def Activated(self, shapeType=None):
self.ShapeType = shapeType
name = DraftTools.translate("draft", "Rectangle")
DraftTools.Creator.Activated(self, name)
if self.ui:
self.refpoint = None
self.ui.pointUi(name)
self.ui.extUi()
self.call = self.view.addEventCallback("SoEvent", self.action)
self.rect = trackers.rectangleTracker()
Utils.EB_Print.print_msg(
DraftTools.translate("draft", "Pick first point:") + "\n")
def Activated(self):
wires = FreeCADGui.Selection.getSelection()
if not wires:
FCC.PrintError("CommandFillet: two elements needed" + "\n")
return
if len(wires) != 2:
FCC.PrintError("CommandFillet: two elements needed" + "\n")
return
for o in wires:
FCC.PrintMessage("CommandFillet: " + Draft.getType(o) + "\n")
# Choose only wires.
# A test could be used to chose edges in general.
if Draft.getType(o) not in "Wire":
FCC.PrintError("CommandFillet: wires needed" + "\n")
return
doc = 'FreeCAD.ActiveDocument.'
_wires = '[' + doc + wires[0].Name + ', ' + doc + wires[1].Name + ']'
rems = [doc + 'removeObject("' + o.Name + '")' for o in wires]
FreeCADGui.addModule("Draft")
func = DraftTools.translate("draft", "Create fillet")
arg = [
'arc = DraftFillet.makeFillet(' + _wires + ')', *rems,
'Draft.autogroup(arc)', 'FreeCAD.ActiveDocument.recompute()'
]
DraftGui.todo.delayCommit([(func, arg)])
def Initialize(self):
# run self-tests
depsOK = False
try:
from pivy import coin
if FreeCADGui.getSoDBVersion() != coin.SoDB.getVersion():
raise AssertionError("FreeCAD and Pivy use different versions of Coin. This will lead to unexpected behaviour.")
except AssertionError:
FreeCAD.Console.PrintWarning("Error: FreeCAD and Pivy use different versions of Coin. This will lead to unexpected behaviour.\n")
except ImportError:
FreeCAD.Console.PrintWarning("Error: Pivy not found, Draft workbench will be disabled.\n")
except:
FreeCAD.Console.PrintWarning("Error: Unknown error while trying to load Pivy\n")
else:
try:
import PyQt4
except ImportError:
FreeCAD.Console.PrintWarning("Error: PyQt4 not found, Draft workbench will be disabled.\n")
else:
depsOK = True
if not depsOK:
return
try:
import os,macros,DraftTools,DraftGui,Draft_rc
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
if not hasattr(FreeCADGui.draftToolBar,"loadedPreferences"):
FreeCADGui.addPreferencePage(":/ui/userprefs-base.ui","Draft")
FreeCADGui.addPreferencePage(":/ui/userprefs-import.ui","Draft")
FreeCADGui.draftToolBar.loadedPreferences = True
self.appendMenu(["&Macro",str(DraftTools.translate("draft","Installed Macros"))],macros.macrosList)
Log ('Loading Draft module...done\n')
except:
pass
self.cmdList = ["Draft_Line","Draft_Wire","Draft_Circle","Draft_Arc","Draft_Ellipse",
"Draft_Polygon","Draft_Rectangle", "Draft_Text",
"Draft_Dimension", "Draft_BSpline","Draft_Point",
"Draft_ShapeString"]
self.modList = ["Draft_Move","Draft_Rotate","Draft_Offset",
"Draft_Trimex", "Draft_Upgrade", "Draft_Downgrade", "Draft_Scale",
"Draft_Drawing","Draft_Edit","Draft_WireToBSpline","Draft_AddPoint",
"Draft_DelPoint","Draft_Shape2DView","Draft_Draft2Sketch","Draft_Array",
"Draft_Clone","Draft_Heal"]
self.treecmdList = ["Draft_ApplyStyle","Draft_ToggleDisplayMode","Draft_AddToGroup",
"Draft_SelectGroup","Draft_SelectPlane","Draft_ToggleSnap",
"Draft_ShowSnapBar","Draft_ToggleGrid"]
self.lineList = ["Draft_UndoLine","Draft_FinishLine","Draft_CloseLine"]
self.appendToolbar(str(DraftTools.translate("draft","Draft creation tools")),self.cmdList)
self.appendToolbar(str(DraftTools.translate("draft","Draft modification tools")),self.modList)
self.appendMenu(str(DraftTools.translate("draft","&Draft")),self.cmdList+self.modList)
