def restore(self, name):
pool = name
name = pool['name']
pools = self.current_state
if name in pools:
self.remove(pools[name])
pool_file = tempfile.NamedTemporaryFile(delete=False)
fname = pool_file.name
pool_file.writelines(pool['inactive xml'])
pool_file.close()
try:
if pool['persistent'] == 'yes':
res = virsh.pool_define(fname)
if res.exit_status:
raise Exception(str(res))
if pool['state'] == 'running':
res = virsh.pool_start(name)
if res.exit_status:
raise Exception(str(res))
else:
res = virsh.pool_create(fname)
if res.exit_status:
raise Exception(str(res))
except Exception, e:
raise e
def create_pool(p_name, p_type, p_target):
"""
Define and start a pool.
:param p_name. Pool name.
:param p_type. Pool type.
:param p_target. Pool target path.
"""
p_xml = pool_xml.PoolXML(pool_type=p_type)
p_xml.name = p_name
p_xml.target_path = p_target
if not os.path.exists(p_target):
os.mkdir(p_target)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_pool(p_name, p_type, p_target):
"""
Define and start a pool.
:param p_name. Pool name.
:param p_type. Pool type.
:param p_target. Pool target path.
"""
p_xml = pool_xml.PoolXML(pool_type=p_type)
p_xml.name = p_name
p_xml.target_path = p_target
if not os.path.exists(p_target):
os.mkdir(p_target)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
def define_start_pool(pool_name, pool_type, pool_target):
"""
To define a pool
"""
if 'dir' in pool_type:
if not os.path.isdir(pool_target):
os.makedirs(pool_target)
result = virsh.pool_define_as(pool_name, pool_type, pool_target)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-define-as"
" failed:\n%s" % result.stderr.strip())
else:
logging.debug("%s type pool: %s defined successfully",
pool_type, pool_name)
result = virsh.pool_start(pool_name, ignore_status=True)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-start failed:\n%s" %
result.stderr)
else:
logging.debug("Pool: %s successfully started", pool_name)
else:
raise error.TestNAError("pool type %s has not yet been"
" supported in the test" % pool_type)
return True
def define_start_pool(pool_name, pool_type, pool_target):
"""
To define a pool
"""
if 'dir' in pool_type:
if not os.path.isdir(pool_target):
os.makedirs(pool_target)
result = virsh.pool_define_as(pool_name, pool_type, pool_target)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-define-as"
" failed:\n%s" % result.stderr.strip())
else:
logging.debug("%s type pool: %s defined successfully"
, pool_type, pool_name)
result = virsh.pool_start(pool_name, ignore_status=True)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-start failed:\n%s" %
result.stderr)
else:
logging.debug("Pool: %s successfully started", pool_name)
else:
raise error.TestNAError("pool type %s has not yet been"
" supported in the test" % pool_type)
return True
def run(test, params, env):
"""
Test the virsh pool commands
(1) Define a given type pool
(2) List pool with '--inactive --type' options
(3) Dumpxml for the pool
(4) Undefine the pool
(5) Define pool by using the XML file in step (3)
(6) Build the pool(except 'disk' type pool
For 'fs' type pool, cover --overwrite and --no-overwrite options
(7) Start the pool
(8) List pool with '--persistent --type' options
(9) Mark pool autostart
(10) List pool with '--autostart --type' options
(11) Restart libvirtd and list pool with '--autostart --persistent' options
(12) Destroy the pool
(13) Unmark pool autostart
(14) Repeat step (11)
(15) Start the pool
(16) Get pool info
(17) Get pool uuid by name
(18) Get pool name by uuid
(19) Refresh the pool
For 'dir' type pool, touch a file under target path and refresh again
to make the new file show in vol-list.
(20) Check pool 'Capacity', 'Allocation' and 'Available'
Create a over size vol in pool(expect fail), then check these values
(21) Undefine the pool, and this should fail as pool is still active
(22) Destroy the pool
(23) Delete pool for 'dir' type pool. After the command, the pool object
will still exist but target path will be deleted
(24) Undefine the pool
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
source_format = params.get("source_format", "")
source_name = params.get("pool_source_name", "gluster-vol1")
source_path = params.get("pool_source_path", "/")
# The file for dumped pool xml
pool_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(test.tmpdir, pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
status_error = "yes" == params.get("status_error", "no")
vol_path = os.path.join(pool_target, vol_name)
ip_protocal = params.get('ip_protocal', 'ipv4')
if not libvirt_version.version_compare(1, 0, 0):
if pool_type == "gluster":
raise error.TestNAError("Gluster pool is not supported in current"
" libvirt version.")
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
result = virsh.pool_list(option, ignore_status=True)
utlv.check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)[\ +\n]",
str(result.stdout))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
raise error.TestFail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
raise error.TestFail("Expect pool '%s' doesn't exist." % pool_name)
def check_vol_list(vol_name, pool_name):
"""
Check volume from the list
:param vol_name: Name of the volume
:param pool_name: Name of the pool
"""
found = False
# Get the volume list stored in a variable
result = virsh.vol_list(pool_name, ignore_status=True)
utlv.check_exit_status(result)
output = re.findall(r"(\S+)\ +(\S+)[\ +\n]", str(result.stdout))
for item in output:
if vol_name in item[0]:
found = True
break
if found:
logging.debug("Find volume '%s' in pool '%s'.", vol_name,
pool_name)
else:
raise error.TestFail("Not find volume '%s' in pool '%s'." %
(vol_name, pool_name))
def is_in_range(actual, expected, error_percent):
deviation = 100 - (100 * (float(actual) / float(expected)))
logging.debug("Deviation: %0.2f%%", float(deviation))
return float(deviation) <= float(error_percent)
def check_pool_info(pool_info, check_point, value):
"""
Check the pool name, uuid, etc.
:param pool_info: A dict include pool's information
:param key: Key of pool info dict, available value: Name, UUID, State
Persistent, Autostart, Capacity, Allocation, Available
:param value: Expect value of pool_info[key]
"""
if pool_info is None:
raise error.TestFail("Pool info dictionary is needed.")
val_tup = ('Capacity', 'Allocation', 'Available')
if check_point in val_tup and float(value.split()[0]):
# As from bytes to GiB, could cause deviation, and it should not
# exceed 1 percent.
if is_in_range(float(pool_info[check_point].split()[0]),
float(value.split()[0]), 1):
logging.debug("Pool '%s' is '%s'.", check_point, value)
else:
raise error.TestFail("Pool '%s' isn't '%s'." %
(check_point, value))
else:
if pool_info[check_point] == value:
logging.debug("Pool '%s' is '%s'.", check_point, value)
else:
raise error.TestFail("Pool '%s' isn't '%s'." %
(check_point, value))
# Stop multipathd to avoid start pool fail(For fs like pool, the new add
# disk may in use by device-mapper, so start pool will report disk already
# mounted error).
multipathd = service.Factory.create_service("multipathd")
multipathd_status = multipathd.status()
if multipathd_status:
multipathd.stop()
# Run Testcase
pvt = utlv.PoolVolumeTest(test, params)
emulated_image = "emulated-image"
kwargs = {
'image_size': '1G',
'pre_disk_vol': ['1M'],
'source_name': source_name,
'source_path': source_path,
'source_format': source_format,
'persistent': True,
'ip_protocal': ip_protocal
}
try:
_pool = libvirt_storage.StoragePool()
# Step (1)
# Pool define
pvt.pre_pool(pool_name, pool_type, pool_target, emulated_image,
**kwargs)
# Step (2)
# Pool list
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (3)
# Pool dumpxml
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Step (4)
# Undefine pool
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
# Step (5)
# Define pool from XML file
result = virsh.pool_define(pool_xml)
utlv.check_exit_status(result, status_error)
# Step (6)
# Buid pool, this step may fail for 'disk' and 'logical' types pool
if pool_type not in ["disk", "logical"]:
option = ""
# Options --overwrite and --no-overwrite can only be used to
# build a filesystem pool, but it will fail for now
# if pool_type == "fs":
# option = '--overwrite'
result = virsh.pool_build(pool_name, option, ignore_status=True)
utlv.check_exit_status(result)
# Step (7)
# Pool start
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
# Step (8)
# Pool list
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (9)
# Pool autostart
result = virsh.pool_autostart(pool_name, ignore_status=True)
utlv.check_exit_status(result)
# Step (10)
# Pool list
option = "--autostart --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (11)
# Restart libvirtd and check the autostart pool
utils_libvirtd.libvirtd_restart()
option = "--autostart --persistent"
check_pool_list(pool_name, option)
# Step (12)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (13)
# Pool autostart disable
result = virsh.pool_autostart(pool_name,
"--disable",
ignore_status=True)
utlv.check_exit_status(result)
# Step (14)
# Repeat step (11)
utils_libvirtd.libvirtd_restart()
option = "--autostart"
check_pool_list(pool_name, option, True)
# Step (15)
# Pool start
# When libvirtd starts up, it'll check to see if any of the storage
# pools have been activated externally. If so, then it'll mark the
# pool as active. This is independent of autostart.
# So a directory based storage pool is thus pretty much always active,
# and so as the SCSI pool.
if pool_type not in ["dir", 'scsi']:
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
# Step (16)
# Pool info
pool_info = _pool.pool_info(pool_name)
logging.debug("Pool '%s' info:\n%s", pool_name, pool_info)
# Step (17)
# Pool UUID
result = virsh.pool_uuid(pool_info["Name"], ignore_status=True)
utlv.check_exit_status(result)
check_pool_info(pool_info, "UUID", result.stdout.strip())
# Step (18)
# Pool Name
result = virsh.pool_name(pool_info["UUID"], ignore_status=True)
utlv.check_exit_status(result)
check_pool_info(pool_info, "Name", result.stdout.strip())
# Step (19)
# Pool refresh for 'dir' type pool
if pool_type == "dir":
os.mknod(vol_path)
result = virsh.pool_refresh(pool_name)
utlv.check_exit_status(result)
check_vol_list(vol_name, pool_name)
# Step (20)
# Create an over size vol in pool(expect fail), then check pool:
# 'Capacity', 'Allocation' and 'Available'
# For NFS type pool, there's a bug(BZ#1077068) about allocate volume,
# and glusterfs pool not support create volume, so not test them
if pool_type != "netfs":
vol_capacity = "10000G"
vol_allocation = "10000G"
result = virsh.vol_create_as("oversize_vol", pool_name,
vol_capacity, vol_allocation, "raw")
utlv.check_exit_status(result, True)
new_info = _pool.pool_info(pool_name)
check_pool_info(pool_info, "Capacity", new_info['Capacity'])
check_pool_info(pool_info, "Allocation", new_info['Allocation'])
check_pool_info(pool_info, "Available", new_info['Available'])
# Step (21)
# Undefine pool, this should fail as the pool is active
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result, expect_error=True)
check_pool_list(pool_name, "", False)
# Step (22)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (23)
# Pool delete for 'dir' type pool
if pool_type == "dir":
for f in os.listdir(pool_target):
os.remove(os.path.join(pool_target, f))
result = virsh.pool_delete(pool_name, ignore_status=True)
utlv.check_exit_status(result)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if os.path.exists(pool_target):
raise error.TestFail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result, True)
# Step (24)
# Pool undefine
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
try:
pvt.cleanup_pool(pool_name, pool_type, pool_target, emulated_image,
**kwargs)
except error.TestFail, detail:
logging.error(str(detail))
if multipathd_status:
multipathd.start()
if os.path.exists(pool_xml):
os.remove(pool_xml)
def run(test, params, env):
"""
Test pool command:virsh pool_autostart
1) Define a given type pool
2) Mark pool as autostart
3) Restart libvirtd and check pool
4) Destroy the pool
5) Unmark pool as autostart
6) Repeate step(3)
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
source_format = params.get("source_format", "")
source_name = params.get("pool_source_name", "gluster-vol1")
source_path = params.get("pool_source_path", "/")
ip_protocal = params.get("ip_protocal", "ipv4")
pool_ref = params.get("pool_ref", "name")
pool_uuid = params.get("pool_uuid", "")
invalid_source_path = params.get("invalid_source_path", "")
status_error = "yes" == params.get("status_error", "no")
readonly_mode = "yes" == params.get("readonly_mode", "no")
pre_def_pool = "yes" == params.get("pre_def_pool", "yes")
disk_type = params.get("disk_type", "")
vg_name = params.get("vg_name", "")
lv_name = params.get("lv_name", "")
update_policy = params.get("update_policy")
# Readonly mode
ro_flag = False
if readonly_mode:
logging.debug("Readonly mode test")
ro_flag = True
if pool_target is "":
pool_target = os.path.join(test.tmpdir, pool_target)
# The file for dumped pool xml
p_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if not libvirt_version.version_compare(1, 0, 0):
if pool_type == "gluster":
test.cancel("Gluster pool is not supported in current"
" libvirt version.")
pool_ins = libvirt_storage.StoragePool()
if pool_ins.pool_exists(pool_name):
test.fail("Pool %s already exist" % pool_name)
def check_pool(pool_name, pool_type, checkpoint,
expect_value="", expect_error=False):
"""
Check the pool after autostart it
:param pool_name: Name of the pool.
:param pool_type: Type of the pool.
:param checkpoint: Which part for checking.
:param expect_value: Expected value.
:param expect_error: Boolen value, expect command success or fail
"""
libvirt_pool = libvirt_storage.StoragePool()
virsh.pool_list(option="--all", debug=True)
if checkpoint == 'State':
actual_value = libvirt_pool.pool_state(pool_name)
if checkpoint == 'Autostart':
actual_value = libvirt_pool.pool_autostart(pool_name)
if actual_value != expect_value:
if not expect_error:
if checkpoint == 'State' and pool_type in ("dir", "scsi"):
error_msg = "Dir pool should be always active when libvirtd restart. "
error_msg += "See https://bugzilla.redhat.com/show_bug.cgi?id=1238610"
logging.error(error_msg)
test.fail("Pool %s isn't %s as expected" % (checkpoint, expect_value))
else:
logging.debug("Pool %s is %s as expected", checkpoint, actual_value)
def change_source_path(new_path, update_policy="set"):
n_poolxml = pool_xml.PoolXML()
n_poolxml = n_poolxml.new_from_dumpxml(pool_name)
s_xml = n_poolxml.get_source()
s_xml.device_path = new_path
if update_policy == "set":
n_poolxml.set_source(s_xml)
elif update_policy == "add":
n_poolxml.add_source("device", {"path": new_path})
else:
test.error("Unsupported policy type")
logging.debug("After change_source_path:\n%s" %
open(n_poolxml.xml).read())
return n_poolxml
# Run Testcase
pvt = utlv.PoolVolumeTest(test, params)
emulated_image = "emulated-image"
kwargs = {'image_size': '1G', 'pre_disk_vol': ['100M'],
'source_name': source_name, 'source_path': source_path,
'source_format': source_format, 'persistent': True,
'ip_protocal': ip_protocal}
pool = pool_name
clean_mount = False
new_device = None
try:
if pre_def_pool:
# Step(1)
# Pool define
pvt.pre_pool(pool_name, pool_type, pool_target, emulated_image,
**kwargs)
# Remove the partition for disk pool
# For sometimes the partition will cause pool start failed
if pool_type == "disk":
virsh.pool_build(pool_name, "--overwrite", debug=True)
# Get pool uuid:
if pool_ref == "uuid" and not pool_uuid:
pool = pool_ins.get_pool_uuid(pool_name)
# Setup logical block device
# Change pool source path
# Undefine pool
# Define pool with new xml
# Start pool
if update_policy:
new_device = utlv.setup_or_cleanup_iscsi(True)
lv_utils.vg_create(vg_name, new_device)
new_device = utlv.create_local_disk(disk_type, size="0.5",
vgname=vg_name, lvname=lv_name)
new_path = new_device
if invalid_source_path:
new_path = invalid_source_path
if pool_type == "fs":
utlv.mkfs(new_device, source_format)
n_poolxml = change_source_path(new_path, update_policy)
p_xml = n_poolxml.xml
if not virsh.pool_undefine(pool_name):
test.fail("Undefine pool %s failed" % pool_name)
if not virsh.pool_define(p_xml):
test.fail("Define pool %s from %s failed" % (pool_name, p_xml))
logging.debug("Start pool %s" % pool_name)
result = virsh.pool_start(pool_name, ignore_status=True, debug=True)
utlv.check_exit_status(result, status_error)
# Mount a valid fs to pool target
if pool_type == "fs":
source_list = []
mnt_cmd = ""
pool_target = n_poolxml.target_path
if invalid_source_path:
source_list.append(new_device)
else:
s_devices = n_poolxml.xmltreefile.findall("//source/device")
for dev in s_devices:
source_list.append(dev.get('path'))
try:
for src in source_list:
mnt_cmd = "mount %s %s" % (src, pool_target)
if not process.system(mnt_cmd, shell=True):
clean_mount = True
except process.CmdError:
test.error("Failed to run %s" % mnt_cmd)
# Step(2)
# Pool autostart
logging.debug("Try to mark pool %s as autostart" % pool_name)
result = virsh.pool_autostart(pool, readonly=ro_flag,
ignore_status=True, debug=True)
if not pre_def_pool:
utlv.check_exit_status(result, status_error)
if not result.exit_status:
check_pool(pool_name, pool_type, checkpoint='Autostart',
expect_value="yes", expect_error=status_error)
# Step(3)
# Restart libvirtd and check pool status
logging.info("Try to restart libvirtd")
libvirtd = utils_libvirtd.Libvirtd()
libvirtd.restart()
check_pool(pool_name, pool_type, checkpoint="State",
expect_value="active", expect_error=status_error)
# Step(4)
# Pool destroy
if pool_ins.is_pool_active(pool_name):
virsh.pool_destroy(pool_name)
logging.debug("Pool %s destroyed" % pool_name)
# Step(5)
# Pool autostart disable
logging.debug("Try to unmark pool %s as autostart" % pool_name)
result = virsh.pool_autostart(pool, extra="--disable", debug=True,
ignore_status=True)
if not pre_def_pool:
utlv.check_exit_status(result, status_error)
if not result.exit_status:
check_pool(pool_name, pool_type, checkpoint='Autostart',
expect_value="no", expect_error=status_error)
# Repeat step (3)
logging.debug("Try to restart libvirtd")
libvirtd = utils_libvirtd.Libvirtd()
libvirtd.restart()
check_pool(pool_name, pool_type, checkpoint='State',
expect_value="inactive", expect_error=status_error)
finally:
# Clean up
logging.debug("Try to clean up env")
try:
if clean_mount is True:
for src in source_list:
process.system("umount %s" % pool_target)
if pre_def_pool:
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image, **kwargs)
if new_device:
utlv.delete_local_disk(disk_type, vgname=vg_name, lvname=lv_name)
lv_utils.vg_remove(vg_name)
utlv.setup_or_cleanup_iscsi(False)
if os.path.exists(p_xml):
os.remove(p_xml)
except test.fail as details:
libvirtd = utils_libvirtd.Libvirtd()
libvirtd.restart()
logging.error(str(details))
def run(test, params, env):
"""
Test pool command:virsh pool_autostart
1) Define a given type pool
2) Mark pool as autostart
3) Restart libvirtd and check pool
4) Destroy the pool
5) Unmark pool as autostart
6) Repeate step(3)
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
source_format = params.get("source_format", "")
source_name = params.get("pool_source_name", "gluster-vol1")
source_path = params.get("pool_source_path", "/")
ip_protocal = params.get("ip_protocal", "ipv4")
pool_ref = params.get("pool_ref", "name")
pool_uuid = params.get("pool_uuid", "")
invalid_source_path = params.get("invalid_source_path", "")
status_error = "yes" == params.get("status_error", "no")
readonly_mode = "yes" == params.get("readonly_mode", "no")
pre_def_pool = "yes" == params.get("pre_def_pool", "yes")
disk_type = params.get("disk_type", "")
vg_name = params.get("vg_name", "")
lv_name = params.get("lv_name", "")
update_policy = params.get("update_policy")
# Readonly mode
ro_flag = False
if readonly_mode:
logging.debug("Readonly mode test")
ro_flag = True
if pool_target is "":
pool_target = os.path.join(test.tmpdir, pool_target)
# The file for dumped pool xml
p_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if not libvirt_version.version_compare(1, 0, 0):
if pool_type == "gluster":
test.cancel("Gluster pool is not supported in current"
" libvirt version.")
pool_ins = libvirt_storage.StoragePool()
if pool_ins.pool_exists(pool_name):
test.fail("Pool %s already exist" % pool_name)
def check_pool(pool_name,
pool_type,
checkpoint,
expect_value="",
expect_error=False):
"""
Check the pool after autostart it
:param pool_name: Name of the pool.
:param pool_type: Type of the pool.
:param checkpoint: Which part for checking.
:param expect_value: Expected value.
