(":")[1].strip().replace(",", ""))
cmd2 = "rados -p default.rgw.buckets.index ls | grep %s" % b_id
out = utils.exec_shell_cmd(cmd2)
log.info(
"got output from sharing verification.--------")
# print out bucket stats and verify in logs for compressed data by
# comparing size_kb_utilized and size_kb_actual
if config.test_ops["compression"]["enable"] is True:
cmd = "radosgw-admin bucket stats --bucket=%s" % bucket.name
out = utils.exec_shell_cmd(cmd)
# print out bucket stats and verify in logs for compressed data by
# comparing size_kb_utilized and size_kb_actual
if config.test_ops["compression"]["enable"] is True:
cmd = "radosgw-admin bucket stats --bucket=%s" % bucket.name
out = utils.exec_shell_cmd(cmd)
if config.test_ops["delete_bucket_object"] is True:
reusable.delete_objects(bucket)
log.info(
"set debug_rgw to 20 before delete the bucket")
config.debug_rgw = 20
ceph_conf.set_to_ceph_conf("global",
ConfigOpts.debug_rgw,
str(config.debug_rgw))
log.info("trying to restart services")
srv_restarted = rgw_service.restart()
time.sleep(20)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
reusable.delete_bucket(bucket)
# disable compression after test
if config.test_ops["compression"]["enable"] is True:
log.info("disable compression")
cmd = "radosgw-admin zone get"
out = utils.exec_shell_cmd(cmd)
zone = json.loads(out)
zone = zone.get("name")
cmd = ("radosgw-admin zone placement modify --rgw-zone=%s "
"--placement-id=default-placement --compression=none" %
zone)
out = utils.exec_shell_cmd(cmd)
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
if config.gc_verification is True:
final_op = reusable.verify_gc()
if final_op != -1:
test_info.failed_status("test failed")
sys.exit(1)
# check sync status if a multisite cluster
reusable.check_sync_status()
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# create user
user_info = s3lib.create_users(config.user_count)
user_info = user_info[0]
auth = Auth(user_info, ssl=config.ssl)
rgw_conn = auth.do_auth()
rgw_conn2 = auth.do_auth_using_client()
log.info('no of buckets to create: %s' % config.bucket_count)
# create buckets
if config.test_ops['create_bucket'] is True:
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(user_info['user_id'], rand_no=bc)
log.info('creating bucket with name: %s' % bucket_name_to_create)
bucket = reusable.create_bucket(bucket_name_to_create, rgw_conn, user_info)
if config.test_ops['create_object'] is True:
# uploading data
log.info('s3 objects to create: %s' % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(bucket_name_to_create, oc)
log.info('s3 object name: %s' % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH, s3_object_name)
log.info('s3 object path: %s' % s3_object_path)
if config.test_ops.get('upload_type') == 'multipart':
log.info('upload type: multipart')
reusable.upload_mutipart_object(s3_object_name, bucket, TEST_DATA_PATH, config,
user_info)
else:
log.info('upload type: normal')
reusable.upload_object(s3_object_name, bucket, TEST_DATA_PATH, config, user_info)
if config.gc_verification is True:
log.info('making changes to ceph.conf')
config.rgw_gc_obj_min_wait = 5
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_gc_obj_min_wait,
str(config.rgw_gc_obj_min_wait))
log.info('trying to restart services')
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
log.info('download the large object again to populate gc list with shadow entries')
reusable.download_object(s3_object_name, bucket, TEST_DATA_PATH, s3_object_path, config)
time.sleep(60)
gc_list_output = json.loads(utils.exec_shell_cmd("radosgw-admin gc list --include-all"))
log.info(gc_list_output)
if gc_list_output:
log.info("Shadow objects found after setting the rgw_gc_obj_min_wait to 5 seconds")
utils.exec_shell_cmd("radosgw-admin gc process")
log.info('Object download should not error out in 404 NoSuchKey error')
reusable.download_object(s3_object_name, bucket, TEST_DATA_PATH, s3_object_path, config)
reusable.remove_user(user_info)
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_config_set = CephConfOp()
rgw_service = RGWService()
if config.sts is None:
raise TestExecError("sts policies are missing in yaml config")
# create users
config.user_count = 2
users_info = s3lib.create_users(config.user_count)
user1, user2 = users_info[0], users_info[1]
log.info("adding sts config to ceph.conf")
sesison_encryption_token = "abcdefghijklmnoq"
ceph_config_set.set_to_ceph_conf(
"global", ConfigOpts.rgw_sts_key, sesison_encryption_token
)
ceph_config_set.set_to_ceph_conf("global", ConfigOpts.rgw_s3_auth_use_sts, "True")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
# Adding caps for user1
add_caps_cmd = (
'sudo radosgw-admin caps add --uid="{user_id}" --caps="roles=*"'.format(
user_id=user1["user_id"]
)
)
utils.exec_shell_cmd(add_caps_cmd)
# user1 auth with iam_client
auth = Auth(user1, ssl=config.ssl)
iam_client = auth.do_auth_iam_client()
# policy document
policy_document = json.dumps(config.sts["policy_document"]).replace(" ", "")
policy_document = policy_document.replace("<user_name>", user2["user_id"])
print(policy_document)
# role policy
role_policy = json.dumps(config.sts["role_policy"]).replace(" ", "")
print(role_policy)
role_name = f"S3RoleOf.{user1['user_id']}"
log.info(f"role_name: {role_name}")
# role creation happens here
log.info("creating role")
create_role_response = iam_client.create_role(
AssumeRolePolicyDocument=policy_document,
Path="/",
RoleName=role_name,
)
log.info("create_role_response")
log.info(create_role_response)
# Put role policy happening here
policy_name = f"policy.{user1['user_id']}"
log.info(f"policy_name: {policy_name}")
log.info("putting role policy")
put_policy_response = iam_client.put_role_policy(
RoleName=role_name, PolicyName=policy_name, PolicyDocument=role_policy
)
log.info("put_policy_response")
log.info(put_policy_response)
# bucket creation operations now
bucket_name = "testbucket" + user1["user_id"]
# authenticating user1 for bucket creation operation
auth = Auth(user1, ssl=config.ssl)
user1_info = {
"access_key": user1["access_key"],
"secret_key": user1["secret_key"],
"user_id": user1["user_id"],
}
s3_client_u1 = auth.do_auth()
# bucket creation operation
bucket = reusable.create_bucket(bucket_name, s3_client_u1, user1_info)
# uploading objects to the bucket
if config.test_ops["create_object"]:
# uploading data
log.info("s3 objects to create: %s" % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(bucket_name, oc)
log.info("s3 object name: %s" % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH, s3_object_name)
log.info("s3 object path: %s" % s3_object_path)
if config.test_ops.get("upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
user1_info,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
user1_info,
)
auth = Auth(user2, ssl=config.ssl)
sts_client = auth.do_auth_sts_client()
log.info("assuming role")
assume_role_response = sts_client.assume_role(
RoleArn=create_role_response["Role"]["Arn"],
RoleSessionName=user1["user_id"],
DurationSeconds=3600,
)
log.info(assume_role_response)
assumed_role_user_info = {
"access_key": assume_role_response["Credentials"]["AccessKeyId"],
"secret_key": assume_role_response["Credentials"]["SecretAccessKey"],
"session_token": assume_role_response["Credentials"]["SessionToken"],
"user_id": user2["user_id"],
}
log.info("got the credentials after assume role")
s3client = Auth(assumed_role_user_info, ssl=config.ssl)
s3_client = s3client.do_auth_using_client()
io_info_initialize.initialize(basic_io_structure.initial())
write_user_info = AddUserInfo()
basic_io_structure = BasicIOInfoStructure()
user_info = basic_io_structure.user(
**{
"user_id": assumed_role_user_info["user_id"],
"access_key": assumed_role_user_info["access_key"],
"secret_key": assumed_role_user_info["secret_key"],
}
)
write_user_info.add_user_info(user_info)
unexisting_object = bucket_name + "_unexisting_object"
try:
response = s3_client.head_object(Bucket=bucket_name, Key=unexisting_object)
except botocore.exceptions.ClientError as e:
response_code = e.response["Error"]["Code"]
log.info(response_code)
if e.response["Error"]["Code"] == "404":
log.info("404 Unexisting Object Not Found")
elif e.response["Error"]["Code"] == "403":
raise TestExecError("Error code : 403 - HeadObject operation: Forbidden")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_config_set = CephConfOp()
rgw_service = RGWService()
# create users
config.user_count = 2
users_info = s3lib.create_users(config.user_count)
# user1 is the owner
user1, user2 = users_info[0], users_info[1]
log.info("adding sts config to ceph.conf")
sesison_encryption_token = "abcdefghijklmnoq"
ceph_config_set.set_to_ceph_conf("global", ConfigOpts.rgw_sts_key,
sesison_encryption_token)
ceph_config_set.set_to_ceph_conf("global", ConfigOpts.rgw_s3_auth_use_sts,
True)
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
auth = Auth(user1)
iam_client = auth.do_auth_iam_client()
"""
TODO:
policy_document and role_policy can be used valid dict types.
need to explore on this.
"""
policy_document = (
'{"Version":"2012-10-17",'
'"Statement":[{"Effect":"Allow","Principal":{"AWS":["arn:aws:iam:::user/%s"]},'
'"Action":["sts:AssumeRole"]}]}' % (user2["user_id"]))
role_policy = ('{"Version":"2012-10-17",'
'"Statement":{"Effect":"Allow",'
'"Action":"s3:*",'
'"Resource":"arn:aws:s3:::*"}}')
add_caps_cmd = (
'sudo radosgw-admin caps add --uid="{user_id}" --caps="roles=*"'.
