def setup(self):
""" connect to serial port, and load configuration file"""
# connect to serial port
port = self.cfg['config']['port']
self.ser = serial.Serial(port, 19200, timeout=0.5)
# load devices from
devices = []
relays = self.cfg['relays']
for k in relays:
dev = new_dev(self, k[0], k[1], relays[k]['addr'],
relays[k]['type'])
devices.append(dev)
self.engine.add_devices(devices)
# last step build the GW device
gw = Device("gateway.basic")
gw.address = self.cfg['config']['addr']
gw.vendor_id = "JKX"
gw.product_id = "HQ Product RF433 Gateway"
gw.version = 0.1
gw.info = "%s@%s" % (PACKAGE_NAME, platform.node())
emb = gw.new_attribute('embedded', [])
emb.value = [dev.address for dev in devices]
self.engine.add_device(gw)
def build_dev(dtype, addr):
dev = Device(dtype)
dev.address = addr
dev.vendor_id = "IHSEV"
dev.product_id = "OpenWeatherMap"
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
dev.url = "https://www.openweathermap.org"
dev.version = 0.2
return dev
def build_dev(dtype, addr):
dev = Device(dtype)
dev.address = addr
dev.vendor_id = "NETATMO"
dev.product_id = "NetatmoWeatherStation"
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
dev.url = "https://dev.netatmo.com/"
dev.version = 0.1
return dev
def setup_gw(self):
# last step build the GW device
gw = Device("gateway.basic")
gw.address = self.cfg['config']['addr']
gw.vendor_id = "IHSEV"
gw.product_id = "IPX-800 Ethernet Control System"
gw.version = 0.1
gw.url = "http://gce-electronics.com/fr/home/57-module-ip-rail-din-webserver-8-relais-ipx800-v3.html"
gw.info = "%s@%s" % (PACKAGE_NAME, platform.node())
emb = gw.new_attribute('embedded', [])
emb.value = [io.dev.address for io in self.in_out]
self.engine.add_device(gw)
def __init__(self):
self.addr = tools.get_random_uuid()
#print("My UUID is : %s" % self.addr)
self.engine = Engine()
self.dev = Device("cli.experimental", self.addr)
self.engine.add_device(self.dev)
def __init__(self, engine):
self.eng = engine
# new fake device
self.addr = tools.get_random_uuid()
self.dev = Device("cli.experimental", self.addr)
self.eng.add_device(self.dev)
self.eng.add_rx_handler(self.parse_answer)
print("xAAL Info dumper [%s]" % self.addr)
def setup():
""" setup xAAL Engine & Device. And start it in a Greenlet"""
helpers.setup_console_logger()
global monitor
engine = Engine()
cfg = tools.load_cfg(PACKAGE_NAME)
if not cfg:
logger.info('Missing config file, building a new one')
cfg = tools.new_cfg(PACKAGE_NAME)
cfg.write()
dev = Device("hmi.basic")
dev.address = cfg['config']['addr']
dev.vendor_id = "IHSEV"
dev.product_id = "WEB Interface"
dev.version = 0.1
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
engine.add_device(dev)
db_server = None
if 'db_server' in cfg['config']:
db_server = cfg['config']['db_server']
else:
logger.info('You can set "db_server" in the config file')
monitor = Monitor(dev, filter_func=monitor_filter, db_server=db_server)
monitor.subscribe(event_handler)
engine.start()
green_let = Greenlet(xaal_loop, engine)
green_let.start()
def setup_gw(self):
# last step build the GW device
gw = Device("gateway.basic")
gw.address = self.cfg['config']['addr']
gw.vendor_id = "DIY Wireless Bug"
gw.product_id = "bugOne Gateway"
gw.version = 0.3
gw.url = "http://dwb.ilhost.fr/"
gw.info = "%s@%s" % (PACKAGE_NAME, platform.node())
emb = gw.new_attribute('embedded', [])
for node in self.nodes.values():
for dev in node.get_devices():
emb.value.append(dev.address)
self.engine.add_device(gw)
def __init__(self):
self.addr = tools.get_random_uuid()
self.engine = Engine()
self.dev = Device("cli.experimental", self.addr)
self.dev.vendor_id = 'IHSEV'
self.dev.info = 'chute'
self.engine.add_device(self.dev)
self.threadlist = []
self.fallEvent = threading.Event()
self.pepper = Pepper(self)
self.kinect = Kinect()
self.sensfloor = Sensfloor(self.engine)
def build_dev(addr, devtype):
dev = Device(devtype)
dev.address = addr
dev.vendor_id = "DIY Wireless Bug"
dev.url = "http://dwb.ilhost.fr/"
dev.version = 0.3
return dev
def setup(self):
dev = Device("logger.basic")
dev.address = self.cfg['addr']
dev.vendor_id = "IHSEV"
dev.product_id = "WARP10 Logger"
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
self.eng.add_device(dev)
self.http = urllib3.PoolManager()
def monitor_example(engine):