:param expect_error: Boolen value, expect command success or fail
"""
libvirt_pool = libvirt_storage.StoragePool()
virsh.pool_list(option="--all", debug=True)
if checkpoint == 'State':
actual_value = libvirt_pool.pool_state(pool_name)
if checkpoint == 'Autostart':
actual_value = libvirt_pool.pool_autostart(pool_name)
if actual_value != expect_value:
if not expect_error:
if checkpoint == 'State' and pool_type in ("dir", "scsi"):
debug_msg = "Dir pool should be always active when libvirtd restart. "
debug_msg += "See https://bugzilla.redhat.com/show_bug.cgi?id=1238610"
logging.debug(debug_msg)
else:
test.fail("Pool %s isn't %s as expected" %
(checkpoint, expect_value))
else:
logging.debug("Pool %s is %s as expected", checkpoint,
actual_value)
def change_source_path(new_path, update_policy="set"):
n_poolxml = pool_xml.PoolXML()
n_poolxml = n_poolxml.new_from_dumpxml(pool_name)
s_xml = n_poolxml.get_source()
s_xml.device_path = new_path
if update_policy == "set":
n_poolxml.set_source(s_xml)
elif update_policy == "add":
n_poolxml.add_source("device", {"path": new_path})
else:
test.error("Unsupported policy type")
logging.debug("After change_source_path:\n%s" %
open(n_poolxml.xml).read())
return n_poolxml
# Run Testcase
pvt = utlv.PoolVolumeTest(test, params)
kwargs = {
'image_size': '1G',
'pre_disk_vol': ['100M'],
'source_name': source_name,
'source_path': source_path,
'source_format': source_format,
'persistent': True,
'ip_protocal': ip_protocal,
'emulated_image': "emulated-image",
'pool_target': pool_target
}
params.update(kwargs)
pool = pool_name
clean_mount = False
new_device = None
try:
if pre_def_pool:
# Step(1)
# Pool define
pvt.pre_pool(**params)
# Remove the partition for disk pool
# For sometimes the partition will cause pool start failed
if pool_type == "disk":
virsh.pool_build(pool_name, "--overwrite", debug=True)
# Get pool uuid:
if pool_ref == "uuid" and not pool_uuid:
pool = pool_ins.get_pool_uuid(pool_name)
# Setup logical block device
# Change pool source path
# Undefine pool
# Define pool with new xml
# Start pool
if update_policy:
new_device = utlv.setup_or_cleanup_iscsi(True)
lv_utils.vg_create(vg_name, new_device)
new_device = utlv.create_local_disk(disk_type,
size="0.5",
vgname=vg_name,
lvname=lv_name)
new_path = new_device
if invalid_source_path:
new_path = invalid_source_path
if pool_type == "fs":
utlv.mkfs(new_device, source_format)
n_poolxml = change_source_path(new_path, update_policy)
p_xml = n_poolxml.xml
if not virsh.pool_undefine(pool_name):
test.fail("Undefine pool %s failed" % pool_name)
if not virsh.pool_define(p_xml):
test.fail("Define pool %s from %s failed" %
(pool_name, p_xml))
logging.debug("Start pool %s" % pool_name)
result = virsh.pool_start(pool_name,
ignore_status=True,
debug=True)
utlv.check_exit_status(result, status_error)
# Mount a valid fs to pool target
if pool_type == "fs":
source_list = []
mnt_cmd = ""
pool_target = n_poolxml.target_path
if invalid_source_path:
source_list.append(new_device)
else:
s_devices = n_poolxml.xmltreefile.findall(
"//source/device")
for dev in s_devices:
source_list.append(dev.get('path'))
try:
for src in source_list:
mnt_cmd = "mount %s %s" % (src, pool_target)
if not process.system(mnt_cmd, shell=True):
clean_mount = True
except process.CmdError:
test.error("Failed to run %s" % mnt_cmd)
# Step(2)
# Pool autostart
logging.debug("Try to mark pool %s as autostart" % pool_name)
result = virsh.pool_autostart(pool,
readonly=ro_flag,
ignore_status=True,
debug=True)
if not pre_def_pool:
utlv.check_exit_status(result, status_error)
if not result.exit_status:
check_pool(pool_name,
pool_type,
checkpoint='Autostart',
expect_value="yes",
expect_error=status_error)
# Step(3)
# Restart libvirtd and check pool status
logging.info("Try to restart libvirtd")
libvirtd = utils_libvirtd.Libvirtd()
libvirtd.restart()
check_pool(pool_name,
pool_type,
checkpoint="State",
expect_value="active",
expect_error=status_error)
# Step(4)
# Pool destroy
if pool_ins.is_pool_active(pool_name):
virsh.pool_destroy(pool_name)
logging.debug("Pool %s destroyed" % pool_name)
# Step(5)
# Pool autostart disable
logging.debug("Try to unmark pool %s as autostart" % pool_name)
result = virsh.pool_autostart(pool,
extra="--disable",
debug=True,
ignore_status=True)
if not pre_def_pool:
utlv.check_exit_status(result, status_error)
if not result.exit_status:
check_pool(pool_name,
pool_type,
checkpoint='Autostart',
expect_value="no",
expect_error=status_error)
# Repeat step (3)
logging.debug("Try to restart libvirtd")
libvirtd = utils_libvirtd.Libvirtd()
libvirtd.restart()
check_pool(pool_name,
pool_type,
checkpoint='State',
expect_value="inactive",
expect_error=status_error)
finally:
# Clean up
logging.debug("Try to clean up env")
try:
if clean_mount is True:
for src in source_list:
process.system("umount %s" % pool_target)
if pre_def_pool:
pvt.cleanup_pool(**params)
if new_device:
utlv.delete_local_disk(disk_type,
vgname=vg_name,
lvname=lv_name)
lv_utils.vg_remove(vg_name)
utlv.setup_or_cleanup_iscsi(False)
if os.path.exists(p_xml):
os.remove(p_xml)
except exceptions.TestFail as details:
libvirtd = utils_libvirtd.Libvirtd()
libvirtd.restart()
logging.error(str(details))
emulated_image, **kwargs)
raise exceptions.TestError(
"Error occurred when prepare pool xml:\n %s" % e)
if os.path.exists(pool_xml_f):
f = open(pool_xml_f, 'r')
try:
logging.debug("Create pool from file:\n %s", f.read())
finally:
f.close()
try:
cmd_result = virsh.pool_define(pool_xml_f, ignore_status=True,
debug=True)
utlv.check_exit_status(cmd_result)
cmd_result = virsh.pool_start(pool_name)
utlv.check_exit_status(cmd_result)
utlv.check_actived_pool(pool_name)
pool_detail = libvirt_xml.PoolXML.get_pool_details(pool_name)
logging.debug("Pool detail: %s", pool_detail)
vol_list = utlv.get_vol_list(pool_name, timeout=10)
test_unit = vol_list.keys()[0]
logging.info(
"Using the first LUN unit %s to attach to a guest", test_unit)
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
session = vm.wait_for_login()
output = session.cmd_status_output('lsblk')
logging.debug("%s", output[1])
old_count = vmxml.get_disk_count(vm_name)
--adapter-parent %s --target %s"\
% (pool_name, pool_type, pool_wwnn, pool_wwpn,
online_hbas_list[0], pool_target)
cmd_status = process.system(cmd, verbose=True)
if cmd_status:
raise exceptions.TestFail("pool-create-as scsi pool failed.")
if need_pool_build == "yes":
pool_build_status = virsh.pool_build(pool_name, "--overwrite")
utlv.check_exit_status(pool_build_status)
pool_ins = libvirt_storage.StoragePool()
if not pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("define or create pool failed.")
else:
if not pool_ins.is_pool_active(pool_name):
pool_start_status = virsh.pool_start(pool_name)
utlv.check_exit_status(pool_start_status)
utlv.check_actived_pool(pool_name)
pool_detail = libvirt_xml.PoolXML.get_pool_details(pool_name)
logging.debug("Pool detail: %s", pool_detail)
# create vol if required
if need_vol_create == "yes":
vol_create_as_status = virsh.vol_create_as(volume_name,
pool_name,
volume_capacity,
allocation,
vol_format,
"",
debug=True)
utlv.check_exit_status(vol_create_as_status)
def run(test, params, env):
"""
Test the virsh pool commands with acl, initiate a pool then do
following operations.
(1) Undefine a given type pool
(2) Define the pool from xml
(3) Build given type pool
(4) Start pool
(5) Destroy pool
(6) Refresh pool after start it
(7) Run vol-list with the pool
(9) Delete pool
For negative cases, redo failed step to make the case run continue.
Run cleanup at last restore env.
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
# The file for dumped pool xml
pool_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(test.tmpdir, pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
vg_name = pool_name
vol_path = os.path.join(pool_target, vol_name)
define_acl = "yes" == params.get("define_acl", "no")
undefine_acl = "yes" == params.get("undefine_acl", "no")
start_acl = "yes" == params.get("start_acl", "no")
destroy_acl = "yes" == params.get("destroy_acl", "no")
build_acl = "yes" == params.get("build_acl", "no")
delete_acl = "yes" == params.get("delete_acl", "no")
refresh_acl = "yes" == params.get("refresh_acl", "no")
vol_list_acl = "yes" == params.get("vol_list_acl", "no")
src_pool_error = "yes" == params.get("src_pool_error", "no")
define_error = "yes" == params.get("define_error", "no")
undefine_error = "yes" == params.get("undefine_error", "no")
start_error = "yes" == params.get("start_error", "no")
destroy_error = "yes" == params.get("destroy_error", "no")
build_error = "yes" == params.get("build_error", "no")
delete_error = "yes" == params.get("delete_error", "no")
refresh_error = "yes" == params.get("refresh_error", "no")
vol_list_error = "yes" == params.get("vol_list_error", "no")
# Clean up flags:
# cleanup_env[0] for nfs, cleanup_env[1] for iscsi, cleanup_env[2] for lvm
cleanup_env = [False, False, False]
# libvirt acl related params
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current"
+ " libvirt version.")
acl_dargs = {'uri': uri, 'unprivileged_user': unprivileged_user,
'debug': True}
def check_exit_status(result, expect_error=False):
"""
Check the exit status of virsh commands.
:param result: Virsh command result object
:param expect_error: Boolean value, expect command success or fail
"""
if not expect_error:
if result.exit_status != 0:
raise error.TestFail(result.stderr)
else:
logging.debug("Command output:\n%s", result.stdout.strip())
elif expect_error and result.exit_status == 0:
raise error.TestFail("Expect fail, but run successfully.")
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
result = virsh.pool_list(option, ignore_status=True)
check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)[\ +\n]",
str(result.stdout))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
raise error.TestFail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
raise error.TestFail("Expect pool '%s' doesn't exist." % pool_name)
# Run Testcase
try:
_pool = libvirt_storage.StoragePool()
# Init a pool for test
result = utils_test.libvirt.define_pool(pool_name, pool_type,
pool_target, cleanup_env)
check_exit_status(result, src_pool_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Step (1)
# Undefine pool
if undefine_acl:
result = virsh.pool_undefine(pool_name, **acl_dargs)
else:
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result, undefine_error)
if undefine_error:
check_pool_list(pool_name, "--all", False)
# Redo under negative case to keep case continue
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result)
check_pool_list(pool_name, "--all", True)
else:
check_pool_list(pool_name, "--all", True)
# Step (2)
# Define pool from XML file
if define_acl:
result = virsh.pool_define(pool_xml, **acl_dargs)
else:
result = virsh.pool_define(pool_xml)
check_exit_status(result, define_error)
if define_error:
# Redo under negative case to keep case continue
result = virsh.pool_define(pool_xml)
check_exit_status(result)
# Step (3)
# Buid pool, this step may fail for 'disk' and 'logical' types pool
if pool_type not in ["disk", "logical"]:
option = ""
# Options --overwrite and --no-overwrite can only be used to
# build a filesystem pool, but it will fail for now
# if pool_type == "fs":
# option = '--overwrite'
if build_acl:
result = virsh.pool_build(pool_name, option, **acl_dargs)
else:
result = virsh.pool_build(pool_name, option,
ignore_status=True)
check_exit_status(result, build_error)
if build_error:
# Redo under negative case to keep case continue
result = virsh.pool_build(pool_name, option,
ignore_status=True)
check_exit_status(result)
# Step (4)
# Pool start
if start_acl:
result = virsh.pool_start(pool_name, **acl_dargs)
else:
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result, start_error)
if start_error:
# Redo under negative case to keep case continue
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result)
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (5)
# Pool destroy
if destroy_acl:
result = virsh.pool_destroy(pool_name, **acl_dargs)
else:
result = virsh.pool_destroy(pool_name)
if result:
if destroy_error:
raise error.TestFail("Expect fail, but run successfully.")
else:
if not destroy_error:
raise error.TestFail("Pool %s destroy failed, not expected."
% pool_name)
else:
# Redo under negative case to keep case continue
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (6)
# Pool refresh for 'dir' type pool
# Pool start
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result)
if pool_type == "dir":
os.mknod(vol_path)
if refresh_acl:
result = virsh.pool_refresh(pool_name, **acl_dargs)
else:
result = virsh.pool_refresh(pool_name)
check_exit_status(result, refresh_error)
# Step (7)
# Pool vol-list
if vol_list_acl:
result = virsh.vol_list(pool_name, **acl_dargs)
else:
result = virsh.vol_list(pool_name)
check_exit_status(result, vol_list_error)
# Step (8)
# Pool delete for 'dir' type pool
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
if pool_type == "dir":
if os.path.exists(vol_path):
os.remove(vol_path)
if delete_acl:
result = virsh.pool_delete(pool_name, **acl_dargs)
else:
result = virsh.pool_delete(pool_name, ignore_status=True)
check_exit_status(result, delete_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if not delete_error:
if os.path.exists(pool_target):
raise error.TestFail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
if os.path.exists(pool_xml):
os.remove(pool_xml)
if not _pool.delete_pool(pool_name):
logging.error("Can't delete pool: %s", pool_name)
if cleanup_env[2]:
cmd = "pvs |grep %s |awk '{print $1}'" % vg_name
pv_name = utils.system_output(cmd)
lv_utils.vg_remove(vg_name)
utils.run("pvremove %s" % pv_name)
if cleanup_env[1]:
utils_test.libvirt.setup_or_cleanup_iscsi(False)
if cleanup_env[0]:
utils_test.libvirt.setup_or_cleanup_nfs(False)
def run(test, params, env):
"""
Test the virsh pool commands
(1) Define a given type pool
(2) List pool with '--inactive --type' options
(3) Dumpxml for the pool
(4) Undefine the pool
(5) Define pool by using the XML file in step (3)
(6) Build the pool(except 'disk' type pool
For 'fs' type pool, cover --overwrite and --no-overwrite options
(7) Start the pool
(8) List pool with '--persistent --type' options
(9) Mark pool autostart
(10) List pool with '--autostart --type' options
(11) Restart libvirtd and list pool with '--autostart --persistent' options
(12) Destroy the pool
(13) Unmark pool autostart
(14) Repeat step (11)
(15) Start the pool
(16) Get pool info
(17) Get pool uuid by name
(18) Get pool name by uuid
(19) Refresh the pool
For 'dir' type pool, touch a file under target path and refresh again
to make the new file show in vol-list.
(20) Check pool 'Capacity', 'Allocation' and 'Available'
Create a over size vol in pool(expect fail), then check these values
(21) Undefine the pool, and this should fail as pool is still active
(22) Destroy the pool
(23) Delete pool for 'dir' type pool. After the command, the pool object
will still exist but target path will be deleted
(24) Undefine the pool
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
source_format = params.get("source_format", "")
source_name = params.get("pool_source_name", "gluster-vol1")
source_path = params.get("pool_source_path", "/")
new_pool_name = params.get("new_pool_name", "")
build_option = params.get("build_option", "")
iscsi_initiator = params.get("iscsi_initiator", "")
same_source_test = "yes" == params.get("same_source_test", "no")
customize_initiator_iqn = "yes" == params.get("customize_initiator_iqn",
"no")
# The file for dumped pool xml
poolxml = os.path.join(data_dir.get_tmp_dir(), "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(data_dir.get_tmp_dir(), pool_target)
vol_name = params.get("volume_name", "temp_vol_1")
# Use pool name as VG name
status_error = "yes" == params.get("status_error", "no")
vol_path = os.path.join(pool_target, vol_name)
ip_protocal = params.get('ip_protocal', 'ipv4')
if not libvirt_version.version_compare(1, 0, 0):
if pool_type == "gluster":
test.cancel("Gluster pool is not supported in current"
" libvirt version.")
if not libvirt_version.version_compare(4, 7, 0):
if pool_type == "iscsi-direct":
test.cancel("iSCSI-direct pool is not supported in current"
"libvirt version.")
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
result = virsh.pool_list(option, ignore_status=True)
utlv.check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)",
str(result.stdout.strip()))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
test.fail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
test.fail("Expect pool '%s' doesn't exist." % pool_name)
def check_vol_list(vol_name, pool_name):
"""
Check volume from the list
:param vol_name: Name of the volume
:param pool_name: Name of the pool
"""
found = False
# Get the volume list stored in a variable
result = virsh.vol_list(pool_name, ignore_status=True)
utlv.check_exit_status(result)
output = re.findall(r"(\S+)\ +(\S+)", str(result.stdout.strip()))
for item in output:
if vol_name in item[0]:
found = True
break
if found:
logging.debug("Find volume '%s' in pool '%s'.", vol_name,
pool_name)
else:
test.fail("Not find volume '%s' in pool '%s'." %
(vol_name, pool_name))
def is_in_range(actual, expected, error_percent):
deviation = 100 - (100 * (float(actual) / float(expected)))
logging.debug("Deviation: %0.2f%%", float(deviation))
return float(deviation) <= float(error_percent)
def check_pool_info(pool_info, check_point, value):
"""
Check the pool name, uuid, etc.
:param pool_info: A dict include pool's information
:param key: Key of pool info dict, available value: Name, UUID, State
Persistent, Autostart, Capacity, Allocation, Available
:param value: Expect value of pool_info[key]
"""
if pool_info is None:
test.fail("Pool info dictionary is needed.")
val_tup = ('Capacity', 'Allocation', 'Available')
if check_point in val_tup and float(value.split()[0]):
# As from bytes to GiB, could cause deviation, and it should not
# exceed 1 percent.
if is_in_range(float(pool_info[check_point].split()[0]),
float(value.split()[0]), 1):
logging.debug("Pool '%s' is '%s'.", check_point, value)
else:
test.fail("Pool '%s' isn't '%s'." % (check_point, value))
else:
if pool_info[check_point] == value:
logging.debug("Pool '%s' is '%s'.", check_point, value)
else:
test.fail("Pool '%s' isn't '%s'." % (check_point, value))
# Stop multipathd to avoid start pool fail(For fs like pool, the new add
# disk may in use by device-mapper, so start pool will report disk already
# mounted error).
multipathd = service.Factory.create_service("multipathd")
multipathd_status = multipathd.status()
if multipathd_status:
multipathd.stop()
# Run Testcase
pvt = utlv.PoolVolumeTest(test, params)
kwargs = {
'image_size': '1G',
'pre_disk_vol': ['100M'],
'source_name': source_name,
'source_path': source_path,
'source_format': source_format,
'persistent': True,
'ip_protocal': ip_protocal,
'emulated_image': "emulated-image",
'pool_target': pool_target,
'iscsi_initiator': iscsi_initiator
}
params.update(kwargs)
try:
_pool = libvirt_storage.StoragePool()
# Step (1)
# Pool define
pvt.pre_pool(**params)
# Step (2)
# Pool list
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (3)
# Pool dumpxml
xml = virsh.pool_dumpxml(pool_name, to_file=poolxml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Update pool name
if new_pool_name:
if "/" in new_pool_name:
new_pool_name = new_pool_name.replace("/", "\/")
logging.debug(new_pool_name)
p_xml = pool_xml.PoolXML.new_from_dumpxml(pool_name)
p_xml.name = new_pool_name
del p_xml.uuid
poolxml = p_xml.xml
logging.debug("XML after update pool name:\n%s" % p_xml)
# Update host name
if same_source_test:
s_xml = p_xml.get_source()
s_xml.host_name = "192.168.1.1"
p_xml.set_source(s_xml)
poolxml = p_xml.xml
logging.debug("XML after update host name:\n%s" % p_xml)
if customize_initiator_iqn:
initiator_iqn = params.get("initiator_iqn",
"iqn.2018-07.com.virttest:pool.target")
p_xml = pool_xml.PoolXML.new_from_dumpxml(pool_name)
s_node = p_xml.xmltreefile.find('/source')
i_node = ET.SubElement(s_node, 'initiator')
ET.SubElement(i_node, 'iqn', {'name': initiator_iqn})
p_xml.xmltreefile.write()
poolxml = p_xml.xml
logging.debug('XML after add Multi-IQN:\n%s' % p_xml)
# Step (4)
# Undefine pool
if not same_source_test:
result = virsh.pool_undefine(pool_name)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
# Step (5)
# Define pool from XML file
result = virsh.pool_define(poolxml, debug=True)
# Give error msg when exit status is not expected
if "/" in new_pool_name and not result.exit_status:
error_msg = "https://bugzilla.redhat.com/show_bug.cgi?id=639923 "
error_msg += "is helpful for tracing this bug."
logging.error(error_msg)
if "." in new_pool_name and result.exit_status:
error_msg = "https://bugzilla.redhat.com/show_bug.cgi?id=1333248 "
error_msg += "is helpful for tracing this bug."
logging.error(error_msg)
if same_source_test and not result.exit_status:
error_msg = "https://bugzilla.redhat.com/show_bug.cgi?id=1171984 "
error_msg += "is helpful for tracing this bug."
logging.error(error_msg)
utlv.check_exit_status(result, status_error)
if not result.exit_status:
# Step (6)
# Buid pool
# '--overwrite/--no-overwrite' just for fs/disk/logiacl type pool
# disk/fs pool: as prepare step already make label and create filesystem
# for the disk, use '--overwrite' is necessary
# logical_pool: build pool will fail if VG already exist, BZ#1373711
if new_pool_name:
pool_name = new_pool_name
if pool_type != "logical":
result = virsh.pool_build(pool_name,
build_option,
ignore_status=True)
utlv.check_exit_status(result)
# Step (7)
# Pool start
result = virsh.pool_start(pool_name,
debug=True,
ignore_status=True)
utlv.check_exit_status(result)
# Step (8)
# Pool list
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (9)
# Pool autostart
result = virsh.pool_autostart(pool_name, ignore_status=True)
utlv.check_exit_status(result)
# Step (10)
# Pool list
option = "--autostart --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (11)
# Restart libvirtd and check the autostart pool
utils_libvirtd.libvirtd_restart()
option = "--autostart --persistent"
check_pool_list(pool_name, option)
# Step (12)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
test.fail("Destroy pool % failed." % pool_name)
# Step (13)
# Pool autostart disable
result = virsh.pool_autostart(pool_name,
"--disable",
ignore_status=True)
utlv.check_exit_status(result)
# Step (14)
# Repeat step (11)
utils_libvirtd.libvirtd_restart()
option = "--autostart"
check_pool_list(pool_name, option, True)
# Step (15)
# Pool start
# When libvirtd starts up, it'll check to see if any of the storage
# pools have been activated externally. If so, then it'll mark the
# pool as active. This is independent of autostart.
# So a directory based storage pool is thus pretty much always active,
# and so as the SCSI pool.
if pool_type not in ["dir", 'scsi']:
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
# Step (16)
# Pool info
pool_info = _pool.pool_info(pool_name)
logging.debug("Pool '%s' info:\n%s", pool_name, pool_info)
# Step (17)
# Pool UUID
result = virsh.pool_uuid(pool_info["Name"], ignore_status=True)
utlv.check_exit_status(result)
check_pool_info(pool_info, "UUID", result.stdout.strip())
# Step (18)
# Pool Name
result = virsh.pool_name(pool_info["UUID"], ignore_status=True)
utlv.check_exit_status(result)
check_pool_info(pool_info, "Name", result.stdout.strip())
# Step (19)
# Pool refresh for 'dir' type pool
if pool_type == "dir":
os.mknod(vol_path)
result = virsh.pool_refresh(pool_name)
utlv.check_exit_status(result)
check_vol_list(vol_name, pool_name)
# Step (20)
# Create an over size vol in pool(expect fail), then check pool:
# 'Capacity', 'Allocation' and 'Available'
# For NFS type pool, there's a bug(BZ#1077068) about allocate volume,
# and glusterfs pool not support create volume, so not test them
if pool_type != "netfs":
vol_capacity = "10000G"
vol_allocation = "10000G"
result = virsh.vol_create_as("oversize_vol", pool_name,
vol_capacity, vol_allocation,
"raw")
utlv.check_exit_status(result, True)
new_info = _pool.pool_info(pool_name)
check_items = ["Capacity", "Allocation", "Available"]
for i in check_items:
check_pool_info(pool_info, i, new_info[i])
# Step (21)
# Undefine pool, this should fail as the pool is active
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result, expect_error=True)
check_pool_list(pool_name, "", False)
# Step (22)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
test.fail("Destroy pool % failed." % pool_name)
# Step (23)
# Pool delete for 'dir' type pool
if pool_type == "dir":
for f in os.listdir(pool_target):
os.remove(os.path.join(pool_target, f))
result = virsh.pool_delete(pool_name, ignore_status=True)
utlv.check_exit_status(result)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if os.path.exists(pool_target):
test.fail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_start(pool_name,
ignore_status=True)
utlv.check_exit_status(result, True)
# Step (24)
# Pool undefine
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
try:
pvt.cleanup_pool(**params)
utlv.setup_or_cleanup_iscsi(False)
except exceptions.TestFail as detail:
logging.error(str(detail))
if multipathd_status:
multipathd.start()
if os.path.exists(poolxml):
os.remove(poolxml)
def run(test, params, env):
"""
Test the virsh pool commands
(1) Define a given type pool
(2) List pool with '--inactive --type' options
(3) Dumpxml for the pool
(4) Undefine the pool
(5) Define pool by using the XML file in step (3)
(6) Build the pool(except 'disk' type pool
For 'fs' type pool, cover --overwrite and --no-overwrite options
(7) Start the pool
(8) List pool with '--persistent --type' options
(9) Mark pool autostart
(10) List pool with '--autostart --type' options
(11) Restart libvirtd and list pool with '--autostart --persistent' options
(12) Destroy the pool
(13) Unmark pool autostart
(14) Repeat step (11)
(15) Start the pool
(16) Get pool info
(17) Get pool uuid by name
(18) Get pool name by uuid
(19) Refresh the pool
For 'dir' type pool, touch a file under target path and refresh again
to make the new file show in vol-list.
