def secret_validate(test, secret_volume, file=None, **virsh_dargs):
"""
Test for schema secret
"""
# Clean up dirty secrets in test environments if there are.
utils_secret.clean_up_secrets()
sec_params = {
"sec_usage": "volume",
"sec_volume": secret_volume,
"sec_desc": "Test for schema secret."
}
sec_uuid = libvirt.create_secret(sec_params)
if sec_uuid:
try:
virsh.secret_dumpxml(sec_uuid, to_file=file, **virsh_dargs)
except process.CmdError as e:
test.error(str(e))
def run(test, params, env):
"""
Test the pull-mode backup function
Steps:
1. create a vm with extra disk vdb
2. create some data on vdb
3. start a pull mode full backup on vdb
4. monitor block-threshold event on scratch file/dev
5. create some data on vdb's same position as step 2 to trigger event
6. check the block-threshold event captured
"""
# Basic case config
hotplug_disk = "yes" == params.get("hotplug_disk", "no")
original_disk_size = params.get("original_disk_size", "100M")
original_disk_type = params.get("original_disk_type", "local")
original_disk_target = params.get("original_disk_target", "vdb")
event_type = params.get("event_type")
usage_threshold = params.get("usage_threshold", "100")
tmp_dir = data_dir.get_tmp_dir()
local_hostname = params.get("loal_hostname", "localhost")
# Backup config
scratch_type = params.get("scratch_type", "file")
reuse_scratch_file = "yes" == params.get("reuse_scratch_file")
scratch_blkdev_size = params.get("scratch_blkdev_size", original_disk_size)
# NBD service config
nbd_protocol = params.get("nbd_protocol", "unix")
nbd_socket = params.get("nbd_socket", "/tmp/pull_backup.socket")
nbd_tcp_port = params.get("nbd_tcp_port", "10809")
nbd_hostname = local_hostname
# LUKS config
scratch_luks_encrypted = "yes" == params.get("scratch_luks_encrypted")
luks_passphrase = params.get("luks_passphrase", "password")
# Open a new virsh session for event monitor
virsh_session = aexpect.ShellSession(virsh.VIRSH_EXEC, auto_close=True)
# Cancel the test if libvirt support related functions
if not libvirt_version.version_compare(7, 0, 0):
test.cancel("Current libvirt version doesn't support "
"event monitor for incremental backup.")
def get_backup_disk_index(vm_name, disk_name):
"""
Get the index of the backup disk to be monitored by the virsh event
:param vm_name: vm name
:param disk_name: virtual disk name, such as 'vdb'
:return: the index of the virtual disk in backup xml
"""
backup_xml = virsh.backup_dumpxml(vm_name).stdout.strip()
logging.debug("%s's current backup xml is: %s" % (vm_name, backup_xml))
backup_xml_dom = xml_utils.XMLTreeFile(backup_xml)
index_xpath = "/disks/disk"
for disk_element in backup_xml_dom.findall(index_xpath):
if disk_element.get("name") == disk_name:
return disk_element.get("index")
def is_event_captured(virsh_session, re_pattern):
"""
Check if event captured
:param virsh_session: the virsh session of the event monitor
:param re_pattern: the re pattern used to represent the event
:return: True means event captured, False means not
"""
ret_output = virsh_session.get_stripped_output()
if (not re.search(re_pattern, ret_output, re.IGNORECASE)):
return False
logging.debug("event monitor output: %s", ret_output)
return True
try:
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Make sure thedisk_element.getre is no checkpoint metadata before test
utils_backup.clean_checkpoints(vm_name)
# Backup vm xml
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
vmxml_backup = vmxml.copy()
utils_backup.enable_inc_backup_for_vm(vm)
# Prepare libvirt secret
if scratch_luks_encrypted:
utils_secret.clean_up_secrets()
luks_secret_uuid = libvirt.create_secret(params)
virsh.secret_set_value(luks_secret_uuid,
luks_passphrase,
encode=True,
debug=True)
# Prepare the disk to be backuped.
disk_params = {}
disk_path = ""
image_name = "{}_image.qcow2".format(original_disk_target)
disk_path = os.path.join(tmp_dir, image_name)
libvirt.create_local_disk("file", disk_path, original_disk_size,
"qcow2")
disk_params = {
"device_type": "disk",
"type_name": "file",
"driver_type": "qcow2",
"target_dev": original_disk_target,
"source_file": disk_path
}
disk_params["target_dev"] = original_disk_target
disk_xml = libvirt.create_disk_xml(disk_params)
virsh.attach_device(vm.name, disk_xml, flagstr="--config", debug=True)
vm.start()
session = vm.wait_for_login()
new_disks_in_vm = list(utils_disk.get_linux_disks(session).keys())
session.close()
if len(new_disks_in_vm) != 1:
test.fail("Test disk not prepared in vm")
# Use the newly added disk as the test disk
test_disk_in_vm = "/dev/" + new_disks_in_vm[0]
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
vm_disks = list(vmxml.get_disk_all().keys())
checkpoint_list = []
backup_file_list = []
# Prepare backup xml
backup_params = {"backup_mode": "pull"}
# Set libvirt default nbd export name and bitmap name
nbd_export_name = original_disk_target
nbd_bitmap_name = "backup-" + original_disk_target
backup_server_dict = {}
if nbd_protocol == "unix":
backup_server_dict["transport"] = "unix"
backup_server_dict["socket"] = nbd_socket
else:
backup_server_dict["name"] = nbd_hostname
backup_server_dict["port"] = nbd_tcp_port
backup_params["backup_server"] = backup_server_dict
backup_disk_xmls = []
for vm_disk in vm_disks:
backup_disk_params = {"disk_name": vm_disk}
if vm_disk != original_disk_target:
backup_disk_params["enable_backup"] = "no"
else:
backup_disk_params["enable_backup"] = "yes"
backup_disk_params["disk_type"] = scratch_type
# Prepare nbd scratch file/dev params
scratch_params = {"attrs": {}}
scratch_path = None
if scratch_type == "file":
scratch_file_name = "scratch_file"
scratch_path = os.path.join(tmp_dir, scratch_file_name)
if reuse_scratch_file:
libvirt.create_local_disk("file", scratch_path,
original_disk_size, "qcow2")
scratch_params["attrs"]["file"] = scratch_path
elif scratch_type == "block":
scratch_path = libvirt.setup_or_cleanup_iscsi(
is_setup=True, image_size=scratch_blkdev_size)
scratch_params["attrs"]["dev"] = scratch_path
else:
test.fail("We do not support backup scratch type: '%s'" %
scratch_type)
if scratch_luks_encrypted:
encryption_dict = {
"encryption": "luks",
"secret": {
"type": "passphrase",
"uuid": luks_secret_uuid
}
}
scratch_params["encryption"] = encryption_dict
logging.debug("scratch params: %s", scratch_params)
backup_disk_params["backup_scratch"] = scratch_params
backup_disk_xml = utils_backup.create_backup_disk_xml(
backup_disk_params)
backup_disk_xmls.append(backup_disk_xml)
logging.debug("disk list %s", backup_disk_xmls)
backup_xml = utils_backup.create_backup_xml(backup_params,
backup_disk_xmls)
logging.debug("Backup Xml: %s", backup_xml)
# Prepare checkpoint xml
checkpoint_name = "checkpoint"
checkpoint_list.append(checkpoint_name)
cp_params = {"checkpoint_name": checkpoint_name}
cp_params["checkpoint_desc"] = params.get("checkpoint_desc",
"desc of cp")
disk_param_list = []
for vm_disk in vm_disks:
cp_disk_param = {"name": vm_disk}
if vm_disk != original_disk_target:
cp_disk_param["checkpoint"] = "no"
else:
cp_disk_param["checkpoint"] = "bitmap"
cp_disk_bitmap = params.get("cp_disk_bitmap")
if cp_disk_bitmap:
cp_disk_param["bitmap"] = cp_disk_bitmap
disk_param_list.append(cp_disk_param)
checkpoint_xml = utils_backup.create_checkpoint_xml(
cp_params, disk_param_list)
logging.debug("Checkpoint Xml: %s", checkpoint_xml)
# Generate some random data in vm's test disk
def dd_data_to_testdisk():
"""
Generate some data to vm's test disk
"""
dd_count = "1"
dd_seek = "10"
dd_bs = "1M"
session = vm.wait_for_login()
utils_disk.dd_data_to_vm_disk(session, test_disk_in_vm, dd_bs,
dd_seek, dd_count)
session.close()
dd_data_to_testdisk()
# Start backup
backup_options = backup_xml.xml + " " + checkpoint_xml.xml
if reuse_scratch_file:
backup_options += " --reuse-external"
backup_result = virsh.backup_begin(vm_name, backup_options, debug=True)
# Start to monitor block-threshold of backup disk's scratch file/dev
backup_disk_index = get_backup_disk_index(vm_name,
original_disk_target)
if not backup_disk_index:
test.fail("Backup xml has no index for disks.")
backup_disk_obj = original_disk_target + "[%s]" % backup_disk_index
virsh.domblkthreshold(
vm_name, original_disk_target + "[%s]" % backup_disk_index,
usage_threshold)
event_cmd = "event %s %s --loop" % (vm_name, event_type)
virsh_session.sendline(event_cmd)
# Generate some random data to same position of vm's test disk
dd_data_to_testdisk()
# Check if the block-threshold event captured by monitor
if event_type == "block-threshold":
event_pattern = (".*block-threshold.*%s.*%s\[%s\].* %s .*" %
(vm_name, original_disk_target, backup_disk_index,
usage_threshold))
if not utils_misc.wait_for(
lambda: is_event_captured(virsh_session, event_pattern), 10):
test.fail("Event not captured by event monitor")
# Abort backup job
virsh.domjobabort(vm_name, debug=True)
finally:
# Remove checkpoints
if "checkpoint_list" in locals() and checkpoint_list:
for checkpoint_name in checkpoint_list:
virsh.checkpoint_delete(vm_name, checkpoint_name)
if vm.is_alive():
vm.destroy(gracefully=False)
# Restoring vm
vmxml_backup.sync()
# Remove libvirt secret
if "luks_secret_uuid" in locals():
virsh.secret_undefine(luks_secret_uuid, ignore_status=True)
# Remove iscsi devices
if scratch_type == "block":
libvirt.setup_or_cleanup_iscsi(False)
# Remove scratch file
if "scratch_path" in locals():
if scratch_type == "file" and os.path.exists(scratch_path):
os.remove(scratch_path)
def run(test, params, env):
"""
Test the pull-mode backup function
Steps:
1. craete a vm with extra disk vdb
2. create some data on vdb
3. start a pull mode full backup on vdb
4. create some data on vdb
5. start a pull mode incremental backup
6. repeat step 5 to 7
7. check the full/incremental backup file data
"""
# Basic case config
hotplug_disk = "yes" == params.get("hotplug_disk", "no")
original_disk_size = params.get("original_disk_size", "100M")
original_disk_type = params.get("original_disk_type", "local")
original_disk_target = params.get("original_disk_target", "vdb")
local_hostname = params.get("loal_hostname", "localhost")
local_ip = params.get("local_ip", "127.0.0.1")
local_user_name = params.get("local_user_name", "root")
local_user_password = params.get("local_user_password", "redhat")
tmp_dir = data_dir.get_tmp_dir()
# Backup config
scratch_type = params.get("scratch_type", "file")
reuse_scratch_file = "yes" == params.get("reuse_scratch_file")
prepare_scratch_file = "yes" == params.get("prepare_scratch_file")
scratch_blkdev_path = params.get("scratch_blkdev_path")
scratch_blkdev_size = params.get("scratch_blkdev_size", original_disk_size)
prepare_scratch_blkdev = "yes" == params.get("prepare_scratch_blkdev")
backup_rounds = int(params.get("backup_rounds", 3))
backup_error = "yes" == params.get("backup_error")
expect_backup_canceled = "yes" == params.get("expect_backup_canceled")
# NBD service config
nbd_protocol = params.get("nbd_protocol", "unix")
nbd_socket = params.get("nbd_socket", "/tmp/pull_backup.socket")
nbd_tcp_port = params.get("nbd_tcp_port", "10809")
nbd_hostname = local_hostname
set_exportname = "yes" == params.get("set_exportname")
set_exportbitmap = "yes" == params.get("set_exportbitmap")
# TLS service config
tls_enabled = "yes" == params.get("tls_enabled")
tls_x509_verify = "yes" == params.get("tls_x509_verify")
custom_pki_path = "yes" == params.get("custom_pki_path")
tls_client_ip = tls_server_ip = local_ip
tls_client_cn = tls_server_cn = local_hostname
tls_client_user = tls_server_user = local_user_name
tls_client_pwd = tls_server_pwd = local_user_password
tls_provide_client_cert = "yes" == params.get("tls_provide_client_cert")
tls_error = "yes" == params.get("tls_error")
# LUKS config
scratch_luks_encrypted = "yes" == params.get("scratch_luks_encrypted")
luks_passphrase = params.get("luks_passphrase", "password")
# Cancel the test if libvirt support related functions
if not libvirt_version.version_compare(6, 0, 0):
test.cancel("Current libvirt version doesn't support "
"incremental backup.")
if tls_enabled and not libvirt_version.version_compare(6, 6, 0):
test.cancel("Current libvirt version doesn't support pull mode "
"backup with tls nbd.")