# load config
cfg = tools.load_cfg_or_die(PACKAGE_NAME)
# create a device & register it
dev = Device("hmi.basic")
dev.address = cfg['config']['addr']
dev.vendor_id = "IHSEV"
dev.product_id = "Monitor Example"
dev.version = 0.1
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
engine.add_device(dev)
# start the monitoring
mon = Monitor(dev)
mon.subscribe(display_event)
return mon
def setup(self):
cfg = self.cfg
client = influxdb.InfluxDBClient(
host=cfg['host'],
port=int(cfg['port']),
username=cfg['user'],
password=cfg['password'],
database=cfg['database'],
ssl=(cfg['ssl'] == "true"))
self.influxdb = client
dev = Device("logger.basic")
dev.address = self.cfg['addr']
dev.vendor_id = "IHSEV"
dev.product_id = "InfluxDB Logger"
dev.url = "https://www.influxdata.com"
dev.version = 0.1
dev.info = "%s@%s:%s" % (cfg['database'],cfg['host'],cfg['port'])
self.eng.add_device(dev)
def setup_xaal():
""" setup xAAL Engine & Device. And start it in a Greenlet"""
global monitor
engine = Engine()
cfg = tools.load_cfg_or_die(PACKAGE_NAME)
dev = Device("hmi.basic")
dev.address = cfg['config']['addr']
dev.vendor_id = "IHSEV"
dev.product_id = "REST API"
dev.version = 0.1
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
engine.add_device(dev)
monitor = Monitor(dev, filter_func=monitor_filter)
engine.start()
green_let = Greenlet(xaal_loop, engine)
green_let.start()
def setup(self):
""" connect to mqtt server & register xaal dev"""
cfg = self.cfg
client = mqtt.Client(client_id=cfg['client_id'],
clean_session=True,
userdata=None,
protocol=mqtt.MQTTv31)
client.username_pw_set(cfg['username'], cfg['password'])
client.connect(host=cfg['host'],
port=int(cfg['port']),
keepalive=60,
bind_address="")
client.loop_start()
self.mqtt = client
dev = Device("logger.basic")
dev.address = self.cfg['addr']
dev.vendor_id = "IHSEV"
dev.product_id = "MQTT Logger"
dev.info = "%s@%s:%s" % (cfg['client_id'], cfg['host'], cfg['port'])
self.eng.add_devices([
dev,
])
def setup(self):
addr = self.cfg['config']['addr']
dev = Device("metadatadb.basic")
dev.address = addr
dev.vendor_id = "IHSEV"
dev.product_id = "Metadata database"
dev.version = 0.1
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
dev.add_method('getDevices', self.get_devices)
dev.add_method('getKeysValues', self.get_keys_values)
dev.add_method('getValue', self.get_value)
dev.add_method('updateKeysValues', self.update_keys_values)
dev.add_method('addKeysValues', self.add_keys_values)
self.dev = dev
self.engine.add_device(dev)
self.engine.add_timer(self.periodic_save, 60)
def main(addr):
if addr == None:
addr = tools.get_random_uuid()
dev = Device("lamp.dimmer", addr)
dev.product_id = 'Dummy Dimming Lamp'
dev.url = 'http://www.acme.org'
# attributes
light = dev.new_attribute('light')
dimmer = dev.new_attribute('dimmer', 50)
dev.dump()
# methods
def on():
light.value = True
print("%s ON" % dev)
def off():
light.value = False
print("%s OFF" % dev)
def dim(_target):
dimmer.value = _target
print("Dimming to %d" % _target)
dev.add_method('on', on)
dev.add_method('off', off)
dev.add_method('dim', dim)
eng = Engine()
eng.add_device(dev)
eng.run()
def __init__(self,ipx,channel,addr,state_name,group):
dev = Device("changeme.basic",addr)
dev.vendor_id = "IHSEV"
dev.version = 0.1
dev.hw_id = channel
dev.group_id = group
# attribute
self.state = dev.new_attribute(state_name)
# method
dev.add_method('on',self.on)
dev.add_method('off',self.off)
self.chan = channel
self.ipx = ipx
self.dev = dev
def main(addr):
if addr == None:
addr = tools.get_random_uuid()
dev = Device("controlerMedia.basic", addr)
dev.product_id = 'Controler DLNA'
dev.url = 'http://www.acme.org'
# attributes
destination_media = dev.new_attribute('destination_media')
source_media = dev.new_attribute('source_media')
state_media = dev.new_attribute('state_media')
position_media = dev.new_attribute('position_media')
dev.dump()
# methods
def get_attributes():
print("Attributs")
########### Ensemble des methodes liees a la mise en place du media ##########
def set_destination(_dest):
# Met la valeur du media player a utiliser dans la variable "destination_media"
destination_media.value = _dest
print("Destination \"" + _dest + "\" is set")
def get_destinations():
