def readDesignerMethod(self, meth, codeBody):
""" Create a new ObjectCollection by parsing the given method body """
from Views import ObjCollection
import methodparse
# Collection method
if ObjCollection.isInitCollMeth(meth):
ctrlName = methodparse.ctrlNameFromMeth(meth)
try:
res = Utils.split_seq(codeBody, '', string.strip)
inits, body, fins = res[:3]
except ValueError:
raise Exception, _(
'Collection body %s not in init, body, fin form') % meth
allInitialisers, unmatched = methodparse.parseMixedBody(\
[methodparse.EventParse, methodparse.CollectionItemInitParse],body)
creators = allInitialisers.get(methodparse.CollectionItemInitParse,
[])
collectionInits = []
properties = []
events = allInitialisers.get(methodparse.EventParse, [])
methodparse.decorateParseItems(creators + events, ctrlName,
self.main)
# Normal method
else:
inits = []
fins = []
allInitialisers, unmatched = methodparse.parseMixedBody(\
[methodparse.ConstructorParse, methodparse.EventParse,
methodparse.CollectionInitParse, methodparse.PropertyParse],
codeBody)
creators = allInitialisers.get(methodparse.ConstructorParse, [])
collectionInits = allInitialisers.get(
methodparse.CollectionInitParse, [])
properties = allInitialisers.get(methodparse.PropertyParse, [])
events = allInitialisers.get(methodparse.EventParse, [])
newObjColl = ObjCollection.ObjectCollection()
newObjColl.setup(creators, properties, events, collectionInits, inits,
fins)
if unmatched:
wx.LogWarning(_('The following lines were not used by the Designer '\
'and will be lost:\n'))
for line in unmatched:
wx.LogWarning(line)
wx.LogWarning(_('\nThere were unprocessed lines in the source code of '\
'method: %s\nIf this was unexpected, it is advised '\
'that you cancel this Designer session and correct '\
'the problem before continuing.')%meth)
return newObjColl
def writeCollectionItems(self, output, stripFrmId=''):
CollectionIddDTC.writeCollectionItems(self, output, stripFrmId)
warn = 0
for constr in self.textConstrLst:
if constr.params.has_key('control') and constr.params['control'] == 'None':
wx.LogWarning(_("Invalid None control for toolbar %s's AddControl")%(
self.parentCompanion.name))
warn = 1
if warn:
wx.LogWarning(_('Control may not be None or the generated source will '
'be invalid outside the Designer.'))
def on_btn_airmon_check(self, event):
if self.iface is not None:
if self.iface.modo == 'monitor':
wx.LogDebug(self.iface.optimize())
if self.iface.is_optimized:
wx.LogDebug(
"El modo monitor esta funcionando correctamente")
else:
wx.LogWarning(
"Debes activar el modo monitor antes de usar esta opcion")
else:
wx.LogWarning("Primero debes seleccionar una interfaz")
def writeCollectionItems(self, output, stripFrmId=''):
CollectionDTC.writeCollectionItems(self, output, stripFrmId)
warn = 0
for constr in self.textConstrLst:
if constr.params['page'] == 'None':
wx.LogWarning('No control for %s, page %s'%(
self.parentCompanion.name, constr.params['text']))
warn = 1
if warn:
wx.LogWarning(_('The red-dashed area of a %s page must contain\n'\
'a control or the generated source will be invalid outside the '\
'Designer')% self.parentCompanion.bookCtrlName)
def writeCollectionItems(self, output, stripFrmId=''):
CollectionDTC.writeCollectionItems(self, output, stripFrmId)
warn = 0
for constr in self.textConstrLst:
if constr.params[0] == 'None':
wx.LogWarning(
_('No control/sizer for sizer item of %s') %
(self.parentCompanion.name))
warn = 1
if warn:
wx.LogWarning(
_('None values are only valid in the Designer.\n'
'The generated source will be invalid outside the '
'Designer and should be fixed before executing.'))
def InitLanguage(self):
langsAvail = {
"System default": self.sysLng,
"English": wx.LANGUAGE_ENGLISH,
"French": wx.LANGUAGE_FRENCH,
"German": wx.LANGUAGE_GERMAN,
"Italian": wx.LANGUAGE_ITALIAN,
}
sel = wx.GetSingleChoice("Please choose language:", "Language",
list(langsAvail.keys()))
if sel == "":
sel = "System default"
lang = langsAvail[sel]
# We don't have to do anything if the selected language is english
# As the strings of this app have been written in this lang
if lang == wx.LANGUAGE_ENGLISH:
return
wx.Locale.AddCatalogLookupPathPrefix("../langs")
self.locale = wx.Locale()
if not self.locale.Init(lang):
wx.LogWarning("This language is not supported by the system.")