format(user_id=user1["user_id"]))
utils.exec_shell_cmd(add_caps_cmd)
# log.info(policy_document)
role_name = f"S3RoleOf.{user1['user_id']}"
log.info(f"role_name: {role_name}")
log.info("creating role")
create_role_response = iam_client.create_role(
AssumeRolePolicyDocument=policy_document,
Path="/",
RoleName=role_name,
)
log.info("create_role_response")
log.info(create_role_response)
policy_name = f"policy.{user1['user_id']}"
log.info(f"policy_name: {policy_name}")
log.info("putting role policy")
put_policy_response = iam_client.put_role_policy(
RoleName=role_name, PolicyName=policy_name, PolicyDocument=role_policy)
log.info("put_policy_response")
log.info(put_policy_response)
auth = Auth(user2)
sts_client = auth.do_auth_sts_client()
log.info("assuming role")
assume_role_response = sts_client.assume_role(
RoleArn=create_role_response["Role"]["Arn"],
RoleSessionName=user1["user_id"],
DurationSeconds=3600,
)
log.info(assume_role_response)
assumed_role_user_info = {
"access_key": assume_role_response["Credentials"]["AccessKeyId"],
"secret_key": assume_role_response["Credentials"]["SecretAccessKey"],
"session_token": assume_role_response["Credentials"]["SessionToken"],
"user_id": user2["user_id"],
}
log.info("got the credentials after assume role")
s3client = Auth(assumed_role_user_info)
s3_client_rgw = s3client.do_auth()
io_info_initialize.initialize(basic_io_structure.initial())
write_user_info = AddUserInfo()
basic_io_structure = BasicIOInfoStructure()
user_info = basic_io_structure.user(
**{
"user_id": assumed_role_user_info["user_id"],
"access_key": assumed_role_user_info["access_key"],
"secret_key": assumed_role_user_info["secret_key"],
})
write_user_info.add_user_info(user_info)
if config.test_ops["create_bucket"] is True:
log.info("no of buckets to create: %s" % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
assumed_role_user_info["user_id"], rand_no=bc)
log.info("creating bucket with name: %s" % bucket_name_to_create)
bucket = reusable.create_bucket(bucket_name_to_create,
s3_client_rgw,
assumed_role_user_info)
if config.test_ops["create_object"] is True:
# uploading data
log.info("s3 objects to create: %s" % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, oc)
log.info("s3 object name: %s" % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH,
s3_object_name)
log.info("s3 object path: %s" % s3_object_path)
if config.test_ops.get("upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
assumed_role_user_info,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
assumed_role_user_info,
)
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
objects_created_list = []
# create user
all_users_info = s3lib.create_users(config.user_count)
if config.test_ops.get('encryption_algorithm', None) is not None:
log.info('encryption enabled, making ceph config changes')
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_crypt_require_ssl, "false")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
# making changes to max_objects_per_shard and rgw_gc_obj_min_wait to ceph.conf
log.info('making changes to ceph.conf')
log.info(f'rgw_max_objs_per_shard parameter set to {str(config.max_objects_per_shard)}')
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_max_objs_per_shard, str(config.max_objects_per_shard))
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_dynamic_resharding,
'True')
log.info(f'rgw gc obj min wait configuration parameter set to {str(config.rgw_gc_obj_min_wait)}')
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_gc_obj_min_wait,str(config.rgw_gc_obj_min_wait))
sleep_time = 10
log.info(f'Restarting RGW service and waiting for {sleep_time} seconds')
srv_restarted = rgw_service.restart()
time.sleep(sleep_time)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
for each_user in all_users_info:
# authenticate
auth = Auth(each_user, ssl=config.ssl)
if config.use_aws4 is True:
rgw_conn = auth.do_auth(**{'signature_version': 's3v4'})
else:
rgw_conn = auth.do_auth()
objects_created_list = []
if config.test_ops['create_bucket'] is True:
log.info('no of buckets to create: %s' % config.bucket_count)
for bc in range(config.bucket_count):
log.info(f'creating {str(bc)} bucket')
bucket_name_to_create = utils.gen_bucket_name_from_userid(each_user['user_id'], rand_no=bc)
log.info('creating bucket with name: %s' % bucket_name_to_create)
bucket = reusable.create_bucket(bucket_name_to_create, rgw_conn, each_user)
if config.test_ops.get('enable_version', False):
log.info('enable bucket version')
reusable.enable_versioning(bucket, rgw_conn, each_user, write_bucket_io_info)
if config.test_ops['create_object'] is True:
log.info('s3 objects to create: %s' % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(bucket.name, oc)
log.info('s3 object name: %s' % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH, s3_object_name)
log.info('s3 object path: %s' % s3_object_path)
if config.test_ops.get('enable_version', False):
log.info('upload versioned objects')
reusable.upload_version_object(config, each_user, rgw_conn, s3_object_name, config.obj_size, bucket,
TEST_DATA_PATH)
else:
log.info('upload type: normal')
reusable.upload_object(s3_object_name, bucket, TEST_DATA_PATH, config, each_user)
objects_created_list.append((s3_object_name, s3_object_path))
#deleting the local file created after upload
if config.local_file_delete is True:
log.info('deleting local file created after the upload')
utils.exec_shell_cmd('rm -rf %s' % s3_object_path)
# listing the objects
if config.test_ops.get('list_objects', False):
if config.test_ops.get('enable_version', False):
for name,path in objects_created_list:
reusable.list_versioned_objects(bucket,name,path,rgw_conn)
else:
reusable.list_objects(bucket)
if config.test_ops.get('delete_bucket_object', False):
if config.test_ops.get('enable_version', False):
for name, path in objects_created_list:
print("name, path",name,path)
versions = bucket.object_versions.filter(Prefix=name)
log.info('deleting s3_obj keys and its versions')
s3_obj = s3lib.resource_op({'obj': rgw_conn,
'resource': 'Object',
'args': [bucket.name, name]})
log.info('deleting versions for s3 obj: %s' % name)
for version in versions:
log.info('trying to delete obj version: %s' % version.version_id)
del_obj_version = s3lib.resource_op({'obj': s3_obj,
'resource': 'delete',
'kwargs': dict(VersionId=version.version_id)})
log.info('response:\n%s' % del_obj_version)
if del_obj_version is not None:
response = HttpResponseParser(del_obj_version)
if response.status_code == 204:
log.info('version deleted ')
reusable.delete_version_object(bucket,version.version_id, path, rgw_conn, each_user)
else:
raise TestExecError("version deletion failed")
else:
raise TestExecError("version deletion failed")
else:
reusable.delete_objects(bucket)
log.info(f'deleting the bucket {bucket_name_to_create}')
reusable.delete_bucket(bucket)
# check for any crashes during the execution
crash_info=reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
#remove the user
reusable.remove_user(each_user)
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
write_user_info = AddUserInfo()
test_info = AddTestInfo("create m buckets")
conf_path = "/etc/ceph/%s.conf" % config.cluster_name
ceph_conf = CephConfOp(conf_path)
rgw_service = RGWService()
try:
test_info.started_info()
# get user
with open("user_details") as fout:
all_users_info = simplejson.load(fout)
for each_user in all_users_info:
user_info = basic_io_structure.user(
**{
"user_id": each_user["user_id"],
"access_key": each_user["access_key"],
"secret_key": each_user["secret_key"],
})
write_user_info.add_user_info(user_info)
for each_user in all_users_info:
# authenticate
auth = Auth(each_user)
rgw_conn = auth.do_auth()
# enabling sharding
if config.test_ops["sharding"]["enable"] is True:
log.info("enabling sharding on buckets")
max_shards = config.test_ops["sharding"]["max_shards"]
log.info("making changes to ceph.conf")
ceph_conf.set_to_ceph_conf(
"global",
ConfigOpts.rgw_override_bucket_index_max_shards,
max_shards,
)
log.info("trying to restart services ")
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
# create buckets
if config.test_ops["create_bucket"] is True:
log.info("no of buckets to create: %s" % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user["user_id"], rand_no=bc)
log.info("creating bucket with name: %s" %
bucket_name_to_create)
# bucket = s3_ops.resource_op(rgw_conn, 'Bucket', bucket_name_to_create)
bucket = s3lib.resource_op({
"obj": rgw_conn,
"resource": "Bucket",
"args": [bucket_name_to_create],
})
created = s3lib.resource_op({
"obj": bucket,
"resource": "create",
"args": None,
"extra_info": {
"access_key": each_user["access_key"]
},
})
if created is False:
raise TestExecError(
"Resource execution failed: bucket creation failed"
)
if created is not None:
response = HttpResponseParser(created)
if response.status_code == 200:
log.info("bucket created")
else:
raise TestExecError("bucket creation failed")
else:
raise TestExecError("bucket creation failed")
if config.test_ops["sharding"]["enable"] is True:
cmd = (
"radosgw-admin metadata get bucket:%s --cluster %s | grep bucket_id"
% (bucket.name, config.cluster_name))
out = utils.exec_shell_cmd(cmd)
b_id = (out.replace(
'"',
"").strip().split(":")[1].strip().replace(",", ""))
cmd2 = (
"rados -p default.rgw.buckets.index ls --cluster %s | grep %s"
% (config.cluster_name, b_id))
out = utils.exec_shell_cmd(cmd2)
log.info(
"got output from sharing verification.--------")
test_info.success_status("test passed")
sys.exit(0)
except Exception as e:
log.info(e)
log.info(traceback.format_exc())
test_info.failed_status("test failed")
sys.exit(1)
except TestExecError as e:
log.info(e)
log.info(traceback.format_exc())
test_info.failed_status("test failed")
sys.exit(1)
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
config.rgw_lc_debug_interval = 30
config.rgw_lc_max_worker = 10
log.info('making changes to ceph.conf')
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_lc_debug_interval, str(config.rgw_lc_debug_interval))
ceph_version = utils.exec_shell_cmd("ceph version")
op = ceph_version.split()
for i in op:
if i == 'nautilus':
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_lc_max_worker, str(config.rgw_lc_max_worker))
log.info('trying to restart services')
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
config.user_count = 1
config.bucket_count = 1
# create user
user_info = s3lib.create_users(config.user_count)
user_info = user_info[0]
auth = Auth(user_info, ssl=config.ssl)
rgw_conn = auth.do_auth()
rgw_conn2 = auth.do_auth_using_client()
log.info('no of buckets to create: %s' % config.bucket_count)
bucket_name = utils.gen_bucket_name_from_userid(user_info['user_id'], rand_no=1)
obj_list = []
obj_tag = 'suffix1=WMV1'
bucket = reusable.create_bucket(bucket_name, rgw_conn, user_info)
prefix = list(map(lambda x: x,
[rule['Filter'].get('Prefix') or
rule['Filter']['And'].get('Prefix')
for rule in config.lifecycle_conf]))
prefix = prefix if prefix else ['dummy1']
if config.test_ops['enable_versioning'] is True:
reusable.enable_versioning(bucket, rgw_conn, user_info, write_bucket_io_info)
if config.test_ops['create_object'] is True:
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
key = prefix.pop()
prefix.insert(0, key)
s3_object_name = key + '.' + bucket.name + '.' + str(oc)
obj_list.append(s3_object_name)
if config.test_ops['version_count'] > 0:
for vc in range(config.test_ops['version_count']):
log.info('version count for %s is %s' % (s3_object_name, str(vc)))
log.info('modifying data: %s' % s3_object_name)
reusable.upload_object(s3_object_name, bucket, TEST_DATA_PATH, config, user_info,
append_data=True,
append_msg='hello object for version: %s\n' % str(vc))
else:
log.info('s3 objects to create: %s' % config.objects_count)
reusable.upload_object(s3_object_name, bucket, TEST_DATA_PATH, config, user_info)
life_cycle_rule = {"Rules": config.lifecycle_conf}
reusable.put_get_bucket_lifecycle_test(bucket, rgw_conn, rgw_conn2, life_cycle_rule, config)
lc_ops.validate_prefix_rule(bucket, config)
if config.test_ops['delete_marker'] is True:
life_cycle_rule_new = {"Rules": config.delete_marker_ops}
reusable.put_get_bucket_lifecycle_test(bucket, rgw_conn, rgw_conn2, life_cycle_rule_new, config)
if config.test_ops['enable_versioning'] is False:
if config.test_ops['create_object'] is True:
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
key = prefix.pop()
prefix.insert(0, key)
s3_object_name = key + '.' + bucket.name + '.' + str(oc)
