def test_vtn_vbr_vlanmap_no_vlanid_multi_controller():
print "TEST 6 : VTenant with one VBridge one VLANMAP with vlan_id and logicalport_id"
print "then update vlan_id to no_vlan_id with multi-controller"
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 6 :Controller1 Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
retval = controller.add_controller_ex('ControllerSecond')
if retval != 0:
print "TEST 6 :Controller2 Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerSecond',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR1 Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "VBR3 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
if retval != 0:
print "VLANMAP1 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=1)
if retval != 0:
print "VLANMAP2 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=1)
if retval != 0:
print "After Create VLANMAP1 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=1)
if retval != 0:
print "After Create VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=2)
if retval != 0:
print "VLANMAP1 upadte Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapTwo',update_id=2)
if retval != 0:
print "VLANMAP2 upadte Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed at controller1"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
if retval != 0:
print "VTN Validate Failed at controller2"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
if retval != 0:
print "VLANMAP1 Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=1)
if retval != 0:
print "VLANMAP3 Delete Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=1)
if retval != 0:
print "After Delete VLANMAP1 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',presence="no",position=0,no_vlan_id=1)
if retval != 0:
print "After Delete VLANMAP3 Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
if retval != 0:
print "VBR1/VTN Delete Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
if retval != 0:
print "VBR3/VTN Delete Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
if retval != 0:
print "After Delete VBR1 Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
if retval != 0:
print "After Delete VBR3 Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted at controller1"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted at controller2"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER1 delete failed"
exit(1)
retval=controller.delete_controller_ex('ControllerSecond')
if retval != 0:
print "CONTROLLER2 delete failed"
exit(1)
print "VTN->VBR->VLANMAP with vlan_id->no_vlan_id with multi-controller TEST SUCCESS"
def test_vtn_vbr_multi_vlanmap_multi_controller():
print "TEST 3 : VTenant with one VBridge two VLANMAP with multi-controller"
print "CREATE Controller1"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 3 :Controller1 Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
print "CREATE Controller2"
retval = controller.add_controller_ex('ControllerSecond')
if retval != 0:
print "TEST 3 :Controller2 Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerSecond',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBROne Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "VBRTwo Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
if retval != 0:
print "VLANMAP1 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapThree',no_vlan=0)
if retval != 0:
print "VLANMAP3 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',position=0,no_vlan_id=0)
if retval != 0:
print "After Create VLANMAP1 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapThree','ControllerSecond',position=0,no_vlan_id=0)
if retval != 0:
print "After Create VLANMAP3 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=0)
if retval != 0:
print "VLANMAP1 update Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapThree',update_id=0)
if retval != 0:
print "VLANMAP3 update Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
if retval != 0:
print "VLANMAP2 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapFour',no_vlan=1)
if retval != 0:
print "VLANMAP2 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',position=0,no_vlan_id=1)
if retval != 0:
print "After Create VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapFour','ControllerSecond',position=0,no_vlan_id=1)
if retval != 0:
print "After Create VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapTwo',update_id=1)
if retval != 0:
print "VLANMAP2 upadte Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapFour',update_id=1)
if retval != 0:
print "VLANMAP2 upadte Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
if retval != 0:
print "VLANMAP1 Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
if retval != 0:
print "VLANMAP2 Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapThree',no_vlan=0)
if retval != 0:
print "VLANMAP3 Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapFour',no_vlan=1)
if retval != 0:
print "VLANMAP4 Delete Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
if retval != 0:
print "After Delete VLANMAP1 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',presence="no",position=1,no_vlan_id=1)
if retval != 0:
print "After Delete VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapThree','ControllerSecond',presence="no",position=0,no_vlan_id=0)
if retval != 0:
print "After Delete VLANMAP3 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapFour','ControllerSecond',presence="no",position=0,no_vlan_id=1)
if retval != 0:
print "After Delete VLANMAP4 Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
if retval != 0:
print "After Delete VBROne Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
if retval != 0:
print "After Delete VBRTwo Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER1"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER1 delete failed"