# Interroge le dBus pour connaitre les media renderer en DLNA
# Envoie à l'utilisateur les destinations sous forme de liste
available_dest = {"renderer1": "salon", "renderer2": "cuisine"}
print("Display destinations")
return available_dest
def set_source(_src):
# Met la valeur du media server a utiliser dans la variable "source_media"
source_media.value = _src
print("Source \"" + _src + "\" is set")
def get_sources():
# Interroge le dBus pour connaitre les media server en DLNA
# Envoie à l'utilisateur les medias sous forme de liste
available_media = {"media1": "NAS\\video1", "media2": "NAS\\video2"}
print("Display sources")
return available_media
########## Ensemble des methodes liees a l'etat du media lorsqu'il est en cours de lecture #########
def play():
state_media.value = True
# Commande DLNA pour lancer le media
print("%s Play" % dev)
def pause():
state_media.value = False
# Commande DLNA pour mettre le media sur pause
print("%s Pause" % dev)
def stop():
print("Media is stop")
def next():
print("Next media is play")
def prev():
print("Previous media is play")
def moving_forward():
print("Media is forwarding of 10 secondes")
def moving_back():
print("Media is backing of 10 secondes")
dev.add_method('get_attributes', get_attributes)
dev.add_method('set_destination', set_destination)
dev.add_method('get_destinations', get_destinations)
dev.add_method('set_source', set_source)
dev.add_method('get_sources', get_sources)
dev.add_method('play', play)
dev.add_method('pause', pause)
dev.add_method('stop', stop)
dev.add_method('next', next)
dev.add_method('prev', prev)
dev.add_method('moving_forward', moving_forward)
dev.add_method('moving_back', moving_back)
eng = Engine()
eng.add_device(dev)
eng.run()
print("Welcome,\n")
print("Please choose the action (n°):")
print("1. play")
print("2. pause")
print("3. destination")
print("4. source")
print("\n0. Quit")
choice = input(" >> ")
exec_menu(choice)
# Main definition
addr = "f2fc6dac-4ffb-11ea-a473-0800276d39fa"
dev = Device("basic.basic", addr)
eng = Engine()
eng.add_device(dev)
addrMedia = ""
compteur_attente_dest = 0
compteur_attente_src = 0
# Menu definition
menu_actions = {
'main_menu': main,
'1': play,
'2': pause,
'3': set_destination,
'4': set_source,
'9': back,
'0': exit,
def new_dev(gw, key, channel, addr, dtype):
""" create e new xAAL device """
dev = None
if dtype == 'lamp':
dev = Device("lamp.basic", addr)
dev.product_id = "Lamp on HQ Product RF433 power relay"
var = dev.new_attribute('light')
else:
dev = Device("powerrelay.basic", addr)
dev.product_id = "HQ Product RF433 power relay"
var = dev.new_attribute('power')
dev.vendor_id = "JKX"
dev.hw_id = '%s%s' % (key, channel)
dev.version = 0.2
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
# methods
def on():
if gw.switch_relay('ON', key, channel):
var.value = True
def off():
if gw.switch_relay('OFF', key, channel):
var.value = False
dev.add_method('on', on)
dev.add_method('off', off)
return dev
def main(addr):
if addr == None:
addr = tools.get_random_uuid()
dev = Device("switch.basic",addr)
dev.product_id = 'One Simple test of Switch'
dev.url = 'http://www.acme.org'
# attributes
state = dev.new_attribute('state')
dev.dump()
# methods
def on():
state.value = True
print("%s ON" % dev)
def off():
state.value = False
print("%s OFF" %dev)
dev.add_method('on',on)
dev.add_method('off',off)
eng = Engine()
eng.add_device(dev)
#eng.run()
eng.start()
import time, random, sys
from xaal.lib import Engine, Device, tools
target = sys.argv[-1]
dev = Device("switch.basic", tools.get_random_uuid())
eng = Engine()
eng.start()
while 1:
eng.send_request(dev, [
target,
], 'dim', {'target': random.randint(0, 100)})
eng.loop()
time.sleep(5)
eng.send_request(dev, [
target,
], 'on')
print('ON')
eng.loop()
time.sleep(3)
eng.send_request(dev, [
target,
], 'off')
print('OFF')
eng.loop()
time.sleep(3)
def main(addr):
if addr == None:
addr = tools.get_random_uuid()
dev = Device("powerrelay.basic", addr)
dev.product_id = 'Dummy Power Relay'
dev.url = 'http://www.acme.org'
# attributes
power = dev.new_attribute('power')
dev.dump()
# methods
def on():
power.value = True
print("%s ON" % dev)
def off():
power.value = False
print("%s OFF" % dev)
dev.add_method('on', on)
dev.add_method('off', off)
eng = Engine()
eng.add_device(dev)
eng.run()