obj_list.append(s3_object_name)
reusable.upload_object_with_tagging(s3_object_name, bucket, TEST_DATA_PATH, config, user_info, obj_tag)
life_cycle_rule = {"Rules": config.lifecycle_conf}
reusable.put_get_bucket_lifecycle_test(bucket, rgw_conn, rgw_conn2, life_cycle_rule, config)
lc_ops.validate_and_rule(bucket, config)
reusable.remove_user(user_info)
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# create user
all_users_info = s3lib.create_users(config.user_count)
if config.test_ops.get('encryption_algorithm', None) is not None:
log.info('encryption enabled, making ceph config changes')
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_crypt_require_ssl,
"false")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
for each_user in all_users_info:
# authenticate
auth = Auth(each_user, ssl=config.ssl)
if config.use_aws4 is True:
rgw_conn = auth.do_auth(**{'signature_version': 's3v4'})
else:
rgw_conn = auth.do_auth()
# enabling sharding
if config.test_ops['sharding']['enable'] is True:
log.info('enabling sharding on buckets')
max_shards = config.test_ops['sharding']['max_shards']
log.info('making changes to ceph.conf')
ceph_conf.set_to_ceph_conf(
'global', ConfigOpts.rgw_override_bucket_index_max_shards,
str(max_shards))
log.info('trying to restart services ')
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
if config.test_ops['compression']['enable'] is True:
compression_type = config.test_ops['compression']['type']
log.info('enabling compression')
cmd = 'radosgw-admin zone get'
out = utils.exec_shell_cmd(cmd)
zone = json.loads(out)
zone = zone.get("name")
cmd = 'radosgw-admin zone placement modify --rgw-zone=%s ' \
'--placement-id=default-placement --compression=%s' % (zone,compression_type)
out = utils.exec_shell_cmd(cmd)
try:
data = json.loads(out)
if data['placement_pools'][0]['val']['storage_classes'][
'STANDARD']['compression_type'] == compression_type:
log.info('Compression enabled successfully')
else:
raise ValueError('failed to enable compression')
except ValueError as e:
exit(str(e))
log.info('trying to restart rgw services ')
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
# create buckets
if config.test_ops['create_bucket'] is True:
log.info('no of buckets to create: %s' % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user['user_id'], rand_no=bc)
log.info('creating bucket with name: %s' %
bucket_name_to_create)
bucket = resuables.create_bucket(bucket_name_to_create,
rgw_conn, each_user)
if config.test_ops['create_object'] is True:
# uploading data
log.info('s3 objects to create: %s' % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, oc)
log.info('s3 object name: %s' % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH,
s3_object_name)
log.info('s3 object path: %s' % s3_object_path)
if config.test_ops.get('upload_type') == 'multipart':
log.info('upload type: multipart')
resuables.upload_mutipart_object(
s3_object_name, bucket, TEST_DATA_PATH, config,
each_user)
else:
log.info('upload type: normal')
resuables.upload_object(s3_object_name, bucket,
TEST_DATA_PATH, config,
each_user)
if config.test_ops['download_object'] is True:
log.info('trying to download object: %s' %
s3_object_name)
s3_object_download_name = s3_object_name + "." + "download"
s3_object_download_path = os.path.join(
TEST_DATA_PATH, s3_object_download_name)
log.info('s3_object_download_path: %s' %
s3_object_download_path)
log.info('downloading to filename: %s' %
s3_object_download_name)
if config.test_ops.get('encryption_algorithm',
None) is not None:
log.info('encryption download')
log.info(
'encryption algorithm: %s' %
config.test_ops['encryption_algorithm'])
object_downloaded_status = bucket.download_file(
s3_object_name,
s3_object_download_path,
ExtraArgs={
'SSECustomerKey':
encryption_key,
'SSECustomerAlgorithm':
config.test_ops['encryption_algorithm']
})
else:
object_downloaded_status = s3lib.resource_op({
'obj':
bucket,
'resource':
'download_file',
'args':
[s3_object_name, s3_object_download_path],
})
if object_downloaded_status is False:
raise TestExecError(
"Resource execution failed: object download failed"
)
if object_downloaded_status is None:
log.info('object downloaded')
s3_object_downloaded_md5 = utils.get_md5(
s3_object_download_path)
s3_object_uploaded_md5 = utils.get_md5(
s3_object_path)
log.info('s3_object_downloaded_md5: %s' %
s3_object_downloaded_md5)
log.info('s3_object_uploaded_md5: %s' %
s3_object_uploaded_md5)
if str(s3_object_uploaded_md5) == str(
s3_object_downloaded_md5):
log.info('md5 match')
utils.exec_shell_cmd('rm -rf %s' %
s3_object_download_path)
else:
raise TestExecError('md5 mismatch')
if config.local_file_delete is True:
log.info(
'deleting local file created after the upload')
utils.exec_shell_cmd('rm -rf %s' % s3_object_path)
# verification of shards after upload
if config.test_ops['sharding']['enable'] is True:
cmd = 'radosgw-admin metadata get bucket:%s | grep bucket_id' % bucket.name
out = utils.exec_shell_cmd(cmd)
b_id = out.replace(
'"',
'').strip().split(":")[1].strip().replace(',', '')
cmd2 = 'rados -p default.rgw.buckets.index ls | grep %s' % b_id
out = utils.exec_shell_cmd(cmd2)
log.info(
'got output from sharing verification.--------')
# print out bucket stats and verify in logs for compressed data by
# comparing size_kb_utilized and size_kb_actual
if config.test_ops['compression']['enable'] is True:
cmd = 'radosgw-admin bucket stats --bucket=%s' % bucket.name
out = utils.exec_shell_cmd(cmd)
# print out bucket stats and verify in logs for compressed data by
# comparing size_kb_utilized and size_kb_actual
if config.test_ops['compression']['enable'] is True:
cmd = 'radosgw-admin bucket stats --bucket=%s' % bucket.name
out = utils.exec_shell_cmd(cmd)
if config.test_ops['delete_bucket_object'] is True:
log.info('listing all objects in bucket: %s' %
bucket.name)
objects = s3lib.resource_op({
'obj': bucket,
'resource': 'objects',
'args': None
})
log.info('objects :%s' % objects)
all_objects = s3lib.resource_op({
'obj': objects,
'resource': 'all',
'args': None
})
log.info('all objects: %s' % all_objects)
for obj in all_objects:
log.info('object_name: %s' % obj.key)
log.info('deleting all objects in bucket')
objects_deleted = s3lib.resource_op({
'obj': objects,
'resource': 'delete',
'args': None
})
log.info('objects_deleted: %s' % objects_deleted)
if objects_deleted is False:
raise TestExecError(
'Resource execution failed: Object deletion failed'
)
if objects_deleted is not None:
response = HttpResponseParser(objects_deleted[0])
if response.status_code == 200:
log.info('objects deleted ')
else:
raise TestExecError("objects deletion failed")
else:
raise TestExecError("objects deletion failed")
log.info('deleting bucket: %s' % bucket.name)
# bucket_deleted_status = s3_ops.resource_op(bucket, 'delete')
bucket_deleted_status = s3lib.resource_op({
'obj': bucket,
'resource': 'delete',
'args': None
})
log.info('bucket_deleted_status: %s' %
bucket_deleted_status)
if bucket_deleted_status is not None:
response = HttpResponseParser(
bucket_deleted_status)
if response.status_code == 204:
log.info('bucket deleted ')
else:
raise TestExecError("bucket deletion failed")
else:
raise TestExecError("bucket deletion failed")
# disable compression after test
if config.test_ops['compression']['enable'] is True:
log.info('disable compression')
cmd = 'radosgw-admin zone get'
out = utils.exec_shell_cmd(cmd)
zone = json.loads(out)
zone = zone.get("name")
cmd = 'radosgw-admin zone placement modify --rgw-zone=%s ' \
'--placement-id=default-placement --compression=none' % zone
out = utils.exec_shell_cmd(cmd)
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# create user
if config.dbr_scenario == "brownfield":
user_brownfiled = "brownfield_user"
all_users_info = s3lib.create_users(config.user_count, user_brownfiled)
else:
all_users_info = s3lib.create_users(config.user_count)
if config.test_ops.get("encryption_algorithm", None) is not None:
log.info("encryption enabled, making ceph config changes")
ceph_conf.set_to_ceph_conf("global", ConfigOpts.rgw_crypt_require_ssl, "false")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
for each_user in all_users_info:
# authenticate
auth = Auth(each_user, ssl=config.ssl)
if config.use_aws4 is True:
rgw_conn = auth.do_auth(**{"signature_version": "s3v4"})
else:
rgw_conn = auth.do_auth()
# enabling sharding
if config.test_ops["sharding"]["enable"] is True:
log.info("enabling sharding on buckets")
max_shards = config.test_ops["sharding"]["max_shards"]
log.info("making changes to ceph.conf")
ceph_conf.set_to_ceph_conf(
"global",
ConfigOpts.rgw_override_bucket_index_max_shards,
str(max_shards),
)
log.info("trying to restart services ")
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
if config.test_ops["compression"]["enable"] is True:
compression_type = config.test_ops["compression"]["type"]
log.info("enabling compression")
cmd = "radosgw-admin zone get"
out = utils.exec_shell_cmd(cmd)
zone = json.loads(out)
zone = zone.get("name")
cmd = (
"radosgw-admin zone placement modify --rgw-zone=%s "
"--placement-id=default-placement --compression=%s"
% (zone, compression_type)
)
out = utils.exec_shell_cmd(cmd)
ceph_version = utils.exec_shell_cmd("ceph version").split()[4]
try:
data = json.loads(out)
if ceph_version == "luminous":
if (
data["placement_pools"][0]["val"]["compression"]
== compression_type
):
log.info("Compression enabled successfully")
else:
if ceph_version in ["nautilus", "octopus"]:
if (
data["placement_pools"][0]["val"]["storage_classes"][
"STANDARD"
]["compression_type"]
== compression_type
):
log.info("Compression enabled successfully")
except ValueError as e:
exit(str(e))
log.info("trying to restart rgw services ")
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
if config.gc_verification is True:
conf = config.ceph_conf
reusable.set_gc_conf(ceph_conf, conf)
if config.dynamic_resharding is True:
if utils.check_dbr_support():
log.info("making changes to ceph.conf")
ceph_conf.set_to_ceph_conf(
"global",
ConfigOpts.rgw_max_objs_per_shard,
str(config.max_objects_per_shard),
)
srv_restarted = rgw_service.restart()
# create buckets
if config.test_ops["create_bucket"] is True:
log.info("no of buckets to create: %s" % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user["user_id"], rand_no=bc
)
if config.bucket_sync_crash is True:
is_primary = utils.is_cluster_primary()
if is_primary:
bucket_name_to_create = "bkt_crash_check"
if config.dbr_scenario == "brownfield":
bucket_name_to_create = "brownfield_bucket"
log.info("creating bucket with name: %s" % bucket_name_to_create)
bucket = reusable.create_bucket(
bucket_name_to_create, rgw_conn, each_user
)
if config.dynamic_resharding is True:
reusable.check_sync_status()
op = utils.exec_shell_cmd(
f"radosgw-admin bucket stats --bucket {bucket.name}"
)
json_doc = json.loads(op)
old_num_shards = json_doc["num_shards"]
log.info(f"no_of_shards_created: {old_num_shards}")
if config.test_ops["create_object"] is True:
# uploading data
log.info("s3 objects to create: %s" % config.objects_count)
if utils.check_dbr_support():
if bucket_name_to_create == "brownfield_bucket":
op = utils.exec_shell_cmd(
f"radosgw-admin bucket stats --bucket {bucket.name}"
)
json_doc = json.loads(op)
if bool(json_doc["usage"]):
num_object = json_doc["usage"]["rgw.main"][
"num_objects"
]
config.objects_count = (
num_object * 2 + config.objects_count
)
config.mapped_sizes = utils.make_mapped_sizes(config)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, oc
)
log.info("s3 object name: %s" % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH, s3_object_name)
log.info("s3 object path: %s" % s3_object_path)
if config.test_ops.get("upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
if config.test_ops["download_object"] is True:
log.info("trying to download object: %s" % s3_object_name)
s3_object_download_name = s3_object_name + "." + "download"
s3_object_download_path = os.path.join(
TEST_DATA_PATH, s3_object_download_name
)
log.info(
"s3_object_download_path: %s" % s3_object_download_path
)
log.info(
"downloading to filename: %s" % s3_object_download_name
)
if (
config.test_ops.get("encryption_algorithm", None)
is not None
):
log.info("encryption download")
log.info(
"encryption algorithm: %s"
% config.test_ops["encryption_algorithm"]
)
object_downloaded_status = bucket.download_file(
s3_object_name,
s3_object_download_path,
ExtraArgs={
"SSECustomerKey": encryption_key,
"SSECustomerAlgorithm": config.test_ops[