exit(1)
print "DELETE CONTROLLER2"
retval=controller.delete_controller_ex('ControllerSecond')
if retval != 0:
print "CONTROLLER2 delete failed"
exit(1)
print "VTN->VBR->TWO VLANMAP with multi_controller TEST SUCCESS"
def test_vtn_vbr_vlanmap_multi_controller():
print "TEST 1 : VTenant with one VBridge one VLANMAP without vlan_id and logicalport_id with multi-controller"
print "CREATE Controller1"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 1 :Controller Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
print "CREATE Controller2"
retval = controller.add_controller_ex('ControllerSecond')
if retval != 0:
print "TEST 1 :Controller Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerSecond',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "VBR Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
if retval != 0:
print "VLANMAP Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=0)
if retval != 0:
print "VLANMAP Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=0)
if retval != 0:
print "After Create VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=0)
if retval != 0:
print "After Create VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=0)
if retval != 0:
print "VLANMAP update Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapTwo',update_id=0)
if retval != 0:
print "VLANMAP update Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
if retval != 0:
print "VLANMAP Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=0)
if retval != 0:
print "VLANMAP Delete Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
if retval != 0:
print "After Delete VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerSecond',presence="no",position=0,no_vlan_id=0)
if retval != 0:
print "After Delete VLANMAP Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
if retval != 0:
print "After Delete VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
if retval != 0:
print "After Delete VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER1"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "DELETE CONTROLLER2"
retval=controller.delete_controller_ex('ControllerSecond')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VTN->VBR->VLANMAP no vlan_id with multi-controller TEST SUCCESS"
def test_vtn_vbr_vlanmap_no_vlanid_multi_controller():
print "TEST 6 : VTenant with one VBridge one VLANMAP with vlan_id and logicalport_id"
print "then update vlan_id to no_vlan_id with multi-controller"
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 6 :Controller1 Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
retval = controller.add_controller_ex('ControllerSecond')
if retval != 0:
print "TEST 6 :Controller2 Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerSecond',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR1 Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "VBR3 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
if retval != 0:
print "VLANMAP1 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=1)
if retval != 0:
print "VLANMAP2 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=1)
if retval != 0:
print "After Create VLANMAP1 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=1)
if retval != 0:
print "After Create VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=2)
if retval != 0:
print "VLANMAP1 upadte Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapTwo',update_id=2)
if retval != 0:
print "VLANMAP2 upadte Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=1)
if retval != 0:
print "After update VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=1)
if retval != 0:
print "After update VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed at controller1"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
if retval != 0:
print "VTN Validate Failed at controller2"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
if retval != 0:
print "VLANMAP1 Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=1)
if retval != 0:
print "VLANMAP3 Delete Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=1)
if retval != 0:
print "After Delete VLANMAP1 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',presence="no",position=0,no_vlan_id=1)
if retval != 0:
print "After Delete VLANMAP3 Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
if retval != 0:
print "VBR1/VTN Delete Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
if retval != 0:
print "VBR3/VTN Delete Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
if retval != 0:
print "After Delete VBR1 Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
if retval != 0:
print "After Delete VBR3 Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted at controller1"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted at controller2"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER1 delete failed"
exit(1)
retval=controller.delete_controller_ex('ControllerSecond')
if retval != 0:
print "CONTROLLER2 delete failed"
exit(1)
print "VTN->VBR->VLANMAP with vlan_id->no_vlan_id with multi-controller TEST SUCCESS"
def test_vtn_vbr_multi_vlanmap_multi_controller():
print "TEST 3 : VTenant with one VBridge two VLANMAP with multi-controller"
print "CREATE Controller1"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 3 :Controller1 Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
print "CREATE Controller2"
retval = controller.add_controller_ex('ControllerSecond')
if retval != 0:
print "TEST 3 :Controller2 Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerSecond',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBROne Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "VBRTwo Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
