def define_start_pool(pool_name, pool_type, pool_target, **kwargs):
"""
To define a pool
"""
if not os.path.isdir(pool_target):
os.makedirs(pool_target)
result = utlv.define_pool(pool_name, pool_type, pool_target,
cleanup_env, **kwargs)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-define-as"
" failed:\n%s" % result.stderr.strip())
else:
logging.debug("%s type pool: %s defined successfully",
pool_type, pool_name)
sp = libvirt_storage.StoragePool()
if not sp.start_pool(pool_name):
raise error.TestFail("Start pool %s failed." % pool_name)
return True
def define_start_pool(pool_name, pool_type, pool_target):
"""
To define a pool
"""
if 'dir' in pool_type:
if not os.path.isdir(pool_target):
os.makedirs(pool_target)
result = utlv.define_pool(pool_name, pool_type, pool_target)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-define-as"
" failed:\n%s" % result.stderr.strip())
else:
logging.debug("%s type pool: %s defined successfully",
pool_type, pool_name)
sp = libvirt_storage.StoragePool()
if not sp.start_pool(pool_name):
raise error.TestFail("Start pool %s failed." % pool_name)
else:
raise error.TestNAError("pool type %s has not yet been"
" supported in the test" % pool_type)
return True
def define_start_pool(pool_name, pool_type, pool_target):
"""
To define a pool
"""
if 'dir' in pool_type:
if not os.path.isdir(pool_target):
os.makedirs(pool_target)
result = utlv.define_pool(pool_name, pool_type, pool_target)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-define-as"
" failed:\n%s" % result.stderr.strip())
else:
logging.debug("%s type pool: %s defined successfully",
pool_type, pool_name)
sp = libvirt_storage.StoragePool()
if not sp.start_pool(pool_name):
raise error.TestFail("Start pool %s failed." % pool_name)
else:
raise error.TestNAError("pool type %s has not yet been"
" supported in the test" % pool_type)
return True
def run(test, params, env):
"""
Test the virsh pool commands with acl, initiate a pool then do
following operations.
(1) Undefine a given type pool
(2) Define the pool from xml
(3) Build given type pool
(4) Start pool
(5) Destroy pool
(6) Refresh pool after start it
(7) Run vol-list with the pool
(9) Delete pool
For negative cases, redo failed step to make the case run continue.
Run cleanup at last restore env.
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
# The file for dumped pool xml
pool_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(test.tmpdir, pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
vg_name = pool_name
vol_path = os.path.join(pool_target, vol_name)
define_acl = "yes" == params.get("define_acl", "no")
undefine_acl = "yes" == params.get("undefine_acl", "no")
start_acl = "yes" == params.get("start_acl", "no")
destroy_acl = "yes" == params.get("destroy_acl", "no")
build_acl = "yes" == params.get("build_acl", "no")
delete_acl = "yes" == params.get("delete_acl", "no")
refresh_acl = "yes" == params.get("refresh_acl", "no")
vol_list_acl = "yes" == params.get("vol_list_acl", "no")
list_dumpxml_acl = "yes" == params.get("list_dumpxml_acl", "no")
src_pool_error = "yes" == params.get("src_pool_error", "no")
define_error = "yes" == params.get("define_error", "no")
undefine_error = "yes" == params.get("undefine_error", "no")
start_error = "yes" == params.get("start_error", "no")
destroy_error = "yes" == params.get("destroy_error", "no")
build_error = "yes" == params.get("build_error", "no")
delete_error = "yes" == params.get("delete_error", "no")
refresh_error = "yes" == params.get("refresh_error", "no")
vol_list_error = "yes" == params.get("vol_list_error", "no")
# Clean up flags:
# cleanup_env[0] for nfs, cleanup_env[1] for iscsi, cleanup_env[2] for lvm
# cleanup_env[3] for selinux backup status, cleanup_env[4] for gluster
cleanup_env = [False, False, False, "", False]
# libvirt acl related params
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current"
" libvirt version.")