(20) Check pool 'Capacity', 'Allocation' and 'Available'
Create a over size vol in pool(expect fail), then check these values
(21) Undefine the pool, and this should fail as pool is still active
(22) Destroy the pool
(23) Delete pool for 'dir' type pool. After the command, the pool object
will still exist but target path will be deleted
(24) Undefine the pool
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
source_format = params.get("source_format", "")
source_name = params.get("pool_source_name", "gluster-vol1")
source_path = params.get("pool_source_path", "/")
# The file for dumped pool xml
pool_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(test.tmpdir, pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
status_error = "yes" == params.get("status_error", "no")
vol_path = os.path.join(pool_target, vol_name)
ip_protocal = params.get("ip_protocal", "ipv4")
if not libvirt_version.version_compare(1, 0, 0):
if pool_type == "gluster":
raise error.TestNAError("Gluster pool is not supported in current" " libvirt version.")
def check_exit_status(result, expect_error=False):
"""
Check the exit status of virsh commands.
:param result: Virsh command result object
:param expect_error: Boolean value, expect command success or fail
"""
if not expect_error:
if result.exit_status != 0:
raise error.TestFail(result.stderr)
else:
logging.debug("Command output:\n%s", result.stdout.strip())
elif expect_error and result.exit_status == 0:
raise error.TestFail("Expect fail, but run successfully.")
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
result = virsh.pool_list(option, ignore_status=True)
check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)[\ +\n]", str(result.stdout))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
raise error.TestFail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
raise error.TestFail("Expect pool '%s' doesn't exist." % pool_name)
def check_vol_list(vol_name, pool_name):
"""
Check volume from the list
:param vol_name: Name of the volume
:param pool_name: Name of the pool
"""
found = False
# Get the volume list stored in a variable
result = virsh.vol_list(pool_name, ignore_status=True)
check_exit_status(result)
output = re.findall(r"(\S+)\ +(\S+)[\ +\n]", str(result.stdout))
for item in output:
if vol_name in item[0]:
found = True
break
if found:
logging.debug("Find volume '%s' in pool '%s'.", vol_name, pool_name)
else:
raise error.TestFail("Not find volume '%s' in pool '%s'." % (vol_name, pool_name))
def check_pool_info(pool_info, check_point, value):
"""
Check the pool name, uuid, etc.
:param pool_info: A dict include pool's information
:param key: Key of pool info dict, available value: Name, UUID, State
Persistent, Autostart, Capacity, Allocation, Available
:param value: Expect value of pool_info[key]
"""
if pool_info is None:
raise error.TestFail("Pool info dictionary is needed.")
if pool_info[check_point] == value:
logging.debug("Pool '%s' is '%s'.", check_point, value)
else:
raise error.TestFail("Pool '%s' isn't '%s'." % (check_point, value))
# Stop multipathd to avoid start pool fail(For fs like pool, the new add
# disk may in use by device-mapper, so start pool will report disk already
# mounted error).
multipathd = service.Factory.create_service("multipathd")
multipathd_status = multipathd.status()
if multipathd_status:
multipathd.stop()
# Run Testcase
pvt = utlv.PoolVolumeTest(test, params)
emulated_image = "emulated-image"
kwargs = {
"image_size": "1G",
"pre_disk_vol": ["1M"],
"source_name": source_name,
"source_path": source_path,
"source_format": source_format,
"persistent": True,
"ip_protocal": ip_protocal,
}
try:
_pool = libvirt_storage.StoragePool()
# Step (1)
# Pool define
pvt.pre_pool(pool_name, pool_type, pool_target, emulated_image, **kwargs)
# Step (2)
# Pool list
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (3)
# Pool dumpxml
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Step (4)
# Undefine pool
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result)
check_pool_list(pool_name, "--all", True)
# Step (5)
# Define pool from XML file
result = virsh.pool_define(pool_xml)
check_exit_status(result, status_error)
# Step (6)
# Buid pool, this step may fail for 'disk' and 'logical' types pool
if pool_type not in ["disk", "logical"]:
option = ""
# Options --overwrite and --no-overwrite can only be used to
# build a filesystem pool, but it will fail for now
# if pool_type == "fs":
# option = '--overwrite'
result = virsh.pool_build(pool_name, option, ignore_status=True)
check_exit_status(result)
# Step (7)
# Pool start
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result)
# Step (8)
# Pool list
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (9)
# Pool autostart
result = virsh.pool_autostart(pool_name, ignore_status=True)
check_exit_status(result)
# Step (10)
# Pool list
option = "--autostart --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (11)
# Restart libvirtd and check the autostart pool
utils_libvirtd.libvirtd_restart()
option = "--autostart --persistent"
check_pool_list(pool_name, option)
# Step (12)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (13)
# Pool autostart disable
result = virsh.pool_autostart(pool_name, "--disable", ignore_status=True)
check_exit_status(result)
# Step (14)
# Repeat step (11)
utils_libvirtd.libvirtd_restart()
option = "--autostart"
check_pool_list(pool_name, option, True)
# Step (15)
# Pool start
# When libvirtd starts up, it'll check to see if any of the storage
# pools have been activated externally. If so, then it'll mark the
# pool as active. This is independent of autostart.
# So a directory based storage pool is thus pretty much always active,
# and so as the SCSI pool.
if pool_type != "scsi" and (pool_type != "dir" or libvirt_version.version_compare(1, 2, 15)):
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result)
# Step (16)
# Pool info
pool_info = _pool.pool_info(pool_name)
logging.debug("Pool '%s' info:\n%s", pool_name, pool_info)
# Step (17)
# Pool UUID
result = virsh.pool_uuid(pool_info["Name"], ignore_status=True)
check_exit_status(result)
check_pool_info(pool_info, "UUID", result.stdout.strip())
# Step (18)
# Pool Name
result = virsh.pool_name(pool_info["UUID"], ignore_status=True)
check_exit_status(result)
check_pool_info(pool_info, "Name", result.stdout.strip())
# Step (19)
# Pool refresh for 'dir' type pool
if pool_type == "dir":
os.mknod(vol_path)
result = virsh.pool_refresh(pool_name)
check_exit_status(result)
check_vol_list(vol_name, pool_name)
# Step (20)
# Create an over size vol in pool(expect fail), then check pool:
# 'Capacity', 'Allocation' and 'Available'
# For NFS type pool, there's a bug(BZ#1077068) about allocate volume,
# and glusterfs pool not support create volume, so not test them
if pool_type != "netfs":
vol_capacity = "10000G"
vol_allocation = "10000G"
result = virsh.vol_create_as("oversize_vol", pool_name, vol_capacity, vol_allocation, "raw")
check_exit_status(result, True)
new_info = _pool.pool_info(pool_name)
check_pool_info(pool_info, "Capacity", new_info["Capacity"])
check_pool_info(pool_info, "Allocation", new_info["Allocation"])
check_pool_info(pool_info, "Available", new_info["Available"])
# Step (21)
# Undefine pool, this should fail as the pool is active
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result, expect_error=True)
check_pool_list(pool_name, "", False)
# Step (22)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (23)
# Pool delete for 'dir' type pool
if pool_type == "dir":
for f in os.listdir(pool_target):
os.remove(os.path.join(pool_target, f))
result = virsh.pool_delete(pool_name, ignore_status=True)
check_exit_status(result)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if os.path.exists(pool_target):
raise error.TestFail("The target path '%s' still exist." % pool_target)
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result, True)
# Step (24)
# Pool undefine
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
try:
pvt.cleanup_pool(pool_name, pool_type, pool_target, emulated_image, **kwargs)
except error.TestFail, detail:
logging.error(str(detail))
if multipathd_status:
multipathd.start()
if os.path.exists(pool_xml):
os.remove(pool_xml)
# Get remote disk image path
blklist = virsh.domblklist(vm_name, uri=uri).stdout.split('\n')
logging.debug('domblklist %s:\n%s', vm_name, blklist)
for line in blklist:
if line.startswith(('hda', 'vda', 'sda')):
remote_disk_image = line.split()[-1]
break
# Local path of disk image
input_file = data_dir.get_tmp_dir() + '/%s.img' % vm_name
v2v_params.update({'input_file': input_file})
# Copy remote image to local with scp
remote.scp_from_remote(xen_host, 22, xen_host_user,
xen_host_passwd, remote_disk_image,
input_file)
elif checkpoint == 'pool_uuid':
virsh.pool_start(pool_name)
pooluuid = virsh.pool_uuid(pool_name).stdout.strip()
v2v_params['storage'] = pooluuid
elif checkpoint.startswith('vnc'):
vm_xml.VMXML.set_graphics_attr(vm_name, {'type': 'vnc'},
virsh_instance=virsh_instance)
if checkpoint == 'vnc_autoport':
params[checkpoint] = {'autoport': 'yes'}
vm_xml.VMXML.set_graphics_attr(vm_name, params[checkpoint],
virsh_instance=virsh_instance)
elif checkpoint == 'vnc_encrypt':
params[checkpoint] = {'passwd': params.get('vnc_passwd', 'redhat')}
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(
vm_name, virsh_instance=virsh_instance)
vm_xml.VMXML.add_security_info(
vmxml, params[checkpoint]['passwd'],
for line in blklist:
if line.startswith(('hda', 'vda', 'sda')):
params['remote_disk_image'] = line.split()[-1]
break
# Local path of disk image
params['img_path'] = data_dir.get_tmp_dir() + '/%s.img' % vm_name
if checkpoint == 'xvda_disk':
v2v_params['input_mode'] = 'disk'
v2v_params.update({'input_file': params['img_path']})
# Copy remote image to local with scp
remote.scp_from_remote(xen_host, 22, xen_host_user,
xen_host_passwd,
params['remote_disk_image'],
params['img_path'])
if checkpoint == 'pool_uuid':
virsh.pool_start(pool_name)
pooluuid = virsh.pool_uuid(pool_name).stdout.strip()
v2v_params['storage'] = pooluuid
if checkpoint.startswith('vnc'):
vm_xml.VMXML.set_graphics_attr(vm_name, {'type': 'vnc'},
virsh_instance=virsh_instance)
if checkpoint == 'vnc_autoport':
params[checkpoint] = {'autoport': 'yes'}
vm_xml.VMXML.set_graphics_attr(vm_name, params[checkpoint],
virsh_instance=virsh_instance)
elif checkpoint == 'vnc_encrypt':
params[checkpoint] = {'passwd': params.get('vnc_passwd', 'redhat')}
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(
vm_name, virsh_instance=virsh_instance)
vm_xml.VMXML.add_security_info(
vmxml, params[checkpoint]['passwd'],
def run(test, params, env):
"""
Test the virsh pool commands with acl, initiate a pool then do
following operations.
(1) Undefine a given type pool
(2) Define the pool from xml
(3) Build given type pool
(4) Start pool
(5) Destroy pool
(6) Refresh pool after start it
(7) Run vol-list with the pool
(9) Delete pool
For negative cases, redo failed step to make the case run continue.
Run cleanup at last restore env.
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
# The file for dumped pool xml
pool_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(test.tmpdir, pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
vg_name = pool_name
vol_path = os.path.join(pool_target, vol_name)
define_acl = "yes" == params.get("define_acl", "no")
undefine_acl = "yes" == params.get("undefine_acl", "no")
start_acl = "yes" == params.get("start_acl", "no")
destroy_acl = "yes" == params.get("destroy_acl", "no")
build_acl = "yes" == params.get("build_acl", "no")
delete_acl = "yes" == params.get("delete_acl", "no")
refresh_acl = "yes" == params.get("refresh_acl", "no")
vol_list_acl = "yes" == params.get("vol_list_acl", "no")
list_dumpxml_acl = "yes" == params.get("list_dumpxml_acl", "no")
src_pool_error = "yes" == params.get("src_pool_error", "no")
define_error = "yes" == params.get("define_error", "no")
undefine_error = "yes" == params.get("undefine_error", "no")
start_error = "yes" == params.get("start_error", "no")
destroy_error = "yes" == params.get("destroy_error", "no")
build_error = "yes" == params.get("build_error", "no")
delete_error = "yes" == params.get("delete_error", "no")
refresh_error = "yes" == params.get("refresh_error", "no")
vol_list_error = "yes" == params.get("vol_list_error", "no")
# Clean up flags:
# cleanup_env[0] for nfs, cleanup_env[1] for iscsi, cleanup_env[2] for lvm
# cleanup_env[3] for selinux backup status, cleanup_env[4] for gluster
cleanup_env = [False, False, False, "", False]
# libvirt acl related params
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current"
" libvirt version.")
acl_dargs = {
'uri': uri,
'unprivileged_user': unprivileged_user,
'debug': True
}
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
if list_dumpxml_acl:
result = virsh.pool_list(option, **acl_dargs)
else:
result = virsh.pool_list(option, ignore_status=True)
utlv.check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)[\ +\n]",
str(result.stdout))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
raise error.TestFail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
raise error.TestFail("Expect pool '%s' doesn't exist." % pool_name)
# Run Testcase
kwargs = {'source_format': params.get('pool_source_format', 'ext4')}
try:
_pool = libvirt_storage.StoragePool()
# Init a pool for test
result = utlv.define_pool(pool_name, pool_type, pool_target,
cleanup_env, **kwargs)
utlv.check_exit_status(result, src_pool_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if list_dumpxml_acl:
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml, **acl_dargs)
else:
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Step (1)
# Undefine pool
if undefine_acl:
result = virsh.pool_undefine(pool_name, **acl_dargs)
else:
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result, undefine_error)
if undefine_error:
check_pool_list(pool_name, "--all", False)
# Redo under negative case to keep case continue
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
else:
check_pool_list(pool_name, "--all", True)
# Step (2)
# Define pool from XML file
if define_acl:
result = virsh.pool_define(pool_xml, **acl_dargs)
else:
result = virsh.pool_define(pool_xml)
utlv.check_exit_status(result, define_error)
if define_error:
# Redo under negative case to keep case continue
result = virsh.pool_define(pool_xml)
utlv.check_exit_status(result)
# Step (3)
# '--overwrite/--no-overwrite' just for fs/disk/logiacl type pool
# disk/fs pool: as prepare step already make label and create filesystem
# for the disk, use '--overwrite' is necessary
# logical_pool: build pool will fail if VG already exist, BZ#1373711
if pool_type != "logical":
option = ''
if pool_type in ['disk', 'fs']:
option = '--overwrite'
result = virsh.pool_build(pool_name, option, ignore_status=True)
utlv.check_exit_status(result)
if build_acl:
result = virsh.pool_build(pool_name, option, **acl_dargs)
else:
result = virsh.pool_build(pool_name,
option,
ignore_status=True)
utlv.check_exit_status(result, build_error)
if build_error:
# Redo under negative case to keep case continue
result = virsh.pool_build(pool_name, option, ignore_status=True)
utlv.check_exit_status(result)
# For iSCSI pool, we need discover targets before start the pool
if pool_type == 'iscsi':
cmd = 'iscsiadm -m discovery -t sendtargets -p 127.0.0.1'
process.run(cmd, shell=True)
# Step (4)
# Pool start
if start_acl:
result = virsh.pool_start(pool_name, **acl_dargs)
else:
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result, start_error)
if start_error:
# Redo under negative case to keep case continue
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (5)
# Pool destroy
if destroy_acl:
result = virsh.pool_destroy(pool_name, **acl_dargs)
else:
result = virsh.pool_destroy(pool_name)
if result:
if destroy_error:
raise error.TestFail("Expect fail, but run successfully.")
else:
if not destroy_error:
raise error.TestFail("Pool %s destroy failed, not expected." %
pool_name)
else:
# Redo under negative case to keep case continue
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (6)
# Pool refresh for 'dir' type pool
# Pool start
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
if pool_type == "dir":
os.mknod(vol_path)
if refresh_acl:
result = virsh.pool_refresh(pool_name, **acl_dargs)
else:
result = virsh.pool_refresh(pool_name)
utlv.check_exit_status(result, refresh_error)
# Step (7)
# Pool vol-list
if vol_list_acl:
result = virsh.vol_list(pool_name, **acl_dargs)
else:
result = virsh.vol_list(pool_name)
utlv.check_exit_status(result, vol_list_error)
# Step (8)
# Pool delete for 'dir' type pool
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
if pool_type == "dir":
if os.path.exists(vol_path):
os.remove(vol_path)
if delete_acl:
result = virsh.pool_delete(pool_name, **acl_dargs)
else:
result = virsh.pool_delete(pool_name, ignore_status=True)
utlv.check_exit_status(result, delete_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if not delete_error:
if os.path.exists(pool_target):
raise error.TestFail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
if os.path.exists(pool_xml):
os.remove(pool_xml)
if not _pool.delete_pool(pool_name):
logging.error("Can't delete pool: %s", pool_name)
if cleanup_env[2]:
cmd = "pvs |grep %s |awk '{print $1}'" % vg_name
pv_name = process.system_output(cmd, shell=True)
lv_utils.vg_remove(vg_name)
process.run("pvremove %s" % pv_name, shell=True)
if cleanup_env[1]:
utlv.setup_or_cleanup_iscsi(False)
if cleanup_env[0]:
utlv.setup_or_cleanup_nfs(False, restore_selinux=cleanup_env[3])
def run(test, params, env):
"""
Test the virsh pool commands
(1) Define a given type pool
(2) List pool with '--inactive --type' options
(3) Dumpxml for the pool
(4) Undefine the pool
(5) Define pool by using the XML file in step (3)
(6) Build the pool(except 'disk' type pool
For 'fs' type pool, cover --overwrite and --no-overwrite options
(7) Start the pool
(8) List pool with '--persistent --type' options
(9) Mark pool autostart
(10) List pool with '--autostart --type' options
(11) Restart libvirtd and list pool with '--autostart --persistent' options
(12) Destroy the pool
(13) Unmark pool autostart
(14) Repeat step (11)
(15) Start the pool
(16) Get pool info
(17) Get pool uuid by name
(18) Get pool name by uuid
(19) Refresh the pool
For 'dir' type pool, touch a file under target path and refresh again
to make the new file show in vol-list.
(20) Destroy the pool
(21) Delete pool for 'dir' type pool. After the command, the pool object
will still exist but target path will be deleted
(22) Undefine the pool
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
# The file for dumped pool xml
pool_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(test.tmpdir, pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
vg_name = pool_name
status_error = "yes" == params.get("status_error", "no")
vol_path = os.path.join(pool_target, vol_name)
# Clean up flags:
# cleanup_env[0] for nfs, cleanup_env[1] for iscsi, cleanup_env[2] for lvm
cleanup_env = [False, False, False]
def check_exit_status(result, expect_error=False):
"""
Check the exit status of virsh commands.
:param result: Virsh command result object
:param expect_error: Boolean value, expect command success or fail
"""
if not expect_error:
if result.exit_status != 0:
raise error.TestFail(result.stderr)
else:
logging.debug("Command output:\n%s", result.stdout.strip())
elif expect_error and result.exit_status == 0:
raise error.TestFail("Expect fail, but run successfully.")
