def test_github(self): result = get_username(VALID_GITHUB_SSH_URL) self.assertEqual(result, "wercker") result = get_username(VALID_GITHUB_HTTPS_URL) self.assertEqual(result, "wercker")
def test_bitbucket(self): result = get_username(VALID_BITBUCKET_SSH_URL) self.assertEqual(result, "postmodern") result = get_username(VALID_BITBUCKET_HTTPS_URL) self.assertEqual(result, "postmodern")
def create(path=".", valid_token=None): if not valid_token: raise ValueError("A valid token is required!") term = get_term() if get_value(VALUE_PROJECT_ID, print_warnings=False): puts("A .wercker file was found.") run_create = prompt.yn("Are you sure you want to run `wercker create`?", default="n") if run_create is False: puts("Aborting.") return else: puts("") if project_link(valid_token=valid_token, puts_result=False, auto_link=False): puts("A matching application was found on wercker.") use_link = prompt.yn( "Do you want to run 'wercker link' instead of\ `wercker create`?" ) puts("") if use_link is True: project_link(valid_token=valid_token) return path = find_git_root(path) if path: options = get_remote_options(path) heroku_options = filter_heroku_sources(options) else: options = [] heroku_options = [] if not path: return False puts( """About to create an application on wercker. This consists of the following steps: 1. Configure application 2. Setup keys 3. Add a deploy target ({heroku_options} heroku targets detected) 4. Trigger initial build""".format( wercker_url=get_value(VALUE_WERCKER_URL), heroku_options=len(heroku_options) ) ) if not path: puts( term.red("Error:") + " Could not find a repository." + " wercker create requires a git repository. Create/clone a\ repository first." ) return options = [o for o in options if o not in heroku_options] options = [o for o in options if o.priority > 1] count = len(options) puts( """ Step """ + term.white("1") + """. Configure application ------------- """ ) puts("%s repository location(s) found...\n" % term.bold(str(count))) url = pick_url(options) url = convert_to_url(url) source = get_preferred_source_type(url) puts("\n%s repository detected..." % source) puts("Selected repository url is %s\n" % url) client = Client() code, profile = client.get_profile(valid_token) source_type = get_source_type(url) if source_type == SOURCE_BITBUCKET: if profile.get("hasBitbucketToken", False) is False: puts( "No Bitbucket account linked with your profile. Wercker uses\ this connection to linkup some events for your repository on Bitbucket to our\ service." ) provider_url = get_value(VALUE_WERCKER_URL) + "/provider/add/cli/bitbucket" puts("Launching {url} to start linking.".format(url=provider_url)) from time import sleep sleep(5) import webbrowser webbrowser.open(provider_url) raw_input("Press enter to continue...") elif source_type == SOURCE_GITHUB: if profile.get("hasGithubToken", False) is False: puts( "No GitHub account linked with your profile. Wercker uses\ this connection to linkup some events for your repository on GitHub to our\ service." ) provider_url = get_value(VALUE_WERCKER_URL) + "/provider/add/cli/github" puts("Launching {url} to start linking.".format(url=provider_url)) from time import sleep sleep(5) import webbrowser webbrowser.open(provider_url) raw_input("Press enter to continue...") username = get_username(url) project = get_project(url) puts( """ Step {t.white}2{t.normal}. ------------- In order to clone the repository on wercker, an ssh key is needed. A new/unique key can be generated for each repository. There 3 ways of using ssh keys on wercker: {t.green}1. Automatically add a deploy key [recommended]{t.normal} 2. Use the checkout key, wercker uses for public projects. 3. Let wercker generate a key, but allow add it manually to github/bitbucket. (needed when using git submodules) For more information on this see: http://etc... """.format( t=term ) ) key_method = None while True: result = prompt.get_value_with_default("Options:", "1") valid_values = [str(i + 1) for i in range(3)] if result in valid_values: key_method = valid_values.index(result) break else: puts(term.red("warning: ") + " invalid build selected.") checkout_key_id = None checkout_key_publicKey = None if key_method != 1: puts("""Retrieving a new ssh-key.""") status, response = client.create_checkout_key() puts("done.") if status == 200: checkout_key_id = response["id"] checkout_key_publicKey = response["publicKey"] if key_method == 0: puts("Adding deploy key to repository:") status, response = client.link_checkout_key( valid_token, checkout_key_id, username, project, source_type ) if status != 