try:
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Make sure there is no checkpoint metadata before test
utils_backup.clean_checkpoints(vm_name)
# Backup vm xml
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
vmxml_backup = vmxml.copy()
utils_backup.enable_inc_backup_for_vm(vm)
# Prepare tls env
if tls_enabled:
# Prepare pki
tls_config = {
"qemu_tls": "yes",
"auto_recover": "yes",
"client_ip": tls_client_ip,
"server_ip": tls_server_ip,
"client_cn": tls_client_cn,
"server_cn": tls_server_cn,
"client_user": tls_client_user,
"server_user": tls_server_user,
"client_pwd": tls_client_pwd,
"server_pwd": tls_server_pwd,
}
if custom_pki_path:
pki_path = os.path.join(tmp_dir, "inc_bkup_pki")
else:
pki_path = "/etc/pki/libvirt-backup/"
if tls_x509_verify:
tls_config["client_ip"] = tls_client_ip
tls_config["custom_pki_path"] = pki_path
tls_obj = TLSConnection(tls_config)
tls_obj.conn_setup(True, tls_provide_client_cert)
logging.debug("TLS certs in: %s" % pki_path)
# Set qemu.conf
qemu_config = LibvirtQemuConfig()
if tls_x509_verify:
qemu_config.backup_tls_x509_verify = True
else:
qemu_config.backup_tls_x509_verify = False
if custom_pki_path:
qemu_config.backup_tls_x509_cert_dir = pki_path
utils_libvirtd.Libvirtd().restart()
# Prepare libvirt secret
if scratch_luks_encrypted:
utils_secret.clean_up_secrets()
luks_secret_uuid = libvirt.create_secret(params)
virsh.secret_set_value(luks_secret_uuid,
luks_passphrase,
encode=True,
debug=True)
# Prepare the disk to be backuped.
disk_params = {}
disk_path = ""
if original_disk_type == "local":
image_name = "{}_image.qcow2".format(original_disk_target)
disk_path = os.path.join(tmp_dir, image_name)
libvirt.create_local_disk("file", disk_path, original_disk_size,
"qcow2")
disk_params = {
"device_type": "disk",
"type_name": "file",
"driver_type": "qcow2",
"target_dev": original_disk_target,
"source_file": disk_path
}
if original_disk_target:
disk_params["target_dev"] = original_disk_target
elif original_disk_type == "iscsi":
iscsi_host = '127.0.0.1'
iscsi_target, lun_num = libvirt.setup_or_cleanup_iscsi(
is_setup=True,
is_login=False,
image_size=original_disk_size,
portal_ip=iscsi_host)
disk_path = ("iscsi://[%s]/%s/%s" %
(iscsi_host, iscsi_target, lun_num))
process.run("qemu-img create -f qcow2 %s %s" %
(disk_path, original_disk_size),
shell=True,
verbose=True)
disk_params = {
'device_type': 'disk',
'type_name': 'network',
"driver_type": "qcow2",
'target_dev': original_disk_target
}
disk_params_src = {
'source_protocol': 'iscsi',
'source_name': iscsi_target + "/%s" % lun_num,
'source_host_name': iscsi_host,
'source_host_port': '3260'
}
disk_params.update(disk_params_src)
elif original_disk_type == "gluster":
gluster_vol_name = "gluster_vol"
gluster_pool_name = "gluster_pool"
gluster_img_name = "gluster.qcow2"
gluster_host_ip = gluster.setup_or_cleanup_gluster(
is_setup=True,
vol_name=gluster_vol_name,
pool_name=gluster_pool_name,
**params)
disk_path = 'gluster://%s/%s/%s' % (
gluster_host_ip, gluster_vol_name, gluster_img_name)
process.run("qemu-img create -f qcow2 %s %s" %
(disk_path, original_disk_size),
shell=True,
verbose=True)
disk_params = {
'device_type': 'disk',
'type_name': 'network',
"driver_type": "qcow2",
'target_dev': original_disk_target
}
disk_params_src = {
'source_protocol': 'gluster',
'source_name': gluster_vol_name + "/%s" % gluster_img_name,
'source_host_name': gluster_host_ip,
'source_host_port': '24007'
}
disk_params.update(disk_params_src)
else:
test.error("The disk type '%s' not supported in this script.",
original_disk_type)
if hotplug_disk:
vm.start()
session = vm.wait_for_login().close()
disk_xml = libvirt.create_disk_xml(disk_params)
virsh.attach_device(vm_name, disk_xml, debug=True)
else:
disk_xml = libvirt.create_disk_xml(disk_params)
virsh.attach_device(vm.name,
disk_xml,
flagstr="--config",
debug=True)
vm.start()
session = vm.wait_for_login()
new_disks_in_vm = list(utils_disk.get_linux_disks(session).keys())
session.close()
if len(new_disks_in_vm) != 1:
test.fail("Test disk not prepared in vm")
# Use the newly added disk as the test disk
test_disk_in_vm = "/dev/" + new_disks_in_vm[0]
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
vm_disks = list(vmxml.get_disk_all().keys())
checkpoint_list = []
is_incremental = False
backup_file_list = []
for backup_index in range(backup_rounds):
# Prepare backup xml
backup_params = {"backup_mode": "pull"}
if backup_index > 0:
is_incremental = True
backup_params["backup_incremental"] = "checkpoint_" + str(
backup_index - 1)
# Set libvirt default nbd export name and bitmap name
nbd_export_name = original_disk_target
nbd_bitmap_name = "backup-" + original_disk_target
backup_server_dict = {}
if nbd_protocol == "unix":
backup_server_dict["transport"] = "unix"
backup_server_dict["socket"] = nbd_socket
else:
backup_server_dict["name"] = nbd_hostname
backup_server_dict["port"] = nbd_tcp_port
if tls_enabled:
backup_server_dict["tls"] = "yes"
backup_params["backup_server"] = backup_server_dict
backup_disk_xmls = []
for vm_disk in vm_disks:
backup_disk_params = {"disk_name": vm_disk}
if vm_disk != original_disk_target:
backup_disk_params["enable_backup"] = "no"
else:
backup_disk_params["enable_backup"] = "yes"
backup_disk_params["disk_type"] = scratch_type
# Custom nbd export name and bitmap name if required
if set_exportname:
nbd_export_name = original_disk_target + "_custom_exp"
backup_disk_params["exportname"] = nbd_export_name
if set_exportbitmap:
nbd_bitmap_name = original_disk_target + "_custom_bitmap"
backup_disk_params["exportbitmap"] = nbd_bitmap_name
# Prepare nbd scratch file/dev params
scratch_params = {"attrs": {}}
scratch_path = None
if scratch_type == "file":
scratch_file_name = "scratch_file_%s" % backup_index
scratch_path = os.path.join(tmp_dir, scratch_file_name)
if prepare_scratch_file:
libvirt.create_local_disk("file", scratch_path,
original_disk_size,
"qcow2")
scratch_params["attrs"]["file"] = scratch_path
elif scratch_type == "block":
if prepare_scratch_blkdev:
scratch_path = libvirt.setup_or_cleanup_iscsi(
is_setup=True, image_size=scratch_blkdev_size)
scratch_params["attrs"]["dev"] = scratch_path
else:
test.fail(
"We do not support backup scratch type: '%s'" %
scratch_type)
if scratch_luks_encrypted:
encryption_dict = {
"encryption": "luks",
"secret": {
"type": "passphrase",
"uuid": luks_secret_uuid
}
}
scratch_params["encryption"] = encryption_dict
logging.debug("scratch params: %s", scratch_params)
backup_disk_params["backup_scratch"] = scratch_params
backup_disk_xml = utils_backup.create_backup_disk_xml(
backup_disk_params)
backup_disk_xmls.append(backup_disk_xml)
logging.debug("disk list %s", backup_disk_xmls)
backup_xml = utils_backup.create_backup_xml(
backup_params, backup_disk_xmls)
logging.debug("ROUND_%s Backup Xml: %s", backup_index, backup_xml)
# Prepare checkpoint xml
checkpoint_name = "checkpoint_%s" % backup_index
checkpoint_list.append(checkpoint_name)
cp_params = {"checkpoint_name": checkpoint_name}
cp_params["checkpoint_desc"] = params.get(
"checkpoint_desc", "desc of cp_%s" % backup_index)
disk_param_list = []
for vm_disk in vm_disks:
cp_disk_param = {"name": vm_disk}
if vm_disk != original_disk_target:
cp_disk_param["checkpoint"] = "no"
else:
cp_disk_param["checkpoint"] = "bitmap"
cp_disk_bitmap = params.get("cp_disk_bitmap")
if cp_disk_bitmap:
cp_disk_param["bitmap"] = cp_disk_bitmap + str(
backup_index)
disk_param_list.append(cp_disk_param)
checkpoint_xml = utils_backup.create_checkpoint_xml(
cp_params, disk_param_list)
logging.debug("ROUND_%s Checkpoint Xml: %s", backup_index,
checkpoint_xml)
# Create some data in vdb
dd_count = "1"
dd_seek = str(backup_index * 10 + 10)
dd_bs = "1M"
session = vm.wait_for_login()
utils_disk.dd_data_to_vm_disk(session, test_disk_in_vm, dd_bs,
dd_seek, dd_count)
session.close()
# Start backup
backup_options = backup_xml.xml + " " + checkpoint_xml.xml
if reuse_scratch_file:
backup_options += " --reuse-external"
backup_result = virsh.backup_begin(vm_name,
backup_options,
ignore_status=True,
debug=True)
if backup_result.exit_status:
raise utils_backup.BackupBeginError(
backup_result.stderr.strip())
# If required, do some error operations during backup job
error_operation = params.get("error_operation")
if error_operation:
if "destroy_vm" in error_operation:
vm.destroy(gracefully=False)
if "kill_qemu" in error_operation:
utils_misc.safe_kill(vm.get_pid(), signal.SIGKILL)
if utils_misc.wait_for(
lambda: utils_backup.is_backup_canceled(vm_name),
timeout=5):
raise utils_backup.BackupCanceledError()
elif expect_backup_canceled:
test.fail("Backup job should be canceled but not.")
backup_file_path = os.path.join(
tmp_dir, "backup_file_%s.qcow2" % str(backup_index))
backup_file_list.append(backup_file_path)
nbd_params = {
"nbd_protocol": nbd_protocol,
"nbd_export": nbd_export_name
}
if nbd_protocol == "unix":
nbd_params["nbd_socket"] = nbd_socket
elif nbd_protocol == "tcp":
nbd_params["nbd_hostname"] = nbd_hostname
nbd_params["nbd_tcp_port"] = nbd_tcp_port
if tls_enabled:
nbd_params["tls_dir"] = pki_path
nbd_params["tls_server_ip"] = tls_server_ip
if not is_incremental:
# Do full backup
try:
utils_backup.pull_full_backup_to_file(
nbd_params, backup_file_path)
except Exception as details:
if tls_enabled and tls_error:
raise utils_backup.BackupTLSError(details)
else:
test.fail("Fail to get full backup data: %s" % details)
logging.debug("Full backup to: %s", backup_file_path)
else:
# Do incremental backup
utils_backup.pull_incremental_backup_to_file(
nbd_params, backup_file_path, nbd_bitmap_name,
original_disk_size)
# Check if scratch file encrypted
if scratch_luks_encrypted and scratch_path:
cmd = "qemu-img info -U %s" % scratch_path
result = process.run(cmd, shell=True,
verbose=True).stdout_text.strip()
if (not re.search("format.*luks", result, re.IGNORECASE)
or not re.search("encrypted.*yes", result,
re.IGNORECASE)):
test.fail("scratch file/dev is not encrypted by LUKS")
virsh.domjobabort(vm_name, debug=True)
for checkpoint_name in checkpoint_list:
virsh.checkpoint_delete(vm_name, checkpoint_name, debug=True)
if vm.is_alive():
vm.destroy(gracefully=False)
# Compare the backup data and original data
original_data_file = os.path.join(tmp_dir, "original_data.qcow2")
cmd = "qemu-img convert -f qcow2 %s -O qcow2 %s" % (disk_path,
original_data_file)
process.run(cmd, shell=True, verbose=True)
for backup_file in backup_file_list:
if not utils_backup.cmp_backup_data(original_data_file,
backup_file):
test.fail("Backup and original data are not identical for"
"'%s' and '%s'" % (disk_path, backup_file))
else:
logging.debug("'%s' contains correct backup data", backup_file)
except utils_backup.BackupBeginError as detail:
if backup_error:
logging.debug("Backup failed as expected.")
else:
test.fail("Backup failed to start: %s" % detail)
except utils_backup.BackupTLSError as detail:
if tls_error:
logging.debug("Failed to get backup data as expected.")
else:
test.fail("Failed to get tls backup data: %s" % detail)
except utils_backup.BackupCanceledError as detail:
if expect_backup_canceled:
logging.debug("Backup canceled as expected.")
if not vm.is_alive():
logging.debug("Check if vm can be started again when backup "
"canceled.")
vm.start()
vm.wait_for_login().close()
else:
test.fail("Backup job canceled: %s" % detail)
finally:
# Remove checkpoints
clean_checkpoint_metadata = not vm.is_alive()
if "error_operation" in locals() and error_operation is not None:
if "kill_qemu" in error_operation:
clean_checkpoint_metadata = True
utils_backup.clean_checkpoints(
vm_name, clean_metadata=clean_checkpoint_metadata)
if vm.is_alive():
vm.destroy(gracefully=False)
# Restoring vm
vmxml_backup.sync()
# Remove iscsi devices
if original_disk_type == "iscsi" or scratch_type == "block":
libvirt.setup_or_cleanup_iscsi(False)
# Remove gluster devices
if original_disk_type == "gluster":
gluster.setup_or_cleanup_gluster(is_setup=False,
vol_name=gluster_vol_name,
pool_name=gluster_pool_name,
**params)
# Recover qemu.conf
if "qemu_config" in locals():
qemu_config.restore()
# Remove tls object
if "tls_obj" in locals():
del tls_obj
# Remove libvirt secret
if "luks_secret_uuid" in locals():
virsh.secret_undefine(luks_secret_uuid, ignore_status=True)
def run(test, params, env):
"""
Test nbd disk option.
1.Prepare backend storage
2.Use nbd to export the backend storage with or without TLS
3.Prepare a disk xml indicating to the backend storage
4.Start VM with disk hotplug/coldplug
5.Start snapshot or save/restore operations on ndb disk
6.Check some behaviours on VM
7.Recover test environment
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': False}
def check_disk_save_restore(save_file):
"""
Check domain save and restore operation.
:param save_file: the path to saved file
"""
# Save the domain.
ret = virsh.save(vm_name, save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
# Restore the domain.
ret = virsh.restore(save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
def check_snapshot():
"""
Check domain snapshot operations.