self.appendMenu([str(DraftTools.translate("draft","&Draft")),str(DraftTools.translate("draft","Context tools"))],self.treecmdList)
self.appendMenu([str(DraftTools.translate("draft","&Draft")),str(DraftTools.translate("draft","Wire tools"))],self.lineList)
def Initialize(self):
import DraftTools,DraftGui,Arch_rc,Arch
self.archtools = ["Arch_Wall","Arch_Structure",
"Arch_Floor","Arch_Building","Arch_Site",
"Arch_Window","Arch_Roof","Arch_Axis",
"Arch_SectionPlane","Arch_Add","Arch_Remove"]
self.drafttools = ["Draft_Line","Draft_Wire","Draft_Rectangle",
"Draft_Polygon","Draft_Arc",
"Draft_Circle","Draft_Dimension",
"Draft_Move","Draft_Rotate",
"Draft_Offset","Draft_Upgrade",
"Draft_Downgrade","Draft_Trimex"]
self.draftcontexttools = ["Draft_ApplyStyle","Draft_ToggleDisplayMode",
"Draft_AddToGroup","Draft_SelectGroup",
"Draft_SelectPlane","Draft_ToggleSnap",
"Draft_ShowSnapBar","Draft_ToggleGrid"]
self.meshtools = ["Arch_SplitMesh","Arch_MeshToShape",
"Arch_SelectNonSolidMeshes","Arch_RemoveShape"]
self.appendToolbar(str(DraftTools.translate("arch","Arch tools")),self.archtools)
self.appendToolbar(str(DraftTools.translate("arch","Draft tools")),self.drafttools)
self.appendMenu([str(DraftTools.translate("arch","&Architecture")),str(DraftTools.translate("arch","Conversion Tools"))],self.meshtools)
self.appendMenu(str(DraftTools.translate("arch","&Architecture")),self.archtools)
self.appendMenu(str(DraftTools.translate("arch","&Draft")),self.drafttools+self.draftcontexttools)
FreeCADGui.addIconPath(":/icons")
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addPreferencePage(":/ui/archprefs-base.ui","Arch")
Log ('Loading Arch module... done\n')
def appendPoint(self, point):
self.node.append(point)
if (len(self.node) > 1):
self.rect.update(point)
self.createObject()
else:
Utils.EB_Print.print_msg(
DraftTools.translate("draft", "Pick opposite point:") + "\n")
self.ui.setRelative()
self.rect.setorigin(point)
self.rect.on()
if self.planetrack:
self.planetrack.set(point)
def Initialize(self):
import DraftTools, DraftGui, Arch_rc, Arch
self.archtools = [
"Arch_Wall", "Arch_Structure", "Arch_Floor", "Arch_Building",
"Arch_Site", "Arch_Window", "Arch_Roof", "Arch_Axis",
"Arch_SectionPlane", "Arch_Add", "Arch_Remove"
]
self.drafttools = [
"Draft_Line", "Draft_Wire", "Draft_Rectangle", "Draft_Polygon",
"Draft_Arc", "Draft_Circle", "Draft_Dimension", "Draft_Move",
"Draft_Rotate", "Draft_Offset", "Draft_Upgrade", "Draft_Downgrade",
"Draft_Trimex"
]
self.draftcontexttools = [
"Draft_ApplyStyle", "Draft_ToggleDisplayMode", "Draft_AddToGroup",
"Draft_SelectGroup", "Draft_SelectPlane", "Draft_ToggleSnap",
"Draft_ShowSnapBar", "Draft_ToggleGrid"
]
self.meshtools = [
"Arch_SplitMesh", "Arch_MeshToShape", "Arch_SelectNonSolidMeshes",
"Arch_RemoveShape"
]
self.appendToolbar(str(DraftTools.translate("arch", "Arch tools")),
self.archtools)
self.appendToolbar(str(DraftTools.translate("arch", "Draft tools")),
self.drafttools)
self.appendMenu([
str(DraftTools.translate("arch", "&Architecture")),
str(DraftTools.translate("arch", "Conversion Tools"))
], self.meshtools)
self.appendMenu(str(DraftTools.translate("arch", "&Architecture")),
self.archtools)
self.appendMenu(str(DraftTools.translate("arch", "&Draft")),
self.drafttools + self.draftcontexttools)
FreeCADGui.addIconPath(":/icons")
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addPreferencePage(":/ui/archprefs-base.ui", "Arch")
Log('Loading Arch module... done\n')
def Initialize(self):
# run self-tests
depsOK = False
try:
from pivy import coin
if FreeCADGui.getSoDBVersion() != coin.SoDB.getVersion():
raise AssertionError(
"FreeCAD and Pivy use different versions of Coin. This will lead to unexpected behaviour."