200: puts(term.red("Error:") + " uanble to add key to repository.") sys.exit(1) elif key_method == 2: profile_username = profile.get("username") status, response = client.get_profile_detailed(valid_token, profile_username) username = response[source_type + "Username"] url = None if source_type == SOURCE_GITHUB: url = "https://github.com/settings/ssh" elif source_type == SOURCE_BITBUCKET: url = "http://bitbucket.org/account/user/{username}/\ ssh-keys/" if status == 200: formatted_key = "\n".join(textwrap.wrap(checkout_key_publicKey)) puts( """Please add the following public key: {publicKey} You can add the key here: {url}\n""".format( publicKey=formatted_key, url=url.format(username=username) ) ) raw_input("Press enter to continue...") else: puts(term.red("Error:") + " unable to load wercker profile information.") sys.exit(1) else: puts(term.red("Error:") + "unable to retrieve an ssh key.") sys.exit(1) puts("Creating a new application") status, response = client.create_project(valid_token, username, project, source, checkout_key_id) if response["success"]: puts("done.\n") set_value(VALUE_PROJECT_ID, response["data"]["id"]) puts( "In the root of this repository a .wercker file has been created\ which enables the link between the source code and wercker.\n" ) site_url = None if source_type == SOURCE_GITHUB: site_url = "https://github.com/" + username + "/" + project elif source_type == SOURCE_BITBUCKET: site_url = "https://bitbucket.org/" + username + "/" + project puts( """ Step """ + term.white("3") + """. ------------- """ ) target_options = heroku_options nr_targets = len(target_options) puts("%s automatic supported target(s) found." % str(nr_targets)) if nr_targets: target_add(valid_token=valid_token) puts( """ Step """ + term.white("4") + """. ------------- """ ) project_build(valid_token=valid_token) puts( """ Done. ------------- You are all set up to for using wercker. You can trigger new builds by committing and pushing your latest changes. Happy coding!""" ) else: puts(term.red("Error: ") + "Unable to create project. \n\nResponse: %s\n" % (response.get("errorMessage"))) puts( """ Note: only repository where the wercker's user has permissions on can be added. This is because some event hooks for wercker need to be registered on the repository. If you want to test a public repository and don't have permissions on it: fork it. You can add the forked repository to wercker""" )
def create(path='.', valid_token=None): if not valid_token: raise ValueError("A valid token is required!") term = get_term() if get_value(VALUE_PROJECT_ID, print_warnings=False): puts("A .wercker file was found.") run_create = prompt.yn( "Are you sure you want to run `wercker create`?", default="n") if run_create is False: puts("Aborting.") return else: puts("") if project_link( valid_token=valid_token, puts_result=False, auto_link=False ): puts("A matching application was found on wercker.") use_link = prompt.yn("Do you want to run 'wercker link' instead of\ `wercker create`?") puts("") if use_link is True: project_link(valid_token=valid_token) return path = find_git_root(path) if path: options = get_remote_options(path) heroku_options = filter_heroku_sources(options) else: options = [] heroku_options = [] if not path: return False puts('''About to create an application on wercker. This consists of the following steps: 1. Validate permissions and create an application 2. Add a deploy target ({heroku_options} heroku targets detected) 3. Trigger initial build'''.format( wercker_url=get_value(VALUE_WERCKER_URL), heroku_options=len(heroku_options)) ) if not path: puts( term.red("Error:") + " Could not find a repository." + " wercker create requires a git repository. Create/clone a\ repository first." ) return options = [o for o in options if o not in heroku_options] options = [o for o in options if o.priority > 1] count = len(options) puts(''' Step ''' + term.white('1') + '''. ------------- ''') puts( "Found %s repository location(s)...