"""
# Cleaup dirty data if exists
if os.path.exists(snapshot_name1_file):
os.remove(snapshot_name1_file)
if os.path.exists(snapshot_name2_mem_file):
os.remove(snapshot_name2_mem_file)
if os.path.exists(snapshot_name2_disk_file):
os.remove(snapshot_name2_disk_file)
device_target = 'vda'
snapshot_name1_option = "--diskspec %s,file=%s,snapshot=external --disk-only --atomic" % (
device_target, snapshot_name1_file)
ret = virsh.snapshot_create_as(vm_name,
"%s %s" %
(snapshot_name1, snapshot_name1_option),
debug=True)
libvirt.check_exit_status(ret)
snap_lists = virsh.snapshot_list(vm_name, debug=True)
if snapshot_name1 not in snap_lists:
test.fail("Snapshot %s doesn't exist" % snapshot_name1)
# Check file can be created after snapshot
def _check_file_create(filename):
"""
Check whether file with specified filename exists or not.
:param filename: finename
"""
try:
session = vm.wait_for_login()
if platform.platform().count('ppc64'):
time.sleep(10)
cmd = ("echo" " teststring > /tmp/{0}".format(filename))
status, output = session.cmd_status_output(cmd)
if status != 0:
test.fail("Failed to touch one file on VM internal")
except (remote.LoginError, virt_vm.VMError,
aexpect.ShellError) as e:
logging.error(str(e))
raise
finally:
if session:
session.close()
_check_file_create("disk.txt")
# Create memory snapshot.
snapshot_name2_mem_option = "--memspec file=%s,snapshot=external" % (
snapshot_name2_mem_file)
snapshot_name2_disk_option = "--diskspec %s,file=%s,snapshot=external --atomic" % (
device_target, snapshot_name2_disk_file)
snapshot_name2_option = "%s %s" % (snapshot_name2_mem_option,
snapshot_name2_disk_option)
ret = virsh.snapshot_create_as(vm_name,
"%s %s" %
(snapshot_name2, snapshot_name2_option),
debug=True)
libvirt.check_exit_status(ret)
snap_lists = virsh.snapshot_list(vm_name, debug=True)
if snapshot_name2 not in snap_lists:
test.fail("Snapshot: %s doesn't exist" % snapshot_name2)
_check_file_create("mem.txt")
def check_in_vm(target, old_parts):
"""
Check mount/read/write disk in VM.
:param target: Disk dev in VM.
:param old_parts: Original disk partitions in VM.
:return: True if check successfully.
"""
try:
session = vm.wait_for_login()
if platform.platform().count('ppc64'):
time.sleep(10)
new_parts = utils_disk.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
else:
added_part = added_parts[0]
cmd = ("fdisk -l /dev/{0} && mkfs.ext4 -F /dev/{0} && "
"mkdir -p test && mount /dev/{0} test && echo"
" teststring > test/testfile && umount test".format(
added_part))
status, output = session.cmd_status_output(cmd)
logging.debug("Disk operation in VM:\nexit code:\n%s\noutput:\n%s",
status, output)
return status == 0
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
# Disk specific attributes.
device = params.get("virt_disk_device", "disk")
device_target = params.get("virt_disk_device_target", "vdb")
device_format = params.get("virt_disk_device_format", "raw")
device_type = params.get("virt_disk_device_type", "file")
device_bus = params.get("virt_disk_device_bus", "virtio")
backend_storage_type = params.get("backend_storage_type", "iscsi")
image_path = params.get("emulated_image")
# Get config parameters
status_error = "yes" == params.get("status_error")
define_error = "yes" == params.get("define_error")
check_partitions = "yes" == params.get("virt_disk_check_partitions", "yes")
hotplug_disk = "yes" == params.get("hotplug_disk", "no")
tls_enabled = "yes" == params.get("enable_tls", "no")
enable_private_key_encryption = "yes" == params.get(
"enable_private_key_encryption", "no")
private_key_encrypt_passphrase = params.get("private_key_password")
domain_operation = params.get("domain_operation")
secret_uuid = None
# Get snapshot attributes.
snapshot_name1 = params.get("snapshot_name1")
snapshot_name1_file = params.get("snapshot_name1_file")
snapshot_name2 = params.get("snapshot_name2")
snapshot_name2_mem_file = params.get("snapshot_name2_mem_file")
snapshot_name2_disk_file = params.get("snapshot_name2_disk_file")
# Initialize one NbdExport object
nbd = None
# Start VM and get all partitions in VM.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = utils_disk.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
try:
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
# Get server hostname.
hostname = process.run('hostname',
ignore_status=False,
shell=True,
verbose=True).stdout_text.strip()
# Setup backend storage
nbd_server_host = hostname
nbd_server_port = params.get("nbd_server_port")
image_path = params.get("emulated_image",
"/var/lib/libvirt/images/nbdtest.img")
export_name = params.get("export_name", None)
deleteExisted = "yes" == params.get("deleteExisted", "yes")
tls_bit = "no"
if tls_enabled:
tls_bit = "yes"
# Create secret
if enable_private_key_encryption:
# this feature is enabled after libvirt 6.6.0
if not libvirt_version.version_compare(6, 6, 0):
test.cancel(
"current libvirt version doesn't support client private key encryption"
)
utils_secret.clean_up_secrets()
private_key_sec_uuid = libvirt.create_secret(params)
logging.debug("A secret created with uuid = '%s'",
private_key_sec_uuid)
private_key_sec_passwd = params.get("private_key_password",
"redhat")
ret = virsh.secret_set_value(private_key_sec_uuid,
private_key_sec_passwd,
encode=True,
use_file=True,
debug=True)
libvirt.check_exit_status(ret)
secret_uuid = private_key_sec_uuid
# Initialize special test environment config for snapshot operations.
if domain_operation == "snap_shot":
first_disk = vm.get_first_disk_devices()
image_path = first_disk['source']
device_target = 'vda'
# Remove previous xml
disks = vmxml.get_devices(device_type="disk")
for disk_ in disks:
if disk_.target['dev'] == device_target:
vmxml.del_device(disk_)
break
# Create NbdExport object
nbd = NbdExport(
image_path,
image_format=device_format,
port=nbd_server_port,
export_name=export_name,
tls=tls_enabled,
deleteExisted=deleteExisted,
private_key_encrypt_passphrase=private_key_encrypt_passphrase,
secret_uuid=secret_uuid)
nbd.start_nbd_server()
# Prepare disk source xml
source_attrs_dict = {"protocol": "nbd", "tls": "%s" % tls_bit}
if export_name:
source_attrs_dict.update({"name": "%s" % export_name})
disk_src_dict = {}
disk_src_dict.update({"attrs": source_attrs_dict})
disk_src_dict.update(
{"hosts": [{
"name": nbd_server_host,
"port": nbd_server_port
}]})
# Add disk xml.
disk_xml = Disk(type_name=device_type)
disk_xml.device = device
disk_xml.target = {"dev": device_target, "bus": device_bus}
driver_dict = {"name": "qemu", "type": 'raw'}
disk_xml.driver = driver_dict
disk_source = disk_xml.new_disk_source(**disk_src_dict)
disk_xml.source = disk_source
logging.debug("new disk xml is: %s", disk_xml)
# Sync VM xml
if not hotplug_disk:
vmxml.add_device(disk_xml)
try:
vmxml.sync()
vm.start()
vm.wait_for_login()
except xcepts.LibvirtXMLError as xml_error:
if not define_error:
test.fail("Failed to define VM:\n%s" % str(xml_error))
except virt_vm.VMStartError as details:
# When use wrong password in disk xml for cold plug cases,
# VM cannot be started
if status_error and not hotplug_disk:
logging.info("VM failed to start as expected: %s" %
str(details))
else:
test.fail("VM should start but failed: %s" % str(details))
# Hotplug disk.
if hotplug_disk:
result = virsh.attach_device(vm_name,
disk_xml.xml,
ignore_status=True,
debug=True)
libvirt.check_exit_status(result, status_error)
# Check save and restore operation and its result
if domain_operation == 'save_restore':
save_file = "/tmp/%s.save" % vm_name
check_disk_save_restore(save_file)
# Check attached nbd disk
if check_partitions and not status_error:
logging.debug("wait seconds for starting in checking vm part")
time.sleep(2)
if not check_in_vm(device_target, old_parts):
test.fail("Check disk partitions in VM failed")
# Check snapshot operation and its result
if domain_operation == 'snap_shot':
check_snapshot()
# Unplug disk.
if hotplug_disk:
result = virsh.detach_device(vm_name,
disk_xml.xml,
ignore_status=True,
debug=True,
wait_for_event=True)
libvirt.check_exit_status(result, status_error)
finally:
if enable_private_key_encryption:
utils_secret.clean_up_secrets()
# Clean up backend storage and TLS
try:
if nbd:
nbd.cleanup()
# Clean up snapshots if exist
if domain_operation == 'snap_shot':
snap_lists = virsh.snapshot_list(vm_name, debug=True)
for snap_name in snap_lists:
virsh.snapshot_delete(vm_name,
snap_name,
"--metadata",
debug=True,
ignore_status=True)
# Cleaup dirty data if exists
if os.path.exists(snapshot_name1_file):
os.remove(snapshot_name1_file)
if os.path.exists(snapshot_name2_mem_file):
os.remove(snapshot_name2_mem_file)
if os.path.exists(snapshot_name2_disk_file):
os.remove(snapshot_name2_disk_file)
except Exception as ndbEx:
logging.info("Clean Up nbd failed: %s" % str(ndbEx))
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
vmxml_backup.sync("--snapshots-metadata")
def run(test, params, env):
"""
Test virsh blockcopy --xml option.
1.Prepare backend storage (file/block/iscsi/ceph/nbd)
2.Start VM
3.Prepare target xml
4.Execute virsh blockcopy --xml command
5.Check VM xml after operation accomplished
6.Clean up test environment
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
ignore_check = False
def check_blockcopy_xml(vm_name, source_image, ignore_check=False):
"""
Check blockcopy xml in VM.
:param vm_name: VM name
:param source_image: source image name.
:param ignore_check: default is False.
"""
if ignore_check:
return
source_imge_list = []
blklist = virsh.domblklist(vm_name).stdout_text.splitlines()
for line in blklist:
if line.strip().startswith(('hd', 'vd', 'sd', 'xvd')):
source_imge_list.append(line.split()[-1])
logging.debug('domblklist %s:\n%s', vm_name, source_imge_list)
if not any(source_image in s for s in source_imge_list):
test.fail("Cannot find expected source image: %s" % source_image)
# Disk specific attributes.
device = params.get("virt_disk_device", "disk")
device_target = params.get("virt_disk_device_target", "vdd")
device_format = params.get("virt_disk_device_format", "raw")
device_type = params.get("virt_disk_device_type", "file")
device_bus = params.get("virt_disk_device_bus", "virtio")
backend_storage_type = params.get("backend_storage_type", "iscsi")
blockcopy_option = params.get("blockcopy_option")
# Backend storage auth info
storage_size = params.get("storage_size", "1G")
enable_auth = "yes" == params.get("enable_auth")
use_auth_usage = "yes" == params.get("use_auth_usage")
auth_sec_usage_type = params.get("auth_sec_usage_type", "iscsi")
auth_sec_usage_target = params.get("auth_sec_usage_target", "libvirtiscsi")
auth_sec_uuid = ""
disk_auth_dict = {}
size = "1"
status_error = "yes" == params.get("status_error")
define_error = "yes" == params.get("define_error")
# Initialize one NbdExport object
nbd = None
img_file = os.path.join(data_dir.get_tmp_dir(), "%s_test.img" % vm_name)
# Start VM and get all partitions in VM.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = utils_disk.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
# Additional disk images.
disks_img = []
try:
# Clean up dirty secrets in test environments if there are.
utils_secret.clean_up_secrets()
# Setup backend storage
if backend_storage_type == "file":
image_filename = params.get("image_filename", "raw.img")
disk_path = os.path.join(data_dir.get_tmp_dir(), image_filename)
if blockcopy_option in ['reuse_external']:
device_source = libvirt.create_local_disk(
backend_storage_type, disk_path, storage_size,
device_format)
else:
device_source = disk_path
disks_img.append({
"format": device_format,
"source": disk_path,
"path": disk_path
})
disk_src_dict = {
'attrs': {
'file': device_source,
'type_name': 'file'
}
}
checkout_device_source = image_filename
elif backend_storage_type == "iscsi":
iscsi_host = params.get("iscsi_host")
iscsi_port = params.get("iscsi_port")
if device_type == "block":
device_source = libvirt.setup_or_cleanup_iscsi(is_setup=True)
disk_src_dict = {'attrs': {'dev': device_source}}
checkout_device_source = device_source
elif device_type == "network":
chap_user = params.get("chap_user", "redhat")
chap_passwd = params.get("chap_passwd", "password")
auth_sec_usage = params.get("auth_sec_usage", "libvirtiscsi")
auth_sec_dict = {
"sec_usage": "iscsi",
"sec_target": auth_sec_usage
}
auth_sec_uuid = libvirt.create_secret(auth_sec_dict)
# Set password of auth secret
virsh.secret_set_value(auth_sec_uuid,
chap_passwd,
encode=True,
debug=True)
iscsi_target, lun_num = libvirt.setup_or_cleanup_iscsi(
is_setup=True,
is_login=False,
image_size=storage_size,
chap_user=chap_user,
chap_passwd=chap_passwd,
portal_ip=iscsi_host)
# ISCSI auth attributes for disk xml
disk_auth_dict = {
"auth_user": chap_user,
"secret_type": auth_sec_usage_type,
"secret_usage": auth_sec_usage_target
}
device_source = "iscsi://%s:%s/%s/%s" % (
iscsi_host, iscsi_port, iscsi_target, lun_num)
disk_src_dict = {
"attrs": {
"protocol": "iscsi",
"name": "%s/%s" % (iscsi_target, lun_num)
},
"hosts": [{
"name": iscsi_host,
"port": iscsi_port
}]
}
checkout_device_source = 'emulated-iscsi'
elif backend_storage_type == "ceph":
ceph_host_ip = params.get("ceph_host_ip", "EXAMPLE_HOSTS")
ceph_mon_ip = params.get("ceph_mon_ip", "EXAMPLE_MON_HOST")
ceph_host_port = params.get("ceph_host_port", "EXAMPLE_PORTS")
ceph_disk_name = params.get("ceph_disk_name",
"EXAMPLE_SOURCE_NAME")
ceph_client_name = params.get("ceph_client_name")
ceph_client_key = params.get("ceph_client_key")
ceph_auth_user = params.get("ceph_auth_user")
ceph_auth_key = params.get("ceph_auth_key")
enable_auth = "yes" == params.get("enable_auth")
size = "0.15"
key_file = os.path.join(data_dir.get_tmp_dir(), "ceph.key")
key_opt = ""
# Prepare a blank params to confirm whether it needs delete the configure at the end of the test
ceph_cfg = ""
if not utils_package.package_install(["ceph-common"]):
test.error("Failed to install ceph-common")
# Create config file if it doesn't exist
ceph_cfg = ceph.create_config_file(ceph_mon_ip)
# If enable auth, prepare a local file to save key
if ceph_client_name and ceph_client_key:
with open(key_file, 'w') as f:
f.write("[%s]\n\tkey = %s\n" %
(ceph_client_name, ceph_client_key))
key_opt = "--keyring %s" % key_file
auth_sec_dict = {
"sec_usage": auth_sec_usage_type,
"sec_name": "ceph_auth_secret"
}
auth_sec_uuid = libvirt.create_secret(auth_sec_dict)
virsh.secret_set_value(auth_sec_uuid,
ceph_auth_key,
ignore_status=False,
debug=True)
disk_auth_dict = {
"auth_user": ceph_auth_user,
"secret_type": auth_sec_usage_type,
"secret_uuid": auth_sec_uuid
}
else:
test.error("No ceph client name/key provided.")