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
result = virsh.pool_list(option, ignore_status=True)
check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)[\ +\n]",
str(result.stdout))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
raise error.TestFail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
raise error.TestFail("Expect pool '%s' doesn't exist." % pool_name)
def check_vol_list(vol_name, pool_name):
"""
Check volume from the list
:param vol_name: Name of the volume
:param pool_name: Name of the pool
"""
found = False
# Get the volume list stored in a variable
result = virsh.vol_list(pool_name, ignore_status=True)
check_exit_status(result)
output = re.findall(r"(\S+)\ +(\S+)[\ +\n]", str(result.stdout))
for item in output:
if vol_name in item[0]:
found = True
break
if found:
logging.debug(
"Find volume '%s' in pool '%s'.", vol_name, pool_name)
else:
raise error.TestFail(
"Not find volume '%s' in pool '%s'." %
(vol_name, pool_name))
def check_pool_info(pool_info, check_point, value):
"""
Check the pool name, uuid, etc.
:param pool_info: A dict include pool's information
:param key: Key of pool info dict, available value: Name, UUID, State
Persistent, Autostart, Capacity, Allocation, Available
:param value: Expect value of pool_info[key]
"""
if pool_info is None:
raise error.TestFail("Pool info dictionary is needed.")
if pool_info[check_point] == value:
logging.debug("Pool '%s' is '%s'.", check_point, value)
else:
raise error.TestFail("Pool '%s' isn't '%s'." % (check_point,
value))
# Run Testcase
try:
_pool = libvirt_storage.StoragePool()
# Step (1)
# Pool define
result = utils_test.libvirt.define_pool(pool_name, pool_type,
pool_target, cleanup_env)
check_exit_status(result, status_error)
# Step (2)
# Pool list
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (3)
# Pool dumpxml
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Step (4)
# Undefine pool
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result)
check_pool_list(pool_name, "--all", True)
# Step (5)
# Define pool from XML file
result = virsh.pool_define(pool_xml)
check_exit_status(result, status_error)
# Step (6)
# Buid pool, this step may fail for 'disk' and 'logical' types pool
if pool_type not in ["disk", "logical"]:
option = ""
# Options --overwrite and --no-overwrite can only be used to
# build a filesystem pool, but it will fail for now
# if pool_type == "fs":
# option = '--overwrite'
result = virsh.pool_build(pool_name, option, ignore_status=True)
check_exit_status(result)
# Step (7)
# Pool start
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result)
# Step (8)
# Pool list
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (9)
# Pool autostart
result = virsh.pool_autostart(pool_name, ignore_status=True)
check_exit_status(result)
# Step (10)
# Pool list
option = "--autostart --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (11)
# Restart libvirtd and check the autostart pool
utils_libvirtd.libvirtd_restart()
option = "--autostart --persistent"
check_pool_list(pool_name, option)
# Step (12)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (13)
# Pool autostart disable
result = virsh.pool_autostart(pool_name, "--disable",
ignore_status=True)
check_exit_status(result)
# Step (14)
# Repeat step (11)
utils_libvirtd.libvirtd_restart()
option = "--autostart"
check_pool_list(pool_name, option, True)
# Step (15)
# Pool start
# If the filesystem cntaining the directory is mounted, then the
# directory will show as running, which means the local 'dir' pool
# don't need start after restart libvirtd
if pool_type != "dir":
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result)
# Step (16)
# Pool info
pool_info = _pool.pool_info(pool_name)
logging.debug("Pool '%s' info:\n%s", pool_name, pool_info)
# Step (17)
# Pool UUID
result = virsh.pool_uuid(pool_info["Name"], ignore_status=True)
check_exit_status(result)
check_pool_info(pool_info, "UUID", result.stdout.strip())
# Step (18)
# Pool Name
result = virsh.pool_name(pool_info["UUID"], ignore_status=True)
check_exit_status(result)
check_pool_info(pool_info, "Name", result.stdout.strip())
# Step (19)
# Pool refresh for 'dir' type pool
if pool_type == "dir":
os.mknod(vol_path)
result = virsh.pool_refresh(pool_name)
check_exit_status(result)
check_vol_list(vol_name, pool_name)
# Step(20)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (21)
# Pool delete for 'dir' type pool
if pool_type == "dir":
if os.path.exists(vol_path):
os.remove(vol_path)
result = virsh.pool_delete(pool_name, ignore_status=True)
check_exit_status(result)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if os.path.exists(pool_target):
raise error.TestFail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result, True)
# Step (22)
# Pool undefine
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
if os.path.exists(pool_xml):
os.remove(pool_xml)
if not _pool.delete_pool(pool_name):
logging.error("Can't delete pool: %s", pool_name)
if cleanup_env[2]:
cmd = "pvs |grep %s |awk '{print $1}'" % vg_name
pv_name = utils.system_output(cmd)
lv_utils.vg_remove(vg_name)
utils.run("pvremove %s" % pv_name)
if cleanup_env[1]:
utils_test.libvirt.setup_or_cleanup_iscsi(False)
if cleanup_env[0]:
utils_test.libvirt.setup_or_cleanup_nfs(False)
def run(test, params, env):
"""
Test command: virsh pool-define-as; pool-build; pool-start; vol-create-as;
vol-list; attach-device; login; mount and dd; reboot; check persistence;
detach-device; pool-destroy; pool-undefine; clear lv,vg and pv;
Create a libvirt npiv pool from a vHBA's device mapper device and create
a volume out of the newly created pool and attach it to a guest, mount it,
reboot and check persistence after reboot.
Pre-requisite :
Host should have a vHBA associated with a mpath device
"""
pool_name = params.get("pool_create_name", "virt_test_pool_tmp")
pool_type = params.get("pool_type", "dir")
scsi_wwpn = params.get("scsi_wwpn", "WWPN_EXAMPLE")
scsi_wwnn = params.get("scsi_wwnn", "WWNN_EXAMPLE")
pool_target = params.get("pool_target", "pool_target")
target_device = params.get("disk_target_dev", "vda")
volume_name = params.get("volume_name", "imagefrommapper.qcow2")
volume_capacity = params.get("volume_capacity", '1G')
allocation = params.get("allocation", '1G')
frmt = params.get("volume_format", 'qcow2')
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
mount_disk = None
test_unit = None
if 'EXAMPLE' in scsi_wwnn or 'EXAMPLE' in scsi_wwpn:
raise exceptions.TestSkipError("Please provide proper WWPN/WWNN")
if not vm.is_alive():
vm.start()
pool_extra_args = ""
libvirt_vm = lib_vm.VM(vm_name, vm.params, vm.root_dir,
vm.address_cache)
process.run("service multipathd restart", shell=True)
online_hbas_list = nodedev.find_hbas("hba")
first_online_hba = online_hbas_list[0]
old_mpath_devs = nodedev.find_mpath_devs()
logging.debug("the old mpath devs are: %s" % old_mpath_devs)
new_vhbas = nodedev.nodedev_create_from_xml(
{"nodedev_parent": first_online_hba,
"scsi_wwnn": scsi_wwnn,
"scsi_wwpn": scsi_wwpn})
logging.info("Newly created vHBA %s" % new_vhbas)
process.run("service multipathd restart", shell=True)
utils_misc.wait_for(
lambda: nodedev.is_mpath_devs_added(old_mpath_devs), timeout=5)
cur_mpath_devs = nodedev.find_mpath_devs()
logging.debug("the current mpath devs are: %s" % cur_mpath_devs)
new_mpath_devs = list(set(cur_mpath_devs).difference(
set(old_mpath_devs)))
logging.debug("newly added mpath devs are: %s" % new_mpath_devs)
if not new_mpath_devs:
raise exceptions.TestFail("No newly added mpath devices found, \
please check your FC settings")
source_dev = os.path.join('/dev/mapper/', new_mpath_devs[0])
logging.debug("We are going to use \"%s\" as our source device"
" to create a logical pool" % source_dev)
cmd = "parted %s mklabel msdos -s" % source_dev
cmd_result = process.run(cmd, shell=True)
utlv.check_exit_status(cmd_result)
if source_dev:
pool_extra_args = ' --source-dev %s' % source_dev
else:
raise exceptions.TestFail(
"The vHBA %s does not have any associated mpath device" % new_vhbas)
pool_ins = libvirt_storage.StoragePool()
if pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("Pool %s already exist" % pool_name)
# if no online hba cards on host, mark case failed
if not online_hbas_list:
raise exceptions.TestSkipError("Host doesn't have online hba cards")
try:
cmd_result = virsh.pool_define_as(
pool_name, pool_type, pool_target, pool_extra_args, ignore_status=True,
debug=True)
utlv.check_exit_status(cmd_result)
cmd_result = virsh.pool_build(pool_name)
utlv.check_exit_status(cmd_result)
cmd_result = virsh.pool_start(pool_name)
utlv.check_exit_status(cmd_result)
utlv.check_actived_pool(pool_name)
pool_detail = libvirt_xml.PoolXML.get_pool_details(pool_name)
logging.debug("Pool detail: %s", pool_detail)
cmd_result = virsh.vol_create_as(
volume_name, pool_name, volume_capacity, allocation, frmt, "", debug=True)
utlv.check_exit_status(cmd_result)
vol_list = utlv.get_vol_list(pool_name, timeout=10)
logging.debug('Volume list %s', vol_list)
for unit in vol_list:
test_unit = vol_list[unit]
logging.debug(unit)
disk_params = {'type_name': "file", 'target_dev': target_device,
'target_bus': "virtio", 'source_file': test_unit,
'driver_name': "qemu", 'driver_type': "raw"}
disk_xml = utlv.create_disk_xml(disk_params)
session = vm.wait_for_login()
bf_disks = libvirt_vm.get_disks()
attach_success = virsh.attach_device(
vm_name, disk_xml, debug=True)
utlv.check_exit_status(attach_success)
logging.debug("Disks before attach: %s", bf_disks)
af_disks = libvirt_vm.get_disks()
logging.debug("Disks after attach: %s", af_disks)
mount_disk = "".join(list(set(bf_disks) ^ set(af_disks)))
if not mount_disk:
raise exceptions.TestFail("Can not get attached device in vm.")
logging.debug("Attached device in vm:%s", mount_disk)
output = session.cmd_status_output('lsblk', timeout=15)
logging.debug("%s", output[1])
session.cmd_status_output('mkfs.ext4 %s' % mount_disk)
if mount_disk:
logging.info("%s", mount_disk)
mount_success = mount_and_dd(session, mount_disk)
if not mount_success:
raise exceptions.TestFail("Can not find mounted device")
session.close()
virsh.reboot(vm_name, debug=True)
session = vm.wait_for_login()
output = session.cmd_status_output('mount')
logging.debug("Mount output: %s", output[1])
if '/mnt' in output[1]:
logging.debug("Mount Successful accross reboot")
session.close()
status = virsh.detach_device(vm_name, disk_xml,
debug=True)
utlv.check_exit_status(status)
finally:
vm.destroy(gracefully=False)
logging.debug('Destroying pool %s', pool_name)
virsh.pool_destroy(pool_name)
logging.debug('Undefining pool %s', pool_name)
virsh.pool_undefine(pool_name)
if test_unit:
process.system('lvremove -f %s' % test_unit, verbose=True)
process.system('vgremove -f %s' % pool_name, verbose=True)
process.system('pvremove -f %s' % source_dev, verbose=True)
if new_vhbas:
nodedev.vhbas_cleanup(new_vhbas.split())
process.run("service multipathd restart", shell=True)
def run(test, params, env):
"""
Convert specific xen guest
"""
for v in list(params.values()):
if "V2V_EXAMPLE" in v:
test.cancel("Please set real value for %s" % v)
if utils_v2v.V2V_EXEC is None:
test.cancel('Missing command: virt-v2v')
vm_name = params.get('main_vm')
new_vm_name = params.get('new_vm_name')
xen_host = params.get('xen_hostname')
xen_host_user = params.get('xen_host_user', 'root')
xen_host_passwd = params.get('xen_host_passwd', 'redhat')
output_mode = params.get('output_mode')
v2v_timeout = int(params.get('v2v_timeout', 1200))
status_error = 'yes' == params.get('status_error', 'no')
skip_vm_check = params.get('skip_vm_check', 'no')
skip_reason = params.get('skip_reason')
pool_name = params.get('pool_name', 'v2v_test')
pool_type = params.get('pool_type', 'dir')
pool_target = params.get('pool_target_path', 'v2v_pool')
pvt = libvirt.PoolVolumeTest(test, params)
address_cache = env.get('address_cache')
checkpoint = params.get('checkpoint', '')
bk_list = ['vnc_autoport', 'vnc_encrypt', 'vnc_encrypt_warning']
error_list = []
# For construct rhv-upload option in v2v cmd
output_method = params.get("output_method")
rhv_upload_opts = params.get("rhv_upload_opts")
storage_name = params.get('storage_name')
# for get ca.crt file from ovirt engine
rhv_passwd = params.get("rhv_upload_passwd")
rhv_passwd_file = params.get("rhv_upload_passwd_file")
ovirt_engine_passwd = params.get("ovirt_engine_password")
ovirt_hostname = params.get("ovirt_engine_url").split(
'/')[2] if params.get("ovirt_engine_url") else None
ovirt_ca_file_path = params.get("ovirt_ca_file_path")
local_ca_file_path = params.get("local_ca_file_path")
def log_fail(msg):
"""
Log error and update error list
"""
logging.error(msg)
error_list.append(msg)
def set_graphics(virsh_instance, param):
"""
Set graphics attributes of vm xml
"""
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(
vm_name, virsh_instance=virsh_instance)
graphic = vmxml.xmltreefile.find('devices').find('graphics')
for key in param:
logging.debug('Set %s=\'%s\'' % (key, param[key]))
graphic.set(key, param[key])
vmxml.sync(virsh_instance=virsh_instance)
def check_grub_file(vmcheck, check):
"""
Check grub file content
"""
logging.info('Checking grub file')
grub_file = utils_misc.get_bootloader_cfg(session=vmcheck.session)
if not grub_file:
test.error('Not found grub file')
content = vmcheck.session.cmd('cat %s' % grub_file)
if check == 'console_xvc0':
if 'console=xvc0' in content:
log_fail('"console=xvc0" still exists')
def check_kernel(vmcheck):
"""
Check content of /etc/sysconfig/kernel
"""
logging.info('Checking /etc/sysconfig/kernel file')
content = vmcheck.session.cmd('cat /etc/sysconfig/kernel')
logging.debug(content)
if 'DEFAULTKERNEL=kernel' not in content:
log_fail('Not find "DEFAULTKERNEL=kernel"')
elif 'DEFAULTKERNEL=kernel-xen' in content:
log_fail('DEFAULTKERNEL is "kernel-xen"')
def check_sound_card(vmcheck, check):
"""
Check sound status of vm from xml
"""
xml = virsh.dumpxml(vm_name,
session_id=vmcheck.virsh_session_id).stdout
logging.debug(xml)
if check == 'sound' and '<sound model' in xml:
log_fail('Sound card should be removed')
if check == 'pcspk' and output_mode == 'libvirt' and "<sound model='pcspk'" not in xml:
log_fail('Sound card should be "pcspk"')
def check_rhsrvany_md5(vmcheck):
"""
Check if MD5 and SHA1 of rhsrvany.exe are correct
"""
logging.info('Check md5 and sha1 of rhsrvany.exe')
val_md5, val_sha1 = params.get('val_md5'), params.get('val_sha1')
logging.info('Expect MD5=%s, SHA1=%s', val_md5, val_sha1)
if not val_md5 or not val_sha1:
test.error('No MD5 or SHA1 value provided')
cmd_sha1 = params.get('cmd_sha1')
cmd_md5 = cmd_sha1 + ' MD5'
sha1 = vmcheck.session.cmd_output(
cmd_sha1, safe=True).strip().split('\n')[1].replace(' ', '')
md5 = vmcheck.session.cmd_output(
cmd_md5, safe=True).strip().split('\n')[1].replace(' ', '')
logging.info('Actual MD5=%s, SHA1=%s', md5, sha1)
if sha1 == val_sha1 and md5 == val_md5:
logging.info('MD5 and SHA1 are correct')
else:
log_fail('MD5 or SHA1 of rhsrvany.exe not correct')
def check_disk(vmcheck, count):
"""
Check if number of disks meets expectation
"""
logging.info('Expect number of disks: %d', count)
actual = vmcheck.session.cmd('lsblk |grep disk |wc -l').strip()
logging.info('Actual number of disks: %s', actual)
if int(actual) != count:
log_fail('Number of disks is wrong')
def check_result(result, status_error):
"""
Check virt-v2v command result
"""
libvirt.check_exit_status(result, status_error)
output = result.stdout + result.stderr
if not status_error and checkpoint != 'vdsm':
if output_mode == 'rhev':
if not utils_v2v.import_vm_to_ovirt(
params, address_cache, timeout=v2v_timeout):
test.fail('Import VM failed')
elif output_mode == 'libvirt':
try:
virsh.start(vm_name, debug=True, ignore_status=False)
except Exception as e:
test.fail('Start vm failed: %s', str(e))
# Check guest following the checkpoint document after convertion
logging.info('Checking common checkpoints for v2v')
vmchecker = VMChecker(test, params, env)
params['vmchecker'] = vmchecker
if params.get('skip_vm_check') != 'yes':
ret = vmchecker.run()
if len(ret) == 0:
logging.info("All common checkpoints passed")
else:
logging.info('Skip checking vm after conversion: %s' %
skip_reason)
# Check specific checkpoints
if checkpoint == 'console_xvc0':
check_grub_file(vmchecker.checker, 'console_xvc0')
if checkpoint in ('vnc_autoport', 'vnc_encrypt'):
vmchecker.check_graphics(params[checkpoint])
if checkpoint == 'sdl':
if output_mode == 'libvirt':
vmchecker.check_graphics({'type': 'vnc'})
elif output_mode == 'rhev':
vmchecker.check_graphics({'type': 'spice'})
if checkpoint == 'pv_with_regular_kernel':
check_kernel(vmchecker.checker)
if checkpoint in ['sound', 'pcspk']:
check_sound_card(vmchecker.checker, checkpoint)
if checkpoint == 'rhsrvany_md5':
check_rhsrvany_md5(vmchecker.checker)
if checkpoint == 'multidisk':
check_disk(vmchecker.checker, params['disk_count'])
log_check = utils_v2v.check_log(params, output)
if log_check:
log_fail(log_check)
# Merge 2 error lists
if params.get('vmchecker'):
error_list.extend(params['vmchecker'].errors)
# Virtio drivers will not be installed without virtio-win setup
if checkpoint == 'virtio_win_unset':
missing_list = params.get('missing').split(',')
expect_errors = ['Not find driver: ' + x for x in missing_list]
logging.debug('Expect errors: %s' % expect_errors)
logging.debug('Actual errors: %s' % error_list)
if set(error_list) == set(expect_errors):
error_list[:] = []
else:
logging.error('Virtio drivers not meet expectation')
if len(error_list):
test.fail('%d checkpoints failed: %s' %
(len(error_list), error_list))
try:
v2v_params = {
'hostname': xen_host,
'hypervisor': 'xen',
'main_vm': vm_name,
'v2v_opts': '-v -x',
'input_mode': 'libvirt',
'new_name': new_vm_name,
'password': xen_host_passwd,
'storage': params.get('output_storage', 'default'),
'network': params.get('network'),
'bridge': params.get('bridge'),