acl_dargs = {
'uri': uri,
'unprivileged_user': unprivileged_user,
'debug': True
}
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
if list_dumpxml_acl:
result = virsh.pool_list(option, **acl_dargs)
else:
result = virsh.pool_list(option, ignore_status=True)
utlv.check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)[\ +\n]",
str(result.stdout))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
raise error.TestFail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
raise error.TestFail("Expect pool '%s' doesn't exist." % pool_name)
# Run Testcase
kwargs = {'source_format': params.get('pool_source_format', 'ext4')}
try:
_pool = libvirt_storage.StoragePool()
# Init a pool for test
result = utlv.define_pool(pool_name, pool_type, pool_target,
cleanup_env, **kwargs)
utlv.check_exit_status(result, src_pool_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if list_dumpxml_acl:
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml, **acl_dargs)
else:
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Step (1)
# Undefine pool
if undefine_acl:
result = virsh.pool_undefine(pool_name, **acl_dargs)
else:
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result, undefine_error)
if undefine_error:
check_pool_list(pool_name, "--all", False)
# Redo under negative case to keep case continue
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
else:
check_pool_list(pool_name, "--all", True)
# Step (2)
# Define pool from XML file
if define_acl:
result = virsh.pool_define(pool_xml, **acl_dargs)
else:
result = virsh.pool_define(pool_xml)
utlv.check_exit_status(result, define_error)
if define_error:
# Redo under negative case to keep case continue
result = virsh.pool_define(pool_xml)
utlv.check_exit_status(result)
# Step (3)
# '--overwrite/--no-overwrite' just for fs/disk/logiacl type pool
# disk/fs pool: as prepare step already make label and create filesystem
# for the disk, use '--overwrite' is necessary
# logical_pool: build pool will fail if VG already exist, BZ#1373711
if pool_type != "logical":
option = ''
if pool_type in ['disk', 'fs']:
option = '--overwrite'
result = virsh.pool_build(pool_name, option, ignore_status=True)
utlv.check_exit_status(result)
if build_acl:
result = virsh.pool_build(pool_name, option, **acl_dargs)
else:
result = virsh.pool_build(pool_name,
option,
ignore_status=True)
utlv.check_exit_status(result, build_error)
if build_error:
# Redo under negative case to keep case continue
result = virsh.pool_build(pool_name, option, ignore_status=True)
utlv.check_exit_status(result)
# For iSCSI pool, we need discover targets before start the pool
if pool_type == 'iscsi':
cmd = 'iscsiadm -m discovery -t sendtargets -p 127.0.0.1'
process.run(cmd, shell=True)
# Step (4)
# Pool start
if start_acl:
result = virsh.pool_start(pool_name, **acl_dargs)
else:
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result, start_error)
if start_error:
# Redo under negative case to keep case continue
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (5)
# Pool destroy
if destroy_acl:
result = virsh.pool_destroy(pool_name, **acl_dargs)
else:
result = virsh.pool_destroy(pool_name)
if result:
if destroy_error:
raise error.TestFail("Expect fail, but run successfully.")
else:
if not destroy_error:
raise error.TestFail("Pool %s destroy failed, not expected." %
pool_name)
else:
# Redo under negative case to keep case continue
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (6)
# Pool refresh for 'dir' type pool
# Pool start
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
if pool_type == "dir":
os.mknod(vol_path)
if refresh_acl:
result = virsh.pool_refresh(pool_name, **acl_dargs)
else:
result = virsh.pool_refresh(pool_name)
utlv.check_exit_status(result, refresh_error)
# Step (7)
# Pool vol-list
if vol_list_acl:
result = virsh.vol_list(pool_name, **acl_dargs)
else:
result = virsh.vol_list(pool_name)
utlv.check_exit_status(result, vol_list_error)
# Step (8)
# Pool delete for 'dir' type pool
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
if pool_type == "dir":
if os.path.exists(vol_path):
os.remove(vol_path)
if delete_acl:
result = virsh.pool_delete(pool_name, **acl_dargs)
else:
result = virsh.pool_delete(pool_name, ignore_status=True)
utlv.check_exit_status(result, delete_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if not delete_error:
if os.path.exists(pool_target):
raise error.TestFail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
if os.path.exists(pool_xml):
os.remove(pool_xml)
if not _pool.delete_pool(pool_name):
logging.error("Can't delete pool: %s", pool_name)
if cleanup_env[2]:
cmd = "pvs |grep %s |awk '{print $1}'" % vg_name
pv_name = process.system_output(cmd, shell=True)
lv_utils.vg_remove(vg_name)
process.run("pvremove %s" % pv_name, shell=True)
if cleanup_env[1]:
utlv.setup_or_cleanup_iscsi(False)
if cleanup_env[0]:
utlv.setup_or_cleanup_nfs(False, restore_selinux=cleanup_env[3])
def run(test, params, env):
"""
Test the virsh pool commands with acl, initiate a pool then do
following operations.
(1) Undefine a given type pool
(2) Define the pool from xml
(3) Build given type pool
(4) Start pool
(5) Destroy pool
(6) Refresh pool after start it
(7) Run vol-list with the pool
(9) Delete pool
For negative cases, redo failed step to make the case run continue.
Run cleanup at last restore env.
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
# The file for dumped pool xml
pool_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(test.tmpdir, pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
vg_name = pool_name
vol_path = os.path.join(pool_target, vol_name)
define_acl = "yes" == params.get("define_acl", "no")
undefine_acl = "yes" == params.get("undefine_acl", "no")
start_acl = "yes" == params.get("start_acl", "no")
destroy_acl = "yes" == params.get("destroy_acl", "no")
build_acl = "yes" == params.get("build_acl", "no")
delete_acl = "yes" == params.get("delete_acl", "no")
refresh_acl = "yes" == params.get("refresh_acl", "no")
vol_list_acl = "yes" == params.get("vol_list_acl", "no")
list_dumpxml_acl = "yes" == params.get("list_dumpxml_acl", "no")
src_pool_error = "yes" == params.get("src_pool_error", "no")
define_error = "yes" == params.get("define_error", "no")
undefine_error = "yes" == params.get("undefine_error", "no")
start_error = "yes" == params.get("start_error", "no")
destroy_error = "yes" == params.get("destroy_error", "no")
build_error = "yes" == params.get("build_error", "no")
delete_error = "yes" == params.get("delete_error", "no")
refresh_error = "yes" == params.get("refresh_error", "no")
vol_list_error = "yes" == params.get("vol_list_error", "no")
# Clean up flags:
# cleanup_env[0] for nfs, cleanup_env[1] for iscsi, cleanup_env[2] for lvm
# cleanup_env[3] for selinux backup status, cleanup_env[4] for gluster
cleanup_env = [False, False, False, "", False]
# libvirt acl related params
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current"
" libvirt version.")