device_source = "rbd:%s:mon_host=%s:keyring=%s" % (
ceph_disk_name, ceph_mon_ip, key_file)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm "
"{2}".format(ceph_mon_ip, key_opt, ceph_disk_name))
cmd_result = process.run(cmd, ignore_status=True, shell=True)
logging.debug("pre clean up rbd disk if exists: %s", cmd_result)
if blockcopy_option in ['reuse_external']:
# Create an local image and make FS on it.
libvirt.create_local_disk("file", img_file, storage_size,
device_format)
# Convert the image to remote storage
disk_path = ("rbd:%s:mon_host=%s" %
(ceph_disk_name, ceph_mon_ip))
if ceph_client_name and ceph_client_key:
disk_path += (":id=%s:key=%s" %
(ceph_auth_user, ceph_auth_key))
rbd_cmd = (
"rbd -m %s %s info %s 2> /dev/null|| qemu-img convert -O"
" %s %s %s" % (ceph_mon_ip, key_opt, ceph_disk_name,
device_format, img_file, disk_path))
process.run(rbd_cmd, ignore_status=False, shell=True)
disk_src_dict = {
"attrs": {
"protocol": "rbd",
"name": ceph_disk_name
},
"hosts": [{
"name": ceph_host_ip,
"port": ceph_host_port
}]
}
checkout_device_source = ceph_disk_name
elif backend_storage_type == "nbd":
# Get server hostname.
hostname = socket.gethostname().strip()
# Setup backend storage
nbd_server_host = hostname
nbd_server_port = params.get("nbd_server_port")
image_path = params.get("emulated_image",
"/var/lib/libvirt/images/nbdtest.img")
# Create NbdExport object
nbd = NbdExport(image_path,
image_format=device_format,
port=nbd_server_port)
nbd.start_nbd_server()
# Prepare disk source xml
source_attrs_dict = {"protocol": "nbd"}
disk_src_dict = {}
disk_src_dict.update({"attrs": source_attrs_dict})
disk_src_dict.update({
"hosts": [{
"name": nbd_server_host,
"port": nbd_server_port
}]
})
device_source = "nbd://%s:%s/%s" % (nbd_server_host,
nbd_server_port, image_path)
checkout_device_source = image_path
if blockcopy_option in ['pivot']:
ignore_check = True
logging.debug("device source is: %s", device_source)
# Add disk xml.
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disk_xml = Disk(type_name=device_type)
disk_xml.device = device
disk_xml.target = {"dev": device_target, "bus": device_bus}
driver_dict = {"name": "qemu", "type": device_format}
disk_xml.driver = driver_dict
disk_source = disk_xml.new_disk_source(**disk_src_dict)
auth_in_source = True
if disk_auth_dict:
logging.debug("disk auth dict is: %s" % disk_auth_dict)
disk_source.auth = disk_xml.new_auth(**disk_auth_dict)
disk_xml.source = disk_source
logging.debug("new disk xml is: %s", disk_xml)
# Sync VM xml
device_source_path = os.path.join(data_dir.get_tmp_dir(), "source.raw")
tmp_device_source = libvirt.create_local_disk("file",
path=device_source_path,
size=size,
disk_format="raw")
s_attach = virsh.attach_disk(vm_name,
tmp_device_source,
device_target,
"--config",
debug=True)
libvirt.check_exit_status(s_attach)
try:
vm.start()
vm.wait_for_login().close()
except xcepts.LibvirtXMLError as xml_error:
if not define_error:
test.fail("Failed to define VM:\n%s", str(xml_error))
except virt_vm.VMStartError as details:
# VM cannot be started
if status_error:
logging.info("VM failed to start as expected: %s",
str(details))
else:
test.fail("VM should start but failed: %s" % str(details))
# Additional operations before set block threshold
options = params.get("options",
"--pivot --transient-job --verbose --wait")
result = virsh.blockcopy(vm_name,
device_target,
"--xml %s" % disk_xml.xml,
options=options,
debug=True)
libvirt.check_exit_status(result)
check_source_image = None
if blockcopy_option in ['pivot']:
check_source_image = checkout_device_source
else:
check_source_image = tmp_device_source
check_blockcopy_xml(vm_name, check_source_image, ignore_check)
finally:
# Delete snapshots.
if virsh.domain_exists(vm_name):
#To Delete snapshot, destroy vm first.
if vm.is_alive():
vm.destroy()
libvirt.clean_up_snapshots(vm_name, domxml=vmxml_backup)
vmxml_backup.sync("--snapshots-metadata")
if os.path.exists(img_file):
libvirt.delete_local_disk("file", img_file)
for img in disks_img:
if os.path.exists(img["path"]):
libvirt.delete_local_disk("file", img["path"])
# Clean up backend storage
if backend_storage_type == "iscsi":
libvirt.setup_or_cleanup_iscsi(is_setup=False)
elif backend_storage_type == "ceph":
# Remove ceph configure file if created.
if ceph_cfg:
os.remove(ceph_cfg)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm "
"{2}".format(ceph_mon_ip, key_opt, ceph_disk_name))
cmd_result = process.run(cmd, ignore_status=True, shell=True)
logging.debug("result of rbd removal: %s", cmd_result.stdout_text)
if os.path.exists(key_file):
os.remove(key_file)
elif backend_storage_type == "nbd":
if nbd:
try:
nbd.cleanup()
except Exception as ndbEx:
logging.error("Clean Up nbd failed: %s" % str(ndbEx))
# Clean up secrets
if auth_sec_uuid:
virsh.secret_undefine(auth_sec_uuid)
def run(test, params, env):
"""
Test command: virsh blockcopy.
This command can copy a disk backing image chain to dest.
1. Positive testing
1.1 Copy a disk to a new image file.
1.2 Reuse existing destination copy.
1.3 Valid blockcopy timeout and bandwidth test.
2. Negative testing
2.1 Copy a disk to a non-exist directory.
2.2 Copy a disk with invalid options.
2.3 Do block copy for a persistent domain.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
target = params.get("target_disk", "")
replace_vm_disk = "yes" == params.get("replace_vm_disk", "no")
disk_source_protocol = params.get("disk_source_protocol")
disk_type = params.get("disk_type")
pool_name = params.get("pool_name")
image_size = params.get("image_size")
emu_image = params.get("emulated_image")
copy_to_nfs = "yes" == params.get("copy_to_nfs", "no")
mnt_path_name = params.get("mnt_path_name")
options = params.get("blockcopy_options", "")
bandwidth = params.get("blockcopy_bandwidth", "")
bandwidth_byte = "yes" == params.get("bandwidth_byte", "no")
reuse_external = "yes" == params.get("reuse_external", "no")
persistent_vm = params.get("persistent_vm", "no")
status_error = "yes" == params.get("status_error", "no")
active_error = "yes" == params.get("active_error", "no")
active_snap = "yes" == params.get("active_snap", "no")
active_save = "yes" == params.get("active_save", "no")
check_state_lock = "yes" == params.get("check_state_lock", "no")
check_finish_job = "yes" == params.get("check_finish_job", "yes")
with_shallow = "yes" == params.get("with_shallow", "no")
with_blockdev = "yes" == params.get("with_blockdev", "no")
setup_libvirt_polkit = "yes" == params.get('setup_libvirt_polkit')
bug_url = params.get("bug_url", "")
timeout = int(params.get("timeout", 1200))
relative_path = params.get("relative_path")
rerun_flag = 0
blkdev_n = None
back_n = 'blockdev-backing-iscsi'
snapshot_external_disks = []
snapshots_take = int(params.get("snapshots_take", '0'))
external_disk_only_snapshot = "yes" == params.get(
"external_disk_only_snapshot", "no")
enable_iscsi_auth = "yes" == params.get("enable_iscsi_auth", "no")
# Skip/Fail early
if with_blockdev and not libvirt_version.version_compare(1, 2, 13):
raise exceptions.TestSkipError("--blockdev option not supported in "
"current version")
if not target:
raise exceptions.TestSkipError("Require target disk to copy")
if setup_libvirt_polkit and not libvirt_version.version_compare(1, 1, 1):
raise exceptions.TestSkipError("API acl test not supported in current"
" libvirt version")
if copy_to_nfs and not libvirt_version.version_compare(1, 1, 1):
raise exceptions.TestSkipError("Bug will not fix: %s" % bug_url)
if bandwidth_byte and not libvirt_version.version_compare(1, 3, 3):
raise exceptions.TestSkipError("--bytes option not supported in "
"current version")
if relative_path == "yes" and not libvirt_version.version_compare(3, 0, 0):
test.cancel(
"Forbid using relative path or file name only is added since libvirt-3.0.0"
)
if "--transient-job" in options and not libvirt_version.version_compare(
4, 5, 0):
test.cancel(
"--transient-job option is supported until libvirt 4.5.0 version")
# Check the source disk
if vm_xml.VMXML.check_disk_exist(vm_name, target):
logging.debug("Find %s in domain %s", target, vm_name)
else:
raise exceptions.TestFail("Can't find %s in domain %s" %
(target, vm_name))
original_xml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
tmp_dir = data_dir.get_tmp_dir()
# Prepare dest path params
dest_path = params.get("dest_path", "")
dest_format = params.get("dest_format", "")
# Ugh... this piece of chicanery brought to you by the QemuImg which
# will "add" the 'dest_format' extension during the check_format code.
# So if we create the file with the extension and then remove it when
# doing the check_format later, then we avoid erroneous failures.
dest_extension = ""
if dest_format != "":
dest_extension = ".%s" % dest_format
# Prepare for --reuse-external option
if reuse_external:
options += "--reuse-external --wait"
# Set rerun_flag=1 to do blockcopy twice, and the first time created
# file can be reused in the second time if no dest_path given
# This will make sure the image size equal to original disk size
if dest_path == "/path/non-exist":
if os.path.exists(dest_path) and not os.path.isdir(dest_path):
os.remove(dest_path)
else:
rerun_flag = 1
# Prepare other options
if dest_format == "raw":
options += " --raw"
if with_blockdev:
options += " --blockdev"
if len(bandwidth):
options += " --bandwidth %s" % bandwidth
if bandwidth_byte:
options += " --bytes"
if with_shallow:
options += " --shallow"
# Prepare acl options
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
extra_dict = {
'uri': uri,
'unprivileged_user': unprivileged_user,
'debug': True,
'ignore_status': True,
'timeout': timeout
}
libvirtd_utl = utils_libvirtd.Libvirtd()
libvirtd_log_path = os.path.join(data_dir.get_tmp_dir(),
"libvirt_daemons.log")
libvirtd_conf_dict = {
"log_filter": '"3:json 1:libvirt 1:qemu"',
"log_outputs": '"1:file:%s"' % libvirtd_log_path
}
logging.debug("the libvirtd conf file content is :\n %s" %
libvirtd_conf_dict)
libvirtd_conf = utl.customize_libvirt_config(libvirtd_conf_dict)
def check_format(dest_path, dest_extension, expect):
"""
Check the image format
:param dest_path: Path of the copy to create
:param expect: Expect image format
"""
# And now because the QemuImg will add the extension for us
# we have to remove it here.
path_noext = dest_path.strip(dest_extension)
params['image_name'] = path_noext
params['image_format'] = expect
image = qemu_storage.QemuImg(params, "/", path_noext)
if image.get_format() == expect:
logging.debug("%s format is %s", dest_path, expect)
else:
raise exceptions.TestFail("%s format is not %s" %
(dest_path, expect))
def _blockjob_and_libvirtd_chk(cmd_result):
"""
Raise TestFail when blockcopy fail with block-job-complete error or
blockcopy hang with state change lock.
This is a specific bug verify, so ignore status_error here.