if not self.locale.AddCatalog("internat"):
wx.LogError(
"Couldn't find/load the 'internat' catalog for locale '" +
self.locale.GetCanonicalName() + "'.")
def cyclops(self, args='', execStart=None, execFinish=None):
""" Run the saved application thru Cyclops """
if self.savedAs:
cwd = os.path.abspath(os.getcwd())
filename = self.assertLocalFile()
os.chdir(os.path.dirname(filename))
page = ''
try:
name = os.path.basename(filename)
report = tempfile.mktemp()
# execute Cyclops in Python with module as parameter
command = '"%s" "%s" "%s" "%s"' % (
Preferences.getPythonInterpreterPath(),
Utils.toPyPath('RunCyclops.py'), name, report)
wx.Execute(command, True)
# read report that Cyclops generated
page = open(report, 'r').read()
os.remove(report)
finally:
os.chdir(cwd)
return page
else:
wx.LogWarning(_('Save before running Cyclops'))
raise Exception, _('Not saved yet!')
def debug(self, params=None, cont_if_running=0, cont_always=0,
temp_breakpoint=None):
app = self.findAppInModules(params)
if app:
app.debug(params, cont_if_running, cont_always, temp_breakpoint)
else:
wx.LogWarning('No Application module found in modules list to link to')
def run(self, args='', execStart=None, execFinish=None):
app = self.findAppInModules(args)
if app:
app.run(args, execStart, execFinish)
else:
wx.LogWarning(
'No Application module found in modules list to link to')
def on_btn_airmon_toggle(self, event):
if self.combo_iface.Selection > 0:
wx.LogDebug(self.iface.airmon_toggle())
self.update_ifaces()
else:
wx.LogWarning(
"Debes seleccionar una tarjeta antes de usar esta opcion")
def on_btn_run_reaver(self, event):
if self.parent.iface_name is None:
wx.LogWarning("Debes seleccionar una interfaz de red")
else:
cmd = self.get_command()
self.reaver.set_comando(cmd)
self.reaver.start()
self.read_logfile()
def on_btn_new_reaver_config(self, event):
nombre = wx.GetTextFromUser("Introduce un nombre: ", "Crear nueva configuración", parent=self)
if nombre != "":
nuevo, created = ReaverConfig.get_or_create(name=nombre)
if created:
nuevo.save()
self.load_reaver_configs()
else:
wx.LogWarning("Ya existe un perfil con este nombre")
def _getValidFilename(self, filename):
protsplit = filename.split('://')
if len(protsplit) > 1:
if protsplit[0] != 'file' or len(protsplit) > 2:
wx.LogWarning(
_('%s not searched, only local files allowed') % filename)
return ''
return protsplit[1]
return filename
def deleteItems(self, names):
for name in names:
try:
del self.entries[name]
except KeyError:
wx.LogWarning(
_('Could not find %s in %s for deletion') %
(name, self.entries.keys()))
self.updateConfig()
def on_btn_select_iface(self, event):
if self.iface is not None:
if self.iface.modo == 'monitor':
if self.iface.is_optimized:
self.iface_name = self.iface.name
self.SetStatusText(self.iface_name, 1)
self.SetStatusWidths([-1, 100])
wx.LogDebug(self.iface.ifconfig_up())
else:
txt = "La interfaz no esta optimizada, usa el boton 'Optimizar interfaz'."