"encryption_algorithm"
],
},
)
else:
object_downloaded_status = s3lib.resource_op(
{
"obj": bucket,
"resource": "download_file",
"args": [
s3_object_name,
s3_object_download_path,
],
}
)
if object_downloaded_status is False:
raise TestExecError(
"Resource execution failed: object download failed"
)
if object_downloaded_status is None:
log.info("object downloaded")
s3_object_downloaded_md5 = utils.get_md5(
s3_object_download_path
)
s3_object_uploaded_md5 = utils.get_md5(s3_object_path)
log.info(
"s3_object_downloaded_md5: %s"
% s3_object_downloaded_md5
)
log.info(
"s3_object_uploaded_md5: %s" % s3_object_uploaded_md5
)
if str(s3_object_uploaded_md5) == str(
s3_object_downloaded_md5
):
log.info("md5 match")
utils.exec_shell_cmd(
"rm -rf %s" % s3_object_download_path
)
else:
raise TestExecError("md5 mismatch")
if config.local_file_delete is True:
log.info("deleting local file created after the upload")
utils.exec_shell_cmd("rm -rf %s" % s3_object_path)
if config.bucket_sync_crash is True:
is_primary = utils.is_cluster_primary()
if is_primary is False:
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
realm, source_zone = utils.get_realm_source_zone_info()
log.info(f"Realm name: {realm}")
log.info(f"Source zone name: {source_zone}")
for i in range(600): # Running sync command for 600 times
op = utils.exec_shell_cmd(
f"radosgw-admin bucket sync run --bucket bkt_crash_check --rgw-curl-low-speed-time=0 --source-zone {source_zone} --rgw-realm {realm}"
)
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
time.sleep(1)
if config.dynamic_resharding is True:
if utils.check_dbr_support():
reusable.check_sync_status()
for i in range(10):
time.sleep(
60
) # Adding delay for processing reshard list
op = utils.exec_shell_cmd(
f"radosgw-admin bucket stats --bucket {bucket.name}"
)
json_doc = json.loads(op)
new_num_shards = json_doc["num_shards"]
log.info(f"no_of_shards_created: {new_num_shards}")
if new_num_shards > old_num_shards:
break
else:
raise TestExecError(
"num shards are same after processing resharding"
)
if config.manual_resharding is True:
if utils.check_dbr_support():
op = utils.exec_shell_cmd(
f"radosgw-admin bucket stats --bucket {bucket.name}"
)
json_doc = json.loads(op)
old_num_shards = json_doc["num_shards"]
log.info(f"no_of_shards_created: {old_num_shards}")
op = utils.exec_shell_cmd(
f"radosgw-admin reshard add --bucket {bucket.name} --num-shards {config.shards}"
)
op = utils.exec_shell_cmd("radosgw-admin reshard process")
time.sleep(60)
op = utils.exec_shell_cmd(
f"radosgw-admin bucket stats --bucket {bucket.name}"
)
json_doc = json.loads(op)
new_num_shards = json_doc["num_shards"]
log.info(f"no_of_shards_created: {new_num_shards}")
if new_num_shards <= old_num_shards:
raise TestExecError(
"num shards are same after processing resharding"
)
# verification of shards after upload
if config.test_datalog_trim_command is True:
shard_id, end_marker = reusable.get_datalog_marker()
cmd = f"sudo radosgw-admin datalog trim --shard-id {shard_id} --end-marker {end_marker} --debug_ms=1 --debug_rgw=20"
out, err = utils.exec_shell_cmd(cmd, debug_info=True)
if "Segmentation fault" in err:
raise TestExecError("Segmentation fault occured")
if config.test_ops["sharding"]["enable"] is True:
cmd = (
"radosgw-admin metadata get bucket:%s | grep bucket_id"
% bucket.name
)
out = utils.exec_shell_cmd(cmd)
b_id = (
out.replace('"', "")
.strip()
.split(":")[1]
.strip()
.replace(",", "")
)
cmd2 = "rados -p default.rgw.buckets.index ls | grep %s" % b_id
out = utils.exec_shell_cmd(cmd2)
log.info("got output from sharing verification.--------")
# print out bucket stats and verify in logs for compressed data by
# comparing size_kb_utilized and size_kb_actual
if config.test_ops["compression"]["enable"] is True:
cmd = "radosgw-admin bucket stats --bucket=%s" % bucket.name
out = utils.exec_shell_cmd(cmd)
# print out bucket stats and verify in logs for compressed data by
# comparing size_kb_utilized and size_kb_actual
if config.test_ops["compression"]["enable"] is True:
cmd = "radosgw-admin bucket stats --bucket=%s" % bucket.name
out = utils.exec_shell_cmd(cmd)
if config.test_ops["delete_bucket_object"] is True:
reusable.delete_objects(bucket)
time.sleep(10)
reusable.check_sync_status()
reusable.delete_bucket(bucket)
# disable compression after test
if config.test_ops["compression"]["enable"] is True:
log.info("disable compression")
cmd = "radosgw-admin zone get"
out = utils.exec_shell_cmd(cmd)
zone = json.loads(out)
zone = zone.get("name")
cmd = (
"radosgw-admin zone placement modify --rgw-zone=%s "
"--placement-id=default-placement --compression=none" % zone
)
out = utils.exec_shell_cmd(cmd)
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
if config.gc_verification is True:
final_op = reusable.verify_gc()
if final_op != -1:
test_info.failed_status("test failed")
sys.exit(1)
# check sync status if a multisite cluster
reusable.check_sync_status()
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# create user
all_users_info = s3lib.create_users(config.user_count)
if config.test_ops.get("encryption_algorithm", None) is not None:
log.info("encryption enabled, making ceph config changes")
ceph_conf.set_to_ceph_conf("global", ConfigOpts.rgw_crypt_require_ssl,
"false")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
for each_user in all_users_info:
# authenticate
auth = Auth(each_user, ssl=config.ssl)
if config.use_aws4 is True:
rgw_conn = auth.do_auth(**{"signature_version": "s3v4"})
else:
rgw_conn = auth.do_auth()
objects_created_list = []
if config.test_ops["create_bucket"] is True:
log.info("no of buckets to create: %s" % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user["user_id"], rand_no=bc)
log.info("creating bucket with name: %s" %
bucket_name_to_create)
bucket = reusable.create_bucket(bucket_name_to_create,
rgw_conn, each_user)
if config.test_ops.get("enable_version", False):
log.info("enable bucket version")
reusable.enable_versioning(bucket, rgw_conn, each_user,
write_bucket_io_info)
if config.test_ops["create_object"] is True:
if config.test_ops["object_structure"] == "flat":
# uploading data
log.info("top level s3 objects to create: %s" %
config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, oc)
log.info("s3 object name: %s" % s3_object_name)
s3_object_path = os.path.join(
TEST_DATA_PATH, s3_object_name)
log.info("s3 object path: %s" % s3_object_path)
if config.test_ops.get(
"upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
objects_created_list.append(
(s3_object_name, s3_object_path))
# deleting the local file created after upload
if config.local_file_delete is True:
log.info(
"deleting local file created after the upload"
)
utils.exec_shell_cmd("rm -rf %s" %
s3_object_path)
# this covers listing of a bucket with pseudo directories and objects in it ; Unable to list contents of large buckets https://bugzilla.redhat.com/show_bug.cgi?id=1874645#c72
if config.test_ops["object_structure"] == "pseudo":
log.info(
f"pseudo directories to create {config.pseudo_dir_count} with {config.objects_count} objects in each"
)
for count in range(config.pseudo_dir_count):
s3_pseudo_dir_name = utils.gen_s3_object_name(
bucket_name_to_create, count)
s3_object_path = os.path.join(
TEST_DATA_PATH, s3_pseudo_dir_name)
manage_data.pseudo_dir_generator(s3_object_path)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_pseudo_object_name(
s3_pseudo_dir_name, oc)
log.info("s3 object name: %s" % s3_object_name)
s3_object_path = os.path.join(
TEST_DATA_PATH, s3_object_name)
log.info("s3 object path: %s" % s3_object_path)
if config.test_ops.get(
"upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
# deleting the local file created after upload
if config.local_file_delete is True:
log.info(
"deleting local file created after the upload"
)
utils.exec_shell_cmd("rm -rf %s" %
s3_object_path)
# listing bucket with only pseudo directories ; Bug allows ordered bucket listing to get stuck -- 4.1 https://bugzilla.redhat.com/show_bug.cgi?id=1853052#c0
if config.test_ops["create_object"] is False:
if config.test_ops[
"object_structure"] == "pseudo-dir-only":
log.info(
f"pseudo directories to create {config.pseudo_dir_count}"
)
for count in range(config.pseudo_dir_count):
s3_pseudo_dir_name = utils.gen_s3_object_name(
bucket_name_to_create, count)
utils.create_psuedo_dir(s3_pseudo_dir_name, bucket)
# radoslist listing of the bucket
if config.test_ops["radoslist"] is True:
log.info(
"executing the command radosgw-admin bucket radoslist "
)
radoslist = utils.exec_shell_cmd(
"radosgw-admin bucket radoslist --bucket %s" %
bucket_name_to_create)
if radoslist is False:
raise TestExecError(
"Radoslist command execution failed")
# get the configuration parameter - rgw_bucket_index_max_aio
ceph_version_id, ceph_version_name = utils.get_ceph_version()
if ceph_version_name in ["luminous", "nautilus"]:
cmd = "ceph daemon `ls -t /var/run/ceph/ceph-client.rgw.*.asok|head -1` config show |grep rgw_bucket_index_max_aio"
max_aio_output = utils.exec_shell_cmd(cmd)
max_aio = max_aio_output.split()[1]
else:
cmd = "ceph config get mon rgw_bucket_index_max_aio"
max_aio_output = utils.exec_shell_cmd(cmd)
max_aio = max_aio_output.rstrip("\n")
# bucket stats to get the num_objects of the bucket
bucket_stats = utils.exec_shell_cmd(
"radosgw-admin bucket stats --bucket %s" %
bucket_name_to_create)
bucket_stats_json = json.loads(bucket_stats)
bkt_num_objects = bucket_stats_json["usage"]["rgw.main"][
"num_objects"]
# ordered listing via radosgw-admin command and noting time taken
log.info(
"measure the execution time taken to list via radosgw-admin command"
)
if config.test_ops["radosgw_listing_ordered"] is True:
log.info("ordered listing via radosgw-admin command")
rgw_cmd_time = reusable.time_to_list_via_radosgw(
bucket_name_to_create, "ordered")
if rgw_cmd_time > 0:
rgw_cmd_time_secs = "{:.4f}".format(rgw_cmd_time)
rgw_cmd_time_mins = "{:.4f}".format(rgw_cmd_time / 60)
log.info(
f"with rgw_bucket_index_max_aio = {max_aio} time taken for ordered listing of {bkt_num_objects} objects is : {rgw_cmd_time_secs} secs ; {rgw_cmd_time_mins} mins"
)
else:
raise TestExecError(
"object listing via radosgw-admin command failed")
# unordered listing via radosgw-admin command and noting time taken
if config.test_ops["radosgw_listing_ordered"] is False:
log.info("unordered listing via radosgw-admin command")
rgw_time = reusable.time_to_list_via_radosgw(
bucket_name_to_create, "unordered")
if rgw_time > 0:
rgw_time_secs = "{:.4f}".format(rgw_time)
rgw_time_mins = "{:.4f}".format(rgw_time / 60)
log.info(
f"with rgw_bucket_index_max_aio = {max_aio} time taken for unordered listing of {bkt_num_objects} objects is : {rgw_time_secs} secs ; {rgw_time_mins} mins"
)
else:
raise TestExecError(
"object listing via radosgw-admin command failed")
# listing via boto and noting the time taken
log.info("measure the execution time taken to list via boto")
boto_time = reusable.time_to_list_via_boto(
bucket_name_to_create, rgw_conn)
if boto_time > 0:
boto_time_secs = "{:.4f}".format(boto_time)
boto_time_mins = "{:.4f}".format(boto_time / 60)
log.info(
f"with rgw_bucket_index_max_aio = {max_aio} time taken to list {bkt_num_objects} objects via boto : {boto_time_secs} secs ; {boto_time_mins} mins"
)
else:
raise TestExecError("object listing via boto failed")
# radoslist on all buckets. BZ:https://bugzilla.redhat.com/show_bug.cgi?id=1892265
if config.radoslist_all is True:
log.info(
"Executing the command radosgw-admin bucket radoslist on all buckets"
)
cmd = "radosgw-admin bucket radoslist | grep ERROR"
radoslist_all_error = utils.exec_shell_cmd(cmd)
if radoslist_all_error:
raise TestExecError("ERROR in radoslist command")
if config.test_ops.get("delete_bucket_object", False):
if config.test_ops.get("enable_version", False):
for name, path in objects_created_list:
reusable.delete_version_object(bucket, name, path,
rgw_conn, each_user)
else:
reusable.delete_objects(bucket)
time.sleep(30)
reusable.delete_bucket(bucket)
# check sync status if a multisite cluster
reusable.check_sync_status()
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
if config.user_remove is True:
reusable.remove_user(each_user)
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
log.info("starting IO")
config.user_count = 1
user_info = s3lib.create_users(config.user_count)
user_info = user_info[0]
auth = Auth(user_info, ssl=config.ssl)
rgw_conn = auth.do_auth()
log.info("sharding configuration will be added now.")