"""
failure_msg = ""
err_msg = "internal error: unable to execute QEMU command"
err_msg += " 'block-job-complete'"
if err_msg in cmd_result.stderr:
failure_msg += "Virsh cmd error happened: %s\n" % err_msg
err_pattern = "Timed out during operation: cannot acquire"
err_pattern += " state change lock"
ret = chk_libvirtd_log(libvirtd_log_path, err_pattern, "error")
if ret:
failure_msg += "Libvirtd log error happened: %s\n" % err_pattern
if failure_msg:
if not libvirt_version.version_compare(1, 3, 2):
bug_url_ = "https://bugzilla.redhat.com/show_bug.cgi?id=1197592"
failure_msg += "Hit on bug: %s " % bug_url_
test.fail(failure_msg)
def _make_snapshot(snapshot_numbers_take):
"""
Make external disk snapshot
:param snapshot_numbers_take: snapshot numbers.
"""
for count in range(0, snapshot_numbers_take):
snap_xml = snapshot_xml.SnapshotXML()
snapshot_name = "blockcopy_snap"
snap_xml.snap_name = snapshot_name + "_%s" % count
snap_xml.description = "blockcopy snapshot"
# Add all disks into xml file.
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
disks = vmxml.devices.by_device_tag('disk')
# Remove non-storage disk such as 'cdrom'
for disk in disks:
if disk.device != 'disk':
disks.remove(disk)
new_disks = []
src_disk_xml = disks[0]
disk_xml = snap_xml.SnapDiskXML()
disk_xml.xmltreefile = src_disk_xml.xmltreefile
del disk_xml.device
del disk_xml.address
disk_xml.snapshot = "external"
disk_xml.disk_name = disk_xml.target['dev']
# Only qcow2 works as external snapshot file format, update it
# here
driver_attr = disk_xml.driver
driver_attr.update({'type': 'qcow2'})
disk_xml.driver = driver_attr
new_attrs = disk_xml.source.attrs
if 'file' in disk_xml.source.attrs:
new_file = os.path.join(tmp_dir,
"blockcopy_shallow_%s.snap" % count)
snapshot_external_disks.append(new_file)
new_attrs.update({'file': new_file})
hosts = None
elif ('dev' in disk_xml.source.attrs
or 'name' in disk_xml.source.attrs
or 'pool' in disk_xml.source.attrs):
if (disk_xml.type_name == 'block'
or disk_source_protocol == 'iscsi'):
disk_xml.type_name = 'block'
if 'name' in new_attrs:
del new_attrs['name']
del new_attrs['protocol']
elif 'pool' in new_attrs:
del new_attrs['pool']
del new_attrs['volume']
del new_attrs['mode']
back_path = utl.setup_or_cleanup_iscsi(
is_setup=True,
is_login=True,
image_size="1G",
emulated_image=back_n)
emulated_iscsi.append(back_n)
cmd = "qemu-img create -f qcow2 %s 1G" % back_path
process.run(cmd, shell=True)
new_attrs.update({'dev': back_path})
hosts = None
new_src_dict = {"attrs": new_attrs}
if hosts:
new_src_dict.update({"hosts": hosts})
disk_xml.source = disk_xml.new_disk_source(**new_src_dict)
new_disks.append(disk_xml)
snap_xml.set_disks(new_disks)
snapshot_xml_path = snap_xml.xml
logging.debug("The snapshot xml is: %s" % snap_xml.xmltreefile)
options = "--disk-only --xmlfile %s " % snapshot_xml_path
snapshot_result = virsh.snapshot_create(vm_name,
options,
debug=True)
if snapshot_result.exit_status != 0:
raise exceptions.TestFail(snapshot_result.stderr)
snap_path = ''
save_path = ''
emulated_iscsi = []
nfs_cleanup = False
try:
# Prepare dest_path
tmp_file = time.strftime("%Y-%m-%d-%H.%M.%S.img")
tmp_file += dest_extension
if not dest_path:
if enable_iscsi_auth:
utils_secret.clean_up_secrets()
setup_auth_enabled_iscsi_disk(vm, params)
dest_path = os.path.join(tmp_dir, tmp_file)
elif with_blockdev:
blkdev_n = 'blockdev-iscsi'
dest_path = utl.setup_or_cleanup_iscsi(is_setup=True,
is_login=True,
image_size=image_size,
emulated_image=blkdev_n)
emulated_iscsi.append(blkdev_n)
# Make sure the new disk show up
utils_misc.wait_for(lambda: os.path.exists(dest_path), 5)
else:
if copy_to_nfs:
tmp_dir = "%s/%s" % (tmp_dir, mnt_path_name)
dest_path = os.path.join(tmp_dir, tmp_file)
# Domain disk replacement with desire type
if replace_vm_disk:
# Calling 'set_vm_disk' is bad idea as it left lots of cleanup jobs
# after test, such as pool, volume, nfs, iscsi and so on
# TODO: remove this function in the future
if disk_source_protocol == 'iscsi':
emulated_iscsi.append(emu_image)
if disk_source_protocol == 'netfs':
nfs_cleanup = True
utl.set_vm_disk(vm, params, tmp_dir, test)
new_xml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
if with_shallow or external_disk_only_snapshot or enable_iscsi_auth:
_make_snapshot(snapshots_take)
# Prepare transient/persistent vm
if persistent_vm == "no" and vm.is_persistent():
vm.undefine()
elif persistent_vm == "yes" and not vm.is_persistent():
new_xml.define()
# Run blockcopy command to create destination file
if rerun_flag == 1:
options1 = "--wait %s --finish --verbose" % dest_format
if with_blockdev:
options1 += " --blockdev"
if with_shallow:
options1 += " --shallow"
cmd_result = virsh.blockcopy(vm_name, target, dest_path, options1,
**extra_dict)
status = cmd_result.exit_status
if status != 0:
raise exceptions.TestFail("Run blockcopy command fail: %s" %
cmd_result.stdout.strip() +
cmd_result.stderr)
elif not os.path.exists(dest_path):
raise exceptions.TestFail("Cannot find the created copy")
if "--transient-job" in options:
pool = ThreadPool(processes=1)
async_result = pool.apply_async(
blockcopy_thread, (vm_name, target, dest_path, options))
kill_blockcopy_process()
utl.check_blockjob(vm_name, target)
return
# Run the real testing command
cmd_result = virsh.blockcopy(vm_name, target, dest_path, options,
**extra_dict)
# check BZ#1197592
_blockjob_and_libvirtd_chk(cmd_result)
status = cmd_result.exit_status
if not libvirtd_utl.is_running():
raise exceptions.TestFail("Libvirtd service is dead")
if not status_error:
if status == 0:
ret = utils_misc.wait_for(
lambda: check_xml(vm_name, target, dest_path, options), 5)
if not ret:
raise exceptions.TestFail("Domain xml not expected after"
" blockcopy")
if options.count("--bandwidth"):
if options.count('--bytes'):
bandwidth += 'B'
else:
bandwidth += 'M'
if not (bandwidth
in ['0B', '0M']) and not utl.check_blockjob(
vm_name, target, "bandwidth", bandwidth):
raise exceptions.TestFail("Check bandwidth failed")
val = options.count("--pivot") + options.count("--finish")
# Don't wait for job finish when using --byte option
val += options.count('--bytes')
if val == 0 and check_finish_job:
try:
finish_job(vm_name, target, timeout)
except JobTimeout as excpt:
raise exceptions.TestFail("Run command failed: %s" %
excpt)
if options.count("--raw") and not with_blockdev:
check_format(dest_path, dest_extension, dest_format)
if active_snap:
snap_path = "%s/%s.snap" % (tmp_dir, vm_name)
snap_opt = "--disk-only --atomic --no-metadata "
snap_opt += "vda,snapshot=external,file=%s" % snap_path
ret = virsh.snapshot_create_as(vm_name,
snap_opt,
ignore_status=True,
debug=True)
utl.check_exit_status(ret, active_error)
if active_save:
save_path = "%s/%s.save" % (tmp_dir, vm_name)
ret = virsh.save(vm_name,
save_path,
ignore_status=True,
debug=True)
utl.check_exit_status(ret, active_error)
if check_state_lock:
# Run blockjob pivot in subprocess as it will hang
# for a while, run blockjob info again to check
# job state
command = "virsh blockjob %s %s --pivot" % (vm_name,
target)
session = aexpect.ShellSession(command)
ret = virsh.blockjob(vm_name, target, "--info")
err_info = "cannot acquire state change lock"
if err_info in ret.stderr:
raise exceptions.TestFail("Hit on bug: %s" % bug_url)
utl.check_exit_status(ret, status_error)
session.close()
else:
raise exceptions.TestFail(cmd_result.stdout.strip() +
cmd_result.stderr)
else:
if status:
logging.debug("Expect error: %s", cmd_result.stderr)
else:
# Commit id '4c297728' changed how virsh exits when
# unexpectedly failing due to timeout from a fail (1)
# to a success(0), so we need to look for a different
# marker to indicate the copy aborted. As "stdout: Now
# in mirroring phase" could be in stdout which fail the
# check, so also do check in libvirtd log to confirm.
if options.count("--timeout") and options.count("--wait"):
log_pattern = "Copy aborted"
if (re.search(log_pattern, cmd_result.stdout.strip())
or chk_libvirtd_log(libvirtd_log_path, log_pattern,
"debug")):
logging.debug("Found success a timed out block copy")
else:
raise exceptions.TestFail("Expect fail, but run "
"successfully: %s" % bug_url)
finally:
# Recover VM may fail unexpectedly, we need using try/except to
# proceed the following cleanup steps
try:
# Abort exist blockjob to avoid any possible lock error
virsh.blockjob(vm_name, target, '--abort', ignore_status=True)
vm.destroy(gracefully=False)
# It may take a long time to shutdown the VM which has
# blockjob running
utils_misc.wait_for(
lambda: virsh.domstate(vm_name, ignore_status=True).
exit_status, 180)
if virsh.domain_exists(vm_name):
if active_snap or with_shallow:
option = "--snapshots-metadata"
else:
option = None
original_xml.sync(option)
else:
original_xml.define()
except Exception as e:
logging.error(e)
for disk in snapshot_external_disks:
if os.path.exists(disk):
os.remove(disk)
# Clean up libvirt pool, which may be created by 'set_vm_disk'
if disk_type == 'volume':
virsh.pool_destroy(pool_name, ignore_status=True, debug=True)
# Restore libvirtd conf and restart libvirtd
libvirtd_conf.restore()
libvirtd_utl.restart()
if libvirtd_log_path and os.path.exists(libvirtd_log_path):
os.unlink(libvirtd_log_path)
# Clean up NFS
try:
if nfs_cleanup:
utl.setup_or_cleanup_nfs(is_setup=False)
except Exception as e:
logging.error(e)
# Clean up iSCSI
try:
for iscsi_n in list(set(emulated_iscsi)):
utl.setup_or_cleanup_iscsi(is_setup=False,
emulated_image=iscsi_n)
# iscsid will be restarted, so give it a break before next loop
time.sleep(5)
except Exception as e:
logging.error(e)
if os.path.exists(dest_path):
os.remove(dest_path)
if os.path.exists(snap_path):
os.remove(snap_path)
if os.path.exists(save_path):
os.remove(save_path)
# Restart virtlogd service to release VM log file lock
try:
path.find_command('virtlogd')
process.run('systemctl reset-failed virtlogd')
process.run('systemctl restart virtlogd ')
except path.CmdNotFoundError:
pass
def run(test, params, env):
"""
Test virsh domblkthreshold option.
1.Prepare backend storage (file/luks/iscsi/gluster/ceph/nbd)
2.Start VM
3.Set domblkthreshold on target device in VM
4.Trigger one threshold event
5.Check threshold event is received as expected
6.Clean up test environment
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
block_threshold_timeout = params.get("block_threshold_timeout", "120")
event_type = params.get("event_type", "block-threshold")
block_threshold_option = params.get("block_threshold_option", "--loop")
def set_vm_block_domblkthreshold(vm_name, target_device, threshold, **dargs):
"""
Set VM block threshold on specific target device.
:param vm_name: VM name.
:param target_device: target device in VM
:param threshold: threshold value with specific unit such as 100M
:param dargs: mutable parameter dict
"""
ret = virsh.domblkthreshold(vm_name, target_device, threshold, **dargs)
libvirt.check_exit_status(ret)
def trigger_block_threshold_event(vm_domain, target):
"""
Trigger block threshold event.
:param vm_domain: VM name
:param target: Disk dev in VM.
"""
try:
session = vm_domain.wait_for_login()
time.sleep(10)
cmd = ("fdisk -l /dev/{0} && mkfs.ext4 -F /dev/{0} && "
" mount /dev/{0} /mnt && "
" dd if=/dev/urandom of=/mnt/bigfile bs=1M count=101"
.format(target))
status, output = session.cmd_status_output(cmd)
if status:
test.error("Failed to mount and fill data in VM: %s" % output)
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
raise
def check_threshold_event(vm_name, event_type, event_timeout, options, **dargs):
"""
Check threshold event.
:param vm_name: VM name
:param event_type: event type.
:param event_timeout: event timeout value
:param options: event option
:dargs: dynamic parameters.
"""
ret = virsh.event(vm_name, event_type, event_timeout, options, **dargs)
logging.debug(ret.stdout_text)
libvirt.check_exit_status(ret)
def create_vol(p_name, vol_params):
"""
Create volume.
:param p_name: Pool name.
:param vol_params: Volume parameters dict.
"""
# Clean up dirty volumes if pool has.
pv = libvirt_storage.PoolVolume(p_name)
vol_name_list = pv.list_volumes()
for vol_name in vol_name_list:
pv.delete_volume(vol_name)
volxml = vol_xml.VolXML()
v_xml = volxml.new_vol(**vol_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create(p_name, v_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
def trigger_block_commit(vm_name, target, blockcommit_options, **virsh_dargs):
"""
Trigger blockcommit.
:param vm_name: VM name
:param target: Disk dev in VM.
:param blockcommit_options: blockcommit option
:param virsh_dargs: additional parameters
"""
result = virsh.blockcommit(vm_name, target,
blockcommit_options, ignore_status=False, **virsh_dargs)
def trigger_block_copy(vm_name, target, dest_path, blockcopy_options, **virsh_dargs):
"""
Trigger blockcopy
:param vm_name: string, VM name
:param target: string, target disk
:param dest_path: string, the path of copied disk
:param blockcopy_options: string, some options applied
:param virsh_dargs: additional options
"""
result = virsh.blockcopy(vm_name, target, dest_path, blockcopy_options, **virsh_dargs)
libvirt.check_exit_status(result)
def trigger_mirror_threshold_event(vm_domain, target):
"""
Trigger mirror mode block threshold event.