'target': params.get('target'),
'output_method': output_method,
'storage_name': storage_name,
'rhv_upload_opts': rhv_upload_opts
}
bk_xml = None
os.environ['LIBGUESTFS_BACKEND'] = 'direct'
# Setup ssh-agent access to xen hypervisor
logging.info('set up ssh-agent access ')
ssh_key.setup_ssh_key(xen_host,
user=xen_host_user,
port=22,
password=xen_host_passwd)
utils_misc.add_identities_into_ssh_agent()
if params.get('output_format'):
v2v_params.update({'output_format': params.get('output_format')})
# Build rhev related options
if output_mode == 'rhev':
# To RHV doesn't support 'qcow2' right now
v2v_params['output_format'] = 'raw'
# create different sasl_user name for different job
params.update({
'sasl_user':
params.get("sasl_user") + utils_misc.generate_random_string(3)
})
logging.info('sals user name is %s' % params.get("sasl_user"))
# Create SASL user on the ovirt host
user_pwd = "[['%s', '%s']]" % (params.get("sasl_user"),
params.get("sasl_pwd"))
v2v_sasl = utils_sasl.SASL(sasl_user_pwd=user_pwd)
v2v_sasl.server_ip = params.get("remote_ip")
v2v_sasl.server_user = params.get('remote_user')
v2v_sasl.server_pwd = params.get('remote_pwd')
v2v_sasl.setup(remote=True)
if output_method == 'rhv_upload':
# Create password file for '-o rhv_upload' to connect to ovirt
with open(rhv_passwd_file, 'w') as f:
f.write(rhv_passwd)
# Copy ca file from ovirt to local
remote.scp_from_remote(ovirt_hostname, 22, 'root',
ovirt_engine_passwd, ovirt_ca_file_path,
local_ca_file_path)
# Create libvirt dir pool
if output_mode == 'libvirt':
pvt.pre_pool(pool_name, pool_type, pool_target, '')
uri = utils_v2v.Uri('xen').get_uri(xen_host)
# Check if xen guest exists
if not virsh.domain_exists(vm_name, uri=uri):
logging.error('VM %s not exists', vm_name)
virsh_instance = virsh.VirshPersistent()
virsh_instance.set_uri(uri)
if checkpoint in bk_list:
bk_xml = vm_xml.VMXML.new_from_inactive_dumpxml(
vm_name, virsh_instance=virsh_instance)
if checkpoint == 'guest_uuid':
uuid = virsh.domuuid(vm_name, uri=uri).stdout.strip()
v2v_params['main_vm'] = uuid
if checkpoint in ['format_convert', 'xvda_disk']:
# Get remote disk image path
blklist = virsh.domblklist(vm_name, uri=uri).stdout.split('\n')
logging.debug('domblklist %s:\n%s', vm_name, blklist)
for line in blklist:
if line.strip().startswith(('hda', 'vda', 'sda', 'xvda')):
params['remote_disk_image'] = line.split()[-1]
break
# Local path of disk image
params['img_path'] = data_dir.get_tmp_dir() + '/%s.img' % vm_name
if checkpoint == 'xvda_disk':
v2v_params['input_mode'] = 'disk'
v2v_params['hypervisor'] = 'kvm'
v2v_params.update({'input_file': params['img_path']})
# Copy remote image to local with scp
remote.scp_from_remote(xen_host, 22, xen_host_user,
xen_host_passwd,
params['remote_disk_image'],
params['img_path'])
if checkpoint == 'pool_uuid':
virsh.pool_start(pool_name)
pooluuid = virsh.pool_uuid(pool_name).stdout.strip()
v2v_params['storage'] = pooluuid
if checkpoint.startswith('vnc'):
vm_xml.VMXML.set_graphics_attr(vm_name, {'type': 'vnc'},
virsh_instance=virsh_instance)
if checkpoint == 'vnc_autoport':
params[checkpoint] = {'autoport': 'yes'}
vm_xml.VMXML.set_graphics_attr(vm_name,
params[checkpoint],
virsh_instance=virsh_instance)
elif checkpoint in ['vnc_encrypt', 'vnc_encrypt_warning']:
params[checkpoint] = {
'passwd': params.get('vnc_passwd', 'redhat')
}
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(
vm_name, virsh_instance=virsh_instance)
vm_xml.VMXML.add_security_info(vmxml,
params[checkpoint]['passwd'],
virsh_instance=virsh_instance)
logging.debug(
virsh_instance.dumpxml(vm_name, extra='--security-info'))
if checkpoint.startswith('libguestfs_backend'):
value = checkpoint[19:]
if value == 'empty':
value = ''
logging.info('Set LIBGUESTFS_BACKEND to "%s"', value)
os.environ['LIBGUESTFS_BACKEND'] = value
if checkpoint == 'same_name':
logging.info('Convert guest and rename to %s', new_vm_name)
v2v_params.update({'new_name': new_vm_name})
if checkpoint == 'no_passwordless_SSH':
logging.info('Unset $SSH_AUTH_SOCK')
os.unsetenv('SSH_AUTH_SOCK')
if checkpoint in ['xml_without_image', 'format_convert']:
xml_file = os.path.join(data_dir.get_tmp_dir(), '%s.xml' % vm_name)
virsh.dumpxml(vm_name, to_file=xml_file, uri=uri)
v2v_params['hypervisor'] = 'kvm'
v2v_params['input_mode'] = 'libvirtxml'
v2v_params.update({'input_file': xml_file})
if params.get('img_path'):
cmd = "sed -i 's|%s|%s|' %s" % (params['remote_disk_image'],
params['img_path'], xml_file)
process.run(cmd)
logging.debug(process.run('cat %s' % xml_file).stdout_text)
if checkpoint == 'ssh_banner':
session = remote.remote_login("ssh", xen_host, "22", "root",
xen_host_passwd, "#")
ssh_banner_content = r'"# no default banner path\n' \
r'#Banner /path/banner file\n' \
r'Banner /etc/ssh/ssh_banner"'
logging.info('Create ssh_banner file')
session.cmd('echo -e %s > /etc/ssh/ssh_banner' %
ssh_banner_content)
logging.info('Content of ssh_banner file:')
logging.info(session.cmd_output('cat /etc/ssh/ssh_banner'))
logging.info('Restart sshd service on xen host')
session.cmd('service sshd restart')
if checkpoint.startswith('virtio_win'):
src_dir = params.get('virtio_win_dir')
dest_dir = os.path.join(data_dir.get_tmp_dir(), 'virtio-win')
iso_path = os.path.join(dest_dir, 'virtio-win.iso')
if not os.path.exists(dest_dir):
shutil.copytree(src_dir, dest_dir)
virtio_win_env = params.get('virtio_win_env', 'VIRTIO_WIN')
process.run('rpm -e virtio-win')
if process.run('rpm -q virtio-win',
ignore_status=True).exit_status == 0:
test.error('not removed')
if checkpoint.endswith('unset'):
logging.info('Unset env %s' % virtio_win_env)
os.unsetenv(virtio_win_env)
if checkpoint.endswith('custom'):
logging.info('Set env %s=%s' % (virtio_win_env, dest_dir))
os.environ[virtio_win_env] = dest_dir
if checkpoint.endswith('iso_mount'):
logging.info('Mount iso to /opt')
process.run('mount %s /opt' % iso_path)
os.environ[virtio_win_env] = '/opt'
if checkpoint.endswith('iso_file'):
logging.info('Set env %s=%s' % (virtio_win_env, iso_path))
os.environ[virtio_win_env] = iso_path
if checkpoint == 'cdrom':
xml = vm_xml.VMXML.new_from_inactive_dumpxml(
vm_name, virsh_instance=virsh_instance)
logging.debug(xml.xmltreefile)
disks = xml.get_disk_all()
logging.debug('Disks: %r', disks)
for disk in list(disks.values()):
# Check if vm has cdrom attached
if disk.get(
'device') == 'cdrom' and disk.find('source') is None:
test.error('No CDROM image attached')
if checkpoint == 'vdsm':
extra_pkg = params.get('extra_pkg')
logging.info('Install %s', extra_pkg)
utils_package.package_install(extra_pkg.split(','))
# Backup conf file for recovery
for conf in params['bk_conf'].strip().split(','):
logging.debug('Back up %s', conf)
shutil.copyfile(conf, conf + '.bk')
logging.info('Configure libvirt for vdsm')
process.run('vdsm-tool configure --force')
logging.info('Start vdsm service')
service_manager = service.Factory.create_generic_service()
service_manager.start('vdsmd')
# Setup user and password
user_pwd = "[['%s', '%s']]" % (params.get("sasl_user"),
params.get("sasl_pwd"))
v2v_sasl = utils_sasl.SASL(sasl_user_pwd=user_pwd)
v2v_sasl.server_ip = 'localhost'
v2v_sasl.server_user = params.get('sasl_server_user', 'root')
v2v_sasl.server_pwd = params.get('sasl_server_passwd')
v2v_sasl.setup()
v2v_params['sasl_user'] = params.get("sasl_user")
v2v_params['sasl_pwd'] = params.get("sasl_pwd")
if checkpoint == 'multidisk':
params['disk_count'] = 0
blklist = virsh.domblklist(vm_name, uri=uri).stdout.split('\n')
logging.info(blklist)
for line in blklist:
if '/' in line:
params['disk_count'] += 1
logging.info('Total disks: %d', params['disk_count'])
# Check if xen guest exists again
if not virsh.domain_exists(vm_name, uri=uri):
logging.error('VM %s not exists', vm_name)
# Execute virt-v2v
v2v_result = utils_v2v.v2v_cmd(v2v_params)
if new_vm_name:
vm_name = new_vm_name
params['main_vm'] = new_vm_name
check_result(v2v_result, status_error)
finally:
# Cleanup constant files
utils_v2v.cleanup_constant_files(params)
process.run('ssh-agent -k')
if checkpoint == 'vdsm':
logging.info('Stop vdsmd')
service_manager = service.Factory.create_generic_service()
service_manager.stop('vdsmd')
if params.get('extra_pkg'):
utils_package.package_remove(params['extra_pkg'].split(','))
for conf in params['bk_conf'].strip().split(','):
if os.path.exists(conf + '.bk'):
logging.debug('Recover %s', conf)
os.remove(conf)
shutil.move(conf + '.bk', conf)
logging.info('Restart libvirtd')
libvirtd = utils_libvirtd.Libvirtd()
libvirtd.restart()
logging.info('Start network "default"')
virsh.net_start('default')
virsh.undefine(vm_name)
if params.get('vmchecker'):
params['vmchecker'].cleanup()
if output_mode == 'libvirt':
pvt.cleanup_pool(pool_name, pool_type, pool_target, '')
if bk_xml:
bk_xml.sync(virsh_instance=virsh_instance)
virsh_instance.close_session()
if checkpoint == 'ssh_banner':
logging.info('Remove ssh_banner file')
session = remote.remote_login("ssh", xen_host, "22", "root",
xen_host_passwd, "#")
session.cmd('rm -f /etc/ssh/ssh_banner')
session.cmd('service sshd restart')
if checkpoint.startswith('virtio_win'):
utils_package.package_install(['virtio-win'])
def create_pool():
"""
Define and start a pool.
"""
sp = libvirt_storage.StoragePool()
if create_by_xml:
p_xml = pool_xml.PoolXML(pool_type=pool_type)
p_xml.name = pool_name
s_xml = pool_xml.SourceXML()
s_xml.vg_name = disk_src_pool
source_host = []
for (host_name, host_port) in zip(disk_src_host.split(),
disk_src_port.split()):
source_host.append({'name': host_name, 'port': host_port})
s_xml.hosts = source_host
if auth_type:
s_xml.auth_type = auth_type
if auth_user:
s_xml.auth_username = auth_user
if auth_usage:
s_xml.secret_usage = auth_usage
p_xml.source = s_xml
logging.debug("Pool xml: %s", p_xml)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
else:
auth_opt = ""
if client_name and client_key:
auth_opt = (
"--auth-type %s --auth-username %s --secret-usage '%s'" %
(auth_type, auth_user, auth_usage))
if not sp.define_rbd_pool(
pool_name, mon_host, disk_src_pool, extra=auth_opt):
test.fail("Failed to define storage pool")
if not sp.build_pool(pool_name):
test.fail("Failed to build storage pool")
if not sp.start_pool(pool_name):
test.fail("Failed to start storage pool")
# Check pool operation
ret = virsh.pool_refresh(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_uuid(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
# pool-info
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'no':
test.fail("Failed to check pool information")
# pool-autostart
if not sp.set_pool_autostart(pool_name):
test.fail("Failed to set pool autostart")
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'yes':
test.fail("Failed to check pool information")
# pool-autostart --disable
if not sp.set_pool_autostart(pool_name, "--disable"):
test.fail("Failed to set pool autostart")
# If port is not pre-configured, port value should not be hardcoded in pool information.
if "yes" == params.get("rbd_port", "no"):
if 'port' in virsh.pool_dumpxml(pool_name):
test.fail("port attribute should not be in pool information")
# find-storage-pool-sources-as
if "yes" == params.get("find_storage_pool_sources_as", "no"):
ret = virsh.find_storage_pool_sources_as("rbd", mon_host)
libvirt.check_result(ret, skip_if=unsupported_err)
def create_pool():
"""
Define and start a pool.
"""
sp = libvirt_storage.StoragePool()
if create_by_xml:
p_xml = pool_xml.PoolXML(pool_type=pool_type)
p_xml.name = pool_name
s_xml = pool_xml.SourceXML()
s_xml.vg_name = disk_src_pool
source_host = []
for (host_name, host_port) in zip(
disk_src_host.split(), disk_src_port.split()):
source_host.append({'name': host_name,
'port': host_port})
s_xml.hosts = source_host
if auth_type:
s_xml.auth_type = auth_type
if auth_user:
s_xml.auth_username = auth_user
if auth_usage:
s_xml.secret_usage = auth_usage
p_xml.source = s_xml
logging.debug("Pool xml: %s", p_xml)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
else:
auth_opt = ""
if client_name and client_key:
auth_opt = ("--auth-type %s --auth-username %s --secret-usage '%s'"
% (auth_type, auth_user, auth_usage))
if not sp.define_rbd_pool(pool_name, mon_host,
disk_src_pool, extra=auth_opt):
test.fail("Failed to define storage pool")
if not sp.build_pool(pool_name):
test.fail("Failed to build storage pool")
if not sp.start_pool(pool_name):
test.fail("Failed to start storage pool")
# Check pool operation
ret = virsh.pool_refresh(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_uuid(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
# pool-info
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'no':
test.fail("Failed to check pool information")
# pool-autostart
if not sp.set_pool_autostart(pool_name):
test.fail("Failed to set pool autostart")
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'yes':
test.fail("Failed to check pool information")
# pool-autostart --disable
if not sp.set_pool_autostart(pool_name, "--disable"):
test.fail("Failed to set pool autostart")
# If port is not pre-configured, port value should not be hardcoded in pool information.
if "yes" == params.get("rbd_port", "no"):
if 'port' in virsh.pool_dumpxml(pool_name):
test.fail("port attribute should not be in pool information")
# find-storage-pool-sources-as
if "yes" == params.get("find_storage_pool_sources_as", "no"):
ret = virsh.find_storage_pool_sources_as("rbd", mon_host)
libvirt.check_result(ret, skip_if=unsupported_err)
def run(test, params, env):
"""
Test command: virsh pool-define-as; pool-build; pool-start; vol-create-as;
vol-list; attach-device; login; mount and dd; reboot; check persistence;
detach-device; pool-destroy; pool-undefine; clear lv,vg and pv;
Create a libvirt npiv pool from a vHBA's device mapper device and create
a volume out of the newly created pool and attach it to a guest, mount it,
reboot and check persistence after reboot.
Pre-requisite :
Host should have a vHBA associated with a mpath device
"""
pool_name = params.get("pool_create_name", "virt_test_pool_tmp")
pool_type = params.get("pool_type", "dir")
scsi_wwpn = params.get("scsi_wwpn", "WWPN_EXAMPLE")
scsi_wwnn = params.get("scsi_wwnn", "WWNN_EXAMPLE")
pool_target = params.get("pool_target", "pool_target")
target_device = params.get("disk_target_dev", "vda")
volume_name = params.get("volume_name", "imagefrommapper.qcow2")
volume_capacity = params.get("volume_capacity", '1G')
allocation = params.get("allocation", '1G')
frmt = params.get("volume_format", 'qcow2')
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
mount_disk = None
test_unit = None
if 'EXAMPLE' in scsi_wwnn or 'EXAMPLE' in scsi_wwpn:
raise exceptions.TestSkipError("Please provide proper WWPN/WWNN")
if not vm.is_alive():
vm.start()
pool_extra_args = ""
libvirt_vm = lib_vm.VM(vm_name, vm.params, vm.root_dir, vm.address_cache)
process.run("service multipathd restart", shell=True)
online_hbas_list = nodedev.find_hbas("hba")
first_online_hba = online_hbas_list[0]
old_mpath_devs = nodedev.find_mpath_devs()
logging.debug("the old mpath devs are: %s" % old_mpath_devs)
new_vhbas = nodedev.nodedev_create_from_xml({
"nodedev_parent": first_online_hba,
"scsi_wwnn": scsi_wwnn,
"scsi_wwpn": scsi_wwpn
})
logging.info("Newly created vHBA %s" % new_vhbas)
process.run("service multipathd restart", shell=True)
utils_misc.wait_for(lambda: nodedev.is_mpath_devs_added(old_mpath_devs),
timeout=5)
cur_mpath_devs = nodedev.find_mpath_devs()
logging.debug("the current mpath devs are: %s" % cur_mpath_devs)
new_mpath_devs = list(set(cur_mpath_devs).difference(set(old_mpath_devs)))
logging.debug("newly added mpath devs are: %s" % new_mpath_devs)
if not new_mpath_devs:
raise exceptions.TestFail("No newly added mpath devices found, \
please check your FC settings")
source_dev = os.path.join('/dev/mapper/', new_mpath_devs[0])
logging.debug("We are going to use \"%s\" as our source device"
" to create a logical pool" % source_dev)
cmd = "parted %s mklabel msdos -s" % source_dev
cmd_result = process.run(cmd, shell=True)
utlv.check_exit_status(cmd_result)
if source_dev:
pool_extra_args = ' --source-dev %s' % source_dev
else:
raise exceptions.TestFail(
"The vHBA %s does not have any associated mpath device" %
new_vhbas)
pool_ins = libvirt_storage.StoragePool()
if pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("Pool %s already exist" % pool_name)
# if no online hba cards on host, mark case failed
if not online_hbas_list:
raise exceptions.TestSkipError("Host doesn't have online hba cards")
try:
cmd_result = virsh.pool_define_as(pool_name,
pool_type,
pool_target,
pool_extra_args,
ignore_status=True,
debug=True)
utlv.check_exit_status(cmd_result)
cmd_result = virsh.pool_build(pool_name)
utlv.check_exit_status(cmd_result)
cmd_result = virsh.pool_start(pool_name)
utlv.check_exit_status(cmd_result)
utlv.check_actived_pool(pool_name)
pool_detail = libvirt_xml.PoolXML.get_pool_details(pool_name)
logging.debug("Pool detail: %s", pool_detail)
cmd_result = virsh.vol_create_as(volume_name,
pool_name,
volume_capacity,
allocation,
frmt,
"",
debug=True)
utlv.check_exit_status(cmd_result)
vol_list = utlv.get_vol_list(pool_name, timeout=10)
logging.debug('Volume list %s', vol_list)
for unit in vol_list:
test_unit = vol_list[unit]
logging.debug(unit)
disk_params = {
'type_name': "file",
'target_dev': target_device,
'target_bus': "virtio",
'source_file': test_unit,
'driver_name': "qemu",
'driver_type': "raw"
}
disk_xml = utlv.create_disk_xml(disk_params)
session = vm.wait_for_login()
bf_disks = libvirt_vm.get_disks()
attach_success = virsh.attach_device(vm_name, disk_xml, debug=True)
utlv.check_exit_status(attach_success)
logging.debug("Disks before attach: %s", bf_disks)
af_disks = libvirt_vm.get_disks()
logging.debug("Disks after attach: %s", af_disks)
mount_disk = "".join(list(set(bf_disks) ^ set(af_disks)))
if not mount_disk:
raise exceptions.TestFail("Can not get attached device in vm.")