)
except AssertionError:
FreeCAD.Console.PrintWarning(
"Error: FreeCAD and Pivy use different versions of Coin. This will lead to unexpected behaviour.\n"
)
except ImportError:
FreeCAD.Console.PrintWarning(
"Error: Pivy not found, Draft workbench will be disabled.\n")
except:
FreeCAD.Console.PrintWarning(
"Error: Unknown error while trying to load Pivy\n")
else:
try:
import PyQt4
except ImportError:
FreeCAD.Console.PrintWarning(
"Error: PyQt4 not found, Draft workbench will be disabled.\n"
)
else:
depsOK = True
if depsOK:
import Draft_rc
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
FreeCADGui.addPreferencePage(":/ui/userprefs-base.ui", "Draft")
FreeCADGui.addPreferencePage(":/ui/userprefs-import.ui", "Draft")
else:
return
try:
import macros, DraftTools, DraftGui
self.appendMenu([
"&Macro",
str(DraftTools.translate("draft", "Installed Macros"))
], macros.macrosList)
Log('Loading Draft GUI...done\n')
except:
pass
self.cmdList = [
"Draft_Line", "Draft_Wire", "Draft_Circle", "Draft_Arc",
"Draft_Polygon", "Draft_Rectangle", "Draft_Text",
"Draft_Dimension", "Draft_BSpline", "Draft_Point"
]
self.modList = [
"Draft_Move", "Draft_Rotate", "Draft_Offset", "Draft_Trimex",
"Draft_Upgrade", "Draft_Downgrade", "Draft_Scale", "Draft_Drawing",
"Draft_Edit", "Draft_WireToBSpline", "Draft_AddPoint",
"Draft_DelPoint", "Draft_Shape2DView", "Draft_Draft2Sketch",
"Draft_Array"
]
self.treecmdList = [
"Draft_ApplyStyle", "Draft_ToggleDisplayMode", "Draft_AddToGroup",
"Draft_SelectGroup", "Draft_SelectPlane", "Draft_ToggleSnap",
"Draft_ShowSnapBar"
]
self.lineList = [
"Draft_UndoLine", "Draft_FinishLine", "Draft_CloseLine"
]
self.appendToolbar(
str(DraftTools.translate("draft", "Draft creation tools")),
self.cmdList)
self.appendToolbar(
str(DraftTools.translate("draft", "Draft modification tools")),
self.modList)
self.appendMenu(str(DraftTools.translate("draft", "&Draft")),
self.cmdList + self.modList)
self.appendMenu([
str(DraftTools.translate("draft", "&Draft")),
str(DraftTools.translate("draft", "Display options"))
], self.treecmdList)
self.appendMenu([
str(DraftTools.translate("draft", "&Draft")),
str(DraftTools.translate("draft", "Wire tools"))
], self.lineList)
def Initialize(self):
import DraftTools,DraftGui,Arch_rc,Arch,Draft_rc
# arch tools
self.archtools = ["Arch_Wall","Arch_Structure",
"Arch_Floor","Arch_Building","Arch_Site",
"Arch_Window","Arch_Roof","Arch_Axis",
"Arch_SectionPlane","Arch_Add","Arch_Remove"]
self.meshtools = ["Arch_SplitMesh","Arch_MeshToShape",
"Arch_SelectNonSolidMeshes","Arch_RemoveShape",
"Arch_CloseHoles"]
self.calctools = ["Arch_Check"]
# draft tools
self.drafttools = ["Draft_Line","Draft_Wire","Draft_Circle","Draft_Arc",
"Draft_Polygon","Draft_Rectangle", "Draft_Text",
"Draft_Dimension", "Draft_BSpline","Draft_Point"]
self.draftmodtools = ["Draft_Move","Draft_Rotate","Draft_Offset",
"Draft_Trimex", "Draft_Upgrade", "Draft_Downgrade", "Draft_Scale",
"Draft_Drawing","Draft_Edit","Draft_WireToBSpline","Draft_AddPoint",
"Draft_DelPoint","Draft_Shape2DView","Draft_Draft2Sketch","Draft_Array",
"Draft_Clone","Draft_Heal"]
self.draftcontexttools = ["Draft_ApplyStyle","Draft_ToggleDisplayMode","Draft_AddToGroup",
"Draft_SelectGroup","Draft_SelectPlane","Draft_ToggleSnap",
"Draft_ShowSnapBar","Draft_ToggleGrid","Draft_UndoLine",
"Draft_FinishLine","Draft_CloseLine"]
self.appendToolbar(str(DraftTools.translate("arch","Arch tools")),self.archtools)
self.appendToolbar(str(DraftTools.translate("arch","Draft tools")),self.drafttools)