wx.LogStatus(txt)
txt += "\nEl boton 'optimizar' desactivará servicios de red usados por el sistema. "
wx.LogWarning(txt)
else:
wx.LogWarning(
"Activa el modo monitor antes de usar esta opcion")
else:
wx.LogWarning("Primero debes seleccionar una interfaz")
def importTransport(moduleName):
try:
__import__(moduleName, globals())
except ImportError, error:
if Preferences.pluginErrorHandling == 'raise':
raise
wx.LogWarning(_('%s not installed: %s') % (moduleName, str(error)))
ExplorerNodes.failedModules[moduleName] = str(error)
return True
def on_btn_saveas_reaver_config(self, event):
nombre = wx.GetTextFromUser("Introduce un nombre: ", "Guardar como...", parent=self)
if nombre != "":
nuevo, created = ReaverConfig.get_or_create(name=nombre)
if created:
nuevo.update_info(self._get_opciones)
nuevo.save()
self.load_reaver_configs()
else:
wx.LogWarning("Ya existe un perfil con este nombre")
def on_btn_scan(self, event):
self.lista_redes.DeleteAllItems()
if self.iface_name is not None:
timeout = self.spin_timeout.GetValue()
channel = self.combo_canal.GetSelection()
self.wash.configure(self.iface_name, timeout, channel)
if not self.wash.is_alive:
self.wash.start()
else:
wx.LogWarning("No hay ninguna interfaz configurada")
def ConvertImgToPy(imgPath, editor):
funcName = fileNameToFunctionName(
os.path.basename(os.path.splitext(imgPath)[0]))
pyResPath, ok = editor.saveAsDlg(funcName + '_img.py')
if ok:
if pyResPath.find('://') != -1:
pyResPath = pyResPath.split('://', 1)[1]
# snip script usage, leave only options
docs = img2py.__doc__[img2py.__doc__.find('Options:') + 11:]
cmdLine = zopt + '-n %s' % (funcName)
if os.path.exists(pyResPath):
cmdLine = '-a ' + cmdLine
dlg = wx.TextEntryDialog(
editor,
_('Options:\n\n%s\n\nEdit options string:') % docs, 'img2py',
cmdLine)
try:
if dlg.ShowModal() != wx.ID_OK:
return
cmdLine = dlg.GetValue().strip()
finally:
dlg.Destroy()
opts = cmdLine.split()
opts.extend([imgPath, pyResPath])
tmp = sys.argv[0]
sys.argv[0] = 'Boa Constructor'
try:
img2py.main(opts)
finally:
sys.argv[0] = tmp
import sourceconst
header = (sourceconst.defSig % {
'modelIdent': 'PyImgResource',
'main': ''
}).strip()
if os.path.exists(pyResPath):
src = open(pyResPath, 'r').readlines()
if not (src and src[0].startswith(header)):
src.insert(0, header + '\n')
src.insert(1, '\n')
open(pyResPath, 'w').writelines(src)
m, c = editor.openOrGotoModule(pyResPath)
c.OnReload(None)
else:
wx.LogWarning(
_('Resource module not found. img2py failed to create the module'
))
def IsValidSelectedItem(self):
# check for selected item
if self.GetSelectedItemCount() == 0 or self.GetSelectedItemCount() > 1:
wx.LogWarning("Select only one bookmark!")
return False
itemindex = self.GetFirstSelected()
# check and ignore default text
if self.GetItemText(itemindex, col=1) == self.defaultColumnText:
return False
return True
def importExplorers(self, conf):
""" Import names defined in the config files to register them """
installTransports = ['Explorers.PrefsExplorer', 'Explorers.EditorExplorer'] +\
eval(conf.get('explorer', 'installedtransports'), {})
warned = False
for moduleName in installTransports:
warned = warned | importTransport(moduleName)
if warned:
wx.LogWarning(_('One or more transports could not be loaded, if the problem '
'is not rectifiable,\nconsider removing the transport under '
'Preferences->Plug-ins->Transports. Click "Details"'))
def edit_node_dialog(self):
"""display the edit node dialog"""
my_node_index = self.m_listctrl.GetFirstSelected()
if my_node_index == -1:
wx.LogWarning("Nothing selected, select à node first!")
return False
my_node = self.m_nodes[my_node_index]
assert(my_node)
myDlg = GKUINodeEditDialog(self.m_parent_frame, my_node)
if myDlg.ShowModal() == wx.ID_SAVE:
self.reload_list()
def logWarning_DEPRECATED(msg):
"""DEPRECATED. Rather use devide_app.logWarning().