if config.sharding_type == "dynamic":
log.info("sharding type is dynamic")
# for dynamic,
# the number of shards should be greater than [ (no of objects)/(max objects per shard) ]
# example: objects = 500 ; max object per shard = 10
# then no of shards should be at least 50 or more
time.sleep(15)
log.info("making changes to ceph.conf")
ceph_conf.set_to_ceph_conf(
"global",
ConfigOpts.rgw_max_objs_per_shard,
str(config.max_objects_per_shard),
)
ceph_conf.set_to_ceph_conf("global", ConfigOpts.rgw_dynamic_resharding,
"True")
num_shards_expected = config.objects_count / config.max_objects_per_shard
log.info("num_shards_expected: %s" % num_shards_expected)
log.info("trying to restart services ")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
config.bucket_count = 1
objects_created_list = []
log.info("no of buckets to create: %s" % config.bucket_count)
bucket_name = utils.gen_bucket_name_from_userid(user_info["user_id"],
rand_no=1)
bucket = reusable.create_bucket(bucket_name, rgw_conn, user_info)
if config.test_ops.get("enable_version", False):
log.info("enable bucket version")
reusable.enable_versioning(bucket, rgw_conn, user_info,
write_bucket_io_info)
log.info("s3 objects to create: %s" % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(bucket.name, oc)
s3_object_path = os.path.join(TEST_DATA_PATH, s3_object_name)
if config.test_ops.get("enable_version", False):
reusable.upload_version_object(
config,
user_info,
rgw_conn,
s3_object_name,
config.obj_size,
bucket,
TEST_DATA_PATH,
)
else:
reusable.upload_object(s3_object_name, bucket, TEST_DATA_PATH,
config, user_info)
objects_created_list.append((s3_object_name, s3_object_path))
if config.sharding_type == "manual":
log.info("sharding type is manual")
# for manual.
# the number of shards will be the value set in the command.
time.sleep(15)
log.info("in manual sharding")
cmd_exec = utils.exec_shell_cmd(
"radosgw-admin bucket reshard --bucket=%s --num-shards=%s "
"--yes-i-really-mean-it" % (bucket.name, config.shards))
if cmd_exec is False:
raise TestExecError("manual resharding command execution failed")
sleep_time = 600
log.info(f"verification starts after waiting for {sleep_time} seconds")
time.sleep(sleep_time)
op = utils.exec_shell_cmd("radosgw-admin bucket stats --bucket %s" %
bucket.name)
json_doc = json.loads(op)
num_shards_created = json_doc["num_shards"]
log.info("no_of_shards_created: %s" % num_shards_created)
if config.sharding_type == "manual":
if config.shards != num_shards_created:
raise TestExecError("expected number of shards not created")
log.info("Expected number of shards created")
if config.sharding_type == "dynamic":
log.info("Verify if resharding list is empty")
reshard_list_op = json.loads(
utils.exec_shell_cmd("radosgw-admin reshard list"))
if not reshard_list_op:
log.info(
"for dynamic number of shards created should be greater than or equal to number of expected shards"
)
log.info("no_of_shards_expected: %s" % num_shards_expected)
if int(num_shards_created) >= int(num_shards_expected):
log.info("Expected number of shards created")
else:
raise TestExecError("Expected number of shards not created")
if config.test_ops.get("delete_bucket_object", False):
if config.test_ops.get("enable_version", False):
for name, path in objects_created_list:
reusable.delete_version_object(bucket, name, path, rgw_conn,
user_info)
else:
reusable.delete_objects(bucket)
reusable.delete_bucket(bucket)
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
"""
Executes test based on configuration passed
Args:
config(object): Test configuration
"""
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
umgmt = UserMgmt()
ceph_conf = CephConfOp()
rgw_service = RGWService()
# preparing data
user_name = resource_op.create_users(no_of_users_to_create=1)[0]["user_id"]
tenant = "tenant"
tenant_user_info = umgmt.create_tenant_user(tenant_name=tenant,
user_id=user_name,
displayname=user_name)
umgmt.create_subuser(tenant_name=tenant, user_id=user_name)
ip_and_port = s3cmd_reusable.get_rgw_ip_and_port()
s3_auth.do_auth(tenant_user_info, ip_and_port)
bucket_name = utils.gen_bucket_name_from_userid(user_name, rand_no=0)
# Create a bucket
s3cmd_reusable.create_bucket(bucket_name)
log.info(f"Bucket {bucket_name} created")
# Upload a 2GB file to bucket
uploaded_file_info = s3cmd_reusable.upload_file(
bucket_name, file_size=2147483648, test_data_path=TEST_DATA_PATH)
uploaded_file = uploaded_file_info["name"]
uploaded_file_md5 = uploaded_file_info["md5"]
log.info(f"Uploaded file {uploaded_file} to bucket {bucket_name}")
if config.gc_verification is True:
log.info("making changes to ceph.conf")
config.rgw_gc_obj_min_wait = 5
ceph_conf.set_to_ceph_conf(
"global",
ConfigOpts.rgw_gc_obj_min_wait,
str(config.rgw_gc_obj_min_wait),
)
log.info("trying to restart services")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
log.info(
"download large object again to make gc list with shadow entries")
downloaded_file1 = s3cmd_reusable.download_file(
bucket_name,
uploaded_file,
local_file_name="download1.img",
test_data_path=TEST_DATA_PATH,
)
time.sleep(5)
downloaded_file1_md5 = utils.get_md5(downloaded_file1)
assert uploaded_file_md5 == downloaded_file1_md5
gc_list_output = json.loads(
utils.exec_shell_cmd("radosgw-admin gc list --include-all"))
log.info(gc_list_output)
if gc_list_output:
log.info(
"Shadow obj found after setting rgw_gc_obj_min_wait to 5 sec")
utils.exec_shell_cmd("radosgw-admin gc process --include-all")
log.info(
"Object download should not error out in 404 NoSuchKey error")
downloaded_file2 = s3cmd_reusable.download_file(
bucket_name,
uploaded_file,
local_file_name="download2.img",
test_data_path=TEST_DATA_PATH,
)
downloaded_file2_md5 = utils.get_md5(downloaded_file2)
assert uploaded_file_md5 == downloaded_file2_md5
# Delete file from bucket
s3cmd_reusable.delete_file(bucket_name, uploaded_file)
log.info(f"Deleted file {uploaded_file} from bucket {bucket_name}")
# Delete bucket
s3cmd_reusable.delete_bucket(bucket_name)
log.info(f"Bucket {bucket_name} deleted")
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
umgmt = UserMgmt()
ceph_conf = CephConfOp()
log.info(type(ceph_conf))
rgw_service = RGWService()
# preparing data
user_names = ["tuffy", "scooby", "max"]
tenant = "tenant"
tenant_user_info = umgmt.create_tenant_user(tenant_name=tenant,
user_id=user_names[0],
displayname=user_names[0])
user_info = umgmt.create_subuser(tenant_name=tenant, user_id=user_names[0])
auth = Auth(user_info)
rgw = auth.do_auth()
for cc in range(config.container_count):
if config.version_enable is True:
log.info("making changes to ceph.conf")
ceph_conf.set_to_ceph_conf("global",
ConfigOpts.rgw_swift_versioning_enabled,
"True")
log.info("trying to restart services ")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
container_name_old = utils.gen_bucket_name_from_userid(
user_info["user_id"], rand_no=str(cc) + "old")
log.info(container_name_old)
container = swiftlib.resource_op({
"obj":
rgw,
"resource":
"put_container",
"kwargs":
dict(container=container_name_old),
})
container_name = utils.gen_bucket_name_from_userid(
user_info["user_id"], rand_no=str(cc) + "new")
log.info(container_name)
container = swiftlib.resource_op({
"obj":
rgw,
"resource":
"put_container",
"args": [
container_name,
{
"X-Versions-Location": container_name_old
},
],
})
if container is False:
raise TestExecError(
"Resource execution failed: container creation failed")
ls = []
swift_object_name = ""
for version_count in range(config.version_count):
for oc, size in list(config.mapped_sizes.items()):
swift_object_name = fill_container(rgw, container_name,
user_names[0], oc, cc,
size)
ls = rgw.get_container(container_name_old)
ls = list(ls)
if config.copy_version_object is True:
old_obj_name = ls[1][config.version_count - 2]["name"]
log.info(old_obj_name)
container = swiftlib.resource_op({
"obj":
rgw,
"resource":
"copy_object",
"kwargs":
dict(
container=container_name_old,
obj=old_obj_name,
destination=container_name + "/" + swift_object_name,
),
})
if container is False:
raise TestExecError("Resource execution failed")
log.info("Successfully copied item")
else:
current_count = "radosgw-admin bucket stats --uid={uid} --tenant={tenant} --bucket='{bucket}' ".format(
uid=user_names[0], tenant=tenant, bucket=container_name)
num_obj_current = utils.exec_shell_cmd(current_count)
num_obj_current = json.loads(num_obj_current)
num_obj_current = (num_obj_current[0].get("usage").get(
"rgw.main").get("num_objects"))
old_count = "radosgw-admin bucket stats --uid={uid} --tenant={tenant} --bucket='{bucket}' ".format(
uid=user_names[0],
tenant=tenant,
bucket=container_name_old)
num_obj_old = utils.exec_shell_cmd(old_count)
num_obj_old = json.loads(num_obj_old)
num_obj_old = (num_obj_old[0].get("usage").get("rgw.main").get(
"num_objects"))
version_count_from_config = (
config.objects_count *
config.version_count) - config.objects_count
if (num_obj_current == config.objects_count) and (
num_obj_old == version_count_from_config):
log.info("objects and versioned obbjects are correct")
else:
test_info.failed_status("test failed")
elif config.object_expire is True:
container_name = utils.gen_bucket_name_from_userid(
user_info["user_id"], rand_no=cc)
container = swiftlib.resource_op({
"obj": rgw,
"resource": "put_container",
"args": [container_name]
})
if container is False:
raise TestExecError(
"Resource execution failed: container creation failed")
for oc, size in list(config.mapped_sizes.items()):
swift_object_name = fill_container(
rgw,
container_name,
user_names[0],
oc,
cc,
size,
header={"X-Delete-After": 5},
)
time.sleep(7)
container_exists = swiftlib.resource_op({
"obj":
rgw,
"resource":
"get_object",
"args": [container_name, swift_object_name],
})
log.info(container_exists)
if container_exists:
msg = "test failed as the objects are still present"
test_info.failed_status(msg)
raise TestExecError(msg)
elif config.large_object_upload is True:
container_name = utils.gen_bucket_name_from_userid(
user_info["user_id"], rand_no=cc)
container = swiftlib.resource_op({
"obj": rgw,
"resource": "put_container",
"args": [container_name]
})
if container is False:
raise TestExecError(
"Resource execution failed: container creation failed")
for oc, size in list(config.mapped_sizes.items()):
swift_object_name = fill_container(
rgw,
container_name,
user_names[0],
oc,
cc,
size,
multipart=True,
split_size=config.split_size,
)
container_name_new = utils.gen_bucket_name_from_userid(
user_info["user_id"], rand_no=str(cc) + "New")
container = swiftlib.resource_op({
"obj":
rgw,
"resource":
"put_container",
"kwargs":
dict(container=container_name_new),
})
if container is False:
raise TestExecError(
"Resource execution failed: container creation failed")
container = swiftlib.resource_op({
"obj":
rgw,
"resource":
"put_object",
"kwargs":
dict(
container=container_name_new,
obj=swift_object_name,
contents=None,
headers={
"X-Object-Manifest":
container_name + "/" + swift_object_name + "/"
},
),
})
if container is False:
raise TestExecError(
"Resource execution failed: container creation failed")
if config.large_object_download is True:
swift_old_object_path = os.path.join(
TEST_DATA_PATH, swift_object_name)
swift_object_download_fname = swift_object_name + ".download"
log.info("download object name: %s" %
swift_object_download_fname)
swift_object_download_path = os.path.join(
TEST_DATA_PATH, swift_object_download_fname)
log.info("download object path: %s" %
swift_object_download_path)
swift_object_downloaded = rgw.get_object(
container_name_new, swift_object_name)
with open(swift_object_download_path, "wb") as fp:
fp.write(swift_object_downloaded[1])
old_object = utils.get_md5(swift_old_object_path)
downloaded_obj = utils.get_md5(swift_object_download_path)
log.info("s3_object_downloaded_md5: %s" % old_object)
log.info("s3_object_uploaded_md5: %s" % downloaded_obj)
if str(old_object) == str(downloaded_obj):
log.info("md5 match")
utils.exec_shell_cmd("rm -rf %s" %
swift_object_download_path)
else:
raise TestExecError("md5 mismatch")
else:
container_name = utils.gen_bucket_name_from_userid(
user_info["user_id"], rand_no=cc)
container = swiftlib.resource_op({
"obj": rgw,
"resource": "put_container",
"args": [container_name]
})
if container is False:
raise TestExecError(
"Resource execution failed: container creation failed")
for oc, size in list(config.mapped_sizes.items()):
swift_object_name = fill_container(rgw, container_name,
user_names[0], oc, cc, size)
# download object
swift_object_download_fname = swift_object_name + ".download"
log.info("download object name: %s" %
swift_object_download_fname)
swift_object_download_path = os.path.join(
TEST_DATA_PATH, swift_object_download_fname)
log.info("download object path: %s" %
swift_object_download_path)
swift_object_downloaded = rgw.get_object(
container_name, swift_object_name)
with open(swift_object_download_path, "w") as fp:
fp.write(str(swift_object_downloaded[1]))
# modify and re-upload
log.info("appending new message to test_data")
message_to_append = "adding new msg after download"
fp = open(swift_object_download_path, "a+")
fp.write(message_to_append)
fp.close()
with open(swift_object_download_path, "r") as fp:
rgw.put_object(
container_name,
swift_object_name,
contents=fp.read(),
content_type="text/plain",
)
# delete object
log.info("deleting swift object")
rgw.delete_object(container_name, swift_object_name)
# delete container
log.info("deleting swift container")
rgw.delete_container(container_name)
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
reusable.remove_user(tenant_user_info, tenant=tenant)
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# create user
all_users_info = s3lib.create_users(config.user_count)
for each_user in all_users_info:
# authenticate
auth = Auth(each_user, ssl=config.ssl)
rgw_conn = auth.do_auth()