acl_dargs = {'uri': uri, 'unprivileged_user': unprivileged_user,
'debug': True}
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
if list_dumpxml_acl:
result = virsh.pool_list(option, **acl_dargs)
else:
result = virsh.pool_list(option, ignore_status=True)
utlv.check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)[\ +\n]",
str(result.stdout))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
raise error.TestFail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
raise error.TestFail("Expect pool '%s' doesn't exist." % pool_name)
# Run Testcase
try:
_pool = libvirt_storage.StoragePool()
# Init a pool for test
result = utlv.define_pool(pool_name, pool_type, pool_target,
cleanup_env)
utlv.check_exit_status(result, src_pool_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if list_dumpxml_acl:
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml, **acl_dargs)
else:
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Step (1)
# Undefine pool
if undefine_acl:
result = virsh.pool_undefine(pool_name, **acl_dargs)
else:
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result, undefine_error)
if undefine_error:
check_pool_list(pool_name, "--all", False)
# Redo under negative case to keep case continue
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
else:
check_pool_list(pool_name, "--all", True)
# Step (2)
# Define pool from XML file
if define_acl:
result = virsh.pool_define(pool_xml, **acl_dargs)
else:
result = virsh.pool_define(pool_xml)
utlv.check_exit_status(result, define_error)
if define_error:
# Redo under negative case to keep case continue
result = virsh.pool_define(pool_xml)
utlv.check_exit_status(result)
# Step (3)
# Buid pool, this step may fail for 'disk' and 'logical' types pool
if pool_type not in ["disk", "logical"]:
option = ""
# Options --overwrite and --no-overwrite can only be used to
# build a filesystem pool, but it will fail for now
# if pool_type == "fs":
# option = '--overwrite'
if build_acl:
result = virsh.pool_build(pool_name, option, **acl_dargs)
else:
result = virsh.pool_build(pool_name, option,
ignore_status=True)
utlv.check_exit_status(result, build_error)
if build_error:
# Redo under negative case to keep case continue
result = virsh.pool_build(pool_name, option,
ignore_status=True)
utlv.check_exit_status(result)
# For iSCSI pool, we need discover targets before start the pool
if pool_type == 'iscsi':
cmd = 'iscsiadm -m discovery -t sendtargets -p 127.0.0.1'
process.run(cmd, shell=True)
# Step (4)
# Pool start
if start_acl:
result = virsh.pool_start(pool_name, **acl_dargs)
else:
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result, start_error)
if start_error:
# Redo under negative case to keep case continue
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (5)
# Pool destroy
if destroy_acl:
result = virsh.pool_destroy(pool_name, **acl_dargs)
else:
result = virsh.pool_destroy(pool_name)
if result:
if destroy_error:
raise error.TestFail("Expect fail, but run successfully.")
else:
if not destroy_error:
raise error.TestFail("Pool %s destroy failed, not expected."
% pool_name)
else:
# Redo under negative case to keep case continue
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (6)
# Pool refresh for 'dir' type pool
# Pool start
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
if pool_type == "dir":
os.mknod(vol_path)
if refresh_acl:
result = virsh.pool_refresh(pool_name, **acl_dargs)
else:
result = virsh.pool_refresh(pool_name)
utlv.check_exit_status(result, refresh_error)
# Step (7)
# Pool vol-list
if vol_list_acl:
result = virsh.vol_list(pool_name, **acl_dargs)
else:
result = virsh.vol_list(pool_name)
utlv.check_exit_status(result, vol_list_error)
# Step (8)
# Pool delete for 'dir' type pool
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
if pool_type == "dir":
if os.path.exists(vol_path):
os.remove(vol_path)
if delete_acl:
result = virsh.pool_delete(pool_name, **acl_dargs)
else:
result = virsh.pool_delete(pool_name, ignore_status=True)
utlv.check_exit_status(result, delete_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if not delete_error:
if os.path.exists(pool_target):
raise error.TestFail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
if os.path.exists(pool_xml):
os.remove(pool_xml)
if not _pool.delete_pool(pool_name):
logging.error("Can't delete pool: %s", pool_name)
if cleanup_env[2]:
cmd = "pvs |grep %s |awk '{print $1}'" % vg_name
pv_name = process.system_output(cmd, shell=True)
lv_utils.vg_remove(vg_name)
process.run("pvremove %s" % pv_name, shell=True)
if cleanup_env[1]:
utlv.setup_or_cleanup_iscsi(False)
if cleanup_env[0]:
utlv.setup_or_cleanup_nfs(
False, restore_selinux=cleanup_env[3])