\n" % term.white(str(count)) ) url = pick_url(options) url = convert_to_url(url) source = get_preferred_source_type(url) puts("\n%s repository detected..." % source) puts("Selected repository url is %s\n" % url) client = Client() code, profile = client.get_profile(valid_token) source_type = get_source_type(url) if source_type == SOURCE_BITBUCKET: if profile.get('hasBitbucketToken', False) is False: puts("No Bitbucket account linked with your profile. Wercker uses\ this connection to linkup some events for your repository on Bitbucket to our\ service.") provider_url = get_value( VALUE_WERCKER_URL ) + '/provider/add/cli/bitbucket' puts("Launching {url} to start linking.".format( url=provider_url )) from time import sleep sleep(5) import webbrowser webbrowser.open(provider_url) raw_input("Press enter to continue...") elif source_type == SOURCE_GITHUB: if profile.get('hasGithubToken', False) is False: puts("No GitHub account linked with your profile. Wercker uses\ this connection to linkup some events for your repository on GitHub to our\ service.") provider_url = get_value( VALUE_WERCKER_URL ) + '/provider/add/cli/github' puts("Launching {url} to start linking.".format( url=provider_url )) from time import sleep sleep(5) import webbrowser webbrowser.open(provider_url) raw_input("Press enter to continue...") puts("Creating a new application") status, response = client.create_project( url, source, valid_token ) if response['success']: puts("a new application has been created.") set_value(VALUE_PROJECT_ID, response['projectId']) puts("In the root of this repository a .wercker file has been created\ which enables the link between the source code and wercker.\n") site_url = None if source_type == SOURCE_GITHUB: site_url = "https://github.com/" + \ get_username(url) + \ "/" + \ get_project(url) elif source_type == SOURCE_BITBUCKET: site_url = "https://bitbucket.org/" + \ get_username(url) + \ "/" + \ get_project(url) project_check_repo( valid_token=valid_token, failure_confirmation=True, site_url=site_url ) # puts("\nSearching for deploy target information (for \ # platforms such as Heroku).") puts(''' Step ''' + term.white('2') + '''. ------------- ''') target_options = heroku_options nr_targets = len(target_options) puts("%s automatic supported target(s) found." % str(nr_targets)) if nr_targets: target_add(valid_token=valid_token) puts(''' Step ''' + term.white('3') + '''. ------------- ''') project_build(valid_token=valid_token) # if project_build(valid_token=valid_token): # puts("To trigger a build") # puts("") puts(''' Done. ------------- You are all set up to for using wercker. You can trigger new builds by committing and pushing your latest changes. Happy coding!''') else: puts( term.red("Error: ") + "Unable to create project. \n\nResponse: %s\n" % (response.get('errorMessage')) ) puts(''' Note: only repository where the wercker's user has permissions on can be added. This is because some event hooks for wercker need to be registered on the repository. If you want to test a public repository and don't have permissions on it: fork it. You can add the forked repository to wercker''')
def create(path='.', valid_token=None): if not valid_token: raise ValueError("A valid token is required!") term = get_term() if get_value(VALUE_PROJECT_ID, print_warnings=False): puts("A .wercker file was found.") run_create = prompt.yn( "Are you sure you want to run `wercker create`?", default="n") if run_create is False: puts("Aborting.") return else: puts("") if project_link( valid_token=valid_token, puts_result=False, auto_link=False ): puts("A matching application was found on wercker.") use_link = prompt.yn("Do you want to run 'wercker link' instead of\ `wercker create`?") puts("") if use_link is True: project_link(valid_token=valid_token) return path = find_git_root(path) if path: options = get_remote_options(path) heroku_options = filter_heroku_sources(options) else: options = [] heroku_options = [] if not path: return False puts('''About to create an application on wercker. This consists of the following steps: 1. Configure application 2. Setup keys 3. Add a deploy target ({heroku_options} heroku targets detected) 4. Trigger initial build'''.format( wercker_url=get_value(VALUE_WERCKER_URL), heroku_options=len(heroku_options)) ) if not path: puts( term.red("Error:") + " Could not find a repository." + " wercker create requires a git repository. Create/clone a\ repository first." ) return options = [o for o in options if o not in heroku_options] options = [o for o in options if o.priority > 1] count = len(options) puts(''' Step ''' + term.white('1') + '''. Configure application ------------- ''') puts( "%s repository location(s) found...