self.appendToolbar(str(DraftTools.translate("arch","Draft mod tools")),self.draftmodtools)
self.appendMenu([str(DraftTools.translate("arch","&Architecture")),str(DraftTools.translate("arch","Conversion Tools"))],self.meshtools)
self.appendMenu([str(DraftTools.translate("arch","&Architecture")),str(DraftTools.translate("arch","Calculation Tools"))],self.calctools)
self.appendMenu(str(DraftTools.translate("arch","&Architecture")),self.archtools)
self.appendMenu(str(DraftTools.translate("arch","&Draft")),self.drafttools+self.draftmodtools)
self.appendMenu([str(DraftTools.translate("arch","&Draft")),str(DraftTools.translate("arch","Context Tools"))],self.draftcontexttools)
FreeCADGui.addIconPath(":/icons")
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addPreferencePage(":/ui/archprefs-base.ui","Arch")
if not hasattr(FreeCADGui.draftToolBar,"loadedPreferences"):
FreeCADGui.addPreferencePage(":/ui/userprefs-base.ui","Draft")
FreeCADGui.addPreferencePage(":/ui/userprefs-import.ui","Draft")
FreeCADGui.draftToolBar.loadedPreferences = True
Log ('Loading Arch module... done\n')
def Initialize(self):
import DraftTools,DraftGui,Arch_rc,Arch,Draft_rc
# arch tools
self.archtools = ["Arch_Wall","Arch_Structure",
"Arch_Floor","Arch_Building","Arch_Site",
"Arch_Window","Arch_Roof","Arch_Axis",
"Arch_SectionPlane","Arch_Add","Arch_Remove"]
self.meshtools = ["Arch_SplitMesh","Arch_MeshToShape",
"Arch_SelectNonSolidMeshes","Arch_RemoveShape",
"Arch_CloseHoles","Arch_MergeWalls"]
self.calctools = ["Arch_Check"]
# draft tools
self.drafttools = ["Draft_Line","Draft_Wire","Draft_Circle","Draft_Arc","Draft_Ellipse",
"Draft_Polygon","Draft_Rectangle", "Draft_Text",
"Draft_Dimension", "Draft_BSpline","Draft_Point"]
self.draftmodtools = ["Draft_Move","Draft_Rotate","Draft_Offset",
"Draft_Trimex", "Draft_Upgrade", "Draft_Downgrade", "Draft_Scale",
"Draft_Drawing","Draft_Edit","Draft_WireToBSpline","Draft_AddPoint",
"Draft_DelPoint","Draft_Shape2DView","Draft_Draft2Sketch","Draft_Array",
"Draft_Clone","Draft_Heal"]
self.draftcontexttools = ["Draft_ApplyStyle","Draft_ToggleDisplayMode","Draft_AddToGroup",
"Draft_SelectGroup","Draft_SelectPlane","Draft_ToggleSnap",
"Draft_ShowSnapBar","Draft_ToggleGrid","Draft_UndoLine",
"Draft_FinishLine","Draft_CloseLine"]
self.appendToolbar(str(DraftTools.translate("arch","Arch tools")),self.archtools)
self.appendToolbar(str(DraftTools.translate("arch","Draft tools")),self.drafttools)
self.appendToolbar(str(DraftTools.translate("arch","Draft mod tools")),self.draftmodtools)
self.appendMenu([str(DraftTools.translate("arch","&Architecture")),str(DraftTools.translate("arch","Conversion Tools"))],self.meshtools)
self.appendMenu([str(DraftTools.translate("arch","&Architecture")),str(DraftTools.translate("arch","Calculation Tools"))],self.calctools)
self.appendMenu(str(DraftTools.translate("arch","&Architecture")),self.archtools)
self.appendMenu(str(DraftTools.translate("arch","&Draft")),self.drafttools+self.draftmodtools)
self.appendMenu([str(DraftTools.translate("arch","&Draft")),str(DraftTools.translate("arch","Context Tools"))],self.draftcontexttools)
FreeCADGui.addIconPath(":/icons")
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addPreferencePage(":/ui/archprefs-base.ui","Arch")
if not hasattr(FreeCADGui.draftToolBar,"loadedPreferences"):
FreeCADGui.addPreferencePage(":/ui/userprefs-base.ui","Draft")
FreeCADGui.addPreferencePage(":/ui/userprefs-import.ui","Draft")
FreeCADGui.draftToolBar.loadedPreferences = True
Log ('Loading Arch module... done\n')