# authenticate sns client.
rgw_sns_conn = auth.do_auth_sns_client()
# authenticate with s3 client
rgw_s3_client = auth.do_auth_using_client()
# get ceph version
ceph_version_id, ceph_version_name = utils.get_ceph_version()
objects_created_list = []
if config.test_ops["create_bucket"] is True:
log.info("no of buckets to create: %s" % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user["user_id"], rand_no=bc)
bucket = reusable.create_bucket(bucket_name_to_create,
rgw_conn, each_user)
if config.test_ops.get("enable_version", False):
log.info("enable bucket version")
reusable.enable_versioning(bucket, rgw_conn, each_user,
write_bucket_io_info)
# create topic with endpoint
if config.test_ops["create_topic"] is True:
endpoint = config.test_ops.get("endpoint")
ack_type = config.test_ops.get("ack_type")
topic_id = str(uuid.uuid4().hex[:16])
persistent = False
topic_name = "cephci-kafka-" + ack_type + "-ack-type-" + topic_id
log.info(
f"creating a topic with {endpoint} endpoint with ack type {ack_type}"
)
if config.test_ops.get("persistent_flag", False):
log.info("topic with peristent flag enabled")
persistent = config.test_ops.get("persistent_flag")
topic = notification.create_topic(rgw_sns_conn, endpoint,
ack_type, topic_name,
persistent)
# get topic attributes
if config.test_ops.get("get_topic_info", False):
log.info("get topic attributes")
get_topic_info = notification.get_topic(
rgw_sns_conn, topic, ceph_version_name)
# put bucket notification with topic configured for event
if config.test_ops["put_get_bucket_notification"] is True:
event = config.test_ops.get("event_type")
notification_name = "notification-" + str(event)
notification.put_bucket_notification(
rgw_s3_client,
bucket_name_to_create,
notification_name,
topic,
event,
)
# get bucket notification
log.info(
f"get bucket notification for bucket : {bucket_name_to_create}"
)
notification.get_bucket_notification(
rgw_s3_client, bucket_name_to_create)
# create objects
if config.test_ops["create_object"] is True:
# uploading data
log.info("s3 objects to create: %s" % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, oc)
log.info("s3 object name: %s" % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH,
s3_object_name)
log.info("s3 object path: %s" % s3_object_path)
if config.test_ops.get("upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
# copy objects
if config.test_ops.get("copy_object", False):
log.info("copy object")
status = rgw_s3_client.copy_object(
Bucket=bucket_name_to_create,
Key="copy_of_object" + s3_object_name,
CopySource={
"Bucket": bucket_name_to_create,
"Key": s3_object_name,
},
)
if status is None:
raise TestExecError("copy object failed")
# delete objects
if config.test_ops.get("delete_bucket_object", False):
if config.test_ops.get("enable_version", False):
for name, path in objects_created_list:
reusable.delete_version_object(bucket, name, path,
rgw_conn, each_user)
else:
reusable.delete_objects(bucket)
# start kafka broker and consumer
event_record_path = "/home/cephuser/event_record"
start_consumer = notification.start_kafka_broker_consumer(
topic_name, event_record_path)
if start_consumer is False:
raise TestExecError("Kafka consumer not running")
# verify all the attributes of the event record. if event not received abort testcase
log.info("verify event record attributes")
verify = notification.verify_event_record(event,
bucket_name_to_create,
event_record_path,
ceph_version_name)
if verify is False:
raise EventRecordDataError(
"Event record is empty! notification is not seen")
# delete topic logs on kafka broker
notification.del_topic_from_kafka_broker(topic_name)
# check sync status if a multisite cluster
reusable.check_sync_status()
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# create user
all_users_info = s3lib.create_users(config.user_count)
if config.test_ops.get("encryption_algorithm", None) is not None:
log.info("encryption enabled, making ceph config changes")
ceph_conf.set_to_ceph_conf("global", ConfigOpts.rgw_crypt_require_ssl,
"false")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
for each_user in all_users_info:
# authenticate
auth = Auth(each_user, ssl=config.ssl) # ,config=config)
if config.use_aws4 is True:
rgw_conn = auth.do_auth(**{"signature_version": "s3v4"})
else:
rgw_conn = auth.do_auth()
user_id = each_user["user_id"]
# Creating a seed for multi-factor authentication
log.info("Creating a seed for multi-factor authentication")
cmd = "head -10 /dev/urandom | sha512sum | cut -b 1-30"
SEED = utils.exec_shell_cmd(cmd)
log.info(
"Configure the one-time password generator oathtool and the back-end MFA system to use the same seed."
)
test_totp = reusable.generate_totp(SEED)
serial = "MFAtest" + str(random.randrange(1, 100))
if test_totp is False:
raise TestExecError(
"Failed to configure one-time password generator - oathtool")
if config.test_ops["mfa_create"] is True:
log.info("Create a new MFA TOTP token")
cmd = f"time radosgw-admin mfa create --uid={user_id} --totp-serial={serial} --totp-seed={SEED}"
mfa_create = utils.exec_shell_cmd(cmd)
if mfa_create is False:
raise TestExecError("Failed to create new MFA TOTP token!")
# Verify no crash is seen with in correct syntax for mfa resync command BZ:https://bugzilla.redhat.com/show_bug.cgi?id=1947862
if config.test_ops.get("mfa_resync_invalid_syntax") is True:
log.info(
"Validate the mfa resync command errors out with approriate message on invalid syntax"
)
get_totp = reusable.generate_totp(SEED)
cmd = f"radosgw-admin mfa resync --uid {user_id} --totp-serial={serial} --totp-seed={SEED} --totp-pin={get_totp}"
mfa_resync_invalid_syntax = utils.exec_shell_cmd(cmd)
if mfa_resync_invalid_syntax is False:
log.info("appropriate usage message displayed")
else:
raise TestExecError("Usage message not displayed")
if config.test_ops["mfa_check"] is True:
log.info(
"Test a multi-factor authentication (MFA) time-based one time password (TOTP) token."
)
get_totp = reusable.generate_totp(SEED)
cmd = (
"time radosgw-admin mfa check --uid=%s --totp-serial=%s --totp-pin=%s"
% (each_user["user_id"], serial, get_totp))
cmd = f"time radosgw-admin mfa check --uid={user_id} --totp-serial={serial} --totp-pin={get_totp}"
mfa_check = utils.exec_shell_cmd(cmd)
if mfa_check is False:
log.info(
"Resynchronize a multi-factor authentication TOTP token in case of time skew or failed checks."
)
previous_pin = reusable.generate_totp(SEED)
log.info("Sleep of 30 seconds to fetch another totp")
time.sleep(30)
current_pin = reusable.generate_totp(SEED)
cmd = "time radosgw-admin mfa resync --uid {user_id} --totp-serial {serial} --totp-pin {get_totp} --totp-pin {get_totp}"
mfa_resync = utils.exec_shell_cmd(cmd)
if mfa_resync is False:
raise TestExecError("Failed to resync token")
log.info(
"Verify the token was successfully resynchronized by testing a new PIN"
)
get_totp = reusable.generate_totp(SEED)
cmd = f"time radosgw-admin mfa check --uid {user_id} --totp-serial {serial} --totp-pin {get_totp}"
mfa_check_resync = utils.exec_shell_cmd(cmd)
if "ok" not in mfa_check_resync:
raise TestExecError("Failed to verify resync token")
if config.test_ops["mfa_list"] is True:
log.info("List MFA TOTP tokens")
cmd = f"radosgw-admin mfa list --uid {user_id}"
mfa_list = utils.exec_shell_cmd(cmd)
if "MFAtest" in mfa_list:
log.info("MFA token is listed for the given user")
objects_created_list = []
if config.test_ops["create_bucket"] is True:
log.info("no of buckets to create: %s" % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user["user_id"], rand_no=bc)
log.info("creating bucket with name: %s" %
bucket_name_to_create)
bucket = reusable.create_bucket(bucket_name_to_create,
rgw_conn, each_user)
if config.test_ops.get("enable_mfa_version", False):
log.info("enable bucket versioning and MFA deletes")
token, status = reusable.enable_mfa_versioning(
bucket, rgw_conn, SEED, serial, each_user,
write_bucket_io_info)
if status is False:
log.info(
"trying again! AccessDenied could be a timing issue!"
)
new_token = reusable.generate_totp(SEED)
if token == new_token:
log.info(
"sleep of 30secs to generate another TOTP token"
)
time.sleep(30)
status = reusable.enable_mfa_versioning(
bucket,
rgw_conn,
SEED,
serial,
each_user,
write_bucket_io_info,
)
if status is False:
raise MFAVersionError(
"Failed to enable MFA and versioning on the bucket!"
)
if config.test_ops["create_object"] is True:
# uploading data
log.info(
f"top level s3 objects to create: {config.objects_count}"
)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, oc)
log.info(f"s3 object name: {s3_object_name}")
s3_object_path = os.path.join(TEST_DATA_PATH,
s3_object_name)
log.info(f"s3 object path: {s3_object_path}")
if config.test_ops.get("upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
each_user,
)
objects_created_list.append(
(s3_object_name, s3_object_path))
# deleting the local file created after upload
if config.local_file_delete is True:
log.info(
"deleting local file created after the upload")
cmd = f"rm -rf {s3_object_path}"
utils.exec_shell_cmd(cmd)
# bucket list to check the objects
cmd = f"radosgw-admin bucket list --bucket {bucket_name_to_create}"
bucket_list = utils.exec_shell_cmd(cmd)
if config.test_ops["delete_mfa_object"] is True:
for s3_object_name, path in objects_created_list:
log.info(
"Deleting an object configured with MFA should have TOTP token"
)
versions = bucket.object_versions.filter(
Prefix=s3_object_name)
for version in versions:
log.info(
f"key_name: {version.object_key} --> version_id: {version.version_id}"
)
log.info("Deleting the object with TOTP token")
get_totp = reusable.generate_totp(SEED)
cmd = f"radosgw-admin object rm --object {version.object_key} --object-version {version.version_id} --totp-pin {get_totp} --bucket {bucket_name_to_create}"
object_delete = utils.exec_shell_cmd(cmd)
if object_delete is False:
raise TestExecError(
"Object deletion with MFA token failed!")