logging.debug("Attached device in vm:%s", mount_disk)
output = session.cmd_status_output('lsblk', timeout=15)
logging.debug("%s", output[1])
session.cmd_status_output('mkfs.ext4 %s' % mount_disk)
if mount_disk:
logging.info("%s", mount_disk)
mount_success = mount_and_dd(session, mount_disk)
if not mount_success:
raise exceptions.TestFail("Can not find mounted device")
session.close()
virsh.reboot(vm_name, debug=True)
session = vm.wait_for_login()
output = session.cmd_status_output('mount')
logging.debug("Mount output: %s", output[1])
if '/mnt' in output[1]:
logging.debug("Mount Successful accross reboot")
session.close()
status = virsh.detach_device(vm_name, disk_xml, debug=True)
utlv.check_exit_status(status)
finally:
vm.destroy(gracefully=False)
logging.debug('Destroying pool %s', pool_name)
virsh.pool_destroy(pool_name)
logging.debug('Undefining pool %s', pool_name)
virsh.pool_undefine(pool_name)
if test_unit:
process.system('lvremove -f %s' % test_unit, verbose=True)
process.system('vgremove -f %s' % pool_name, verbose=True)
process.system('pvremove -f %s' % source_dev, verbose=True)
if new_vhbas:
nodedev.vhbas_cleanup(new_vhbas.split())
process.run("service multipathd restart", shell=True)
define_pool(pool_name, pool_type, pool_target)
# Step (2)
result = virsh.pool_undefine(pool_name, ignore_status=True)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-undefine failed:\n%s" %
result.stdout)
else:
logging.debug("Pool: %s successfully undefined", pool_name)
shutil.rmtree(pool_target)
# Step (3)
define_pool(pool_name, pool_type, pool_target)
# Step (4)
result = virsh.pool_start(pool_name, ignore_status=True)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-start failed:\n%s" %
result.stdout)
else:
logging.debug("Pool: %s successfully started", pool_name)
# Step (5)
if not check_list_state(pool_name, "active"):
raise error.TestFail("State of the pool: %s is marked inactive"
"instead of active" % pool_name)
if not check_list_autostart(pool_name, "no"):
raise error.TestFail("Autostart of the pool: %s marked as yes"
"instead of no" % pool_name)
def run(test, params, env):
"""
Convert specific xen guest
"""
for v in list(params.values()):
if "V2V_EXAMPLE" in v:
test.cancel("Please set real value for %s" % v)
if utils_v2v.V2V_EXEC is None:
test.cancel('Missing command: virt-v2v')
vm_name = params.get('main_vm')
new_vm_name = params.get('new_vm_name')
xen_host = params.get('xen_hostname')
xen_host_user = params.get('xen_host_user', 'root')
xen_host_passwd = params.get('xen_host_passwd', 'redhat')
output_mode = params.get('output_mode')
v2v_timeout = int(params.get('v2v_timeout', 1200))
status_error = 'yes' == params.get('status_error', 'no')
pool_name = params.get('pool_name', 'v2v_test')
pool_type = params.get('pool_type', 'dir')
pool_target = params.get('pool_target_path', 'v2v_pool')
pvt = libvirt.PoolVolumeTest(test, params)
address_cache = env.get('address_cache')
checkpoint = params.get('checkpoint', '')
bk_list = ['vnc_autoport', 'vnc_encrypt', 'vnc_encrypt_warning']
error_list = []
def log_fail(msg):
"""
Log error and update error list
"""
logging.error(msg)
error_list.append(msg)
def set_graphics(virsh_instance, param):
"""
Set graphics attributes of vm xml
"""
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name, virsh_instance=virsh_instance)
graphic = vmxml.xmltreefile.find('devices').find('graphics')
for key in param:
logging.debug('Set %s=\'%s\'' % (key, param[key]))
graphic.set(key, param[key])
vmxml.sync(virsh_instance=virsh_instance)
def check_rhev_file_exist(vmcheck):
"""
Check if rhev files exist
"""
file_path = {
'rhev-apt.exe': r'C:\rhev-apt.exe',
'rhsrvany.exe': r'"C:\program files\redhat\rhev\apt\rhsrvany.exe"'
}
fail = False
for key in file_path:
status = vmcheck.session.cmd_status('dir %s' % file_path[key])
if not status:
logging.error('%s exists' % key)
fail = True
if fail:
log_fail('RHEV file exists after convert to kvm')
def check_grub_file(vmcheck, check):
"""
Check grub file content
"""
logging.info('Checking grub file')
grub_file = utils_misc.get_bootloader_cfg(session=vmcheck.session)
if not grub_file:
test.error('Not found grub file')
content = vmcheck.session.cmd('cat %s' % grub_file)
if check == 'console_xvc0':
if 'console=xvc0' in content:
log_fail('"console=xvc0" still exists')
def check_kernel(vmcheck):
"""
Check content of /etc/sysconfig/kernel
"""
logging.info('Checking /etc/sysconfig/kernel file')
content = vmcheck.session.cmd('cat /etc/sysconfig/kernel')
logging.debug(content)
if 'DEFAULTKERNEL=kernel' not in content:
log_fail('Not find "DEFAULTKERNEL=kernel"')
elif 'DEFAULTKERNEL=kernel-xen' in content:
log_fail('DEFAULTKERNEL is "kernel-xen"')
def check_sound_card(vmcheck, check):
"""
Check sound status of vm from xml
"""
xml = virsh.dumpxml(vm_name, session_id=vmcheck.virsh_session_id).stdout
logging.debug(xml)
if check == 'sound' and '<sound model' in xml:
log_fail('Sound card should be removed')
if check == 'pcspk' and "<sound model='pcspk'" not in xml:
log_fail('Sound card should be "pcspk"')
def check_rhsrvany_md5(vmcheck):
"""
Check if MD5 and SHA1 of rhsrvany.exe are correct
"""
logging.info('Check md5 and sha1 of rhsrvany.exe')
val_md5, val_sha1 = params.get('val_md5'), params.get('val_sha1')
logging.info('Expect MD5=%s, SHA1=%s', val_md5, val_sha1)
if not val_md5 or not val_sha1:
test.error('No MD5 or SHA1 value provided')
cmd_sha1 = params.get('cmd_sha1')
cmd_md5 = cmd_sha1 + ' MD5'
sha1 = vmcheck.session.cmd_output(cmd_sha1, safe=True).strip().split('\n')[1].replace(' ', '')
md5 = vmcheck.session.cmd_output(cmd_md5, safe=True).strip().split('\n')[1].replace(' ', '')
logging.info('Actual MD5=%s, SHA1=%s', md5, sha1)
if sha1 == val_sha1 and md5 == val_md5:
logging.info('MD5 and SHA1 are correct')
else:
log_fail('MD5 or SHA1 of rhsrvany.exe not correct')
def check_disk(vmcheck, count):
"""
Check if number of disks meets expectation
"""
logging.info('Expect number of disks: %d', count)
actual = vmcheck.session.cmd('lsblk |grep disk |wc -l').strip()
logging.info('Actual number of disks: %s', actual)
if int(actual) != count:
log_fail('Number of disks is wrong')
def check_result(result, status_error):
"""
Check virt-v2v command result
"""
libvirt.check_exit_status(result, status_error)
output = result.stdout + result.stderr
if not status_error and checkpoint != 'vdsm':
if output_mode == 'rhev':
if not utils_v2v.import_vm_to_ovirt(params, address_cache,
timeout=v2v_timeout):
test.fail('Import VM failed')
elif output_mode == 'libvirt':
try:
virsh.start(vm_name, debug=True, ignore_status=False)
except Exception as e:
test.fail('Start vm failed: %s', str(e))
# Check guest following the checkpoint document after convertion
logging.info('Checking common checkpoints for v2v')
vmchecker = VMChecker(test, params, env)
params['vmchecker'] = vmchecker
ret = vmchecker.run()
if len(ret) == 0:
logging.info("All common checkpoints passed")
# Check specific checkpoints
if checkpoint == 'rhev_file':
check_rhev_file_exist(vmchecker.checker)
if checkpoint == 'console_xvc0':
check_grub_file(vmchecker.checker, 'console_xvc0')
if checkpoint in ('vnc_autoport', 'vnc_encrypt'):
vmchecker.check_graphics(params[checkpoint])
if checkpoint == 'sdl':
if output_mode == 'libvirt':
vmchecker.check_graphics({'type': 'vnc'})
elif output_mode == 'rhev':
vmchecker.check_graphics({'type': 'spice'})
if checkpoint == 'pv_with_regular_kernel':
check_kernel(vmchecker.checker)
if checkpoint in ['sound', 'pcspk']:
check_sound_card(vmchecker.checker, checkpoint)
if checkpoint == 'rhsrvany_md5':
check_rhsrvany_md5(vmchecker.checker)
if checkpoint == 'multidisk':
check_disk(vmchecker.checker, params['disk_count'])
log_check = utils_v2v.check_log(params, output)
if log_check:
log_fail(log_check)
# Merge 2 error lists
if params.get('vmchecker'):
error_list.extend(params['vmchecker'].errors)
# Virtio drivers will not be installed without virtio-win setup
if checkpoint == 'virtio_win_unset':
missing_list = params.get('missing').split(',')
expect_errors = ['Not find driver: ' + x for x in missing_list]
logging.debug('Expect errors: %s' % expect_errors)
logging.debug('Actual errors: %s' % error_list)
if set(error_list) == set(expect_errors):
error_list[:] = []
else:
logging.error('Virtio drivers not meet expectation')
if len(error_list):
test.fail('%d checkpoints failed: %s' % (len(error_list), error_list))
try:
v2v_params = {
'hostname': xen_host, 'hypervisor': 'xen', 'main_vm': vm_name,
'v2v_opts': '-v -x', 'input_mode': 'libvirt',
'new_name': new_vm_name,
'storage': params.get('output_storage', 'default'),
'network': params.get('network'),
'bridge': params.get('bridge'),
'target': params.get('target')
}
bk_xml = None
os.environ['LIBGUESTFS_BACKEND'] = 'direct'
# Setup ssh-agent access to xen hypervisor
logging.info('set up ssh-agent access ')
ssh_key.setup_ssh_key(xen_host, user=xen_host_user,
port=22, password=xen_host_passwd)
utils_misc.add_identities_into_ssh_agent()
if params.get('output_format'):
v2v_params.update({'output_format': params.get('output_format')})
# Build rhev related options
if output_mode == 'rhev':
# Create SASL user on the ovirt host
user_pwd = "[['%s', '%s']]" % (params.get("sasl_user"),
params.get("sasl_pwd"))
v2v_sasl = utils_sasl.SASL(sasl_user_pwd=user_pwd)
v2v_sasl.server_ip = params.get("remote_ip")
v2v_sasl.server_user = params.get('remote_user')
v2v_sasl.server_pwd = params.get('remote_pwd')
v2v_sasl.setup(remote=True)
# Create libvirt dir pool
if output_mode == 'libvirt':
pvt.pre_pool(pool_name, pool_type, pool_target, '')
uri = utils_v2v.Uri('xen').get_uri(xen_host)
# Check if xen guest exists
if not virsh.domain_exists(vm_name, uri=uri):
logging.error('VM %s not exists', vm_name)
virsh_instance = virsh.VirshPersistent()
virsh_instance.set_uri(uri)
if checkpoint in bk_list:
bk_xml = vm_xml.VMXML.new_from_inactive_dumpxml(
vm_name, virsh_instance=virsh_instance)
if checkpoint == 'guest_uuid':
uuid = virsh.domuuid(vm_name, uri=uri).stdout.strip()
v2v_params['main_vm'] = uuid
if checkpoint in ['format_convert', 'xvda_disk']:
# Get remote disk image path
blklist = virsh.domblklist(vm_name, uri=uri).stdout.split('\n')
logging.debug('domblklist %s:\n%s', vm_name, blklist)
for line in blklist:
if line.startswith(('hda', 'vda', 'sda')):
params['remote_disk_image'] = line.split()[-1]
break
# Local path of disk image
params['img_path'] = data_dir.get_tmp_dir() + '/%s.img' % vm_name
if checkpoint == 'xvda_disk':
v2v_params['input_mode'] = 'disk'
v2v_params.update({'input_file': params['img_path']})
# Copy remote image to local with scp
remote.scp_from_remote(xen_host, 22, xen_host_user,
xen_host_passwd,
params['remote_disk_image'],
params['img_path'])
if checkpoint == 'pool_uuid':
virsh.pool_start(pool_name)
pooluuid = virsh.pool_uuid(pool_name).stdout.strip()
v2v_params['storage'] = pooluuid
if checkpoint.startswith('vnc'):
vm_xml.VMXML.set_graphics_attr(vm_name, {'type': 'vnc'},
virsh_instance=virsh_instance)
if checkpoint == 'vnc_autoport':
params[checkpoint] = {'autoport': 'yes'}
vm_xml.VMXML.set_graphics_attr(vm_name, params[checkpoint],
virsh_instance=virsh_instance)
elif checkpoint in ['vnc_encrypt', 'vnc_encrypt_warning']:
params[checkpoint] = {'passwd': params.get('vnc_passwd', 'redhat')}
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(
vm_name, virsh_instance=virsh_instance)
vm_xml.VMXML.add_security_info(
vmxml, params[checkpoint]['passwd'],
virsh_instance=virsh_instance)
logging.debug(virsh_instance.dumpxml(vm_name, extra='--security-info'))
if checkpoint.startswith('libguestfs_backend'):
value = checkpoint[19:]
if value == 'empty':
value = ''
logging.info('Set LIBGUESTFS_BACKEND to "%s"', value)
os.environ['LIBGUESTFS_BACKEND'] = value
if checkpoint == 'same_name':
logging.info('Convert guest and rename to %s', new_vm_name)
v2v_params.update({'new_name': new_vm_name})
if checkpoint == 'no_passwordless_SSH':
logging.info('Unset $SSH_AUTH_SOCK')
os.unsetenv('SSH_AUTH_SOCK')
if checkpoint in ['xml_without_image', 'format_convert']:
xml_file = os.path.join(data_dir.get_tmp_dir(), '%s.xml' % vm_name)
virsh.dumpxml(vm_name, to_file=xml_file, uri=uri)
v2v_params['hypervisor'] = 'kvm'
v2v_params['input_mode'] = 'libvirtxml'
v2v_params.update({'input_file': xml_file})
if params.get('img_path'):
cmd = "sed -i 's|%s|%s|' %s" % (params['remote_disk_image'],
params['img_path'], xml_file)
process.run(cmd)
logging.debug(process.run('cat %s' % xml_file).stdout_text)
if checkpoint == 'format_convert':
v2v_params['output_format'] = 'qcow2'
if checkpoint == 'ssh_banner':
session = remote.remote_login("ssh", xen_host, "22", "root",
xen_host_passwd, "#")
ssh_banner_content = r'"# no default banner path\n' \
r'#Banner /path/banner file\n' \
r'Banner /etc/ssh/ssh_banner"'
logging.info('Create ssh_banner file')
session.cmd('echo -e %s > /etc/ssh/ssh_banner' % ssh_banner_content)
logging.info('Content of ssh_banner file:')
logging.info(session.cmd_output('cat /etc/ssh/ssh_banner'))
logging.info('Restart sshd service on xen host')
session.cmd('service sshd restart')
if checkpoint.startswith('virtio_win'):
src_dir = params.get('virtio_win_dir')
dest_dir = os.path.join(data_dir.get_tmp_dir(), 'virtio-win')
iso_path = os.path.join(dest_dir, 'virtio-win.iso')
if not os.path.exists(dest_dir):
shutil.copytree(src_dir, dest_dir)
virtio_win_env = params.get('virtio_win_env', 'VIRTIO_WIN')
process.run('rpm -e virtio-win')
if process.run('rpm -q virtio-win', ignore_status=True).exit_status == 0:
test.error('not removed')
if checkpoint.endswith('unset'):
logging.info('Unset env %s' % virtio_win_env)
os.unsetenv(virtio_win_env)
if checkpoint.endswith('custom'):
logging.info('Set env %s=%s' % (virtio_win_env, dest_dir))
os.environ[virtio_win_env] = dest_dir
if checkpoint.endswith('iso_mount'):
logging.info('Mount iso to /opt')
process.run('mount %s /opt' % iso_path)
os.environ[virtio_win_env] = '/opt'
if checkpoint.endswith('iso_file'):
logging.info('Set env %s=%s' % (virtio_win_env, iso_path))
os.environ[virtio_win_env] = iso_path
if checkpoint == 'cdrom':
xml = vm_xml.VMXML.new_from_inactive_dumpxml(
vm_name, virsh_instance=virsh_instance)
logging.debug(xml.xmltreefile)
disks = xml.get_disk_all()
logging.debug('Disks: %r', disks)
for disk in list(disks.values()):
# Check if vm has cdrom attached
if disk.get('device') == 'cdrom' and disk.find('source') is None:
test.error('No CDROM image attached')
if checkpoint == 'vdsm':
extra_pkg = params.get('extra_pkg')
logging.info('Install %s', extra_pkg)
utils_package.package_install(extra_pkg.split(','))
# Backup conf file for recovery
for conf in params['bk_conf'].strip().split(','):
logging.debug('Back up %s', conf)
shutil.copyfile(conf, conf + '.bk')
logging.info('Configure libvirt for vdsm')
process.run('vdsm-tool configure --force')
logging.info('Start vdsm service')
service_manager = service.Factory.create_generic_service()
service_manager.start('vdsmd')
# Setup user and password
user_pwd = "[['%s', '%s']]" % (params.get("sasl_user"),
params.get("sasl_pwd"))
v2v_sasl = utils_sasl.SASL(sasl_user_pwd=user_pwd)
v2v_sasl.server_ip = 'localhost'
v2v_sasl.server_user = params.get('sasl_server_user', 'root')
v2v_sasl.server_pwd = params.get('sasl_server_passwd')
v2v_sasl.setup()
v2v_params['sasl_user'] = params.get("sasl_user")
v2v_params['sasl_pwd'] = params.get("sasl_pwd")
if checkpoint == 'multidisk':
params['disk_count'] = 0
blklist = virsh.domblklist(vm_name, uri=uri).stdout.split('\n')
logging.info(blklist)
for line in blklist:
if '/' in line:
params['disk_count'] += 1
logging.info('Total disks: %d', params['disk_count'])
# Check if xen guest exists again
if not virsh.domain_exists(vm_name, uri=uri):
logging.error('VM %s not exists', vm_name)
# Execute virt-v2v
v2v_result = utils_v2v.v2v_cmd(v2v_params)
if new_vm_name:
vm_name = new_vm_name
params['main_vm'] = new_vm_name
check_result(v2v_result, status_error)
finally:
process.run('ssh-agent -k')
if checkpoint == 'vdsm':
logging.info('Stop vdsmd')
service_manager = service.Factory.create_generic_service()
service_manager.stop('vdsmd')
if params.get('extra_pkg'):
utils_package.package_remove(params['extra_pkg'].split(','))
for conf in params['bk_conf'].strip().split(','):
if os.path.exists(conf + '.bk'):
logging.debug('Recover %s', conf)
os.remove(conf)
shutil.move(conf + '.bk', conf)
logging.info('Restart libvirtd')
libvirtd = utils_libvirtd.Libvirtd()
libvirtd.restart()
logging.info('Start network "default"')
virsh.net_start('default')
virsh.undefine(vm_name)
if params.get('vmchecker'):
params['vmchecker'].cleanup()
if output_mode == 'libvirt':
pvt.cleanup_pool(pool_name, pool_type, pool_target, '')
if bk_xml:
bk_xml.sync(virsh_instance=virsh_instance)
virsh_instance.close_session()
if checkpoint == 'ssh_banner':
logging.info('Remove ssh_banner file')
session = remote.remote_login("ssh", xen_host, "22", "root",
xen_host_passwd, "#")
session.cmd('rm -f /etc/ssh/ssh_banner')
session.cmd('service sshd restart')
if checkpoint.startswith('virtio_win'):
utils_package.package_install(['virtio-win'])
def run(test, params, env):
"""
Test the virsh pool commands with acl, initiate a pool then do
following operations.
(1) Undefine a given type pool
(2) Define the pool from xml
(3) Build given type pool
(4) Start pool
(5) Destroy pool
(6) Refresh pool after start it
(7) Run vol-list with the pool
(9) Delete pool
For negative cases, redo failed step to make the case run continue.
Run cleanup at last restore env.
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
# The file for dumped pool xml
pool_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(test.tmpdir, pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
vg_name = pool_name
vol_path = os.path.join(pool_target, vol_name)
define_acl = "yes" == params.get("define_acl", "no")
undefine_acl = "yes" == params.get("undefine_acl", "no")
start_acl = "yes" == params.get("start_acl", "no")
destroy_acl = "yes" == params.get("destroy_acl", "no")
build_acl = "yes" == params.get("build_acl", "no")
delete_acl = "yes" == params.get("delete_acl", "no")
refresh_acl = "yes" == params.get("refresh_acl", "no")
vol_list_acl = "yes" == params.get("vol_list_acl", "no")
src_pool_error = "yes" == params.get("src_pool_error", "no")
define_error = "yes" == params.get("define_error", "no")
undefine_error = "yes" == params.get("undefine_error", "no")
start_error = "yes" == params.get("start_error", "no")
destroy_error = "yes" == params.get("destroy_error", "no")
build_error = "yes" == params.get("build_error", "no")
delete_error = "yes" == params.get("delete_error", "no")
refresh_error = "yes" == params.get("refresh_error", "no")
vol_list_error = "yes" == params.get("vol_list_error", "no")
# Clean up flags:
# cleanup_env[0] for nfs, cleanup_env[1] for iscsi, cleanup_env[2] for lvm
cleanup_env = [False, False, False]
# libvirt acl related params
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current" +
" libvirt version.")
acl_dargs = {
'uri': uri,
'unprivileged_user': unprivileged_user,
'debug': True
}
def check_exit_status(result, expect_error=False):
"""
Check the exit status of virsh commands.
:param result: Virsh command result object
:param expect_error: Boolean value, expect command success or fail
"""
if not expect_error:
if result.exit_status != 0:
raise error.TestFail(result.stderr)
else:
logging.debug("Command output:\n%s", result.stdout.strip())
elif expect_error and result.exit_status == 0:
raise error.TestFail("Expect fail, but run successfully.")
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
result = virsh.pool_list(option, ignore_status=True)
check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)[\ +\n]",
str(result.stdout))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
raise error.TestFail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
raise error.TestFail("Expect pool '%s' doesn't exist." % pool_name)
# Run Testcase
try:
_pool = libvirt_storage.StoragePool()
# Init a pool for test
result = utils_test.libvirt.define_pool(pool_name, pool_type,
pool_target, cleanup_env)
check_exit_status(result, src_pool_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Step (1)
# Undefine pool
if undefine_acl:
result = virsh.pool_undefine(pool_name, **acl_dargs)
else:
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result, undefine_error)
if undefine_error:
check_pool_list(pool_name, "--all", False)
# Redo under negative case to keep case continue
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result)
check_pool_list(pool_name, "--all", True)
else:
check_pool_list(pool_name, "--all", True)
# Step (2)
# Define pool from XML file
if define_acl:
result = virsh.pool_define(pool_xml, **acl_dargs)
else:
result = virsh.pool_define(pool_xml)
check_exit_status(result, define_error)
if define_error:
# Redo under negative case to keep case continue
result = virsh.pool_define(pool_xml)
check_exit_status(result)
# Step (3)
# Buid pool, this step may fail for 'disk' and 'logical' types pool
if pool_type not in ["disk", "logical"]:
option = ""
# Options --overwrite and --no-overwrite can only be used to
# build a filesystem pool, but it will fail for now
# if pool_type == "fs":
# option = '--overwrite'
if build_acl:
result = virsh.pool_build(pool_name, option, **acl_dargs)
else:
result = virsh.pool_build(pool_name,
option,
ignore_status=True)
check_exit_status(result, build_error)
if build_error:
# Redo under negative case to keep case continue
result = virsh.pool_build(pool_name,
option,
ignore_status=True)
check_exit_status(result)
# Step (4)
# Pool start
if start_acl:
result = virsh.pool_start(pool_name, **acl_dargs)
else:
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result, start_error)
if start_error:
# Redo under negative case to keep case continue
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result)
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (5)
# Pool destroy
if destroy_acl:
result = virsh.pool_destroy(pool_name, **acl_dargs)
else:
result = virsh.pool_destroy(pool_name)
if result:
if destroy_error:
raise error.TestFail("Expect fail, but run successfully.")
else:
if not destroy_error:
raise error.TestFail("Pool %s destroy failed, not expected." %
pool_name)
else:
# Redo under negative case to keep case continue
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (6)
# Pool refresh for 'dir' type pool
# Pool start
result = virsh.pool_start(pool_name, ignore_status=True)
check_exit_status(result)
if pool_type == "dir":
os.mknod(vol_path)
if refresh_acl:
result = virsh.pool_refresh(pool_name, **acl_dargs)
else:
result = virsh.pool_refresh(pool_name)
check_exit_status(result, refresh_error)
# Step (7)
# Pool vol-list
if vol_list_acl:
result = virsh.vol_list(pool_name, **acl_dargs)
else:
result = virsh.vol_list(pool_name)
check_exit_status(result, vol_list_error)
# Step (8)
# Pool delete for 'dir' type pool
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
if pool_type == "dir":
if os.path.exists(vol_path):
os.remove(vol_path)
if delete_acl:
result = virsh.pool_delete(pool_name, **acl_dargs)
else:
result = virsh.pool_delete(pool_name, ignore_status=True)
check_exit_status(result, delete_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if not delete_error:
if os.path.exists(pool_target):
raise error.TestFail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_undefine(pool_name, ignore_status=True)
check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
if os.path.exists(pool_xml):
os.remove(pool_xml)
if not _pool.delete_pool(pool_name):
logging.error("Can't delete pool: %s", pool_name)
if cleanup_env[2]:
cmd = "pvs |grep %s |awk '{print $1}'" % vg_name
pv_name = utils.system_output(cmd)
lv_utils.vg_remove(vg_name)
utils.run("pvremove %s" % pv_name)
if cleanup_env[1]:
utils_test.libvirt.setup_or_cleanup_iscsi(False)
if cleanup_env[0]:
utils_test.libvirt.setup_or_cleanup_nfs(False)
def run(test, params, env):
"""
Test the virsh pool commands with acl, initiate a pool then do
following operations.
(1) Undefine a given type pool
(2) Define the pool from xml
(3) Build given type pool
(4) Start pool
(5) Destroy pool
(6) Refresh pool after start it
(7) Run vol-list with the pool
(9) Delete pool
For negative cases, redo failed step to make the case run continue.
Run cleanup at last restore env.