:param vm_domain: VM name
:param target: Disk target in VM.
"""
try:
session = vm_domain.wait_for_login()
# Sleep 10 seconds to let wait for events thread start first in main thread
time.sleep(10)
cmd = ("dd if=/dev/urandom of=file bs=1G count=3")
status, output = session.cmd_status_output(cmd)
if status:
test.error("Failed to fill data in VM target: %s with %s" % (target, output))
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
raise
except Exception as ex:
raise
def get_mirror_source_index(vm_name, dev_index=0):
"""
Get mirror source index
:param vm_name: VM name
:param dev_index: Disk device index.
:return mirror source index in integer
"""
disk_list = vm_xml.VMXML.get_disk_source(vm_name)
disk_mirror = disk_list[dev_index].find('mirror')
if disk_mirror is None:
test.fail("Failed to get disk mirror")
disk_mirror_source = disk_mirror.find('source')
return int(disk_mirror_source.get('index'))
# Disk specific attributes.
device = params.get("virt_disk_device", "disk")
device_target = params.get("virt_disk_device_target", "vdd")
device_format = params.get("virt_disk_device_format", "raw")
device_type = params.get("virt_disk_device_type", "file")
device_bus = params.get("virt_disk_device_bus", "virtio")
backend_storage_type = params.get("backend_storage_type", "iscsi")
# Backend storage auth info
storage_size = params.get("storage_size", "1G")
enable_auth = "yes" == params.get("enable_auth")
use_auth_usage = "yes" == params.get("use_auth_usage")
auth_sec_usage_type = params.get("auth_sec_usage_type", "iscsi")
auth_sec_usage_target = params.get("auth_sec_usage_target", "libvirtiscsi")
auth_sec_uuid = ""
luks_sec_uuid = ""
disk_auth_dict = {}
disk_encryption_dict = {}
status_error = "yes" == params.get("status_error")
define_error = "yes" == params.get("define_error")
mirror_mode_blockcommit = "yes" == params.get("mirror_mode_blockcommit", "no")
mirror_mode_blockcopy = "yes" == params.get("mirror_mode_blockcopy", "no")
default_snapshot_test = "yes" == params.get("default_snapshot_test", "no")
block_threshold_value = params.get("block_threshold_value", "100M")
snapshot_external_disks = []
tmp_dir = data_dir.get_tmp_dir()
dest_path = params.get("dest_path", "/var/lib/libvirt/images/newclone")
pvt = None
# Initialize one NbdExport object
nbd = None
img_file = os.path.join(data_dir.get_tmp_dir(),
"%s_test.img" % vm_name)
if ((backend_storage_type == "luks") and
not libvirt_version.version_compare(3, 9, 0)):
test.cancel("Cannot support <encryption> inside disk in this libvirt version.")
# Start VM and get all partitions in VM.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = utils_disk.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
# Additional disk images.
disks_img = []
try:
# Clean up dirty secrets in test environments if there are.
utils_secret.clean_up_secrets()
# Setup backend storage
if backend_storage_type == "file":
image_filename = params.get("image_filename", "raw.img")
disk_path = os.path.join(data_dir.get_tmp_dir(), image_filename)
device_source = libvirt.create_local_disk(backend_storage_type, disk_path, storage_size, device_format)
disks_img.append({"format": device_format,
"source": disk_path, "path": disk_path})
disk_src_dict = {'attrs': {'file': device_source,
'type_name': 'file'}}
# Setup backend storage
elif backend_storage_type == "luks":
luks_encrypt_passwd = params.get("luks_encrypt_passwd", "password")
luks_secret_passwd = params.get("luks_secret_passwd", "password")
# Create secret
luks_sec_uuid = libvirt.create_secret(params)
logging.debug("A secret created with uuid = '%s'", luks_sec_uuid)
virsh.secret_set_value(luks_sec_uuid, luks_secret_passwd,
encode=True, ignore_status=False, debug=True)
image_filename = params.get("image_filename", "raw.img")
device_source = os.path.join(data_dir.get_tmp_dir(), image_filename)
disks_img.append({"format": device_format,
"source": device_source, "path": device_source})
disk_src_dict = {'attrs': {'file': device_source,
'type_name': 'file'}}
disk_encryption_dict = {"encryption": "luks",
"secret": {"type": "passphrase",
"uuid": luks_sec_uuid}}
cmd = ("qemu-img create -f luks "
"--object secret,id=sec0,data=`printf '%s' | base64`,format=base64 "
"-o key-secret=sec0 %s %s" % (luks_encrypt_passwd, device_source, storage_size))
if process.system(cmd, shell=True):
test.error("Can't create a luks encrypted img by qemu-img")
elif backend_storage_type == "iscsi":
iscsi_host = params.get("iscsi_host")
iscsi_port = params.get("iscsi_port")
if device_type == "block":
device_source = libvirt.setup_or_cleanup_iscsi(is_setup=True)
disk_src_dict = {'attrs': {'dev': device_source}}
elif device_type == "network":
chap_user = params.get("chap_user", "redhat")
chap_passwd = params.get("chap_passwd", "password")
auth_sec_usage = params.get("auth_sec_usage",
"libvirtiscsi")
auth_sec_dict = {"sec_usage": "iscsi",
"sec_target": auth_sec_usage}
auth_sec_uuid = libvirt.create_secret(auth_sec_dict)
# Set password of auth secret (not luks encryption secret)
virsh.secret_set_value(auth_sec_uuid, chap_passwd,
encode=True, ignore_status=False, debug=True)
iscsi_target, lun_num = libvirt.setup_or_cleanup_iscsi(
is_setup=True, is_login=False, image_size=storage_size,
chap_user=chap_user, chap_passwd=chap_passwd,
portal_ip=iscsi_host)
# ISCSI auth attributes for disk xml
disk_auth_dict = {"auth_user": chap_user,
"secret_type": auth_sec_usage_type,
"secret_usage": auth_sec_usage_target}
device_source = "iscsi://%s:%s/%s/%s" % (iscsi_host, iscsi_port,
iscsi_target, lun_num)
disk_src_dict = {"attrs": {"protocol": "iscsi",
"name": "%s/%s" % (iscsi_target, lun_num)},
"hosts": [{"name": iscsi_host, "port": iscsi_port}]}
elif backend_storage_type == "gluster":
gluster_vol_name = params.get("gluster_vol_name", "gluster_vol1")
gluster_pool_name = params.get("gluster_pool_name", "gluster_pool1")
gluster_img_name = params.get("gluster_img_name", "gluster1.img")
gluster_host_ip = gluster.setup_or_cleanup_gluster(
is_setup=True,
vol_name=gluster_vol_name,
pool_name=gluster_pool_name,
**params)
device_source = "gluster://%s/%s/%s" % (gluster_host_ip,
gluster_vol_name,
gluster_img_name)
cmd = ("qemu-img create -f %s "
"%s %s" % (device_format, device_source, storage_size))
if process.system(cmd, shell=True):
test.error("Can't create a gluster type img by qemu-img")
disk_src_dict = {"attrs": {"protocol": "gluster",
"name": "%s/%s" % (gluster_vol_name,
gluster_img_name)},
"hosts": [{"name": gluster_host_ip,
"port": "24007"}]}
elif backend_storage_type == "ceph":
ceph_host_ip = params.get("ceph_host_ip", "EXAMPLE_HOSTS")
ceph_mon_ip = params.get("ceph_mon_ip", "EXAMPLE_MON_HOST")
ceph_host_port = params.get("ceph_host_port", "EXAMPLE_PORTS")
ceph_disk_name = params.get("ceph_disk_name", "EXAMPLE_SOURCE_NAME")
ceph_client_name = params.get("ceph_client_name")
ceph_client_key = params.get("ceph_client_key")
ceph_auth_user = params.get("ceph_auth_user")
ceph_auth_key = params.get("ceph_auth_key")
enable_auth = "yes" == params.get("enable_auth")
key_file = os.path.join(data_dir.get_tmp_dir(), "ceph.key")
key_opt = ""
# Prepare a blank params to confirm if delete the configure at the end of the test
ceph_cfg = ""
if not utils_package.package_install(["ceph-common"]):
test.error("Failed to install ceph-common")
# Create config file if it doesn't exist
ceph_cfg = ceph.create_config_file(ceph_mon_ip)
# If enable auth, prepare a local file to save key
if ceph_client_name and ceph_client_key:
with open(key_file, 'w') as f:
f.write("[%s]\n\tkey = %s\n" %
(ceph_client_name, ceph_client_key))
key_opt = "--keyring %s" % key_file
auth_sec_dict = {"sec_usage": auth_sec_usage_type,
"sec_name": "ceph_auth_secret"}
auth_sec_uuid = libvirt.create_secret(auth_sec_dict)
virsh.secret_set_value(auth_sec_uuid, ceph_auth_key,
debug=True)
disk_auth_dict = {"auth_user": ceph_auth_user,
"secret_type": auth_sec_usage_type,
"secret_uuid": auth_sec_uuid}
else:
test.error("No ceph client name/key provided.")
device_source = "rbd:%s:mon_host=%s:keyring=%s" % (ceph_disk_name,
ceph_mon_ip,
key_file)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm "
"{2}".format(ceph_mon_ip, key_opt, ceph_disk_name))
cmd_result = process.run(cmd, ignore_status=True, shell=True)
logging.debug("pre clean up rbd disk if exists: %s", cmd_result)
# Create an local image and make FS on it.
disk_cmd = ("qemu-img create -f %s %s %s" %
(device_format, img_file, storage_size))
process.run(disk_cmd, ignore_status=False, shell=True)
# Convert the image to remote storage
disk_path = ("rbd:%s:mon_host=%s" %
(ceph_disk_name, ceph_mon_ip))
if ceph_client_name and ceph_client_key:
disk_path += (":id=%s:key=%s" %
(ceph_auth_user, ceph_auth_key))
rbd_cmd = ("rbd -m %s %s info %s 2> /dev/null|| qemu-img convert -O"
" %s %s %s" % (ceph_mon_ip, key_opt, ceph_disk_name,
device_format, img_file, disk_path))
process.run(rbd_cmd, ignore_status=False, shell=True)
disk_src_dict = {"attrs": {"protocol": "rbd",
"name": ceph_disk_name},
"hosts": [{"name": ceph_host_ip,
"port": ceph_host_port}]}
elif backend_storage_type == "nfs":
pool_name = params.get("pool_name", "nfs_pool")
pool_target = params.get("pool_target", "nfs_mount")
pool_type = params.get("pool_type", "netfs")
nfs_server_dir = params.get("nfs_server_dir", "nfs_server")
emulated_image = params.get("emulated_image")
image_name = params.get("nfs_image_name", "nfs.img")
tmp_dir = data_dir.get_tmp_dir()
pvt = libvirt.PoolVolumeTest(test, params)
pvt.pre_pool(pool_name, pool_type, pool_target, emulated_image)
# Set virt_use_nfs
virt_use_nfs = params.get("virt_use_nfs", "off")
result = process.run("setsebool virt_use_nfs %s" % virt_use_nfs, shell=True)
if result.exit_status:
test.error("Failed to set virt_use_nfs value")
nfs_mount_dir = os.path.join(tmp_dir, pool_target)
device_source = nfs_mount_dir + image_name
# Create one image on nfs server
libvirt.create_local_disk("file", device_source, '1', "raw")
disks_img.append({"format": device_format,
"source": device_source, "path": device_source})
disk_src_dict = {'attrs': {'file': device_source,
'type_name': 'file'}}
# Create dir based pool,and then create one volume on it.
elif backend_storage_type == "dir":
pool_name = params.get("pool_name", "dir_pool")
pool_target = params.get("pool_target")
pool_type = params.get("pool_type")
emulated_image = params.get("emulated_image")
image_name = params.get("dir_image_name", "luks_1.img")
# Create and start dir_based pool.
pvt = libvirt.PoolVolumeTest(test, params)
if not os.path.exists(pool_target):
os.mkdir(pool_target)
pvt.pre_pool(pool_name, pool_type, pool_target, emulated_image)
sp = libvirt_storage.StoragePool()
if not sp.is_pool_active(pool_name):
sp.set_pool_autostart(pool_name)
sp.start_pool(pool_name)
# Create one volume on the pool.
volume_name = params.get("vol_name")
volume_alloc = params.get("vol_alloc")
volume_cap_unit = params.get("vol_cap_unit")
volume_cap = params.get("vol_cap")
volume_target_path = params.get("sec_volume")
volume_target_format = params.get("target_format")
volume_target_encypt = params.get("target_encypt", "")
volume_target_label = params.get("target_label")
vol_params = {"name": volume_name, "capacity": int(volume_cap),
"allocation": int(volume_alloc), "format":
volume_target_format, "path": volume_target_path,
"label": volume_target_label,
"capacity_unit": volume_cap_unit}
try:
# If Libvirt version is lower than 2.5.0
# Creating luks encryption volume is not supported,so skip it.
create_vol(pool_name, vol_params)
except AssertionError as info:
err_msgs = ("create: invalid option")
if str(info).count(err_msgs):
test.cancel("Creating luks encryption volume "
"is not supported on this libvirt version")
else:
test.error("Failed to create volume."