log.info("Verify object is deleted permanently")
cmd = f"radosgw-admin bucket list --bucket {bucket_name_to_create}"
bucket_list = utils.exec_shell_cmd(cmd)
if version.version_id in bucket_list:
raise TestExecError(
"Object version is still present, Failed to delete the object"
)
if config.test_ops["delete_bucket"] is True:
log.info(f"Deleting the bucket {bucket_name_to_create}")
time.sleep(10)
reusable.delete_bucket(bucket)
if config.test_ops["remove_mfa"] is True:
log.info(
"Delete a multi-factor authentication (MFA) time-based one time password (TOTP) token"
)
cmd = f"radosgw-admin mfa remove --uid {user_id} --totp-serial {serial}"
mfa_remove = utils.exec_shell_cmd(cmd)
if mfa_remove is False:
raise TestExecError("MFA delete failed")
log.info("Verify the MFA token is deleted")
cmd = (
f"radosgw-admin mfa get --uid {user_id} --totp-serial {serial}"
)
mfa_get = utils.exec_shell_cmd(cmd)
if mfa_get is False:
log.info("MFA token successfully deleted for user")
else:
raise TestExecError("MFA token delete for user failed")
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_config_set = CephConfOp()
rgw_service = RGWService()
if config.sts is None:
raise TestExecError("sts policies are missing in yaml config")
# create users
config.user_count = 2
users_info = s3lib.create_users(config.user_count)
# user1 is the owner
user1, user2 = users_info[0], users_info[1]
log.info("adding sts config to ceph.conf")
sesison_encryption_token = "abcdefghijklmnoq"
ceph_config_set.set_to_ceph_conf(
"global", ConfigOpts.rgw_sts_key, sesison_encryption_token
)
ceph_config_set.set_to_ceph_conf("global", ConfigOpts.rgw_s3_auth_use_sts, "True")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info("RGW service restarted")
auth = Auth(user1, ssl=config.ssl)
iam_client = auth.do_auth_iam_client()
policy_document = json.dumps(config.sts["policy_document"]).replace(" ", "")
policy_document = policy_document.replace("<user_name>", user2["user_id"])
role_policy = json.dumps(config.sts["role_policy"]).replace(" ", "")
add_caps_cmd = (
'sudo radosgw-admin caps add --uid="{user_id}" --caps="roles=*"'.format(
user_id=user1["user_id"]
)
)
utils.exec_shell_cmd(add_caps_cmd)
role_name = f"S3RoleOf.{user1['user_id']}"
log.info(f"role_name: {role_name}")
log.info("creating role")
create_role_response = iam_client.create_role(
AssumeRolePolicyDocument=policy_document,
Path="/",
RoleName=role_name,
)
log.info("create_role_response")
log.info(create_role_response)
policy_name = f"policy.{user1['user_id']}"
log.info(f"policy_name: {policy_name}")
log.info("putting role policy")
put_policy_response = iam_client.put_role_policy(
RoleName=role_name, PolicyName=policy_name, PolicyDocument=role_policy
)
log.info("put_policy_response")
log.info(put_policy_response)
auth = Auth(user2, ssl=config.ssl)
sts_client = auth.do_auth_sts_client()
log.info("assuming role")
assume_role_response = sts_client.assume_role(
RoleArn=create_role_response["Role"]["Arn"],
RoleSessionName=user1["user_id"],
DurationSeconds=3600,
)
log.info(assume_role_response)
assumed_role_user_info = {
"access_key": assume_role_response["Credentials"]["AccessKeyId"],
"secret_key": assume_role_response["Credentials"]["SecretAccessKey"],
"session_token": assume_role_response["Credentials"]["SessionToken"],
"user_id": user2["user_id"],
}
log.info("got the credentials after assume role")
s3client = Auth(assumed_role_user_info, ssl=config.ssl)
s3_client_rgw = s3client.do_auth()
io_info_initialize.initialize(basic_io_structure.initial())
write_user_info = AddUserInfo()
basic_io_structure = BasicIOInfoStructure()
user_info = basic_io_structure.user(
**{
"user_id": assumed_role_user_info["user_id"],
"access_key": assumed_role_user_info["access_key"],
"secret_key": assumed_role_user_info["secret_key"],
}
)
write_user_info.add_user_info(user_info)
buckets_created = []
if config.test_ops["create_bucket"] is True:
log.info("no of buckets to create: %s" % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name = utils.gen_bucket_name_from_userid(
assumed_role_user_info["user_id"], rand_no=bc
)
log.info("creating bucket with name: %s" % bucket_name)
bucket = reusable.create_bucket(
bucket_name, s3_client_rgw, assumed_role_user_info
)
buckets_created.append(bucket)
if config.test_ops["create_object"] is True:
for bucket in buckets_created:
# uploading data
log.info("s3 objects to create: %s" % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(bucket.name, oc)
log.info("s3 object name: %s" % s3_object_name)
s3_object_path = os.path.join(TEST_DATA_PATH, s3_object_name)
log.info("s3 object path: %s" % s3_object_path)
if config.test_ops.get("upload_type") == "multipart":
log.info("upload type: multipart")
reusable.upload_mutipart_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
assumed_role_user_info,
)
else:
log.info("upload type: normal")
reusable.upload_object(
s3_object_name,
bucket,
TEST_DATA_PATH,
config,
assumed_role_user_info,
)
if config.test_ops["server_side_copy"] is True:
bucket1, bucket2 = buckets_created
# copy object1 from bucket1 to bucket2 with the same name as in bucket1
log.info("copying first object from bucket1 to bucket2")
all_keys_in_buck1 = []
for obj in bucket1.objects.all():
all_keys_in_buck1.append(obj.key)
copy_source = {"Bucket": bucket1.name, "Key": all_keys_in_buck1[0]}
copy_object_name = all_keys_in_buck1[0] + "_copied_obj"
log.info(f"copy object name: {copy_object_name}")
bucket2.copy(copy_source, copy_object_name)
# list the objects in bucket2
log.info("listing all objects im bucket2 after copy")
all_bucket2_objs = []
for obj in bucket2.objects.all():
log.info(obj.key)
all_bucket2_objs.append(obj.key)
# check for object existence in bucket2
if copy_object_name in all_bucket2_objs:
log.info("server side copy successful")
else:
raise TestExecError("server side copy operation was not successful")
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
test_info = AddTestInfo('RGW Dynamic Resharding test')
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
try:
test_info.started_info()
log.info('starting IO')
config.max_objects_per_shard = 10
config.no_of_shards = 10
config.user_count = 1
user_info = s3lib.create_users(config.user_count)
user_info = user_info[0]
auth = Auth(user_info)
rgw_conn = auth.do_auth()
config.bucket_count = 1
log.info('no of buckets to create: %s' % config.bucket_count)
bucket_name = utils.gen_bucket_name_from_userid(user_info['user_id'],
rand_no=1)
bucket = create_bucket_with_versioning(rgw_conn, user_info,
bucket_name)
upload_objects(user_info, bucket, config)
log.info('sharding configuration will be added now.')
if config.sharding_type == 'online':
log.info('sharding type is online')
# for online,
# the number of shards should be greater than [ (no of objects)/(max objects per shard) ]
# example: objects = 500 ; max object per shard = 10
# then no of shards should be at least 50 or more
time.sleep(15)
log.info('making changes to ceph.conf')
ceph_conf.set_to_ceph_conf('global',
ConfigOpts.rgw_max_objs_per_shard,
config.max_objects_per_shard)
ceph_conf.set_to_ceph_conf('global',
ConfigOpts.rgw_dynamic_resharding, True)
num_shards_expected = config.objects_count / config.max_objects_per_shard
log.info('num_shards_expected: %s' % num_shards_expected)
log.info('trying to restart services ')
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
if config.sharding_type == 'offline':
log.info('sharding type is offline')
# for offline.
# the number of shards will be the value set in the command.
time.sleep(15)
log.info('in offline sharding')
cmd_exec = utils.exec_shell_cmd(
'radosgw-admin bucket reshard --bucket=%s --num-shards=%s' %
(bucket.name, config.no_of_shards))
if cmd_exec is False:
raise TestExecError(
"offline resharding command execution failed")
# upload_objects(user_info, bucket, config)
log.info('s3 objects to create: %s' % config.objects_count)
for oc in range(config.objects_count):
s3_object_name = utils.gen_s3_object_name(
bucket.name, config.objects_count + oc)
resuables.upload_object(s3_object_name, bucket, TEST_DATA_PATH,
config, user_info)
time.sleep(300)
log.info('verification starts')
op = utils.exec_shell_cmd("radosgw-admin metadata get bucket:%s" %
bucket.name)
json_doc = json.loads(op)
bucket_id = json_doc['data']['bucket']['bucket_id']
op2 = utils.exec_shell_cmd(
"radosgw-admin metadata get bucket.instance:%s:%s" %
(bucket.name, bucket_id))
json_doc2 = json.loads((op2))
num_shards_created = json_doc2['data']['bucket_info']['num_shards']
log.info('no_of_shards_created: %s' % num_shards_created)
log.info('no_of_shards_expected: %s' % num_shards_expected)
if config.sharding_type == 'offline':
if num_shards_expected != num_shards_created:
raise TestExecError("expected number of shards not created")
log.info('Expected number of shards created')
if config.sharding_type == 'online':
log.info(
'for online, '
'number of shards created should be greater than or equal to number of expected shards'
)
if int(num_shards_created) >= int(num_shards_expected):
log.info('Expected number of shards created')
else:
raise TestExecError('Expected number of shards not created')
read_io = ReadIOInfo()
read_io.yaml_fname = 'io_info.yaml'
read_io.verify_io()
test_info.success_status('test passed')
sys.exit(0)
except Exception, e:
log.info(e)
log.info(traceback.format_exc())
test_info.failed_status('test failed')
sys.exit(1)
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
log.info('starting IO')
config.user_count = 1
user_info = s3lib.create_users(config.user_count)
user_info = user_info[0]
auth = Auth(user_info, ssl=config.ssl)
rgw_conn = auth.do_auth()
log.info('sharding configuration will be added now.')
if config.sharding_type == 'dynamic':
log.info('sharding type is dynamic')
# for dynamic,
# the number of shards should be greater than [ (no of objects)/(max objects per shard) ]
# example: objects = 500 ; max object per shard = 10
# then no of shards should be at least 50 or more
time.sleep(15)
log.info('making changes to ceph.conf')
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_max_objs_per_shard,
str(config.max_objects_per_shard))
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_dynamic_resharding,
'True')
num_shards_expected = config.objects_count / config.max_objects_per_shard
log.info('num_shards_expected: %s' % num_shards_expected)
log.info('trying to restart services ')
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
config.bucket_count = 1
objects_created_list = []
log.info('no of buckets to create: %s' % config.bucket_count)
bucket_name = utils.gen_bucket_name_from_userid(user_info['user_id'],
rand_no=1)
bucket = reusable.create_bucket(bucket_name, rgw_conn, user_info)
if config.test_ops.get('enable_version', False):
log.info('enable bucket version')
reusable.enable_versioning(bucket, rgw_conn, user_info,
write_bucket_io_info)
log.info('s3 objects to create: %s' % config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(bucket.name, oc)
s3_object_path = os.path.join(TEST_DATA_PATH, s3_object_name)
if config.test_ops.get('enable_version', False):
reusable.upload_version_object(config, user_info, rgw_conn,
s3_object_name, config.obj_size,
bucket, TEST_DATA_PATH)
else:
reusable.upload_object(s3_object_name, bucket, TEST_DATA_PATH,
config, user_info)
objects_created_list.append((s3_object_name, s3_object_path))
if config.sharding_type == 'manual':
log.info('sharding type is manual')