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
# The file for dumped pool xml
pool_xml = os.path.join(test.tmpdir, "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(test.tmpdir, pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
vg_name = pool_name
vol_path = os.path.join(pool_target, vol_name)
define_acl = "yes" == params.get("define_acl", "no")
undefine_acl = "yes" == params.get("undefine_acl", "no")
start_acl = "yes" == params.get("start_acl", "no")
destroy_acl = "yes" == params.get("destroy_acl", "no")
build_acl = "yes" == params.get("build_acl", "no")
delete_acl = "yes" == params.get("delete_acl", "no")
refresh_acl = "yes" == params.get("refresh_acl", "no")
vol_list_acl = "yes" == params.get("vol_list_acl", "no")
list_dumpxml_acl = "yes" == params.get("list_dumpxml_acl", "no")
src_pool_error = "yes" == params.get("src_pool_error", "no")
define_error = "yes" == params.get("define_error", "no")
undefine_error = "yes" == params.get("undefine_error", "no")
start_error = "yes" == params.get("start_error", "no")
destroy_error = "yes" == params.get("destroy_error", "no")
build_error = "yes" == params.get("build_error", "no")
delete_error = "yes" == params.get("delete_error", "no")
refresh_error = "yes" == params.get("refresh_error", "no")
vol_list_error = "yes" == params.get("vol_list_error", "no")
# Clean up flags:
# cleanup_env[0] for nfs, cleanup_env[1] for iscsi, cleanup_env[2] for lvm
# cleanup_env[3] for selinux backup status, cleanup_env[4] for gluster
cleanup_env = [False, False, False, "", False]
# libvirt acl related params
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current"
" libvirt version.")
acl_dargs = {'uri': uri, 'unprivileged_user': unprivileged_user,
'debug': True}
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
if list_dumpxml_acl:
result = virsh.pool_list(option, **acl_dargs)
else:
result = virsh.pool_list(option, ignore_status=True)
utlv.check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)[\ +\n]",
str(result.stdout))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
raise error.TestFail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
raise error.TestFail("Expect pool '%s' doesn't exist." % pool_name)
# Run Testcase
kwargs = {'source_format': params.get('pool_source_format', 'ext4')}
try:
_pool = libvirt_storage.StoragePool()
# Init a pool for test
result = utlv.define_pool(pool_name, pool_type, pool_target,
cleanup_env, **kwargs)
utlv.check_exit_status(result, src_pool_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if list_dumpxml_acl:
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml, **acl_dargs)
else:
xml = virsh.pool_dumpxml(pool_name, to_file=pool_xml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Step (1)
# Undefine pool
if undefine_acl:
result = virsh.pool_undefine(pool_name, **acl_dargs)
else:
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result, undefine_error)
if undefine_error:
check_pool_list(pool_name, "--all", False)
# Redo under negative case to keep case continue
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
else:
check_pool_list(pool_name, "--all", True)
# Step (2)
# Define pool from XML file
if define_acl:
result = virsh.pool_define(pool_xml, **acl_dargs)
else:
result = virsh.pool_define(pool_xml)
utlv.check_exit_status(result, define_error)
if define_error:
# Redo under negative case to keep case continue
result = virsh.pool_define(pool_xml)
utlv.check_exit_status(result)
# Step (3)
# '--overwrite/--no-overwrite' just for fs/disk/logiacl type pool
# disk/fs pool: as prepare step already make label and create filesystem
# for the disk, use '--overwrite' is necessary
# logical_pool: build pool will fail if VG already exist, BZ#1373711
if pool_type != "logical":
option = ''
if pool_type in ['disk', 'fs']:
option = '--overwrite'
result = virsh.pool_build(pool_name, option, ignore_status=True)
utlv.check_exit_status(result)
if build_acl:
result = virsh.pool_build(pool_name, option, **acl_dargs)
else:
result = virsh.pool_build(pool_name, option,
ignore_status=True)
utlv.check_exit_status(result, build_error)
if build_error:
# Redo under negative case to keep case continue
result = virsh.pool_build(pool_name, option,
ignore_status=True)
utlv.check_exit_status(result)
# For iSCSI pool, we need discover targets before start the pool
if pool_type == 'iscsi':
cmd = 'iscsiadm -m discovery -t sendtargets -p 127.0.0.1'
process.run(cmd, shell=True)
# Step (4)
# Pool start
if start_acl:
result = virsh.pool_start(pool_name, **acl_dargs)
else:
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result, start_error)
if start_error:
# Redo under negative case to keep case continue
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (5)
# Pool destroy
if destroy_acl:
result = virsh.pool_destroy(pool_name, **acl_dargs)
else:
result = virsh.pool_destroy(pool_name)
if result:
if destroy_error:
raise error.TestFail("Expect fail, but run successfully.")
else:
if not destroy_error:
raise error.TestFail("Pool %s destroy failed, not expected."
% pool_name)
else:
# Redo under negative case to keep case continue
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
# Step (6)
# Pool refresh for 'dir' type pool
# Pool start
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
if pool_type == "dir":
os.mknod(vol_path)
if refresh_acl:
result = virsh.pool_refresh(pool_name, **acl_dargs)
else:
result = virsh.pool_refresh(pool_name)
utlv.check_exit_status(result, refresh_error)
# Step (7)
# Pool vol-list
if vol_list_acl:
result = virsh.vol_list(pool_name, **acl_dargs)
else:
result = virsh.vol_list(pool_name)
utlv.check_exit_status(result, vol_list_error)
# Step (8)
# Pool delete for 'dir' type pool
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
raise error.TestFail("Destroy pool % failed." % pool_name)
if pool_type == "dir":
if os.path.exists(vol_path):
os.remove(vol_path)
if delete_acl:
result = virsh.pool_delete(pool_name, **acl_dargs)
else:
result = virsh.pool_delete(pool_name, ignore_status=True)
utlv.check_exit_status(result, delete_error)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if not delete_error:
if os.path.exists(pool_target):
raise error.TestFail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
if os.path.exists(pool_xml):
os.remove(pool_xml)
if not _pool.delete_pool(pool_name):
logging.error("Can't delete pool: %s", pool_name)
if cleanup_env[2]:
cmd = "pvs |grep %s |awk '{print $1}'" % vg_name
pv_name = process.system_output(cmd, shell=True)
lv_utils.vg_remove(vg_name)
process.run("pvremove %s" % pv_name, shell=True)
if cleanup_env[1]:
utlv.setup_or_cleanup_iscsi(False)
if cleanup_env[0]:
utlv.setup_or_cleanup_nfs(
False, restore_selinux=cleanup_env[3])
def run(test, params, env):
"""
Test command: virsh pool-define; pool-define-as; pool-start;
vol-list pool; attach-device LUN to guest; mount the device;
dd to the mounted device; unmount; pool-destroy; pool-undefine;
Pre-requiste:
Host needs to have a wwpn and wwnn of a vHBA which is zoned and mapped to
SAN controller.
"""
pool_xml_f = params.get("pool_create_xml_file", "/PATH/TO/POOL.XML")
pool_name = params.get("pool_create_name", "virt_test_pool_tmp")
pre_def_pool = params.get("pre_def_pool", "no")
define_pool = params.get("define_pool", "no")
define_pool_as = params.get("define_pool_as", "no")
pool_create_as = params.get("pool_create_as", "no")
need_pool_build = params.get("need_pool_build", "no")
need_vol_create = params.get("need_vol_create", "no")
pool_type = params.get("pool_type", "dir")
source_format = params.get("pool_src_format", "")
source_name = params.get("pool_source_name", "")
source_path = params.get("pool_source_path", "/")
pool_target = params.get("pool_target", "pool_target")
pool_adapter_type = params.get("pool_adapter_type", "")
pool_adapter_parent = params.get("pool_adapter_parent", "")
target_device = params.get("disk_target_dev", "sdc")
pool_wwnn = params.get("pool_wwnn", "POOL_WWNN_EXAMPLE")
pool_wwpn = params.get("pool_wwpn", "POOL_WWPN_EXAMPLE")
vhba_wwnn = params.get("vhba_wwnn", "VHBA_WWNN_EXAMPLE")
vhba_wwpn = params.get("vhba_wwpn", "VHBA_WWPN_EXAMPLE")
volume_name = params.get("volume_name", "imagefrommapper.qcow2")
volume_capacity = params.get("volume_capacity", '1G')
allocation = params.get("allocation", '1G')
vol_format = params.get("volume_format", 'raw')
attach_method = params.get("attach_method", "hot")
test_unit = None
mount_disk = None
pool_kwargs = {}
pool_extra_args = ""
emulated_image = "emulated-image"
disk_xml = ""
new_vhbas = []
source_dev = ""
mpath_vol_path = ""
old_mpath_conf = ""
mpath_conf_path = "/etc/multipath.conf"
original_mpath_conf_exist = os.path.exists(mpath_conf_path)
if pool_type == "scsi":
if ('EXAMPLE' in pool_wwnn) or ('EXAMPLE' in pool_wwpn):
raise exceptions.TestSkipError(
"No wwpn and wwnn provided for npiv scsi pool.")
if pool_type == "logical":
if ('EXAMPLE' in vhba_wwnn) or ('EXAMPLE' in vhba_wwpn):
raise exceptions.TestSkipError(
"No wwpn and wwnn provided for vhba.")
online_hbas_list = utils_npiv.find_hbas("hba")
logging.debug("The online hbas are: %s", online_hbas_list)
old_mpath_conf = utils_npiv.prepare_multipath_conf(conf_path=mpath_conf_path,
replace_existing=True)
if not online_hbas_list:
raise exceptions.TestSkipError(
"Host doesn't have online hba cards")
old_vhbas = utils_npiv.find_hbas("vhba")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
vmxml_backup = vmxml.copy()
if not vm.is_alive():
vm.start()
libvirt_vm = lib_vm.VM(vm_name, vm.params, vm.root_dir,
vm.address_cache)
pool_ins = libvirt_storage.StoragePool()
if pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("Pool %s already exist" % pool_name)
if pool_type == "scsi":
if define_pool == "yes":
if pool_adapter_parent == "":
pool_adapter_parent = online_hbas_list[0]
pool_kwargs = {'source_path': source_path,
'source_name': source_name,
'source_format': source_format,
'pool_adapter_type': pool_adapter_type,
'pool_adapter_parent': pool_adapter_parent,
'pool_wwnn': pool_wwnn,
'pool_wwpn': pool_wwpn}
elif pool_type == "logical":
if (not vhba_wwnn) or (not vhba_wwpn):
raise exceptions.TestFail("No wwnn/wwpn provided to create vHBA.")
old_mpath_devs = utils_npiv.find_mpath_devs()
new_vhba = utils_npiv.nodedev_create_from_xml({
"nodedev_parent": online_hbas_list[0],
"scsi_wwnn": vhba_wwnn,
"scsi_wwpn": vhba_wwpn})
utils_misc.wait_for(
lambda: utils_npiv.is_vhbas_added(old_vhbas), timeout=_DELAY_TIME*2)
if not new_vhba:
raise exceptions.TestFail("vHBA not sucessfully generated.")
new_vhbas.append(new_vhba)
utils_misc.wait_for(
lambda: utils_npiv.is_mpath_devs_added(old_mpath_devs),
timeout=_DELAY_TIME*5)
if not utils_npiv.is_mpath_devs_added(old_mpath_devs):
raise exceptions.TestFail("mpath dev not generated.")
cur_mpath_devs = utils_npiv.find_mpath_devs()
new_mpath_devs = list(set(cur_mpath_devs).difference(
set(old_mpath_devs)))
logging.debug("The newly added mpath dev is: %s", new_mpath_devs)
source_dev = "/dev/mapper/" + new_mpath_devs[0]
logging.debug("We are going to use \"%s\" as our source device"
" to create a logical pool", source_dev)
try:
cmd = "parted %s mklabel msdos -s" % source_dev
cmd_result = process.run(cmd, shell=True)
except Exception as e:
raise exceptions.TestError("Error occurred when parted mklable")
if define_pool_as == "yes":
pool_extra_args = ""
if source_dev:
pool_extra_args = ' --source-dev %s' % source_dev
elif pool_type == "mpath":
if (not vhba_wwnn) or (not vhba_wwpn):
raise exceptions.TestFail("No wwnn/wwpn provided to create vHBA.")
old_mpath_devs = utils_npiv.find_mpath_devs()
new_vhba = utils_npiv.nodedev_create_from_xml({
"nodedev_parent": online_hbas_list[0],
"scsi_wwnn": vhba_wwnn,
"scsi_wwpn": vhba_wwpn})
utils_misc.wait_for(
lambda: utils_npiv.is_vhbas_added(old_vhbas), timeout=_DELAY_TIME*2)
if not new_vhba:
raise exceptions.TestFail("vHBA not sucessfully generated.")
new_vhbas.append(new_vhba)
utils_misc.wait_for(
lambda: utils_npiv.is_mpath_devs_added(old_mpath_devs),
timeout=_DELAY_TIME*2)
if not utils_npiv.is_mpath_devs_added(old_mpath_devs):
raise exceptions.TestFail("mpath dev not generated.")
cur_mpath_devs = utils_npiv.find_mpath_devs()
new_mpath_devs = list(set(cur_mpath_devs).difference(
set(old_mpath_devs)))
logging.debug("The newly added mpath dev is: %s", new_mpath_devs)
mpath_vol_path = "/dev/mapper/" + new_mpath_devs[0]
try:
cmd = "parted %s mklabel msdos -s" % mpath_vol_path
cmd_result = process.run(cmd, shell=True)
except Exception as e:
raise exceptions.TestError("Error occurred when parted mklable")
if pre_def_pool == "yes":
try:
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(pool_name, pool_type,
pool_target, emulated_image,
**pool_kwargs)
utils_misc.wait_for(
lambda: utils_npiv.is_vhbas_added(old_vhbas),
_DELAY_TIME*2)
virsh.pool_dumpxml(pool_name, to_file=pool_xml_f)
virsh.pool_destroy(pool_name)
except Exception as e:
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image, **pool_kwargs)
raise exceptions.TestError(
"Error occurred when prepare pool xml:\n %s" % e)
if os.path.exists(pool_xml_f):
with open(pool_xml_f, 'r') as f:
logging.debug("Create pool from file: %s", f.read())
try:
# define/create/start the pool
if (pre_def_pool == "yes") and (define_pool == "yes"):
pool_define_status = virsh.pool_define(pool_xml_f,
ignore_status=True,
debug=True)
utlv.check_exit_status(pool_define_status)
if define_pool_as == "yes":
pool_define_as_status = virsh.pool_define_as(
pool_name, pool_type,
pool_target, pool_extra_args,
ignore_status=True, debug=True
)
utlv.check_exit_status(pool_define_as_status)
if pool_create_as == "yes":
if pool_type != "scsi":
raise exceptions.TestSkipError("pool-create-as only needs to "
"be covered by scsi pool for "
"NPIV test.")
cmd = "virsh pool-create-as %s %s \
--adapter-wwnn %s --adapter-wwpn %s \
--adapter-parent %s --target %s"\
% (pool_name, pool_type, pool_wwnn, pool_wwpn,
online_hbas_list[0], pool_target)
cmd_status = process.system(cmd, verbose=True)
if cmd_status:
raise exceptions.TestFail("pool-create-as scsi pool failed.")
if need_pool_build == "yes":
pool_build_status = virsh.pool_build(pool_name, "--overwrite")
utlv.check_exit_status(pool_build_status)
pool_ins = libvirt_storage.StoragePool()
if not pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("define or create pool failed.")
else:
if not pool_ins.is_pool_active(pool_name):
pool_start_status = virsh.pool_start(pool_name)
utlv.check_exit_status(pool_start_status)
utlv.check_actived_pool(pool_name)
pool_detail = libvirt_xml.PoolXML.get_pool_details(pool_name)
logging.debug("Pool detail: %s", pool_detail)
# create vol if required
if need_vol_create == "yes":
vol_create_as_status = virsh.vol_create_as(
volume_name, pool_name,
volume_capacity, allocation,
vol_format, "", debug=True
)
utlv.check_exit_status(vol_create_as_status)
virsh.pool_refresh(pool_name)
vol_list = utlv.get_vol_list(pool_name, vol_check=True,
timeout=_DELAY_TIME*3)
logging.debug('Volume list is: %s' % vol_list)
# use test_unit to save the first vol in pool
if pool_type == "mpath":
cmd = "virsh vol-list %s | grep \"%s\" |\
awk '{FS=\" \"} {print $1}'" % (pool_name, mpath_vol_path)
cmd_result = process.run(cmd, shell=True)
status = cmd_result.exit_status
output = cmd_result.stdout_text.strip()
if cmd_result.exit_status:
raise exceptions.TestFail("vol-list pool %s failed", pool_name)
if not output:
raise exceptions.TestFail("Newly added mpath dev not in pool.")
test_unit = output
logging.info(
"Using %s to attach to a guest", test_unit)
else:
test_unit = list(vol_list.keys())[0]
logging.info(
"Using the first volume %s to attach to a guest", test_unit)
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
session = vm.wait_for_login()
output = session.cmd_status_output('lsblk')
logging.debug("%s", output[1])
old_count = vmxml.get_disk_count(vm_name)
bf_disks = libvirt_vm.get_disks()
# prepare disk xml which will be hot/cold attached to vm
disk_params = {'type_name': 'volume', 'target_dev': target_device,
'target_bus': 'virtio', 'source_pool': pool_name,
'source_volume': test_unit, 'driver_type': vol_format}
disk_xml = os.path.join(data_dir.get_tmp_dir(), 'disk_xml.xml')
lun_disk_xml = utlv.create_disk_xml(disk_params)
copyfile(lun_disk_xml, disk_xml)
disk_xml_str = open(lun_disk_xml).read()
logging.debug("The disk xml is: %s", disk_xml_str)
# hot attach disk xml to vm
if attach_method == "hot":
copyfile(lun_disk_xml, disk_xml)
dev_attach_status = virsh.attach_device(vm_name, disk_xml,
debug=True)
# Pool/vol virtual disk is not supported by mpath pool yet.
if dev_attach_status.exit_status and pool_type == "mpath":
raise exceptions.TestSkipError("mpath pool vol is not "
"supported in virtual disk yet,"
"the error message is: %s",
dev_attach_status.stderr)
session.close()
utlv.check_exit_status(dev_attach_status)
# cold attach disk xml to vm
elif attach_method == "cold":
if vm.is_alive():
vm.destroy(gracefully=False)
new_disk = disk.Disk()
new_disk.xml = disk_xml_str
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
vmxml.devices = vmxml.devices.append(new_disk)
vmxml.sync()
logging.debug(vmxml)
try:
vm.start()
except virt_vm.VMStartError as e:
logging.debug(e)
if pool_type == "mpath":
raise exceptions.TestSkipError("'mpath' pools for backing "
"'volume' disks isn't "
"supported for now")
else:
raise exceptions.TestFail("Failed to start vm")
session = vm.wait_for_login()
else:
pass
# checking attached disk in vm
logging.info("Checking disk availability in domain")
if not vmxml.get_disk_count(vm_name):
raise exceptions.TestFail("No disk in domain %s." % vm_name)
new_count = vmxml.get_disk_count(vm_name)
if new_count <= old_count:
raise exceptions.TestFail(
"Failed to attach disk %s" % lun_disk_xml)
logging.debug("Disks before attach: %s", bf_disks)
af_disks = libvirt_vm.get_disks()
logging.debug("Disks after attach: %s", af_disks)
mount_disk = "".join(list(set(bf_disks) ^ set(af_disks)))
if not mount_disk:
raise exceptions.TestFail("Can not get attached device in vm.")
logging.debug("Attached device in vm:%s", mount_disk)
logging.debug("Creating file system for %s", mount_disk)
output = session.cmd_status_output(
'echo yes | mkfs.ext4 %s' % mount_disk)
logging.debug("%s", output[1])
if mount_disk:
mount_success = mount_and_dd(session, mount_disk)
if not mount_success:
raise exceptions.TestFail("Mount failed")
else:
raise exceptions.TestFail("Partition not available for disk")
logging.debug("Unmounting disk")
session.cmd_status_output('umount %s' % mount_disk)
output = session.cmd_status_output('mount')
logging.debug("%s", output[1])
mount_success = mount_and_dd(session, mount_disk)
if not mount_success:
raise exceptions.TestFail("Mount failed")
logging.debug("Unmounting disk")
session.cmd_status_output('umount %s' % mount_disk)
session.close()
# detach disk from vm
dev_detach_status = virsh.detach_device(vm_name, disk_xml,
debug=True)
utlv.check_exit_status(dev_detach_status)
finally:
vm.destroy(gracefully=False)
vmxml_backup.sync()
logging.debug('Destroying pool %s', pool_name)
virsh.pool_destroy(pool_name)
logging.debug('Undefining pool %s', pool_name)
virsh.pool_undefine(pool_name)
if os.path.exists(pool_xml_f):
os.remove(pool_xml_f)
if os.path.exists(disk_xml):
data_dir.clean_tmp_files()
logging.debug("Cleanup disk xml")
if pre_def_pool == "yes":
# Do not apply cleanup_pool for logical pool, logical pool will
# be cleaned below
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image, **pool_kwargs)
if (test_unit and
(need_vol_create == "yes" and (pre_def_pool == "no")) and
(pool_type == "logical")):
process.system('lvremove -f %s/%s' % (pool_name, test_unit),
verbose=True)
process.system('vgremove -f %s' % pool_name, verbose=True)
process.system('pvremove -f %s' % source_dev, verbose=True)
if new_vhbas:
utils_npiv.vhbas_cleanup(new_vhbas)
# Restart multipathd, this is to avoid bz1399075
if source_dev:
utils_misc.wait_for(lambda: utils_npiv.restart_multipathd(source_dev),
_DELAY_TIME*5, 0.0, 5.0)
elif mpath_vol_path:
utils_misc.wait_for(lambda: utils_npiv.restart_multipathd(mpath_vol_path),
_DELAY_TIME*5, 0.0, 5.0)
else:
utils_npiv.restart_multipathd()
if old_mpath_conf:
utils_npiv.prepare_multipath_conf(conf_path=mpath_conf_path,
conf_content=old_mpath_conf,
replace_existing=True)
if not original_mpath_conf_exist and os.path.exists(mpath_conf_path):
os.remove(mpath_conf_path)
--adapter-parent %s --target %s"\
% (pool_name, pool_type, pool_wwnn, pool_wwpn,
online_hbas_list[0], pool_target)
cmd_status = process.system(cmd, verbose=True)
if cmd_status:
raise exceptions.TestFail("pool-create-as scsi pool failed.")
if need_pool_build == "yes":
pool_build_status = virsh.pool_build(pool_name, "--overwrite")
utlv.check_exit_status(pool_build_status)
pool_ins = libvirt_storage.StoragePool()
if not pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("define or create pool failed.")
else:
if not pool_ins.is_pool_active(pool_name):
pool_start_status = virsh.pool_start(pool_name)
utlv.check_exit_status(pool_start_status)
utlv.check_actived_pool(pool_name)
pool_detail = libvirt_xml.PoolXML.get_pool_details(pool_name)
logging.debug("Pool detail: %s", pool_detail)
# create vol if required
if need_vol_create == "yes":
vol_create_as_status = virsh.vol_create_as(
volume_name, pool_name,
volume_capacity, allocation,
vol_format, "", debug=True
)
utlv.check_exit_status(vol_create_as_status)
virsh.pool_refresh(pool_name)
vol_list = utlv.get_vol_list(pool_name, vol_check=True,
define_pool(pool_name, pool_type, pool_target)
# Step (2)
result = virsh.pool_undefine(pool_name, ignore_status=True)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-undefine failed:\n%s" %
result.stdout)
else:
logging.debug("Pool: %s successfully undefined", pool_name)
shutil.rmtree(pool_target)
# Step (3)
define_pool(pool_name, pool_type, pool_target)
# Step (4)
result = virsh.pool_start(pool_name, ignore_status=True)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-start failed:\n%s" %
result.stdout)
else:
logging.debug("Pool: %s successfully started", pool_name)
# Step (5)
if not check_list_state(pool_name, "active"):
raise error.TestFail("State of the pool: %s is marked inactive"
"instead of active" % pool_name)
if not check_list_autostart(pool_name, "no"):
raise error.TestFail("Autostart of the pool: %s marked as yes"
"instead of no" % pool_name)
raise exceptions.TestError(
"Error occurred when prepare pool xml:\n %s" % e)
if os.path.exists(pool_xml_f):
f = open(pool_xml_f, 'r')
try:
logging.debug("Create pool from file:\n %s", f.read())
finally:
f.close()
try:
cmd_result = virsh.pool_define(pool_xml_f,
ignore_status=True,
debug=True)
utlv.check_exit_status(cmd_result)
cmd_result = virsh.pool_start(pool_name)
utlv.check_exit_status(cmd_result)
utlv.check_actived_pool(pool_name)
pool_detail = libvirt_xml.PoolXML.get_pool_details(pool_name)
logging.debug("Pool detail: %s", pool_detail)
vol_list = utlv.get_vol_list(pool_name, timeout=10)
test_unit = vol_list.keys()[0]
logging.info("Using the first LUN unit %s to attach to a guest",
test_unit)
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
session = vm.wait_for_login()
output = session.cmd_status_output('lsblk')
logging.debug("%s", output[1])
old_count = vmxml.get_disk_count(vm_name)
def run(test, params, env):
"""
Test command: virsh pool-define;pool-start;vol-list pool;
attach-device LUN to guest; mount the device, dd; unmount;
reboot guest; mount the device, dd again; pool-destroy; pool-undefine;
Create a libvirt npiv pool from an XML file. The test needs to have a wwpn
and wwnn of a vhba in host which is zoned & mapped to a SAN controller.