"""
# create nice formatted string with tracebacks and all
ei = sys.exc_info()
#dmsg = \
# string.join(traceback.format_exception(ei[0],
# ei[1],
# ei[2]))
dmsgs = traceback.format_exception(ei[0], ei[1], ei[2])
# we can't disable the timestamp yet
# wxLog_SetTimestamp()
# set the detail message
for dmsg in dmsgs:
wx.LogWarning(dmsg)
# then the most recent
wx.LogWarning(msg)
# and flush... the last message will be the actual error
# message, what we did before will add to it to become the
# detail message
wx.Log_FlushActive()
def reload_path(self):
"""clear the list ctrl and parse the node paths"""
for path in self.m_node_paths:
if os.path.exists(path) is False:
wx.LogError("{} didn't exist!".format(path))
else:
for myfile in os.listdir(path):
if myfile.endswith(".gkn"): # node files
node = GKNode()
if node.load_from_file(myfile) is False:
wx.LogWarning("Error loading: {}".format(myfile))
else:
self.add_node_to_list(node)
# reload the node list
self.reload_list()
def refreshCtrl(self):
self.pos = self.GetCurrentPos()
selection = self.GetSelection()
prevVsblLn = self.GetFirstVisibleLine()
self._blockUpdate = True
try:
newData = self.getModelData()
curData = Utils.stringFromControl(self.GetText())
if newData != curData:
resetUndo = not self.CanUndo() and not curData
ro = self.GetReadOnly()
self.SetReadOnly(False)
self.SetText(Utils.stringToControl(newData))
self.SetReadOnly(ro)
if resetUndo:
self.EmptyUndoBuffer()
self.GotoPos(self.pos)
curVsblLn = self.GetFirstVisibleLine()
self.LineScroll(0, prevVsblLn - curVsblLn)
# XXX not preserving selection
self.SetSelection(*selection)
finally:
self._blockUpdate = False
if self.eol is None:
self.eol = Utils.getEOLMode(newData, self.defaultEOL)
self.SetEOLMode({
'\r\n': wx.stc.STC_EOL_CRLF,
'\r': wx.stc.STC_EOL_CR,
'\n': wx.stc.STC_EOL_LF
}[self.eol])
if not self.eolsChecked:
if Utils.checkMixedEOLs(newData):
wx.LogWarning(_('Mixed EOLs detected in %s, please use '
'Edit->Convert... to fix this problem.')\
%os.path.basename(self.model.filename))
self.eolsChecked = True
self.SetSavePoint()
self.nonUserModification = False
self.updatePageName()
self.updateFromAttrs()
def adjustBreakpoints(self, linesAdded, modType, evtPos):
line = self.LineFromPosition(evtPos) #event.GetPosition())
endline = self.GetLineCount()
if self.breaks.hasBreakpoint(min(line, endline), max(line, endline)):
changed = self.breaks.adjustBreakpoints(line, linesAdded)
debugger = self.model.editor.debugger
if debugger:
# XXX also check that module has been imported
# XXX this should apply; with or without breakpoint
if debugger.running and \
not modType & wx.stc.STC_PERFORMED_UNDO:
wx.LogWarning(
_('Adding or removing lines from the '
'debugger will cause the source and the '
'debugger to be out of sync.'
'\nPlease undo this action.'))
debugger.adjustBreakpoints(self.model.filename, line,
linesAdded)
else:
# bdb must still be updated
import bdb
bpList = bdb.Breakpoint.bplist
filename = self.model.filename #canonic form, same as url form I think
setBreaks = []
# store reference and remove from (fn, ln) refed dict.
for bpFile, bpLine in bpList.keys():
if bpFile == filename and bpLine > line:
setBreaks.append(bpList[bpFile, bpLine])
del bpList[bpFile, bpLine]
# put old break at new place and renumber
for brks in setBreaks:
for brk in brks:
brk.line = brk.line + linesAdded
# merge in moved breaks
if bpList.has_key((filename, brk.line)):
bpList[filename, brk.line].append(brk)
else:
bplist[filename, brk.line] = [brk]
def OnSelectSizer(self, event):
# XXX maybe move hasSizer/isSizer logic to WindowDTC ?
inspector = self.group.inspector
companion = self.group.selCompn
designer = companion.designer
if self.hasSizer:
if designer.sizersView:
s = companion.GetSizer(None)
for objInfo in designer.sizersView.objects.values():
if objInfo[1] == s:
compn = objInfo[0]
designer.sizersView.focus()
inspector.selectObject(compn)
designer.sizersView.selectCtrls([compn.name])
return
elif self.inSizer:
openCollEditorForSizerItem(inspector, companion)
designer.Raise()
else:
wx.LogWarning('Not part of a sizer')
def setComp(self, event):
self.flt.comp = []
compStr = self.compTextCtrl.GetValue()
if len(compStr) != 0:
try:
toks = compStr.replace(' ', '').split(',')
for tok in toks:
if '-' in tok:
low, high = (int(c) for c in tok.split('-'))
comp = range(low, high + 1)
else:
comp = [int(tok, )]
self.flt.comp += comp
except Exception as e:
self.flt.comp = []
wx.LogWarning('Invalid component config: %s.' % str(compStr))
self.flt.updateFilteredTrain()
self.updateTrace()
def logwarn(msg):
if is_cli:
logger.warn(msg)
else:
wx.LogWarning(msg)
def warn(self, msg):
if self.cli:
self.logger.warn(msg)
else:
wx.LogWarning(msg)