# for manual.
# the number of shards will be the value set in the command.
time.sleep(15)
log.info('in manual sharding')
cmd_exec = utils.exec_shell_cmd(
'radosgw-admin bucket reshard --bucket=%s --num-shards=%s '
'--yes-i-really-mean-it' % (bucket.name, config.shards))
if cmd_exec is False:
raise TestExecError("manual resharding command execution failed")
sleep_time = 600
log.info(f'verification starts after waiting for {sleep_time} seconds')
time.sleep(sleep_time)
op = utils.exec_shell_cmd("radosgw-admin metadata get bucket:%s" %
bucket.name)
json_doc = json.loads(op)
bucket_id = json_doc['data']['bucket']['bucket_id']
op2 = utils.exec_shell_cmd(
"radosgw-admin metadata get bucket.instance:%s:%s" %
(bucket.name, bucket_id))
json_doc2 = json.loads((op2))
num_shards_created = json_doc2['data']['bucket_info']['num_shards']
log.info('no_of_shards_created: %s' % num_shards_created)
if config.sharding_type == 'manual':
if config.shards != num_shards_created:
raise TestExecError("expected number of shards not created")
log.info('Expected number of shards created')
if config.sharding_type == 'dynamic':
log.info('Verify if resharding list is empty')
reshard_list_op = json.loads(
utils.exec_shell_cmd("radosgw-admin reshard list"))
if not reshard_list_op:
log.info(
'for dynamic number of shards created should be greater than or equal to number of expected shards'
)
log.info('no_of_shards_expected: %s' % num_shards_expected)
if int(num_shards_created) >= int(num_shards_expected):
log.info('Expected number of shards created')
else:
raise TestExecError('Expected number of shards not created')
if config.test_ops.get('delete_bucket_object', False):
if config.test_ops.get('enable_version', False):
for name, path in objects_created_list:
reusable.delete_version_object(bucket, name, path, rgw_conn,
user_info)
else:
reusable.delete_objects(bucket)
reusable.delete_bucket(bucket)
def test_exec(config):
"""
Executes test based on configuration passed
Args:
config(object): Test configuration
"""
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
umgmt = UserMgmt()
ceph_conf = CephConfOp()
rgw_service = RGWService()
# preparing data
user_names = ["tom", "ram", "sam"]
tenant = "tenant"
tenant_user_info = umgmt.create_tenant_user(
tenant_name=tenant, user_id=user_names[1], displayname=user_names[1]
)
user_info = umgmt.create_subuser(tenant_name=tenant, user_id=user_names[1])
auth = Auth(user_info, config.ssl)
rgw = auth.do_auth()
container_name = utils.gen_bucket_name_from_userid(user_info["user_id"], rand_no=0)
container = swiftlib.resource_op(
{"obj": rgw, "resource": "put_container", "args": [container_name]}
)
if container is False:
raise TestExecError("Resource execution failed: container creation faield")
for oc, size in list(config.mapped_sizes.items()):
# upload objects to the container
swift_object_name = fill_container(
rgw, container_name, user_names[1], oc, 0, size
)
# delete all uploaded objects
log.info("deleting all swift objects")
auth_response = rgw.get_auth()
token = auth_response[1]
# test.txt file should contain container_name
with open("test.txt", "w") as f:
f.write(container_name)
ip_and_port = rgw.authurl.split("/")[2]
proto = "https" if config.ssl else "http"
url = f"{proto}://{ip_and_port}/swift/v1/?bulk-delete"
test_file = open("test.txt", "r")
headers = {
"Accept": "application/json",
"Content-Type": "text/plain",
"X-Auth-Token": token,
}
response = requests.delete(
url, headers=headers, verify=False, files={"form_field_name": test_file}
)
if response.status_code == 200:
log.info("Bulk delete succeeded")
else:
raise TestExecError(
"Bulk delete failed with status code: %d" % response.status_code
)
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
io_info_initialize.initialize(basic_io_structure.initial())
write_user_info = AddUserInfo()
test_info = AddTestInfo('create m buckets')
conf_path = '/etc/ceph/%s.conf' % config.cluster_name
ceph_conf = CephConfOp(conf_path)
rgw_service = RGWService()
try:
test_info.started_info()
# get user
with open('user_details') as fout:
all_users_info = simplejson.load(fout)
for each_user in all_users_info:
user_info = basic_io_structure.user(
**{
'user_id': each_user['user_id'],
'access_key': each_user['access_key'],
'secret_key': each_user['secret_key']
})
write_user_info.add_user_info(user_info)
for each_user in all_users_info:
# authenticate
auth = Auth(each_user)
rgw_conn = auth.do_auth()
# enabling sharding
if config.test_ops['sharding']['enable'] is True:
log.info('enabling sharding on buckets')
max_shards = config.test_ops['sharding']['max_shards']
log.info('making changes to ceph.conf')
ceph_conf.set_to_ceph_conf(
'global', ConfigOpts.rgw_override_bucket_index_max_shards,
max_shards)
log.info('trying to restart services ')
srv_restarted = rgw_service.restart()
time.sleep(10)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
# create buckets
if config.test_ops['create_bucket'] is True:
log.info('no of buckets to create: %s' % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user['user_id'], rand_no=bc)
log.info('creating bucket with name: %s' %
bucket_name_to_create)
# bucket = s3_ops.resource_op(rgw_conn, 'Bucket', bucket_name_to_create)
bucket = s3lib.resource_op({
'obj': rgw_conn,
'resource': 'Bucket',
'args': [bucket_name_to_create]
})
created = s3lib.resource_op({
'obj': bucket,
'resource': 'create',
'args': None,
'extra_info': {
'access_key': each_user['access_key']
}
})
if created is False:
raise TestExecError(
"Resource execution failed: bucket creation failed"
)
if created is not None:
response = HttpResponseParser(created)
if response.status_code == 200:
log.info('bucket created')
else:
raise TestExecError("bucket creation failed")
else:
raise TestExecError("bucket creation failed")
if config.test_ops['sharding']['enable'] is True:
cmd = 'radosgw-admin metadata get bucket:%s --cluster %s | grep bucket_id' \
% (bucket.name, config.cluster_name)
out = utils.exec_shell_cmd(cmd)
b_id = out.replace(
'"',
'').strip().split(":")[1].strip().replace(',', '')
cmd2 = 'rados -p default.rgw.buckets.index ls --cluster %s | grep %s' \
% (config.cluster_name, b_id)
out = utils.exec_shell_cmd(cmd2)
log.info(
'got output from sharing verification.--------')
test_info.success_status('test passed')
sys.exit(0)
except Exception as e:
log.info(e)
log.info(traceback.format_exc())
test_info.failed_status('test failed')
sys.exit(1)
except TestExecError as e:
log.info(e)
log.info(traceback.format_exc())
test_info.failed_status('test failed')
sys.exit(1)
def test_exec(config):
io_info_initialize = IOInfoInitialize()
basic_io_structure = BasicIOInfoStructure()
write_bucket_io_info = BucketIoInfo()
io_info_initialize.initialize(basic_io_structure.initial())
ceph_conf = CephConfOp()
rgw_service = RGWService()
# create user
all_users_info = s3lib.create_users(config.user_count)
if config.test_ops.get('encryption_algorithm', None) is not None:
log.info('encryption enabled, making ceph config changes')
ceph_conf.set_to_ceph_conf('global', ConfigOpts.rgw_crypt_require_ssl,
"false")
srv_restarted = rgw_service.restart()
time.sleep(30)
if srv_restarted is False:
raise TestExecError("RGW service restart failed")
else:
log.info('RGW service restarted')
for each_user in all_users_info:
# authenticate
auth = Auth(each_user, ssl=config.ssl)
if config.use_aws4 is True:
rgw_conn = auth.do_auth(**{'signature_version': 's3v4'})
else:
rgw_conn = auth.do_auth()
objects_created_list = []
if config.test_ops['create_bucket'] is True:
log.info('no of buckets to create: %s' % config.bucket_count)
for bc in range(config.bucket_count):
bucket_name_to_create = utils.gen_bucket_name_from_userid(
each_user['user_id'], rand_no=bc)
log.info('creating bucket with name: %s' %
bucket_name_to_create)
bucket = reusable.create_bucket(bucket_name_to_create,
rgw_conn, each_user)
if config.test_ops.get('enable_version', False):
log.info('enable bucket version')
reusable.enable_versioning(bucket, rgw_conn, each_user,
write_bucket_io_info)
if config.test_ops['create_object'] is True:
if config.test_ops['object_structure'] == 'flat':
# uploading data
log.info('top level s3 objects to create: %s' %
config.objects_count)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_object_name(
bucket_name_to_create, oc)
log.info('s3 object name: %s' % s3_object_name)
s3_object_path = os.path.join(
TEST_DATA_PATH, s3_object_name)
log.info('s3 object path: %s' % s3_object_path)
if config.test_ops.get(
'upload_type') == 'multipart':
log.info('upload type: multipart')
reusable.upload_mutipart_object(
s3_object_name, bucket, TEST_DATA_PATH,
config, each_user)
else:
log.info('upload type: normal')
reusable.upload_object(s3_object_name, bucket,
TEST_DATA_PATH, config,
each_user)
objects_created_list.append(
(s3_object_name, s3_object_path))
#deleting the local file created after upload
if config.local_file_delete is True:
log.info(
'deleting local file created after the upload'
)
utils.exec_shell_cmd('rm -rf %s' %
s3_object_path)
#this covers listing of a bucket with pseudo directories and objects in it ; Unable to list contents of large buckets https://bugzilla.redhat.com/show_bug.cgi?id=1874645#c72
if config.test_ops['object_structure'] == 'pseudo':
log.info(
f'pseudo directories to create {config.pseudo_dir_count} with {config.objects_count} objects in each'
)
for count in range(config.pseudo_dir_count):
s3_pseudo_dir_name = utils.gen_s3_object_name(
bucket_name_to_create, count)
s3_object_path = os.path.join(
TEST_DATA_PATH, s3_pseudo_dir_name)
manage_data.pseudo_dir_generator(s3_object_path)
for oc, size in list(config.mapped_sizes.items()):
config.obj_size = size
s3_object_name = utils.gen_s3_pseudo_object_name(
s3_pseudo_dir_name, oc)
log.info('s3 object name: %s' % s3_object_name)
s3_object_path = os.path.join(
TEST_DATA_PATH, s3_object_name)
log.info('s3 object path: %s' % s3_object_path)
if config.test_ops.get(
'upload_type') == 'multipart':
log.info('upload type: multipart')
reusable.upload_mutipart_object(
s3_object_name, bucket, TEST_DATA_PATH,
config, each_user)
else:
log.info('upload type: normal')
reusable.upload_object(
s3_object_name, bucket, TEST_DATA_PATH,
config, each_user)
#deleting the local file created after upload
if config.local_file_delete is True:
log.info(
'deleting local file created after the upload'
)
utils.exec_shell_cmd('rm -rf %s' %
s3_object_path)
# listing bucket with only pseudo directories ; Bug allows ordered bucket listing to get stuck -- 4.1 https://bugzilla.redhat.com/show_bug.cgi?id=1853052#c0
if config.test_ops['create_object'] is False:
if config.test_ops[
'object_structure'] == 'pseudo-dir-only':
log.info(
f'pseudo directories to create {config.pseudo_dir_count}'
)
for count in range(config.pseudo_dir_count):
s3_pseudo_dir_name = utils.gen_s3_object_name(
bucket_name_to_create, count)
utils.create_psuedo_dir(s3_pseudo_dir_name, bucket)
# radoslist listing of the bucket
if config.test_ops['radoslist'] is True:
log.info(
'executing the command radosgw-admin bucket radoslist '
)
radoslist = utils.exec_shell_cmd(
"radosgw-admin bucket radoslist --bucket %s" %
bucket_name_to_create)
if radoslist is False:
raise TestExecError(
"Radoslist command execution failed")
# get the configuration parameter
cmd = 'ceph daemon `ls -t /var/run/ceph/ceph-client.rgw.*.asok|head -1` config show |grep rgw_bucket_index_max_aio'
max_aio_output = utils.exec_shell_cmd(cmd)
max_aio = max_aio_output.split()[1]
# bucket stats to get the num_objects of the bucket
bucket_stats = utils.exec_shell_cmd(
"radosgw-admin bucket stats --bucket %s" %
bucket_name_to_create)
bucket_stats_json = json.loads(bucket_stats)
bkt_num_objects = bucket_stats_json['usage']['rgw.main'][
'num_objects']
# ordered listing via radosgw-admin command and noting time taken
log.info(
'measure the execution time taken to list via radosgw-admin command'
)
if config.test_ops['radosgw_listing_ordered'] is True:
log.info('ordered listing via radosgw-admin command')
rgw_cmd_time = reusable.time_to_list_via_radosgw(
bucket_name_to_create, 'ordered')
if rgw_cmd_time > 0:
rgw_cmd_time_secs = "{:.4f}".format(rgw_cmd_time)
rgw_cmd_time_mins = "{:.4f}".format(rgw_cmd_time / 60)
log.info(
f'with rgw_bucket_index_max_aio = {max_aio} time taken for ordered listing of {bkt_num_objects} objects is : {rgw_cmd_time_secs} secs ; {rgw_cmd_time_mins} mins'
)
else:
raise TestExecError(
"object listing via radosgw-admin command failed")
# unordered listing via radosgw-admin command and noting time taken
if config.test_ops['radosgw_listing_ordered'] is False:
log.info('unordered listing via radosgw-admin command')
rgw_time = reusable.time_to_list_via_radosgw(
bucket_name_to_create, 'unordered')
if rgw_time > 0:
rgw_time_secs = "{:.4f}".format(rgw_time)
rgw_time_mins = "{:.4f}".format(rgw_time / 60)
log.info(
f'with rgw_bucket_index_max_aio = {max_aio} time taken for unordered listing of {bkt_num_objects} objects is : {rgw_time_secs} secs ; {rgw_time_mins} mins'
)
else:
raise TestExecError(
"object listing via radosgw-admin command failed")
# listing via boto and noting the time taken
log.info('measure the execution time taken to list via boto')
boto_time = reusable.time_to_list_via_boto(
bucket_name_to_create, rgw_conn)
if boto_time > 0:
boto_time_secs = "{:.4f}".format(boto_time)
boto_time_mins = "{:.4f}".format(boto_time / 60)
log.info(
f'with rgw_bucket_index_max_aio = {max_aio} time taken to list {bkt_num_objects} objects via boto : {boto_time_secs} secs ; {boto_time_mins} mins'
)
else:
raise TestExecError("object listing via boto failed")
if config.test_ops.get('delete_bucket_object', False):
if config.test_ops.get('enable_version', False):
for name, path in objects_created_list:
reusable.delete_version_object(bucket, name, path,
rgw_conn, each_user)
else:
reusable.delete_objects(bucket)
time.sleep(30)
reusable.delete_bucket(bucket)
# check for any crashes during the execution
crash_info = reusable.check_for_crash()
if crash_info:
raise TestExecError("ceph daemon crash found!")
if config.user_remove is True:
reusable.remove_user(each_user)