"Error: %s" % str(info))
disk_src_dict = {'attrs': {'file': volume_target_path}}
device_source = volume_target_path
elif backend_storage_type == "nbd":
# Get server hostname.
hostname = process.run('hostname', ignore_status=False, shell=True, verbose=True).stdout_text.strip()
# Setup backend storage
nbd_server_host = hostname
nbd_server_port = params.get("nbd_server_port")
image_path = params.get("emulated_image", "/var/lib/libvirt/images/nbdtest.img")
# Create NbdExport object
nbd = NbdExport(image_path, image_format=device_format,
port=nbd_server_port)
nbd.start_nbd_server()
# Prepare disk source xml
source_attrs_dict = {"protocol": "nbd"}
disk_src_dict = {}
disk_src_dict.update({"attrs": source_attrs_dict})
disk_src_dict.update({"hosts": [{"name": nbd_server_host, "port": nbd_server_port}]})
device_source = "nbd://%s:%s/%s" % (nbd_server_host,
nbd_server_port,
image_path)
logging.debug("device source is: %s", device_source)
# Add disk xml.
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disk_xml = Disk(type_name=device_type)
disk_xml.device = device
disk_xml.target = {"dev": device_target, "bus": device_bus}
driver_dict = {"name": "qemu", "type": device_format}
disk_xml.driver = driver_dict
disk_source = disk_xml.new_disk_source(**disk_src_dict)
if disk_auth_dict:
logging.debug("disk auth dict is: %s" % disk_auth_dict)
disk_xml.auth = disk_xml.new_auth(**disk_auth_dict)
if disk_encryption_dict:
disk_encryption_dict = {"encryption": "luks",
"secret": {"type": "passphrase",
"uuid": luks_sec_uuid}}
disk_encryption = disk_xml.new_encryption(**disk_encryption_dict)
disk_xml.encryption = disk_encryption
disk_xml.source = disk_source
logging.debug("new disk xml is: %s", disk_xml)
# Sync VM xml except mirror_mode_blockcommit or mirror_mode_blockcopy
if (not mirror_mode_blockcommit and not mirror_mode_blockcopy):
vmxml.add_device(disk_xml)
try:
vmxml.sync()
vm.start()
vm.wait_for_login().close()
except xcepts.LibvirtXMLError as xml_error:
if not define_error:
test.fail("Failed to define VM:\n%s", str(xml_error))
except virt_vm.VMStartError as details:
# When use wrong password in disk xml for cold plug cases,
# VM cannot be started
if status_error:
logging.info("VM failed to start as expected: %s", str(details))
else:
test.fail("VM should start but failed: %s" % str(details))
func_name = trigger_block_threshold_event
# Additional operations before set block threshold
if backend_storage_type == "file":
logging.info("Create snapshot...")
snap_opt = " %s --disk-only "
snap_opt += "%s,snapshot=external,file=%s"
if default_snapshot_test:
for index in range(1, 5):
snapshot_name = "snapshot_%s" % index
snap_path = "%s/%s_%s.snap" % (tmp_dir, vm_name, index)
snapshot_external_disks.append(snap_path)
snap_option = snap_opt % (snapshot_name, device_target, snap_path)
virsh.snapshot_create_as(vm_name, snap_option,
ignore_status=False, debug=True)
if mirror_mode_blockcommit:
if not libvirt_version.version_compare(6, 6, 0):
test.cancel("Set threshold for disk mirroring feature is not supported on current version")
vmxml.del_device(disk_xml)
virsh.snapshot_create_as(vm_name, "--disk-only --no-metadata",
ignore_status=False, debug=True)
# Do active blockcommit in background.
blockcommit_options = "--active"
mirror_blockcommit_thread = threading.Thread(target=trigger_block_commit,
args=(vm_name, 'vda', blockcommit_options,),
kwargs={'debug': True})
mirror_blockcommit_thread.start()
device_target = "vda[1]"
func_name = trigger_mirror_threshold_event
if mirror_mode_blockcopy:
if not libvirt_version.version_compare(6, 6, 0):
test.cancel("Set threshold for disk mirroring feature is not supported on current version")
# Do transient blockcopy in backgroud.
blockcopy_options = "--transient-job "
# Do cleanup
if os.path.exists(dest_path):
libvirt.delete_local_disk("file", dest_path)
mirror_blockcopy_thread = threading.Thread(target=trigger_block_copy,
args=(vm_name, 'vda', dest_path, blockcopy_options,),
kwargs={'debug': True})
mirror_blockcopy_thread.start()
mirror_blockcopy_thread.join(10)
device_target = "vda[%d]" % get_mirror_source_index(vm_name)
func_name = trigger_mirror_threshold_event
set_vm_block_domblkthreshold(vm_name, device_target, block_threshold_value, **{"debug": True})
cli_thread = threading.Thread(target=func_name,
args=(vm, device_target))
cli_thread.start()
check_threshold_event(vm_name, event_type, block_threshold_timeout, block_threshold_option, **{"debug": True})
finally:
# Delete snapshots.
if virsh.domain_exists(vm_name):
#To delete snapshot, destroy VM first.
if vm.is_alive():
vm.destroy()
libvirt.clean_up_snapshots(vm_name, domxml=vmxml_backup)
vmxml_backup.sync("--snapshots-metadata")
if os.path.exists(img_file):
libvirt.delete_local_disk("file", img_file)
for img in disks_img:
if os.path.exists(img["path"]):
libvirt.delete_local_disk("file", img["path"])
for disk in snapshot_external_disks:
libvirt.delete_local_disk('file', disk)
if os.path.exists(dest_path):
libvirt.delete_local_disk("file", dest_path)
# Clean up backend storage
if backend_storage_type == "iscsi":
libvirt.setup_or_cleanup_iscsi(is_setup=False)
elif backend_storage_type == "gluster":
gluster.setup_or_cleanup_gluster(is_setup=False,
vol_name=gluster_vol_name,
pool_name=gluster_pool_name,
**params)
elif backend_storage_type == "ceph":
# Remove ceph configure file if created.
if ceph_cfg:
os.remove(ceph_cfg)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm "
"{2}".format(ceph_mon_ip, key_opt, ceph_disk_name))
cmd_result = process.run(cmd, ignore_status=True, shell=True)
logging.debug("result of rbd removal: %s", cmd_result)
if os.path.exists(key_file):
os.remove(key_file)
elif backend_storage_type == "nfs":
result = process.run("setsebool virt_use_nfs off",
shell=True)
if result.exit_status:
logging.info("Failed to restore virt_use_nfs value")
elif backend_storage_type == "nbd":
if nbd:
try:
nbd.cleanup()
except Exception as ndbEx:
logging.info("Clean Up nbd failed: %s" % str(ndbEx))
# Clean up secrets
if auth_sec_uuid:
virsh.secret_undefine(auth_sec_uuid)
if luks_sec_uuid:
virsh.secret_undefine(luks_sec_uuid)
# Clean up pools
if pvt:
pvt.cleanup_pool(pool_name, pool_type, pool_target, emulated_image)
def run(test, params, env):
"""
Test virsh blockpull with various option on VM.
1.Prepare backend storage (iscsi,nbd,file,block)
2.Start VM
3.Execute virsh blockpull target command
4.Check status after operation accomplished
5.Clean up test environment
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
def setup_iscsi_block_env(params):
"""
Setup iscsi as block test environment
:param params: one dict to wrap up parameters
"""
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
libvirt.setup_or_cleanup_iscsi(is_setup=False)
emulated_size = params.get("emulated_size", "10G")
chap_user = params.get("iscsi_user")
chap_passwd = params.get("iscsi_password")
auth_sec_usage_type = params.get("secret_usage_type")
encoding = locale.getpreferredencoding()
secret_string = base64.b64encode(
chap_passwd.encode(encoding)).decode(encoding)
device_source = libvirt.setup_or_cleanup_iscsi(
is_setup=True,
is_login=True,
image_size=emulated_size,
chap_user=chap_user,
chap_passwd=chap_passwd,
portal_ip="127.0.0.1")
auth_sec_uuid = libvirt_ceph_utils._create_secret(
auth_sec_usage_type, secret_string)
disk_auth_dict = {
"auth_user": chap_user,
"secret_type": auth_sec_usage_type,
"secret_uuid": auth_sec_uuid
}
disk_src_dict = {'attrs': {'dev': device_source}}
iscsi_disk = libvirt_disk.create_primitive_disk_xml(
type_name, disk_device, device_target, device_bus, device_format,
disk_src_dict, disk_auth_dict)
# Add disk xml.
logging.debug("disk xml is:\n%s" % iscsi_disk)
# Sync VM xml.
vmxml.add_device(iscsi_disk)
vmxml.sync()
def setup_file_env(params):
"""
Setup file test environment
:param params: one dict to wrap up parameters
"""
# If additional_disk is False, it means that there is no need to create additional disk
if additional_disk is False:
return
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
backstore_image_target_path = params.get("backstore_image_name")
tmp_blkpull_path.append(backstore_image_target_path)
libvirt.create_local_disk("file", backstore_image_target_path, "1",
"qcow2")
backing_chain_list.append(backstore_image_target_path)
disk_src_dict = {"attrs": {"file": backstore_image_target_path}}
file_disk = libvirt_disk.create_primitive_disk_xml(
type_name, disk_device, device_target, device_bus, device_format,
disk_src_dict, None)
logging.debug("disk xml is:\n%s" % file_disk)
# Sync VM xml.
vmxml.add_device(file_disk)
vmxml.sync()
_generate_backstore_attribute(params)
def _generate_backstore_attribute(params):
"""
Create one disk with backingStore attribute by creating snapshot
:param params: one dict to wrap up parameters
"""
device_target = params.get("virt_disk_device_target")
top_file_image_name = params.get("top_file_image_name")
second_file_image_name = params.get("second_file_image_name")
tmp_blkpull_path.append(top_file_image_name)
tmp_blkpull_path.append(second_file_image_name)
backing_chain_list.append(top_file_image_name)
if vm.is_dead():
vm.start()
snapshot_tmp_name = "blockpull_tmp_snap"
options = " %s --disk-only --diskspec %s,file=%s" % (
snapshot_tmp_name, 'vda', second_file_image_name)
options += " --diskspec %s,file=%s" % (device_target,
top_file_image_name)
virsh.snapshot_create_as(vm_name,
options,
ignore_status=False,
debug=True)
vm.destroy()
virsh.snapshot_delete(vm_name,
snapshot_tmp_name,
"--metadata",
ignore_status=False,
debug=True)
vmxml_dir = vm_xml.VMXML.new_from_dumpxml(vm_name)
logging.debug("backstore prepare readiness :\n%s", vmxml_dir)
def setup_block_env(params):
"""
Setup block test environment
:param params: one dict to wrap up parameters
"""
if additional_disk is False:
return
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
device_source = libvirt.setup_or_cleanup_iscsi(is_setup=True)
disk_src_dict = {'attrs': {'dev': device_source}}
backing_chain_list.append(device_source)
file_disk = libvirt_disk.create_primitive_disk_xml(
type_name, disk_device, device_target, device_bus, device_format,
disk_src_dict, None)
logging.debug("disk xml is:\n%s" % file_disk)
# Sync VM xml.
vmxml.add_device(file_disk)
vmxml.sync()
_generate_backstore_attribute(params)
def setup_nbd_env(params):
"""
Setup nbd test environment
:param params: one dict to wrap up parameters
"""
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
# Get server hostname.
hostname = process.run('hostname',
ignore_status=False,
shell=True,
verbose=True).stdout_text.strip()
# Setup backend storage
nbd_server_host = hostname
nbd_server_port = params.get("nbd_server_port", "10001")
image_path = params.get("emulated_image",
"/var/lib/libvirt/images/nbdtest.img")
enable_ga_agent = "yes" == params.get("enable_ga_agent", "no")
# Create NbdExport object
nbd = NbdExport(image_path,
image_format=device_format,
port=nbd_server_port)
nbd.start_nbd_server()
# Prepare disk source xml
source_attrs_dict = {"protocol": "nbd", "tls": "%s" % "no"}
disk_src_dict = {}
disk_src_dict.update({"attrs": source_attrs_dict})
disk_src_dict.update(
{"hosts": [{
"name": nbd_server_host,
"port": nbd_server_port
}]})
network_disk = libvirt_disk.create_primitive_disk_xml(
type_name, disk_device, device_target, device_bus, device_format,
disk_src_dict, None)
logging.debug("disk xml is:\n%s" % network_disk)
# Sync VM xml.
vmxml.add_device(network_disk)
vmxml.sync()
if enable_ga_agent:
vm.prepare_guest_agent()
vm.destroy(gracefully=False)
def check_chain_backing_files(chain_list, disk_target):
"""
Check chain backing files
:param chain_list: list, expected backing chain list
:param disk_target: disk target
"""
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disks = vmxml.devices.by_device_tag('disk')
disk_xml = None
for disk in disks:
if disk.target['dev'] == disk_target:
disk_xml = disk
break
logging.debug("disk xml in check_blockcommit_with_bandwidth: %s\n",
disk_xml.xmltreefile)
backingstore_list = disk_xml.get_backingstore_list()
backingstore_list.pop()
parse_source_file_list = [
elem.find('source').get('file') or elem.find('source').get('name')
or elem.find('source').get('dev') for elem in backingstore_list
]
logging.debug("before expected backing chain list is %s", chain_list)
chain_list = chain_list[0:3]
if backend_storage_type == "nbd":
chain_list = chain_list[0:1]
chain_list = chain_list[::-1]
logging.debug("expected backing chain list is %s", chain_list)
logging.debug("parse source list is %s", parse_source_file_list)
# Check whether two are equals
if blockpull_option in ['keep_relative']:
if parse_source_file_list[-1] != chain_list[-1]:
test.fail(
"checked backchain list in last element is not equals to expected one"
)
elif parse_source_file_list != chain_list:
test.fail("checked backchain list is not equals to expected one")
def _extend_blkpull_execution(base=None,
status_error=False,
err_msg=None,
expected_msg=None):
"""
Wrap up blockpull execution combining with various options
:params base: specific base
:params status_error: expected error or not
:params err_msg: error message if blockpull command fail
:params expected_msg: jobinfo expected message if checked
"""
blockpull_options = params.get("options")
if '--base' in blockpull_options:
if base:
blockpull_options = params.get("options") % base
else:
blockpull_options = params.get(
"options") % external_snapshot_disks[0]
result = virsh.blockpull(vm_name,
device_target,
blockpull_options,
ignore_status=True,
debug=True)
libvirt.check_exit_status(result, expect_error=status_error)
if status_error:
if err_msg not in result.stdout_text and err_msg not in result.stderr_text:
test.fail(
"Can not find failed message in standard output: %s or : %s"
% (result.stdout_text, result.stderr_text))
res = virsh.blockjob(vm_name, device_target, "--info").stdout.strip()
logging.debug("virsh jobinfo is :%s\n", res)
if expected_msg:
job_msg = expected_msg
else:
job_msg = "No current block job for %s" % device_target
if res and job_msg not in res:
test.fail("Find unexpected block job information in %s" % res)
def start_async_blkpull_on_vm():
"""Start blockpull with async"""
context_msg = "Pull aborted"
_extend_blkpull_execution(None, True, context_msg)
def start_bandwidth_blkpull_on_vm():
"""Start blockpull with bandwidth option """
_extend_blkpull_execution()
def start_timeout_blkpull_on_vm():
"""Start blockpull with timeout option """
_extend_blkpull_execution()
def start_middle_to_top_to_base_on_vm():
"""Start blockpull from middle to top """
_extend_blkpull_execution()
virsh.blockjob(vm_name, device_target, '--abort', ignore_status=True)
params.update({"options": params.get("top_options")})
_extend_blkpull_execution()
def start_reuse_external_blkpull_on_vm():
"""Start blockpull with reuse_external """
_extend_blkpull_execution(base=backing_chain_list[1])
check_chain_backing_files(backing_chain_list,
params.get("virt_disk_device_target"))
virsh.blockjob(vm_name, device_target, '--abort', ignore_status=True)
params.update({"options": params.get("top_options")})
_extend_blkpull_execution()
def start_top_as_base_blkpull_on_vm():
"""Start blockpull with top as base """
error_msg = "error: invalid argument"
_extend_blkpull_execution(base=backing_chain_list[-1],
status_error=True,
err_msg=error_msg)
def start_base_to_top_blkpull_on_vm():
"""Start blockpull with base as top """
_extend_blkpull_execution()
def start_middletotop_blkpull_on_vm():
"""start middletotop blockpull on vm """
_extend_blkpull_execution()
check_chain_backing_files(backing_chain_list,
params.get("virt_disk_device_target"))