if retval != 0:
print "VLANMAP1 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapThree',no_vlan=0)
if retval != 0:
print "VLANMAP3 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',position=0,no_vlan_id=0)
if retval != 0:
print "After Create VLANMAP1 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapThree','ControllerSecond',position=0,no_vlan_id=0)
if retval != 0:
print "After Create VLANMAP3 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=0)
if retval != 0:
print "VLANMAP1 update Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapThree',update_id=0)
if retval != 0:
print "VLANMAP3 update Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrOne','VlanmapOne','ControllerFirst',position=0,no_vlan_id=0)
if retval != 0:
print "After update VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrThree','VlanmapThree','ControllerSecond',position=0,no_vlan_id=0)
if retval != 0:
print "After update VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
if retval != 0:
print "VLANMAP2 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapFour',no_vlan=1)
if retval != 0:
print "VLANMAP2 Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',position=1,no_vlan_id=1)
if retval != 0:
print "After Create VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapFour','ControllerSecond',position=1,no_vlan_id=1)
if retval != 0:
print "After Create VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapTwo',update_id=1)
if retval != 0:
print "VLANMAP2 upadte Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapFour',update_id=1)
if retval != 0:
print "VLANMAP2 upadte Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',position=1,no_vlan_id=1)
if retval != 0:
print "After update VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrThree','VlanmapFour','ControllerSecond',position=1,no_vlan_id=1)
if retval != 0:
print "After update VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
if retval != 0:
print "VLANMAP1 Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
if retval != 0:
print "VLANMAP2 Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapThree',no_vlan=0)
if retval != 0:
print "VLANMAP3 Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapFour',no_vlan=1)
if retval != 0:
print "VLANMAP4 Delete Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
if retval != 0:
print "After Delete VLANMAP1 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',presence="no",position=1,no_vlan_id=1)
if retval != 0:
print "After Delete VLANMAP2 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapThree','ControllerSecond',presence="no",position=0,no_vlan_id=0)
if retval != 0:
print "After Delete VLANMAP3 Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapFour','ControllerSecond',presence="no",position=1,no_vlan_id=1)
if retval != 0:
print "After Delete VLANMAP4 Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
if retval != 0:
print "After Delete VBROne Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
if retval != 0:
print "After Delete VBRTwo Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER1"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER1 delete failed"
exit(1)
print "DELETE CONTROLLER2"
retval=controller.delete_controller_ex('ControllerSecond')
if retval != 0:
print "CONTROLLER2 delete failed"
exit(1)
print "VTN->VBR->TWO VLANMAP with multi_controller TEST SUCCESS"
def test_vtn_vbr_vlanmap_multi_controller():
print "TEST 1 : VTenant with one VBridge one VLANMAP without vlan_id and logicalport_id with multi-controller"
print "CREATE Controller1"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 1 :Controller Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
print "CREATE Controller2"
retval = controller.add_controller_ex('ControllerSecond')
if retval != 0:
print "TEST 1 :Controller Create Failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerSecond',"up")
if retval != 0:
print "Controller state check failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "VBR Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
if retval != 0:
print "VLANMAP Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=0)
if retval != 0:
print "VLANMAP Create Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=0)
if retval != 0:
print "After Create VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=0)
if retval != 0:
print "After Create VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=0)
if retval != 0:
print "VLANMAP update Failed"
exit(1)
retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapTwo',update_id=0)
if retval != 0:
print "VLANMAP update Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=0)
if retval != 0:
print "After update VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=0)
if retval != 0:
print "After update VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
if retval != 0:
print "VLANMAP Delete Failed"
exit(1)
retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=0)
if retval != 0:
print "VLANMAP Delete Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
if retval != 0:
print "After Delete VLANMAP Validate Failed"
exit(1)
retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerSecond',presence="no",position=0,no_vlan_id=0)
if retval != 0:
print "After Delete VLANMAP Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
if retval != 0:
print "After Delete VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
if retval != 0:
print "After Delete VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER1"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "DELETE CONTROLLER2"
retval=controller.delete_controller_ex('ControllerSecond')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VTN->VBR->VLANMAP no vlan_id with multi-controller TEST SUCCESS"