Pre-requiste:
Host needs to have a wwpn and wwnn of a vHBA which is zoned and mapped to
SAN controller.
"""
pool_xml_f = params.get("pool_create_xml_file", "/PATH/TO/POOL.XML")
pool_name = params.get("pool_create_name", "virt_test_pool_tmp")
pre_def_pool = "yes" == params.get("pre_def_pool", "no")
pool_type = params.get("pool_type", "dir")
source_format = params.get("pool_src_format", "")
source_name = params.get("pool_source_name", "")
source_path = params.get("pool_source_path", "/")
pool_target = params.get("pool_target", "pool_target")
pool_adapter_type = params.get("pool_adapter_type", "")
pool_adapter_parent = params.get("pool_adapter_parent", "")
target_device = params.get("pool_target_device", "sdc")
pool_wwnn = params.get("pool_wwnn", "WWNN_EXAMPLE")
pool_wwpn = params.get("pool_wwpn", "WWPN_EXAMPLE")
test_unit = None
mount_disk = None
if 'EXAMPLE' in pool_wwnn or 'EXAMPLE' in pool_wwpn:
raise exceptions.TestSkipError("Please provide proper WWPN/WWNN")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
if not vm.is_alive():
vm.start()
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
vmxml_backup = vmxml.copy()
libvirt_vm = lib_vm.VM(vm_name, vm.params, vm.root_dir,
vm.address_cache)
pool_ins = libvirt_storage.StoragePool()
if pre_def_pool and pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("Pool %s already exist" % pool_name)
online_hbas_list = nodedev.find_hbas("hba")
logging.debug("The online hbas are: %s", online_hbas_list)
# if no online hba cards on host test fails
if not online_hbas_list:
raise exceptions.TestSkipError("Host doesn't have online hba cards")
else:
if pool_adapter_parent == "":
pool_adapter_parent = online_hbas_list[0]
kwargs = {'source_path': source_path,
'source_name': source_name,
'source_format': source_format,
'pool_adapter_type': pool_adapter_type,
'pool_adapter_parent': pool_adapter_parent,
'pool_wwnn': pool_wwnn,
'pool_wwpn': pool_wwpn}
pvt = utlv.PoolVolumeTest(test, params)
emulated_image = "emulated-image"
old_vhbas = nodedev.find_hbas("vhba")
try:
pvt.pre_pool(pool_name, pool_type, pool_target, emulated_image,
**kwargs)
utils_misc.wait_for(
lambda: nodedev.is_vhbas_added(old_vhbas), _DELAY_TIME)
virsh.pool_dumpxml(pool_name, to_file=pool_xml_f)
virsh.pool_destroy(pool_name)
except Exception as e:
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image, **kwargs)
raise exceptions.TestError(
"Error occurred when prepare pool xml:\n %s" % e)
if os.path.exists(pool_xml_f):
with open(pool_xml_f, 'r') as f:
logging.debug("Create pool from file:\n %s", f.read())
try:
cmd_result = virsh.pool_define(pool_xml_f, ignore_status=True,
debug=True)
utlv.check_exit_status(cmd_result)
cmd_result = virsh.pool_start(pool_name)
utlv.check_exit_status(cmd_result)
utlv.check_actived_pool(pool_name)
pool_detail = libvirt_xml.PoolXML.get_pool_details(pool_name)
logging.debug("Pool detail: %s", pool_detail)
vol_list = utlv.get_vol_list(pool_name, timeout=10)
test_unit = list(vol_list.keys())[0]
logging.info(
"Using the first LUN unit %s to attach to a guest", test_unit)
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
session = vm.wait_for_login()
output = session.cmd_status_output('lsblk')
logging.debug("%s", output[1])
old_count = vmxml.get_disk_count(vm_name)
bf_disks = libvirt_vm.get_disks()
disk_params = {'type_name': 'volume', 'target_dev': target_device,
'target_bus': 'virtio', 'source_pool': pool_name,
'source_volume': test_unit, 'driver_type': 'raw'}
disk_xml = os.path.join(data_dir.get_tmp_dir(), 'disk_xml.xml')
lun_disk_xml = utlv.create_disk_xml(disk_params)
copyfile(lun_disk_xml, disk_xml)
attach_success = virsh.attach_device(
vm_name, disk_xml, debug=True)
utlv.check_exit_status(attach_success)
virsh.reboot(vm_name, debug=True)
logging.info("Checking disk availability in domain")
if not vmxml.get_disk_count(vm_name):
raise exceptions.TestFail("No disk in domain %s." % vm_name)
new_count = vmxml.get_disk_count(vm_name)
if new_count <= old_count:
raise exceptions.TestFail(
"Failed to attach disk %s" % lun_disk_xml)
session = vm.wait_for_login()
output = session.cmd_status_output('lsblk')
logging.debug("%s", output[1])
logging.debug("Disks before attach: %s", bf_disks)
af_disks = libvirt_vm.get_disks()
logging.debug("Disks after attach: %s", af_disks)
mount_disk = "".join(list(set(bf_disks) ^ set(af_disks)))
if not mount_disk:
raise exceptions.TestFail("Can not get attached device in vm.")
logging.debug("Attached device in vm:%s", mount_disk)
logging.debug("Creating file system for %s", mount_disk)
output = session.cmd_status_output(
'echo yes | mkfs.ext4 %s' % mount_disk)
logging.debug("%s", output[1])
if mount_disk:
mount_success = mount_and_dd(session, mount_disk)
if not mount_success:
raise exceptions.TestFail("Mount failed")
else:
raise exceptions.TestFail("Partition not available for disk")
logging.debug("Unmounting disk")
session.cmd_status_output('umount %s' % mount_disk)
virsh.reboot(vm_name, debug=True)
session = vm.wait_for_login()
output = session.cmd_status_output('mount')
logging.debug("%s", output[1])
mount_success = mount_and_dd(session, mount_disk)
if not mount_success:
raise exceptions.TestFail("Mount failed")
logging.debug("Unmounting disk")
session.cmd_status_output('umount %s' % mount_disk)
session.close()
detach_status = virsh.detach_device(vm_name, disk_xml,
debug=True)
utlv.check_exit_status(detach_status)
finally:
vm.destroy(gracefully=False)
vmxml_backup.sync()
logging.debug('Destroying pool %s', pool_name)
virsh.pool_destroy(pool_name)
logging.debug('Undefining pool %s', pool_name)
virsh.pool_undefine(pool_name)
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image, **kwargs)
if os.path.exists(pool_xml_f):
os.remove(pool_xml_f)
if os.path.exists(disk_xml):
logging.debug("Cleanup disk xml")
data_dir.clean_tmp_files()
def run(test, params, env):
"""
Test the virsh pool commands
(1) Define a given type pool
(2) List pool with '--inactive --type' options
(3) Dumpxml for the pool
(4) Undefine the pool
(5) Define pool by using the XML file in step (3)
(6) Build the pool(except 'disk' type pool
For 'fs' type pool, cover --overwrite and --no-overwrite options
(7) Start the pool
(8) List pool with '--persistent --type' options
(9) Mark pool autostart
(10) List pool with '--autostart --type' options
(11) Restart libvirtd and list pool with '--autostart --persistent' options
(12) Destroy the pool
(13) Unmark pool autostart
(14) Repeat step (11)
(15) Start the pool
(16) Get pool info
(17) Get pool uuid by name
(18) Get pool name by uuid
(19) Refresh the pool
For 'dir' type pool, touch a file under target path and refresh again
to make the new file show in vol-list.
(20) Check pool 'Capacity', 'Allocation' and 'Available'
Create a over size vol in pool(expect fail), then check these values
(21) Undefine the pool, and this should fail as pool is still active
(22) Destroy the pool
(23) Delete pool for 'dir' type pool. After the command, the pool object
will still exist but target path will be deleted
(24) Undefine the pool
"""
# Initialize the variables
pool_name = params.get("pool_name", "temp_pool_1")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target", "")
source_format = params.get("source_format", "")
source_name = params.get("pool_source_name", "gluster-vol1")
source_path = params.get("pool_source_path", "/")
new_pool_name = params.get("new_pool_name", "")
build_option = params.get("build_option", "")
same_source_test = "yes" == params.get("same_source_test", "no")
customize_initiator_iqn = "yes" == params.get("customize_initiator_iqn", "no")
# The file for dumped pool xml
poolxml = os.path.join(data_dir.get_tmp_dir(), "pool.xml.tmp")
if os.path.dirname(pool_target) is "":
pool_target = os.path.join(data_dir.get_tmp_dir(), pool_target)
vol_name = params.get("vol_name", "temp_vol_1")
# Use pool name as VG name
status_error = "yes" == params.get("status_error", "no")
vol_path = os.path.join(pool_target, vol_name)
ip_protocal = params.get('ip_protocal', 'ipv4')
if not libvirt_version.version_compare(1, 0, 0):
if pool_type == "gluster":
test.cancel("Gluster pool is not supported in current"
" libvirt version.")
def check_pool_list(pool_name, option="--all", expect_error=False):
"""
Check pool by running pool-list command with given option.
:param pool_name: Name of the pool
:param option: option for pool-list command
:param expect_error: Boolean value, expect command success or fail
"""
found = False
# Get the list stored in a variable
result = virsh.pool_list(option, ignore_status=True)
utlv.check_exit_status(result, False)
output = re.findall(r"(\S+)\ +(\S+)\ +(\S+)",
str(result.stdout.strip()))
for item in output:
if pool_name in item[0]:
found = True
break
if found:
logging.debug("Find pool '%s' in pool list.", pool_name)
else:
logging.debug("Not find pool %s in pool list.", pool_name)
if expect_error and found:
test.fail("Unexpect pool '%s' exist." % pool_name)
if not expect_error and not found:
test.fail("Expect pool '%s' doesn't exist." % pool_name)
def check_vol_list(vol_name, pool_name):
"""
Check volume from the list
:param vol_name: Name of the volume
:param pool_name: Name of the pool
"""
found = False
# Get the volume list stored in a variable
result = virsh.vol_list(pool_name, ignore_status=True)
utlv.check_exit_status(result)
output = re.findall(r"(\S+)\ +(\S+)", str(result.stdout.strip()))
for item in output:
if vol_name in item[0]:
found = True
break
if found:
logging.debug(
"Find volume '%s' in pool '%s'.", vol_name, pool_name)
else:
test.fail(
"Not find volume '%s' in pool '%s'." %
(vol_name, pool_name))
def is_in_range(actual, expected, error_percent):
deviation = 100 - (100 * (float(actual) / float(expected)))
logging.debug("Deviation: %0.2f%%", float(deviation))
return float(deviation) <= float(error_percent)
def check_pool_info(pool_info, check_point, value):
"""
Check the pool name, uuid, etc.
:param pool_info: A dict include pool's information
:param key: Key of pool info dict, available value: Name, UUID, State
Persistent, Autostart, Capacity, Allocation, Available
:param value: Expect value of pool_info[key]
"""
if pool_info is None:
test.fail("Pool info dictionary is needed.")
val_tup = ('Capacity', 'Allocation', 'Available')
if check_point in val_tup and float(value.split()[0]):
# As from bytes to GiB, could cause deviation, and it should not
# exceed 1 percent.
if is_in_range(float(pool_info[check_point].split()[0]),
float(value.split()[0]), 1):
logging.debug("Pool '%s' is '%s'.", check_point, value)
else:
test.fail("Pool '%s' isn't '%s'." %
(check_point, value))
else:
if pool_info[check_point] == value:
logging.debug("Pool '%s' is '%s'.", check_point, value)
else:
test.fail("Pool '%s' isn't '%s'." %
(check_point, value))
# Stop multipathd to avoid start pool fail(For fs like pool, the new add
# disk may in use by device-mapper, so start pool will report disk already
# mounted error).
multipathd = service.Factory.create_service("multipathd")
multipathd_status = multipathd.status()
if multipathd_status:
multipathd.stop()
# Run Testcase
pvt = utlv.PoolVolumeTest(test, params)
emulated_image = "emulated-image"
kwargs = {'image_size': '1G', 'pre_disk_vol': ['100M'],
'source_name': source_name, 'source_path': source_path,
'source_format': source_format, 'persistent': True,
'ip_protocal': ip_protocal}
try:
_pool = libvirt_storage.StoragePool()
# Step (1)
# Pool define
pvt.pre_pool(pool_name, pool_type, pool_target, emulated_image,
**kwargs)
# Step (2)
# Pool list
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (3)
# Pool dumpxml
xml = virsh.pool_dumpxml(pool_name, to_file=poolxml)
logging.debug("Pool '%s' XML:\n%s", pool_name, xml)
# Update pool name
if new_pool_name:
if "/" in new_pool_name:
new_pool_name = new_pool_name.replace("/", "\/")
logging.debug(new_pool_name)
p_xml = pool_xml.PoolXML.new_from_dumpxml(pool_name)
p_xml.name = new_pool_name
del p_xml.uuid
poolxml = p_xml.xml
logging.debug("XML after update pool name:\n%s" % p_xml)
# Update host name
if same_source_test:
s_xml = p_xml.get_source()
s_xml.host_name = "192.168.1.1"
p_xml.set_source(s_xml)
poolxml = p_xml.xml
logging.debug("XML after update host name:\n%s" % p_xml)
if customize_initiator_iqn:
initiator_iqn = params.get("initiator_iqn",
"iqn.2018-07.com.virttest:pool.target")
p_xml = pool_xml.PoolXML.new_from_dumpxml(pool_name)
s_node = p_xml.xmltreefile.find('/source')
i_node = ET.SubElement(s_node, 'initiator')
ET.SubElement(i_node, 'iqn', {'name': initiator_iqn})
p_xml.xmltreefile.write()
poolxml = p_xml.xml
logging.debug('XML after add Multi-IQN:\n%s' % p_xml)
# Step (4)
# Undefine pool
if not same_source_test:
result = virsh.pool_undefine(pool_name)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
# Step (5)
# Define pool from XML file
result = virsh.pool_define(poolxml, debug=True)
# Give error msg when exit status is not expected
if "/" in new_pool_name and not result.exit_status:
error_msg = "https://bugzilla.redhat.com/show_bug.cgi?id=639923 "
error_msg += "is helpful for tracing this bug."
logging.error(error_msg)
if "." in new_pool_name and result.exit_status:
error_msg = "https://bugzilla.redhat.com/show_bug.cgi?id=1333248 "
error_msg += "is helpful for tracing this bug."
logging.error(error_msg)
if same_source_test and not result.exit_status:
error_msg = "https://bugzilla.redhat.com/show_bug.cgi?id=1171984 "
error_msg += "is helpful for tracing this bug."
logging.error(error_msg)
utlv.check_exit_status(result, status_error)
if not result.exit_status:
# Step (6)
# Buid pool
# '--overwrite/--no-overwrite' just for fs/disk/logiacl type pool
# disk/fs pool: as prepare step already make label and create filesystem
# for the disk, use '--overwrite' is necessary
# logical_pool: build pool will fail if VG already exist, BZ#1373711
if new_pool_name:
pool_name = new_pool_name
if pool_type != "logical":
result = virsh.pool_build(pool_name, build_option, ignore_status=True)
utlv.check_exit_status(result)
# Step (7)
# Pool start
result = virsh.pool_start(pool_name, debug=True, ignore_status=True)
utlv.check_exit_status(result)
# Step (8)
# Pool list
option = "--persistent --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (9)
# Pool autostart
result = virsh.pool_autostart(pool_name, ignore_status=True)
utlv.check_exit_status(result)
# Step (10)
# Pool list
option = "--autostart --type %s" % pool_type
check_pool_list(pool_name, option)
# Step (11)
# Restart libvirtd and check the autostart pool
utils_libvirtd.libvirtd_restart()
option = "--autostart --persistent"
check_pool_list(pool_name, option)
# Step (12)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
test.fail("Destroy pool % failed." % pool_name)
# Step (13)
# Pool autostart disable
result = virsh.pool_autostart(pool_name, "--disable",
ignore_status=True)
utlv.check_exit_status(result)
# Step (14)
# Repeat step (11)
utils_libvirtd.libvirtd_restart()
option = "--autostart"
check_pool_list(pool_name, option, True)
# Step (15)
# Pool start
# When libvirtd starts up, it'll check to see if any of the storage
# pools have been activated externally. If so, then it'll mark the
# pool as active. This is independent of autostart.
# So a directory based storage pool is thus pretty much always active,
# and so as the SCSI pool.
if pool_type not in ["dir", 'scsi']:
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result)
# Step (16)
# Pool info
pool_info = _pool.pool_info(pool_name)
logging.debug("Pool '%s' info:\n%s", pool_name, pool_info)
# Step (17)
# Pool UUID
result = virsh.pool_uuid(pool_info["Name"], ignore_status=True)
utlv.check_exit_status(result)
check_pool_info(pool_info, "UUID", result.stdout.strip())
# Step (18)
# Pool Name
result = virsh.pool_name(pool_info["UUID"], ignore_status=True)
utlv.check_exit_status(result)
check_pool_info(pool_info, "Name", result.stdout.strip())
# Step (19)
# Pool refresh for 'dir' type pool
if pool_type == "dir":
os.mknod(vol_path)
result = virsh.pool_refresh(pool_name)
utlv.check_exit_status(result)
check_vol_list(vol_name, pool_name)
# Step (20)
# Create an over size vol in pool(expect fail), then check pool:
# 'Capacity', 'Allocation' and 'Available'
# For NFS type pool, there's a bug(BZ#1077068) about allocate volume,
# and glusterfs pool not support create volume, so not test them
if pool_type != "netfs":
vol_capacity = "10000G"
vol_allocation = "10000G"
result = virsh.vol_create_as("oversize_vol", pool_name,
vol_capacity, vol_allocation, "raw")
utlv.check_exit_status(result, True)
new_info = _pool.pool_info(pool_name)
check_items = ["Capacity", "Allocation", "Available"]
for i in check_items:
check_pool_info(pool_info, i, new_info[i])
# Step (21)
# Undefine pool, this should fail as the pool is active
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result, expect_error=True)
check_pool_list(pool_name, "", False)
# Step (22)
# Pool destroy
if virsh.pool_destroy(pool_name):
logging.debug("Pool %s destroyed.", pool_name)
else:
test.fail("Destroy pool % failed." % pool_name)
# Step (23)
# Pool delete for 'dir' type pool
if pool_type == "dir":
for f in os.listdir(pool_target):
os.remove(os.path.join(pool_target, f))
result = virsh.pool_delete(pool_name, ignore_status=True)
utlv.check_exit_status(result)
option = "--inactive --type %s" % pool_type
check_pool_list(pool_name, option)
if os.path.exists(pool_target):
test.fail("The target path '%s' still exist." %
pool_target)
result = virsh.pool_start(pool_name, ignore_status=True)
utlv.check_exit_status(result, True)
# Step (24)
# Pool undefine
result = virsh.pool_undefine(pool_name, ignore_status=True)
utlv.check_exit_status(result)
check_pool_list(pool_name, "--all", True)
finally:
# Clean up
try:
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image, **kwargs)
utlv.setup_or_cleanup_iscsi(False)
except exceptions.TestFail as detail:
logging.error(str(detail))
if multipathd_status:
multipathd.start()
if os.path.exists(poolxml):
os.remove(poolxml)
