def main():
global log
try:
try:
opts, args = getopt.getopt(sys.argv[1:], 'cdf:s:o:', [])
except getopt.GetoptError:
usage()
sys.exit(2)
try:
# timeout=0 causes it to raise AlreadyLocked. Any timeout >0
# causes LockTimeout
global_lock.acquire(timeout=0)
except lockfile.AlreadyLocked:
log.error('Another copy of this program is running')
sys.exit(1)
atexit.register(cleanup)
console = False
debug_mode = False
port = SERIAL_PORT;
cfg_fname = CFG_FILE
data_fname = DATA_FILE
for o, a in opts:
if o in ['-s']:
port = a
elif o in ['-f']:
cfg_fname = a
elif o in ['-o']:
data_fname = a
elif o in ['-c']:
console = True
elif o in ['-d']:
debug_mode = True
else:
usage()
sys.exit(1)
log_format = '%(asctime)s %(process)d %(filename)s:%(lineno)d %(levelname)s %(message)s'
if debug_mode:
log_level=logging.DEBUG
else:
log_level=logging.INFO
if console:
logging.basicConfig(level=log_level, format=log_format)
else:
logging.basicConfig(level=log_level, format=log_format,
filename=MAIN_LOGFILE, filemode='a')
log = logging.getLogger('default')
try:
cfg = read_config(cfg_fname)
except Exception, ex:
log.error("Error reading config file %s" % ex)
sys.exit(1)
log.info('Using serial port %s' % port)
s = serial.serialposix.Serial(port=port,
baudrate=9600, bytesize=8, parity='N', stopbits=1,
timeout=120,
rtscts=1)
log.info("Starting collection")
data_file = file(data_fname, 'a')
pkt_reader = xbee_api.read_packet(s)
while True:
pkt = pkt_reader.next()
try:
sensor_address = str(pkt.address)
try:
scfg = cfg[sensor_address]
vref = scfg["vref"]
battery_k = scfg["vccK"]
except KeyError:
log.warning("No config for sensor '%s'. Using defaults" % sensor_address)
vref = VREF
battery_k = BATTERY_K
radc0 = pkt.get_adc(0)
radc1 = pkt.get_adc(1)
adc0 = float(get_adc_v(pkt,0,vref))
adc1 = float(get_adc_v(pkt,1,vref))
battery_V = get_battery_from_adc(adc1,battery_k)/1000.0
temp_C = tmp36.get_t_from_adc(adc0)
log.info('A={0} T={1:.1f}C V={2:.3f}V'.format(
pkt.address,
temp_C, battery_V))
csv_report = '{0},{1},{2},{3},{4:.1f},{5:.3f}\n'.format(
time.time(), pkt.address, radc0, radc1, temp_C, battery_V*1000.0)
if not debug_mode:
try:
data_file.write(csv_report)
data_file.flush()
except IOError, ex:
log.error("Error writing CSV file: %s" % ex)
except IndexError, e:
# I get this from pkt.get_adc() when packet is broken
log.error('Broken XBee packet: "{0}"'.format(pkt))
def main():
global logger
log_format = '%(asctime)s %(process)d %(filename)s:%(lineno)d %(levelname)s %(message)s'
logging.basicConfig(level=logging.INFO,
format=log_format,
filename=MAIN_LOGFILE,
filemode='w')
logger = logging.getLogger('default')
try:
try:
opts, args = getopt.getopt(sys.argv[1:], 's:nc', [])
except getopt.GetoptError:
usage()
sys.exit(2)
try:
# timeout=0 causes it to raise AlreadyLocked. Any timeout >0
# causes LockTimeout
global_lock.acquire(timeout=0)
except lockfile.AlreadyLocked:
logger.error('Another copy of this program is running')
sys.exit(1)
atexit.register(cleanup)
serial_port= '/dev/ttyS0'
send_to_data_logger = True
console = False
for o, a in opts:
if o in ['-s']:
serial_port = a
elif o in ['-n']:
send_to_data_logger = False
elif o in ['-c']:
console = True
else:
usage()
sys.exit(1)
print 'Using serial port %s' % serial_port
print 'Sending to data_logger: %s' % send_to_data_logger
s = serial.serialposix.Serial(port=serial_port,
baudrate=9600, bytesize=8, parity='N', stopbits=1,
timeout=120,
rtscts=1)
s.open()
battery_file = file(BATTERY_DATA_FILE, 'a')
data_logger_update_time = time.time()
battery_log_time = time.time()
pachube_feed = pachube.PachubeFeed(feed_id=PACHUBE_FEED_ID)
pkt_reader = xbee_api.read_packet(s)
while True:
pkt = pkt_reader.next()
try:
adc0 = float(pkt.get_adc(0))
adc1 = float(pkt.get_adc(1))
temp_C = tmp36.get_t_from_adc(adc1)
# res = thermistor.get_res_from_adc(adc1)
# temp_C = thermistor.get_t(res)
# temp_F = 32 + temp_C * 5 / 9
# send to data_logger every 5 min
time_now = time.time()
if time_now >= data_logger_update_time:
if send_to_data_logger:
pachube_feed.datastream_update({'temp': temp_C, 'Vbatt': adc0})
data_logger_update_time += DATA_LOGGER_UPDATE_INTERVAL
if time_now > data_logger_update_time:
# this happens if we got stuck in pkt_reader.next() for a long time
# and data_logger_update_time is in the past
data_logger_update_time = time_now + DATA_LOGGER_UPDATE_INTERVAL
if time_now >= battery_log_time:
record_battery_v(battery_file, adc0)
battery_log_time += BATTERY_LOG_INTERVAL
if time_now > battery_log_time:
battery_log_time = time_now + BATTERY_LOG_INTERVAL
report = 'packet_size={0} adc0={1:.3f} mV adc1={2:.3f} mV T={3:.1f} C'.format(
pkt.packet_size, adc0, adc1, temp_C)
if console:
print report
else:
logger.info(report)
except IndexError, e:
# I get this from pkt.get_adc() when packet is broken
logger.error('Broken XBee packet: "{0}"'.format(pkt))
except serial.SerialException,e:
print e