# Disk specific attributes.
type_name = params.get("virt_disk_device_type")
disk_device = params.get("virt_disk_device")
device_target = params.get("virt_disk_device_target")
device_bus = params.get("virt_disk_device_bus")
device_format = params.get("virt_disk_device_format")
blockpull_option = params.get("blockpull_option")
options_value = params.get("options_value")
backend_storage_type = params.get("backend_storage_type")
backend_path = params.get("backend_path")
additional_disk = "yes" == params.get("additional_disk", "yes")
status_error = "yes" == params.get("status_error")
define_error = "yes" == params.get("define_error")
snapshot_take = int(params.get("snapshot_take", "4"))
fill_in_vm = "yes" == params.get("fill_in_vm", "no")
first_src_file = libvirt_disk.get_first_disk_source(vm)
pre_set_root_dir = os.path.dirname(first_src_file)
replace_disk_image = None
# Additional disk images.
tmp_dir = data_dir.get_data_dir()
tmp_blkpull_path = []
disks_img = []
external_snapshot_disks = []
attach_disk_xml = None
backing_chain_list = []
# Initialize one NbdExport object
nbd = None
# Start VM and get all partitions in VM.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = utils_disk.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
try:
utils_secret.clean_up_secrets()
# Setup backend storage
if backend_storage_type == "iscsi":
setup_iscsi_block_env(params)
elif backend_storage_type == "file":
setup_file_env(params)
elif backend_storage_type == "block":
setup_block_env(params)
elif backend_storage_type == "nbd":
setup_nbd_env(params)
try:
vm.start()
vm.wait_for_login().close()
except virt_vm.VMStartError as details:
# VM cannot be started
if status_error:
logging.info("VM failed to start as expected: %s",
str(details))
else:
test.fail("VM should start but failed: %s" % str(details))
if fill_in_vm:
libvirt_disk.fill_null_in_vm(vm, device_target)
if backend_path in ['native_path']:
external_snapshot_disks = libvirt_disk.make_external_disk_snapshots(
vm, device_target, "blockpull_snapshot", snapshot_take)
backing_chain_list.extend(external_snapshot_disks)
elif backend_path in ['reuse_external']:
replace_disk_image, backing_chain_list = libvirt_disk.make_relative_path_backing_files(
vm, pre_set_root_dir, first_src_file, device_format)
params.update({
'disk_source_name': replace_disk_image,
'disk_type': 'file',
'disk_format': 'qcow2',
'disk_source_protocol': 'file'
})
libvirt.set_vm_disk(vm, params, tmp_dir)
if blockpull_option in ['middle_to_top']:
start_middletotop_blkpull_on_vm()
if blockpull_option in ['async']:
start_async_blkpull_on_vm()
if blockpull_option in ['bandwidth']:
start_bandwidth_blkpull_on_vm()
if blockpull_option in ['timeout']:
start_timeout_blkpull_on_vm()
if blockpull_option in ['middle_to_top_to_base']:
start_middle_to_top_to_base_on_vm()
if blockpull_option in ['keep_relative']:
start_reuse_external_blkpull_on_vm()
if blockpull_option in ['top_as_base']:
start_top_as_base_blkpull_on_vm()
if blockpull_option in ['base_to_top']:
start_base_to_top_blkpull_on_vm()
finally:
# Recover VM.
libvirt.clean_up_snapshots(vm_name, domxml=vmxml_backup)
utils_secret.clean_up_secrets()
if vm.is_alive():
vm.destroy(gracefully=False)
vmxml_backup.sync()
# Delete reuse external disk if exists
for disk in external_snapshot_disks:
if os.path.exists(disk):
os.remove(disk)
# Clean up backend storage
for tmp_path in tmp_blkpull_path:
if os.path.exists(tmp_path):
libvirt.delete_local_disk('file', tmp_path)
if backend_storage_type == "iscsi":
libvirt.setup_or_cleanup_iscsi(is_setup=False)
if nbd:
nbd.cleanup()
# Clean up created folders
for folder in [
chr(letter) for letter in range(ord('a'),
ord('a') + 4)
]:
rm_cmd = "rm -rf %s" % os.path.join(pre_set_root_dir, folder)
process.run(rm_cmd, shell=True)
def run(test, params, env):
"""
Test embedded qemu driver:
1.Start guest by virt-qemu-run;
2.Start guest with luks disk by virt-qemu-run;
3.Options test for virt-qemu-run;
"""
log = []
def _logger(line):
"""
Callback function to log embeddedqemu output.
"""
log.append(line)
def _check_log():
"""
Check whether the output meets expectation
"""
if re.findall(expected_pattern, '\n'.join(log)):
return True
else:
return False
def _confirm_terminate():
"""
Confirm qemu process exits successfully after 'ctrl+c'
"""
cmd = 'pgrep qemu | wc -l'
output = int(process.run(cmd, shell=True).stdout_text.strip())
if output == virt_qemu_run.qemu_pro_num:
return True
else:
return False
def add_luks_disk(secret_type, sec_encryption_uuid):
# Add disk xml.
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disk_xml = Disk(type_name=disk_type)
disk_xml.device = "disk"
disk_source = disk_xml.new_disk_source(
**{"attrs": {'file': img_path}})
disk_xml.driver = {"name": "qemu", "type": img_format,
"cache": "none"}
disk_xml.target = {"dev": disk_target, "bus": disk_bus}
encryption_dict = {"encryption": 'luks',
"secret": {"type": secret_type,
"uuid": sec_encryption_uuid}}
disk_source.encryption = disk_xml.new_encryption(**encryption_dict)
disk_xml.source = disk_source
logging.debug("disk xml is:\n%s" % disk_xml)
vmxml.add_device(disk_xml)
logging.debug("guest xml: %s", vmxml.xml)
return vmxml
arg_str = params.get("embedded_arg", "")
expected_pattern = params.get("logger_pattern", "")
root_dir = params.get("root_dir", "/var/tmp/virt_qemu_run_dir")
config_path = params.get('expected_config_path', "")
terminate_guest = params.get("terminate_guest", "no") == "yes"
expected_secret = params.get("expected_secret", "no") == "yes"
no_valuefile = params.get("no_valuefile", "no") == "yes"
expected_root_dir = params.get("expected_root_dir", "no") == "yes"
expected_help = params.get("expected_help", "no") == "yes"
status_error = params.get("status_error", "no") == "yes"
disk_target = params.get("disk_target", "vdd")
disk_type = params.get("disk_type", "file")
disk_bus = params.get("disk_bus", "virtio")
img_path = params.get("sec_volume", "/var/lib/libvirt/images/luks.img")
img_format = params.get("img_format", "qcow2")
img_cap = params.get("img_cap", "1")
secret_type = params.get("secret_type", "passphrase")
secret_password = params.get("secret_password", "redhat")
extra_luks_parameter = params.get("extra_parameter")
secret_value_file = "/tmp/secret_value"
secret_file = "/tmp/secret.xml"
vm_name = params.get("main_vm")
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
virt_qemu_run = libvirt_embedded_qemu.EmbeddedQemuSession(
logging_handler=_logger,
)
try:
if expected_secret:
libvirt.create_local_disk(disk_type="file", extra=extra_luks_parameter,
path=img_path, size=int(img_cap), disk_format=img_format)
utils_secret.clean_up_secrets()
sec_params = {"sec_usage": "volume",
"sec_volume": img_path,
"sec_desc": "Secret for volume."
}
sec_uuid = libvirt.create_secret(sec_params)
if sec_uuid:
try:
virsh.secret_dumpxml(sec_uuid, to_file=secret_file)
except process.CmdError as e:
test.error(str(e))
process.run("echo -n %s > %s" % (secret_password, secret_value_file), shell=True)
vmxml = add_luks_disk(secret_type, sec_uuid)
if not no_valuefile:
arg_str += ' -s %s,%s' % (secret_file, secret_value_file)
else:
arg_str += ' -s %s' % secret_file
if expected_root_dir:
arg_str += ' -r %s' % (root_dir)
if not expected_help:
arg_str += ' %s' % (vmxml.xml)
logging.debug("Start virt-qemu-run process with options: %s", arg_str)
virt_qemu_run.start(arg_str=arg_str, wait_for_working="yes")
if expected_pattern:
if not utils_misc.wait_for(lambda: _check_log(), 60, 10):
test.fail('Expected output %s not found in log: \n%s' %
(expected_pattern, '\n'.join(log)))
if log:
logging.debug("virt-qemu-run log:")
for line in log:
logging.debug(line)
if not expected_help and not status_error:
if expected_pattern != "domain type":
expected_pattern = "guest running"
if not utils_misc.wait_for(lambda: _check_log(), 60, 20):
test.fail("Start qemu process unexpected failed")
finally:
virt_qemu_run.tail.sendcontrol('c')
if not utils_misc.wait_for(lambda: _confirm_terminate, 60, 10):
test.fail("process did not exit successfully")
virt_qemu_run.exit()
process.run('pkill -9 qemu-kvm', ignore_status=True, shell=True)
utils_secret.clean_up_secrets()
if os.path.exists(secret_value_file):
os.remove(secret_value_file)
if os.path.exists(secret_file):
os.remove(secret_file)
if os.path.exists(img_path):
os.remove(img_path)
if os.path.exists(root_dir):
shutil.rmtree(root_dir, ignore_errors=False)
def run(test, params, env):
"""
Test for virt-xml-validate
"""
# Get the full path of virt-xml-validate command.
try:
VIRT_XML_VALIDATE = astring.to_text(
process.system_output("which virt-xml-validate", shell=True))
except ValueError:
test.cancel("Not find virt-xml-validate command on host.")
vm_name = params.get("main_vm", "avocado-vt-vm1")
net_name = params.get("net_dumpxml_name", "default")
pool_name = params.get("pool_dumpxml_name", "default")
schema = params.get("schema", "domain")
output = params.get("output_file", "output")
output_path = os.path.join(data_dir.get_tmp_dir(), output)
secret_volume = params.get("secret_volume", None)
valid_schemas = [
'domain', 'domainsnapshot', 'network', 'storagepool', 'storagevol',
'nodedev', 'capability', 'nwfilter', 'secret', 'interface'
]
if schema not in valid_schemas:
test.fail("invalid %s specified" % schema)
# If storage volume doesn't exist then create it
if secret_volume and not os.path.isfile(secret_volume):
process.run("dd if=/dev/zero of=%s bs=1 count=1 seek=1M" %
secret_volume,
shell=True)
virsh_dargs = {'ignore_status': True, 'debug': True}
if schema == "domainsnapshot":
domainsnapshot_validate(test, vm_name, file=output_path, **virsh_dargs)
elif schema == "network":
network_validate(test, net_name, file=output_path, **virsh_dargs)
elif schema == "storagepool":
storagepool_validate(test, pool_name, file=output_path, **virsh_dargs)
elif schema == "storagevol":
storagevol_validate(test, pool_name, file=output_path, **virsh_dargs)
elif schema == "nodedev":
nodedev_validate(file=output_path, **virsh_dargs)
elif schema == "capability":
capability_validate(file=output_path, **virsh_dargs)
elif schema == "nwfilter":
nwfilter_validate(test, file=output_path, **virsh_dargs)
elif schema == "secret":
secret_validate(test, secret_volume, file=output_path, **virsh_dargs)
elif schema == "interface":
interface_validate(test, file=output_path, **virsh_dargs)
else:
# domain
virsh.dumpxml(vm_name, to_file=output_path)
try:
cmd = "%s %s %s" % (VIRT_XML_VALIDATE, output_path, schema)
cmd_result = process.run(cmd, ignore_status=True, shell=True)
if cmd_result.exit_status:
test.fail("virt-xml-validate command failed.\n"
"Detail: %s." % cmd_result)
if cmd_result.stdout_text.count("fail"):
test.fail("xml fails to validate\n" "Detail: %s." % cmd_result)
finally:
utils_secret.clean_up_secrets()
if secret_volume and os.path.isfile(secret_volume):
os.remove(secret_volume)