\n" % term.bold(str(count)) ) url = pick_url(options) url = convert_to_url(url) source = get_preferred_source_type(url) puts("\n%s repository detected..." % source) puts("Selected repository url is %s\n" % url) client = Client() code, profile = client.get_profile(valid_token) source_type = get_source_type(url) if source_type == SOURCE_BITBUCKET: if profile.get('hasBitbucketToken', False) is False: puts("No Bitbucket account linked with your profile. Wercker uses\ this connection to linkup some events for your repository on Bitbucket to our\ service.") provider_url = get_value( VALUE_WERCKER_URL ) + '/provider/add/cli/bitbucket' puts("Launching {url} to start linking.".format( url=provider_url )) from time import sleep sleep(5) import webbrowser webbrowser.open(provider_url) raw_input("Press enter to continue...") elif source_type == SOURCE_GITHUB: if profile.get('hasGithubToken', False) is False: puts("No GitHub account linked with your profile. Wercker uses\ this connection to linkup some events for your repository on GitHub to our\ service.") provider_url = get_value( VALUE_WERCKER_URL ) + '/provider/add/cli/github' puts("Launching {url} to start linking.".format( url=provider_url )) from time import sleep sleep(5) import webbrowser webbrowser.open(provider_url) raw_input("Press enter to continue...") username = get_username(url) project = get_project(url) puts(''' Step {t.white}2{t.normal}. ------------- In order to clone the repository on wercker, an ssh key is needed. A new/unique key can be generated for each repository. There 3 ways of using ssh keys on wercker: {t.green}1. Automatically add a deploy key [recommended]{t.normal} 2. Use the checkout key, wercker uses for public projects. 3. Let wercker generate a key, but allow add it manually to github/bitbucket. (needed when using git submodules) For more information on this see: http://etc... '''.format(t=term)) key_method = None while(True): result = prompt.get_value_with_default( "Options:", '1' ) valid_values = [str(i + 1) for i in range(3)] if result in valid_values: key_method = valid_values.index(result) break else: puts(term.red("warning: ") + " invalid build selected.") checkout_key_id = None checkout_key_publicKey = None if(key_method != 1): puts('''Retrieving a new ssh-key.''') status, response = client.create_checkout_key() puts("done.") if status == 200: checkout_key_id = response['id'] checkout_key_publicKey = response['publicKey'] if key_method == 0: puts('Adding deploy key to repository:') status, response = client.link_checkout_key(valid_token, checkout_key_id, username, project, source_type) if status != 200: puts(term.red("Error:") + " uanble to add key to repository.") sys.exit(1) elif key_method == 2: profile_username = profile.get('username') status, response = client.get_profile_detailed( valid_token, profile_username) username = response[source_type + 'Username'] url = None if source_type == SOURCE_GITHUB: url = "https://github.com/settings/ssh" elif source_type == SOURCE_BITBUCKET: url = "http://bitbucket.org/account/user/{username}/\ ssh-keys/" if status == 200: formatted_key = "\n".join( textwrap.wrap(checkout_key_publicKey)) puts('''Please add the following public key: {publicKey} You can add the key here: {url}\n'''.format(publicKey=formatted_key, url=url.format( username=username))) raw_input("Press enter to continue...") else: puts(term.red("Error:") + " unable to load wercker profile information.") sys.exit(1) else: puts(term.red("Error:") + 'unable to retrieve an ssh key.') sys.exit(1) puts("Creating a new application") status, response = client.create_project( valid_token, username, project, source, checkout_key_id, ) if response['success']: puts("done.\n") set_value(VALUE_PROJECT_ID, response['data']['id']) puts("In the root of this repository a .wercker file has been created\ which enables the link between the source code and wercker.\n") site_url = None if source_type == SOURCE_GITHUB: site_url = "https://github.com/" + \ username + \ "/" + \ project elif source_type == SOURCE_BITBUCKET: site_url = "https://bitbucket.org/" + \ username + \ "/" + \ project puts(''' Step ''' + term.white('3') + '''. ------------- ''') target_options = heroku_options nr_targets = len(target_options) puts("%s automatic supported target(s) found." % str(nr_targets)) if nr_targets: target_add(valid_token=valid_token) puts(''' Step ''' + term.white('4') + '''. ------------- ''') project_build(valid_token=valid_token) puts(''' Done. ------------- You are all set up to for using wercker. You can trigger new builds by committing and pushing your latest changes. Happy coding!''') else: puts( term.red("Error: ") + "Unable to create project. \n\nResponse: %s\n" % (response.get('errorMessage')) ) puts(''' Note: only repository where the wercker's user has permissions on can be added. This is because some event hooks for wercker need to be registered on the repository. If you want to test a public repository and don't have permissions on it: fork it. You can add the forked repository to wercker''')